DELL EMC D-PDC-DY-23 Practice Questions Dell PowerSwitch Data Center Deploy 2023 Order our D-PDC-DY-23 Practice Questions Today and Get Ready to Pass with Flying Colors!
D-PDC-DY-23 Practice Exam Features | QuestionsTube Latest & Updated Exam Questions Subscribe to FREE Updates Both PDF & Exam Engine Download Directly Without Waiting https://www.questionstube.com/exam/d-pdc-dy-23/ At QuestionsTube, you can read D-PDC-DY-23 free demo questions in pdf file, so you can check the questions and answers before deciding to download the DELL EMC D-PDC-DY-23 practice questions. These free demo questions are parts of the D-PDC-DY-23 exam questions. Download and read them carefully, you will find that the D-PDC-DY-23 test questions of QuestionsTube will be your great learning materials online. Share some D-PDC-DY-23 exam online
questions below.
1.How many VRRP groups can be configured on a VRRP router? A. 128 B. 255 C. 256 D. 512 Answer: B
ie
ve
S
uc c
es s
2.What do bridge protocol data units provide? A. Special data frames to exchange STP information B. Metadata transferred connecting two network bridges C. Configuration data exchanged during a VLTi setup D. Bridge information part of the LLDP protocol Answer: A
r -Y ou s ti on
-2 3
E
xa m
Q
ue s
4.What are mandatory LLDPDU TLV's? A. 0123 B. 0124 C. 0456 D. 1234 Answer: A
P
re pa ra
ti
on
S
ol ut
io n
to
A ch
3.Which command mode allows configuration of switches L2 and L3 interfaces? A. EXEC Mode B. Interface C. Configuration D. Global Answer: B
U
pd at
ed
D
-P
D
C
-D
Y
5.In a PIM Sparse Mode (PIM-SM) based multicast topology, what function does the Rendezvous Point provide? A. The node is used to provide IGMP snooping across a layer 3 boundary. B. The root node of the source tree topology is used to provide routing between the source and receiver. C. The root node of the shared tree topology is used to provide routing between the source and receiver. D. The node is used to provide IGMP snooping on a layer 2 shared segment. Answer: C
6.A router needs to be configured to allow multiple multicast servers for the same group to be presented only to ports where active listeners reside. Each listener may exclude non-preferred servers. What is the minimum multicast configuration level required on the router? A. IGMPv3 without snooping PIM-SSM B. IGMPv2 with snooping PIM-SSM C. IGMPv3 with snooping PIM-SSM D. IGMPv3 with snooping PIM-SM
Answer: C
S
uc c
es s
7.Two (2) Dell EMC Networking OS10 switches in a VLT configuration need to be upgraded. How will the reload of these switches proceed to result in the default initial state? A. Reload the primary VLT node. This process will automatically trigger the reload of the secondary node after it has completely recovered. B. Reload the primary VLT node and wait for it to join as secondary. Wait until after delay restore timer has expired. Reload VLT secondary node and wait for it to join as secondary. C. Reload the primary VLT node.This will automatically trigger the simultaneous reload of the secondary node. D. Reload the primary VLT node and wait for it to join as primary. Wait until after delay restore timer has expired. Reload VLT secondary node and wait for it to join as secondary. Answer: B
U
pd at
ed
D
-P
D
C
-D
Y
-2 3
E
xa m
Q
ue s
ti on
s
-Y ou
r
P
re pa ra
ti
on
S
ol ut
io n
to
A ch
ie
ve
8.Refer to the exhibit.
The output shown is from which command? A. S3(config-router-ospf-1)# show ip ospf database B. S3(config-router-ospf-1)# show ip ospf topology C. S3(config-router-ospf-1)# show ip ospf lsa D. S3(config-router-ospf-1)# show ip ospf statistics Answer: A
9.What is an advantage of running LLDP? A. Automatic error detection and correction of the port B. Reduces spanning-tree convergence
C. Provides detailed software version information D. Simplifies the use of network management Answer: D
10.What is the default PIM-SSM IP range? A. 224.0.0.0/4 B. 224.0.0.0/24 C. 232.0.0.0/8 D. 232.0.0.0/4 Answer: C
re pa ra
ti
on
S
ol ut
io n
to
A ch
ie
ve
S
uc c
es s
11.Refer to the exhibit:
-2 3
E
xa m
Q
ue s
ti on
s
-Y ou
r
P
What happens when a network administrator enters the shutdown command? A. Terminates established BGP sessions for the specified ASN (64567). B. Maintains existing BGP sessions but no longer establishes new ones. C. Stops any traffic from being sent on the physical interface that is used to reach neighbor 192.168.200.1. D. Terminates any established BGP sessions for the specified neighbor. Answer: D
U
pd at
ed
D
-P
D
C
-D
Y
12.How are ACLs processed? A. LIFO B. FIFO C. Randomly D. Sequentially Answer: D
Powered by TCPDF (www.tcpdf.org)
Updated D-PDC-DY-23 Exam Questions - Your Preparation Solution to Achieve Success
DELL EMC D-PDC-DY-23 Practice Questions Dell PowerSwitch Data Center Deploy 2023 Order our D-PDC-DY-23 Practice Questions Today and Get Ready to Pass ...
