Macard N300 WiFi Extender Setup Guide

MACARD N300 WIFI EXTENDER SETUP GUIDE https://gomacard.online/

INTRODUCTION The Macard N300 WiFi Extender is designed to eliminate dead zones and enhance your home or office wireless coverage by repeating your existing router's signal.

WPS METHOD SETUP - STEP-BYSTEP Step 1: Plug in the Macard extender near your router. (Wait for power LED to turn solid blue.) Step 2: Press the WPS button on the router. Then press WPS on the extender within 1 minute.

WPS METHOD CONTINUED Step 3: Wait for the extender’s WPS LED to turn solid blue. (Indicates successful connection.) Step 4: Unplug the extender and place it within the router’s range.

MANUAL METHOD SETUP STEP-BY-STEP Step 1: Plug in the extender and power it on. Connect your PC/laptop to the extender’s WiFi. Step 2: Open a browser and enter: IP: 192.168.10.1 OR URL: go.macard.online

MANUAL METHOD CONTINUED Step 3: Login using the password provided (usually “admin”). Step 4: Select the WiFi network you want to extend. Step 5: Enter WiFi username and password > Click SAVE

FINAL MANUAL SETUP STEP Wait until Internet LED turns solid blue. You can now unplug and relocate the extender midway between router and weak signal area.

CONCLUSION Follow correct setup steps (WPS or Manual). Troubleshoot using reconfiguration and reset if issues occur. Visit https://gomacard.online for more help.

THANK YOU