Description The LCIFP8 modular dual loop card for the IFP8 fire alarm control panel. Capable of controlling up to 484 devices(242 devices per loop). Compatible with the complete range of GST intelligent detectors, call points, sounders and interfaces, including gas extinguishing controllers and intrinsically safe devices
Features and Benefits
Loop Card LCIFP8
Up to 242 address per loop and definition of devices Up to 1.2Km Class A loop or Class B radial Optional loop expander up to 1Km Class B (P-9903) Built-In loop isolator Addressable Card Switch key interface module Reset bottom Built-in watch dog circuit Plug –in type easy to install
Description The P-9935 RS-232 Communication card is designed for the GST-IFP8 Panel for downloading software and GMC interfacing. The card has an optional interface program for BMS (P-9930MB), Printer , Pager and Voice Alarm system (P-9935EVAC).
Features and Benefits
Communication Card P-9935
Global System Technology PLC www.gst.uk.com
Switch, to set Card Code B: Indicator C: USB port D: RS232 port E: Connector: F: Jumpers, to set the working mode
DATA SHEET Note: Specifications are subject to change without notice.
Description The P-9945A RS 485 Network communication card is designed for the GST-IFP8 panel to be connected in a network of up to 64 GST intelligent control panels. The P-9945A can be wired as Class A or Class B connections with a maximum distance of 1.2Km between two panels
Features and Benefits
Built-In loop isolator Addressable Card Switch key interface module Reset bottom Built-in watch dog circuit Plug-in type, easy to install
Network Communication Card P-9945A
Description The P-9946 Repeater Card is designed for the GSTIFP8 panel for the connection between the panel and the repeater or mimic panel. A similar card to P-9935 but has a repeater processor with jumper setting to RS485.
Features and Benefits
Repeater Card P-9946
Global System Technology PLC www.gst.uk.com
Compatible for GST852RP and GST8903 Can connect up to 64 repeater panel, 1000meters cable length Built-In isolator Addressable Card Switch key interface module Reset bottom Built-in watch dog circuit Plug –in type easy to install
DATA SHEET Note: Specifications are subject to change without notice.
Description The P-9904 USB Printer Interface Card is designed for the GSTIFP8 panel for the connection between the panel and the commercial printer, the recommended printer model is Epson LQ300+II (GST do not supply printer)
USB Printer Interface Card P-9904 IFP8 Cards Technical Specification Baud Rate: Type of Protocol: Communication protocol: Card Operating Voltage: Card Operating Current: Operating Current: Temperature: Relative humidity:
Ordering Information Part Number: LCIFP8 Description: Loop Card Pack Qty. per Box: 1
Part Number: P9935/ P-9935-EVAX / P-9935-MB
RS Download Card Description:
232
Communication
/
Pack Qty. per Box: 1
Selection of Compatible Control Panel
Part Number: P9945A Description: Network Communication Card
Compatible with the GSTIFP8 Control Panel.
Class A or B Wring Pack Qty. per Box: 1
Part Number: P9946 Description: Repeater Card Pack Qty. per Box: 1
Part Number: P9904 Description: USB Printer Interface Card Pack Qty. per Box: 1 MANUFACTURED IN ACCORDANCE WITH
Global System Technology PLC www.gst.uk.com
DATA SHEET Note: Specifications are subject to change without notice.
Loop Card Communication Card - Agni Fire Alarm
Description The LCIFP8 modular dual loop card for the IFP8 fire alarm control panel. Capable of controlling up to 484 devices(242 devices per loop). C...