TVS Dealer in pune
Contact US
25 years of experiece The Shelar TVS is an authorized dealer of India’s trusted brand TVS. The shelar automotive is india’s No.1 dealer of TVS motor company.. The Shelar TVS is serving Punekar’s since 1998, to fulfill Punekar’s expectations with wide range of genuine products and trustworthy quality services. The Shelar TVS doesn’t only offers- bestselling scooters, gearless bikes but also it is a trusted service provider. The Shelar TVS has the multiple showrooms located in Araneshwar, Kothrud, Swargate, Balaji Nagar, Sinhgad Road, Paud Road, Kondhwa and Kharadi in Pune.
25+
Year Experience
5000+
bike Models
How to Change Your Motorcycle's Clutch and Brake Cable You can do regular work, timely repairs, spare parts and more on your motorcycle. You won't find a garage or mechanic nearby. You must be able to heal yourself at this time. There are some fixes you can't make unless your red fat. However, minor repairs such as collision repair can be easily done. When the perforations are numerous, there will be no holes to mistake. There are other items that can wear or break for various reasons. In such malfunctions, the clutch and brake cable are two of the most frequently broken parts. In this article, we will talk about how to replace your clutch and brake cables in case they wear out while driving. It is rare for the clutch or brake cable to break if you change it from time to time. But like life, most things are uncertain, and if you find yourself in a situation where you need to change them, this guide will help you. Even if you don't have one, you can help a friend who has a brake or clutch cable stuck. It happens on long journeys. Regular use of the brakes and engagement of the clutch can cause brake wear. At that time, you will find yourself on the highway. So, bring a spare set of clutch and brake cables when you go on a long road trip.
Be sure to purchase original cables sold or recommended by the motorcycle manufacturer. Using cheap or third-party wiring harnesses may cause malfunctions and their use may also damage other parts of your motorcycle in the long run. Plus, the cables are actually long and come with all the springs and nuts needed for proper installation. Besides the cable, you only need a wrench or pliers to loosen the nuts. Some oil can also be used but is not necessary. Some effects. You don't want them to break again due to wrong settings 1. Check wear/break points 2. Loosen the nut attaching the cable to the brake. The location of these nuts will differ between motorcycles with drum brakes and motorcycles with disc brakes. Please check the nut carefully before loosening it. Once the nut is loose, you need to pull the cable from the connector. If there is resistance, it will be caused by the metal plates welded to the cable. This is called a joint and acts as a hook or anchor for the braking unit. When the brake is stopped, it works like your finger pulling the trigger and pressing the brake. Remove the nipple by carefully pulling it through the groove provided. The control rod end can be removed when the brake end of the cable is removed. The brake lever has an adjuster to adjust the tension of the cable.
Loosen the cable to minimum resistance. Once the cable is loose, align the groove of the nut with the groove of the lever and carefully pull the cable out. Just like the brake end of the cable, the arm end has a connector and a hole in the arm where the connector is located. Find the hole and pull the nipple out. Both ends of the cable are now disconnected. Now don't pull it all the way. Carefully mark the path to install the cable from the power supply to the brake. New cables must be routed in the same way so as not to interfere with other parts of the motorcycle. Once you determine the path, gently pull the cable out. Do not pull too fast or you may damage other parts. . If your new phone does not have a spring, keep the old cable and use it with the new cable. Now check the power and stop end of the new phone and push the connector into the groove to connect the power end of the cable.
Once the end arm is properly positioned, thread the cable all the way through. Insert the brake end of the connector into the brake groove and tighten the nut. Adjust the cable tension to obtain the required tension for braking. Test it by driving slowly and controlling the speed. If everything is okay, you can continue walking. If you're a Dyer, you'll appreciate the process and the feeling of accomplishment once you've completed it. First, try these steps on your motorcycle; This way, if the cables break while driving, you will be better prepared to perform this procedure or to help other drivers in a similar situation. For more Information Visit our Shelar TVS Showroom in Pune. We are TVS Dealer in pune
Get in touch! For inquiries or assistance, reach out to The Shelar TVS through various channels. Visit our official website to find contact details, explore online directories, or engage with us on social media platforms Facebook and Instagram. If you prefer direct communication, consider contacting our customer service or visiting their physical location. The Shelar TVS is dedicated to addressing your needs and providing support for any queries you may have. The Shelar TVS is No 1 TVS Dealer in Pune
Phone
02071968673
Address
Araneshwar corner satara road pune
