T:+86-755 2909-1601/1602/1603
Phone +86-18923412995
Email Us:
[email protected]
Blog
Your best partner of MCPCB, Ceramic PCB, PCB & PCBA in Asia!
About
Product
Ceramic PCB
−General information −Ceramic Substrate −Thick Film Ceramic PCB −Thin Film Ceramic PCB −DCB Ceramic PCB −Why Are There Yellowing Areas on DBC/DCB Substrate?
Product Photos
Manufacturing
Quality
Design Guide
Order Online
FAQ
Contact
Product > Ceramic PCB > Thick Film Ceramic PCB
The "Thick Film" refers to the thickness of conductor layer on Ceramic PCB. Normally the thickness will be at least exceeds 10 miron (um), around 10~13um,
less than DCB Ceramic board or FR4 board. At the same time, using thick film technology, we can put resistor, electric capacity, conductor, semi-conductor, and interchangable conductor on ceramic board, after manufacturing steps of printing and high temperature sintering. We can make all the resistors with the same value, or different value for different resistor on the same
−High Power LED
−Solar Battery
☁ Skype Online
Nancy
PCB
Marina
Bella Choi
CERAMIC PCB Coco
Basic Parameter of Thick Film Ceramic Board Peter
Substrate can be 96% or 98% Alumina (Al2O3) or Beryllium Oxide (BeO),
1.0mm. Thicker thickness such as 1.6mm or 2.0mm can be customized too. Conductor layer materail is silver palladium, gold palladium, or Mo/Mu+Ni (for Ozone);
Online Service
Kali
Tiffany Choi
thickness range: 0.25, 0.38, 0.50mm, 0.635mm (default thickness), 0.76mm, −Radiofrequency (RF)
MCPCB
board.
−Test Report of Yellowing Ceramic PCB Substrate DCB Application
Online Service
more thick than spurting technology in Thin Film Ceramic PCB. Of course thickness is
Thickness of conductor >= 10 miron (um), and Max can be 20 micron (0.02mm) Min trace width and space for volume production:0.30mm & 0.30mm, 0.20mm/0.20mm is also okay but cost will be higher, and 0.15mm/0.20mm only available for prototype. Tolerance for final trace layout will be +/-10% Both gold and silver palladium is workable for gold-wire bonding, but customer need to mention that so that we will use special silver palladium which is suitable for that artwork. Gold palladium is much more expensive than silver, about 10~20 times higher More different resistor value on the same board, more expensive board will be Normally layers are 1L and 2L (with plated through hole (PTH), and plated material is the same like the one used for conductor), and maximum layers can be 10 layers Only board with Rectrangle shape can be shipped via single piece, or via panel Soldermask is also available upon request, working temperature >500 C, and color is semi-transparent For same stack up, cost lower than DCB, higher than MCPCB
Application of Thick Film Ceramic PCB High-power LED Chip, Wafter Street light, High bright light Automotive light system Hybrid integrated circuit for automotive Fuel Sendor Resistor Card Injection System Anti-block Braking system High-power electronic semi-conductor module electric power transmitter modules Semiconductor process equipment Solar cell
Skype
Sensor Telecome device
Please click here for immediate quotation online Quote Now Please contact us today for more information about Thick Film Ceramic circuit board.
About bestpcbs® Best Technology is the professional manufacturer of Metal Core PCB, ceramic PCB, FR4 PCB esp heavy copper PCB, 0.15-0.30mm extra thin PCB, Rigid-flex and PCBA (SMT), full turn-key service in China, with more than 11 years of experience, always reply within 12 hours, with best service at good price.
Contact information
Email Us:
[email protected]
Useful Sources:
Best Technology Co, Limited
T: +86-755 2909-
FPC: BestFpc.com
Add: 9E, Jindacheng Bld, Center Rd Shajing Town,Bao'an District Shenzhen, 518104, China
1601/1602/1603 Phone +86-18923412995 Fax:+86-755-89492899
Online Service
MCPCB
Kali
Metal Dome: metaldomes.com Snap Dome: metaldome.biz
Nancy
PCB
Marina Tiffany Choi
Copyright © Best Technology Co., Ltd
Bella Choi
CERAMIC PCB Coco Peter
Skype