Describing the Advantages of Using Aluminum Mold
We accept that aluminium is not the best metal for plastic injection molding, but still, few of its characteristics make it a reliable and cost-effective metal. Do you know that a few years ago, aluminium was not usually used by the mold makers because it wasn't considered to be a susceptible metal to bear the heat and pressure? But after a few years, it was found that aluminium mold for plastic injection is beneficial in many ways and today, it is widely used by the manufacturers in the process of plastic injection molding because it provides the following benefits.
One of the most important advantages of using the aluminium mold for plastic injection is that the cost of the aluminium mold is comparatively lower than of the steel mold and therefore it is preferred by many manufacturers because it lowers the overall manufacturing cost. The weight of the aluminium is also a big advantage which is lighter than steel. It is beneficial because, on several occasions, you may be required to produce such parts which should be light weighted. So, this characteristic could also be a reason to opt for the aluminium mold for plastic injection. Apart from this, it is easy to handle the aluminium mold during the injection molding process and that is why it is now being chosen by many companies. Yes, it is true that aluminium is light weighted than compared to steel, but still, it provides enough strength to the final product and therefore you don't need to worry about the durability of the finished parts. Another advantage of using an aluminium mold for plastic injection is that the production rate through this process is faster than the rate of production done with the help of the steel mold. So, you can save your time as well as your money by using aluminium molds, and this will help you to develop your business much better. Still, there are a few drawbacks of the aluminium molds, and they are:
The lifespan of the aluminium mold is usually less than the steel mold and it is a major drawback. Is not easy to modify the aluminium molds and hence it is a big drawback. For more information visit us at http://www.china-casting.biz/aluminum-mold-plasticinjection.html Contact Us iMold USA LLC ADD: 2220 Hillcrest Street Orlando, FL 32803 Tel.: +1-407-9822797 Email:
[email protected]
