CuproBraze CuproBraze is a copper-alloy heat exchanger technology for harsh temperature and pressure environments such as those in the latest generations of cleaner diesel engines mandated by global environmental regulations.[1][2] The technology, developed by the International Copper Association (ICA), is licensed free of charge to heat exchanger manufacturers around the world. Applications for CuproBraze include charge air coolers, radiators, oil coolers, climate control systems, and heat transfer cores.[3][2] CuproBraze is particularly suited for charge air coolers and radiators in capital intensive industries where machinery must operate for long periods of time under harsh conditions without premature failures. For these reasons, CuproBraze is being specified for off-road vehicles, trucks, buses, industrial engines, generators, locomotives, and military equipment. The technology is also amenable for light trucks, SUVs and passenger cars with special needs.[4][3][5] CuproBraze is replacing soldered copper/brass plate fin, soldered copper brass serpentine fin, and brazed aluminium serpentine fin in demanding applications.[2] Aluminium heat exchangers are viable and economical for cars, light trucks, and other light-duty applications. However, they are not amenable for environments characterized by high operating temperatures, humidity, vibration, salty corrosive air, and air pollution. In these environments, the additional tensile strength, durability, and corrosion resistance that CuproBraze provides are useful.[2] The CuproBraze technology uses brazing instead of soldering to join copper and brass radiator components. The heat exchangers are made with anneal-resistant copper and brass alloys. The tubes are fabricated from brass strip and coated with a brazing filler material in form of a powder based paste or an amorphous brazing foil is laid between the tube and fin. There is another method of coating the tube in-line on the tube mill. This is done using the twin wirearc spray process where the wire is the braze alloy, deposited on the tube as it is being manufactured at 200-400 fpm. This saves one process step of coating the tube later. The coated tubes, along with copper fins, headers and side supports made of brass, are fitted together into a core assembly which is brazed in a furnace.[6] The technology enables brazed serpentine fins to be used in copper-brass heat exchanger designs. They are stronger, lighter, more durable, and have tougher joints.[2]
Contents Performance benefits Thermal performance Heat transfer efficiency Size Strength and durability Emissions Corrosion resistance Repairability Antimicrobial OEMs and end users See also Further reading References
Performance benefits CuproBraze radiators have important performance advantages over radiators made with other materials. These include better thermal performance, heat transfer, size, strength, durability, emissions, corrosion resistance, repairability, and antimicrobial benefits. Property
Unit
Cu fin
Brass tube
Al fin
Al tube
Stainless Steel
Density
g/cm3
8.95
8.53
2.75
2.75
7.8 – 8
Thermal conductivity
W/m °C
377
(120)
222
(160)
3 – 24
Tensile strength, room Temp
MPa
330
435
40
145
> 485
Tensile strength, 260 °C
MPa
270
290
31
69
> 475
Thermal expansion
µm/m °C
16.5
19.9
23.6
23.6
11 – 19
Specific heat
J/kg °K
377
377
963
963
500
Melting temperature
°C
1083
915
643
643
> 1400
Safety margin in brazing (against core melting)
°C
300
300
30
30
350
Thermal performance The ability to withstand elevated temperatures is essential in high-heat applications. Aluminium alloys are challenged at higher temperatures due to their lower melting points. The yield strength of aluminium is compromised above 200 °C. Problems with fatigue cracking are exacerbated at elevated temperatures.[5][7][8] CuproBraze heat exchangers are capable of operating at temperatures of 290 °C and above. Special anneal-resistant copper and brass strip ensure that radiator cores maintain their strength without softening, despite exposures to high brazing temperatures.[3]
Heat transfer efficiency Cooling efficiency is a measure of heat rejection from a given space by a heat exchanger.[9] The overall thermal efficiency of a heat exchanger core depends on many factors, such as thermal conductivity of fins and tubes; strength and weight of the fins and tubes; spacing, size, thickness and shape of fins and tubes; velocity of the air passing through the core; and other factors.[5][9] The main performance criterion for heat exchangers is cooling efficiency. Heat exchanger cores made from copper and brass can reject more heat per unit volume than any other material. This is why copper-brass heat exchangers generally have a greater cooling efficiency than alternate materials. Brazed copper-brass heat exchangers are also more rugged than soldered copper-brass and alternate materials, including brazed aluminium serpentine.[2] Air pressure drop is a good evaluator of heat exchanger design. A heat exchanger core with a smaller air pressure drop from the front to the back of the core (i.e. from the windward to the leeward side in a wind tunnel test) is more efficient. Air pressure drops typically are 24% less for CuproBraze versus aluminium heat exchangers. This advantage, responsible for a 6% increase in heat rejection, contributes to CuproBraze’s overall greater efficiency.[10][11] Since copper’s thermal conductivity is higher than aluminium’s, copper has a higher capacity to dissipate heat. By using thinner material gauges in combination with higher fin density, heat dissipation capacity with CuproBraze can be increased with air pressure drops still at reasonable levels.[4]
Size Due to its high heat transfer efficiency, CuproBraze offers a significant amount of cooling capacity in a small size. This is because the same heat rejection level can be achieved with a smaller-sized core. Hence, a significant reduction in frontal area and volume is achievable with CuproBraze versus other materials.[3][5]
Strength and durability Three new alloys were developed to enhance the strength and durability of CuproBraze heat exchangers: 1) an anneal-resistant fin material that maintains its strength after brazing; 2) an anneal-resistant tube alloy that retains its fine grain structure after brazing and provides ductility and fatigue strength in the brazed heat exchanger core; and 3) the brazing alloy.[12] Brazing at 650 °C creates a joint that is stronger than a soldered joint and comparable in strength to a welded joint.[13] Unlike welding, brazing does not melt the base metals. Therefore, brazing is more amenable to joining dissimilar alloys.[3] CuproBraze has more strength at elevated temperatures than soldered copper-brass or aluminium. Due to the lower thermal expansion of copper versus aluminium, there is less thermal stress during the manufacturing of CuproBraze and in its use as a heat exchanger. CuproBraze heat exchangers have stronger tube-to-header joints than other materials. These braze joints are the most critical in heat exchangers and must be leak-free. CuproBraze also has higher tolerances to internal pressures because its thin-gauge high strength materials provide stronger support for the tubes. The material is also less sensitive to bad coolants than aluminium heat exchangers.[14][12] Test results demonstrate a much longer fatigue life for CuproBraze joints compared to similar soldered copper-brass or brazed aluminium joints.[15] Stronger joints allow for the use of thinner fins and new radiator and cooler designs.[16][5] The copper fins are not easily bent when dirty radiators are washed with high pressure water. Anticorrosive coatings further improve strength and resistance against humidity, sand erosion, and stone impingement on copper fins. For further information, see: CuproBraze: Durability and reliability (Technology Series): [12] and CupropBraze durability (design criteria series).[15]
Emissions New legislation in Europe, Japan and the U.S. call for strong reductions in NOX and particulate emissions from diesel engines used in trucks, buses, power plants, and other heavy equipment.[17] These goals can in part be accomplished by using cleaner-performing turbocharged diesel engines and charge air coolers. Turbocharging enables better power outputs. Charge air coolers allow power to be produced with more efficiency by reducing the temperature of the air charge entering the engine, thereby increasing its density.[18] The charge air cooler, located between the turbocharger and the engine air inlet manifold, is an air-to-air heat exchanger.[3] It reduces the inlet air temperatures of turbocharged diesel engines from 200 °C to 45 °C while increasing inlet air densities to increase engine efficiencies. Even higher inlet temperatures (246 °C or higher) and boost pressures may be necessary to comply with the emissions standards in the future.[17][11] Present-day charge air cooler systems, based on aluminium alloys, experience durability problems at temperatures and pressures necessary to meet the U.S. Tier 4i standards for stationary and mobile engines.[19][2][4][20] Published reports estimate that the average life of an aluminium charge air cooler is currently only about 3,500 hours.[21] Aluminium is near its upper technological limit to accommodate higher temperatures and thermal stress levels[17] because the tensile strength of the metal declines rapidly at 150 °C and repetitive thermal cycling between 150 °C and 200 °C substantially weakens it. Thermal cycling creates weak spots in aluminium tubes, which in turn causes charge air coolers to fail prematurely. A potential option is to install stainless steel precoolers in aluminium charge air coolers, but limited space and the complexity of this solution is a hampering factor for this option.[11] A CuproBraze charge air cooler can operate at temperatures as high as 290 °C without creep, fatigue, or other metallurgical problems.[11][22]
Corrosion resistance Exterior corrosion resistance in a heat exchanger is especially important in coastal areas, humid areas, polluted areas, and in mining operations. Corrosion mechanisms of copper and aluminium alloys are different. CuproBraze tube contains 85% copper which provides high resistance against dezincification and stress corrosion cracking. The copper alloys tend to corrode uniformly over entire surfaces at known rates. This predictability of copper corrosion is important for proper maintenance management.[2][23] Aluminium, on the other hand, is more likely to corrode locally by pitting, resulting eventually in holes.[23] In accelerated corrosion tests, such as SWAAT for salt spray and marine conditions, CuproBraze performed better than aluminium.[2] The corrosion resistance of CuproBraze is generally better than soft soldered heat exchangers. This is because the materials in CuproBraze heat exchangers are of equal nobility, so galvanic differences are minimized. On soft soldered heat exchangers, the solder is less noble than fin and tube materials and can suffer from galvanic attack in corrosive environments.[23]
Repairability CuproBraze can be easily repaired. This advantage of the technology is especially important in remote areas where spare parts may be limited. CuproBraze can be repaired with lead-free soft solder (for example 97% tin, 3% copper) or with common silver-containing brazing alloys.
Antimicrobial Biofouling is often a problem in HVAC systems that operate in warm, dark, and humid environments. The antimicrobial properties of CuproBraze alloys eliminate foul odors, thereby improving indoor air quality. CuproBraze is being investigated in mobile air conditioner units as a solution to bad odors from fungus and bacteria in aluminium-based heat exchange systems.[24][25]
OEMs and end users Russian OEMs, such as Kamaz and Ural Automotive Plant, are using CuproBraze radiators and charge air coolers in heavy-duty trucks for off-highway and on-highway applications. Other manufacturers include UAZ and GAZ (Russia) and MAZ (Belarus). The Finnish Radiator Manufacturing Company, also known as FinnRadiator,[26] produces 95% of its radiators and charge air-coolers with CuproBraze for OEM manufacturers of off-road construction equipment. Nakamura Jico Co., Ltd. (Japan) manufactures CuproBraze heat exchangers for construction equipment, locomotives and on-highway trucks. Young Touchstone supplies CuproBraze radiators to MotivePower’s dieselpowered commuter train locomotives in North America. Siemens AG Transportation Systems plans to use the technology for its Asia Runner locomotive for South Vietnam and other Asian markets. Bombardier Transportation heat exchangers cool transformer oil in electric-powered locomotives. These huge oil coolers have been used successfully in coal trains for South African Railways. Kohler Power Systems Americas, one of the largest users of diesel engines for power generation, adopted CuproBraze for diesel engine turbocharger air-to-air cooling in its “gen sets.”[19]
See also Copper in heat exchangers
Further reading Palmqvist U., Liljedahl M. and Falkenö A., 2007. Copper and its Properties for HVAC Systems; Society of Automotive Engineers (SAE) Technical Paper Series 2007-01-1385; http://store.sae.org/ Falkenö A., 2006. Environmentally Driven Development of New Heat Exchanger Materials, SAE Technical Paper Series 2006-01-0727; http://store.sae.org/ Falkenö A., Tapper L., Ainali M. and Gustafsson B., 2003. The Influence of the Brazing Parameters on the Quality of the Heat-Exchanger Made by the CuproBraze Process, SAE Technical Paper Series 2003-040037; http://store.sae.org/ Tapper L, Ainali M., 2001. Interactions between the materials in the 632 tube-fin-joints in brazed copper–brass heat exchangers, SAE 633; 2001-01-1726. 634 Ainali M., Korpinen T. and Forsén O., 2001. External Corrosion Resistance of CuproBraze Radiators; SAE Technical Paper Series 2001-01-1718; http://store.sae.org/ Korpinen T., Electrochemical Tests with Copper/Brass Radiator Tube Materials in Coolants, 2001. SAE Technical Paper Series 2001-01-1754; http://store.sae.org/ Gustafsson B. and Scheel J. 2000. CuproBraze Mobile Heat Exchanger Technology; SAE Technical Paper Series 2000-01-3456; http://store.sae.org/
References 1. Vehicle radiators: Can CuproBraze turn copper into a bona fide contender?; American Metal Market September 2008; http://dl.dropbox.com/u/46572847/Perspectives-radiators.pdf 2. Partanen, Juho (2011). Hot property: Heat exchangers that optimize product reliability, decrease lifecycle costs and improve profitability are just the ticket for increasing the lifespan and performance of offhighway machinery; Industrial Vehicle Technology; March 2011; http://viewer.zmags.com/services/DownloadPDF 3. Duensing, Lauren (2006) Develop efficient heat-transfer systems, Modern Metals, March 2006. http://www.cuprobraze.com/pdf/inthenews_moder-metals.pdf 4. Asia Hot on New Cooling Technology: Cooling Systems: New engine requirements mean manufacturers are changing to copper and brass for cooling systems; Automotive Engineering International, February 2005 5. CuproBraze®: Advanced heat-exchanger technology http://www.cuprobraze.com/pdf/CuproBrazeBrochure.pdf 6. Cuprobraze overview: "Archived copy" (https://archive.is/20130215191212/http://www.cuprobraze.com/over_tech.asp). Archived from the original (http://www.cuprobraze.com/over_tech.asp) on 2013-02-15. Retrieved 2012-11-26. 7. Elevated temperature operation - Meeting the high temperature challenges of new generations of charge intercoolers (design criteria series): http://www.cuprobraze.com/pdf/temperature.pdf 8. CuproBraze: Thermal performance (Technology Series): http://www.cuprobraze.com/documents/2Thermalperformance.pdf 9. CuproBraze Efficiency (Design Criteria Series): http://www.cuprobraze.com/pdf/Efficiency.pdf 10. CuproBraze: Size - When the advantage in efficiency is equivalent to a smaller-sized core (design criteria series): http://www.cuprobraze.com/pdf/Size.pdf 11. CuproBraze®: Efficient, durable, sustainable, CuproBraze heat exchanger (brochure): http://www.cuprobraze.com/documents/EfficientdurablesustainableCuproBrazeheatexchanger.pdf 12. CuproBraze: Durability and reliability (Technology Series); http://www.cuprobraze.com/documents/3Durabilityandreliability.pdf 13. Jean M. Hoffman, Runnin' light and cool, Machine-Design.com; March 3, 2005, http://machinedesign.com/article/runnin-light-and-cool-0303 14. Finnradiator; http://www.finnradiator.com/solutions-and-technology/the-right-solution-for-you/advantages-of-the-cuprobraze-technology/excellent-durability-even-in-the-most-demanding-conditions/ 15. CuproBraze Durability (design criteria series): http://www.cuprobraze.com/pdf/Durability.pdf 16. Coming Toward CuproBraze: Brazed copper brass technology beginning to flourish across a growing range of heat transfer applications, Nigel Cotton, Diesel Progress, North American Edition, Diesel & Gas Turbine Publications, August 2008; Diesel Progress, August 2008 17. Bo Svensson, 2006. Cool technology to help meet emissions targets: Diesel Progress International Edition; July–August 2006, http://www.cuprobraze.com/pdf/inthenews_diesel.pdf 18. Heat exchangers: Meeting the challenges of the future: Trucks and buses; CuproBrazeAlliance; http://www.cuprobraze.com/pdf/trucks.pdf 19. Brazed Copper-Brass Technology Flourishes in Diverse Applications; Automotive Exports; September 2009; Page 26-30 20. Nonroad diesel engines; Emission control for stationary and mobile engines; DieselNet; http://www.dieselnet.com/standards/us/nonroad.php 21. Heat Exchangers: Meeting the challenges of the future; Market Update Series; CuproBraze Alliance; 2004; http://www.cuprobraze.com/pdf/engine.pdf 22. CuproBraze: Emissions standard (Technology Series); http://www.cuprobraze.com/documents/1Emissionstandards.pdf 23. FAQs about CuproBraze; "Archived copy" (https://archive.is/20130215191630/http://www.cuprobraze.com/FAQ.asp). Archived from the original (http://www.cuprobraze.com/FAQ.asp) on 2013-02-15. Retrieved 2012-11-26. 24. Brazed copper-brass reduces odors from mobile air conditioners, Automotive Engineering International Online, 05-Dec-2008; http://www.sae.org/mags/aei/5442 25. Back to the future with copper brazing; Machine Design.com; December 11, 2008; http://machinedesign.com/article/back-to-the-future-with-copper-brazing-1211 26. FinnRadiator; http://www.finnradiator.com Retrieved from "https://en.wikipedia.org/w/index.php?title=CuproBraze&oldid=797975163"
This page was last edited on 30 August 2017, at 07:41. Text is available under the Creative Commons Attribution-ShareAlike License; additional terms may apply. By using this site, you agree to the Terms of Use and Privacy Policy. Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc., a non-profit organization.
