Art of Professional Wallpaper Installation

ART OF PROFESSIONAL WALLPAPER INSTALLATION 5 STEPS TO WALLPAPER INSTALLATION 1. GATHER YOUR MATERIALS

Wallpaper Wallpaper adhesive or paste Smoothing brush or wallpaper smoother Wallpaper roller

Ensure the walls are clean, smooth, and free of any dust or debris. Fill any holes or cracks and sand them down for a seamless surface.

3.MEASURE AND CUT THE WALLPAPER

Measure the height of the wall and add a few inches to allow for trimming. Roll out the wallpaper on a clean, flat surface and measure and cut each strip according to your measurements, making sure to match the pattern if applicable.

Starting from one corner of the room, carefully position the first strip of wallpaper against the wall, leaving a few inches of excess at the top and bottom.

5. TRIM AND MATCH SEAMS

2. PREPARE THE WALLS

4. HANG THE WALLPAPER

Once the first strip is in place, use a utility knife to trim off the excess at the top and bottom, using a straight edge as a guide.

WWW.DECOANDCO.COM.AU