6 THINGS TO CHECK ON A SCRUBBER DRYER
Check The Squeegees Scrubber dryers need to be maintained to get top-level performance. A scrubber dryer is segmented into different parts. Among all, first, you must check the squeezes. If possible, take the squeeze bar out of the machine. Next, clean the squeeze bar if it is not properly cleaned. Check the blade properly as on the top side it needs to be flat. If you identify any damage, consider an immediate replacement.
Check The Setup of The squeegee Once the squeeze bar is fixed, put it down and start the vacuum. Take the scrubber dryers Ireland forward to ensure that the squeeze is sitting on the floor properly or not. The vacuum must work properly to clean the things. Adjust the squeeze bar until you are getting an even kiss of blades on the floor. While operating the machines, always check the sitting on the floor.
Check The Squeegee Hose While checking the squeeze, check the pipe or hose that is connecting the squeeze bar with the tank. It collects the dirty water from the tank. Hence, often it gets dirty and blocked from inside. The blocked pipe will not be able to collect all the dirty water and hamper the performance of the scrubber. If you find any blockage, run warm water through it to clear it.
Check The Recovery Tank Filter A filled recovery tank hampers the cleaning process often. Hence, check the recovery tank and the filter. However, all the dryers don’t have filters. Usually, the filter is placed on outlet vacuum motors. You must ensure that the filter is clean before you start using it. However, if it is not, then remove it to clean.
Check The Solution Filter Most of the scrubbers have solution filters in them. Generally, it is placed under the machine within a bowl. Removing the filter will help you in draining the filter. Hence, take the scrubber outside before removing the filter. You can clean the filter with warm running water to clear the blockages in the scrubber dryers Ireland.
Check The Battery Levels It applies only to those machines which run on batteries. Before you start the cleaning, the process checks the battery level. If the battery is low, then put it on charging. It is better to give a full charge to the battery once a week. Besides, maintain the battery health too.
To know more visit : https://clenlidirect.com/
