@
RX 70-60
RX 70 Technical data Diesel forklift truck
RX 70-70 RX 70-80
RX 70 Technical data.
IC engine
Performance
Dimensions
Wheels | chassis
Weights
Characteristics
This specification sheet to VDI Guidelines 2198 only gives the technical figures for the standard truck. Different tyres, other masts, additional equipment etc. could give different figures.
Miscellaneous
2
1.1 1.2 1.2.1 1.3 1.4 1.5 1.6 1.8 1.9 2.1 2.2 2.2.1 2.3 2.3.1 3.1 3.2 3.3 3.5 3.5.1 3.6 3.7 4.1 4.1.1 4.2 4.3 4.4 4.5 4.7 4.8 4.12 4.19 4.20 4.21 4.22 4.22.1 4.22.2 4.23 4.24 4.31 4.32 4.33 4.34 4.35 4.36 5.1 5.1.1 5.2 5.2.1 5.3 5.3.1 5.5 5.5.1 5.5.2 5.7 5.7.1 5.9 5.9.1 5.10 7.1 7.1.1 7.2 7.3 7.4 7.4.1 7.5 7.10 8.1 10.1 10.2 10.4 10.7 10.7.1 10.8
2 3
Manufacturer Manufacturer’s model designation Manufactuer’s type designation Drive: electric, diesel, petrol, LPG, mains electric Operation: manual, pedestrian, stand-on, rider seated, order picker Rated capacity Load centre Load distance Wheel base Truck weight Axle load front, with load Axle load rear, with load Axle load front, without load Axle load rear, without load Tyres: solid rubber, Superelastic, pneumatic, Polyurethane Tyres size front Tyres size rear Number of wheels front (x = driven) Number of wheels rear (x = driven) Track width front Track width rear Tilt mast/fork carriage, forward Tilt mast/fork carriage, back Closed mast height Free lift Lift Extended mast height Height over overhead guard (cabin) Seat height/stand height rel. to SIP Coupling height Overall length Length including fork backs Overall width Fork thickness Fork width Fork length Fork carriage DIN 15173, class/form A, B Fork carriage width Ground clearance beneath mast, with load Ground clearance centre wheel base Aisle width for pallets 1000 x 1200 wide Aisle width for pallets 800 x 1200 long Turning radius Inner turning radius Speed with load Speed without load Lift speed with load Lift speed without load Lowering speed with load Lowering speed without load Drawbar pull with load Max. drawbar pull with load Drawbar pull without load Gradeability with load Gradeability without load Acceleration time with load Acceleration time without load Service brake Engine manufacturer Type Engine performance in accordance with ISO 1585 Nominal speed No. of cylinders Displacement Fuel consumption in VDI cycle On-board voltage Drive type Hydraulic pressure for attachments Oil volume for attachments Volume fuel tank Sound pressure level LPAZ 2 (driver’s seat) Sound power level LWAZ (work cycle) Body vibrations 3 in accordance with EN 13059 Trailer coupling, type DIN
With cabin, higher levels without cabin. With standard driver’s seat.
Q c x y
kg mm mm mm kg kg kg kg kg
b10 b11
mm mm ° ° mm mm mm mm mm mm mm mm mm mm mm mm mm
h1 h2 h3 h4 h6 h7 h10 l1 l2 b1 s e l b3 m1 m2 Ast Ast Wa b13
mm mm mm mm mm mm mm km/h km/h m/s m/s m/s m/s N N N % % s s
kW 1/min cm³ l/h V bar l/min l dB (A) dB (A) m/s2
STILL GmbH RX 70-60 7341 Diesel Rider seated 6000 600 710 2285 10477 14854 1623 5415 5062 SE 355/65-15 28 x 9-15 2x 2 1306 1358 5 8 2710 150 3550 4440 2697 1719 510/660 4640 3440 1597 70 150 1200 Cl. IV, form A 1600 220 210 4907 5107 3007 877 20 20 0,51 0,51 0,56 0,52 31680 51090 31680 33 32 5,4 4,9 Electr./mech. Deutz TCD 4.1 80 2400 4 4038 7,0 12 Diesel-electric 260 60 110 75 97 0,31 Pin
STILL GmbH RX 70-70 7342 Diesel Rider seated 7000 600 720 2285 11370 16599 1771 5555 5815 SE 8.25-15 250-15 4x 2 1510 1358 5 8 2710 150 3150 4240 2697 1719 510/660 4732 3532 1998 70 150 1200 Cl. IV, form A 1800 220 210 4987 5187 3067 877 20 20 0,42 0,42 0,50 0,42 32540 46370 32540 27 30 5,5 5,0 Electr./mech. Deutz TCD 4.1 80 2400 4 4038 7,8 12 Diesel-electric 260 60 110 75 97 0,31 Pin
STILL GmbH RX 70-80 7343 Diesel Rider seated 8000 600 720 2405 12274 18396 1878 6006 6268 SE 8.25-15 250-15 4x 2 1510 1358 5 8 2710 150 3150 4240 2697 1719 510/660 4800 3600 1998 70 150 1200 Cl. IV, form A 1800 220 210 5056 5256 3136 894 20 20 0,42 0,42 0,50 0,42 35460 46300 35460 24 30 5,7 5,1 Electr./mech. Deutz TCD 4.1 80 2400 4 4038 8,6 12 Diesel-electric 260 60 110 75 97 0,31 Pin
3
h1
h7
h
6
h3
h8
h4
Seat adjustable ± 90
c
S
m1 m2
h2
h10
Q
l
x
y l2
Ast x
100
e
a
W
1:50 Dimensions relate to vertical mast.
b11 b10
b3 b1 Forks adjustable
1200
b13
100
(800) 1000
RX 70-70
RX 70-60
RX 70 Technical data.
RX 70-80
4
Rated lift Closed height Free lift Max. height Max. width Tyres front Tyres rear Track Track Rated lift Closed height Free lift Max. height Max. width Tyres front Tyres rear Track Track Rated lift Closed height Free lift Max. height Max. width Tyres front Tyres rear Track Track
h3 h1 h2 h4 B
mm mm mm mm mm
v h h3 h1 h2 h4 B
mm mm mm mm mm mm mm
v h h3 h1 h2 h4 B
mm mm mm mm mm mm mm
v h
mm mm
Telescopic mast 3550-6850 2710-4360 110 4440-7740 1599 SE 355/65-15
Triplex mast 4770-5820 2710-3010 1755-2055 5660-6710 1599 SE 355/65-15
6420-8670 3210-3960 2255-3005 7310-9560 1647 SE 355/50-20
1306
1364
SE 28 x 9-15 1306 1358 3150-6450 2710-4360 110 4240-7540
4705-8455 2710-3960 1555-2805 5795-9545 2003 SE twin 8.25-15 SE 250-15 1510 1358
3150-6450 2710-4360 110 4240-7540 2003 SE twin 8.25-15
4705-8455 2710-3960 1555-2805 5795-9545 2125 SE twin 315/70-15 SE 250-15 1510 1358
5
6000
Rated capacities RX 70-60 triplex mast– single SE tyres 7000
Load centre c = 600 mm Rated capacity (kg)
Rated capacity (kg)
Rated capacities RX 70-60 telescopic mast – single SE tyres 7000
c = 800 mm
5000 4000
c = 1000 mm c = 1200 mm
3000 3000
4000
5000
6000
6000
Load centre c = 600 mm c = 800 mm
5000 4000
c = 1000 mm c = 1200 mm
3000 4000
7000
5000
Lift height (mm)
5000
Load centre c = 600 mm
7000
c = 800 mm c = 1000 mm c = 1200 mm
4000
6000
4000
5000
6000
8000
9000
c = 1000 mm
5000
c = 1200 mm
5000
7000
Rated capacities RX 70-80 triplex mast– SE twin tyres 9000
Load centre c = 600 mm c = 800 mm
c = 1000 mm c = 1200 mm
4000 3000 3000
6000
Lift height (mm)
Rated capacity (kg)
Rated capacity (kg)
5000
9000
c = 800 mm
3000 4000
7000
Rated capacities RX 70-80 telescopic mast – SE twin tyres 9000
6000
8000
Load centre c = 600 mm
Lift height (mm)
7000
9000
4000
3000 3000
8000
8000
Rated capacities RX 70-70 triplex mast– SE twin tyres 8000
Rated capacity (kg)
Rated capacity (kg)
6000
7000
Lift height (mm)
Rated capacities RX 70-70 telescopic mast – SE twin tyres 8000 7000
6000
8000
Load centre c = 600 mm
7000
c = 800 mm
6000
c = 1000 mm
5000
c = 1200 mm
4000 4000
5000
6000
7000
Lift height (mm)
Different tyres, other masts, additional equipment etc. could give different figures.
3000 4000
5000
6000
7000
Lift height (mm)
6
RX 70 Technical data.
Overall concept: Four-wheel counter balance forklift truck with front wheel drive and internal combustion engine.
Drive. - Diesel-electric drive with hybrid technology. - Diesel engine directly connected to AC current generator. - Drive axle with capsulated rotary current drive motor for high torque moment at low motor speed, temperature independent. - Wear free, oil immersed lamella-type brake. - Compact design and extreme agility combined with sensitive drive and lift control for optimum work performance.
Ergonomics. - Large workspace for the driver with high comfort due to optimum arrangement of controls and individual adaptation of the cabin. - E xcellent visibility to all sides due to off-centre position of the cabin and high seat position.
Safety. - Low centre of gravity and free floating steering axle for maximum stability. - Outstanding driving stability when cornering – no need for electronic assistants. - High residual capacities also for large lift heights.
Economy. - Low operation costs due to low fuel costs in all work cycles and long maintenance intervals. - Optimum tuning of drive and hydraulic controls to maximum performance or best efficiency. - STILL ProActive – reduction of downtimes, fast fault finding, transfer of error codes to the STILL service centre.
Environment. - Lowest CO2 emission. - E ngines are far below the exhaust limit values required by EU nonroad directive 97/68/EG (2004/26/EG) EU level 3b/EPA Tier 4i.
Service. - Shortest maintenance interval 1000 hours of operation. - Fast fault identification in case of damage by computer assisted diagnostics. - Optimum service access thanks to large access holes at the sides.
Standard equipment: Drive. - Modern, maintenance friendly DEUTZ industrial engine. - E xhaust system with oxidizing catalyst and subsequent diesel particle filter with permanent regeneration.
Driver’s workspace. - Well visible, large access steps. - Handles on the overhead guard and on the engine cover. - Large footwell with vibration dampening floor mat and car-style pedals. - Modern driver’s seat with multiple adjustments with high suspension and dampening comfort. - Drive control by car-style single pedal control. - Operation of hydraulic functions with STILL mini levers. - Hydraulic power steering with small steering wheel, ergonomically located off-centre to the left. - Narrow, adjustable steering column without obstructing displays. - Central control and display unit in the field of vision of the driver. - Large storage compartments on the right side and in the rear of the driver’s compartment.
Blue-Q energy optimisation. - Activate Blue-Q energy saving mode at the push of a button. - Energy saving due to intelligent optimisation of the drive characteristics without impairing the work process. - Intelligently switches off electrical consumers - A saving in energy consumption of up to 10 % depending on the application and the truck’s equipment.
Parameters to control driving characteristics. - Acceleration and braking of the truck only with the drive pedal. - Five drive levels can be set by the driver. - Individual adjustment of speed, acceleration and braking for each drive level. - Intelligent drive control with reduction of engine speed after acceleration is completed.
Mast and hydraulics. - Wide mast opening; telescopic and triplex versions available. - Demand governed adjustable hydraulic displacement pump for lift and steering hydraulics. - Hydraulics and drive operate independently, therefore no inching function is needed.
Electrical system. - Modern CAN bus technology with integrated on-board diagnostics. - 12-Volt electric system.
7
Additional equipment and options*: Truck equipment. - Various Superelastic or pneumatic tyres. - Mud guard extensions to protect the load and the attachment from dirt. - Trailer couplings with various coupling heights.
Engine. - Additional air filter for operation in atmospheres with dust or fibres. - Adjustable engine switch-off. - Engine pre heating for operation in cold regions.
Cabin equipment. - Modular cabin design with wind screen for front, rear and roof, rear screen heater. - Doors hinged at the rear with large opening angles and two-way sliding windows. - Selection of water heater or integrated heater/air condition. - Parallel windscreen wipers with large field of vision for front and rear screen, with washer system by standard. - Roof screen wiper. - Unbreakable interior and exterior rear view mirrors. - Sun blind and sun visor. - Writing pad with paper clip (detachable). - Comfort seats with textile cover, air suspension, heating, lumbar support, extended backrest. - Swivel plate for seat to turn by 20° when reversing. - Horizontal suspension plate to minimise body vibrations. - Radio/MP3 player integrated in the interior lining of the overhead guard. - Restraint system with bar doors. - STILL EasyBelt – the intelligent ways to assist fastening the seat belt. - Protective roof grid.
Controls. - Drive control by twin pedals. - Joystick or Fingertipp controls for hydraulic functions.
*Standard or optional equipment.
Electric devices and drive control. - Speed limiter, setting as requested by driver. - Cruise control. - Car-style lighting system, approved for public road traffic. - Halogen or LED spot lights front and/or rear, mounted on the overhead guard, also available as twin lights to improve lighting of the area of work. - Hazard and signalling lights. - STILL Safety Light – blue dot of light on the travel path when reversing to warn pedestrians of the truck approaching. - Driver assistance: seat belt monitor, speed reduction for lifted loads and when cornering. - Components of the Material flow Management System (MMS). - FleetManager™ – access authorisation, analysis of truck data and accident recorder.
Mast and hydraulics. - Additional hydraulic functions to operate attachments. - Various fork carriage widths and fork lengths. - Attachments to suit the handled goods. - Buffer oil tank to dampen jerks from the hydraulics. - STILL load measuring system with integrated display and totalling function. - Automatic mast upright setting with progressive stop at end positions.
Special equipment. - Special equipment versions for operation in particularly difficult applications, e. g. in foundries or cold environmental temperatures.
@
STILL GmbH
STILL Materials Handling Ltd.
Berzeliusstraße 10
Aston Way, Leyland
D-22113 Hamburg
Lancashire PR26 7UX
Telephone: +49 (0)40/73 39-2000
Telephone: +44 (0)1772 644300
Telefax: +49 (0)40/73 39-2001
Telefax: +44 (0)1772 644303
[email protected]
[email protected]
For further information please visit:
For further information please visit:
www.still.de
www.still.co.uk
RX 70 60 80 EN 01/13 TD Subject to technical modifications.
Your contact
