VACANCIES WHAT ARE WE LOOKING FOR IN THE NETHERLANDS? Here is a selection of the vacancies in the Netherlands. You can find more vacancies on the EURES website: www.eures.europa.eu, and information on www.werk.nl/eures Language For all vacancies knowledge of English is required. If you don’t speak English: Don’t write. How to react. Send a CV and Cover letter by email to the contact. Your CV should be in English. Mention the vacancy number in your reaction. These vacancies are open to EU/EER nationals only. This list was compiled the 2th of October 2013. Content: Realization Designer Engineer 2 Engineer Aftertreatment Systems 2 Piping Engineer 3 (Senior) Systems Engineer 3 INDUSTRIAL MECHANIC 4 INDUSTRIAL ELECTRICIAN 4 Sales manager France 5 Experienced CNC turn/miller/grinder 5 EMEA Project Analyst, grade 1c 6 Welder 6 Experienced Inventory Controller 7 Process Engineer assess sensor 7 Design engineer high temp sensors 8 SENIOR PHP DEVELOPER 9 SOLUTION ARCHITECT MOBILE PLATFORMS 10 Flight Control Aerospace Engineer, Wind Energy 11 Experienced (5+yrs) 254SMO Welder 11 Maintenance Manager Extrusion 11 Mechatronics Engineer MSc or PhD 12 SENIOR PATENT ATTORNEY 13 Mec. CAD Eng electrowetting display 14 Hardware System Eng (4+yrs exp.) 14 SERVICE ENGINEER (MARITIEM) 15 Improvement Analyst 15 Draftsman 16 Allround mecanical engineer 17 CNC Programmer / Turner / Miller 17 Process Development Eng - Chemicals 17 Order Project Manager 18 1
Lead Mechanical Engineer 19 RESEARCH SCIENTIST EMBEDDED SYSTEM 20 Mechanical Engineer 21 Combustion Engineer Diesel 21 Mechanical Engineer 22 Senior Designer Electronics 23 Electrical Lay Out System Architect 23 Digital Designer Electronics 24 System Architect Hardware 24 Mechatronics System Architect 25 High Tech Design Engineer 25 System Architect Mechanical Layout 26 Lead engineer Precision Mechanics 27 Patent Examiners 27 Allround body shop without spraying / service engineer 28 Lead engineer E 28 Engineers 29 Wall and ceiling fitters 29 Oven-builders 30 Bricklayers 30 Façade Plasterers 31 Shutterers 31 Welder 32 Assembly worker/ Flange fitter 32 Pipe engineer (construction) 33 Machinefitter 33 Engineer / Monteur / Electrotechnic 33 OPERATING ROOM ASSISTANTS 34 NURSES 34
Control System Engineer 5 years exp 34 Project Engineer Offshore 35 Product development Engineer 35 INDUSTRIAL MECHANIC (French) 35 Mechanical Engineer 36 Electronical Engineer 37 Physics Engineer 37 Company Websites in English 38 Links with Europe 38 Colofon: 38
Realization Designer Engineer RBC Engineering Support is a technical project company that operates within the European region and is involved in Development & Engineering of High-Tech Machine hardware and software. We execute projects and offer know-how to high-grade companies and organizations in High-Tech industry, Energy & Infrastructure and Government & Education. Job The major responsibilities of this position are: Performs design on structural mechanical components and assemblies Prepares accurate complex drawings on damper equipment, inlet and exhaust systems in a productive manner within the allowed project time frame. Exhibits creativity in developing cost effective solutions to design problems Ensures compliance of design with contract documents and understand and is able to interpret customer technical specifications Preparation of technical specification for purchasing of electro and hydraulic parts Technical degree in Mechanical Engineering ( HTS-wtb or equivalent) or related Engineering degree Good knowledge of welding/ construction equipment and techniques Knowledge of AutoCAD and 3D systems is a must (Inventor is recommendable) Thorough knowledge of codes and standards applicable to steel fabrication Ability to communicate well both verbally and in writing as well as the ability to work with others Understanding of related shop processes and materials 2
Direct hands-on work is required and extensive travel is necessary Knowledge of the English language is required. German is recommendable Looking for candidates who are making a first or second step in their career We offer A highly dynamic, international organization with growth ambition Internal training and support by the Director of the Department Our salary and our benefits are market value. Work location will be in Heerlen. For questions regarding this vacancy you can contact Luuk Rothkrantz at the following number +31 (0)6 25 49 02 96 or send a e-mail to
[email protected]. WERKbedrijf Venlo Vacancy number WBS4051413/20-09-2013
Engineer Aftertreatment Systems Engineer Aftertreatment Systems Within the PACCAR Inc. DAF Engine Development is the center of competence for engine development. In our state-of-art engine development center we develop engine families for the future regulations. Our engines and trucks are best of class products in the transportation world being always driven by providing environmentally friendly products with best cost-effectiveness and highest reliability for our customers. As a globally working company we do offer optimal opportunities to contribute to our success in a multicultural team. • Development of aftertreatment performance in order to meet development targets, e.g. to meet future emission regulations. • Development of problem solutions and realization of solutions in close cooperation with internal and external development partners. • Developing test procedures for calibration and supervision of heavy duty engine aftetreatment tests on engine dyno’s • Documentation and evaluation of testing results • Application support for vehicle related engine aftertreatment applications. • Collaboration in project teams • Bachelor degree on Mechanical Engineering with specialization on internal combustion engines.
• Detailed knowledge in the field of thermodynamics, combustion and control engineering • At least 3 years of diesel engine application experience preferably on HD truck engines • First practical experience on diesel engine exhaust after treatment (EAS) interaction. (SCR, DPF) • Structured working approach combined with pleasure to work in teams. • Enthusiasm to deal with complex engine-EAS systems For questions regarding this vacancy you can contact Luuk Rothkrantz at the following number +31 (0)6 25 49 02 96 or send a e-mail to
[email protected]. WERKbedrijf Venlo Vacancy number WBS4051013/20-09-2013
Piping Engineer Researches, develops, designs, and tests a variety of equipment, facilities, components, products, and systems for commercial and industrial purposes: Evaluates the desired goal of the system and develops, designs, or selects the required equipment, power controls, piping, structures and earthwork to achieve the goal Performs calculations and evaluations in the design of equipment and systems for industrial and commercial applications Participates in planning, cost development and management, and scheduling for assigned projects Directs activities to ensure that construction, installation, and operational testing conform to functional specifications, recognized codes and standards, and customer requirements Maintains effective communication with project team members and with the customer May direct and coordinate operation, maintenance, and repair of equipment and systems in field installations May use computer-assisted engineering and design software and equipment to perform engineering tasks Level: Bachelor degree (Electro)Mechanical Engineering or equivalent Knowledge: Performs routine aspects of engineering requiring knowledge and application of basic engineering principles under close 3
supervision; work is reviewed for adequacy and accuracy.
Contact: mr
[email protected] RBC Engineering Support
Contact : E-Mail
[email protected] WERKbedrijf Venlo Vacancy number WBS4050613/20-09-2013
WERKbedrijf Venlo Vacancy number WBS4050413/20-09-2013 Vervaldatum Vacancy number WBS13-12-2013
(Senior) Systems Engineer
INDUSTRIAL MECHANIC
The Systems Engineer is the key person in the development team. He or she drafts equipment specifications based on process- and other requirements, expands those specifications to design specifications and guards the correct implementation of those. The System Engineer documents specifications, design concepts and test procedures and involves sub-contractors for well-documented design, manufacturing and testing tasks. A typical team within OLED Technologies consists of a Project Manager, a Systems Engineer, a Process Engineer, various Design Engineers and an Application Engineer. Demands: 5+ years of experience in the design of complex high technology manufacturing equipment Self-starter, customer-focused, able to work with incomplete or implicit specifications Able to switch and connect between specification, concept and details In-depth knowledge of mechanical systems and a good understanding of electrical systems Affinity and (preferably) experience with vacuum and printing technologies Good documentation and communication skills The Senior Systems Engineer must fulfill the additional requirements below: Group leader or management team ambition and proven ability Exceptional quality awareness; able to transfer this attitude to other team members Procedure-minded without being rigid 10+ years of multi-disciplinary professional experience Experience with high-level communication (board level) Willingness to travel Bachelors or (preferably) master’s degree in mechanical engineering
As a Mechanic, your main task is to keep the production lines in a good technical condition. This includes all machines, transportation systems and peripherals. You are constantly working on the improvement of the quality and the quantity of the production. We are looking for candidates with an affinity for our industry . Function description: As a Mechanic, your main task is to keep the production lines in a good technical condition. This includes all machines, transportation systems and peripherals. You are constantly working on the improvement of the quality and the quantity of the production. After an internal training program, you perform independently the final checks on the functioning of the machines. When the production lines are not running, you will give preventive maintenance, do repairs and revisions from the front-end to the back-end of the production lines. To keep the high quality of our product, you will perform adjustments of allocated machines according to the technical requirements. You are responsible for the proper administration of the production data and any product defects. Function requirements: Your Englisb is understandable. You are accurate, able to perform well under pressure and you have a good sense of responsibility. You have a flexible attitude and are willing to work in 3 shifts, weekends and holidays if necessary. You have (at least 2 years) experience in maintenance of industrial production machinery and you understand the importance of quality and safety. You are able to switch easily between different tasks in different machines. Mivisa offers: A challenging and diverse work environment A shift allowance of 14%, extra hours paid according to the ¨CAO Metaal & Techniek¨ 4
(A minimum of) 38 hours per week guaranteed Internal career opportunities Demands: You have (at least 2 years) experience in maintenance of industrial production machinery and you understand the importance of quality and safety. You are able to switch easily between different tasks in different machines. U moet beschikken over uitstekende mondelinge en uitstekende schriftelijke taalvaardigheid in het Engels. Contact: dhr. R Vasquez Ribelles
[email protected] Professional Recruitment Agency Netherlands WERKbedrijf Venlo Vacancy number WBS4045213/19-09-2013
INDUSTRIAL ELECTRICIAN We are looking for candidates with an affinity for our industry Function description: As an Electrician, your main task is to keep the production line in a good technical condition. After an internal training program, you start working in shifts to optimize the electrical elements in the production process, their quality and their technical reliability. This means that you help to invent solutions for problems that could occur during you shift. You are able to perform modifications on the electrical installation and do specific assignments in the factory. To keep the high quality of our product, you will do adjustments of allocated machines according to the technical requirements. When the production line is not running, you will give preventive maintenance, perform repairs and revisions on electrical elements from the frontend to the back-end of the production lines. Function requirements: Your English is understandable. You are eager to learn, able to perform well under pressure and you have a good sense of responsibility. You have a flexible attitude and are willing to work in 3 shifts, weekends and holidays if necessary. You have (at least 2 years) working experience in maintenance of electrical industrial production machinery and you understand the importance of quality and
safety. You are able to switch easily between different tasks in different machines. Mivisa offers: A challenging and diverse work environment A shift allowance of 14%, extra hours paid according to the ¨CAO Metaal & Techniek¨ (A minimum of) 38 hours per week guaranteed.
Ce qui peut vous attendre de nous? • Une emploi stimulant à plein temps dans une entreprise internationale • Salaire sur de 3.000,00 bruts par mois • Une voiture, ordinateur portable, téléphone • Accumulation de pension • 25 jours fériés et Pécule de vacances de 8%
Contact: dhr. R Vasquez Ribelles :
[email protected] van Professional Recruitment Agency Netherlands WERKbedrijf Venlo Vacancy number WBS4044813/19-09-2013
• D'un baccalauréat ou d'économie commerciale, master équivalent • Parle couramment le français et l'anglais. Une langue supplémentaire est un avantage • Connaissance de l'industrie des FMCG et de la nourriture est un plus U moet beschikken over goede mondelinge en goede schriftelijke taalvaardigheid in het Contactinformatie : mr. B Kipshoven de StartPeople International Recruitment E-Mail
[email protected] WERKbedrijf Venlo Vacancy number WBS4042813/19-09-2013
Sales manager France Descriptionde l'organisation Une entreprise internationale dans le régionde Arnhem qui porté sur leFMCG et où l'anglaisest la langue officielle. Description du poste Vous êtes le gestionnaire des ventes françaises autochtone nous recherchons? Maîtrisez votre excellente culture française et parle couramment l'anglais et le français et tu a une expérience dans la vente? Alors, vous êtes le personne que nous cherchons! Il s'agit d'un poste à temps plein. Dans le rôle de gestionnaire des ventes françaises autochtone, tu construire une propre base de clients. La tâche principale est vendre une base de données qui met l'accent sur la grande consommation. La base de données fournit des informations sur les principaux développements dans le domaine des tendances, les nouvelles technologies, les emballages et les brevets. Cet objectif est atteint par visiter de clients actifs pour aller assister à des conférence set en organisant des réunions en ligne. Les six premiers mois, vous obtenez une formation interne. Après la formation interne vous travaillez à domicile en France. Les exigences d’emploi • D'un baccalauréat ou d'économie commerciale, master équivalent • Parle couramment le français et l'anglais. Une langue supplémentaire est un avantage • Connaissance de l'industrie des FMCG et de la nourriture est un plus • Une forte personnalité et tuesttrès fort communicatif • Proactive, flexible et pas de 9 à 5 mentalité 5
Experienced CNC turn/miller/grinder Job offer for the position CNC turner and miller / grinder What are we looking for? Start People International Recruitment is Recruiting employees who want to work in the Netherlands. At this moment we are looking for experienced CNC millers and turners. What do we ask: - Minimum of 2 years experience with CNC machines like Victor, Zayer, Doozan en Pama is required - Minimum of 1 year experience with the operating systems Haidenhain and/or Fanuc is required - Minimum of 1 year experience in the metal industry is required - Reading and understanding technical drawings is required - Knowledge of measuring with a micrometer and a marking gauge is required - Willing to work in 2 or 3 shifts - Physically in good shape, able to lift heavy objects - Good communication skills in the English language (B2 level) is a must!
What do we offer: - Work in a well known company - Work for a longer time - Extra payment for working in shifts - Help with the Dutch rules and regulations
• Work closely together with all departments involved in the change processes (e.g. operations, IT, Finance, etc.) • Effective participation in meetings/workshops with customer
Contact: P. van der Grinten
[email protected] WERKbedrijf Venlo Vacancy number WBS4042513/19-09-2013
KNOWLEDGE, SKILLS AND EXPERIENCE REQUIRED • Degree: Master-degree in Logistics, Industrial Engineering and Management Science or Business • Excellent knowledge of MS -Excel, -Access, Visio, -Word, -Projects, -PowerPoint • Know how of requirement analysis, process design and information flows • Know how of IT systems • Know how of warehousing and distribution (preferably in SPL environment) • Know how of project management principles and applications • Able to communicate effectively, internally and externally, at all levels • Must be fluent in English, speaking, reading and writing (preferred also German and/or French) • Must be flexible in time and place • Keywords are initiative, communicator, coordinator, team worker, stress resistant and analytical mind. Contact: mr. P. van der Grinten
[email protected] WERKbedrijf Venlo Vacancy number WBS3978813/17-09-2013
EMEA Project Analyst, grade 1c PLACE IN ORGANIZATION Service Parts Logistics (SPL) Operations EMEA, reports to (senior) project manager JOB PURPOSE • To support and initiate improvement of existing processes and successful implementation of new processes or services across all accounts in the EMEA Post Sales network • To generate solid information and enable management decisions related to change in the EMEA Post Sales network • To help build and upkeep a ‘knowledge centre’ for existing processes, (past) change initiatives and implementation of change KEY RESULT AREAS • Process and data analysis • Cost/Benefit analysis (CBA) on all Post Sales customers • Development, design and evaluation of the EMEA Post Sales network • Analysis of commercial, operational and financial implications of proposed change • Development and maintenance of models used to better understand and predict specific business needs (e.g. capacity model) • Understanding and effective use of standardized templates and models • Understanding of all Post Sales visibility, WMS and order management tools • Coordination of and clear communication on implementation of change • Coordination of user acceptance testing (UAT) for releases to the warehouse management system (WMS) • To develop initiatives to better meet customer demands while further enhancing revenue and profitability for the organization 6
Welder A Certified Welder uses expert welding techniques in construction, piping and sheet metal applications, which produce welds and welding joints to certified standards.You have 6g and 6gr certificates POSITION WITHIN ORGANISATION: Indirectly managed by the company’s Operations Manager or his/her deputy. Supported by the Head of Personnel the company or his/her deputy. Placed by the company with a suitable manufacturing company (the Client), for the completion of specific tasks. Managed by and reporting to the appropriate Line Manager within the Client’s organization. Communicating and cooperating with colleagues at the Client’s organization, on the correct working methods and processes for
a particular task. JOB ACTIVITIES: Analyzing engineering drawings and weld instructions, to determine the appropriate welding methods, weld process and fabrication sequence. Organizing own workplace and correctly placing the required weld fume extraction equipment. Inspecting welding tools and filler materials, as well as checking whether pre-heated materials have the correct temperature and/or preproduced components have been fabricated according to the drawings. Completing welding work in accordance with the welding instructions and fabrication sequence agreed. Inspecting own work with the measuring tools available, to ensure it meets the specifications for dimensions and weld deposition, while keeping surface imperfections (i.e. weld burns, heat tint, heat discoloration) and slag (or flux residue) to a minimum. Taking great care to obtain the best quality finish after completion of welding work, by removing any slag or particulate matter. Ensuring the weld is defect-free and that it meets the acceptable levels of residual stresses and distortion. Offering the work for inspection to a Line Manager or Quality Auditor. Completing other workshop activities as required. Demands:: A vocational qualification as Certified Welder, o(known in the Netherlands as “Bemetel/SOM/Kenteq and NIL elektrisch en/of Mig Mag lassen niveau 3”.) A minimum of 5 years working experience as C Successful completion of courses in the following areas: 6G/ 6GR certificates in Duplex are a required Location: ARNHEM. ontact: mr. van Soest; van Caminos verdes BV E-Mail
[email protected] WERKbedrijf Roermond Vacancy number WBS3978413/17-09-2013
Experienced Inventory Controller EXPERIENCE (3YEARS) AS INVENTORY CONTROLLER IS MANDATORY!!! PLACE IN ORGANISATION Reports directly to Supervisor JOB PURPOSE 7
• Handle stock discrepancies/ manage inventory control • Check Internal WMS and Customer Systems • Organizes and controls periodic stock counts • Management reporting KEY RESULT AREAS • Very strong analytical skills • Well organized, detailed and accurate in maintaining the filing system • Capability of handling computers systems • Fluent in English (speaking/writing/reading) • Monitoring daily stock transactions • Daily/weekly and monthly management reporting on activities • Contact with customers, suppliers, hauliers, visitors by telephone and/or in person. • Organize cycle counts • No 9 to 5 mentality, flexibility at Q-ends and Month-ends • Team player KNOWLEDGE, SKILLS AND EXPERIENCE REQUIRED • Bachelor level or MBO+, Inventory Controller experience, preferably HBO level • Office windows +access • Knowledge of various computer software (Excel/Acces etc) • Fluent in English Contact: mr.P. van der Grinten
[email protected] WERKbedrijf Venlo Vacancy number WBS3978213/17-09-2013
Process Engineer assess sensor EXPERIENCE IN THE AUTOMOTIVE INDUSTRY IS MANDATORY!!!! Within the department Product Management Team (PMT) of the European headquarters in Almelo we have a vacancy for a Process Engineer. The PMT is responsible for development of the production processes and for the overall operational management of the business. Most important tasks and responsibilities: - Develop new production processes and/or adapt existing production processes for the assembly, calibration and testing of automotive sensors.
- Define specifications for production equipment and interact with equipment suppliers to ensure equipment will meet specifications. - Optimize and help solving problems in existing production processes. - Participate in global New Product Development (NPD) project teams to enable successful launch of new products. - Initiate improvement plans for efficiency, capacity, costs, lead time and quality of production. - Keep in contact with other departments on process specifications, quality aspects, product specifications and continuity of equipment. - Analyze products and implement changes to improve the products and the processes. Company: As a world leader and early innovator in mission-critical sensors, electrical protection and power management solutions, we work with leading global customers and brand names you’ll recognize on custom-engineered applications that improve safety, efficiency and comfort for millions of people every day. Our products include: - Thermal circuit breakers that make planes safer - Pressure sensors in automotive systems that aid in vehicle stability and emission control - Bimetal current and temperature control devices in electric motors that prevent overheating and fires You’ll find our devices in a wide range of applications throughout the automotive, appliance, aircraft, industrial, military, heavy vehicle, heating, air-conditioning, data, telecommunications, recreational vehicle and marine industries. It’s likely that you depend on one or more of our devices every day. Educational requirements: - Masters degree in mechanical engineering, electrical engineering or (applied) physics. - Bachelor degree in mechanical engineering, electrical engineering or (applied) physics combined with relevant work experience. Additional requirements: - Technical expertise to assess sensor product design on manufacturability. - Good understanding principles of Design for Assembly and 6 Sigma tools. 8
- Good understanding of basic assembly techniques (welding, wire bonding, dispensing, etc.). - Basic understanding of (automotive) quality systems and control. - Financial acumen to set up cost estimates and analyses. - Good communication skills, written and verbally in English and preferably German language. - Good social skills to initiate and drive activities in various production sites in other countries. - Able to effectively interact with customers. - Pro-active attitude and clearly capable of setting priorities. - Project management skills to lead and participate multidisciplinary, global teams - Knowledge of MS-Office software (Word, Windows, Excel and Outlook). - Prepared to travel and work abroad on a regular basis - Masters degree in mechanical engineering, electrical engineering or (applied) physics. Bachelor degree in mechanical engineering, electrical engineering or (applied) physics combined with relevant work experience. Contact: P. van der Grinten
[email protected] WERKbedrijf Venlo Vacancy number WBS3849713/09-09-2013
Design engineer high temp sensors Responsible for design and development of high temperature sensors components (ceramics, screen-printing inks and sintered structures) for the automotive industry. A Design Engineer finds solutions for customer needs. Fits specifications and translates this to components and assembly. Tests and proves agreed on specifications. Is responsible for the product, from first customer contact until mass assembly. Works in international teams and with international customers. Company: As a world leader and early innovator in mission-critical sensors, electrical protection and power management solutions, we work with leading global customers and brand names you’ll recognize on custom-engineered applications
that improve safety, efficiency and comfort for millions of people every day. Our products include: • Thermal circuit breakers that make planes safer • Pressure sensors in automotive systems that aid in vehicle stability and emission control • Bimetal current and temperature control devices in electric motors that prevent overheating and fires Educational requirements: • MA education level, mechanical or electrical engineering or applied physics. • BA education level, mechanical or electrical engineering or applied physics. Additional requirements: • Experience in the area of product design or R&D. Teamplayer, able to work in multidisciplinary project teams . • Knowlegde of MS-Office software (Word, Windows, Excel and Outlook). • Pro-active attitude. • Prepares to travel abroad. • MA education level, mechanical or electrical engineering or applied physics. • Experience in the area of product design or R&D of ceramics, screen-printing inks and sintered structures) Contact: P. van der Grinten
[email protected] WERKbedrijf Venlo Vacancy number WBS3849413/09-09-2013
SENIOR PHP DEVELOPER The team lead is responsible for the implementation of creative marketing activities into the mobile/digital channel such as cross platform applications, online social media applications and HTML5 mobile banner campaigns. MobGen recently implemented a Social Media specialized division as well as an online gaming development division. Responsibilities • Ability to lead technical projects, ensuring the wishes of the client and end-user are kept in mind before, during and after the completion of projects.
9
• Working with Creative and Technical teams and external companies on a growing portfolio of Social Media applications and games. • Creating technical designs and managing timely implementation of high-traffic web sites. Keeping in control of project specifications, company's design, coding and performance tuning standards. • Further investigating the development of emerging mobile web technologies, social media solutions, etc. • Working closely with other development units in the company to share information regarding application subject matters and know-how. Job requirements: • Possess strong experience with PHP, MySQL, XML and JSON; • Extensive knowledge of Javascript (jQuery), HTML (5) / CSS (3); • Solid Understanding of OOP and MVC; • Previous experience in the mobile area is a big plus; • Experience in one or more of the following techniques and software is a big plus: Flash (Actionscript 3), Photoshop, Linux, SVN, Smarty, Facebook API, Yii framework • Experience as team leader is a strong advantage; • Experience in setting up technical architectures; • Capable of clarifying complex problems and structures to a broad audience; • Experience in large IT projects, preferably in the mobile area; • Communicative, accurate and pragmatic; • Strong analytical and creative problem solving skills; • At least 4 years of experience; • Good knowledge of English spoken and written; We offer • Market based salary; • Starting period: as soon as possible; • Great deal of personal responsibility; • Working with and learning from an experienced top-team; • Work setting is a beautiful location in the center of Amsterdam; • Opportunity to become part of a fast growing international mobile marketing agency. Location: AMSTERDAM. Contact: mr. Erdal Egin:
[email protected] WERKbedrijf Alkmaar Vacancy number WBS3831813/06-09-2013
SOLUTION ARCHITECT MOBILE PLATFORMS
● Support the sales team in gathering requirements and developing a solution that fits with a strong value proposition.
The Solution Architect is responsible for the technical management of the projects for mobile platforms (iOS, Android, Mobile web). As a Solution Architect you will be managing an experienced top-team, with which you bring the projects through all the phases (from requirement scoping to the delivery of the product).
Customer Satisfaction: ● Manage the customer satisfaction process, so that every engagement is rated and scored. ● Achieve a project client satisfaction rating per engagement at or exceeding corporate target.
RESPONSIBILITIES Scope Management: ● Work with clients to identify key business objectives in order to define how the requirements will be transformed in features in the mobile solution. ● Perform business process and management consulting analysis in order to further define and detail the scope of work. ● Manage the scope of the project from inception to closure including processing any needed change orders.
● Possess strong technical background in order to provide detailed estimations on timing and costs; ● Certification in Project Management is a plus (PMP, PRINCE2, Certified Scrum Master); ● Experience with developing for mobile operating systems is a plus; ● Capable of clarifying complex problems and structures to a broad audience; ● Experience in large IT projects, preferably in the mobile area; ● Communicative, accurate and pragmatic; ● Strong analytical and creative problem solving skills; ● Motivated (hungry to learn), organized and responsible personality (own initiatives are appreciated); ● Some familiarity with UI, UX and design processes; ● Good knowledge of English, both spoken and written;
Project Schedule, Budget, and Resource Management: ● Define and develop implementation schedules and project budgets. Set expectations in terms of time and budget required to accomplish technology and business objectives with the client and internal team members. ● Ensure effective completion of project milestones by allocating and managing project resources. Actively maintain all project schedules, resource plans, and budgets throughout the project lifecycle. ● Work with the CTO and senior management to ensure companywide goals for resource utilization are achieved. Quality Management: ● Work with projects leads to ensure projects are delivered to specifications while also managing to the defined scope of work. Client Relationship Management and Sales Support: ● Work with the sales team and practice leadership to build solid client relationships that position the manager and key team members as trusted advisors to the client.
10
JOB REQUIREMENTS
WE OFFER ● Market based salary; ● Start period: as soon as possible; ● Great deal of personal responsibility; ● Working with and learning from an experienced top-team; ● Work setting is a beautiful location in the center of Amsterdam; ● Opportunity to become part of a fast growing international mobile marketing agency. JOB REQUIREMENTS ● Possess strong technical background in order to provide detailed estimations on timing and costs; ● Certification in Project Management is a plus (PMP, PRINCE2, Certified Scrum Master); ● Experience with developing for mobile operating systems is a plus; U moet beschikken over uitstekende mondelinge en uitstekende schriftelijke taalvaardigheid in het Engels. Contact: mr. Erdal Egin
[email protected]
WERKbedrijf Alkmaar Vacancy number WBS3831213/06-09-2013
Flight Control Aerospace Engineer, Wind Energy The position will cover a wide area of flight control engineering, with lots of room for creativity and flexibility in problem solving. The Control Engineer participates in the development and evaluation of the entire PowerPlane flight control system and its operation. Tasks include: modelling, tools development, optimization, simulation and flight testing, with a focus on control system development. The Control Engineer is part of Ampyx Power’s control system team and gets the opportunity to work with global experts in the field. Regular collaboration with other disciplines in Ampyx Power is expected in project teams (aerodynamics, aircraft structures, software, electronics, conceptual design, etc). The Control Engineer will work in a dynamic environment, and should have the flexibility to be assigned to a variety of tasks and be willing to adapt to changes in scope.
Masters degree in Control Engineering (preferably aerospace related), Location: The Hague Contact: Euresadviser Barbara Gorter-Zahuta,
[email protected] WERKbedrijf Den Haag Zuidwest Vacancy number WBS3820713/05-09-2013
Experienced (5+yrs) 254SMO Welder We are looking for 12 Welders for a period of 8 Months, Wanted profile, Tig welders with 5 years experience with DUPLEX (254 SMO), preferable with Certificates if not we will arrange that, but then will take between 2 and 5 days. They will work 5 months in The Netherlands and 3 months in Hungary. They need to have experience in machine construction. English, level communicative
Requirements: Applicants should have at least a Masters degree in Control Engineering (preferably aerospace related) and should have a strong theoretical background in flight dynamics and control (emphasis optimization, state estimation or advanced control is strongly desired) but mostly a tangible experience in controller design, simulation, testing and data analysis. A broad understanding of the control systems field. -Experience with requirement development, associated certification compliance and verification is desired. -Excellent Matlab and Simulink skills are required, C programming skills are desired. At least three years of relevant industry experience, with hands-on experience in Controller implementation is required. Job may involves flight testing that require long days, once or several days in the week. This can be discussed. Initially contract for 1 year with possibility to extension or permanent job. If you are interested send please your CV and application letter to Euresadviser Barbara GorterZahuta,
[email protected] 11
The project will start in the short term but it is not yet indicate when exactly. This can take between 2 to 7 weeks. We are waiting for more information about accommodation and salary, could be good if candidate give a salary indication. Demands: Tig welders with 5 years experience with DUPLEX (254 SMO), preferable with Certificates if not we will arrange that, but then will take between 2 and 5 days. Contact: dhr. R Vasquez Ribelles
[email protected]
Professional Recruitment Agency Netherlands WERKbedrijf Venlo Vacancy number WBS3811613/05-09-2013
Maintenance Manager Extrusion EXPERIENCE AND KNOWLEDGE OF EXTRUSION EQUIPMENT IS MANDATORY!!
Start People International Recruitment is looking for an experienced maintenance manager with solid experience in aluminium extrusion. The candidate must be able to build a new structure for the maintenance department. The work will be in shifts. Job tasks • Developing and maintaining an efficient and service directed organization to realize targets at minimum costs • To reach a minimum technical breakdown for optimal operational availability • To establish, improve and extend the technical installations in order to achieve selected standards • To participate in the strategic and operational planning of maintenance, engineering and manufacturing issues, resulting in a reduction of cost on a long term; • Develop an efficient and effective maintenance plan of equipment with the Managers of each department, as well as maintaining and controlling equipment, in order to achieve minimal technical breakdown of equipment and improve it’s productivity. • Recommending, designing, acquiring and installing selected equipment modifications and/or new equipment to create an economic and safe work environment Required knowledge and education This position requires an higher education level or university level in mechanical or electrical engineering with preferably knowledge of hydraulics. • Knowledge as a maintenance manager is a must • Good knowledge of the Extrusion equipment • Good knowledge of the spare parts and equipment market • Theoretical and practical experience of the extrusion processes • Principles of leadership and support on changing processes • Theoretical and practical experience in maintenance management • Experience in change management Required personal skills • Leadership, able to lead a team of 10 maintenance technicians • Critical thinking • Out-of-the-box thinking • Excellent communication skills in the English language. • Self confidence 12
• Attention to detail Gross Salary Average salaries for academic starters range between € 2,700 and € 3,400 gross a month – also depending on education and experience, which comes down to around € 2,100 - € 2,800 net a month. After a Phd you will obtain € 500 extra. Fringe benefits • Average of 25 to 35 holiday days per year • In The Netherlands every employee has the right to 8% yearly holiday money • Almost every company offers pension insurance, most part paid by the employer • When you get ill you’ll most of the time get paid a 100% during your illness • Health insurance costs are average € 100 per month • In certain cases of unemployment, you can receive government allowance Demands: This position requires an higher education level or university level in mechanical or electrical engineering with preferably knowledge of hydraulics. • Knowledge as a maintenance manager is a must • Good knowledge of the Extrusion equipment. Contact: P. van der Grinten
[email protected] WERKbedrijf Venlo Vacancy number WBS3750713/02-09-2013
Mechatronics Engineer MSc or PhD Job Mission The department Mechatronics Systems Development is responsible for specification, design, integration and qualification of the mechatronics sub-systems and components which are fitted into the end products. The main focus is on nanometre-accuracy positioning of high speed components for transporting/positioning of wafers and reticles and adjustments of optical elements. As mechatronics designer you will be employed in one of these focus areas, where you have the opportunity to develop yourself in the knowledge that you find interesting. This means that ASML gives you the chance to grow as fast as you want. Job Description
• Work in multidisciplinary project teams, aimed at design of mechatronic modules. • Specialist in designing (electro-magnetic) actuator systems. • Breakdown of specifications into detailed specifications. • Select critical components and technologies. • Integration and test. • Document design, analysis and test results. While working on the above, you deal with actuators, dynamics, mechanics, motion control, thermal behaviour, sensors and electronics. Education Technical University (Master) or PhD in Applied Physics, Electrical Engineering or Mechanical / Mechatronic Engineering. Experience Knowledge in the fields control-engineering, signal analysis and testing. Basic knowledge of the areas dynamics, position measurement and actuator systems. Experience in the following competences is a pre: • Documentation of specifications, design, and test results. • Design of control-systems and execution of integration the modules. • Specification of subsystem and/or its components. • Support architectural design and make trade-offs between mechanical, electronic, software solutions to realize the specifications. • Modelling of mechatronic systems in matlab/Simulink. • Support selection of critical components and technologies. • Integration and test of the module: planning and execution. • Theoretical or practical experience with position measurement systems, handling systems, control engineering, actuator design, dynamics. Personal Skills • Highly motivated, enthusiastic, flexible and a good communicator. • Think broad, learn fast, take responsibility, act decisive and show critical sense. • Work in a multidisciplinary team. • Convince others of your ideas. • Strong analytical ability with a pragmatic attitude. • Good knowledge of English. Fringe benefits 13
• Average of 25 to 35 holiday days per year • In The Netherlands every employee has the right to 8% yearly holiday money • Almost every company offers pension insurance, most part paid by the employer • When you get ill you’ll most of the time get paid a 100% during your illness • Health insurance costs are average € 100 per month • In certain cases of unemployment, you can receive government allowance. De Location: EINDHOVEN. Contact: P. van der Grinten
[email protected] WERKbedrijf Venlo Vacancy number WBS3719013/29-08-2013
SENIOR PATENT ATTORNEY As a senior patent attorney you contribute to the creation, development and exploitation of the diverse DSM patent portfolios in one or more business areas of DSM to which you are dedicated. As a senior patent attorney you contribute to the creation, development and exploitation of the diverse DSM patent portfolios in one or more business areas of DSM to which you are dedicated. Not only will you be able to enhance your professional expertise in global prosecution, you will also broaden your business skills while counselling the businesses on matters regarding intellectual property. •You have at least a PHD degree in polymer chemistry or related degree; •You are qualified as a European Patent Attorney with several years (34) post-qualification experience; •Management of the full patent life cycle; A detailed jobdescription is available on request. U moet beschikken over uitstekende mondelinge en uitstekende schriftelijke taalvaardigheid in het Nederlands en uitstekende mondelinge en uitstekende schriftelijke taalvaardigheid in het Engels. Contact: P. van der Grinten
[email protected] Vacancy number WBS3714013/29-08-2013
Mec. CAD Eng electrowetting display The Role: MIN. 7+YEARS OF RELEVANT EXPERIENCE As a Mechanical CAD Engineer you will responsible for the mechanical design, development and quality of electrowetting display products and tooling. You will contribute as a senior engineer and will take responsibility for leading mechanical design activities, technical problem solving, creatively meeting product and tooling objectives, at times delegating tasks to achieve your objectives and mentoring junior engineers. You will demonstrate cross-functional resource interaction to accomplish your goals. You will play a role in defining processes and methods to improve the productivity of the entire team. You will identify and initiate investigations of production technologies, prototype and test solutions for display product features, and design and validate production designs that deliver an exceptional user experience. You will demonstrate a strong working knowledge of mechanical systems, with expertise in 2D / 3D CAD design; the desire to learn from new challenges and the problem solving and communication skills to work within a highly interactive and experienced team. Candidates must show a hands-on passion for their work and be able to communicate their ideas and concepts both verbally and visually. Candidates must demonstrate an ability to integrate feedback and to respond quickly to changing contexts and work environments. Display cell design and related manufacturing (mask) tools using 2D CAD systems Display module design and related manufacturing, equipment & test tools using 3D CAD systems Research into materials and component technologies to scope development opportunities Detailed part design and product documentation Support positive team interactions to accomplish program objectives Provide cross-functional program integration support to insure team success Leading role to assure timely delivery of specific project deliverables Schedule and milestone management Managing interaction with suppliers and subcontractors (both local and overseas) 14
Applying technical expertise to problem solving throughout product lifecycle Mentoring junior engineers in good product design practice Basic Qualifications: Bachelor’s degree in Mechanical CAD Engineering or related field. 7+ yrs experience in consumer/handheld product development. Strong CAD skills, ProEngineer (3D) and AutoCad (2D). Demonstrated knowledge of tooling and materials process validation (SPC, Cp, CpK). Demonstrated design experience with high volume/high finish consumer electronics enclosure materials. Demonstrated design experience integrating component modules (I/O, Displays, Batteries, PCBs, etc.). Product validation experience (Shock/Drop, Cycle Testing, Environmental Testing). Preferred Qualifications: 5+ yrs experience in mechanical design of (LCD or similar) display modules and related manufacturing, equipment and test tools. Wildfire experience. Analytic problem solving skills. Demonstrated leadership and mentoring skills. This position will require international travel. Location: EINDHOVEN. Contact: P. van der Grinten
[email protected] WERKbedrijf Venlo Vacancy number WBS3711613/29-08-2013
Hardware System Eng (4+yrs exp.) MIN. 4 YEARS OF RELEVANT EXPERIENCE At imec, Body Area Networks Imec’s Body Area Networks group is looking for an enthusiastic electrical engineer to work as a hardware system designer of biomedical sensor systems in a body area network. The group is an international team, which develops future wireless and wearable healthcare applications that sense physiological signals and translate these signals to information that empower people to manage their health.
Your job: Hardware design of innovative prototypes combining achievements from Holst Centre technology research (IC’s) with state-of-the-art components. Including the following: • Developing demonstrators based on imec hardware and off-the-shelf sensors, DSP/microcontrollers and radio’s, while interfacing to PC’s, smartphones and other portable devices; • Cooperating with software and application experts to define specifications of hardware systems; • Interacting with customers to align on system requirements and review progress; • Supporting validation of developed systems in real-life or clinical studies; • Hardware testing and troubleshooting; • Testing and characterization of existing and new prototypes. Your profile: • MSc degree in electrical engineering, embedded engineering or a similar field; • 4+ years’ experience in low-power embedded analog and digital hardware system design, preferably in the field of wireless sensor networks and electronics; • Knowledge of biomedical sensor systems, signal integrity, EMC, power management (is a plus); •Experience in testing hardware and embedded s Software; • Tool experience, performing schematic capture and lay-out; •Excellent communication skills in English (written and spoken); • Flexible team player, actively helping other team members, you see changes as an opportunity to learn and grow; • Quick learner, able and interested in acquiring new skills and competences; • Hands-on attitude. Taking responsibility for the process from specification to implementation, testing and debugging, including communication and alignment with different stakeholders. We offer: A challenging position in an advanced and hightech environment, working on leading-edge technologies and having many international contacts. The possibility to publish and contribute to international conferences. Imec promotes continuous training and development. The salary is competitive and added with extra-legal benefits. 15
Location: EINDHOVEN. Contact: P. van der Grinten
[email protected] WERKbedrijf Venlo Vacancy number WBS3711013/29-08-2013
SERVICE ENGINEER (MARITIEM) as service engineer, you install our OctopusOnboard system onboard wesels worldwide, report to our office about completed installation tasks and you perform maintenance on existing installations. With you knowledge of marine systems ans electronic engineering, you are able to demonstrate profound installation skills during installation process. And with your knowledge you are capable of delivering the correct support to clients when needed. At our office you will test hardware and software and you will support our clients. Onboard a vessel you will instruct the crew about the system ans its features. As service engineer you will travel abroad frequently as well onshore as offshore. Most of the time you will work on your own onboard the vessel. Level: bachelor telematics Location: DALFSEN. Contact: ms. N Visser van Amarcon E-Mail
[email protected] Website: www.amarcon.com/ WERKbedrijf Enschede Vacancy number WBS3703013/29-08-2013
Improvement Analyst For one of our partners, Styron Netherlands, we are looking for an Improvement Analyst. Job Description We are accountable for continuously improving our Supply Chain performance, including cost reductions. The improvement analyst identifies, implements, and tracks these Supply Chain improvements. A solid understanding of our Styron businesses and Supply Chain is a prerequisite for being successful. If needed, you will spend your first 1218 months in a planning role to acquire that knowledge.
Your main responsibilities: •Identify, assess, and optimize the material flow and risk trade-offs across the supply chain at a tactical or strategic level (inventory, purchasing costs, production costs, logistics costs, product quality, asset utilization, productivity and customer service) •Optimize supply chain infrastructures (distribution networks, outsourcing) •Optimize supply chain work processes, business rules, and establish metrics in the areas of forecasting/demand planning, production planning, inventory management, order fulfillment and the S&OP process. •Design & test supply chain scenarios, process variability and trade-offs through modeling techniques in Excel •Act as an focal point in the areas of project management, supply chain optimization tools, approaches and methods •Manage cross-functional projects •Styron focal point for inventory working capital reporting. •Styron focal point for “Green Supply Chain” initiatives and reporting. Qualifications You have a Master or Bachelor degree in Supply Chain Management, Engineering or other Sciences and has experience in Purchasing, Manufacturing, Supply Chain or Logistics. You are able to apply logical thinking on complex optimization issues and can demonstrate a Six Sigma mindset by collecting & validating data instead of jumping into conclusions. You should be albe to deal with a lot of accountability and freedom to act. Moreover, you have technical proficiency in the use of computer applications (especially Excel) and experience with SAP is a plus. You are an analytical person and you are competent with regards to Initiative, Value Creation and Interpersonal Effectiveness. In addition, you have excellent knowledge of the English language (oral & written) and good knowledge of German is a pre. Our offer Competitive salaries and comprehensive benefits; an annual variable pay program that rewards team and individual performance and shares company, business or functional success; the chance to work on global teams. Toelichting dienstverband: Competitive salaries and comprehensive benefits; an annual variable pay program that rewards team 16
and individual performance and shares company, business or functional success; the chance to work on global teams. Location: HOEK. Level: You have a Master or Bachelor degree in Supply Chain Management, Engineering or other Sciences and has experience in Purchasing, Manufacturing, Supply Chain or Logistics. You are able to apply logical thinking on complex optimization issues. Apply online: http://www.depooter.nl/onsbedrijf/werkenmet depooter/allevacatures/reageer/?vacature=470
Contact: E-Mail
[email protected] Werkservicepunt Zeeuws-Vlaanderen Vacancy number WBS3683813/28-08-2013
Draftsman The primary responsibilities of the Draftsman are: • Develop detailed drawings and related specifications of mechanical equipment according to engineering sketches and specifications for bulk material handling systems • Analyze engineering sketches, specifications and related data and drawings to determine design factors as size, shape and arrangement of parts • Modify machine design to correct operating deficiencies or to reduce production problems • Use AutoCAD and other computer design/drafting equipment/software to develop designs and/or blueprints • Examine engineering drawings of parts, assemblies and installation to detect errors in design documents and confers with engineering personnel to resolve drawing and design discrepancies JOB REQUIREMENTS • Technical vocational education level • Familiar with Design Software/AutoCAD + 3 D Solid Modeling, SolidWorks, CATIA. Fringe benefits • Average of 25 to 35 holiday days per year • In The Netherlands every employee has the right to 8% yearly holiday money • Almost every company offers pension insurance, most part paid by the employer • When you get ill you’ll most of the time get paid a 100% during your illness • Health insurance costs are average € 100 per month
• In certain cases of unemployment, you can receive government allowance. Demands: Technical vocational education level • Familiar with Design Software/AutoCAD + 3 D Solid Modeling, SolidWorks, CATIA Contact: P. van der Grinten
[email protected] WERKbedrijf Venlo Vacancy number WBS3668313/27-08-2013
Allround mecanical engineer The primary responsibilities of the Mechanic / Mechatronica Engineer are: • Assembly / pre-assembly of mechanical subgroups • Electronics, wiring of machines, testing • Pneumatical installations, assembly and testing • Milling, lathe, drilling, tapping • Welding (TIG and MIG) JOB REQUIREMENTS • Technical vocational education level • Acceptable level of English listening and speaking (B2) Fringe benefits • Average of 25 to 35 holiday days per year •In The Netherlands every employee has the right to 8% yearly holiday money • Almost every company offers pension insurance, most part paid by the employer • When you get ill you’ll most of the time get paid a 100% during your illness • Health insurance costs are average € 100 per month • In certain cases of unemployment, you can receive government allowance. Location: EINDHOVEN. Demands •Technical vocational education level Experience with Milling, lathe, drilling, tapping Welding (TIG and MIG) is mandatory!! Contact: P. van der Grinten
[email protected] WERKbedrijf Venlo Vacancy number WBS3667813/27-08-2013
17
CNC Programmer / Turner / Miller Employer: Brainport Industries Eindhoven The primary responsibilities of the CNC Programmer / turner / miller are: • Programming and setting CNC turning en milling machines • Creating and modifying drawings of machine parts and suspensions JOB REQUIREMENTS • Proficiency with writing CNC programs in a machining environment • Proficiency with CAD (solid modeling) and CAM software • Familiar with SolidWorks and/or CATIA is a plus • Acceptable level of English listening and speaking (B2) Demands: • PROFICIENCY WITH WRITING CNCPROGRAMMS IN A MACHINING ENVERONMENT IS MANDATORY!!! Contact: P. van der Grinten
[email protected] WERKbedrijf Venlo Vacancy number WBS3667613/27-08-2013
Process Development Eng - Chemicals A PHD in CHEMICAL AND/OR POLYMER PROCESS TECHNOLOGY IS MANDATORY!! SABIC’s Technology and Innovation (T&I) network consists of more than 1500 employees across six research- and ten application centers around the world. The T&I organization supports SABIC’s global businesses in realizing its objectives by providing Best-In-Class Technology solutions. In Europe, the SABIC Technology Center (STC) is based in Geleen (The Netherlands). The primary activity of STC Geleen is to define and to work out research projects aimed at the optimization of existing petrochemical and polymer processes and development of new ones. Our Technology Development department has three openings for process development engineers. The Challenge As a process development engineer you will be working in the Technology Development department of SABIC Technology Center Geleen
as part of the professional and international Technology & Innovation organization. Your tasks and responsibilities include: • To improve olefin production processes and product performance in terms of output, quality, consistency and costs. • To work in a multidisciplinary setting, both within Technology & Innovation -where you will collaborate with different disciplines- and in the business and manufacturing environment -where project approval and implementation needs to be secured. • To manage development projects: to effectively define goals and priorities and identify the activities and resources needed to achieve these goals. • To develop and communicate a vision of new developments in petrochemical process technology. Your Profile • You are educated to PhD level in chemical or polymer process technology. • Ideally, you have some process development experience in an industrial R&D organization in the field of polyethylene and/or polypropylene. • You are a critical observer as well as a conceptual and analytical thinker. • You are able to spot opportunities for existing and new processes and products and translate these into value propositions for the business. • You are able to present your project proposals and results in a convincing manner to both business and manufacturing management. • You have preferably experience in reactor engineering, kinetic modeling, design and operation of unit operations and the use of computational tools for the design and flow sheeting of polymer production processes. • You are able to keep abreast of the state of the art in process technology and gain knowledge of associated fields and disciplines. • You are a team player but you are also able to work independently on your contribution. • You have a persevering and challenging attitude towards your work environment, but you can also accept other views. • You are fluent in oral and written English. Gross Salary Average salaries for academic starters range between € 2,700 and € 3,400 gross a month – also depending on education and experience, which comes down to around € 2,100 - € 2,800 net a month. After a Phd you will obtain € 500 extra. 18
Fringe benefits • Average of 25 to 35 holiday days per year • In The Netherlands every employee has the right to 8% yearly holiday money • Almost every company offers pension insurance, most part paid by the employer • When you get ill you’ll most of the time get paid a 100% during your illness • Health insurance costs are average € 100 per month • In certain cases of unemployment, you can receive government allowance. Location: EINDHOVEN. Demands: You are educated to PhD level in chemical or polymer process technology. • Ideally, you have some process development experience in an industrial R&D organization in the field of polyethylene and/or polypropylene. . Contact: P. van der Grinten
[email protected] WERKbedrijf Venlo Vacancy number WBS3665113/27-08-2013
Order Project Manager A finished technical higher education (Mechanical Engineering). Understanding of project management and indepth product knowledge. Excellent organizational, analytical and communication skills. Creative and innovative team player and initiator. Gross Salary Average salaries for academic starters range between € 2,700 and € 3,400 gross a month – also depending on education and experience, which comes down to around € 2,100 - € 2,800 net a month. After a Phd you will obtain € 500 extra. Fringe benefits • Average of 25 to 35 holiday days per year • In The Netherlands every employee has the right to 8% yearly holiday money • Almost every company offers pension insurance, most part paid by the employer • When you get ill you’ll most of the time get paid a 100% during your illness • Health insurance costs are average € 100 per month Location: EINDHOVEN.
Contact: P. van der Grinten
[email protected] WERKbedrijf Venlo Vacancy number WBS3664113/27-08-2013
Lead Mechanical Engineer As a Lead Mechanical Engineer you will be working on innovative projects in the High Tech and Automotive industry. On one hand, you will communicate directly with the customer on deliverables and specifications and, on the other hand, you will be responsible for coaching a team of junior engineers allocated to the project. Moreover, we expect you to have the ability to specify and design modules and/or functionality to realize required performance, using state of art design methods and construction principles. When needed you will ensure that prototypes are built and that the proper tests would be carry out. In sum, you will be the linking-pin between Segula (management and mechanical team) and the OEM client for technical, managerial and technical purposes. As a result, you will be working partly at the client side, partly at the Segula office at the High Tech Campus.
• You are able to transfer your expert knowledge to others at customer site and within the Segula organization. Additional: • Living or open to relocate to the Netherlands (Eindhoven region); • Proficiency in English; Dutch is a big plus. Our offer: • You have the chance to work within a challenging, international and innovative environment with specialized and experienced colleagues; • A motivated and multicultural team in a growing organization with lots of ambition; • The possibility to develop yourself and to experience rapid professional growth in line with the organizational growth and the variety in projects; • Have access to the state of art design methods and tools; • Long term perspective and a permanent contract.
Your profile: Education and experience: • BSc or MSc degree in Mechanical Engineering or equivalent; • You have at least 5+ years of experience in Mechanical Design in the High Tech and/or Automotive branch; • Excellent understanding of mechanical aspects like thermal stability, stiffness, lightweight design, forces, materials, shapes, precision engineering, production/ manufacturing technologies; • Knowledge and experience with mechanical design tools: CATIA, Unigraphics and CAE tooling (e.g. Ansys); • Previous experience with FMEA, DFA and DFM techniques is a pre; • Experience leading a team is desirable.
Our organization: SEGULA Technologies Nederland BV is part of the international SEGULA Technologies Group (7000 employees worldwide, 19 countries). We are the development partner for many OEM companies (automotive, healthcare and high-tech components & systems industry) and involved in highly strategic engineering projects. In the Netherlands we started our activities in 2010 and are located on the High Tech Campus. We combine a professional and informal work atmosphere with a result oriented, driven way of working in which we are of added value to our customers. Our employees tend to have a handson, inquisitive and questioning attitude. People are central in Segula’s philosophy. The variety in projects, markets, customers and countries and the stimulus to innovate, cooperate and share knowledge creates the ideal flora and fauna for a breeding ground where top performers can develop.
Personal profile: • You ask the right questions to gather all the necessary information and to finalize or complete a design; • You have an inquisitive and questioning attitude and excellent interpersonal skills; • You easily accommodate and take actions towards changing assignments/ projects;
Fringe benefits • Average of 25 to 35 holiday days per year • In The Netherlands every employee has the right to 8% yearly holiday money • Almost every company offers pension insurance, most part paid by the employer • When you get ill you’ll most of the time get paid a 100% during your illness
19
• Health insurance costs are average € 100 per month Location: EINDHOVEN. Contact: P. van der Grinten
[email protected] WERKbedrijf Venlo Vacancy number WBS3663613/27-08-2013
RESEARCH SCIENTIST EMBEDDED SYSTEM Eindhoven area Core area: Technical Sciences Level of experience: Junior (0 to 5 years) Working Time: Full-time (32 - 40) ABOUT TNO-ESI The embedded systems research group at TNO (TNO-ESI) is a leading research organization that addresses embedded systems design and engineering at a multidisciplinary level. Its key objective is to raise embedded system design from a craft to a scientifically based engineering discipline. TNO-ESI works for the for global technology leaders with research programs that focus on design of complex high-tech systems and infrastructures. Research programs are tailored to address a variety of application domains, such as microelectronics manufacturing, medical imaging, IC design, high-end printing, the digital home, ambient safety & security and sensor networks. These applications are typically characterized by the large-scale and tightly coupled integration of intelligent components and multidisciplinary enabling technologies. Our success is based on delivering high-impact methods, techniques and tools that increase the rate of innovation of our customers. Please refer to www.esi.nl for further details. YOUR EXPERIENCE AND INTERESTS You have studied Electrical Engineering, Computer Science or Mathematics at university, preferably at PhD level.. You have experience of modeling and analysis techniques used for software development and ideally familiarity with Eclipse, Visual Studio, DSLs or similar. You have a strong belief that working at a higher level of abstraction brings benefits to the whole product creation process for complex systems designs. You are keen to further develop these techniques and to help bring them into mainstream use. You 20
enjoy not only creating models of complex functionality but also demonstrating their value and helping others to adopt the approach THE ROLE You will form part of a small team as part of the Crystal project (CRitical sYSTem engineering Acceleration, a large EU project). Your major role is to; create executable models for the evaluation of performance and behaviour. Your modelling work will focus on the complex control part of an interventional X-ray system and you will have the opportunity to use state of the art tooling in conjunction with tooling being developed as part of the project. During your modelling work it is expected that you will provide critical evaluation of the tooling used to assist other team members responsible for enhancing the functionality and ease of use. Close cooperation with other team members, therefore, is essential. As a member of the Crystal project team you will gain valuable experience working closely with one of the world leaders in the field of high-end medical imaging. NECESSARY PERSONAL CHARACTERISTICS You are highly goal oriented and have a strong drive to deliver quality results. A conceptual thinker, you are able to communicate with other project members and industrial partners above all you are a team player. Gross Salary Average salaries for academic starters range between € 2,700 and € 3,400 gross a month – also depending on education and experience, which comes down to around € 2,100 - € 2,800 net a month. After a Phd you will obtain € 500 extra. Fringe benefits • Average of 25 to 35 holiday days per year • In The Netherlands every employee has the right to 8% yearly holiday money • Almost every company offers pension insurance, most part paid by the employer • When you get ill you’ll most of the time get paid a 100% during your illness • Health insurance costs are average € 100 per month You have studied Electrical Engineering, Computer Science or Mathematics at university, preferably at PhD level.. You have experience of modeling and analysis techniques used for
software development and ideally familiarity with Eclipse, Visual Studio, DSLs or similar. Contact: P. van der Grinten
[email protected] WERKbedrijf Venlo Vacancy number WBS3662513/27-08-2013
Mechanical Engineer A MINIMUM OF 3 YEARS EXPERIENCE IS MANDATORY!! What does Frencken Engineering BV do? Frencken Engineering BV belongs to Frencken Europe BV and is a healthy growing organisation with around 45 employees. Within Frencken Engineering BV, products are developed based on client specifications and an own development roadmap. Characteristic of Frencken Engineering BV is the matrix structure in which the projects are carried out. In the projects, Buyers, Project Managers, System Architects, Mechanical Engineers, System Engineers and Production Engineers work intensively together. The projects begin in the quote phase and end when the product successfully enters production. This among others involves the design of several prototypes and the checking of the production processes with the help of a 0 series. Your role: A Mechanical Engineer elaborates concept solutions fully in 3D models and production drawings. The drafting of FEM analyses to define statistical or dynamic behaviour can form part of this. The product must be efficient to produce in order to keep costs low. Problems that come to the fore in testing with prototypes must be resolved and are processed in the TPD. During the production implementation phase, often a few assembly tools are developed to facilitate the production process. What we ask for from you: • A completed technical high school/higher education Mechanical Engineering course • 3 years' relevant professional experience in hightech mechanical engineering • Considerable experience with 3D modelling and the making of production drawings. (Experience with PLM is a plus) • A flexible and driven attitude • Knowledge of production techniques and cost engineering 21
• Experience with FEM analyses is a plus • A good grasp of the English and German language • Good communication skills and a genuine team spirit. Frencken Engineering offers you: • Fascinating and challenging high-tech projects • Enthusiastic colleagues with a great passion for technology • A good salary and first rate fringe benefits • An informal work atmosphere with short lines of communication • Support and investment in your further development, both professional and personal. Gross Salary Average salaries for academic starters range between € 2,700 and € 3,400 gross a month – also depending on education and experience, which comes down to around € 2,100 - € 2,800 net a month. After a Phd you will obtain € 500 extra. Fringe benefits • Average of 25 to 35 holiday days per year • In The Netherlands every employee has the right to 8% yearly holiday money • Almost every company offers pension insurance, most part paid by the employer • When you get ill you’ll most of the time get paid a 100% during your illness • Health insurance costs are average € 100 per month • In certain cases of unemployment, you can receive government allowance. Location: Eindhoven Demands: • A completed technical high school/higher education Mechanical Engineering course • 3 years' relevant professional experience in high-tech mechanical engineering • Considerable experience with 3D modelling and the making of production drawings. (Experience with PLM is a plus) Contact: P. van der Grinten
[email protected] Vacancy number WBS3660913/27-08-2013
Combustion Engineer Diesel EXPERIENCE WITH DIESEL ENGINES IS MANDATORY!!!!
Xelvin is specialized in engineering and research positions on academic level being a preferred supplier for most leading (international) organizations located throughout the Netherlands. We can help you to find the perfect job with the company that suits you. Xelvin offers you the opportunity to try different working environments, the freedom to expand your existing skills and experience and we want you to enjoy the variety and flexibility of different projects or help in finding the right permanent job. At this moment Xelvin is looking for a: Combustion Engineer, The Netherlands Job Mission The Combustion Engineer is an excellent position for a motivated candidate, with a PhD or Master degree, aiming for a career in a leading international enterprise. You will be challenged with interesting business cases, and high performance that will lead to increased responsibility and career development opportunity’s. In the globally working company we do offer optimal opportunities to contribute in a multicultural team. Job Description - Diesel engine performance development according to future emission regulations and development targets. - Prepare all required process calculations and designs required for upcoming projects. - Prepare project definitive process calculations, drawings and documents where appropriate. - Documentation and evaluation of testing results as well as planning, preparation and supervision of engine tests. - In depth knowledge in the field of thermodynamics, combustion and control engineering. - Collaboration in project teams. - Development of problem solutions and realization of solutions in close cooperation with internal and external development partners. Educational Level - Master or PhD degree (Mechanical Engineering or Physics, specialization in combustion technology, experienced with diesel engine calibration) 22
Personal Skills Meticulous, perseverance, pro active, creative, can manage multiple projects at the same time, very good ability to handle stress and dealing with deadlines, flexible, very good English as well in talking as writing, additional languages are preferred, willing to learn. Gross Salary Average salaries for academic starters range between € 2,700 and € 3,400 gross a month – also depending on education and experience, which comes down to around € 2,100 - € 2,800 net a month. After a Phd you will obtain € 500 extra. Fringe benefits • Average of 25 to 35 holiday days per year • In The Netherlands every employee has the right to 8% yearly holiday money • Almost every company offers pension insurance, most part paid by the employer • When you get ill you’ll most of the time get paid a 100% during your illness • Health insurance costs are average € 100 per month • In certain cases of unemployment, you can receive government allowance. Location: EINDHOVEN. Demands: - Master or PhD degree (Mechanical Engineering or Physics, specialization in combustion technology, experienced with diesel engine calibration) Contact: P. van der Grinten
[email protected] WERKbedrijf Venlo Vacancy number WBS3660413/27-08-2013
Mechanical Engineer As a Mechanical Engineer, you will be responsible for the technical definition and detailing of multidisciplinary projects within the total design and construction of machines together with colleagues within other specialist fields. You will be involved in setting up the requirements and responsible for the development, design, realization and integration of mechanical architecture. Requirements: Our client is looking for well-educated technicians with a Master in Mechanical Engineering who
possess excellent draughtsman skills. As a candidate for this position, you have: - A Bachelor or Master degree (in Mechanical Engineering) with a good academic record - Knowledge of construction principles and analysis methods - At least 3 years experience in mechanical engineering - Knowledge of 3D Cad systems (Solid Works, NX e.a.) - Excellent analytical skills and abstraction ability - Excellent communication skills - Affinity with Mechatronics Location: WEERT. Contact: mr. H Smolders;
[email protected] WERKbedrijf Roermond Vacancy number WBS3624413/23-08-2013
Senior Designer Electronics The Senior Designer Electronics will contribute to the ongoing growth in development and engineering, by contributing to project acquisition, the product architecture and the project execution (with electronics development partners). You are responsible for the design of electronic components and control systems for high-end mechatronic modules. Develop/drive architectural concepts and design, specification of electronic modules and systems and support trade-offs between mechanical, electronic, and software competencies. Specify and outsource specific development and engineering activities to electronics development partners. Maintains a network of best in class electronics development and engineering partners. Lead the electronics designers and engineers in the multidisciplinary project team. Contribute specialist knowledge in one or more electronic engineering fields, such as signal processing, analogue, digital and power electronics, firmware, buses, PCB lay-out, EMI, etc. Support allocation of manufacturing and other supply chain decisions. Document specifications, concepts, and designs, test analysis results. Requirements • Technical University, Master in Electrical Engineering; • 5 to 10 years experience in design of electronic control systems and components for high-end 23
equipment and/or products, in multidisciplinary development teams. Personal Skills • Team player; • Analytical, pragmatic; • Creative; • Good communication skills and proficient in Dutch and English. Location is WEERT. Demands: •Technical University, Master in Electrical Engineering; •5 to 10 years experience in design of electronic control systems and components for high-end equipment and/or products, in multidisciplinary development teams. Personal Skills • Team player; • Analytical, pragmatic; • Creative. Contact: mr. H Smolders,
[email protected] WERKbedrijf Roermond Vacancy number WBS3623513/23-08-2013
Electrical Lay Out System Architect As System Electrical Layout Architect, you will primarily take responsibility for define, document and maintain requirements and roadmaps for the electrical layout infrastructure. Translate the electrical infrastructure requirements from the customer in a product definition together with system Engineering and subsystem project teams. Investigate and write down the requirements of production and service. Concept study and definition of the electrical infrastructure of the products. System level impact analysis of new platforms. Perform trade-off studies to determine the preferred implementation scenario for the realization of the electrical infrastructure. Design and draw a modular electrical 3D concept that meets the requirements of your stakeholders, the international standards on electrical safety and EMC. In addition to the main responsibilities detailed above, you need to demonstrable competency on volume management of all electrical modules of the product in a 3D CAD tool. Making proposals for the best / most effective volume use together with the mechanical 3D architects. Making assessments for future volumes. Organize reviews with System Engineering, mechanical 3D design team, multifunctional projects, production and
service during the study, definition and realization phase. Being accountable for the realization of the maximum reuse of all standardized design building blocks for cables, racks, cabinets and modules. Acting as a "knowledge base" and technical coach for Electrical Layout-, Electrical Construction designers and Electrical Integrator. Requirements • Master's Degree in electrical engineering or similar level acquired by working experience. • At least 2-3 years of relevant work experience in 3D Electrical system design; • At least 4-5 years overall industrial work experience; • Broad technical knowledge on electronics / cabling / mains distribution / electrical safety / diagnose / electronics cooling; • Experience in: any tool related to 3D CAD; • Experience with NX is preferably; • Excellent English language skill in writing and speaking; • Preferably have already some previous experience working with big complex high tech companies or multidisciplinary organization. Personal Skills: • Excellent communication skills. Because of the stakeholder’s management aspect in your role, it is a must that you have excellent communication skills; • High motivated team player; • Accuracy, systematic approach, analytical, problem solving; • Pragmatic attitude; • Leadership (pro-active); • Wide scope on system level and organization level (production and service); • Ability to provide technical direction to a team of designers Demand: •Master's Degree in electrical engineering or similar level acquired by working experience. At least 2-3 years of relevant work experience in 3D Electrical system design; At least 4-5 years overall industrial work experience; Broad technical knowledge on electronics / cabling Contact: mr. H Smolders,
[email protected] WERKbedrijf Roermond Vacancy number WBS3594513/21-08-2013
Digital Designer Electronics In this role you drive the complete development cycle of digital electronics, PCB’s, from architecture definition up to board design, verification and implementation. In product development projects you start with gathering the requirements, and translating these to functionalities and specifications. You come up with a feasible digital design and board layout. You deliver functional overviews, block diagrams and diagrams describing all connections. Moreover you select the components, and together with construction engineers you work on the development of the boards. Thereby you drive the verification and validation process, reviewing the developed boards and ensuring that the requirements are met. Requirements • Academic level of working and thinking, and you have a degree in Electrical Engineering or equivalent Proven experience with digital board design, signal integrity and EMC; • Knowledge of FPGA, VHDL and experience with ASIC designs is a plus; • A proficiency structuring complex problems in a result-driven and decisive manner; • You are willing to work in a multidisciplinary environment; you have a broader interest in digital engineering and other areas of engineering. Personal skills • Pragmatic; • Result-oriented; • Strong communication skills. Location: ROERMOND. Demands: About 5 years relevant work experience; you have successfully designed digital electronics and you are strong in design processes relating to product Contact: mr. H Smolders,
[email protected] WERKbedrijf Roermond Vacancy number WBS3593813/21-08-2013
System Architect Hardware You will be working in a complex electronic environment, including machine control with engines, valves and other actuators are controlled based on set parameters and current sensor
24
information. Such controllers are used in the semiconductor industry, for medical diagnostic equipment and electron microscopes. To perform well in this job you need to bring relevant technical experience. You should be able to define optimal technical solutions together with specialists for the requested problems. In the function of System Architect you’re setting the specifications of whole systems or products. You give reviews and conducts feasibility studies from the customer. In addition gives you technical support to the commercial Department. And you're the leader of internally and externally projects. Requirements • Bachelor or Master degree; • At least 5 years relevant experience; • You have to work well under pressure • You have to be able to give substance to their function independently; • The activities are always performed, especially in-house but possibly also on location at our customers; • Good communication skills are a must for this feature; • Excellent English language skill in writing and speaking. Personal skills • Highly motivated team player; • Good communicator; • Creative negotiator. Location: ROERMOND. Contact: mr. H Smolders
[email protected] WERKbedrijf Roermond Vacancy number WBS3593313/21-08-2013
Mechatronics System Architect As a Mechatronics System Architect in this High Tech company you are responsible to create a technically consistent system design that meets the functional requirements of our customers within the boundaries of overall cost and timing. In close co-operation with colleagues from other disciplines you are translating system specifications and constraints into specifications and roadmaps for architecture, technology, functions and modules, document and maintain these. You will perform trade-off studies to 25
determine the preferred implementation scenario for the realization of one or more of these modules Furthermore you are responsible for: Definition of a generic machine platform, based on modular design. Division of complex system in manageable subtasks. Hardware/Software interface development for ‘own’ and ‘third party’ modules. For a successful commissioning of developed product. Input for development milestone planning. Machine safety. Acting as a technical coach for designers. Requirements Master degree in Mechatronics, Electronics or Mechanics; At least 5 years relevant experience in high tech equipment; Experience with NX or other 3D design tools; Experience with FEM tools and statiscal analyses; Customer oriented; Allround; Eager to define concepts, interfaces, mechatronics architecture; Team player, in the own company and towards consortium partners and suppliers; Likes to help building a company, entrepreneurial spirit; Efficient in dealing with time pressure and budget constraints; Hands-on, helps on the floor during installation / commissioning and in the field with problem analysis / resolution where required. Personal skills • Highly motivated team player; • Good communicator; • Creative negotiator. Location: WEERT. Contact: mr. H Smolders,
[email protected] WERKbedrijf Roermond Vacancy number WBS3592613/21-08-2013
High Tech Design Engineer To contribute to the development of products by designing, creating and testing sub-systems within the restrictions imposed by system specifications, costs and planning considerations. Working on the design of one or more developments or issues, creating designs with a
small team of mechanical experts in project setting. Continuously improving quality of mechanical designs. Working together with the architect(s), lead engineer(s), team lead and (jr) designers, to enable reliable, stable, safe, contamination free, cost effective and easy to manufacture/service systems. Is concerned with the application of precision mechanical construction principles . Realizes the qualification of the design by contributing to the specification of various tests. Designs and realizes test equipment and appliances and is responsible for ensuring that prototypes are built and tests are carried out. Is responsible for the technical product documentation. Requirements BSc or MSc in Mechanical Engineering; At least 2 years of relevant work experience in expertise area Mechanical layout or MSc degree: with at least 1 year of relevant work experience in expertise area Mechanical layout; Specifics for Mechanical Layout: Layout and volume overview/architecture, in view of form-fit and functionality. Statics and kinematics, in view of stability and accuracy required; Experience in precision engineering design of high-tech equipment in a complex technical multidisciplinary environment; Experience with NX and TCE; Experience with FEM tools and statiscal analyses; Knowledge in Design4Manufacturing, Design4Assembly; Excellent communication skills, in view of links to other (sub) disciplines/ sectors and suppliers. Personal skills Highly motivated team player with excellent social, coordination and communication skills; Ability to work in an international multicultural setting; Ability to excel in creative design and flawless execution of precision parts/(sub)modules; Flexible and open mindset, anticipating on a challenging and dynamic environment; Eager to drive his own development. Requirements BSc or MSc in Mechanical Engineering; At least 2 years of relevant work experience in expertise area Mechanical layout or MSc degree: with at least 1 year of relevant work experience in expertise area Mechanical layout; Specifics for Mechanical Layout: Contact: mr. H Smolders,
[email protected] WERKbedrijf Roermond 26
Vacancy number WBS3591413/21-08-2013
System Architect Mechanical Layout Deliver high level mechanical system layout architecture that enables the functionally optimal and cost effective engineering of new systems. Creation and investigation of layout concepts. Discuss with projects and sectors. Come up with well-considered choices, validated against system requirements. Investigate serviceability. Define concepts. Validate against test specifications. Validate concept on high level requirements regarding transportability and install at customer site. Definition of high level volumes and technical interfaces. Monitor that projects stay within agreed volumes. Make use of your creativity and helicopter view to find solutions in case of conflicts. Knowledge transfer to production and other relevant groups. Contribute to system roadmaps. Coaching and training on the job of mechanical engineers in the team. Setting direction in and deployment of the Way of Working (a.o. using Vmodel, PGP process, design reviews). Contribution to the development of a state-of-theart, high-tech measurement system. Challenge to meet performance specifications, quality aspects, time considerations and cost. Come in touch with every engineering process step. Requirements BSc or MSc in Mechanical Engineering At least 3-5 years of experience in creating new machine concepts (or large complex modules). Covering all aspects like layout, serviceability, transportability, install, performance, etc. Basic knowledge of thermal management, statics and dynamics; Experience with NX (or other 3D design tool); Familiar with FEM and related tools Personal skills Technical leadership; Sets out direction for technical project teams; Abstract thinking, out-of-the box thinking; Helicopter view Communication. Effective communication with all levels and disciplines. Clear and structured way of reporting; Networking. Build and maintain networks throughout the organization; Able to challenge others, to come up with even better ideas. Contact: mr. H Smolders,
[email protected]
WERKbedrijf Roermond Vacancy number WBS3590713/21-08-2013
Lead engineer Precision Mechanics Take ownership of one or more developments or issues. Leading a design and/or small team of Mechanical experts in project setting. Is responsible for the design of precision mechanical tools, which are reliable, stable, safe, contamination free, cost effective and easy to manufacture and service. Take lead in running tool developments or issues. Create and execute plan. Clear communication of status and results. Translate performance specifications into tested and released Hardware. Incorporation of externally designed Modules from OEM partners/co-developers. Seeks customers satisfaction and optimal manufacturability and serviceability. Development of Precision Engineering Tooling competences. Requirements • MSc, or Ph.D in mechanical engineering; • At least 5 years of relevant working experience; • Experience in leading project teams in a complex technical environment; • Knowledge of precision engineering, ergonomics, dynamics, mechatronics , thermal and high precision adjustment, position and fixation solutions; • Experience with NX (or other 3D design tool); • Familiar with FEM and related tools. Personal skills • Highly motivated team player with excellent social, coordination and communication skills • MSc, or Ph.D in mechanical engineering; • At least 5 years of relevant working experience; • Experience in leading project teams in a complex technical environment; • Knowledge of precision engineering, ergonomics, dynamics, mechatronics , thermal and high precision adjustment, position and fixation solutions; • Experience with NX (or other 3D design tool); • Familiar with FEM and related tools. Personal skills • Highly motivated team player with excellent social, coordination and communication skills 27
Location: WEERT. Contact: mr. H Smolders;
[email protected] WERKbedrijf Roermond Vacancy number WBS3589713/21-08-2013
Patent Examiners The European Patent Office is looking for 200 Engineers and Scientists. You will work at the cutting edge of technology examining the latest inventions in every technical field in order to protect and to promote innovation in Europe. Your daily work combines scientific expertise with analytical research and an eye for the legal aspects of intellectual property. The main tasks of an examiner are to search and examine patent applications received by the EPO. Patent applications are texts and drawings describing an invention and submitted by individuals or companies seeking legal protection. •The purpose of the search is to find the most relevant previously published technical disclosures ("prior art") against which the patentability of the application can be assessed. •Substantive examination enables the applicant (or authorised representative such as a patent attorney) to be informed of any objections to the grant of a patent, with a view to resolving these through correspondence and, where necessary, oral proceedings. •Examiners may also be involved in opposition proceedings if the patent is contested. The work place is Munich, The Hague or Berlin. Requirements: You have a degree in physics, chemistry, engineering or the natural sciences, a good working knowledge of at least two of the official languages (English, French and German) and the willingness to improve the third. The job of a European patent examiner demands a unique combination of scientific expertise, analytical thinking, language skills and an interest in intellectual property law. Work experience in industry is not essential, but would be an advantage. • Candidates recruited on that basis may be appointed as permanent employees if, no later than three months before expiry of the contract, they demonstrate that they have reached the level
of knowledge of the third language stipulated in the contract. The EPO provides a two-year training programme for newly recruited examiners, combining classroom learning with tutoring by individually assigned coaches. You are willing to move to The Netherlands or to Germany. The European Patent Office offers very good working conditions and relocation support. The salary is min 4200,00 euro and max 8000,00 net, monthly as well as various benefits and allowances. More information about the job you can find on www.epo.org./jobs You can also for more question contact EPO examinators via the internet site. If you are interested in the position you can directly apply via the online application tool: www.epo.org/aboutus/jobs/vacancies/examiners.html Demands: Full university degree in physics, chemistry, engineering or natural sciences. Generally, an excellent knowledge of one official language (Eng, French and German) and the ability to understand the other two. The EPO provides a two-year training programme for newly recruited examiners. Contact: E-Mail
[email protected] WerkgeversServicepunt Holland Rijnland Vacancy number WBS3546513/19-08-2013
Allround body shop without spraying / service engineer All round body shop without spraying / service engineer Your tasks will include performing repairs and repairing damage to cars in the workshop and on site at home and abroad. You are also usable for professional car cleaning, Carstyling as clad windows is a plus. You are a real specialist who is keen on travelling. You have no trouble for a long time to be away from home. In addition, can you make well understood in English and German. If you have real specialist knowledge and skills of stone chip damage and you are a repairman round without spraying, this is a hard requirement. Moreover, you 28
know all of the professional cleanse cars and Car styling such as windows clad your interest. Location: STEENWIJK. Contact: mr. S. Ata van Autobedrijf Ara
[email protected]
WERKbedrijf Regio Zwolle Vacancy number WBS3528013/16-08-2013
Lead engineer E I-flex detachering, located in Rotterdam, is a young and fast growing organization within the group Volker Wessel. The organisation focuses on the implementation, development and engineering of electrical installations, electric drive systems with associated platform automation, including trailing suction hopper dredgers, cutter dredgers, offshore support vessels. But also for applications in mining. You will be working on challenging projects in dedicated teams. The Work As Lead Engineer E you coordinate activities for electrical drive systems for new build dredging-or offshore vessels. As Lead Engineer E you will be responsible for the electrical systems on board the various vessels. You will also be responsible for the electric drives, electric power generation and automation. You will give advice on, in your opinion the best working method and give technical support when needed. You will make the parts lists and related material specifications. You will be the source of information for customers, suppliers and colleagues. You are in consult with the project manager on the progress of the project. What we ask from you - You have a college education HBO-electrical engineering or equivalent by experience. - You have several years of experience in a similar function. - You have a broad technical knowledge of generators, switchboards and inverters. - You have experience with dredging and/or offshore industry. - You master the Dutch and English language excellent, written and spoken.
- You have knowledge of safety and quality standards and inspection services. - You like working in a team in a goal-getting setting. - You are venturous and willing to work in a growing organization.
- Process Control Engineers - Commissioning Engineers - Logistic Engineers - Principal Hull & Marine Engineers - Offshore Structures Engineers - Discipline Engineers
What we offer you - We offer you a challenging job on the highest level of technology. - You will be working in an organization that is in development. - We offer you a workplace where your skills and talents are valued and where you get room for further developments. - Our working conditions are excellent.
For our most recent positions please check our website at www.orionjobs.com For all positions the requirements are:
Interested? Do you recognize yourself in the description? Are you interested? Then apply for the job by sending an e mail with your CV and covering letter to
[email protected]
Mr. E.W.C.F. Zaal at:
[email protected] WERKbedrijf Dordrecht Vacancy number WBS3399413/07-08-2013
Ms. P van Wijk van I Flex Detachering B.V.
[email protected] WERKbedrijf Dordrecht Vacancy number WBS3488813/14-08-2013
Engineers ORION ENGINEERING GROUP is always looking for engineers willing to work in an international environment. For our clients, working in the Oil & Gas Industry and On- Offshore Industry we are looking for experienced engineers for their international positions. Amongst others we are looking for: - Mechanical Engineers - Technical Authors - Process Engineers - Technical Safety Engieers - Drilling Supervisors - QA-QC Engineers - HSE Engineers - Operators - Project Managers - etc. - Well Engineers - Directional Drilling Engineers - Materials and Corrosion Engineers - Rotating Equipment Engineers 29
AT LEAST 2 YEARS EXPERIENCE IN THE FIELD OF YOUR APPLICATION AND YOU ARE GRADUATED IN THAT FIELD. Candidates can contact:
Wall and ceiling fitters Vacancy: Wall and ceiling fitters (male/female) for Stutt Groep in Belgium and the Netherlands We are looking for experienced wall and ceiling fitters for long-term projects in Belgium, the Netherlands, and Germany. Description of work: The ceiling fitters primarily build modular ceilings and also modular walls. The work takes place in the finishing phase of new build or renovation projects. The fitters mostly work in groups of two or three people. Preparatory work includes clearing the floor, transporting the required materials, drilling, and fitting wall plugs and ceiling hangers. The system is then fitted. This involves the ceiling hangers being height-adjusted and the main profile and intermediate profiles being made and suspended as required. After this, the sheets or segments are tailor-made, put in place, and attached. Finally, the workplace is tidied up and the waste disposed of. The work takes place concurrently with other installation and/or finishing work. Job requirements: - Demonstrable work experience as a wall and ceiling fitter in the finishing phase (min. five years) - Valid ‘B’ driver’s licence and own vehicle
- A valid basic safety certificate (VCA - may be obtained through the Stutt Groep based on performance) - A valid passport or ID card - Own tools such as; battery-powered drill, cable drum, small ladder, spirit level, and tin snips - Command of German and/or English preferred Current projects: We are currently working on various projects in Belgium and the Netherlands. The projects range from hospitals and shop interiors to home-building and private construction work. Salary indication: Salaries are in line with market rates and are based on gross earnings. Gross salaries range from €1500 to €2200 per month, in accordance with the NBBU collective labour agreement. Benefits: Accommodation in the Netherlands and/or Belgium will be arranged by Stutt Groep. We have various apartments, chalets, bungalows, and B&Bs at our disposal. Stutt Groep will apply for and pay for the necessary healthcare insurance. Any safety certificates which are compulsory in the Netherlands will be reimbursed by Stutt Groep, based on performance. Arrival: When you arrive in the Netherlands, you will always be personally welcomed by our own staff. We will support you in the process of applying for a social insurance number, explain the employment contract and employment conditions, and answer any questions you may have to the best of our ability. Overige eisen: - a valid basic safety certificate (VCA - may be obtained through Stutt Groep based on performance) -work experience as a wall and ceiling fitter in the finishing phase (min. five years)- tools Own tools such as; battery-powered drill, cable drum, small ladder, spirit level, and tin snips. Contact: P. van der Grinten:
[email protected] WERKbedrijf Venlo Vacancy number WBS3080313/12-07-2013
Oven-builders An oven-builder specializes in bricklaying and repairs for industrial ovens/kilns. Disassembling and installing refractory linings/refractory insulating linings in various industrial and semi-industrial installations - Installing (setting out) heat-resistant anchors,anchor systems Demand: - a valid basic safety certificate (VCA may be obtained through Stutt Groep based on performance) -Experience of installing refractory linings/refractory insulating linings in various types of industrial and semi-industrial installations - tools Contact: P. van der Grinten:
[email protected] tel: 077-7001894 WERKbedrijf Venlo Vacancy number WBS3080113/12-07-2013
Bricklayers Bricklayers (male/female) in Belgium and the Netherlands for Stutt Groep For long-term projects in Belgium and the Netherlands, we are looking for experienced bricklayers. General description: Our clients specialize in bricklaying, scaffolding, and bonding work in house-building and utility construction, both commercial and private. The activities consist of: * Traditional bricklaying * Bonding calcium silicate blocks/elements * Pointing * Façade bonding work Job requirements: - a valid basic safety certificate (VCA - may be obtained through Stutt Groep based on performance) - a valid passport or ID card - a valid ‘B’ driver’s licence and own vehicle - own tools Work locations: The work is carried out on location in Belgium and the Netherlands. Our client works for private individuals, housing associations, and businesses. Salary indication:
30
Salaries are in line with market rates and are based on gross earnings. Gross salaries range from €1500 to €2200 per month, in accordance with the NBBU collective labour agreement. Benefits: Accommodation in the Netherlands and/or Belgium will be organized by Stutt Groep. We have various apartments, chalets, bungalows, and B&Bs at our disposal. Stutt Groep will apply for and pay for the necessary healthcare insurance. Any safety certificates which are compulsory in the Netherlands will be reimbursed by Stutt Groep, based on performance. Arrival: Upon arrival in the Netherlands, you will be personally welcomed by members of our own staff. We will support you in the process of applying for a social insurance number, explain the employment contract and employment conditions to you, and answer any questions you may have to the best of our ability. Demands: - a valid basic safety certificate (VCA may be obtained through Stutt Groep based on performance) - a valid passport or ID card - a valid ‘B’ driver’s licence and own vehicle - own tools Contact: P. van der Grinten:
[email protected] WERKbedrijf Venlo Vacancy number WBS3079913/12-07-2013
Façade Plasterers Vacancy: Façade Plasterers (male/female) in Belgium for Stutt Groep There is a great variety of finishes used for outdoor façades; a textured wall coating may be used as a finishing layer, but rendering is also possible. As such, our client has very broad experience in this field. Our client has already successfully completed a wide range of projects, large and small in scale. Façade plastering is carried out for insulation purposes. Description of work: As a plasterer, you work in teams of between three and six people. You are responsible for the entire process of façade plastering from start to finish. You are good at working in a team but you can also work very well independently. You may work in the homes of private individuals or on a project basis. 31
Job requirements: - Demonstrable work experience as a façade plasterer - A valid passport or ID card - A valid basic safety certificate (VCA - may be obtained through the Stutt Groep based on performance) - A valid ‘B’ driver’s licence and own vehicle - Command of German and/or English preferred - Tools Salaries are in line with market rates and are based on gross earnings. Gross salaries range from €1500 to €2200 per month, in accordance with the NBBU collective labour agreement. Benefits: Accommodation in Belgium will be organized by Stutt Groep. We have various apartments, chalets, bungalows, and B&Bs at our disposal. Stutt Groep will apply for and pay for the necessary healthcare insurance. Any safety certificates which are compulsory in the Netherlands will be reimbursed by Stutt Groep based on performance. Arrival: Upon arrival in the Netherlands, you will be personally welcomed by members of our own staff. We will support you in the process of applying for a social insurance number, explain the employment contract and employment conditions to you, and answer any questions you may have to the best of our ability. Demands: -Demonstrable work experience as a façade plasterer -A valid basic safety certificate (VCA - may be obtained through the Stutt Groep based on performance) - Own tools Contact: P. van der Grinten:
[email protected] Vacancy number WBS3079813/12-07-2013
Shutterers We are looking for experienced shutterers for longterm projects in Belgium and the Netherlands. Description of work: As a civil shutterer, you specialize in making shuttering for concrete structures for housebuilding, hydraulic works, and/or the construction of concrete infrastructure (bridges, viaducts, tunnels, and multi-storey/underground car parks).
The projects in question are long term in nature. The most important activities are: building all kinds and types of shuttering, handling poured concrete, removing shuttering and finishing, and placing elements. Job requirements: - Demonstrable work experience as a shutterer - Valid ‘B’ driver’s licence and own vehicle - A valid passport or ID card - A valid basic safety certificate (VCA - may be obtained through the Stutt Groep based on performance) is an advantage - Own tools - You are able to read drawings and work both independently and in a team - Command of German and/or English preferred Salaries are in line with market rates and are based on gross earnings. Gross salaries range from €1500 to €2200 per month, in accordance with the NBBU collective labour agreement. Benefits: Accommodation in the Netherlands and/or Belgium will be arranged by Stutt Groep. We have various apartments, chalets, bungalows, and B&Bs at our disposal. Stutt Groep will apply for and pay for the necessary healthcare insurance. Any safety certificates which are compulsory in the Netherlands will be reimbursed by Stutt Groep based on performance. Arrival: Upon arrival in the Netherlands, you will be personally welcomed by members of our own staff. We will support you in the process of applying for a social insurance number, explain the employment contract and employment conditions to you, and answer any questions you may have to the best of our ability. Demands: - work experience as a shutterer -Valid ‘B’ driver’s licence and own vehicle -A valid basic safety certificate (VCA - may be obtained through the Stutt Groep based on performance) is an advantage -Own tools -- You are able to read drawings and work both independently and in a team Contact: P. van der Grinten :
[email protected] WERKbedrijf Venlo Vacancy number WBS3079313/12-07-2013
32
Welder In all positions from the hand mow seam connections of carbon weld of all types, r.v.s. (=stainless steel) – and alloy material according to the applying Certification Standards. The welder must be able a qualitatively good make mow connection under all circumstances. He must be able master of the mow processes mentioned below there minimum three entirely: • Electric welding (SMAW) carbon steel80-500 • Argon welding (GTAW) Carbon steel 0-80-500 • Argon welding (GTAW) stainless steel 0-80 • Argon welding (GTAW) stainless steel 80-500 • CO2 welding (GMAW) solid wire • CO2 welding (FCAW) cored wire Job discription * LBO level * In possession of valid welding certificates for CS / SS and/or Alloy * Security Certificates (SCC-1) Region The whole Netherlands, Especially the Botlek-Europoort area, Moerdijk and Vlissingen Contactinformatie : mr. R Wolvers E-Mail
[email protected] WERKbedrijf Dordrecht Vacancy number WBS2876512/02-07-2012
Assembly worker/ Flange fitter Independent composing, assembling and dismantling pipelines, control parts, appendages and constructions on/at simple process installations. On indication make of simple construction components and helpful is at he activities. In attentive cases assist of the piping engineer at composing control parts. Function requirements Craftsmanship level In the possession of the certificate flange fitter Security certificate (VCA-1) Region:The whole Netherlands, Especially the Botlek-Europoort area, Moerdijk and Vlissingen
Contact: dhr. R Wolvers E-Mail
[email protected] I Flex Detachering B.V. WERKbedrijf Dordrecht Vacancy number WBS2876112/02-07-2012
Pipe engineer (construction) According to complicated drawing independently produce according totesting requirements op pipe and control parts (Ferro, non-Ferro). According to drawing break out, outline, or according to itself-manufactured times, gauges or complicates isometrische sketches ( after inmate) warmly and cold bend in all forms. The spanni to dismantle and assembling pipelines, control parts, appendages and apparatuss, possible on al to kolonnes, kettles, condensers, turbines, pumps, compressors, etc. Also control of the invoked material( quantity and quality. Implementation of the activities the toleration put within. Function requirements: * Craftsmanship level, Bemetel or perceptible experience * Preferable in the possession of the certificate flange fitter * Can work independently * Security certificate (VCZ-1) Region: The whole Netherlands, especially the. Botlek-Europoort area ,Moerdijk and Vlissingen Contact: dhr. R Wolvers E-Mail
[email protected] van I Flex Detachering B.V. WERKbedrijf Dordrecht Vacancy number WBS2875912/02-07-2012
Machinefitter Independent placing rotating and fine aligns equipment, the grof of this equipment, connecting the required control work, dismantling and assembling internals of clinchers and securities, and to that the implementation of versions, such as sharpens and rags of meetings etc. The whole Netherlands, especially: BotlekEuropoort Area, Moerdijk, Rotterdam and Vlissingen 33
* Level, Bementel or perceptible experience * Preferably in the possession of the certificate flange fitter * Security certificate (VCA-1) Contact: dhr. R Wolvers E-Mail
[email protected] WERKbedrijf Dordrecht Vacancy number WBS2875612/02-07-2012
Engineer / Monteur / Electrotechnic The company deals with computer-controlled forklift trucks, transport truck, transport belts, robots, and packaging machines. Requirements: The person will be responsible for installation of mechanical, electrical, electrotechnic components. -knowledge of computer controlled machinery -maintenance and time scheduled checks -fix of machinery, electrical, electrotechnics devices -montage of new installation Requirements: -Bachelor or higher electrotechnics or mechanical engineering education/experience -skill assembly of mechanical, electrical, electronic devices -skills to mount PLC and other electric/electrical devices according to drawing. -good knowledge of Nederland’s or English or German language -independent work -customer orientations, teamwork Localization: Arnhem, Nijmegen salary: €. 2.000 – 3.000 gross, dependent on experience, education and languages. The candidate gets from Customer car, laptop and possibility to work in home. -Bachelor or higher electrotechnics or mechanical engineering education/experience -skill assembly of mechanical, electrical, electronic devices -skills to mount PLC and other electric/electrical devices according to drawing. Geïnteresseerd? P. van der Grinten
[email protected] WERKbedrijf Venlo Vacancy number WBS2744613/20-06-2013
OPERATING ROOM ASSISTANTS Job description OR- assistants: The RN specializing in Perioperative Nursing practice performs nursing activities in the preoperative, intraoperative, and postoperative phases of the patients' surgical experience. Under the general supervision of the Staff Physician, the operating room assistant is a member of the Surgical team and provides patient services based on the Standards and Recommended Practices for Perioperative Nursing. The operating room nurse provides a continuity of care throughout the perioperative period, using scientific and behavioral practices with the eventual goal of meeting the individual needs of the patient undergoing surgical intervention. This process is dynamic and continuous, and requires constant reevaluation of individual nursing practice in the operating room. Requirements: Degree for OR assistant. Minimum working experience of 5 years. Robotic experience is an advantage. Current CPR certification required. Minimum Dutch language skills: level B2. If you do not have the necessary language skills we will provide a Dutch language course for a period of 1 year. Are you a healthcare professional seeking for a new opportunity? Please send your resume to:
[email protected] Contact: mr. Erdal egin,
[email protected] WERKbedrijf Alkmaar Vacancy number WBS2605013/11-06-2013
NURSES Job description for nurses: Utilizes the nursing process to ensure quality patient care is provided throughout the episode of care. Provides a therapeutic environment through safe, accurate, and timely medication and IV administration. Communicates to the team, co-workers, patients, and family members and evaluates understanding of informational manner. Ensures complete, accurate, and timely written communication of patient information. 34
Requirements: Bachelor of Science (BSN) in nursing. Minimum working experience of 4 years. Minimum Dutch language skills: level B2. If you do not have the necessary language skills we will provide a Dutch language course for a period of 1 year. Are you a healthcare professional seeking for a new opportunity? Please send your resume to:
[email protected] WERKbedrijf Alkmaar Vacancy number WBS2604813/11-06-2013
Control System Engineer 5 years exp Control System Engineer MSc/Bachelor At least 5 years experience! Work location: The Netherlands, Rotterdam Area Xelvin is specialized in helping enterprising engineers to find a job in the Netherlands: Bachelors, Masters and Academics with their enthusiasm, flexibility and professionalism really make a difference, in any business. Our technicians are accustomed quickly to an organization to adapt, add value and be productive. Therefore Xelvin the preferred supplier for most major national and international organizations in the Netherlands. Client: Our Client is a globally operating company with extensive experience in the design and manufacturing of heavy construction equipment for world's leading on and offshore companies. Founded in 1929 and originally a steel construction company - They joined forces with a engineering company in 1987 to develop products entirely under own management, from concept to installation. There product range can be subdivided into six main categories: Cranes, Drilling Equipment, Pipelay Equipment, Winches, Vessel Designs and Specials and varies from stand-alone components to highly engineered integrated systems. Job description: Design of complex control systems according to order specifications and our design standards.
Selecting the hardware in collaboration with engineers of other disciplines. Developing test environments for testing the software Assisting the department After-sales and Service with problems that arise while using the product. Carrying out checks on software products of other control systems engineers Control and approve the project budget Training and coaching Junior Control System Engineers Requirements: You have an Academic degree in Mechanical Engineering, Electrical Engineering or similar. You have knowledge of PLC and SCADA and affinity with the afore-mentioned professional fields. Experience with C/C ++ programming is a recommendation. Relevant work experience, at least 5 years, is a must. You should have a practical disposition, and since our installations need to be put into operation both in the Netherlands and abroad, travelling should not be a problem. Contact: Maikel Meijers
[email protected] www.xelvin.nl WERKbedrijf Venlo Vacancy number WBS2558413/10-06-2013
Project Engineer Offshore The Project Engineer is responsible for overseeing the engineering process and to lead project teams with calculations and the development of methods and procedures for installing, removing and transporting off offshore constructions. Together with the Project Manager the Project Demands: Minimum Bachelor (HTS) / Master level (Civil Engineering, Offshore Engineering, Aerospace Engineering or Mechanical Engineering or equivalent). Minimum of 3 years working experience in a project related environment. Experience with installing offshore constructions is a big plus, but not mandatory Location: ZOETERMEER. Contact: P. van der Grinten
[email protected] WERKbedrijf Venlo Vacancy number WBS2109013/13-05-2013
35
Product development Engineer For a high tech international company based in Holland, Amsterdam we are looking for A Product Development engineer MEMS! Product development Engineer • Electrical Engineering, Applied Physics, Mechanical Engineering • PhD or MSc • At least 2-5 yrs experience in design and/or process of MEMS-microphones or MEMS sensor or actuators • (Lead) Engineer • Experience with working with external companies/waferfabs • Should be efficient and work independently quite fat • We are looking for candidates with relevant knowledge and expertise in the field of (Applied) Physics, Mechanics or Electronics, preferably on a Msc. Level. • Preferably you have some years of relevant working experience and you are prepared to travel once in a while. Candidates who just graduated are more than welcome to apply as well! (mechanical engineering, precision engineering, acoustics, mechanical, Microelectronics, electronics, mechatronica…) Salary between € 2300- 3500 Demands: Relevant knowledge and expertise in the field of (Applied) Physics, Mechanics or Electronics, preferably on a Msc. Level. Graduates are more than welcome to apply as well! (mechanical engineering, precision engineering, acoustics, mechanical, Microelectronics, electronics, mechatronica Contact: dhr. R. van Til,
[email protected] van Van Til Recruitment WERKbedrijf Noordkop Vacancy number WBS2080813/07-05-2013
INDUSTRIAL MECHANIC (French) Mivisa is currently Spain´s leading manufacturer of tinplate cans for food products. With 8 factories spread over Europe, our mission is to provide our product range on the market to cover the full spectrum of tinplate canning needs
and focus on excellence in customer service, quality, production capacity and innovation. From our factory in Horst we serve our customers in The Netherlands, Belgium, Germany and France. Because of the growth of our organisation, Mivisa Benelux B.V. is looking for a: INDUSTRIAL MECHANIC We are looking for candidates with an affinity for our industry and who are willing to help our company grow. Function description: As a Mechanic, your main task is to keep the production lines in a good technical condition. This includes all machines, transportation systems and peripherals. You are constantly working on the improvement of the quality and the quantity of the production. After an internal training program, you perform independently the final checks on the functioning of the machines. When the production lines are not running, you will give preventive maintenance, do repairs and revisions from the front-end to the back-end of the production lines. To keep the high quality of our product, you will perform adjustments of allocated machines according to the technical requirements. You are responsible for the proper administration of the production data and any product defects. Function requirements: Your English is understandable. You are accurate, able to perform well under pressure and you have a good sense of responsibility. You have a flexible attitude and are willing to work in 3 shifts, weekends and holidays if necessary. You have (at least 2 years) experience in maintenance of industrial production machinery and you understand the importance of quality and safety. You are able to switch easily between different tasks in different machines. Mivisa offers: A challenging and diverse work environment A shift allowance of 14%, extra hours paid according to the ¨CAO Metaal & Techniek¨ (A minimum of) 38 hours per week guaranteed Internal career opportunities demands: You have (at least 2 years) experience in maintenance of industrial production machinery 36
and you understand the importance of quality and safety. You are able to switch easily between different tasks in different machines. Contact: mr. R Vasquez Ribelles E-Mail
[email protected] van Professional Recruitment Agency Netherlands WERKbedrijf Venlo Vacancy number WBS1917813/25-04-2013
Mechanical Engineer Philips works for people. The aim of the organizations products is to improve the quality of life of the consumers. Three divisions each have their own targeting group and associated products. Philips Healthcare aims to develop equipment for healthcare professionals, Philips Lighting is active in developing new solutions in ways of lighting and Philips Consumer Lifestyle accommodates the consumer market of personal wellbeing and associated products. In the quest for technical professionals, Philips and the Randstad Holding cooperate closely together. Being the biggest player in the World of Work, Randstad has existed for more than half a century. Our three brands, Yacht, Tempo-Team and Randstad collaborate intensively to fulfill Philips’ employment needs. Within the Research-division, Philips is looking for several mechanical engineers. Mechanical engineering at Philips is all about pushing boundaries. This is not ‘copy-and-paste' engineering. You need to be able to innovate. You will make use of everything you learned at university and more, to create new solutions on time and within budget. You will work within multidisciplinary teams, and have plenty of opportunity to learn from highly skilled colleagues. In this, you will accomplish the seemingly impossible every day. An example: Philips Research is somewhat like a commercial university. One moment you are developing new techniques for an MRI-machine for Philips Healthcare, the next you may be active in improving Philips’ own production lines at Lighting. Next to innovation for the internal organization, Philips Research also handles assignments for
external parties like ASML or NXP. Consequently you will always be able to develop and grow. Function requirements Bachelors or Masters in Mechanics or similar. For this vacancy we look for candidates with and without professional experience. Experience in working with pro-Engineer is however a must. You should be able to make several calculations by hand, such as stiffness or strength. Next to the hard requirements, the perfect Mechanical Engineer is also proactive, pragmatic and analytical. Location: EINDHOVEN. Contact: P. van der Grinten
[email protected] WERKbedrijf Venlo Vacancy number WBS1911613/25-04-2013
Electronical Engineer Philips works for people. The aim of the organizations products is to improve the quality of life of the consumers. Three divisions each have their own targeting group and associated products. Philips Healthcare aims to develop equipment for healthcare professionals, Philips Lighting is active in developing new solutions in ways of lighting and Philips Consumer Lifestyle accommodates the consumer market of personal wellbeing and associated products. In the quest for technical professionals, Philips and the Randstad Holding cooperate closely together. Being the biggest player in the World of Work, Randstad has existed for more than half a century. Our three brands, Yacht, Tempo-Team and Randstad collaborate intensively to fulfill Philips’ employment needs. Within Philips there are several positions to be held as an Electronical Engineer. An example of one of the positions is that of Test Engineer at Philips Healthcare. The key purpose of this function is to test clinical applications. These clinical applications are used for interventional procedures in cardiological, vascular and oncological domains. As Test Engineer the key elements of your function are amongst others: - Defining, planning and executing test cases 37
- Analyzing, interpret and report results - Contributing to the departments process improvements Function requirements Bachelors degree, held in Electronics or directly related area. You have several years of testexperience in a high-tech environment. You have a basic understanding of software development. ISEB/ISTQB Foundation level knowledge of test Engineering profession is a must. Having knowledge of the medical domain is considered an advantage. Next to the hard requirements, the perfect Electronical Engineer is also flexible, quality-driven and communicative.. Contact: P. van der Grinten :
[email protected] WERKbedrijf Venlo Vacancy number WBS1911413/25-04-2013
Physics Engineer Philips works for people. The aim of the organizations products is to improve the quality of life of the consumers. Three divisions each have their own targeting group and associated products. Philips Healthcare aims to develop equipment for healthcare professionals, Philips Lighting is active in developing new solutions in ways of lighting and Philips Consumer Lifestyle accommodates the consumer market of personal wellbeing and associated products. In the quest for technical professionals, Philips and the Randstad Holding cooperate closely together. Being the biggest player in the World of Work, Randstad has existed for more than half a century. Our three brands, Yacht, Tempo-Team and Randstad collaborate intensively to fulfill Philips’ employment needs. As an engineer in physics Philips will be your true Eureka! There are several functions to be held in the full bandwidth of the physical ambit. An example of one of these possibilities is the function of Experimental Multiphysicist. This function is positioned at Philips Research R&D. In this department the experimental research is carried out on which the rest of Philips relies. The nature of the projects can be broad and may cover a large part of the development chain, starting with
technical feasibility up to testing of multiphysical phenomena. Your role in this team is to contribute your expertise to several of these projects. You do this by designing, setting up and carrying out multiphysical analysis experiments. You cooperate in a multidisciplinary team together with modeling experts, other experimentalists and specialists from a specific field. Function requirements You have a background in physics, as a bachelor or master. Your field of play is experimental physics, in particular fluid mechanics and electromagnetism. Hands-on experience is needed, including the ability and creativity to design and build experimental set-ups. Next to the hard requirements, the perfect Physics Engineer is pro-active, result-driven and able to work in a divers team. Location: EINDHOVEN. Contact: mr. Peter van der Grinten: peter.vandergrinten @uwv.nl WERKbedrijf Venlo Vacancy number WBS1910913/25-04-2013
Company Websites in English
Depooter http://www.depooter.nl/ Pran http://www.pran.nl/ Styron http://www.styron.com/ Viro http://www.viro.nl/index.php?lang=en Xelvin http://www.xelvin.com/?culture=en
Links with Europe Vacancies, Eures advisers and lots of information.: http://ec.europa.eu/eures/ Euraxess : http://ec.europa.eu/euraxess/ Work for the EU: http://werkenbijdeeu.nl/ / http://europa.eu/epso/ Your diploma abroard: http://www.enic-naric.net Resume: www.europass.nl Information about the living, working, taxation, healthcare etc.: www.europa.eu/youreurope/ Social security in the Netherlands: www.government.nl/international
Career result http://www.careerresult.nl/index.php/CurrentLangu age/3
Your first EURES Job: http://ec.europa.eu/social/main.jsp?catId=993&lan gId=en Solvit handles problems with a cross-border element that are due to bad application of EU law by public authorities within the EU member states http://ec.europa.eu/solvit European Trade Union Confederation, ETUC, http://www.etuc.org/
E European Patent Office http://www.epo.org/
Colofon:
Aerotek http://www.aerotek.nl/
J JVR Consult http://www.jvrconsult.nl/?siteid=2 KP&T http://www.kpt.nl/internationaltalent Ocre http://www.ocre-groep.nl/ 38
This paper was prepared by: Pieter van der Valk EURES Adviser M +31621171395 E
[email protected] www.werk.nl www.eures.europa.eu www.verdwaalnietopinternet.nl
39