International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
1
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Academia Scientific Meeting
International Congress of the New Approaches and Technologies for Sustainable Development
September 21-24, 2017
Isparta / TURKEY
2
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Honor Committee Prof. Dr. İlker Hüseyin ÇARIKÇI
Süleyman Demirel University Rector
Prof. Dr. Murat Ali DULUPÇU
Süleyman Demirel University Vice Rector
Prof. Dr. Sedat AKTAN
Süleyman Demirel University Vice Rector
Prof. Dr. Mehmet SALTAN
Süleyman Demirel University Vice Rector
Prof. Dr. Nihat AYYILDIZ
Süleyman Demirel University Vice Rector
Asst. Prof. Dr. Vahdettin AYDIN
Süleyman Demirel University Secretary-General
Congress Chairman Prof. Dr. Recep KÜLCÜ
Süleyman Demirel University, KAKAD
Assoc. Prof. Dr. Nilüfer NEGİZ
Süleyman Demirel University
Assoc. Prof. Dr. Nuri ÖMÜRBEK
Süleyman Demirel University
Organizing Committee PhD. Aylin Zeren ALAGÖZ
Boğaziçi University, KAKAD
PhD. Nazlı Ceyla ANADOLU KILIÇ
Süleyman Demirel University
Teaching Asst. İbrahim GENÇ
Süleyman Demirel University
Teaching Asst. İsmail İlke KÖSE
Süleyman Demirel University
Expert Erhan ÖZKAN
Süleyman Demirel University
Expert Oğuz ÖZTÜRK
Süleyman Demirel University
Ahmet SÜSLÜ
Süleyman Demirel University
Cihannur CİHANALP
Süleyman Demirel University
Ekin YURDAKUL
Boğaziçi University, KAKAD
Fatıma ÇELİK
Boğaziçi University, KAKAD
Scientific Committee Prof. Dr. Ali Kemal YAKUT
Süleyman Demirel University, Turkey
Prof. Dr. Arif Emre ÖZGÜR
Süleyman Demirel University, Turkey
Prof. Dr. Arzu ŞENCAN ŞAHİN
Süleyman Demirel University, Turkey
Prof. Dr. Ayşe FİLİBELİ
Dokuz Eylül University, KAKAD, Turkey
Prof. Dr. Can ERTEKİN
Akdeniz University, Turkey
Prof. Dr. Dilek SANİN
METU, KAKAD, Turkey
Prof. Dr. Gökhan ORHAN
Bandırma Onyedi Eylül University, Turkey
Prof. Dr. Günay KOCASOY
Boğaziçi University, KAKAD, Turkey
Prof. Dr. Hüseyin GÜL
Süleyman Demirel University, Turkey
i
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Prof. Dr. Irena ZEMAITAITYTE
Mykolas Romeris University, Lithuanian
Prof. Dr. İsa İPÇİOĞLU
Şeyh Edebali University, Turkey
Prof. PhD. John GATHEGI
South Florida University, USA
Prof. Dr. Leta DROMANTIENE
Mykolas Romeris University, Lithuanian
Prof. Dr. Mehmet ÖZHANLI
Süleyman Demirel University, Turkey
Prof. Dr. Nevzat ÇEVİK
Akdeniz University, Turkey
Prof. Dr. Nuray BALKIS
İstanbul Universiy, KAKAD, Turkey
Prof. Dr. Nuri AZBAR
Ege Universtiy, KAKAD, Turkey
Prof. Dr. Osman YALDIZ
Akdeniz University, Turkey
Prof. Dr. Özgür KÜLCÜ
Hacettepe University, Turkey
Prof. Dr. Recep KÜLCÜ
Süleyman Demirel University, Turkey
Prof. Dr. Reşat SELBAŞ
Süleyman Demirel University, Turkey
Prof. Dr. Songül SALLAN GÜL
Süleyman Demirel University, Turkey
Prof. PhD. Eng. Sorin BIRIS
Univeristy of Politehnica Bucharest, Romania
Prof. Dr. Şahin FİLİZ
Akdeniz University, Turkey
Assoc. Prof. Dr. Ahmet KABUL
Süleyman Demirel University, Turkey
Assoc. Prof. Dr. Ahmet MUTLU
Ondokuz Mayıs University, Turkey
Assoc. Prof. Dr. B. SALUNKHE
Center of Botany, INDIA, India
Assoc. Prof. Deniz YILMAZ
Süleyman Demirel University, Turkey
Assoc. Prof. Dr. H. Eylem KAYA
Süleyman Demirel University, Turkey
Assoc. Prof. Dr. Hilmi Cenk BAYRAKÇI Süleyman Demirel University, Turkey Assoc. Professor Dr. Hrvoje STANCIC
University of Zagreb, Croatia
Assoc. Prof. Dr. Ionut Virgil ŞERBAN
University of Craiova, Romania
Assoc. Prof. Dr. İsmail TOSUN
Süleyman Demirel University, Turkey
Assoc. Prof. Dr. Mehmet KAŞKA
Süleyman Demirel University, Turkey
Assoc. Prof. Dr. Murat FIRAT
Süleyman Demirel University, Turkey
Assoc. Prof. Dr. Nilüfer NEGİZ
Süleyman Demirel University, Turkey
Assoc. Prof. Dr. Nuri ÖMÜRBEK
Süleyman Demirel University, Turkey
Assoc. Prof. Dr. Ümit AKCA
Süleyman Demirel University, Turkey
Asst. Prof. Dr. Ahmet ÖZSOY
Süleyman Demirel University, Turkey
Asst. Prof. Dr. Cristina ILLIE
University of Craiova, Romania
Asst. Prof. Dr. M. Ziya YAKUT
Süleyman Demirel University, Turkey
PhD. Eng. Mihai MATACHE
INMA Bucharest, Romania
ii
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
PhD. Eng. Valentin VLADUT
INMA Bucharest, Romania
PhD. Tolga ÇAKMAK
Hacettepe University, Turkey
Res. Asst. Şahika EROĞLU
Hacettepe University, Turkey
Congress Secretary Asst. Prof. Dr. Ömer ERDOĞAN Süleyman Demirel University
iii
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
CONTENTS Knowledge Sources and Cooperation Networks of Kiwi Growers in Samsun Province of Çarşamba District, Turkey.............................................................................................. 38 Sürdürülebilir Sosyal Kalkınmada Güncel Bir Tartışma: Çocuğa Yönelik Cinsel İstismarı Yeniden Düşünmek ......................................................................................... 39 A Current Discussion on Sustainable Social Development: Rethinking the Sexual Abuse Against Children ............................................................................................................. 40 Yeni Yoksulluk Konsepti İçin Sürdürülebilir Sosyal Politika Önlem ve Öncelikleri .... 41 Sustainable Social Policy Measures and Priorities for New Concept of Poverty .......... 42 Milli Park Sınırları İçinde Yaşamak: Kovada Gölü Ve Kızıldağ Milli Parkları Örneği 43 Living In National Park Borders: Examples Of Kovada Lake And Kızıldag National Parks ............................................................................................................................... 44 Ziyaretçilerin Milli Parklara Yönelik Yaklaşımlarının Faktör Analizi Lıvıng In Natıonal Park Borders: Examples Of Kovada Lake And Kızıldag Natıonal Parks ...................... 45 An Integrated AHP-GRA Approach For Green Car Selection Problem ........................ 46 Yeşil Sipariş Belirleme Problemi için MACBETH ve Bulanık Çok Amaçlı Doğrusal Programlama Tabanlı Bütünleşik Bir Yaklaşım ............................................................. 47 An Integrated Approach based on MACBETH and Fuzzy Multi-objective Linear Programming for Green Order Allocation Problem ....................................................... 48 Neme Duyarlı Güneş Destekli Otomatik Sulama Sistemi .............................................. 49 Moisture-Sensitive Solar Assisted Automatic Irrigation System ................................... 50 Hidrolik Kol Tasarımı ve İmalatı ................................................................................... 51 Hydraulic Arm Design and Manufacturing .................................................................... 52 Güneş-Rüzgar Hibrit Güç Sisteminin Antalya Hava Koşullarında Uygulanması: Bir Durum Çalışması ............................................................................................................ 53 Application of Solar-Wind Hybrid Power System in Antalya Weather Conditions: A Case Study ...................................................................................................................... 54 Antalya Bölgesi İçin Rüzgar Karakteristiğinin Weibull Dağılımı Kullanılarak İncelenmesi ..................................................................................................................... 55 Investigation of Wind Characteristics for Antalya Region Using Weibull Distribution 56 Fusarium Solgunluğu: Türkiye'deki Palmiyelerde Yeni Bir Hastalık ............................ 57
1
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Fusarium Wilt: A New Disease on Palms in Turkey ..................................................... 58 Türkiye' de Protea (Protea cynaroides L.) Bitkisinde Yeni Bir Hastalık....................... 59 A New Disease on Protea (Protea cynaroides L.) in Turkey ......................................... 60 Sustainable Process for the Recovery of Cr(VI) from Waste Water .............................. 61 Recycleable and Sustainable System for the Purification of Chromate Plating Water .. 62 Isparta İklim Şartlarında Net Sıfır Enerjili Bina İçin Bir Analiz .................................... 63 An Analysis for Net Zero Energy Building in Isparta Climatic Conditions .................. 64 Organik Gübre Alırken Dikkat Edilmesi Gereken Bazı Özellikler ................................ 65 Some Parameters to be Considered When Buying Organic Fertilizer ........................... 66 Fide Kalitesi Üzerine Firma ve Çeşit Etkisi ................................................................... 67 The Company and Cultivar Effects on Seedling Quality ............................................... 68 Orman Genel Müdürlüğü Çalışanlarının Geoportal Bilgi Sistemi Üzerine Bakış Açıları ........................................................................................................................................ 69 The Opinions of Employees at General Directorate of Forestry on Geoportal Information System ........................................................................................................ 70 Değer-İnanç-Norm Teorisinin Satın alma Sonrası Sorumlu Tüketim Davranışlarına Uygulanması: Geri Dönüşüm ve Yeniden Kullanım ...................................................... 71 Application of Value-Belief-Norm Theory to Responsible Post Consumption Behaviors: Recycling and Reuse ...................................................................................................... 72 RCCI Bir Motorda Enjeksiyon Zamanlamasına Bağlı Yanma ve Motor Performans Karakteristikleri .............................................................................................................. 73 Combustion and Engine Performance Characteristics Depending on Injection Timing in a RCCI Engine ................................................................................................................ 74 PRF60 ile Çalışan RCCI Bir Motorda Emme Havası Giriş Sıcaklığının Yanma ve Motor Performansı Üzerindeki Etkileri ..................................................................................... 75 The Effects of Intake Air Temperature on Combustion and Engine Performance in a RCCI Engine Fueled With PRF60 ................................................................................. 76 Alaçatı’nın Kültürel Sürdürülebilirlik Bağlamında Sürdürülebilir Tasarım Rehberinin Oluşturulması ................................................................................................................. 77 Creating the Sustainable Design Guide of Alaçatı in Terms of Cultural Sustainability 78
2
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Alaçatı’da Geleneksel Konuttan Dönüştürülen Bir Otelin Bina Enerji Modellemesi ile Ekolojik Sürdürülebilirlik Açısından Değerlendirilmesi ................................................ 79 Assessment of a Hotel Converted from a Traditional House in Alaçatı by Building Energy Modeling in terms of Ecological Sustainability................................................. 80 Fotovoltaik Panellerde Yaşlanma ve Panel Verimi Üzerindeki Etkileri ........................ 81 Effects On Aging and Panel Yield In Photovoltaic Panels ............................................ 82 Jeotermal Enerji Kullanımında Ülkemiz ve Diğer Ülkelerin Mevcut Durumlarının Analizi ve Değerlendirilmesi .......................................................................................... 83 Analysis and Evaluation of Our And Other Countries On Using Of Geothermal Energy ........................................................................................................................................ 84 Bursa, Yalova ve Sakarya’da Odunsu Süs Bitkisi Üretimi ve Satışı Yapan Özel Fidanlıkların Değerlendirilmesi...................................................................................... 85 Evaluation of Private Nurseries Producing and Selling Woody Ornamental Plants in Bursa, Yalova, and Sakarya ............................................................................................ 86 Optimization of Polymer İnclusion Membranes For Transportation of Quercetin Flavonol .......................................................................................................................... 87 Transportation of Quercetin Flavonol From Real Samples By Using Polymer Inclusion Membranes ..................................................................................................................... 88 Analitik Hiyerarşi Prosesi ile Rüzgar Türbini Seçimi .................................................... 89 Wind Turbine Selection with Analytical Hierarchy Process .......................................... 90 Demand and Supply Projectıons of Major Food Grains in Pakıstan .............................. 91 Bir Turizm Tesisinde Toprak Kaynaklı Isı Pompası Sisteminin İncelenmesi ............... 92 Investigation of Ground Source Heat Pump System in a Tourism Planet ..................... 93 Sürdürülebilir Tekstil İçin Geri Dönüşüm ...................................................................... 94 Recycling For Sustainable Textile.................................................................................. 96 Sliding Friction and Wear Performance of the Nano-Bioceramic α Al2O3 Prepared by High Energy Milling....................................................................................................... 97 Gömülü Sistem Tabanlı Otomatik Meteoroloji Hava İstasyonu Tasarımı ..................... 98 Embedded System Based Automatic Meteorological Weather Station Design ............. 99 Tabakalı Kompozitlerde Farklı Tabaka Dizilimlerinin Eğilme Rijitliğine Etkisi ........ 100
3
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Effect Of Different Stacking Sequenze On Bending Stiffness Of Laminated Composites ...................................................................................................................................... 101 Atık Bronz Talaşlarının Geri Dönüştürülmesi ............................................................. 102 Recycling of Waste Bronze Chips ................................................................................ 103 Alternative Tourism and Sustainable Tourism Effects................................................. 104 The Importance of Human Resources in Sustaınable Tourısm .................................... 105 Karaman’da Bir Evin Elektrik İhtiyacının Şebeke Bağlantılı Fotovoltaik Sistem ile Karşılanması ................................................................................................................. 106 Maintaining a Home in Karaman Electricity Needed with Grid-Connected Photovoltaic System .......................................................................................................................... 107 Meta ve Orto Sübstitüe Anilin Türevi Heterosiklik Disazo Boyarmaddelerin Sentezi ve Sübstitüent, Asit ve Baz Etkisinin İncelenmesi ............................................................ 108 Synthesis of Meta and Ortho Substituted Aniline Derivative Heterocyclic Disazo Dyes and Investigation of Substituent, Acid and Base Effect ............................................... 109 Anilin ve Para Sübstitüe Anilin Türevlerinden Yeni Heterosiklik Disazo Boyarmaddelerin Sentezi ve Absorpsiyon Özelliklerinin İncelenmesi ........................ 110 Synthesis and Absorption Characteristics of New Heterocyclic Disazo Dyes from Aniline and Para Substituted Aniline Derivatives ........................................................ 111 Kentlerin Sürdürülebilirliği ve Sürdürülebilir Kentleşmede Belediyelerin Rolü ......... 112 The Sustainability of Cities and The Role of Municipalities in Sustaninable Urbanization ................................................................................................................. 113 Metronidazol ve Metaklopramit Etken Maddelerinin Çoklu Doğrusal Regresyon İle Tayini ............................................................................................................................ 114 Determination of Metronidazole and Metaclopramide Active Substances by Multiple Linear Regression ......................................................................................................... 115 Klaritromisin, Amoksisilin ve Lansoprazol Etken Maddelerinin Eş Zamanlı Spektrofotometrik Olarak Tayini.................................................................................. 116 Simultaneous Spectrophotometric Determination of Clarithromycin, Amoxicillin and Lansoprazole Active Ingredients .................................................................................. 117 Sürdürülebilir Kentsel Gelişme Çerçevesinde Kapalı Konut Yerleşkeleri; Antalya Örneği ........................................................................................................................... 118 Gated Comminities in Sustainable Urban Development Framework; Example Antalya ...................................................................................................................................... 119
4
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Bir Sosyalleşme Aracı Olarak Sanal Cemaatler ve Kadın İmajının Yeniden İnşası .... 120 Virtual Conmunities as a Means of Socialization and Reconstruction of Woman's İmage ...................................................................................................................................... 121 Sürdürülebilir Kültür Turizmi Olarak “Gül Hasatı” Kırsal Faaliyetinin İncelenmesi.. 122 Investigation of "Rose Harvest" Rural Activity as a Sustainable Culture Tourism ..... 123 Pamukkale/Karahayıt Bölgesinin Sürdürülebilir Turizm Potansiyelinin Kentsel Kimliğe Etkileri .......................................................................................................................... 124 The Effects of Sustainable Tourism Potential of Pamukkale / Karahayıt Region on Urban Identity ............................................................................................................... 125 Yavaş Kent Olma Yolunda Eğirdir .............................................................................. 126 Eğirdir on the Way to Be Slow City ............................................................................. 127 Sürdürülebilir Kalkınma Açısından Sera Gazı Emisyonu ............................................ 128 Greenhouse Gas Emissions for Sustainable Development ........................................... 129 Biyoplastikler ve Çevresel Etkileri ............................................................................... 130 Bioplastics and Environmental Effects......................................................................... 131 Yeni Ditiyenilpirol ve ProDOT Bazlı Kopolimerlerin Elektrokromik Özelliklerinin İncelenmesi ................................................................................................................... 132 An Investigation on Electrochromic Properties of New Copolymers Based on Dithienylpyrrole and ProDOT ...................................................................................... 133 Atık Plastiklerin Biyo-Bozunum Çalışmaları ............................................................... 134 The Study of Biodegradation at Waste Plastics............................................................ 135 Enerji Verimlilik Sınıflarına Uygun Cihazlar Kullanarak Enerji Tasarrufu Sağlanması ...................................................................................................................................... 136 Ensure of Energy Saving Using Appropriate Devices to Energy Efficiency Classes .. 137 Bir Reaktif Tekstil Boyar Maddesinin Eucalyptus camaldulensis Temelli Aktif Karbon ile Sulu Fazdan Giderimi .............................................................................................. 138 Adsorption of a Reactive Textile Dye by Eucalyptus camaldulensis Barks Based Activated Carbon .......................................................................................................... 140 Temel Gıdamız Buğdayın, Geçmişten Geleceğe Yolculuğu ........................................ 142 The Wheat as Our Basic Food, Past to Future Journey ................................................ 143
5
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Numerical Investigation of a Coupled Passive Cooling System Earth-To Air Heat Exchange and Solar Chimney in Hot Arid Zone .......................................................... 144 Türkiye’de İklim Değişikliğine Karşı “Kent ve Su” Arasındaki Koruma Kullanma Dengesinin Sağlanmasına Yönelik Stratejiler .............................................................. 145 Strategies for the Protection and Usage Balance Between "Urban and Water" Against Climate Change in Turkey............................................................................................ 146 Yeşil Sürdürülebilir Kentsel Yenileşme: Bolu İli Üzerinden Bir Değerlendirme ........ 147 Green Sustainable Urban Renovation: An Assessment on Bolu Province ................... 148 Mimarın Yapısal Atık Oluşumunda Etkisi ................................................................... 149 The Architect's Effect In Structural Waste ................................................................... 150 4-(4-Klorofenilaminoisonitrosoasetil) bifenil (KAKO) ile Modifiye Edilmiş Genleştirilmiş Cam Küreciklerin Karakterizasyonu ve Ni(II) Giderimi ...................... 151 Characterization of Modified Expanded Glass Beads with 4- (4Chlorophenylaminoisonitrosoacetyl) biphenyl and Ni(II) Removal ............................ 152 Antik Çağda Anadolu’da Spor Turizmi........................................................................ 153 Sport Tourism in Anatolia in Ancient Time ................................................................. 154 Erasmus + Projesi app_Healthy_Fish: Balık Çiftliklerinde Balık Sağlığı ve Refahı İçin Çiftlik Personelinin Beceri ve Deneyimlerini Yükseltmek Amaçlı İnovatif Ürünler (Cep Telefonu ve Tabletler) İçin Yeni Uygulamalar ............................................................ 155 Erasmus + Project app_Healthy_Fish: An Application for Innovative Tools (App For Mobiles and Tablets) That Qualifies the Staff on Health and Welfare of Fish in the Aquaculture Farms ....................................................................................................... 156 Biomass Supply Chain: A Literature Review .............................................................. 157 Sürdürülebilir Kalkınma ve Hemşirelik ....................................................................... 158 Sustainable Development and Nursing......................................................................... 159 Birinci Basamakta Halk Sağlığı Hemşireliği ve Sürdürülebilir Kalkınma Hedefleri .. 160 Public Health Nursing and Sustainable Development Goals in the Primary Healthcare Services ......................................................................................................................... 161 Güneş Enerjisi Kaynaklı Resorbsiyonlu Soğutma Sistemleri ile Soğuk Depo Uygulamaları ................................................................................................................ 162 Cold Storage Applications with Solar Resorption Cooling Systems ........................... 163
6
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürdürülebilirlik Etiği: Çevre-merkezci Etik Yaklaşım ............................................... 164 Sustainability Ethics: Eco-centric Ethical Approach.................................................... 165 Atık Kurşun Malzemesinin Gaz Atomizasyonu ile Geri Dönüşümü ve Sürdürülebilirlik İçin Toz Metalurijisi Yöntemiyle Fittings Malzemesi Üretimi .................................... 166 Recycling of Waste Lead Alloy by Gas Atomization and Production of Fittings Material by Powder Metallurgy for Sustainability...................................................................... 167 Gaz Atomizasyonu için Ark Yöntemi Kullanılarak Yeni Bir Tasarıma Sahip Sıcak Nozzle Geliştirilmesiyle Al 5083 Tozu ve Kompozit Fittings Malzemesi Üretimi ..... 168 Al 5083 Powder and Composite Fittings Material Production by Developing Hot Nozzle with a New Design Using Arc Method for Gas Atomization....................................... 169 Release of 5-Fluorouracil from Natural Polymeric Membranes as Controlled Drug Delivery ........................................................................................................................ 170 Küresel Isınma ve İklim Değişiminin Orta Anadolu Bölgesinde İncelenmesi ............ 171 A Study of Global Warming and Climate Change in the Central Anatolian RegionTurkey........................................................................................................................... 172 Sanayide İklim Değişikliğine Uyum ve Eko-Verimlilik (Temiz Üretim) Programı: Örnek Uygulamalar ...................................................................................................... 173 Adaptation to Climate Change and Eco-Efficiency (Cleaner Production) Programme in Industry: Best Practices ................................................................................................ 174 Aminoketooksim Bileşiklerinin Sıvı-Sıvı Ekstraksiyon ve Boya Renk Giderim Özelliklerinin İncelenmesi ............................................................................................ 175 Investigation of Liquid-Liquid Extraction and Dye Decolorization Properties of Aminoketooxime Compounds ...................................................................................... 176 Katı Oksit Yakıt Pillerinde Kullanılmak Üzere Hidrotermal Olarak Kompozit Elektrolit Sentezi ve Elektrokimyasal Karakterizasyonu ............................................................. 177 Hydrothermal Composite Electrolyte Synthesis and Electrochemical Characterization for Use in Solid Oxide Fuel Cells................................................................................. 178 Emission Of Greenhouse Gases From Machinery Usage In Agricultural Production Over Turkey.................................................................................................................. 179 Removal of Melamine from Milk by Polymeric Membrane Containing Carbon Nanotube....................................................................................................................... 180 Removal and Determination of Tobramicyn by SWV from milk through the rGO/PIM ...................................................................................................................................... 181
7
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürdürülebilir Kalkınma Modeli için Çevre Duyarlı Yapılarda Malzeme Seçiminin İncelenmesi ................................................................................................................... 182 Investigation of Material Selection on Environmentally Sensitive Buildings for Sustainable Development Model .................................................................................. 184 Güneydoğu Anadolu Bölgesi’nin Yenilenebilir Enerji Kaynakları Bakımından Potansiyelinin Araştırılması ......................................................................................... 186 Investigation of The Potential of Southeastern Anatolia Region in Terms of Renewable Energy Sources ............................................................................................................. 187 Atıktan Katık Yaratmak................................................................................................ 188 Turning Waste Into Income .......................................................................................... 189 Aerostat İle Ölçülen Rüzgar Hızlarının Veri Madenciliği Yöntemi Kullanarak Tahmini ...................................................................................................................................... 190 Estimation Of Wind Speed Measured By Aerostat Using Data Mining Method ......... 191 Bölgesel Rüzgar Enerji Potansiyelini Aerostat Yardımı İle Belirleme ........................ 192 Determining Regional Wind Energy Potential By Aerostat Assistance ...................... 193 Sürdürülebilir Toplumsal Kalkınmanın Mihenk Taşı: Çocuk Yoksulluğu Üzerine Karşılaştırmalı Bir Analiz ............................................................................................. 194 The Cornerstone of Sustainable Community Development: A Comparative Analysis on Child Poverty ................................................................................................................ 195 Antik Yunan ve Günümüz Tiyatrosu’nun Siyasi ve Toplumsal İşlevinin Kültürel Sürdürülebilirliğe Katkısı Üzerine İncelemeler ve Düşünceler .................................... 196 Analyzes and Thoughts on the Contribution of the Political and Social Function of Ancient Greek and Contemporary Theatre to Cultural Sustainability ......................... 197 Ebû Nasr El- Farabî’nin İdeal Devlet Anlayışı ............................................................ 198 Ideal Understanding Of State Ebû Nasr El- Farabî ...................................................... 199 Bir Çağın Kavgasında Hegel Ve Schopenhauer ........................................................... 200 At A Fight Of Age Hegel And Schopenhauer .............................................................. 201 Kültürel Sürdürülebiliriği Engellemesi Noktasında Popüler Kültür ve Etkisi ............. 202 Popular Culture And Effect About Prevent Cultural Sustainability ............................. 203 Determination Of The Surface Properties Of Bentonite By Inverse Gas Chromatography ...................................................................................................................................... 204
8
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Inverse Gas Chromatographic Characterization Of Nanocrystalline Cellulose ........... 205 Sürdürülebilir Tarımsal Üretim için Toprak Nem Sensörlerinin Etkin Kullanımı ....... 206 Efficient Use of Soil Moisture Sensors for Sustainable Agricultural Production ........ 207 Sürdürebilirlik İçin Akaryakıt Transfer Ünitesi Hava Ayırıcı Kapağı Tasarım ve Üretiminde Optimizasyon ............................................................................................ 208 Optimization of Air Separation Cover Design and Production for Fuel Transfer Unit for Sustainability ................................................................................................................ 209 Pirinç Malzemesi İnce Talaşı Geri Dönüşümü ile Güçlendirilmiş Fittings Malzemelerinin Diş Açma İşlemi Enerji Tüketiminde Optimizasyon ......................... 210 Optimization of Energy Consumption of Threading Process of Fittings Materials Reinforced with Fine Material Recycling of Brass Material ........................................ 211 TWIP Çelikleri ............................................................................................................. 212 TWIP Steels .................................................................................................................. 213 Otomotiv Endüstrisinde Yeni Nesil Çelik Kullanımının Önemi .................................. 214 Importance of Using New Generation Steel in Automotive Industry .......................... 215 Tarımın Çevre Üzerine Olumsuz Etkilerinin Azaltılması Çalışmaları “Çevre Amaçlı Tarım Arazilerinin Korunması Projesi Ereğli İlçesi Pilot Uygulaması; Dünü-Bugünü’’ ...................................................................................................................................... 216 Efforts To Reduce The Negative Impacts of Agriculture on The Environment “Ereğli District Pilot Implementation of The Project for The Protection of Agricultural Land for Environmental Purposes; Past-Present’ ........................................................................ 217 Halloysit Üzerinde Metil-Viyolet Boyar maddenin Adsorpsiyon Kinetiği ve Termodinamiği ............................................................................................................. 218 The Adsorption Kinetics and Thermodynamics of Methyl-Violet Dye on Halloysite 219 Livestock Resources and Meat Sector in Republic of Benin: Perspectives for a Suitable Development ................................................................................................................. 220 Goat Farming in Western African region: Opportunities, Challenges and Strategies for Sustainable Production ................................................................................................. 221 Sosyal Sürdürülebilirliğin Sağlanmasında Açık-Yeşil Alanların Rolü ........................ 222 The Role of Open-Green Spaces in The Ensuring of Social Sustainability ................. 223 Recovery of Cr(VI) from Industrial Water with a Novel Calix[4]arene Based PIM ... 224
9
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Recycleable of Cr(VI) from Real Sample with a Macrocyclic Carrier through PIM... 225 Tekstil Endüstrisi Atıksuyundan NF-90 Membranı ile Kimyasal Oksijen İhtiyacı (KOİ) Gideriminin İncelenmesi .............................................................................................. 226 Investigation of Chemical Oxygen Demand (COD) Removal with NF-90 Membrane from Textile Industry Wastewater ................................................................................ 227 Nanofiltrasyon Yöntemiyle Mobilya Endüstrisi Atıksuyundan Kimyasal Oksijen İhtiyacı (KOİ) Giderimi ................................................................................................ 228 Removal of Chemical Oxygen Demand (COD) from Furnıture Industry Wastewater by Nanofiltration Method .................................................................................................. 229 Sürdürülebilirlik Kapsamında Rüzgar Türbinlerinin Yapı Kabuğuna Strüktürel Entegrasyonu ................................................................................................................ 230 Structural Integration of Wind Turbines in the Construction Shell in the Context of Sustainability ................................................................................................................ 231 Starch: As a Water Permeable Green Membrane ......................................................... 232 Theophylline Release from Ethyl Cellulose Coated PVP/NaCMC Microspheres ....... 233 Vermikompost Teknolijisinde Rivo’s Hasat Sistemi Ve Avantajları ........................... 234 Rivo’s Harvesting System And Advantages In Vermicompost Technology ............... 235 ASPB’nin Engellilere Yönelik Politika ve Hizmetlerinin Engelli Bireylerin Refahının Sürdürülmesi Açısından Değerlendirilmesi.................................................................. 236 Assessment of ASPB's Policy and Services for Disabled Persons in Terms of Sustaniable Welfare of Disabled Persons ..................................................................... 238 Sürdürülebilir Kalkınma Sürecinde Kalkınma Ajanslarının Rolü: İZKA Örneği ........ 240 The Role of Development Agencies in the Sustainable Development Process: The Case of İZKA ........................................................................................................................ 241 Kıyı Mimari Kimliğinin Sürdürülebilirliği: Gemlik ..................................................... 242 The Sustainability Of Coastal Architectural Identity: Gemlik ..................................... 243 İlköğretim Öğrencilerinde Çevre Bilincinin Geliştirilmesi .......................................... 248 Development of Environmental Consciousness in Primary School Students .............. 249 Bor Endüstrisi Atıksularından Karışık Reçine ile Bor ve Sertlik Giderimi ................. 250 Boron and Hardness Removal from Boron Industry Wastewater by Mixed Bed Resin ...................................................................................................................................... 251
10
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürdürülebilir Ve Yaşanabilir Kentler İnşa Sürecinde Kentsel Dönüşüm Projelerinin Analizi: Bursa Kenti Örneği ......................................................................................... 252 Analysis Of The Urban Transformation Projects During Construction Of Sustainable And Habitable Cities: Example Of The City Of Bursa ................................................ 254 The Examination Of The Slow City Formations in The Context Of Turkey As An Alternative Modal For Sustainable And Inhabitable Life Areas .................................. 256 Kompleks Koaservasyon Yöntemi İle Bepanthen-Bemiks-E Vitamini-Badem Yağı Karışımı İçeren Mikrokapsül Üretimi .......................................................................... 258 Production Of Microcapsule Containing Bepanthen -Bemiks-Vitamin E-Almond Oil Mixture By Complex Coacervation Method ................................................................ 259 Karatay Medresesi Kapsamında Tarihi Süreçteki Sürdürülebilirlik............................. 260 Sustainability in the Historical Process: The Case of Karatay Madrasah .................... 261 Odunpazarı Evlerinin Kültürel Miras Açısından Değerlendirilmesi: Şakirler Sokak Örneği ........................................................................................................................... 262 Evaluation of Odunpazarı Houses in Terms of Cultural Heritage: The Case of Şakirler Street ............................................................................................................................. 263 A New Multi Criteria Decision Making Approach for Green Flexible Manufacturing Systems Considering Risk Factors ............................................................................... 264 A Multi Criteria Decision Making Approach For Green Supplier Selection Problem in English .......................................................................................................................... 265 Kente Dair Sürdürülebilir Tasarım Modeli: Ekokentler ............................................... 266 Sustainable Design Model For City: Ecocities ............................................................. 267 Kültürel, Ekonomik ve Sosyal Sürdürülebilirlik Bağlamında Ekoköyler .................... 268 Ecovillages In The Context Of Cultural, Economic And Social Sustainability ........... 269 Çöven Bitkisinden Elde Edilen Saponinin Deri Endüstrisi Arıtma Çamuru Üzerine Etkisinin Değerlendirilmesi .......................................................................................... 270 Evaluation of the Effect of Saponin Obtained from Soapwort Plant on the Tannery Sludge ........................................................................................................................... 271 Yeşil Ekonomi Kavramının Çevrenin Korunması Açısından Değerlendirilmesi ........ 272 Assessing the Green Economy Concept in the Context of Environmental Protection . 274 Yeşil Yıldız Uygulamasının Sürdürülebilir Turizm ve Çevresel Açıdan Önemi ......... 275
11
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Importance of the Green Star Implementation in terms of Sustainable Tourism and Environment ................................................................................................................. 277 Aspir Bitkisinde (Carthamus tinctorius L.) Islah Çalışmaları ..................................... 278 Breeding Studies on Safflower (Carthamus tinctorius L.) ........................................... 279 Türkiye’nin Yağlı Tohum Üretimi ve Bitkisel Yağ Açığı ........................................... 280 Oil Crops Production and Vegetable Oil Deficit of Turkey ......................................... 281 Allura red, Brilliant blue ve β-karoten Renk Maddelerinin Çoklu Doğrusal Regresyon İle Tayini ...................................................................................................................... 282 Multi-Linear Regression of Allura red, Brilliant blue and β-Carotene Food Colorants283 Ekolojik Sürdürülebilirlikte Yeşil Reklamlar: Göstergebilimsel Bir Analiz................ 284 Green Advertisements in Ecological Sustainability: A Semiological Analysis ........... 285 Bozyazı’da Kırsal Turizmde Paydaşların Algısının Değerlendirilmesi ....................... 286 The evaluation of stakeholders' perceptions for agrotourism in Bozyazı ..................... 287 Katı Atıklardan Enerji Üretiminin Türkiye’deki Örnekler Üzerinden İncelenmesi ..... 288 Investigation of Energy Production From Solid Waste Samples in Turkey................. 289 Akıllı Cephe Sistemleri ve Malzemelerinde Yeni Yaklaşımlar ................................... 290 New Approaches to Smart Facade Systems and Materials .......................................... 291 Yerel Yönetimlerin Sunmuş Oldukları Sosyal ve Sağlık Hizmetlerinin Sürdürülebilir Sosyal Kalkınmaya Etkilerinin Araştırılması; Bodrum Belediyesi Örneği .................. 292 Investigation of the Effects of Local Government Social and Health Services on Sustainable Social Development; Bodrum Municipality Example .............................. 293 Sürdürülebilir Yerel Ekonomik Kalkınma Kapsamında Üniversite Öğrencilerinin Yerel Ekonomiye Katkılarının Araştırılması; SDÜ Eğirdir MYO Örneği ............................. 294 Investigation of LocalEconomyContributions of UniversityStudents in theScope of SustainableLocalEconomic Development; Sample of SDÜ Eğirdir Vocational School ...................................................................................................................................... 296 Yok-Mekandan Dokunsal Mekana Dönüşüm: Trabzon Alacahan Örneği ................... 298 The Transformation From Non-Place Into Tactile Place: The Trabzon Alacahan Example ........................................................................................................................ 299 Sürdürülebilir Mekânlar İçin Peyzaj Planlamanın Onemi ............................................ 300
12
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Importance of Landscape Planning for Sustainable Spaces ......................................... 301 Sustainable Transdermal Release System for Naproxen .............................................. 302 The Use of Starch/PVA/Graphene Oxide Membranes for the Separation of AcetonWater Mixtures by Evapomeation ................................................................................ 303 Türkiye’nin Sektörel Sera Gazı Emisyonlarının Yapay Sinir Ağları ile Tahmini ....... 304 Estimation of Turkey's Sectoral Greenhouse Gas Emissions by Artificial Neural Networks ....................................................................................................................... 305 Türkiye Net Elektrik Enerjisi Tüketiminin Parçacık Sürü Optimizasyonu Tabanlı Modellenmesi ............................................................................................................... 306 Modelling Net Electricity Energy Consumption of Turkey Based on Particle Swarm Optimization ................................................................................................................. 307 Effect Of Nitrogen Fertilization Rate Of Various Forage Sources On Rumen Parameters ...................................................................................................................................... 308 Lojistik Sektöründe Sürdürülebilirlik: Yeşil Lojistik ................................................... 309 Sustainability In Logistics Sector: Green Logistics ..................................................... 310 Bitkisel Atık Yağların Evlerden Toplanma Mekanizmalarının Araştırılması .............. 311 Investigation of Collecting Mechanisms of Domestic Vegetable Waste Oils.............. 313 Kültürel Miras Kaynağı Olarak Ele Alınması Gereken Bir Değer: Geleneksel Artvin Evleri ............................................................................................................................ 315 A Value to be Considered as a Source of Cultural Heritage: Traditional Artvin Houses ...................................................................................................................................... 316 Düşük Maliyetli Bir Aktif Karbon ile Sulu Çözeltiden Cr(VI) Giderimi..................... 317 Removal of Cr(VI) from Aqueous Solution by a Low Cost Activated Carbon ........... 320 Investigation of Collecting Mechanisms of Domestic Vegetable Waste Oils.............. 322 Armut Psillidi, Cacopsylla pyri (L.) (Hemiptera: Psyllidae)’nin Kışlık-Form Erginlerine Karşı Yumurta Bırakmayı Engelleyiciler ve Yumurta Öldürücüler Olarak Bitkisel Uçucu Yağlar ................................................................................................................ 324 Plant Essential Oils as Oviposition Deterrents and Ovicides Against Pear Psylla, Cacopsylla pyri (L.) (Hemiptera: Psyllidae)................................................................. 325 Nohut Genotiplerinin Baklagil Tohumböceği, Callosobruchus chinensis L. (Coleoptera: Bruchidae)’e Karşı Dayanıklılık Bakımından Değerlendirilmesi ................................ 326
13
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Evaluation of Chickpea Genotypes For Resistance Against The Pulse Beetle, Callosobruchus chinensis L. (Coleoptera: Bruchidae) ................................................. 327 Sürdürülebilir Çevre Yönetiminde Göller Bölgesi ve STK ların Rolü: GÖLDOSK Örneği ........................................................................................................................... 328 The Role of NGOs in Sustainable Environmental Management in the Lakes Region: The Case of GOLDOSK ............................................................................................... 329 Emdirme Yöntemi İle Hazırlanmış CuO-CeO2/Carbon Katalizörlerinin Karakteristik ve CO Oksidasyonu Katalitik Aktivite Özelliklerine Çözücünün Etkisi .......................... 330 The Influence Of Solvent On The Characteristic Properties And CO Oxidation Catalytic Activities Of CuO-CeO2/Carbon Catalysts Prepared By Impregnation ....................... 331 CO Oksidasyonu için Ag2O/SiO2 ve Co3O4/SiO2 Katalizörlerinin Sentez ve Karakterizasyonu .......................................................................................................... 332 The Synthesis And Characterization of Ag2O/SiO2 and Co3O4/SiO2 Catalysts For CO Oxidation ...................................................................................................................... 333 Endüstri Bitkilerinde Robotik Sıra Üzeri Yabancı Ot Mücadelesinin İncelenmesi ..... 334 Investigation of an Robotic Intra-Row Weeder for Industrial Crops ........................... 335 Sürdürülebilir Kalkınma İçin Ekolojik Yapı Tasarım Kriterleri .................................. 336 Ecological Building Design Criteria for Sustainable Development ............................. 337 Sürdürülebilir Turizm: Kültür Turizmi Ve Kültürel Miras .......................................... 339 Sustaınable Tourısm: Culture Tourısm And Cultural Herıtage .................................... 341 Trabzon/Ortahisar Fatih Büyük Camii’nin Bölgedeki Turizm Bağlamında Yarattığı Sürdürülebilir Gelişim .................................................................................................. 343 Sustainable Development Created By The Trabzon/Ortahisar Fatih Great Mosque In The Scope Of Tourism In The Area ............................................................................. 344 Fenomenolojik Açıdan; Korku ve Kaygıların İletişim ve Kişisel Gelişim Üzerindeki Yansımaları ................................................................................................................... 345 From Phenomenological Angle; Reflections of Fear and Anxiety on Communication and Personal Development ........................................................................................... 347 Homeros ve Hesiodos'ta İnsanın Bireyselleşme Çabası ............................................... 349 Human Individualization Effort in Homeros and Hesiodos ......................................... 350 Sürdürülebilir Kültürel Miras Yönetimi ....................................................................... 351
14
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sustainable Cultural Heritage Management ................................................................. 352 Sürdürülebilirlik Bağlamında; Geleneksel Mimaride İklimle Uyumlu Yapılar: ElazığHarput Evleri Üzerinde İnceleme ................................................................................. 353 In The Context Of Sustainability; Compatible With Climate Buildings İn Traditional Architecture: An Examination About Elazığ-Harput Houses ...................................... 354 Sürdürülebilir Deniz Turizminde Çekici Bir Potansiyel: Sualtı Batık Turizmi ........... 355 An Attractive Potential in Sustainable Aquamarine Tourism: Wreck Tourism ........... 356 Uçucu Kül İçerikli Geopolimer Harçların Reolojik Özelliklerinin Belirlenmesi......... 357 Determination Of The Reological Properties Of Geopolymer Mortars With Fly Ash 358 Sürdürülebilir Yapı Tasarımında Enerji Verimliliği ve Örnek Bir Çalışma ................ 359 Energy Efficiency in Sustainable Building Design and a Case Study ......................... 360 Millenyum Kalkınma Hedeflerinden Sürdürülebilir Kalkınma Hedeflerine: Değişen Sürdürülebilirlik Söylemleri Karşısında Değişmeyen Politika Entegrasyonu İhtiyacı 361 From Millennium Development Goals to Sustainable Development Goals: Never Faded Necessity for Policy Integration Despite Changing Policy Discourses ........................ 362 Sığınma Evinden Ayrılan Kadınların Sürdürebilir Yaşamları ..................................... 363 Sustainable Living of Women Who Left the Shelter ................................................... 364 Turizm Sektörünün Bölgesel Kalkınmada Önemi; Burdur İli Üzerine Bir Araştırma . 365 Importance Of Tourism Sector In Regional Development; A Research On Burdur Province ........................................................................................................................ 366 Meta ve Orto Sübstitüe Anilin Türevi Heterosiklik Disazo Boyarmaddelerin Sentezi ve Sübstitüent, Asit ve Baz Etkisinin İncelenmesi ............................................................ 367 Synthesis of Meta and Ortho Substituted Aniline Derivative Heterocyclic Disazo Dyes and Investigation of Substituent, Acid and Base Effect ............................................... 368 Anilin ve Para Sübstitüe Anilin Türevlerinden Yeni Heterosiklik Disazo Boyarmaddelerin Sentezi ve Absorpsiyon Özelliklerinin İncelenmesi ........................ 369 Synthesis and Absorption Characteristics of New Heterocyclic Disazo Dyes from Aniline and Para Substituted Aniline Derivatives ........................................................ 370 Green Membrane for the Separation of Acetic Acid-Water Mixtures by Evapomeation ...................................................................................................................................... 371 Ultrasonication: A Green Membrane-Modification Method ........................................ 372
15
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Peyzaj Tasarımında Nano Teknolojik Malzeme Kullanımı ......................................... 373 Nano Technological Material Usage In Landscape Design ......................................... 374 Kent Peyzajı Tasarımında Yenilenebilir Enerji Kaynaklarının Kullanımı ................... 375 Usage Of Renewable Energy Resources To Urban Landscape Design ....................... 376 Sustainable Banking ..................................................................................................... 377 Yeşil Bankacılık ........................................................................................................... 378 Kültürel Sürdürülebilirlik Bağlamında Müzikte Yenilik Çalışmaları .......................... 380 Innovative Studies in Music in the context of Cultural Sustainability ......................... 381 Denizyolu Limanlarının Bölgesel Kalkınmaya Etkisi ve Tekirdağ İli Örneği ............. 382 The Impact of Ports on Regional Development and the Case of Tekirdag Province ... 383 Alzeimer İlaçlarının Kemometrik Tayini ..................................................................... 384 Chemometric Determination Of Alzheimer's Drug ...................................................... 385 İkili İlaç Kombinasyonlarının Kemometrik Analizi ..................................................... 386 Chemometric Analysis Of Binary Drug Combination ................................................. 387 Kırsal Yoksulluk ve Sürdürülebilir Kırsal Kalkınma Politikaları ................................ 388 Rural Poverty and Sustainable Rural Development Policies........................................ 389 Air Pollution in Foundries in the Cupola ..................................................................... 390 Effect Of Manganese, Nickel, Molybdenum and Vanadiumon of Mechanical Behavior of Austempered Ductile Iron ........................................................................................ 391 Çevresel Kuznets Eğrisi Hipotezinin G7 Ülkeleri Kapsamında Araştırılması: İleri Panel Veri Analizi .................................................................................................................. 392 Investigation of the Environmental Kuznets Curve Hypothesis in the G7 Countries: Advanced Panel Data Analysis .................................................................................... 393 Finansal Gelişme, Uluslararası Ticaret Ve Enerji Tüketiminin Ekonomik Büyüme Üzerindeki Etkilerinin Araştırılması: Türkiye Örneği.................................................. 394 Investıgatıon On The Effects Of Fınancıal Development, Foreign direct investment Energy Consumptıon And Internatıonal Trade On Economıc Growth: The Case Of Turkey........................................................................................................................... 395
16
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Toplumsal Kalkınma Açısından Türkiye'deki Sosyal ve Ekonomik Destek (SED) Hizmetinin Değerlendirilmesi ...................................................................................... 396 Evaluation of Social and Economic Support Service in Turkey in terms of Community Development ................................................................................................................. 397 Analytical Methods For The Determination Of Acrylamide In Food And Water Samples: Sample Preparation-Mass Spectrometry ....................................................... 398 Rapid Determination of Ionization Constants (pKa) of Amlodipine by UV Spectroscopy Using 96-Well Microtiter Plates ............................................................ 399 Amlodipinin İyonizasyon Sabitlerinin (pKa) UV-Spektroskopi 96-well Microtiter Plate ile Hızlı Belirlenmesi .................................................................................................... 400 Kalite Fonksiyonu Yayılımı ve Atıksu Arıtma Tesislerinde Üretilen Biyogazın Niteliklerinin İyileştirilmesi İçin Uygulanması ............................................................ 401 Quaity Function Deployment And An Its Application To Improve The Characteristics Of Biogas Produced At Wastewater Treatment Plants ................................................. 402 Bir Bütünleşik Çok Ölçütlü Karar Modeli Ve Atıksu Arıtma Tesislerindeki Gaz Yakıtların Önem Sıralamasının Belirlenmesi ............................................................... 403 An Integrated Multi-Criteria Decision Model and The Determination Of Order Of Importance Of Gas Fuels At Wastewater Treatment Plants ......................................... 404 Sustainability in Chemical Engineering ....................................................................... 405 Halk Eğitimi Merkezleri ve Kadın Yetişkinler............................................................. 406 Multimoora Yöntemi İle Tehlikeli Atık Miktarı Açısından İllerin Değerlendirilmesi 407 Evaluation Of Cities In Terms Of Hazardous Waste Amount By Multimoora Method ...................................................................................................................................... 408 Yenilenebilir Enerji Kaynaklarının Seraların Elektrik Enerjisi İhtiyacında Kullanımı 409 Using of Renewable Energy Sources in Electric Energy Need of Greenhouses .......... 410 Bir Isı Değiştiricisinde Farklı Çeşit ve Konsantrasyonlardaki Nano Akışkanların Isıl Performansa Etkisinin İncelenmesi .............................................................................. 411 Investigation Of Thermal Performance Effect Of Nano Fluids In Different Types And Concentrations In A Heat Exchanger ........................................................................... 412 Bir Ortamda Kullanılan Hava Perdesinin Farklı Yerleştirme Şekillerinin Isıl İzolasyona Etkisinin Nümerik Olarak İncelenmesi ........................................................................ 413 Numerical Investigation Of The Effects Of Different Placement Methods On Thermal Insulation Of The Air Curtain In An Environment ...................................................... 414
17
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Gökdelenlerin Sürdürülebilirlik ve Sürdürülebilir Şehirler Bağlamında Yeniden Düşünülmesi - Yeni Tasarım İlkeleri ........................................................................... 415 Rethinking the Skyscrapers in the Context of Sustainability and Sustainability Cities New Design Principles ................................................................................................. 416 Kıyı Tipi Dalga Enerjisinden Elektrik Üretim Sistemlerinin Dolgu Alanlarında Kullanılabilirliğinin Araştırılması ................................................................................ 417 Investigation of the Usability of Electricity Production from Coastal Wave Energy Systems in Land Reclamation Areas ............................................................................ 418 Nanoparçacık Modifiyeli Kompozitlerin Kenar Çentikli Eğilme Numunesi Kullanılarak Kırılma Tokluklarının Değerlendirilmesi ..................................................................... 419 Fracture Toughness Evaluation of Nanoparticle Modified Composites Using Single Edge Notched Bending (SENB) Specimens ................................................................. 420 Kent Markalaşması ve Kent Kimliğinin Markalaşmaya Katkısı .................................. 421 City Branding and Contribution of City Identity to City Branding .............................. 422 Arı Ürünlerinde Mikrobiyal Kontaminasyon ............................................................... 423 Microbial Contamination in Bee Products ................................................................... 424 Çevre Güvenliği ve Arı Ürünlerinde Kimyasal Kontaminasyon.................................. 425 Environmental Safety and Chemical Contamination in Bee Products ......................... 426 New Approaches and Sustainability in Agricultural Activities.................................... 427 Alternative Energy Source Use in Greenhouse Heating .............................................. 428 Devlet ve Toplum Düzeninin Oluşumu ve Sürdürülebilirliğinde Adaletin Önemi ...... 429 The Importance of Justice in the Formation and Sustainability of the State and Social Order ............................................................................................................................. 430 İktisadi Kalkınma ve bu Kalkınmanın Sürdürülebilirliğinde İşbirliği ve Dayanışmanın Önemi; Ibn Haldun ....................................................................................................... 431 The Importance of Cooperation and Solidarity in Economic Development and its Sustainability; Ibn Khaldun .......................................................................................... 432 Sera Güzlük Domates Yetiştiriciliğinde Yeni Eğilim: Sıvı Organik Gübre Tüketimi . 433 New Trend in Autumn Tomato Growing: Liquid Organic Fertilizer Consumption .... 434 Domates Yetiştiriciliğinde Çiftlik Gübresi, Yeşil Gübre, Mikrobiyal Gübre Ve Bitki Aktivatörü Kullanımının Yaprakların Besin Elementi İçeriği Üzerine Etkisi ............. 435
18
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Influence Of The Use Of Farm, Green And Microbial Manures And Plant Activators On The Minerals Content Of Leaves In Tomato Cultivation ..................... 436 Holstein Irkı İneklerde Kolostrum Kalitesini Etkileyen Bazı Faktörler ve Kolostrum Kalitesi ile Barındırma Şeklinin Buzağıların Büyüme Performansına Etkileri ............ 437 Some Non-Genetıc Factors Affecting Colostrum Quality in Holstein Cows and Effects of Barning Type And Colostrum Quality on Growth Performance of Calves ............. 438 Holstein Irkı Buzağılarda İçirilen Sütün Bazı Bileşenlerinin Büyüme Performansı Üzerine Etkileri............................................................................................................. 439 Effects of Some Milk Compounds on Growth Performance of Holstein Calves ......... 440 Arkeolojik Eserlerin 3d Lazer Tarayıcılar ile Modellenmesi, Belgelenmesi ve Arşivlenmesi ................................................................................................................. 441 Modelling, Documentation and Archiving of Archaeological Artifacts Using 3D Laser Scanners ........................................................................................................................ 442 E-Beam Tekniği ile üretilmiş CdIn2Te4/CdS İnce Film Güneş Pillerinin Elektriksel Özellikleri ..................................................................................................................... 443 Electrical Properties of CdIn2Te4/CdS Thin Film Solar Cells Produced by the E-Beam Technique ..................................................................................................................... 444 Sürdürülebilir Tarım için Süper Absorban Polimerlerin (SAP) Taflan (Euonymus Japonicus Aureo-Marginatus) Bitkisinde Toprak Neminin Korunmasındaki Etkisinin İncelenmesi ................................................................................................................... 445 Examination of the Effect of Super Absorbent Polymers for Sustainable Agriculture on Soil Moisture in Spindle Plant (Euonymus Japonicus Aureo-Marginatus) .................. 446 Ters Faz Sıvı Kromatografi Yöntemiyle Tofasitinib için Termodinamik Özelliklerin Belirlenmesi .................................................................................................................. 447 Determination of Thermodynamic Properties for Tofacitinib by Reversed Phase Liquid Chromatography ........................................................................................................... 448 Sinnarizinin Metot Optimizasyonu için Asetonitril-Su İkili Karışımlarındaki Kromatografik Davranışının Belirlenmesi ................................................................... 449 Identification of Chromatographic Behaviour in Acetonitrile-Water Binary Mixture for Method Optimization of Cinnarizine............................................................................ 450 Kısıtlı Sulama Koşullarında Putresin Uygulamalarının Bitki Büyüme Ve Gelişmesi Üzerine Etkileri............................................................................................................. 451 The Effect Of Putrescine On Growth And Development Of Strawberry Plants Grown In Soilless Conditions With Restricted Deficit Irrigation ................................................. 452
19
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Benzinli Motorda Termoelektrik Jeneratörü Yardımıyla Egzoz Gazı Isı Enerjisinin Geri Kazanımı....................................................................................................................... 453 Recycling of Exhaust Gas Heat Energy with the Help of Thermoelectric Generator in Gasoline Engine............................................................................................................ 454 Otomotiv Termoelektrik Jeneratörünün Deneysel ve Sayısal Performansı.................. 455 Experimental and Numerical Performance of Automotive Thermoelectric Generation ...................................................................................................................................... 456 Üretimde Verimlilik ve Sürdürebilirlik İçin 3 - 6'' Boru Bağlantı Elemanlarının Döküm Derece Sisteminde Optimizasyon ................................................................................. 457 Optimization of Casting Degree System of 3 - 6 '' Pipe Fittings for Productivity and Sustainability in Production ......................................................................................... 458 Sürdürebilirlik İçin İçten Dişli Pompalarda Benckmarking Analizi ile Tasarım ve Enerji Tüketiminde Optimizasyon .......................................................................................... 459 Optimization in Design and Energy Consumption by Benchmarking Analysis in Internal Gear Pumps for Sustainability ...................................................................................... 460 Karamanoğlu Mehmetbey Üniversitesi Fotovoltaik Sistem Potansiyeli ve Maliyet Analizi .......................................................................................................................... 461 Karamanoglu Mehmetbey University Photovoltaic System Analysis and Its Cost Analysis ........................................................................................................................ 462 Isı Pompalarında (Toprak- Yer Kaynaklı) Teknolojik İlerlemesi ................................ 463 Heat Pumps (Soil-Ground Source) Technological Progress ........................................ 464 Yenilenebilir Enerji Kaynaklarının Türkiye’deki Geleceği ......................................... 465 The Future of Renewable Energy Sources in Turkey................................................... 466 Havalimanlarındaki Akülerin Gsm Modülü İle Kontrolü ............................................ 467 Control Of Batteries in The Airports With Gsm Module ............................................. 468 Güneş Enerjili Kesintisiz Güç Kaynağı Tasarımı Ve Uygulaması............................... 469 Solar Powered Uninterruptible Power Supply Design And Application ..................... 470 “Üniversite bize ne veriyor? Sektör bizden ne bekliyor?” Örnek Bir Uygulama ........ 471 “What Does University Give us? What Does the Sector Want from us?” A Case Study ...................................................................................................................................... 472
20
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürdürülebilir Ekonomik Gelişim Göstergeleri İçin Bir Veri Zarflama Analizi Uygulaması ................................................................................................................... 473 Data Envelopment Analysis for Sustainable Economic Development Indicators: A Case Study ............................................................................................................................. 474 Astemizol ve Klotrimazolün İyonlaşma Sabitinin Tayini için Sıvı Kromatografik, Spektrofotometrik ve Potansiyometrik Metotların Karşılaştırılması............................ 475 Comparison of Liquid Chromatographic, Spectrophotometric and Potentiometric Methods for Determination of Dissociation Constant of Astemizole ad Clotrimazole 476 Çevre Denetimli Yumurta Üretim Kümesinde Hissedilen Sıcaklık ile Yumurta Kalitesi Arasındaki İlişkiler ....................................................................................................... 477 Relation Between Sensible Temperature And Egg Quality in Environmentally Controlled House .......................................................................................................... 478 Kekliklerde (Alectoris Chukar) Yetiştirme Sistemi, Kesim Yaşı ve Cinsiyetin Bazı Et Kalite Özellikleri Üzerine Etkisi .................................................................................. 479 The Effects of Production System, Slaughter Age and Gender on Some Meat Quality Traits in Partridges (Alectoris Chukar) ........................................................................ 480 Hayvancılık İşletmelerindeki Atık Yönetimi Uygulamalarının Tarla Tarımı Üzerine Etkileri: Derleme .......................................................................................................... 481 Effects of Livestock Waste Management Practices on Field Farming:A Review ....... 482 Üç Etkili Bir Absorpsiyonlu Soğutma Sisteminde Kütlesel Akışın İncelenmesi ......... 483 Mobilya Sektöründe Sürdürülebilir Bir Kaynak Olarak Ahşap Ve Orman Ürünleri ... 484 Wood and Wooden Products as a Sustainable Source in the Furniture Sector ............ 485 Genetik Algoritma Kullanılarak Hibrit Yenilenebilir Enerji Kaynaklarının Maliyet Minimizasyonu ............................................................................................................. 486 Cost Minimization of Hybrid Renewable Energy Systems Using Genetic Algorithm 487 Kati Atiktan Enerji Üretim Tesisi Yer Seçimi Problemi için Yeni Bir Bulanik Karar Verme Yaklaşimi .......................................................................................................... 488 A Fuzzy Decision Making Approach for Selection A Solid Waste Energy Production Plant Problem ............................................................................................................... 489 Sürdürülebilirlik Etiği: Çevre-merkezci Etik Yaklaşım ............................................... 490 Sustainability Ethics: Eco-centric Ethical Approach.................................................... 491
21
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Vermikompostun Trakya İlkeren/5BB Aşı Kombinasyonundaki Asma Fidanlarının (Vitis vinifera L.) Sürgün Gelişimine Etkisi ................................................................. 492 Vermicompost Affects Shoot Growth of Trakya Ilkeren/5BB Grafting Combination Grapevine (Vitis vinifera L.) Saplings .......................................................................... 493 Günışığı Aydınlatma Sistemleri Kullanımıyla Enerji Tasarrufu Ve Co2 Salınımının Önlenmesi ..................................................................................................................... 494 Energy Saving And Preventing Release Of Co2 By Using Daylight System ............... 495 Güneş Kulelerinin Ülkemizde Ve Dünyadaki Potansiyeli Ve Mevcut Durumu .......... 496 Potantial And Current Situation Of Solar Towers In Turkey And World .................... 497 Alüminyum Curuflarından Metal Geri Dönüşümünün Ekolojik Sürdürülebilirlik Açısından Önemi .......................................................................................................... 498 In Terms of Ecological Sustainability The Importance of The Recycling of Metal from Aluminum Dross .......................................................................................................... 499 A Case Study To Design Pv Solar Energy System For A Rezidance in KahramanmaraşTurkey........................................................................................................................... 500 Bir Gaz Türbininin Enerji Ve Ekserji Analizi .............................................................. 501 Energy And Exergy Analysis Of A Gas Turbine ......................................................... 502 Bir Trijenerasyon Sistemin Enerji Analizi ................................................................... 503 Energy Analysıs Of A Trıgeneration System ............................................................... 504 Çinli Postacı Algoritması ile Şehir Tanıma Tur Otobüsleri İçin Optimum Rota Tespiti: Bursa Örneği ................................................................................................................. 505 Optimal Route Detection For City Recognition Tour Buses with Chinese Postman Algorithm ..................................................................................................................... 506 Atık Alüminyum İçecek Kutularının Geri Dönüştürülmesiyle Üretilen Malzemenin Termal ve Mekanik Özelliklerinin İncelenmesi ........................................................... 507 Analysis of the Thermal and Mechanical Properties of the Material Produced by Recycling of Waste Aluminum Beverage Boxes ......................................................... 508 Atık İçecek Kutularının Geri Dönüşümü için Pratik Kullanımlı Pnömatik Presleme Makinesi Tasarımı ........................................................................................................ 509 Design of Practical Pneumatic Pressing Machine for Recycling of Waste Beverage Boxes ............................................................................................................................ 510 Yem Karma Makinası Şasisinin Bilgisayar Destekli Yapısal Analizi ......................... 511
22
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Computer Aided Structure Analysis of Mixer Feeders Chassis ................................... 512 Harmanlama ve Ayırma Düzeni için PLC Tabanlı Kontrol Sistemi Tasarımı ve Geliştirilmesi ................................................................................................................ 513 Design and Development of PLC-Based Control System for Threshing and Separation Unit ............................................................................................................................... 514 Yalvaç Bölgesinde Yapılan Betonarme Binalarda Yanlış Taşıyıcı Sistem Seçimi Nedeni İle Ortaya Çıkan Düzensizlikler ve Buna Bağlı Beton İsrafı ....................................... 515 Irregularities Due to Wrong Structural System Selection in Reinforced Concrete Buildings in Yalvac District and Concrete Waste Due to It ......................................... 517 Anadolu’daki Ekolojik Restorasyon Çalışmalarında Tohum Kaynaklarının Önemi ... 519 The Importance of Seed Sources in Ecological Restoration Studies in Anatolia ......... 520 Muhasebe Mesleğinin Öğrenciler Tarafından Algılanması: Ayvacık Meslek Yüksekokulu Örneği ..................................................................................................... 521 The Perception of Accounting Profession by Students: ............................................... 522 An Example of Ayvacık Vocational School ................................................................ 522 Türkiye’nin Farklı Bölgelerinden Toplanan Bazı Arpa (Hordeum vulgare L.) Köy Popülasyonlarının Agromorfolojik Karakterizasyonu.................................................. 523 Agromorphological Characterization of Some Barley (Hordeum vulgare L.) Landraces Collected from Different Provinces of Turkey ............................................................. 524 Türkiye’deki Fasulye Çeşitlerinin Antraknoz Hastalığına Karşı Dayanıklılığının Farklı Moleküler Markörler Kullanılarak Karakterizasyonu .................................................. 525 Characterization of Turkish Common Bean (Phaseolus vulgaris L.) Cultivars for Resistance to Anthracnose Disease by Using Different Molecular Markers ............... 526 Turkish Kitchen Culture From Our Local Tastes Batirik ............................................. 527 Our Cultural Heritage: Turkish Coffee ......................................................................... 528 Reactions of Safflower (Carthamus tinctorius L.) Cultivars to Salt Doses During Their Germination and Seedling Growth ............................................................................... 529 Çimlenme ve Fide Gelişimi Sırasında (Carthamus tinctorius L.) Aspir Çiçek Çeşitlerinin Tuz Dozlarına Tepkimeleri ........................................................................................... 530 Çevre Dostu Binalar ve Yeşil Bina Sertifika Sistemleri............................................... 531 Eco-Friendly Buildings and Green Building Certificate Systems ................................ 532
23
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürdürülebilir Kalkınma Çerçevesinde Çevre Ekonomisi ve Çevre Etiği İlişkisi........ 533 Environmental Economy and Environmental Ethics in the Framework of Sustainable Development ................................................................................................................. 534 Sığırladaki Mastitis Vakalarından İzole Edilen Staphylococcus Aureus İzolatlarının Artan Antibiyotik Dirençlilikleri .................................................................................. 535 Increased Antibiotic Resistance Of Staphylococcus Aureus Isolates Isolated From Cattle Mastitis Cases ............................................................................................................... 536 Türkiye’de Kültüre Edilen Kara Kaplumbağalarından (Testudo Graeca Ibera ) Salmonella Spp. İzolasyonu ......................................................................................... 537 Isolation Of Salmonella Spp. From Land Turtles (Testudo Graeca ibera) Cultured İn Turkey........................................................................................................................... 538 Ülkemizde Yeşil Çatı Sistemlerinde Yetiştirme Ortamı Olarak Kullanılabilecek Yerel Maddelerin Değerlendirilmesi ...................................................................................... 539 Evaluation Of Local Materials For Use As Green Roof Growing Media In Turkey ... 540 Türkiye’de Sürdürülebilir Ambalaj Tasarıma Sahip Ürünlerin Tüketici Tarafından Talep Edilme Eğilimi.............................................................................................................. 541 Demand Pattern of Consumer with Sustainable Packaging Designs in Turkey ........... 542 Katı Atık olan Piroliz Edilmiş Erik Çekirdeği ile Metil Mavinin Sulu Çözeltilerinden Giderilmesi ................................................................................................................... 543 Removal of Methyl Blue from Aqueous Solution by Pyrolyzed Plum Kernel, Solid Waste ............................................................................................................................ 544 Ayvacık Yöresinin Sosyo-Ekonomik Gelişmişlik Düzeyinin Meslek Yüksekokulu Öğrencileri Tarafından Algılanma Düzeyi ................................................................... 545 Assessment of Socio-Economic Development Level of Ayvacık Region by Vocational School Students ............................................................................................................ 546 Are Turkish Smart Cities Really Planned as Smart City? The Case of Karaman and Kars ...................................................................................................................................... 547 Akıllı Türk Kentleri Gerçekten Akıllı Kent Olarak Planlanıyor mu? Karaman ve Kars Örneği ........................................................................................................................... 548 Sürdürülebilir Tekstil Üretiminde “Organik Pamuk” ve Önemi .................................. 549 Significance of “Organic Cotton” in Sustainable Textile Manufacturing ................... 550 Bina Cephe Elemanlarının Yaşam Döngüsü Değerlendirme Süreçlerinde Kullanılan Yöntemlerinin İncelenmesi........................................................................................... 551
24
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Investigation of Methods Used in Life Cycle Assessment of Building Facade Elements ...................................................................................................................................... 552 Kent Kıyılarının Dolgu Alanlarında Rüzgar Şiddetine Bağlı Olarak Kullanım Yoğunluğunun Düşmesi Sorununun Maltepe Dolgu Alanında Tespiti ........................ 553 Investigation of the Relationship Between Wind Force and Decreasing the Intensity of Usage in Maltepe Coastal Fill Area .............................................................................. 555 Sustainable Agricultural Development ......................................................................... 556 V Tipi Bir Stirling Motorunun Termodinamik Analizi ................................................ 558 The Therdynamic Analysis of A V-Type Stirling Engine ............................................ 559 Beta Tipi Bir Stirling Motorunda Rejeneratör Hacminin Motor Performansına Etkisi 560 The Effect of Regenerator Volume to Engine Performance in A Beta Type Stirling Engine ........................................................................................................................... 561 A Sustainable Solution in Aquaculture AQUAPONICS .............................................. 562 Kent Parklarının Sürdürülebilirlik Ve Ekolojik Yaklaşım Çerçevesinde Değerlendirilmesi ......................................................................................................... 563 Evaluation of Urban Parks in the Framework of Sustainability and Ecological Approach ...................................................................................................................................... 564 Tema Parklarında Sürdürülebilirlik Ve Ekolojik Yaklaşım Açısından Bir Araştırma: Vialand Tema Park Örneği ........................................................................................... 565 A Survey on Sustainability and Ecological Approach in Theme Parks: The Case of VialandTheme Park ...................................................................................................... 566 Sürdürülebilir Kalkınma Çerçevesinde Çevre Ekonomisi ve Çevre Etiği İlişkisi........ 567 Environmental Economy and Environmental Ethics in the Framework of Sustainable Development ................................................................................................................. 568 GRI Raporlama Çerçevesinde Hazırlanan Sürdürülebilirlik Raporlarında Açıklanan Performans Göstergeleri ve BİST’de İşlem Gören Şirketlere İlişkin Bir Uygulama ... 569 Performance Indicators Explained in the Sustainability Reports Prepared in the GRI Reporting Framework and a Practice Related to the Companies Acted in Istanbul Stock Exchange ...................................................................................................................... 570 Irrigation Purposed Dam As A Source Of Small Hydropower In Afyonkarahisar. (Case Study: Yavaslar Dam) .................................................................................................. 571 The Capacity of Ngos and Their Impact On Local Development In Isparta ................ 572
25
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Isparta’daki STK’ların Kapasitesi ve Yerel Kalkınma Üzerindeki Etkileri ................. 573 Kültür ve Bölgesel Kalkınma ....................................................................................... 574 Culture and Regional Development ............................................................................. 575 Bir Gıda Fabrikasında Enerji Performans Değerlendirmesi ......................................... 576 Evaluation of Energy Performance at a Food Factory ................................................. 577 Gençlik Refahı Politikalarının Sürdürülebilirliğinin Değerlendirilmesi ...................... 578 Evaluation of Sustainability of Youth Welfare Policies ............................................... 579 Ekonomik Bağımsızlığın Sürdürülebilmesi Açısından SYDV Yardımlarının İncelenmesi ................................................................................................................... 580 Analysis of SYDV’s Social Fee in Terms of Sustainability Economic Independence 582 Sentetik Çözeltilerden Kimyasal Koagülasyon-Çöktürme Metoduyla Demir-III Klorür Kullanılarak Bor Giderimi ............................................................................................ 584 Boron Removal from Solutions by Chemical Coagulation-Precipitation Method Using Iron-III Chloride ........................................................................................................... 585 Yonga Levha Endüstrisi Atıksularından Elektrokoagülasyon Prosesi ile KOİ ve Renk Giderimi ........................................................................................................................ 586 COD and Color Removal by Electrocoagulation Process from Chipboard Industry Wastewater ................................................................................................................... 587 Samsun İlinde Bir Konutun Enerji İhtiyacının Rüzgar Enerjisi ile Karşılanması ........ 588 Satisfying with Wind Energy of Energy Demand of a Residence in Samsun Province ...................................................................................................................................... 589 Bingöl Şehit Mustafa Gündoğdu Caddesi Örneğinde Kamusal Alanlarda Otomobil Öncelikli Düzenleme Sorunsalı .................................................................................... 590 Problem Of Automobile Priotrity Arrangement In Public Areas, Example Of Bingol Sehit Mustafa Gundogdu Street .................................................................................... 591 Değişik Organik Preparatların Topraksız Tüplü Çilek Fidesi Yetiştiriciliği Üzerine Etkisi ............................................................................................................................. 592 The Effect Of Some Organic Compounds On Strawberry Plug Transplant Development in Soilless Conditions ................................................................................................... 593 Hormon, Mikroorganizma Ve Ozmotik Solüsyonların Turunçgil Anaç Tohumlarının Çimlenmesine Etkisi ..................................................................................................... 594
26
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Effects Of Hormone, Microorganism And Osmotic Solution Applications To Seed Germination Of Some Citrus Rootstocks ..................................................................... 595 Türkiye’de Hayvansal Üretim ve İklim Değişikliği Senaryoları.................................. 596 Scenarios for Precision to Future Climate Change and Animal Farming of Turkey ... 597 Piroliz Edilmiş Badem Kabuğu Kullanılarak, Metil Mavinin Sulu Ortamdan Adsorpsiyonu ................................................................................................................ 598 Adsorption of Methyl Blue from Aqueous Solution Using Pyrolyzed Pyrolyzed Almond Shell .............................................................................................................................. 599 Balkan Coğrafyasında Osmanlı Kültürel Mirasının Korunması Ve Sürdürülebilirliği; Tika’nın Çalışmaları*.................................................................................................... 600 The Protection And Sustainability Of The Ottoman Cultural Heritage In Balkan Geography; Tika's Studies*........................................................................................... 601 Yeni İletişim Teknolojileri Ve Sürdürülebilirlik Açısından Yerel Gazetelerde Değişim Ve Yöndeşme ............................................................................................................... 602 The Change-Convergence In Local Newspapers In Terms Of New Communication Technologies And Sustainability .................................................................................. 603 BDGG' de Elektron Taşıma Aracı Olarak Kullanılan Nb:TiO2' nin Artan Kalınlığı İle Fotovoltaik Performansının Analizi ............................................................................. 604 The Analyzing Photovoltaic Performance Changed With Increasing Thickness Of Nb:TiO2 Used As Electron Transport Mediator in DSSCs. ......................................... 605 Sol-Jel Metodu ile Farklı Sentez Koşullarında TiO2 örgüsüne Nb Geçiş Metalinin Katkılanması ................................................................................................................. 606 The Doping Nb Transition Metal in TiO2 Lattice At Different Synthesis Conditions With Sol-Gel Method ................................................................................................... 607 Yalvaç İlçesinde Bina İçi
Rn Konsantrasyonu Ölçümleri ....................................... 608
222
Indoor 222Rn Concentration Measurements in Yalvaç County ..................................... 609 Organik Yumurtaların Farklı Koşullarda Muhafazasının Yumurta Kalite Özellikleri Değişimine Etkisi ......................................................................................................... 610 The Effect of Different Storage Conditions on the Change of Egg Quality Traits of Organic Eggs ................................................................................................................ 611 Sürdürülebilirlik Kavramının Anlam Karmaşası; Sürdürülebilirlik Ne Anlama Geliyor? ...................................................................................................................................... 612 Complexity Of The Meaning Of The Term Sustainability; What Does It Mean? ....... 613
27
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürücüsüz Araba Devrimi Hakkında Sürdürülebilirlik Tartışması .............................. 614 Sustainability Discussion about the Driverless Car Revolution ................................... 615 Sürdürülebilir Mimarlık Kapsamında Karar Verme Araçlarının Çatı Seçiminde Uygulanabilirliğinin İrdelenmesi .................................................................................. 616 Examination Applicability of Decision Making Tools for Roof Selection Within Sustainable Architecture ............................................................................................... 617 Sağlık Harcamaları ve Ekonomik Kalkınma İlişkisi: Türk Devletleri Örneğı ............. 618 Health Expenditures And Economic Development Relation: The Case Of Turkish States ...................................................................................................................................... 619 Çok Kriterli Karar Verme Yöntemi ve CBS Kullanılarak Yerleşime Uygun Alanların Belirlenmesi: İzmir Kenti Örneği ................................................................................. 620 Multi - Criteria Decision Making Analysis in GIS for Land Use Suitability Analysis: The Case of Izmir City ................................................................................................. 621 Hava Kirliliği ve Kent İlişkisine Ampirik Bakış: Ekolojik Sürdürülebilirlik Ekseninde Bir Değerlendirme ........................................................................................................ 622 The Empirical Overview of the Relationship Between Air Pollution and City: An Assessment from the Perspective of Ecological Sustainability .................................... 623 Su Kaynaklarının Sürdürülebilirliği ve Korunumu ...................................................... 624 Sustainability and Conservation of Water Resources................................................... 625 Dış Ticaretin Sürdürülebilirliğinde “Marka”: Isparta İli Örneği .................................. 626 "Brand" in Sustainability of Foreign Trade: Isparta Province Case ............................. 627 Turunçgil Uzun Antenli Böceği Anoplophora chinensis (Forster,1771) (Coleoptera: Cerambycidae) ile Mücadele Olanakları ...................................................................... 628 Management Opportunities with Citrus Long-Horned Beetle Anoplophora chinensis (Forster, 1771) (Coleoptera: Cerambycidae) ................................................................ 629 Turunçgil Yeşillenme Hastalığı (HLB) Vektörleri Diaphorina citri Kuwayama (Hemiptera:Liviidae) ve Trioza erytreae Del Guercio (Hemiptera:Triozidae) ............ 630 Vectors of Citrus Greening Disease (HLB) Diaphorina citri Kuwayama (Hemiptera:Liviidae) and Trioza erytreae Del Guercio (Hemiptera:Triozidae) .......... 631 Katı Atık Yönetimi İçin Çok Kriterli Bir Karar Modeli: Türkiye İçin Bir Uygulama . 632 A Multi Criteria Decision Model For Solid Waste Management: A Case Of Turkey . 633
28
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürdürülebilir Kalkınma Faktörlerinin Analizi için Çok Kriterli Karar Modeli Önerisi ...................................................................................................................................... 634 A Multi-Criteria Decision Model Proposal for the Analysis of Sustainable Development Factors .......................................................................................................................... 635 Sürdürülmesi Zorunlu Bir Değer Olarak Çevre Etiği ................................................... 636 Environmental Ethics As A Mandatory Value To Be Sustained.................................. 637 Geleneğimizde Önemli Bir Değer Olarak Hoşgörü Kavramının Önemi ..................... 638 The Importance Of The Concept Of Tolerance As An Important Value In Our Tradition ...................................................................................................................................... 640 Türkiye’de Güneş Güç Kulesi Potansiyeli ve Uygulamaları ....................................... 642 Potential and Implementations of Solar Power Towers in Turkey............................... 643 Sürdürülebilir Çevre için Binalarda Yalıtım Uygulamasının Etkisi ............................. 644 The Impact of Insulation Implementation in Buildings For a Sustainable Environment ...................................................................................................................................... 645 Ekolojik Sürdürülebilirlik Kapsamında Binalarda Kullanılan Çevre Dostu Isı Yalıtım Malzemeleri ve Bunlara Bağlı Yenilenebilir Yakıt Tüketimi ...................................... 646 Environment-Friendly Heat Insulation Material Used in The Scope of Ecological Sustainability and Renewable Fuel Consumption Related to These Factors ............... 647 İstanbul-Silivri Muratçeşme Alanında Tarihi Çeşme İle Olası Kazı Yeri Arasındaki Bağlantının Jeofizik Yöntemlerle Araştırılması ........................................................... 648 Geophysical Investigation of Connection Between Historical Fountain And Excavation Area With Geophysical Techniques In Istanbul-Silivri Murat Cesme ......................... 649 Zaman Ortamı IP Yöntemiyle Jeotermal Arama .......................................................... 650 Geothermal Exploration By Time Domain IP .............................................................. 651 Sürdürülebilir Kalkınmada Ekolojik Sanayi Bölgelerinin Rolü: Ülke Örnekleri ve Türkiye İçin Değerlendirme ......................................................................................... 652 The Role of Ecological Industrial Zones in Sustainable Development: Country Examples and Evaluation for Turkey ........................................................................... 653 Mevcut Kütüphane Mekanlarının Yaşam Boyu Öğrenme Ortamları Olarak Yenilenmeleri Anadolu Üniversitesi, Üniversite Kütüphanesi Örneği ........................ 654 Renovation of Existing Library Spaces as A Life Long Learning Environment Anadolu University Library Example ......................................................................................... 656
29
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Mülteci Çocukların Eğitim Engelleri ........................................................................... 657 Education Barriers Of Refugee Children...................................................................... 659 Sürdürülebilirlik Açısından Keçi Lifleri ve Geleceği Üzerine Bazı Değerlendirmeler 661 Some Considerations on Goat Fibers and Their’s Future in Terms of Sustainability .. 662 Büyümenin Sınırları: Yeşil Alternatif .......................................................................... 663 The Limits of Growth: Green Alternative .................................................................... 664 Sürdürülebilirliğin Geliştirilmesi için Çamur Arıtma ve Uzaklaştırma Stratejileri ..... 665 Sludge Treatment and Disposal Strategies for Sustainable Development ................... 666 Ekolojik Evsel Atıksu Yönetimi (ECOSAN) Teknolojileri ......................................... 667 Ecological Domestic Wastewater Management (ECOSAN) Technologies ................. 668 Sürdürülebilir Gelişme için Sürdürülebilir Kentsel Teknolojiler ................................. 669 Sustainable Urban Technology for Sustainable Development ..................................... 670 Meslek Yüksekokulu Öğrencilerinin Çevre Etiği Konusundaki Yaklaşımlarının Belirlenmesi .................................................................................................................. 671 Determination of Environmental Ethics Approach of Vocational High School Students ...................................................................................................................................... 672 Siyaset Bilimi ve Kamu Yönetimi Öğrencilerinin Çevre Etiği ve Mevzuatları Konusundaki Yaklaşımlarının Değerlendirilmesi ........................................................ 673 Evaluation of the Approaches of the Students of Political Science and Public Administration on Environmental Ethics and Legislation ........................................... 674 Türk Yurdunda Bilim: Kadim Türk Uygarlıklarının Zaman Ölçüm Yöntemlerinin Bilgisayar Destekli Simülasyonla Tespit Edilmesi ...................................................... 675 Science in Turkish Yurd (Tent): The Discovery of Time Measuring Methods of Old Turkish Civilizations with Computer Aided Simulation .............................................. 676 Borsa İstanbul Aile İşletmeleri Endeksi Performans Analizi ....................................... 677 Borsa Istanbul Family Business Index Performance Analysis ..................................... 678 Kırgızistan’ın Calal Abad Bölgesi Kara-Alma Ceviz Ormanında Seleksiyon Çalışmaları ...................................................................................................................................... 679 Selection Studies on Kara-Alma Walnut Forest in Zhalal Abad of Kyrgyzstan .......... 680
30
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Ekonomik ve Ekolojik Sürdürülebilirlik İçin Önerilen Mali Politikalara Eleştirel Bir Bakış ............................................................................................................................. 681 A Critical Look at the Fiscal Policies Recommended for Economic and Ecological Sustainability ................................................................................................................ 682 Türkiye’de STK’ların Yeşil Politika Önerileri: Yeşil Düşünce Derneği ve TÜSİAD Örnekleri ....................................................................................................................... 683 Green Policy Recommendations of NGO’s in Turkey: Green Thought Association and TÜSİAD Examples ....................................................................................................... 684 Kırsal Yerleşim Bölgelerinde Sürdürülebilirlik: Çünür Yerleşimi/Isparta................... 685 Sustainability in Rural Settlement Regions: Çünür / Isparta ........................................ 686 Sürdürülebilir Kentsel Gelişmede Bütünleşik Ulaşım Planlamasının Önemi-Konya Raylı Sistem Örneği ..................................................................................................... 687 The Significance Of Integrated Transportation Planning For Sustainable Urban Development-The Konya Rail System Sample ............................................................ 688 Sürdürülebilir Ulaşımın Sosyal Boyutunda Eşitliğin Önemi-Konya Örneği ............... 689 Significance Of Equality In The Social Dimension Of Sustainable TransportationKonya Sample .............................................................................................................. 690 Daha Temiz Deri Üretimi; Kireç Ve Sülfür İçermeyen Kıl Giderme Ve Kireçlik İşlemi ...................................................................................................................................... 691 Cleaner Leather Production; Lime And Sulfide Free Dehairing And Liming Process 692 Çevre Dostu Krom Tabaklama; Transglutaminaz Enzimi İle Atık Krom Minimizasyonu ...................................................................................................................................... 693 Eco-Friendly Chrome Tanning; Waste Chrome Minimization By Transglutaminase Enzyme ......................................................................................................................... 695 Bolu Ekolojisinde Sprey Karanfil Yetiştiriciliğinin Belirlenmesi ................................ 697 Determination of Spray Carnation Growth in Bolu Ecology ....................................... 698 UV-Spektroskopisi İle İkili İlaç Karışımlarının İstatistiksel Analizi ........................... 699 Statistical Analysis Of Drug Combination By UV-Spectroscopy ................................ 700 Parasetamol, Asetilsalisilik Asit Ve C Vitamini İlaç Maddelerinin Çoklu Doğrusal Regresyon İle Tayini .................................................................................................... 701 Paracetamol, Acetylsalicylic Acid and Vitamin C Drugs With Multiple Linear Regression .................................................................................................................... 702
31
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Türkiye Besi İşletmeleri Sürdürülebilirliğinde Teknolojik Gelişmelerin Katkısı ........ 703 The Technologic Development Effects on Turkish Fattening Enterprises Sustainability ...................................................................................................................................... 704 Türkiye Süt Sığırcılığı İşletmelerinde Sürdürülebilir Süt Sığırcılığı Döl Verimi Yönetiminde Teknoloji Kullanımı ............................................................................... 705 The Technology Usage at Turkish Dairy Farms to Sustainable Reproductive Perfomances.................................................................................................................. 706 Yaşanabilir Şehirler için Sürdürülebilirlik ve Sürdürülebilir Gelişme ......................... 707 Sustainability and Sustainable Development for Livable Cities .................................. 708 Sürdürülebilir Mimari Kapsamında Geliştirilen Teknoloji ve Ürünler ........................ 709 Technologies and Products Developed in the Context of Sustainable Architecture .... 710 Sürdürülebilir Mimari Kapsamında Yenilikçi Bina Kabuğu Tasarımları .................... 711 Innovative Building Design in Scope of Sustainable Architecture .............................. 712 Sürdürülebilirliğin Algılanması ve Uygulanması: Türkiye’deki İşletmelere Dönük Bir Değerlendirme .............................................................................................................. 713 Perception and Implementation of Sustainability: An Assessment Regarding Turkish Companies .................................................................................................................... 714 Türkiye’de Kadın Girişimciliğinin Sürdürülebilirliği .................................................. 715 Sustainability of Women Entrepreneurship in Turkey ................................................. 716 Isparta’da Sermayenin Gözünden Mermercilik Sektörünün Sürdürülebilir Kalkınma Sorunsalı ....................................................................................................................... 717 The Sustainable Development Problem in the Eye of Marble Capital Sector in Isparta ...................................................................................................................................... 718 Kültürel Sürdürülebilirlik Açısından Isparta Üzüm Pazarı .......................................... 719 Isparta Üzüm Pazarı in Terms of Cultural Sustainability ............................................. 720 Romaika Konuşan Toplulukta Göç Olgusu Üzerinden, Konut Tasarımında Yerel; Doğal Ve Kültürel Veri Etkisini İncelemek İçin Bir Model Önerisi ...................................... 721 A Model Proposal for Investigating The Effects of Local; Natural and Cultural Data in Housing Design on Migration of the Romaika Speaking People ................................. 723 Türkiye’de Çevresel Kuznets Eğrisi: ARDL Sınır Testi Yaklaşımı ............................ 725
32
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Environmental Kuznets Curve in Turkey: ARDL Bound Test Approach.................... 726 Otoparklarda Kullanılan Yeni Teknolojilerin Türkiye’de Uygulanabilirliğinin Araştırılması ................................................................................................................. 728 Investigation of Applicability of New Technologies Used in the Parking Lots in Turkey ...................................................................................................................................... 729 Hastane Projelerinin Otopark Planlamasında Dikkate Alınacak Hususların İncelenmesi ...................................................................................................................................... 730 Examination of Issues to be Considered in the Parking Lot Planning of Hospital Projects ...................................................................................................................................... 731 Ülkemizde Sürdürülebilir Turizmde Kültür Felsefesinin Rolü .................................... 732 The Role of Culture Philosophy in Sustainable Tourism in Our Country ................... 733 Sakin Şehir Yalvaç Örneğinde Sürdürülebilirlik, Sakin Şehirler Ve Toplumsal Katılım ...................................................................................................................................... 734 Sustainability, Cittaslow and social Participation in case of Cittaslow Yalvaç ........... 735 Multi-Criteria Decision-Making For Selection Of Environmentally Friendly Supplier ...................................................................................................................................... 736 Multi Criteria Decision Making For Selection Of Renewable Energy Sources ........... 737 Mobilya Endüstrisinde Tamir Bakımın Önemi ve Bir Uygulama ................................ 738 The Importance of Repair Maintenance in Furniture Industry and an Application ..... 739 Türkiye’de Doğal Taş Sanayinin Coğrafi ve Ekonomik Sürdürülebilirliği ................. 740 Geographic and Economical Sustainability of Natural Stone-Marble Industry in Turkey ...................................................................................................................................... 741 Karayemişin (Prunus Laurocerasus L.) Farklı Ortamlarda Köklenmesi Üzerine Bir Araştırma ...................................................................................................................... 742 A research on Rooting of Cherry Laurel (Prunus Laurocerasus L.) in Different Medias ...................................................................................................................................... 743 Tarım İşletmelerinde Çevresel, Ekonomik ve Sosyal Sürdürülebilirliğin Ölçülmesi .. 744 Measuring Environmental, Economic and Social Sustainability at the Farm Level .... 745 Üniversite-Sanayi İşbirliğinin Öğrenci Bakış Açısıyla Değerlendirilmesi .................. 746 Evaluation of Perspective of Students with University-Industry Collaboration .......... 747
33
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Yeniden Yapılandırılabilir Üretim Sistemleri için Literatür Araştırması ..................... 748 Reconfigurable Manufacturing Systems Literature Review ........................................ 749 Sürdürülebilirlik Açısından Yağmur Hendekleri ......................................................... 750 Swales in Terms of Sustainability ................................................................................ 751 Kültürel Sürdürülebilirlik: Arkeolojik, Mekânsal ve Toplumsal Bilimlerde Disiplinlerarası Bir Yöntem İmkânının Sorgulanması ................................................. 752 Cultural Sustainability: Questioning The Possibility Of An İnterdisciplinary Method of Archeology, Urban And Social Sciences ..................................................................... 753 Sürdürülebilir Kentsel Gelişmenin Uygulama Aracı Olarak SymbioCity Yaklaşımı .. 754 SymbioCity Approach as an Implementation Tool for Sustainable Urban Development ...................................................................................................................................... 755 Yerel Kimliğin Sürdürülebilirliğinde Yavaş Şehir (Cittaslow) Hareketinin Rolü ....... 756 The Role Of Cittaslow Movement For Sustaining Local Identity ............................... 757 Ticari Ürünlerdeki Bazı Azo Renklendiricilerinin ICA-ANN Kemometrik Yöntemiyle Aynı Anda Tayini ......................................................................................................... 758 Simultaneous Determination Of Some Azo Colorants In Commercial Products By ICAANN Chemometric Methods ........................................................................................ 759 Kurumlar ve Ekolojik Sürdürülebilirlik: Gelişmekte Olan Ülkeler Üzerine Bir Analiz ...................................................................................................................................... 760 Institutions and Ecological Sustainability: An Analyse on Developing Countries ...... 761 Çamoluk Örneğinde Sürdürülebilir Yaylacığın Coğrafi Analizi .................................. 762 Geographical Analysis Of Sustainable Transhumance In Case Of Çamoluk .............. 763 Manavgat İlçesi’deki Turistik Çekiciliklerin Sürdürülebilir Turizm Açısından Değerlendirilmesi ......................................................................................................... 764 Evaluation Of Tourist Attractions In Manavgat District In Terms Of Sustainable Tourism......................................................................................................................... 765 Sürdürülebilir Tarımın Manavgat Ekonomisindeki Yeri Ve Önemi ............................ 766 The Place And Importance Of Sustainable Agriculture in The Manavgat Economy .. 767 Ütopya Türü Eserlerde Çevre Eleştirisi Ve Çevrenin Sürdürebilirliği ......................... 768 Environmental Reviews And Environmental Sustainability In The Utopias ............... 769
34
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Atık Plastiklerin Biyo-Bozunum Çalışmaları ............................................................... 770 Studies of Biodegradation at Waste Plastics ................................................................ 771 Türkiye’de Kültürel Miras Yönetimi’ne İlişkin Düzenlemelerin Sürdürülebilir Kalkınma Hedefleri Açısından İrdelenmesi .................................................................................. 772 A Study Concerning the Legislation on Cultural Heritage Management in the Context of the Sustainable Development Goals in Turkey ............................................................ 773 Ters Faz Sıvı Kromatografi Metodu ile Lösemi Tedavisinde Kullanılan 6-Tioguaninin iyonlaşma ve Protonasyon sabitlerinin Tayini.............................................................. 774 Determination of Ionization and Protonation Constants of 6-Thioguanine used in The Treatment of Leukaemia With Reversed Phase Liquid Chromatography Method ...... 775 Asetonitril-Su İkili Karışımlarında 6-Merkaptopürinin Kromatografik Davranışının İncelenmesi ................................................................................................................... 776 Investigation of Chromatographic Behaviour of 6-Mercaptopurine in Acetonitrile-Water Binary Mixtures ............................................................................................................ 777 Artan Miktarlarda Mikoriza Uygulamalarının Bebek Havuç (Daucus carota L.) Bitkisinin Bazı Makro Element Beslenmesi Üzerine Etkileri ...................................... 778 The Effects of Increasing Mycorrhiza Application on Some Macro Element Nutrition of Baby Carrots (Daucus carota L.) Plant ........................................................................ 779 Artan Miktarda Bor Uygulamasının Yaygın Fiğ (Vicia sativa L.) Bitkisinde Bazı Makro Besin Elementleri İçeriğine Etkisi ................................................................................ 780 The Effect of Increased Boron Applications on Some Macro Nutrient Elements Contents in Common Vetch (Vicia sativa L.) Plant ..................................................... 781 Sertakonazolün Dermatolojik Formülasyonunda Tayini İçin RP-HPLC-UV Metodunun Optimizasyonu ve Validasyonu .................................................................................... 782 Optimization and Validation of RP-HPLC-UV Method for Determination of Sertaconazole in Dermatological Formulation ............................................................. 783 Lanokonazolün İnsan İdrarında Ters Faz Sıvı Kromatografik Tayini ......................... 784 Reversed Liquid Chromatographic Determination of Lanoconazole in Human Urine 785 Yapay Sinir Ağları ile Türkiye için Sektörel Net Elektrik Tüketimi Tahmini ............. 786 Estimation of Turkey’s Sectoral Net Electricity Consumption by Artificial Neural Networks ....................................................................................................................... 787 Parasetamol-metaklopramid kombinasyonunun Çoklu Doğrusal Regresyon İle Tayini ...................................................................................................................................... 788
35
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Multi-Linear Regression of Paracetamol-metaclopramide Combination ..................... 789 Sunset Yellow ve β-karoten Renk Maddelerinin Çoklu Doğrusal Regresyon İle Tayini ...................................................................................................................................... 790 Multi-Linear Regression of Sunset Yellow and β-Carotene Food Colorants............... 791 Examining The Factors Responsible For The Variation In Accessibility To Health Care Facilities - Ghana .......................................................................................................... 792 Burdur Kentsel Koruma Alanında Açık-Yeşil Alanların Rolü .................................... 793 The Role of Open-Green Areas in Burdur Urban Conservation Area ......................... 794 Bir Pasif Ev Tasarımı ve Rize İklim Şartlarında Standart Evlerle Karşılaştırılması .... 795 A Passive House Design And Comparison With Standard Houses İn Rize Climate Conditions..................................................................................................................... 797 Güneş ve Rüzgâr Enerjisi Teknolojilerinin İncelenmesi Ve Rize İline Uygulanabilirliklerinin Değerlendirilmesi ................................................................... 799 Investigation of Solar and Wind Energy Technologies and Evaluation of Applicabilitiy of Rize .......................................................................................................................... 800 Kovada Gölü Zooplanktonunun Mevsimsel ve Ekolojik Olarak İncelenmesi ............. 801 Seasonal and Ecological Investigation of Zooplankton in Kovada Lake ..................... 802 Ortak Mallar ve Ekolojik Sürdürülebilirlik .................................................................. 803 Common Goods and Ecological Sustainability ............................................................ 804 Kentlerin Tarihsel Sürdürülebilirliğinde Kültürel Miras: Önemi ve Değeri Üzerine Düşünmek ..................................................................................................................... 805 Nilüfer NEGİZ1,* .......................................................................................................... 805 1
SDÜ İİBF SBKY Bölümü Öğretim Üyesi .................................................................... 805
*
Sorumlu yazar e-posta:
[email protected] ....................................................... 805
Cultural Heritage In Historical Sustainability Of Cities: Thinking About Importance And Value ..................................................................................................................... 806 Nilüfer NEGİZ1,* .......................................................................................................... 806 1
SDÜ İİBF SBKY Bölümü Öğretim Üyesi .................................................................... 806
*
Responsible author e-mail:
[email protected] ................................................. 806
36
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Multı-Crıterıa Decısıon-Makıng For Selectıon of Envıronmentally Frıendly Supplıer 807 Multı Crıterıa Decısıon Makıng For Selectıon of Renewable Energy Sources ............ 808 Sağlık Kurumlarında Kalite Yönetim Algısının Sürdürülebilirliğinin Kültürel Açıdan Karşılaştırılması: IRAK-TÜRKİYE Örneği ................................................................. 809 Cultural Comparıson of the Sustaınabılıty of Qualıty Management Perspectıve in Health in Health Care Organızatıons: IRAQ-TURKEY Example ........................................... 811 Havalimanı Karbon Akreditasyonu Süreci Uygulamalarının İyileştirilmesinde Hata Türü ve Etkileri Analizinin Kullanılması Üzerine Bir Araştırma ................................ 812 A Research on Usıng Faılure Modes and Effects Analysıs To Improve Aırport Carbon Accredıtatıon Process Applıcatıons .............................................................................. 814 Tekstil ve Modada Sürdürülebilirlik ............................................................................ 815 Sustainability in Textile and Fashion ........................................................................... 816
37
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Knowledge Sources and Cooperation Networks of Kiwi Growers in Samsun Province of Çarşamba District, Turkey Nur İlkay ABACI1* , Selime Canan2, Mehmet AYDOĞAN3 ve Kürşat DEMİRYÜREK4 1
Ondokuz Mayis University, Samsun, Turkey Ondokuz Mayis University, Samsun, Turkey 3 Blacksea Agricultural Research Institute, Samsun, Turkey 4 Ondokuz Mayis University, Samsun, Turkey *Responsible author e-mail:
[email protected] 2
Abstract In this research, it was aimed that innovation systems kiwi growers farming and located actors in this system to determine. For this purpose in the survey, the interview data from made of with 49 grower kiwi has been used. Data were analyzed using social network analysis in order to present visually how the spread of kiwi farming and the role of actors, which is important in this regard. It has been revealed that Çarşamba district started cultivation of kiwi with encouraging producers by kiwi plant distribution of Çarşamba Food, Agriculture and Livestock Directorate. Firstly, leaders of farmers have been experimenting for kiwi production. After determining that the kiwi was profitable product, production started to be adopted by other farmers. It was determined that medicine, fertilizer and seed dealers is another important actor in the spread of Kiwi farming. Reliance on distributors of growers is very large and they are consulting with dealers on almost any subject in the district. Growers provides the Kiwi saplings from outside the province. Mostly they are marketing their product to Adana, Mersin and Antalya province. The most important problems of the growers, it is a new product in the area of kiwi fruit and producers are not yet have enough information about kiwi fruit. To complete the lack of knowledge of farmers, the information they need to be ensured by research institutes and universities in regions where intensive production of kiwi fruit. In addition, besides the kiwi fruit, peach, apple, pear, etc. are produced in Çarşamba district, if they can create their own organization which located cold storage, it will be possible they can get more revenue from the production of kiwi fruit. Also, it is thought to be useful to pass on good agricultural practices. Key words: Kiwi fruit, innovation, information resources, social network.
38
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürdürülebilir Sosyal Kalkınmada Güncel Bir Tartışma: Çocuğa Yönelik Cinsel İstismarı Yeniden Düşünmek Abdullah IŞIK1,*, Cemre BOLGÜN2 Sinop Üniversitesi, Sinop, Türkiye Hacettepe Üniversitesi, Ankara, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2
Özet Son yıllarda çocuklara yönelik ihmal ve istismar vakaları giderek artmakta, çocuğa yönelik cinsel istismar vakaları ise bu anlamda büyük bir yer tutmaktadır. Çocukluk dönemi, cinsel gelişim ve farkındalığının henüz tamamlanmadığı bir evredir. Dolayısıyla bu dönemde yaşanacak herhangi bir istismar eyleminin kritik sonuçları olabilmektedir. Cinsel istismar, çocuklarda uzun süreli duygusal ve davranışsal etkilere, korku, depresyon, kızgınlık, düşmanlık ve uygunsuz cinsel davranışlara yol açmaktadır. Bununla birlikte, böylesi bir eylemin çocuğun yakınları ya da güven geliştirdiği biri tarafından gerçekleştirilmesi ise sürecin çocuk için daha şiddetli ve daha yıkıcı bir hal almasına sebep olabilmektedir. Sosyal kalkınma ve sürdürülebilirlik açısından söz konusu süreçler, bireye doğrudan etkilerinin yanı sıra, toplumsal hayatı da çeşitli biçimlerde etkilemektedir. Bu noktada, toplumsal yaşamda, sürdürülebilir kalkınmanın temel taşlarını oluşturan çocukların, cinsel istismarı tanımlama veya gösterme yeteneğinde olduklarına inanılmalı ve profesyonel kişilerden destek alınmalıdır. Bütün bu çerçeve göz önüne alındığında, sürdürülebilir sosyal kalkınma sürecinde çocuklara yönelik cinsel istismar konusu, üzerinde durulması ve özel olarak ele alınması gereken bir alan olarak ortaya çıkmaktadır. Bu çalışmanın amacı, çocuğa yönelik cinsel istismarı sürdürülebilir sosyal kalkınma bağlamında ele almak ve tartışmaya açmaktır. Böylece, mevcut sorun ve ihtiyaçların belirlenmesi ve bunlara çözüm üretilmesi adına ortam hazırlanabileceği düşünülmektedir. Bu bağlamda öncelikle, Türkiye’de sürdürülebilir kalkınma adına çocuğa yönelik cinsel istismar konusundaki mevcut politika ve uygulamaların tartışılması gerekmektedir. Sonuç olarak, istismar olgusuna ilişkin olarak Türkiye’de sosyal politika ve uygulamaların yeterli olmadığı düşünülmektedir. Bu kapsamda sürdürülebilir sosyal kalkınma yolunda çocuğa yönelik cinsel istismar konusunda çalışmaların arttırılması ihtiyacı söz konusudur. Bu çerçevede istismar konusunun ise çok boyutlu olarak ele alınması gerektiği düşünülmektedir. Özellikle son zamanlarda yaşanan gelişmelerle birlikte toplumsal kalkınma ve sosyal politika alanlarında güncel bir tartışma olan çocuğa yönelik cinsel istismarı yeniden düşünme ihtiyacının daha da arttığı düşünülmektedir. Anahtar kelimeler: Sürdürülebilir sosyal kalkınma, Çocuğa yönelik cinsel istismar, Sosyal hizmet uygulamaları, Sürdürülebilir sosyal politikalar.
39
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
A Current Discussion on Sustainable Social Development: Rethinking the Sexual Abuse Against Children Abdullah IŞIK1,*, Cemre BOLGÜN2 1
Sinop University, Sinop, Turkey Hacettepe University, Ankara, Turkey *Responsible author e-mail:
[email protected] 2
Abstract In recent years, cases of neglect and abuse against children have been increasing, while cases of sexual exploitation against children have a great part in this. Childhood is a state in which sexual development and awareness is not yet completed. Therefore, any act of abuse in this period can have critical consequences. Sexual abuse leads to longterm emotional and behavioral effects, fear, depression, anger, hostility and inappropriate sexual behavior on children. Moreover, the fact that such an action is undertaken by relatives of the child or someone that the child has developed confidence can lead child to a more severe and more destructive process. In terms of social development and sustainability, beside the direct effects on individual, this processes also effect the social life in various ways. At this point, children who are the cornerstones of sustainable development in social life must be believed to be capable of identifying or showing sexual abuse, and should be supported by professionals. Given the whole framework, sexual abuse of children in the sustainable social development process emerges as an area that needs to be addressed in particular. The aim of this study is to address and discuss the sexual abuse of children in the context of sustainable social development. Thus, it is thought that an environment can be prepared in order to determine existing problems and needs, and to produce solutions. In this context, first of all, it is necessary to discuss the existing policies and practices on child sexual abuse in the frame of sustainable development in Turkey. As a result, it is considered that social policies and practices in Turkey are not sufficient for the case of abuse. In this context, to create sustainable social development, there is a need for studies on child sexual abuse. The issue of abuse in this frame should be handled as multi-dimensional. It is thought that the need to rethink sexual abuse of children, which is a current debate in social development and social policy areas, is increased. Key words: Sustainable social development, Sexual abuse against children, Social work practices, Sustainable social policies.
40
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Yeni Yoksulluk Konsepti İçin Sürdürülebilir Sosyal Politika Önlem ve Öncelikleri Abdullah IŞIK1,*, İsmail SEVİNÇ2 Sinop Üniversitesi, Sinop, Türkiye Necmettin Erbakan Üniversitesi, Konya, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2
Özet Tarihsel süreç boyunca yaşanan ekonomik, politik ve sosyolojik dönüşümler neticesinde; yoksulluk, insanlığın önemli bir sorunu haline gelmiştir. Özellikle sanayileşmeyle birlikte hortlayan yoksulluk sorunu, günümüzde küresel ekonomi ve kitlesel göçler ile birlikte çok farklı bir boyut kazanmıştır. Bu bağlamda günümüz yeni yoksulluk konsepti, birçok devlet için yeni ve sürdürülebilir sosyal politika önlem ve önceliklerini gerekli kılmıştır. Bu anlamda günümüz toplumlarının yoksullukla mücadelede etkili ve nitelikli politika üretmeleri kaçınılmaz olmaktadır. Bütün bu çerçeve göz önüne alındığında sosyal dışlama/dışlanmaya ve açlık sorununa sebep olan yeni yoksulluk konsepti ile mücadelede sürdürülebilir sosyal politika önlem ve öncelikleri, üzerinde durulması ve özel olarak ele alınması gereken bir alan olarak ortaya çıkmaktadır. Bu çalışmanın amacı, yeni yoksulluk konsepti için belirlenecek sürdürülebilir sosyal politika önlem ve önceliklerinin neler olduğunu ve bu politikaların nasıl uygulanacağını tartışmaya açmaktır. Bu bağlamda mevcut sorun ve ihtiyaçların belirlenmesi ve bunlara çözüm üretilmesi adına ortam hazırlanabileceği düşünülmektedir. Türkiye’de yoksullukla mücadelede mevcut sosyal politika ve uygulamaların, sosyal hizmet ve sosyal yardım uygulamalarının olduğu açıktır. Ancak dönüşen dünyanın ürettiği yeni sorun alanları içerisindeki yeni yoksulluk sorunu için daha etkili, nitelikli ve verimli politika ve uygulamaların tartışılması gerektiği ortadadır. Özellikle küresel gelişmelerle birlikte konuyla ilgili ihtiyacın daha da arttığı düşünülmektedir. Sonuç olarak, Türkiye’de yoksullukla mücadelede yeni dünya düzeninin ve kitlesel göç hareketlerinin göz önünde bulundurulması gerekmektedir. Bu kapsamda, belirlenecek sürdürülebilir sosyal politika önlem ve önceliklerinin yeni yoksulluk konsepti bağlamında ele alınması ve konu hakkında çalışmaların arttırılması ihtiyacı söz konusudur. Bu çerçevede konunun çok boyutlu olarak ele alınması gerektiği düşünülmektedir. Anahtar kelimeler: Sürdürülebilir sosyal politika, Yeni yoksulluk konsepti, Kitlesel göç hareketleri.
41
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sustainable Social Policy Measures and Priorities for New Concept of Poverty Abdullah IŞIK1,*, İsmail SEVİNÇ2 1
Sinop University, Sinop, Turkey Necmettin Erbakan University, Konya, Turkey *Responsible author e-mail:
[email protected] 2
Abstract As a result of the economic, political and sociological transformations experienced during the historical process; poverty has become an important problem for humanity. The problem of poverty which rised especially after industrialization, has gained a very different dimension with the effect of global economy and mass migrations. In this context today's new concept of poverty has required new and sustainable social policy measures and priorities for many states. In this sense, it is inevitable for today's societies to produce effective and qualified policies in combating poverty. Considering this whole framework, sustainable social policy measures and priorities in the fight against new concept of poverty, which leads to social exclusion and hunger, are emerging as an area to be emphasized and specifically addressed. The aim of this study is to discuss what are sustainable social policy measures and priorities to be determined for the new poverty concept and how will these policies be practiced. In this context, it is considered that existing problems and needs can be determined and an environment can be prepared for the solution of these problems. It is clear that there are some social policies and practices, social services and social work practices in order to fight against poverty in Turkey. However, it is thought that more effective, qualified and productive policies and practices should be discussed for the new poverty issue in the new problem areas produced by the changing world. Especially with the global developments, the need for this issue has increased even more. As a result, it is thought that the new World order and so the mass migration movements should be taken into consideration in struggling against poverty in Turkey. In this context, there is a need for studies focusing on the new concept of poverty about the sustainable social policy measures and priorities. In this framework, it is thought that this issue should be considered as multi-dimensional ways. Key words: Sustainable social policy, New concept of poverty, Mass migration movements.
42
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Milli Park Sınırları İçinde Yaşamak: Kovada Gölü Ve Kızıldağ Milli Parkları Örneği İsmail KERVANKIRAN1, Adile Gül ERYILMAZ2 Süleyman Demirel Üniversitesi, Isparta, Türkiye Süleyman Demirel Üniversitesi, Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2
Özet Milli parklar, en önemli doğal miras alanlarından biri olup, korunan alan düşüncesinin temelini oluşturması bakımından önem taşımaktadır. Özellikle milli parkların ve diğer korunan alanların sürdürülebilir kullanım ve yönetim doğrultusunda planlanması, bu mekânlara daha hassas yaklaşılmasını ve bütün etkenlerin dikkate alınmasını gerekli kılmaktadır. Bu bakımdan milli parkların çevresinde yaşayan ve ev sahibi olarak nitelendirilen yerel halkın, gerek kullanımda gerekse yönetim ve planlamada görüşlerine başvurmak gerekmektedir. Bu doğrultuda çalışmanın amacı; Isparta ilinde yer alan Kovada Gölü ve Kızıldağ Milli Parkları sınırlarında yer alan köylerde yaşayan yerel halkın, milli parklara yönelik bakış açılarını değerlendirmektir. Çalışmada yöntem olarak, nitel araştırma yöntemlerinden yarı yapılandırılmış ve derinlemesine görüşme teknikleri uygulanmıştır. Çalışmanın bulgularına göre; Kovada Gölü ve Kızıldağ Milli Parkları çevresinde yaşayan yerel halkın, milli parkın ne olduğu, neden milli park olarak ilan edildiği ve milli parkların neyi korudukları konusunda yeterli bilgiye sahip olmadıkları, dolayısı ile benimseyemedikleri sonucu ortaya çıkmıştır. Bu sonucun en önemli nedenleri arasında milli park yöneticilerinin yerel halkla gerektiği gibi iletişime geçmemesi ve halkın yeterince bilgilendirilmemesi gösterilebilir. Çalışmada çıkan diğer bir sonuç ise, Kovada Gölü ve Kızıldağ Milli Parkı sınırlarına daha yakın köylerde yaşayan köylülerin çeşitli nedenlerle milli parklara yönelik tutumlarının olumsuz yönde olduğu, buna karşılık, milli park sınırlarından daha uzakta yer alan köylerde ise olumsuz etkilerin giderek azaldığıdır. Anahtar kelimeler: Milli Park, Yerel Halk, Isparta, Sürdürülebilir Kullanım.
43
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Living In National Park Borders: Examples Of Kovada Lake And Kızıldag National Parks Adile Gül ERYILMAZ 1,*, İsmail KERVANKIRAN2 Süleyman Demirel University, Isparta, Turkey Süleyman Demirel University, Isparta, Turkey *Responsible author e-mail:
[email protected] 1 2
Abstract National parks are one of the most important natural heritage sites and are vital for the protected area in terms of the basis of thought. Especially the planning of national parks and other protected areas in line with sustainable use and management necessitates a more precise approach to these spaces and takes all factors into account. In this respect, it is necessary to refer to the opinions of the local people who live around the national parks, whether they are in use or in management and planning. The aim of working in this direction, is to evaluate the views of the local people living in the villages of Kovada Lake and Kızıldağ National Parks in the province of Isparta towards the national parks. In this research, semi-structured and in-depth interviewing techniques are applied from qualitative research methods. According to the findings of the study, the local people living in the vicinity of Kovada Lake and Kızıldağ National Parks have come to a conclusion that they do not have enough information about what the national park is, why and it is declared as a national park and also what national parks protect it. One of the most important reasons for this result is that national park managers do not communicate properly with the local people and that the public is not adequately informed. Another result of the study is that the villagers living in villages closer to the borders of Kovada Lake and Kizildag National Park have negative attitudes towards national parks for various reasons while the negative effects are gradually decreasing in the villages located farther from national park borders. Key words: National Park, Local People, Isparta, Sustainable Use.
44
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Ziyaretçilerin Milli Parklara Yönelik Yaklaşımlarının Faktör Analizi Lıvıng In Natıonal Park Borders: Examples Of Kovada Lake And Kızıldag Natıonal Parks Adile Gül ERYILMAZ 1,*, İsmail KERVANKIRAN2 1Süleyman Demirel University, Isparta, Turkey 2Süleyman Demirel University, Isparta, Turkey *Responsible author e-mail:
[email protected]
Abstract National parks are one of the most important natural heritage sites and are vital for the protected area in terms of the basis of thought. Especially the planning of national parks and other protected areas in line with sustainable use and management necessitates a more precise approach to these spaces and takes all factors into account. In this respect, it is necessary to refer to the opinions of the local people who live around the national parks, whether they are in use or in management and planning. The aim of working in this direction, is to evaluate the views of the local people living in the villages of Kovada Lake and Kızıldağ National Parks in the province of Isparta towards the national parks. In this research, semi-structured and in-depth interviewing techniques are applied from qualitative research methods. According to the findings of the study, the local people living in the vicinity of Kovada Lake and Kızıldağ National Parks have come to a conclusion that they do not have enough information about what the national park is, why and it is declared as a national park and also what national parks protect it. One of the most important reasons for this result is that national park managers do not communicate properly with the local people and that the public is not adequately informed. Another result of the study is that the villagers living in villages closer to the borders of Kovada Lake and Kizildag National Park have negative attitudes towards national parks for various reasons while the negative effects are gradually decreasing in the villages located farther from national park borders. Keywords: National Park, Local People, Isparta, Sustainable Use.
45
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
An Integrated AHP-GRA Approach For Green Car Selection Problem Elif ÖZGÖRMÜŞ1,*, Ahmet Alp ŞENOCAK1, Hacer GÜNER GÖREN1 1
Pamukkale University, Department of Industrial Engineering, Denizli, Turkey *Responsible author e-mail:
[email protected]
Abstract Car selection problem is one of the most common and ordinary decisions of human life. Everybody is faced with this decision at least one time or many of us has a habit of following the auto market. There are many factors such as price, reliability, safety, fuel consumption, performance and design. In today’s environmental conscious world, a new criteria: emissions of CO2 should also be considered. Cars make a significant contribution to overall emissions of CO2. The CO2 and water are the main by-products, when petrol, diesel or certain alternative fuels are burnt for energy in an engine. Although it is not directly harmful to human health, is the most significant of the greenhouse gases contributing to climate change. Climate change, in other words, global warming, is considered to be one of the greatest environmental threats facing the world today. For these reasons, this paper aims to present a real world problem to select the most appropriate car for a middle class consumer. An integrated Analytic Hierarchy Process (AHP) based Grey Relational Analysis (GRA) approach is developed for car selection problem by considering the both economical and green factors. Different brand and model alternatives are evaluated. In conclusion, by evaluating different model and alternatives, the most suitable car for the consumer is selected analytically and easily. Key words: Green car selection problem, AHP, GRA.
46
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Yeşil Sipariş Belirleme Problemi için MACBETH ve Bulanık Çok Amaçlı Doğrusal Programlama Tabanlı Bütünleşik Bir Yaklaşım Ahmet Alp ŞENOCAK1,*, Hacer GÜNER GÖREN1 Pamukkale Üniversitesi, Endüstri Mühendisliği Bölümü, Denizli, Türkiye *Sorumlu yazar e-posta:
[email protected]
1
Özet Tedarik zinciri ağ tasarımının ilk aşaması olarak kabul edilen tedarikçi seçimi ve sipariş belirleme, işletmelerin tedarikçilerle etkileşim kurduğu, onları değerlendirdiği ve onlardan sipariş verdiği bir süreçtir. Hammadde ve bileşen maliyetlerinin ürün fiyatının %70’ine ulaşabildiği düşünüldüğünde, satın alma bölümleri işletmelerin karlılıklarında etkisi olan en önemli bölümlerden biridir. Son zamanlarda, doğal kaynakların tahrip edilmesi, hükümetlerce yürürlüğe konulan yeni düzenlemeler ve müşterilerin artan baskıları sonucunda, firmalar çevresel konulara daha fazla önem vermeye başlamışlardır. “Yeşil” kavramının önem kazanmasıyla beraber işletmeler süreçlerini çevresel kriterlere göre gözden geçirerek yeniden düzenlemeye başlamışlardır. Sözü edilen düzenlemeler yeşil satın alma, yeşil üretim, yeşil dağıtım ve yeşil tersine lojistik gibi tedarik zincirinin her aşamasında gerçekleştirilmektedir. Bu çerçevede, bu çalışmanın amacı yeşil sipariş belirleme problemi için MACBETH (Measuring Attractiveness by a Categorical Based Evaluation Technique) ve bulanık çok amaçlı doğrusal programlama modelini içeren bütünleşik bir yaklaşım önermektir. Önerilen yöntem iki aşamadan oluşmaktadır. İlk aşamada, amaç fonksiyonlarının ve kısıtların ağırlık değerleri bir çok kriterli karar verme yöntemi olan MACBETH yoluyla belirlenmiştir. Takip eden aşamada, MACBETH yönteminin bulguları çok amaçlı doğrusal programlama modeline dâhil edilmiştir. Önerilen matematiksel model, amaç fonksiyonu ve kısıtlarda belirsizlik içerdiği için Zimmermann yaklaşımı kullanılarak bulanıklaştırılmıştır. Modelin son hali LINDO programı kullanılarak çözdürülmüş ve tedarikçilerden verilmesi gereken sipariş miktarları saptanmıştır. Anahtar kelimeler: MACBETH, bulanık çok amaçlı doğrusal programlama, sipariş belirleme problemi.
47
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
An Integrated Approach based on MACBETH and Fuzzy Multiobjective Linear Programming for Green Order Allocation Problem Ahmet Alp ŞENOCAK1,*, Hacer GÜNER GÖREN1 1
Pamukkale University, Department of Industrial Engineering, Denizli, Turkey *Responsible author e-mail:
[email protected]
Abstract Supplier selection and order allocation, which is considered as the initial step of composing supply chain network design, is the process in which companies interact, evaluate and place order from suppliers. When considered that costs of raw material and constituent elements can reach 70% of the product costs, purchasing departments are one of the most important departments that have an impact on the profitability of the companies. Lately, in consequence of the demolition of natural resources, new arrangements introduced by governments and increasing pressure from customers’ demand, firms have started to place more emphasis on environmental issues. As the term “green” has coming into prominence, companies has started to revise their processes according to environmental criteria. These arrangements are held in all stages of supply chain such as green purchasing, green manufacturing, green distribution and green reverse logistics. Within this scope, this paper aims to present an integrated approach using Measuring Attractiveness by a Categorical Based Evaluation Technique (MACBETH) and fuzzy multi-objective linear programming model for green order allocation problem. The proposed approach consists of two stages. In the first stage, the weights of the objective functions and constraints are determined via MACBETH multi criteria decision-making method. In the following stage, the findings of MACBETH are integrated into multi-objective linear programming model. The proposed mathematical model is fuzzified by Zimmermann approach that includes vagueness in objectives and constraints. The complete mathematical model is solved by using LINDO software and the quantities of products provided by the suppliers are determined. Key words: MACBETH, fuzzy multi-objective linear programming, order allocation problem.
48
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Neme Duyarlı Güneş Destekli Otomatik Sulama Sistemi Ahmet ÇAĞLAR1,*, Harun ÖZÇELİKEL1, Elçin BAŞELÇİN1, Erdoğan ÖZEN1 Akdeniz Üniversitesi, Antalya, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
Özet Günümüzde enerjiye duyulan ihtiyaç teknolojik gelişmeler ve artan nüfusa bağlı olarak hızla artmaktadır. Artan ihtiyacı karşılamak ve yaşam konforunu artırmak amacıyla farklı enerji kaynaklarına yönelim artmıştır. Bu artış fosil kaynakların ve nükleer enerjinin yoğun kullanılması sonucunu doğurmuştur. Fosil ve nükleer kaynaklar insan yaşamını ve çevreyi olumsuz yönde etkilemektedir. Bu yüzden hem çevreye minimum düzeyde etkisi olan hem de enerji ihtiyacını karşılayabilecek sistemlere yönelinmesi ve özellikle de güneş, rüzgâr ve jeotermal gibi yenilenebilir enerji kaynaklarından yararlanılması gerekmektedir. Güneş, enerji kaynakları bakımından en temiz kaynaklar arasında gösterilmektedir. Yaydığı ısı ve ışık canlı yaşamının temel kaynağıdır. Bu iki enerji türü sistemlerin de iki şekilde geliştirilmesine yol açmıştır. Güneş enerjisinden termal ve fotovoltaik olmak üzere iki şekilde, özellikle de elektrik enerjisi üretiminde yoğun olarak yararlanılmaktadır. Güneş panellerinin bu avantajı önemli miktarda enerji tüketen tarımsal sulama sistemlerinde de kullanılabilir. Bu çalışmada Arduino kart ve nem sensör sayesinde toprağın anlık nem değerini ölçerek, gücünü güneş enerjisinden alan otomatik sulama sistemi kurulmuştur. Nem değeri belirlenen seviyenin altına indiği zaman Arduino devresi ile birlikte çalışan dalgıç pompa yardımıyla sulama sistemi devreye girecektir. Toprak istenen nem miktarına ulaştığında sistem otomatik olarak durdurulmaktadır. Çalışmanın amacı, herhangi bir ek enerji kaynağı kullanılmadan tüm enerjisini fotovoltaik güneş panelinden alan ve hiçbir manuel kullanım ve kontrol gerektirmeyen tam otomatik akıllı bir sulama sistemi geliştirmektir. Ayrıca damla sulama yönteminin tercih edilmesiyle sistem hem su tasarrufu sağlanmıştır hem de bitki yetiştirme verimliliği artırılmıştır. Anahtar kelimeler: Arduino, fotovoltaik, güneş enerjisi, tarımsal sulama, yenilenebilir enerji.
49
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Moisture-Sensitive Solar Assisted Automatic Irrigation System Ahmet ÇAĞLAR1,*, Harun ÖZÇELİKEL1, Elçin BAŞELÇİN 1, Erdoğan ÖZEN1 1
Akdeniz University, Antalya, Turkey *Responsible author e-mail:
[email protected]
Abstract Nowadays, energy consumption and demand have been increasing rapidly due to technological developments and increasing population. Different energy sources have been trended in order to meet energy demand and increase life comfort. This increase has caused excessive using of fossil fuel resources and nuclear energy. Fossil and nuclear sources influence human life and environment negatively. Therefore, trend in systems having both ability of meeting energy demand and minimal environmental impact is required. In this regard, renewable energy sources such as especially solar, wind and geothermal energy should be utilized. The sun is regarded as the cleanest source among all energy sources. Light and heat of the sun are the basic source of life. These two types of energy have led to the development of energy systems in two ways. It is benefited from solar energy in two ways, as photovoltaic and thermal, especially in the power generation. This advantage of solar panels can also be used in agricultural irrigation systems consuming significant amounts of energy. In this study, automatic irrigation system which takes its power from solar panel is installed by using Arduino board and moisture sensor. When moisture value of soil falls below the specified level, irrigation system will be operated with the help of submersible pump which works together with Arduino circuit. As soil reaches the specified moisture value, the system stops automatically. The purpose of this study is to develop a full automatic smart irrigation system which both takes its whole power from a photovoltaic solar panel without using an additional energy source and is free of manual use and control. Furthermore, the usage of drip irrigation method provides both water saving and plantation fertilization. Key words: Arduino, photovoltaic, solar power, agricultural irrigation, renewable energy.
50
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Hidrolik Kol Tasarımı ve İmalatı Ahmet ÇAĞLAR1,*, Ahmet AYDIN1, Erdoğan ÖZEN1 Akdeniz Üniversitesi, Antalya, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
Özet Bu çalışmada, günümüzde endüstride birçok alanda kullanılan robot kolların çalışma prensibine benzer şekilde çalışan kompakt bir hidrolik kol tasarlanmış ve imalatı yapılmıştır. Endüstride kullanılan robot kollar genellikle elektronik esaslı ve bilgisayar kontrollü üretilirken bu çalışmada akışkan enerjisinin kullanıldığı hidrolik esaslı manuel kontrollü bir robot kol üretilmiştir. Bu çalışmada, daha önce yapılmış benzer diğer hidrolik kollardan farklı olarak, kaldırılacak parçayı tutan kıskaca elektromıknatıs takılmıştır ve böylece ferromanyetik malzemelerin kavranması ve taşınması işi bu elektromıknatıs sayesinde kolaylaştırılmıştır. Ayrıca geniş hareket kabiliyeti sayesinde kolun 0,5 m2 'lik bir bölge hakimiyeti vardır ve kolun uzun olması sayesinde 0,5 m yükseklikteki cisimlerin taşınması ve hareketi sağlanabilmektedir. Çalışmada yapı hem mukavim ve rijit olması hem de olabildiğince hafif olması amacıyla mukavvadan oluşturulmuştur. Tüm gövde parçaları çift kat mukavvadır. Eksenel hareket için hidrolik piston olarak çeşitli büyüklükteki enjektörler, gövdenin ekseni etrafında saat yönü veya tersi yönde dönüş hareketi içinse ayrı plakalara tespit edilmiş enjektörler kullanılmıştır. Hidrolik sistemin kontrolü tıpta ağız içi ve boğaz muayenesinde kullanılan ve dondurma çubuğuna benzeyen tahta dil basacaklarından yapılan manivela kolları ile sağlanmaktadır. Sistemin tek elektronik aksamı elektromıknatıstır. Manyetik geçirgenlikleri yüksek olan ferromanyetik malzemelerin kavrama ve taşınmasında, kıskaçtaki kavrama gücünü arttırmak için bir güç kaynağı yardımıyla üzerinden akım geçen elektromıknatıs devreye girmekte, parça hedef noktaya taşındıktan sonra açma kapama butonu sayesinde akım kesilerek malzeme kontrollü bir şekilde bırakılmaktadır. Anahtar kelimeler: Robot kol, hidrolik sistem, enjektör, elektromıknatıs, ferromanyetik malzeme.
51
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Hydraulic Arm Design and Manufacturing Ahmet ÇAĞLAR1,*, Ahmet AYDIN1, Erdoğan ÖZEN1 1 Akdeniz University, Antalya, Turkey *Responsible author e-mail:
[email protected]
Abstract In this study, a compact hydraulic arm which has a similar working principle of robotic arms today used in many areas in industry has been designed and manufactured. Whereas robotic arms used in industry have been manufactured by generally electronic-based and computer-controlled, hydraulic-based and manual-controlled robotic arm which uses fluid energy has been manufactured in this study. In the present work, differently from other similar studies that were made previously, electromagnet has been assembled on the clamp which holds the part to be lifted. Thus, the job of gripping and transporting of ferromagnetic materials is facilitated by means of this electromagnet. Furthermore, thanks to its wide mobility, the system has 0,5 m2 of space domination, and thanks to its long arm, transporting and movement of objects at 5 m elevation can be provided. In the study, the construction has been consisted of cardboards for the purpose of both resistant and rigid, and as light as possible. All parts of the body are made of double layered cardboard. As a hydraulic piston for the axial movement, injectors of various sizes have been used. For rotation movement in clockwise or counterclockwise direction around the body’s axis, the injectors which were assembled on separated plates have been used. The control of hydraulic system is provided by lever arms made by wooden tongue depressors which resembles ice cream bar and is used for the intraoral and throat treatments in medicine. The only electronic part of the system is electromagnet. In gripping and transporting of ferromagnetic materials which have high magnetic permeability, in order to increase the gripping force of the clamp, the electromagnet being passed electric current through it is activated by means of a power supply. After the part is transported to the target, it is left in a controlled manner by being cut off the current by means of on-off button. Key words: Robotic arm, hydraulic system, injector, electromagnet, ferromagnetic material.
52
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Güneş-Rüzgar Hibrit Güç Sisteminin Antalya Hava Koşullarında Uygulanması: Bir Durum Çalışması Ahmet ÇAĞLAR1,*, Erdoğan ÖZEN1 Akdeniz Üniversitesi, Antalya, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
Özet Bu çalışmada bir kampusun gerekli elektrik ihtiyacının karşılanması için güneş-rüzgâr hibrit bir güç sistemi kullanılması durumunda gerekli sistemin tasarım, boyutlandırma, projelendirme ve işletilmesi süreçleri detaylı olarak incelenmiştir. Hibrit güç sisteminin kurulmasının planlandığı kampus Akdeniz Üniversitesi Merkez Kampusudur. Bölgeye ait güneş ve rüzgâr enerjisi potansiyelleri istatistiki verilerle değerlendirilmiş ve kampusa ait elektrik ihtiyacını karşılayacak sistemin büyüklüğü bu veriler ışığında tespit edilmiştir. Güneş ve rüzgâr enerji sistemleri için kurulu güç tespiti yapıldıktan sonra incelenen aylık dönemler için iki sistemin kapasite kullanım oranları belirlenmiştir. Anahtar kelimeler: Güneş, rüzgâr, hibrit sistem, elektrik üretimi, uygulama.
53
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Application of Solar-Wind Hybrid Power System in Antalya Weather Conditions: A Case Study Ahmet ÇAĞLAR1,*, Erdoğan ÖZEN1 1 Akdeniz University, Antalya, Turkey *Responsible author e-mail:
[email protected]
Abstract In this study, the processes of design, sizing, project and operation of necessary system are investigated in detail in case of using a solar-wind hybrid power system in order to meet necessary energy demand of a campus. Target campus where hybrid power system to be installed is Central Campus of Akdeniz University. Regional solar and wind energy potentials have been evaluated with statistical data and the size of the system meeting the energy demand of the campus is determined in the light of these data. After determining the installed capacities for solar and wind power systems, capacity utilization rates of two systems have been determined for monthly periods of interest. Key words: Solar, wind, hybrid system, power generation, application.
54
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Antalya Bölgesi İçin Rüzgar Karakteristiğinin Weibull Dağılımı Kullanılarak İncelenmesi Ahmet ÇAĞLAR1,*, Erdoğan ÖZEN1 Akdeniz Üniversitesi, Antalya, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
Özet Belirli bir bölgenin rüzgar enerjisi potansiyelini belirlemede en yaygın kullanılan istatistiksel yöntem Weibull dağılım fonksiyonudur. İki parametreli Weibull olasılık yoğunluk fonksiyonu ile ortalama rüzgar hızı, rüzgar gücü yoğunluğu ve dolayısı ile rüzgar enerjisi tahmini yapılabilmektedir. Bu çalışmada, Antalya ili için rüzgar hızı ve rüzgar gücünün aylara göre değişimi ve rüzgar karakteristiği moment yöntemi kullanılarak Antalya Bölge Meteoroloji İstasyonu'ndan alınan veriler yardımıyla belirlenmiştir. Böylece Antalya Bölgesinin rüzgar enerji potansiyeli tahmin edilerek olası bir rüzgar enerjisi santrali kurulumunun uygun olup olmayacağı )kareleri toplamının kökü (RMSE) hata analizleri yapılmıştır. Anahtar kelimeler: Rüzgar hızı, rüzgar gücü, Weibull dağılımı, moment yöntemi, Antalya bölgesi.
55
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Investigation of Wind Characteristics for Antalya Region Using Weibull Distribution Ahmet ÇAĞLAR1,*, Erdoğan ÖZEN1 1 Akdeniz University, Antalya, Turkey *Responsible author e-mail:
[email protected]
Abstract The most widely used statistical method that is used to determine the wind energy potential for a specific region is Weibull probability function. Using two-parameter Weibull power density function, average wind speed, average wind power and hence average wind energy can be forecasted. In this study, the monthly changes in the wind speed and power, and so wind characteristics for Antalya are determined using Moment Method with the help of the data taken from Antalya Meteorological Station. In this way, predicting the wind energy potential of Antalya region, it is discussed weither the possible installation of a wind power plant is feasible or not in this area. The results obtained are evaluated by using error analyses that are Coefficient of Determination (R2) and Root Mean Squares Error (RMSE). Key words: Wind speed, wind power, Weibull distribution, moment method, Antalya region.
56
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Fusarium Solgunluğu: Türkiye'deki Palmiyelerde Yeni Bir Hastalık Ahmet ÇAT1, Mürsel ÇATAL1,* Akdeniz Üniversitesi Ziraat Fakültesi Bitki Koruma Bölümü, Antalya, Türkiye *Sorumlu yazar e-posta:
[email protected]
1
Özet Palmiye, tropik ve subtropik bölgelerde yetiştirilen bir bitkidir. Ülkemizde daha çok peyzaj amaçlı kullanılmasına rağmen özellikle Afrika ülkeleri başta olmak üzere dünyada meyvesi ve yağ elde etmek için ticari amaçla yetiştirilen değerli ağaç türlerinden biridir. Dünyada palmiye yetiştirilen alanlarda görülen fusarium solgunluğu palmiyelerin en önemli hastalığıdır. Hastalığa sebep olan başlıca iki fusarium ırkı bulunmaktadır. Bu ırklardan Fusarium oxysporum f.sp. canariensis sadece kanarya palmiyelerinde etkili iken, Fusarium oxysporum f.sp. palmarum ise hassas olan diğer tüm palmiye çeşitlerinde etkilidir. Bu çalışma ülkemizde son yıllarda yurtdışından getirilen palmiye ağaçlarında meydana gelen kuruma, solgunluk ve bitkinin birkaç yıl içerisinde ölmesi ile sonuçlanan hastalıkların etmenlerinin belirlenmesi amacıyla yürütülmüştür. Bu amaçla palmiye bitkilerinin kök ve gövdelerinden örnek alınmış ve bu örnekler üzerindeki hastalık belirtileri ve hastalık etmeninin oluşturduğu muhtemel fungus yapıları doğrudan incelenmiştir. Hastalıklı bitki parçaları üzerinde hastalık etmeninin misel, konidi ve konidiofor yapıları mikroskop altında incelenmiştir. Ayrıca hastalık etmenini kültüre almak için enfekteli kök kısımları ilk olarak %10'luk kloraks ve ardından %96' lık etil alkol ile yüzey sterilizasyonuna tabii tutulduktan sonra içinde antibiotik (ampicilin) ilave edilmiş PDA besi ortamına ekilmiş ve 24oC'de 4 gün inkübasyona bırakılmıştır. İnkübasyonun ardından ortamda gelişen fungal yapılar kameralı mikroskop altında fotoğrafı çekilmiştir. Mikroskop da görülen misel, konidi ve konidiofor yapılarının Fusarium spp.'ye ait olduğu belirlenmiştir. Yapılan mikroskobik ve makroskobik analiz sonucunda palmiyelerde görülen kuruma, solgunluk ve bitkilerin ölmesi ile sonuçlanan hastalık belirtilerinin sebebinin Fusarium spp. olduğu tespit edilmiştir. Yapılan literatür araştırmasına göre, Ülkemizde palmiye bitkilerinde fusarium solgunluğu hastalığı ilk kez belirlenmiştir. Anahtar kelimeler: Palmiye, fusarium, solgunluk, Türkiye.
57
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Fusarium Wilt: A New Disease on Palms in Turkey Ahmet CAT1, Mürsel CATAL1,* 1
Department of Plant Protection, Faculty of Agriculture, Akdeniz University, Antalya, Turkey *Responsible author e-mail:
[email protected]
Abstract Palm is grown throughout tropics and subtropics. Although it is mostly grown for landscaping in Turkey, it is actually valuable tree species to obtain fruit and oil in many parts of the world especially in African countries. Fusarium wilt is the most important disease of the palm tree worldwide and the two main races of Fusarium cause the disease on the palm. While Fusarium oxysporum f.sp. canariensis is effective on only Canarian palm trees, Fusarium oxysporum f.sp. palmarum is effective on other sensitive palm trees in the world. This study was conducted to determine the pathogen causing drying, wilting and deaths on the palms imported from abroad to Turkey in recent years. Possible infected lesions caused by the pathogen were directly observed and then mycelium, conidia and conidiophores belongs to the pathogen were visualized under the microscope. Additionally, infected root parts of the tree were placed on Petri dishes containing potato dextrose agar (PDA) medium after surface sterilization with 10 % chlorax followed by 96 % ethyl alcohol and incubated for 4 days at 24oC. Developing fungal forms were visualized under microscope. As a result of the microscopic and macroscopic analyses, the pathogen causing some symptoms such as drying, wilting and deaths on the palms were determined as Fusarium spp. To our knowledge, the disease fusarium wilt caused by Fusarium spp. was firstly observed on palm tree in Turkey. Key words: Palm, fusarium, wilt, Turkey.
58
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Türkiye' de Protea (Protea cynaroides L.) Bitkisinde Yeni Bir Hastalık Ahmet ÇAT1, Mürsel ÇATAL1,* Akdeniz Üniversitesi Ziraat Fakültesi Bitki Koruma Bölümü, Antalya, Türkiye *Sorumlu yazar e-posta:
[email protected]
1
Özet Protea, başlıca kesme çiçek olarak yetiştirilen, ev bahçelerinde ve peyzaj amaçlı olarak kullanılan dünya genelinde yaygın değerli bir süs bitkisidir. Ülkemizde de yetiştiriciliği yapılan bu bitkide son yıllarda kuruma ve solgunluk belirtileri görülmüştür. Bu belirtilere sebep olan hastalığını tanımlamak amacıyla ilk olarak hastalıklı protea bitkilerinin, kök boğazı ve gövde kısımlarının görsel olarak incelenmiş ve bu kısımlarda çok sayıda mikroskleroti ve kabuk dokusunun alt kısmında siyahlaşma tespit edilmiştir. Bu hastalıklı kısımlardan parça alınarak PDA ortamına ekilmiş ve 24oC'de 3-4 gün inkübasyona bırakılmıştır. İnkübasyonun ardından fungus PDA ortamında ilk olarak beyaz daha sonra siyaha dönüşen renkli kültür kolonisi oluşmuştur. Fungusun kültürde spor oluşturmadığı sadece misel formda geliştiği belirlenmiştir. Yapılan mikroskobik ve morfolojik analiz sonucunda hastalık etmeninin Macrophomina phaseolina olduğu tespit edilmiştir. Aynı bitkilerin gövde kısmı ortadan kesildiğinde ise iletim demetlerinde pembemsi bir renk oluşumu tespit edilmiştir. Bu kısımlardan örnek alınarak yapılan mikroskop incelemeleri sonucunda, iletim demeti solgunluğu etmeni Fusarium spp. olarak tespit edilmiştir. Bu türün enfekteli protea dokularında bol miktarda makrokonidi ve mikrokonidi oluşturduğu kültürde ise sadece mikrokonidi oluşturduğu belirlenmiştir. M. phaseolina ise genelde safrofitik bir fungus olup mısır, soya fasulyesi başta olmak üzere genelde otsu bitkilerde hastalık yapmakta, odunsu bitkilerde çok nadiren yoğun stress ve sıcak hava koşulları altında zarar yapabilmektedir. Bu fungusun protea bitkisinde zarar yaptığına dair herhangi bir kayıt bulunmamaktadır. Diğer tespit edilen hastalık etmeni Fusarium spp. ise patojenik bir fungus olup otsu ve odunsu birçok bitkide yıkıcı hastalığa sebep olmaktadır. Bu sebeple protea bitkisinde görülen kuruma ve solgunluğun, iletim demeti solgunluğu hastalığına yol açan Fusarium spp.’den kaynaklandığı ve bu hastalıktan dolayı stres altına giren bitkileri M. phaseolina fungusunun enfekte ettiği saptanmıştır. Yapılan literatür taramasına göre, Macrophomina phaseolina ve Fusarium spp. fungal hastalık etmenleri ülkemizde protea bitkisinde ilk kez tespit edilmiştir. Anahtar kelimeler: Protea, Macrophomina phaseolina, Fusarium, solgunluk, kuruma.
59
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
A New Disease on Protea (Protea cynaroides L.) in Turkey Ahmet CAT1, Mürsel CATAL1,* 1
Department of Plant Protection, Faculty of Agriculture, Akdeniz University, Antalya, Turkey *Responsible author e-mail:
[email protected]
Abstract Protea is a valuable ornamental plant mainly grown as cut flower and used for home gardens and landscaping throughout the world. The symptoms of drying and wilting has been recently observed on protea plants in Turkey. In order to identify the disease, crown rot and stem parts of the infected protea plants were firstly observed phenotypically and then many microsclerotia and nigrescence under the bark texture were found. Infected tissues were planted on potato dextrose agar (PDA) medium and incubated for 3-4 days at 24oC. After the incubation, the fungus firstly colonized as white and then this form turned into black on PDA. Additionally, the fungus developed only in mycelium form on the medium without sporulation. The pathogen was determined as Macrophomina phaseolina based on morphologic and microscopic analyses. On the other hand, the stems of sampled plants were cut transversely and a pinky color was observed in vascular system. As a result of analysis under the microscope, Fusarium spp. was identified as the pathogen of vascular wilt. It is also observed that this Fusarium species produced abundantly macroconidia and microconidia on the infected tissues and only microconidia on PDA. In conclusion, the saprofitic fungus, M. phaseolina infects generally to herbaceous plants such as maize and soybean, but it can rarely cause damage under abiotic stress conditions on woody plants. However, there is no record about this pathogen in protea plant. Unlike this, Fusarium spp. is a pathogenic fungus and causes devastating disease on many herbaceous and woody plants. From this point of view, it is considered that vascular wilt disease resulting drying and wilting on protea plants was caused by Fusarium spp. and then the plants were infected by M. phaseolina under stress conditions caused by vascular wilt. To our knowledge, fungal pathogens, Macrophomina phaseolina ve Fusarium spp. were firstly observed on protea plant in Turkey. Key words: Protea, Macrophomina phaseolina, Fusarium, wilting, drying.
60
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sustainable Process for the Recovery of Cr(VI) from Waste Water Ahmet KAYA 1, Canan ONAC1,* 1
Pamukkale University, Denizli, Turkey *Responsible author e-mail:
[email protected]
Abstract New generations of carbon nano materials are the most important ingredients that affect the membrane performance in the production of nano-reinforced membranes. The membrane was modified with GO which improves the mechanical properties and permeability of the PIMs. Important outcomes of this work are high permeability, seamless porous structure, high selectivity and development of PIM by minimized nano-reinforced against pollution in addition of the unique physical properties of GO. The membrane performance and structure of GO/PIM optimized separately. The transport of Cr(VI) was achieved 99.044% under optimized conditions from the waste water to the acceptor phase through PIM by adding GO which incremented the features of membrane. The usage of this system is very sustainable and commercial for industrial waste water applications due its high resistant. Key words: Waste water, polymer inclusion membrane, graphene oxide.
61
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Recycleable and Sustainable System for the Purification of Chromate Plating Water Ahmet KAYA 1, Canan ONAC1,* 1
Pamukkale University, Denizli, Turkey *Responsible author e-mail:
[email protected]
Abstract It was developed recycleable and sustainable system for the purification of chromate plating water by using polymer inclusion membrane (PIM) modified with graphene oxide (GO). Important outcomes of this work are green technology for the removal of Cr(VI) from chromate plating water, high permeability, seamless porous structure, high selectivity and development of PIM by minimized nano-reinforced against pollution in addition of the unique physical properties of GO. The membrane performance and structure of GO/PIM optimized separately. The removal of Cr(VI) was achieved from the chromate plating water as a results of transport experiments performed on different parameters by determining the optimum conditions. PIM/GO exhibits great stability and selectivity in the presence of other metals in chrome plating bath water for the recovery of chromium and the system can be applied on the real samples. Key words: Chromate plating water, polymer inclusion membrane, graphene oxide.
62
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Isparta İklim Şartlarında Net Sıfır Enerjili Bina İçin Bir Analiz Ahmet ÖZSOY1,*, Berna KISCAK2 SDÜ, Teknoloji Fakültesi, Enerji Sistemleri Mühendisliği Bölümü Isparta, Türkiye SDÜ, Teknoloji Fakültesi, Enerji Sistemleri Mühendisliği Bölümü Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected]
1 2
Özet Net sıfır enerjili binalar, ürettiği enerjinin tükettiği enerjiye eşit yada daha fazla olan bina olarak tanımlanır. Bu binalar, klasik binalara göre çok daha az enerji tüketen, iklim ve çevre koşullarından etkileşimi olabildiğince azaltılmış, ihtiyaç duyduğu enerjiyi yenilenebilir enerji kaynaklarından sağlayan, ulusal enerji dağıtım hatları ile alışveriş yapabilen, çevre dostu ve sürdürülebilirliği hedefleyen binalardır. Net sıfır enerjili bina tasarımında enerji talebini düşürmek için atılacak ilk adım, bina yönü ve cephesiyle ilgili yapılabilecek ideal düzenlemeleri yapmak, yalıtımın en iyileştirilmesi, enerji tüketiminin azaltılıp, ihtiyaç duyduğu enerjiyi yenilenebilir enerji kaynaklarından sağlayan tasarımları gerektirir. Bu çalışmada Isparta ilinde iklim şartlarında net sıfır enerjili bir bina tasarımı için olası çözümler incelenmiştir. TS 825 standardına göre, tek katlı müstakil bir konutun özgül ısı kaybı belirlenmiş, yıllık ısıtma ve soğutma enerjisi ihtiyacı derece gün yöntemiyle hesaplanmıştır. Yıllık toplam enerji tüketimini azaltmak için bina dış kabuğunun daha iyi yalıtılmasıyla oluşan enerji tüketimindeki değişim incelenmiştir. Enerji analizinde binanın ısıtma ve soğutma enerjisi ihtiyacının yanında, günlük kullanımdaki elektrik ihtiyacı da dikkate alınmıştır. Konutun ısıtılması ve soğutulması ısı pompası ile sağlanmıştır. Binada kullanılacak enerjinin güneş enerjisinden PV sistemlerle sağlanması öngörülmüştür. Enerji kullanımında ulusal elektrik şebekesi ile PV sistemin çift yönlü bağlantılı olması öngörülmüştür. İhtiyaçtan fazla üretilen elektrik enerjisinin şebekeye aktarıldığı, enerjinin yetersiz olduğu durumlarda da şebekeden desteklenmesi öngörülmüştür. Yapılan analizde ısıtma ve soğutma enerjisi tüketimi ile günlük elektrik enerjisi tüketiminin aylara göre değişimi incelenmiştir. Ayrıca aylık olarak PV sistemden üretilebilecek enerjinin aylara göre değişimi analiz edilmiştir. Sonuçta yıllık olarak toplam enerji tüketimi ve üretimi karşılaştırılarak net sıfır enerjili bir bina için gerekli yalıtım kalınlıkları ile PV alanı belirlenmiştir. Anahtar kelimeler: Net sıfır enerjili bina, Isı yalıtımı, Enerji tüketimi, Enerji analizi.
63
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
An Analysis for Net Zero Energy Building in Isparta Climatic Conditions Ahmet ÖZSOY1,*, Berna KISCAK2 SDÜ, Technology Faculty, Energy Systems Engineering, Isparta, Turkey. SDÜ, Technology Faculty, Energy Systems Engineering, Isparta, Turkey. *Responsible author e-mail:
[email protected]
1 2
Abstract Net zero-energy buildings are defined as buildings that consume more energy than the energy they produce. These buildings are buildings that are able to exchange energy with national energy distribution lines, which have less energy consumption than classical buildings, which are minimized from climate and environment interactions as much as possible, which provide needed energy from renewable sources, and are environmentally friendly and sustainable. The first step to reduce energy demand in a net zero-energy building design involves making the ideal arrangements that can be made about the building direction and ceiling, optimizing insulation, reducing energy consumption, and providing the energy needed from renewable sources. In this study, possible solutions for the design of a building with net zero energy in the climatic conditions of Isparta are examined. According to TS 825 standard, the specific heat loss of a single-storey detached house was determined and the annual heating and cooling energy requirement was calculated with degree-day method. In order to reduce the annual total energy consumption, the change in energy consumption has been examined by better isolation of the outer shell of the building. In addition to the building's heating and cooling energy needs, the energy requirement for daily use is also taken into consideration. The heating and cooling of the house is provided by heat pump. It is foreseen that the energy to be used in the building will be supplied by photovoltaic systems. For energy use it is foreseen that the PV system and the national electricity network are bidirectional. It is envisaged that the surplus of generated electricity will be transferred to the electric grid and that it will be supported from the electric grid when the energy is insufficient. In the analysis, the changes of consumption of heating and cooling energy and daily electricity energy were examined. On the other hand, the change in the amount of energy that can be generated from PV system have been analyzed monthly. As a result, by comparing the total energy consumption and production per year, the insulation thickness and the PV area are determined for a net zero-energy building. Key words: Net zero-energy buildings, Heat insulation, Energy consumption, Energy analysis.
64
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Organik Gübre Alırken Dikkat Edilmesi Gereken Bazı Özellikler Ahmet Şafak Maltaş1, İdil KAYA1, Mustafa KAPLAN1,* 1
Akdeniz Üniversitesi Ziraat Fakültesi Toprak Bilimi ve Bitki Besleme Bölümü, Antalya *Sorumlu yazar e-posta:
[email protected]
Özet Bitkisel üretimde organik gübrelemenin çok yönlü faydalarının olduğu bilinmektedir. Organik gübrelerden beklenen çok yönlü faydalar söz konusuysa da organik gübrelerin yeterince kaliteli olmamasından kaynaklanan sorunlarla karşılaşılabilmektedir. Bu sorunların önemli biri ise yabancı ot tohumu içerikleri olarak ifade edilmektedir. Ancak bu sorunun ülkemizdeki durumunu ortaya koyan yeterli veri bulunmamaktadır. Bu konuda çalışmaların yapılması gerektiğini ortaya koymak üzere gerçekleştirilen bir ön gözlem çalışmasının bazı sayısal ve görsel materyalleri üzerinden konunun tartışılması amaçlanmıştır. Bu amaçla, 12 farklı organik gübre 100 g perlit ile homojen bir şekilde karıştırılmış ve daha sonra her bir karışım 5 litrelik saksılara doldurulmuştur. Saksılardan elde edilen minimum ve maksimum değerler, toplam yabancı ot sayısında 0-85 adet/saksı, yabancı ot çeşidinde 1-8 adet/saksı, yabancı ot yaş ağırlığında 0.2-168.88 g/saksı, yabancı ot kuru ağırlığında 0.01-21.49 g/saksı olarak ölçülmüştür. Organik gübrelerin pH değerlerinin 7.25-8.23 ve EC değerlerinin 0.312.79 dS/m aralığında değiştiği ölçülmüştür. Organik gübrelerin kullanımını sınırlandıran özellikle yabancı ot içeriğine bağlı yetersiz kalite sorununun, bu survey çalışmayla tartışılması çok yönlü faydalar sağlayabilecektir. Genel sonuç olarak, organik gübrelerdeki farklılıklar dikkate alındığında yabancı otlardan ari ve kullanma amacına uygun kimyasal özellikler taşıyan organik gübrenin seçilmesi oldukça önemlidir. Anahtar kelimeler: Yabancı ot, organik gübre, EC, pH.
65
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Some Parameters to be Considered When Buying Organic Fertilizer Ahmet Şafak Maltaş1, İdil KAYA1, Mustafa KAPLAN1,* 1
Department of Soil Science and Plant Nutrition, Faculty of Agriculture, Akdeniz University, Antalya, Turkey *Responsible author e-mail:
[email protected]
Abstract It is known that organic fertilizers have versatile benefits in crop production. Although organic fertilizers provide versatile benefits, some problems can occur due to quality of them. One of the most important problems is weed contents of the fertilizers. However, there is no enough knowledge about this problem. This preliminary study aimed to discuss why this subject is required with numerical and visual data. To this end, 12 different organic fertilizers were mixed homogeneously with 100 g perlite and then each mix was filled to 5 liter pots. Each pot was irrigated equally once a week. After 2 months, some paramaters such as number of weeds per pot (0-85), number of weed species per pot (1-8), weed fresh weight per pot (0.20-168.88 g), weed dry weight per pot (0.01-2.49 g) were determined. In addition to this, pH and EC values of organic fertilizers were found as 7.25-8.23 and 0.31-2.79 dS/m, respectively. This study can be helpful to emphasize quality problems of the organic fertilizers due to weed content. In conclusion, considering the differences among organic fertilizers, it is very important to select organic fertilizers which have suitable chemical properties and free of weeds. Key words: Weed, organic fertilizer, EC, pH.
66
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Fide Kalitesi Üzerine Firma ve Çeşit Etkisi Ahmet Şafak Maltaş1, Ayfer Hız 1, Mustafa Kaplan 1,* 1
Akdeniz Üniversitesi Ziraat Fakültesi Toprak Bilimi ve Bitki Besleme Bölümü, Antalya *Sorumlu yazar e-posta:
[email protected]
Özet Bu çalışma hazır fide yetiştiriciliği yapan ticari firmaların fide kalitesi üzerine olan etkilerini araştırmak amacıyla yapılmıştır. Fide üretimi yapan 5 farklı firmada, her çeşitten 200 adet olacak şekilde 3 farklı domates çeşidinin tohumları aynı gün ekilmiştir. Fide firmaları 42 gün boyunca kendi yetiştirme tekniklerini kullandıktan sonra fideler aynı gün teslim alınmıştır. Alınan fidelerin, boğum arası mesafe, gövde boyu, gövde kalınlığı, fide yaş ağırlığı, fide kuru ağırlığı, yetiştirme ortamı pH ve EC değerleri incelenmiştir. Araştırma sonuçlarına göre, çeşitler arasındaki değişim aralıkları boğum arası mesafede 2.08-3.06, gövde boyunda 8.90-10.28, gövde kalınlığında 2.83-3.01, bitki yaş ağırlığında 2.40-2.78, bitki kuru ağırlığında 0.21-0.22, yetiştirme ortamı pH'sında 6.23-6.31 ve yetiştirme ortamı EC değerlerinde 0.47-0.48 arasında ölçülmüştür. Firmalar arası değişim aralıkları ise, boğum arası mesafede 2,37-3.48, gövde boyunda 7.73-10.97, gövde kalınlığında 2.63-3.19, bitki yaş ağırlığında 2.03-3.30,bitki kuru ağırlığında 0.19-0.23, yetiştirme ortamı pH'ları 6.01-6.56 ve ortam EC değerlerinde 0.17-0.84 arasında belirlenmiştir. Genel olarak, fide kalitesini belirleyen kriterler üzerine çeşitlere oranla firmalar arası farkın daha fazla olduğu tespit edilmiştir. Bu durum, hazır fide olarak üretilen domates dışında ki diğer sebze fidelerinde de benzer önemli düzeyde farklılıkların olabileceğini düşündürmektedir. Sonuç olarak, fide kalitesi üzerine etkili olan en önemli faktörün "firma" etkisi olduğu görülmüştür. Sürdürülebilir ve standart fide kalitesi için fide firmalarına bağlı farkların küçültülmesi gerekmektedir. Ayrıca, firmalara bağlı kalite farklılıklarının, fidelerin üretim yapılacak ortamlara dikilmesinden sonra ki, bitki gelişimine olan etkilerini belirlemeye yönelik çalışmaların da yapılması gerektiğini ortaya koymaktadır. Anahtar kelimeler: Domates, fide kalitesi, standardizasyon.
67
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Company and Cultivar Effects on Seedling Quality Ahmet Şafak Maltaş1, Ayfer Hız 1, Mustafa Kaplan 1,* 1
Department of Soil Science and Plant Nutrition, Faculty of Agriculture, Akdeniz University, Antalya, Turkey *Responsible author e-mail:
[email protected]
Abstract This study was carried out to determine the effects of seedling companies on seedling quality. 200 seeds of 3 different tomato cultivars were sown in 5 different seedling companies. They had been cultivated for 42 days with cultivation practices of each company before the seedlings were received from the companies and then some parameters such as internode lenght, stem height, stem diameter, fresh weight, dry weight, pH and EC values of soil were determined. These paramaters ranged from 2.08-3.06 cm (internode lenght), 8.9010.28 cm (stem height), 2.83-3.01 cm (stem diameter), 2.40-2.78 g/plant (fresh weight), 0.210.22 g/plant (dry weight), 0.47-0.48 µS/cm (EC) and 6.23-6.31 (pH) among the cultivars. Unlike this, ranges for these parameters among the companies were found as 2.37-3.48 cm, 7.73-10.97 cm, 2.63-3.19 cm, 2.03-3.30 g/plant, 0.19-0.23 g/plant, 0.17-0.84 µS/cm and 6.016.56, respectively. Generally, it was found that differences among the companies were more than the cultivars on components of seedling quality. From this point of view, it is considered that important differences in vegetable seedlings except for tomato can be found similarly. In conclusion, the most important factor for seedling quality was “company” effect according to results. It is very important that the differences among the companies should be reduced for sustainable and standard seedling quality. Additionally, these results clearly point out that further studies will be conducted to determine effects of quality differences among companies on plant growth for next steps Key words: Tomato, seedling quality, standardization.
68
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Orman Genel Müdürlüğü Çalışanlarının Geoportal Bilgi Sistemi Üzerine Bakış Açıları Ahmet TOLUNAY1,* Emre ÜNAL2 1
Süleyman Demirel Üniversitesi Orman Fakültesi, Isparta, Türkiye 2 Orman İşletme Müdürlüğü, Dursunbey, Balıkesir, Türkiye *Sorumlu yazar e-posta:
[email protected]
Özet Teknolojik gelişmelerin getirdiği avantajlar, Coğrafi Bilgi Sisteminin (CBS) ormancılık çalışmalarındaki kullanımı günden güne daha fazla önem arz etmektedir. Orman Genel Müdürlüğünde çalışan 205 kişi üzerinde araştırmanın birincil verileri anket tekniğinden yararlanılarak elde edilmiştir. Anket sorularında 5’li likert ölçeği kullanılmıştır. Elde edilen verilerin değerlendirilmesi için SPSS 20 istatistik paket programından yararlanılmış ve istatistiksel analizlerde 0,05 anlamlılık düzeyi ölçüt alınmıştır. Anket tekniği ile elde edilen verilerin değerlendirilmesinde Parametrik testlerden Bağımsız örneklem t testi (Independent Samples Test) ile tek yönlü anova testi (one way anova) kullanılmıştır. Farklılıkların hangi gruptan kaynaklandığını bulmak için ise Duncan testi yapılmıştır. Bu testlerin yanında betimleyici bilgileri sunmak için frekans ve yüzde analizinden faydalanılmıştır. Anahtar kelimeler: İletişim, İletişim Teknolojileri, Geoportal, Coğrafi Bilgi Sitemi, Ormancılık, Orman Genel Müdürlüğü, Türkiye.
69
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Opinions of Employees at General Directorate of Forestry on Geoportal Information System Ahmet TOLUNAY1,* Emre ÜNAL2 Süleyman Demirel University, Faculty of Forestry, Isparta, Turkey 2 Forestry Enterprise Directorate, Dursunbey, Balıkesir, Türkiye *Responsible author e-mail:
[email protected]
1
Abstract In development with technological advance, using Geographic Information System (GIS) on forestry studies being more important day after day. Primary data of this study was obtained by questionnaire technique. This data were collected by 205 employees of General Directorate of Forestry. Quinary Likert scale is used in survey questions. The data obtained was analyzed using the SPSS 20 software and 0,05 significant level is used as a criteria in statistical analysis. Independent Samples Test and One Way Anova were used evaluating the data obtained by survey questions. Duncan test was used to determine which group shows difference. Besides, to offer descriptive knowledge’s, frequency and common-size percentage analysis were used. Key words: Communication, Communication Technologies, Geoportal, Geographic Information System, Forestry, General Directorate of Forestry, Turkey.
70
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Değer-İnanç-Norm Teorisinin Satın alma Sonrası Sorumlu Tüketim Davranışlarına Uygulanması: Geri Dönüşüm ve Yeniden Kullanım İnci DURSUN1,*, Ebru TÜMER KABADAYI 2, Ahmet Tuğrul TUĞER2 Yalova Üniversitesi, Yalova, Türkiye Gebze Teknik Üniversitesi, Kocaeli, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2
Özet Çevre sorunlarının oluşmasında insanların tüketim davranışlarının etkisinin büyük olduğu, davranış değişikliğiyle kötüye gidişin azaltılabileceği gerçeği genel kabul görmektedir. Dolayısıyla, tüketim alışkanlıklarını sorumlu bir şekilde gözden geçirmek hayati önem arz etmektedir. Geri dönüşüm, tüketicinin yalnızca bireysel değil toplumsal ve çevresel faydaları da sürekli göz önünde bulundurarak, kullanım sonrasında çöp ayrıştırması, yeni bir ürün satın almak yerine elindeki ürünleri koruması ya da paylaşmasını içeren satın alma sonrası sorumlu tüketimi temsil etmektedir (Vining&Ebreo, 1990; Hopper&Nielsen, 1991; Webb et al, 2008). Değerlerin, çevresel farkındalığın, ahlaki zorunluluğun geri dönüşüm üzerindeki etkisini ortaya çıkaran farklı çalışmalar bulunmasına rağmen, çevre dostu davranışları sağlama konusunda söz konusu faktörler arasındaki olası bir zincirleme etkinin varlığı hakkında bilgiler sınırlı kalmaktadır. Bu noktada çalışmamız, çevre dostu davranışlar kapsamında daha önce uygulanmış (ör. Steg vd., 2005; Jansson vd., 2011; Aguilar‐Luzón vd., 2012; van Riper vd.,2014) Değer-İnanç-Norm (DİN) modelini esas alarak, ahlaki ve bilişsel unsurların yeniden kullanım ve geri dönüşüm davranışları üzerindeki ardışık etkileriyle ilgili daha detaylı araştırma yapmayı amaçlamaktadır. Türkiye’de yaşayan 160 tüketiciye uygulanan ve DİN modelinin temel maddelerini (öz aşkınlık ve öz genişletim değerleri, çevresel farkındalık, sonuç etkinliği, bireysel ahlaki normlar ve tüketim sonrası sorumlu tüketimi) içeren anket, kolayda örnekleme yöntemiyle veriler elde edilmiştir. Hipotez testleri için yol analizi kullanılmıştır. Sonuçlar, model ve veriler arasında kabul edilebilir oranda uyumluluk göstermiş ve Aguilar-Luzon vd. (2012)’nin öne sürdüğü DİN’in geri dönüşüm davranışları kapsamında uygulanabileceği varsayımına kısmi destek sağlamıştır. Öz aşkınlık değeri olarak, evrenselcilik, çevresel farkındalık üzerinde en belirgin etkiye sahipken, diğer değerlerin beklenmedik bir şekilde hiçbir etkisi olmamıştır. Bu çalışmada, önceki DİN uygulamalarında karşılaşılmamış bir sonuç olarak, geri dönüşüm davranışı üzerinde yalnızca bireysel normların değil, yeniden kullanım davranışının da etkisinin olduğu ve sorumlu davranışlar arasında yayılma etkisine işaret ettiği ortaya çıkmıştır. Anahtar kelimeler: Değer-İnanç-Norm Modeli, Geri Dönüşüm, Yeniden kullanım, Çevreci tüketim.
71
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Application of Value-Belief-Norm Theory to Responsible Post Consumption Behaviors: Recycling and Reuse İnci DURSUN1,* Ebru TÜMER KABADAYI 2, Ahmet Tuğrul TUĞER2 1
Yalova University, Yalova, Turkey Gebze Technical University, Kocaeli, Turkey *Responsible author e-mail:
[email protected] 2
Abstract There is an agreement on the fact that environmental problems are consequences of human behavior and could be solved through behavioral changes. Accordingly, altering consumption habits in a responsible way is vital. Recycling is a post-purchase responsible consumption form including material separation after usage; donating, sharing or conserving objects for reuse instead of purchasing another one where the consumer habitually considers not only personal but environmental and social benefits (Vining&Ebreo, 1990; Hopper&Nielsen, 1991; Webb et al, 2008). There are different researches revealing the impact of values, environmental awareness, moral obligation on recycling but little is known about the possible chain effect of these factors on the way to ensure pro-environmental behaviors. This study aimed at providing further insight on the sequential effects of the moral and cognitive elements in reuse and recycling context, based on Value-Belief-Norm (VBN) Model, already applied in different pro-environmental behaviors (e.g. Steg et al, 2005; Jansson et al, 2011; Aguilar‐Luzón et al, 2012; van Riper et al, 2014). To this end, a convenience sample of 160 Turkish consumers was examined using questionnaires including VBN model’s main items (self-transcendent and self-enhancement values, environmental awareness, outcome efficacy, personal norms and responsible post consumption behavior). A path analysis was conducted to test the hypotheses. Results indicated a marginally acceptable fit between the model and data. These results provide a partial support to AguilarLuzon et al (2012)’s assumption that the VBN can be applied to recycling behaviors. As a self-transcendent value, universalism represented to be the most significant factor on environmental awareness while the other values, interestingly, didn’t have a significant impact. Concerning recycling behavior, there was an interesting result that hasn’t been previously seen in VBN applications, which suggests that not only personal norms had a positive impact on recycling behavior but also reuse behavior influenced it as well signaling a spillover effect between responsible behaviors. Key words: Value-Belief-Norm Model, Recycling, Reuse, Pro-environmental consumption.
72
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
RCCI Bir Motorda Enjeksiyon Zamanlamasına Bağlı Yanma ve Motor Performans Karakteristikleri Hamit SOLMAZ1,*, Ahmet UYUMAZ2 , Fahrettin BOZ2 H. Serdar YÜCESU1, , Emre YILMAZ1*, Bilal AYDOĞAN2 Gazi Üniversitesi, Teknoloji Fakültesi, Ankara, TÜRKİYE Mehmet Akif Ersoy Üniversitesi, Teknik Bilimler Meslek Yüksekokulu, Burdur, TÜRKİYE *Sorumlu yazar e-posta:
[email protected] 1
2
Özet Bu çalışmada dört silindirli, direkt enjeksiyonlu benzinli bir motorun RCCI motora dönüşümü gerçekleştirilmiştir. RCCI dönüşümü yapılan motorda enjeksiyon zamanlamasının yanma ve motor performans karakteristikleri üzerindeki etkileri deneysel olarak incelenmiştir. Bu amaçla deney motoru farklı enjeksiyon zamanlamalarında (40, 50,60 ve 80 °KA ÜÖN’dan önce), 1000 d/d’da, λ=2.2 değerinde ve tam yükte RCCI yanma modunda çalıştırılmıştır. Enjeksiyon zamanlaması avansa alındıkça maksimum silindir basıncı ve ısı dağılımı artmış, 80 °KA enjeksiyon zamanlamasında azalmıştır. Enjeksiyon zamanlaması avansa alındıkça indike termik verim ve yanma verimi artmış, özgül yakıt tüketimi azalmıştır. Maksimum indike termik verim ÜÖN’dan önce 80 °KA değerinde %42.47 olarak belirlenmiştir. Sonuçta RCCI yanmasının enjeksiyon zamanlamasından oldukça etkilendiği ve yanma fazının kontrol edilebileceği görülmüştür. Anahtar kelimeler: RCCI yanması, Enjeksiyon zamanlaması, Motor performansı.
73
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Combustion and Engine Performance Characteristics Depending on Injection Timing in a RCCI Engine Ahmet UYUMAZ2,*, Hamit SOLMAZ1, Fahrettin BOZ2 Emre YILMAZ1, Bilal AYDOĞAN2, H. Serdar YÜCESU1 1
2
Gazi University, Faculty of Technology, Ankara,TURKEY Mehmet Akif Ersoy University, High Vocational School of Technical Sciences, Burdur, TURKEY *Responsible author e-mail:
[email protected]
Abstract In this study, four cylinder, direct injection spark ignition engine was converted to RCCI engine. The effects of injection timing on combustion and engine performance characteristics were experimentally investigated in a RCCI engine. For this purpose, the test engine was operated at different injection timings including 40, 50,60 ve 80 °CA before top dead center (BTDC), 1000 rpm, λ=2.2 and full load on RCCI mode. Maximum in-cylinder pressure and heat release rate increased with the advance of injection timing except for 80 ° CA. Indicated thermal efficiency and combustion efficiency increased, specific fuel consumption decreased with the advance of injection timing. Maximum indicated thermal efficiency was determined as 42.47 % at 80 °CA injection timing. As a result, it was seen that RCCI was highly affected by injection timing and combustion phase can be controlled. Key words: RCCI combustion, Injection timing, Engine performance.
74
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
PRF60 ile Çalışan RCCI Bir Motorda Emme Havası Giriş Sıcaklığının Yanma ve Motor Performansı Üzerindeki Etkileri Ahmet UYUMAZ2,*,Hamit SOLMAZ1,Emre YILMAZ1, Bilal AYDOĞAN2, Fahrettin BOZ2,H. Serdar YÜCESU1 Gazi Üniversitesi, Teknoloji Fakültesi, Ankara, TÜRKİYE Mehmet Akif Ersoy Üniversitesi, Teknik Bilimler Meslek Yüksekokulu, Burdur, TÜRKİYE *Sorumlu yazar e-posta:
[email protected] 1
2
Özet RCCI motorlar yüksek termik verim ve düşük NOx-is emisyonları bakımından araştırmacıların ilgisini çekmektedir. Bu çalışmada, PRF60 yakıtı ile çalışan RCCI bir motorda emme havası giriş sıcaklığının yanma ve performans üzerindeki etkileri incelenmiştir. Dönüşümü yapılan RCCI motor 40°C, 60°C ve 80 °C emme havası giriş sıcaklıklarında, 1000 d/d’da, stokiyometrik karışım oranı ile tam yükte çalıştırılmıştır. Emme havası giriş sıcaklığı arttıkça maksimum silindir basıncı ve ısı dağılımı artmış, yanma avansa alınmıştır. Emme havası giriş sıcaklığının artışı yanma süresinin kısalmasına neden olmuştur. 40°C, 60°C ve 80 °C emme havası giriş sıcaklıklarında sırasıyla %30.46, %32.33 ve %27.94 indike termik verim elde edilmiştir. Minimum özgül yakıt tüketimi 60°C emme giriş sıcaklığında 332 g/kWh olarak belirlenmiştir. Aynı zamanda emme havası giriş sıcaklığı arttıkça yanma veriminin arttığı görülmüştür. Sonuçta emme havası giriş sıcaklığının RCCI yanması üzerinde kayda değer etkilerinin olduğu belirlenmiştir. Anahtar kelimeler: RCCI motor, Yanma, Emme havası giriş sıcaklığı, Motor performansı.
75
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Effects of Intake Air Temperature on Combustion and Engine Performance in a RCCI Engine Fueled With PRF60 Ahmet UYUMAZ2,*,Hamit SOLMAZ1,Emre YILMAZ1, Bilal AYDOĞAN2, Fahrettin BOZ2,H. Serdar YÜCESU1 1
2
Gazi University, Faculty of Technology, Ankara,TURKEY Mehmet Akif Ersoy University, High Vocational School of Technical Sciences, Burdur, TURKEY *Responsible author e-mail:
[email protected]
Abstract Researchers interested in RCCI engines due to higher thermal efficiency and lower NOx-soot emissions. In this study, the effects of intake air temperature on combustion and performance were investigated in a RCCI engine fueled with PRF60. RCCI engine was run at 40°C, 60°C and 80 °C intake air temperature, 1000 rpm, stoichiometric air-fuel ratio and full load. Maximum in-cylinder pressure and heat release rate increased and combustion was advanced with the increase of intake air temperature. combustion duration was shortened with higher intake air temperature. Indicated thermal efficiency was determined as 30.46%, 32.33% ve 27.94% with 40°C, 60°C and 80 °C intake air temperature respectively. Minimum specific fuel consumption was computed as 332 g/kWh at 60°C. It was also seen that combustion efficiency increased with the increase of intake air temperature. As a result, it was determined that intake air temperature has remarkable effects on RCCI engine. Key words: RCCI engine, Combustion, Intake air temperature, Engine Performance.
76
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Alaçatı’nın Kültürel Sürdürülebilirlik Bağlamında Sürdürülebilir Tasarım Rehberinin Oluşturulması Ali Berkay AVCI1,*, Ş. Gülin BEYHAN 2 1
Suleyman Demirel University, Isparta, Turkey Suleyman Demirel University, Isparta, Turkey *Sorumlu yazar e-posta:
[email protected] 2
Özet Alaçatı merkezinin sahip olduğu 19. yüzyıldan kalma geleneksel konut dokusu Alaçatı turizminin en önemli çekiciliğini oluşturmaktadır. Bu geleneksel dokuyu korumak amacıyla Alaçatı’nın merkezi İzmir Kültür ve Tabiat Varlıklarını Koruma Kurulu tarafından 1998 yılında “Kentsel Sit Alanı” olarak ilan edilmiştir. Alaçatı geleneksel mimari dokusunun devamlılığı adına yeni yapılacak binalar için 2007 yılında Alaçatı Koruma Amaçlı Uygulama İmar Planı oluşturulmuştur. Alaçatı Koruma Amaçlı Uygulama İmar Planı, Alaçatı Kentsel Sit Alanı ve yakın çevresinde tasarlanacak olan yapıların pencere, pencere kapakları, çatı, çatı saçakları, cumba, balkon ve Alaçatı taşı kullanımı gibi dekoratif özelliklerini belirlemektedir. Ancak Alaçatı geleneksel konutları, otantik bir turizm çekiciliği olmalarının yanı sıra, Alaçatı’nın kültürüne uyum sağlamış mimari özellikler de taşımaktadırlar. Dolayısıyla Alaçatı’da yeni yapılan butik oteller, bu geleneksel dokuya uyumlu olarak tasarlanmakta, ancak bu uyum sadece görsellikte kalmaktadır. Bu durum, gün geçtikçe artan konaklama gereksiniminden dolayı yeni yapılan tasarımlara yol gösterecek bir sürdürülebilir tasarım rehberi ihtiyacını doğurmaktadır. Mevcut çalışma Alaçatı geleneksel mimarisinin sahip olduğu kültürel sürdürülebilirlik özelliklerini ortaya koyarak Alaçatı için bir sürdürülebilir tasarım rehberi oluşturmayı amaçlamaktadır. Çalışmanın materyalini geleneksel konutların mimari çizimleri, fotoğrafları ve Alaçatı’nın sürdürülebilir özellikleri oluşturmaktadır. Bu materyal üzerinden hazırlanan grafiklerle sürdürülebilirlik stratejileri sokak ve konut ölçeği olmak üzere iki ana başlık altında sıralanmıştır. Çalışma sonucunda elde edilen bilgilerin Alaçatı’da tasarlanacak olan yeni konut ve otel yapılarına yol göstermesi beklenmektedir. Anahtar kelimeler: Kültürel Sürdürülebilirlik, Alaçatı, geleneksel mimari, tasarım rehberi, Kentsel Sit Alanı.
77
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Creating the Sustainable Design Guide of Alaçatı in Terms of Cultural Sustainability Ali Berkay AVCI1,*, Ş. Gülin BEYHAN 2 1
Suleyman Demirel University, Isparta, Turkey Suleyman Demirel University, Isparta, Turkey *Responsible author e-mail:
[email protected] 2
Abstract Traditional houses that date back to 19th century in the center of Alaçatı are the most important tourism pull factor of the town. In order to preserve the traditional characteristic, the center of Alaçatı was announced as urban conservation area by the İzmir Conservation Council of Cultural and Natural Properties in 1998. For the sake of the continuation of the traditional texture of Alaçatı, Alaçatı Conservation Plan has been founded in 2007 for the new building designs in Alaçatı. Alaçatı Conservation Plan defines the decorative properties of the buildings to be designed in the Alaçatı Urban Conservation Area, such as windows, windows covers, roof, roof eaves, bay windows, balconies and the use of Alaçatı stone in the façades. However, besides the houses’ authentic tourism appeality, there are architectural features that respond the climate of Alaçatı. Hence, recently constructed boutique hotels are designed in a harmony with the traditional pattern, yet this harmony remains only in visuality. This condition requires a sustainable design guide, which is to lead the new building designs in the area, as a result of increasing accommodation need. The present study aims to create a sustainable design guide for Alaçatı by using the cultural sustainability features that Alaçatı houses possess. The materials of the study are the architectural drawings of vernacular houses, photographs and sustainable architecture strategies for Alaçatı. The sustainability strategies are presented in two major titles, which are as street and building scale with the graphics that are prepared regarding to the materials. The constructed information in the study are expected to guide the new building designs in Alaçatı. Key words: Cuktural Sustainability, Alaçatı, vernacular architecture, design guide, urban conservation area.
78
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Alaçatı’da Geleneksel Konuttan Dönüştürülen Bir Otelin Bina Enerji Modellemesi ile Ekolojik Sürdürülebilirlik Açısından Değerlendirilmesi Ali Berkay AVCI1,*, Ş. Gülin BEYHAN 2 1
Suleyman Demirel University, Isparta, Turkey Suleyman Demirel University, Isparta, Turkey *Sorumlu yazar e-posta:
[email protected] 2
Özet Alaçatı, rüzgar sörfüne uyumlu olan denizi ve rüzgarı, geleneksel mimarisi ve kültürü sayesinde 1990’lar sonrasında Türkiye’nin en çok ziyaret edilen turizm merkezlerinden birisi olmuştur. Alaçatı geleneksel konutları ise Alaçatı turizminin en önemli cazibesini oluşturmaktadır. Artan turizm talebi ile birlikte ortaya çıkan konaklama ihtiyacı, Alaçatı’daki geleneksel konutların otellere dönüştürülmesi ve yeni otel yapılarının yapılmasına yol açmıştır. Mevcut çalışma ise Alaçatı’nın tarihi dokusu içerisinde Tokoğlu Mahallesi’nde yer alan 150 yıllık bir Rum evinden dönüştürülen 1005. Sokak 68 numaralı oteli konu almaktadır. Çalışmanın amacı geleneksel Alaçatı konutundan dönüştürülmüş olan bu otelin sahip olduğu ekolojik mimarlık özelliklerinin hem kavramsal hem de niceliksel olarak ortaya koyulmasıdır. Bu hususta otelin dijital ortamda üç boyutlu bina enerji modellemesi yapılmıştır. Model için gerekli olan mimari çizim, iklim, malzeme ve yapı kullanımı verileri, otelin restorasyon ve rölöve çalışmaları, Adnan Menderes Meteoroloji İstasyonu iklim verileri, yerinde tespit, gözlem ve fotoğraflama, ve otel ile ilgili daha önceden yapılan literatür çalışmalarından elde edilerek girilmiştir. Ekolojik sürdürülebilirlik özellikleri model üzerinden kış ve yaz durumu için ayrı olarak alınan ısıtma ve soğutma enerjisine yüzdelik etkisi olarak sunulmuştur. Çalışmanın sonucunda geleneksel Alaçatı konutlarının sahip olduğu mimari özelliklerin bazılarının ısınma ve soğutmaya pasif olarak katkı sağladığı, bazılarının etkisinin olmadığı ve bazılarının ise harcanan enerjiyi arttırarak sürdürülebilirlikten uzak olduğu görülmüştür. Elde edilen bu sonuçların Alaçatı’da geleneksel dokuya uyumlu olarak tasarlanan yeni oteller için ekolojik sürdürülebilirlik açısından yol gösterici olması beklenmektedir. Anahtar kelimeler: Ekolojik sürdürülebilirlik, Alaçatı, otel, bina enerji modellemesi, geleneksel mimari.
79
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Assessment of a Hotel Converted from a Traditional House in Alaçatı by Building Energy Modeling in terms of Ecological Sustainability Ali Berkay AVCI1,*, Ş. Gülin BEYHAN 2 1
Suleyman Demirel University, Isparta, Turkey Suleyman Demirel University, Isparta, Turkey *Responsible author e-mail:
[email protected] 2
Abstract Alaçatı has become one of the very popular tourism centers in Turkey after 1990, regarding to its sea and wind that are suitable for windsurfing, vernacular architecture and its culture. The major pull factor of the tourism of Alaçatı is to be the vernacular houses of the area. The need for accommodation that is resulted by the increasing tourism demand started the conversion of the vernacular houses into hotels and construction of the new accommodation buildings. The present study is focuses on the hotel building number 68 of 1005th street, which is converted from a 150 year old Greek house in Tokoğlu province of the historic center of Alaçatı. The purpose of the study is to reveal the ecological architecture properties that the hotel possesses by both conceptual and quantitative approach. Concerning to this purpose, the digital energy modeling of the building has been done. The necessary information for the energy model is elicited from the architectural drawings, climate, material, and building usage data, the restoration and survey works of the hotel, Adnan Menderes Weather Station weather data, on-site detection, observation, photography work and previous literature studies about the hotel. The ecological sustainability properties are presented on the model for the winter and summer condition respectively, as the percentage effect on the heating and cooling energy need for the hotel. In the result of the study, it is clarified that some of the passive architectural properties reduce to the heating and cooling energy, some of them doesn’t have any effect and some of them are observed to be far from being sustainable as they increase the energy need of the building. It is expected that the attained results from the study are expected to be a guide for new hotels to be designed in Alaçatı in terms of ecological sustainability. Key words: Ecological sustainability, Alaçatı, hotel, building energy modeling, vernacular architecture.
80
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Fotovoltaik Panellerde Yaşlanma ve Panel Verimi Üzerindeki Etkileri Ali ÇINGI1,* Kilis 7 Aralık ,Üniversitesi Elektrik-Elektronik Mühendisliği, Kilis, Türkiye *Sorumlu yazar e-posta:
[email protected]
1
Özet Enerji tüketiminin hızlı bir şekilde artması ve fosil yakıtların çevreye olan zararları da dikkate alındığında, yenilenebilir enerji kaynaklarına olan ilginin her geçen gün artması kaçınılmaz bir hal almaktadır. Yenilenebilir enerji kaynaklarının bu derece önemli olması bu kaynakları elektrik enerjisine dönüştüren sistemleri de önemli hale getirmektedir. Yapılan sistemlerin uzun ömürlü olması maliyetin hesaplanması açısından oldukça önemlidir. Bu çalışmada da yenilenebilir enerji kaynaklarından olan güneş enerjisi sistemlerinin temel bileşenini oluşturan fotovoltaik panellerin gün ışığına maruz kalmaları sonucu yaşlanmaları üzerine çalışma yapılmaktadır. Yıllar içerisinde fotovoltaik panellerde meydana gelen yıpranmalar ve verim kayıpları da bu çalışmada verilmektedir. Anahtar kelimeler: Güneş enerjisi, Fotovoltaik panel, Yaşlanma faktörü, Verimlilik.
81
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Effects On Aging and Panel Yield In Photovoltaic Panels Ali ÇINGI1,* Kilis 7 Aralık ,Üniversitesi Elektrik-Elektronik Mühendisliği, Kilis, Türkiye *Responsible author e-mail:
[email protected]
1
Abstract Given the rapid increase in energy consumption and the harmful effects of fossil fuels on the environment, the growing interest in renewable energy sources is inevitable. The fact that renewable energy sources are so important makes systems that convert these resources into electricity energy important. The long life of constructed systems is very important in terms of cost calculation. In this study, photovoltaic panels constituting the basic components of solar energy systems from renewable energy sources are exposed to daylight and their final aging is studied. The wastage and yield losses in the photovoltaic panels over the years are also given in this study. Key words: Solar energy, Photovoltaic panel, Aging factor, Productivity.
82
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Jeotermal Enerji Kullanımında Ülkemiz ve Diğer Ülkelerin Mevcut Durumlarının Analizi ve Değerlendirilmesi Ali ÇINGI1,* Kilis 7 Aralık ,Üniversitesi Elektrik-Elektronik Mühendisliği, Kilis, Türkiye *Sorumlu yazar e-posta:
[email protected]
1
Özet Bugün kullanmakta olduğumuz fosil kaynaklarının kaynağının sınırlı olması ve kendisini yenileme sürelerinin binlerce yıl alması, yenilenebilir enerji kaynaklarına olan ilginin artmasında etkili olmaktadır. Gelişmiş ve gelişmekte olan ülkeler yenilenebilir enerji kaynaklarına yönelik politikalar uygulayarak mevcut rezervlerinin potansiyellerini ortaya çıkarmaktadır. Yapılan bu çalışmada da yenilenebilir enerji kaynağı açısından zengin ülkeler arasında yer alan ülkemizin jeotermal enerji kaynağı potansiyeli verilmekte ve jeotermal enerji yönünden zengin ülkelerin mevcut durumları analiz edilmektedir. Ayrıca ülkemizin uyguladığı politikalar verilerek jeotermal enerjideki yıllara göre değişim oranları da verilmektedir. Anahtar kelimeler: Jeotermal Enerji, Yenilenebilir Enerji, Enerji Potansiyeli.
83
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Analysis and Evaluation of Our And Other Countries On Using Of Geothermal Energy Ali ÇINGI1,* Kilis 7 Aralık ,Üniversitesi Elektrik-Elektronik Mühendisliği, Kilis, Türkiye *Responsible author e-mail:
[email protected]
1
Abstract The fact that the sources of the fossil resources we use today are limited and the renewal periods take thousands of years, are influencing the interest in renewable energy sources. Developed and developing countries implement policies for renewable energy sources, revealing the potential of their current reserves. In this study, our country which is one of the countries rich in renewable energy resources is given the potential of geothermal energy source and the current situation of countries rich in geothermal energy is analyzed. In addition, given the policies applied by our country, rates of change according to years in geothermal energy are given. Key words: Geothermal Energy, Renewable Energy, Energy Potential.
84
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Bursa, Yalova ve Sakarya’da Odunsu Süs Bitkisi Üretimi ve Satışı Yapan Özel Fidanlıkların Değerlendirilmesi Mustafa YILMAZ1,*, Ali TAŞTAN2 Öğretim Üyesi, BTU Orman Fakültesi, Orman Mühendisliği Bölümü, Bursa Yüksek Lisans Öğrencisi, BTU Fen Bil. Enst., Orman Müh. Anabilim Dalı, Bursa 1
2
Özet Son dönemlerdeki hızlı kentleşme ile beraber, kentlerdeki bitkilendirme faaliyetleri ve buna bağlı olarak süs bitkisi üretimi ve satışı çok büyümüştür. Süs bitkisi sektöründeki hızlı ve kontrolsüz büyüme beraberinde yeni sorunların çıkmasına yol açmıştır. Bu araştırmada Bursa, Yalova ve Sakarya’da bulunan süs bitkisi sektöründe faaliyet gösteren firmalara ait genel bilgiler ve üretimi ve satışı yapılan türlerin özelliklerini kapsayan 2 farklı anket formu hazırlanmıştır. Belirli bir sınırlama yapılmadan küçük, orta ve büyük ölçekte her ilden 30 toplamda 90 firma sahibi ile yüz yüze görüşülerek anket formları doldurulmuştur. Çalışmada, fidanlıklar üretilen fidan türü, doğallık, ithalat-ihracat, üretim şekli, bakım ve kullanılan saksı harcı, fidan tipi, ilgili pazar ve iş tecrübesi olmak üzere sekiz farklı açıdan değerlendirilmiştir. Süs bitkisi üretiminde türler, ülkemizin doğal türleri ya da ülkemizde doğal yayılışı olmayan yabancı türler olarak iki kategoriye ayrılmıştır. Anket yapılan özel fidanlıklarda üretimi ve pazarlaması yapılan 75 süs bitkisi türünden % 42,7 doğal, % 57,3 ise yabancı türdür. Genel olarak üretilen ve satılan fidanların % 33,3’ü çıplak köklü, % 59,3’ü saksılı, % 7,3’ü rootball tipindedir. Sulama tekniği bakımından üreticilerin % 38,1’i damlama, % 40,6’sı yağmurlama, % 21,3’ü elle sulama yapmaktadır. Firmaların % 12,7’si organik gübre, % 87,3’ü kimyasal gübre kullanmaktadır. Yurtdışı bağlantılar bakımından araştırma konusu firmaların % 34,2’si ihracat ve % 65,8’i ise ithalat yapmaktadır. Ülkemizin fitocoğrafik konumu, iklimi, biyolojik çeşitliliği, pazara yakınlığı gibi birçok yönden üstün özellikleri vardır. Buna rağmen araştırma yapılan üç ilde kullanılan süs bitkilerinin % 57,3’ü yabancı türdür. Ayrıca doğal türler dahil satışı yapılan bitki türlerinin % 65,8’i ithal edilmektedir. Bu durum ilerleyen yıllarda birçok problemi de beraberinde getirecektir. Ülkemizdeki odunsu bitki tür çeşitliliğinin zenginliği de göz önünde bulundurularak doğal türler süs bitkisi olarak daha çok değerlendirilmelidir. En azından doğal türlerin yurtdışından ithalatına bir düzenleme getirilmelidir. Doğal türlerin kullanılması ekolojik uyum, etnobotanik ve kent kimliği bakımından da özellikle tercih edilmelidir. Anahtar kelimeler: Odunsu Süs Bitkisi, Doğal Türler, Fidanlık, Bitkilendirme.
85
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Evaluation of Private Nurseries Producing and Selling Woody Ornamental Plants in Bursa, Yalova, and Sakarya Mustafa YILMAZ1,*, Ali TAŞTAN2 1 2
Professor, BTU Faculty of Forestry, Department of Forest Engineering, Bursa MSc student, BTU Faculty of Forestry, Department of Forest Engineering, Bursa
Abstract With the recent rapid urbanization, the plantation activities in the cities and the production and sales of ornamental plants have grown accordingly. Rapid and uncontrolled growth in the ornamental plant sector has led to new problems. In this research, two different questionnaires were prepared covering the general information of the firms operating in the ornamental plant sector in Bursa, Yalova and Sakarya and the characteristics of the species produced and sold. The questionnaires were filled in face-to-face with 30 nursery owners from each province, 90 nursery owners totally, including small, medium and large size private nurseries without any specific restrictions. In the study, nurseries were evaluated from eight different perspectives including seedling type, naturalness, import-export, production type, maintenance and used pots, seedling type, related market and work experience. In the production of ornamental plants, the species are divided into two categories as natural species of our country and foreign species that do not have natural distribution in our country. Of the ornamental plants of which 75% are produced and marketed, 42.7% are natural and 57.3% are exotic species. Generally 33,3% of the seedlings produced and sold are bare rooted, 59,3% are potted, and 7,3% are rootball type. In terms of irrigation technique, 38.1% of producers are dripping, 40.6% are sprinkling and 21.3% are hand irrigation. The nursery firms use 12.7% organic fertilizer and 87.3% use chemical fertilizer. In terms of foreign connections, 34.2% of the surveyed nursery firms make exports and 65.8% of them make imports. Our country has superior features in many aspects such as its phytogeographical position, climate, biological diversity, proximity to markets. Despite this, 57.3% of the ornamental plants produced and sold in three provinces conducted are foreign species. In addition, 65.8% of the plant species sold, including natural species, are imported. This will bring many problems in the coming years. Considering the richness of the diversity of woody plant species in our country, natural species should be benefited more as ornamental plants. At least the importation of natural species from abroad should be regulated. The use of natural species should be particularly preferred in terms of ecological adaptation, ethnobotany, and the urban identity. Key words: Woody Ornamental Plant, Native Species, Nursery, Plantation.
86
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Optimization of Polymer İnclusion Membranes For Transportation of Quercetin Flavonol Alime YILMAZ1*, Necip ATAR1, Mehmet Lütfi YOLA2, Hamza Korkmaz ALPOĞUZ3, Ahmet KAYA3, Canan ONAÇ3 1*
Pamukkale University, Faculty of Engineering, Department of Chemical Engineering, Denizli, Turkey 2 Iskenderun Technical University, Department of Biomedical Engineering, Hatay, Turkey 3 Pamukkale University, Faculty of Science and Literature, Department of Chemistry, Denizli, Turkey *Responsible author e-mail:
[email protected]
Abstract Flavonoids occur naturally in fruits and vegetables. They are component of our diet. The most important biological effect of flavonoids is their ability to act as antioxidants. Membrane technology has greatly enhanced our capabilities to restructure production processes, protect the environment and public health, and provide new technologies for sustainable growth. In this study, transportation of synthetic quercetin flavonol- which is a flavonoid derivative- was carried out by using polymer inclusion membranes. In order to obtain efficient and effective transport process, optimum polymer inclusion membranes were synthesized by transportation of synthetic quercetin. In polymer inclusion membranes, transportation of synthetic quercetin was done with aliquat 336 transporter, from acidic donor phase to acceptor phase with a pH 5 buffer solution with % 62 yield. Cellulose tri acetate (CTA) were used as polymer support material while 2-NPOE was used as a plasticizer material as well. Synthesized membranes were characterized by Atomic Force Microscope (AFM) & Scanning Electron Microscobe (SEM). Key words: Polymer inclusion membrane, flavonoid, quercetin.
87
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Transportation of Quercetin Flavonol From Real Samples By Using Polymer Inclusion Membranes Alime YILMAZ1*, Necip ATAR1, Mehmet Lütfi YOLA2, Hamza Korkmaz ALPOĞUZ3, Ahmet KAYA3, Canan ONAÇ3 1*
Pamukkale University, Faculty of Engineering, Department of Chemical Engineering, Denizli, Turkey 2 Iskenderun Technical University, Department of Biomedical Engineering, Hatay, Turkey 3 Pamukkale University, Faculty of Science and Literature, Department of Chemistry, Denizli, Turkey *Responsible author e-mail:
[email protected]
Abstract Quercetin is found in various food products and plants, including fruits, seeds, vegetables, tea, turnip, grape molasses, bracken fern, and natural dyes. In vitro experiments show that quercetin may be effective in treatment of various types of cancer and it may be combined with other anticancer drugs to reduce their doses and subsequently their side effects. In this study, transportation of quercetin flavonol from real samples -turnip and grape molasses- was carried out by using polymer inclusion membranes. In order to obtain efficient and effective transport process, optimum polymer inclusion membranes were synthesized by transportation of synthetic quercetin. In transportation of synthetic quercetin experiments, plasticizer type and amount, aliquat 336 carrier amount, pH of acceptor phase, acid type of donor phase parameters were investigated. By using optimum polymer inclusion membranes and optimum transportation parameters; quercetin transportation experiments were carried out for turnip and grape molasses samples. 70,6 % and 68,75 % quercetin transportation yield was observed respectively. Key words: Polymer inclusion membrane, real samples, quercetin.
88
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Analitik Hiyerarşi Prosesi ile Rüzgar Türbini Seçimi Aliye Ayça SUPÇİLLER1,*, Akın YILDIZ1 Pamukkale Üniversitesi, Denizli, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
Özet Dünya nüfusundaki hızlı artış, sanayileşme, teknolojik araç ve gereçlerin insan yaşamında yoğun bir şekilde yer alması enerji tüketiminin çok hızlı artmasına sebep olmaktadır. Dünyada gelişen teknolojiyle fosil yakıt tüketimi cazibesini kaybetmekte ve yenilenebilir enerjiye olan talep gün geçtikçe artmaktadır. Rüzgar enerjisini kullanarak yapılan elektrik üretimi güvenli ve çevresel özellikleriyle en dost yenilenebilir enerji sistemleridir. Ülkemizde rüzgar enerjisi potansiyeli oldukça fazladır. Rüzgâr potansiyelleri ölçülerek keşfedildikçe rüzgar türbinlerinin kurulumu da hızla artmaktadır. Yeni rüzgar santrallerinin kurulması ciddi maliyetler getirdiği gibi karar verme süreci de oldukça zordur. Bu çalışmada Denizli’de faaliyet gösteren bir yatırım firması için istenilen şartlara en uygun rüzgar türbini seçimi problemi ele alınmıştır. Bu konudaki literatür taraması ve firmadaki deneyimli uzmanların görüşleri kullanılarak kriterler belirlenmiştir. Türbin özellikleri, ekonomik faktörler, çevresel özellikler ve tedarikçi performansı olarak dört ana kriter ve bunların altında toplam yedi alt-kriter bulunmaktadır. Yöntem olarak çok kriterli karar verme yöntemlerinden Analitik Hiyerarşi Prosesi uygulanmıştır. Her ana kriterin her alt kriteri ve alternatifleri için ağırlıkları bulunmuş ve uygun bir tedarikçi sıralaması elde edilmiştir. İlk aşamada belirlenen beş turbin tedarikçisini modeli değerlendirilmiş ve en uygun tribün seçilmiştir. T1 türbini en iyi alternatif olarak belirlenmiştir. Çalışma, karar vericiler için en uygun türbini seçmede iyi bir referans olmuştur. Gelecekte, farklı çok kriterli karar verme yöntemleri de sıralama aşamasında entegre edilerek karar yöntemi geliştirilecektir. Anahtar kelimeler: Analitik Hiyerarşi Prosesi, Rüzgar, Türbin, Seçim, Karar.
89
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Wind Turbine Selection with Analytical Hierarchy Process Aliye Ayça SUPÇİLLER1,*, Akın YILDIZ1 1 Pamukkale University, Denizli, Turkey *Responsible author e-mail:
[email protected]
Abstract The rapid increase in the world population, industrialization, technological tools and equipment concentrated in human life cause the energy consumption to increase very rapidly. Fossil fuel consumption loses its appeal and the demand for renewable energy increases day by day with the developing technology in the world. Electricity generation using wind energy is the most safe and environmentally friendly renewable energy systems. The wind energy potential in our country is quite high. As the wind potential is explored, the number of wind turbine installations increases. The establishment of new wind power plants brings serious costs and the decision-making process is also very difficult. In this study, the decision problem of the most suitable wind turbine according to the desired conditions for an investment firm in Denizli has been addressed. The criteria were determined by reviewing the existing literature and interviewing with the experienced experts of the firm. There are four main criteria such as turbine characteristics, economical factors, environmental issues and supplier performance, and there are a total of seven sub-criteria below them. As a multicriteria decision making method, Analytic Hierarchy Process was applied. The weights for each sub-criterion and the weights for each alternative were computed and an appropriate supplier rank was obtained. Five turbine supplier companies identified in the first stage were evaluated and the most suitable turbine was selected. The T1 turbine was found to be the best alternative. The study has been a good reference for selecting the most suitable turbine for the decision makers and will be further developed by integrating several other criteria-based decision making methods in ranking step. Key words: Analytic Hierarchy Process, Wind, Turbine, Selection, Decision.
90
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Demand and Supply Projectıons of Major Food Grains in Pakıstan Anwar HUSSAİN1,* 1
Pakistan Institute of Development Economics (PIDE), Islamabad, Pakistan * Responsible author e-mail:
[email protected]
Abstract Agriculture sector plays important role in the economy of Pakistan contributing 19% to GDP and employing 45% of the total labour force. Majority of the population lives in rural areas and they are mainly dependent on this sector. The major food grains provided by this sector are rice and wheat. Majority of the wheat produced (about 70%) comes from Punjab province of Pakistan. This staple crop not only meet the growing demand of the local population but fulfil the needs of 10 million population of neighbouring country Afghanistan. Alongside wheat exports, the government also keep significant share (about 8 million tons) of wheat as stock to stabilize prices and supply in the market. Similarly, rice is the main cash crop of Pakistan and is a major source of foreign exchange. The stocks, trade, consumption and production are the significant components of the demand and supply of foodgrains. This approach has also been proposed by Food and Agriculture policy research Institute (FAPRI). However, these are not taken into account in the computation of the demand supply framework. This study projects the demand and supply of wheat and rice which are the major food grains of Pakistan taking into account the trade and stocks variables. For projections, the Holt-Winter forecasting (HWF) model and autoregressive integrated moving average (ARIMA) models have been applied using time series data from 1960 to 2016. The findings revealed that both rice and wheat demand and supply have increasing trend overtime. Besides, the HWF model is more efficient as compared to ARIMA model. The imbalances in the demand and supply may easily be managed by the government through manipulating the stocks and trade of the food grains. Key words: Demand; supply; forecasting; food grains, Holt Winter forecasting, ARIMA.
91
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Bir Turizm Tesisinde Toprak Kaynaklı Isı Pompası Sisteminin İncelenmesi Arif KARABUĞA1*, Melik Ziya YAKUT1, Reşat SELBAŞ1 Süleyman Demirel Üniversitesi, Isparta, Türkiye, *Sorumlu yazar e-posta:
[email protected] 1
Özet Turizmde enerjiye olan ihtiyacın gün geçtikçe artması enerji giderlerindeki maliyet artışına da neden olmaktadır. Bu sebepten dolayı turizm işletmecileri enerji tasarrufunun yanı sıra enerji maliyetini azaltmak için alternatif enerji kaynaklarından yararlanmaktadırlar. Bu çalışmada bir turizm tesisinde ki toprak kaynaklı ısı pompası (TKIP) sisteminin incelenmesi yapılmıştır. Kurulan ısı pompası ile tesisin ısıtma, soğutma ve sıcak su ihtiyacı karşılanmıştır. Elde edilen ısıtma, soğutma ve sıcak su için TKIP’ nın kurulmadan önceki ve kurulduktan sonraki enerji tüketimleri kıyaslanarak elde edilen tasarruf hesaplanmıştır. Bu hesaplamalar yapılırken elektrik birim fiyatı ile motorinin litre birim fiyatı Türkiye’deki 2016 yılı verilerine göre kabul edilmiş ve sonuçlar buna göre değerlendirilmiştir. Bu çalışmanın sonucunda ısı pompası sisteminin kurulumundan öncesindeki ve sonrasındaki ısıtma, soğutma ve sıcak su ihtiyacı için harcanan elektrik ve yakıt giderleri karşılaştırıldığında yaklaşık olarak % 57 oranında tasarruf sağlandığı hesaplanmıştır. Anahtar kelimeler: Isı pompası, Toprak kaynaklı ısı pompası, Termodinamik, Turizm.
92
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Investigation of Ground Source Heat Pump System in a Tourism Planet Arif KARABUGA1*, Melik Ziya YAKUT 1, Resat SELBAS 1 1
Suleyman Demirel University, Isparta, Turkey *Responsible author e-mail:
[email protected]
Abstract The increasing need for energy in tourism causes the increase in the cost of energy expenditures. For this reason, tourism operators benefit from alternative energy sources in order to reduce energy cost as well as energy saving. In the study, a ground source heat pump (GSHP) system in a tourism plant was investigated. With the heat pump, the heating, cooling and hot water requirements of the plant are meet the needs. The energy costs before and after the establishment of GSHP were compared. During these calculations, the electricity unit price and the unit price of the diesel fuel per liter have been accepted according to the year 2016 data in Turkey and the results are evaluated accordingly. As a result of this study, it is estimated that the electricity and fuel expenses spent for heating, cooling and hot water before and after the installation of the heat pump system are saved by approximately 57%. Key words: Heat pump, Ground source heat pump, Thermodynamic, Tourism.
93
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürdürülebilir Tekstil İçin Geri Dönüşüm Merve TÜREMEN1, Aslı DEMİR1,*, Esen ÖZDOĞAN1 Ege Üniversitesi, İzmir, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
Özet Son yıllarda dünya nüfusundaki artış ile birlikte insanların tüketim ihtiyaçları da artmaktadır. Bu durum insanın kaçınılmaz ihtiyacı olan tekstil ürünlerindeki tüketimin artmasını da beraberinde getirmektedir. Bunun yanı sıra hızlı moda akımıyla da birlikte aşırı tüketim problemi de tekstil açısından önemli yere sahiptir. Günümüzde dünyadaki tekstil ve hazır giyim üretimi için lif üretimi 90 milyon tonun üzerindedir. Bu rakamın 2050 yılında 110 bin tonu aşacağı öngörülmektedir. Buna bağlı olarak tekstil ürünlerinin çevre açısından yarattığı etki oldukça fazladır. Bunun önüne geçebilmek için tekstil atıklarının geri dönüşümü kaçınılmaz olmuştur. Tekstil geri dönüşüm endüstrisi aslında dünyanın en eski ve en köklü geri dönüşüm sanayilerinden biridir. Tekstil endüstrisinde 500’den fazla işletme tarafından yıllık 1.250.000 ton tüketici tarafından atılan tekstil atıkları dönüştürülebilmektedir(Tekstil Geri Dönüşüm Konseyi). Ayrıca, tekstil geri dönüşüm endüstrisi toplam atığın %93’lük kısmını yeni tehlikeli atık veya zararlı yan ürün üretimine neden olmadan işlem yapabilmektedir. Tekstil atıkları, tekstil fabrikalarında üretim sürecinde ortaya çıkan veya tüketicilerin tüketim sonrası çıkan atıklardır. Tüketim öncesi atıkları; bir çok endüstri için yeniden üretilen tekstil ürünleri olan liflerden oluşurken, tüketim sonrası atıklar, tüketicinin artık ihtiyaç duymadığı modası geçen ve atmaya karar verdiği, herhangi bir giysi ya da tekstil materyallerinden yapılan ev eşyaları olarak tanımlanır. Tekstilde geri dönüşüm maliyet ve doğal kaynakların giderek azalması açısından bakıldığında, tüm dünya için en iyi alternatif çözüm olanağı olarak karşımıza çıkmaktadır. Evsel atık ve endüstriyel atıklar birlikte değerlendirildiğinde Türkiye’de her yıl yaklaşık olarak 1.155.000 ton civarında tekstil atığının ortaya çıktığı görülmektedir. Bu atıklar, geri kazanılabilir niteliktedir. Tekstil endüstrisinde kullanılmak üzere işlem gören tekstil atıklarının geri dönüştürülmesi için harcanan enerjinin, kirletilen su ve kullanılan kimyasal madde miktarının yeni üretim yapmaya kıyasla çok daha az olduğu belirtilmektedir. Tekstil atıklarının geri kazanım yöntemleri; mekaniksel yöntemler, termomekaniksel yöntemler, kimyasal yöntemler, enerji elde etme, diğer yöntemler olmak üzere beşe ayrılmaktadır. Türkiye’de tekstil atıklarının geri kazanım yöntemlerine bakıldığında, %19 nonwoven-keçe, %7 granül, %30 atıklardan tülbent elde etme, %44 atıklardan iplik elde etme olarak ayrılmaktadır.
Tekstil geri dönüşüm endüstrisinde kullanılmış tekstil liflerinden elde edilen ürünler yeni yeni canlanıp katma değer yaratmaya başlamıştır. Tekstil üretim, kullanım ve geri dönüşüm aşamaları önemli kirlilik kaynakları olup bu konu ile ilgili bilgi ve farkındalık eksikliği bulunmaktadır. Bu nedenle, tekstil işletmelerinde atık kontrolü adım adım ele alınmalı ve optimum koşullar sağlanmalıdır. 94
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Atıklar sınıflandırılarak biriktirilmeli ve değerlendirilmelidir. Tekstil geri dönüşümünden elde edilen ürün çeşitliliği ve kullanım alanlarının geliştirilmesi gerekmektedir. Anahtar kelimeler: Geri dönüşüm, tekstil, sürdürülebilirlik.
95
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Recycling For Sustainable Textile Merve TÜREMEN1, Aslı DEMİR1,*, Esen ÖZDOĞAN1 1
Ege University, Izmir, Turkey *Responsible author e-mail:
[email protected]
Abstract In recent years, along with the increase in the world population, the consumption needs of people are also increasing. This situation is accompanied by an increase in the consumption of textile products. Besides, the problem of over consumption together with the fast fashion trend is also important in terms of textile. Today, fiber production for textile and garment production in the world is over 90 million tons. It is predicted that this figure will exceed 110 thousand tons in 2050. As a result, the environmental impact of textile products is quite high. To avoid, the recycling of textile waste has become inevitable. The textile recycling industry is indeed one of the oldest and deepest recycling industries in the world. Textile waste disposable by 1,250,000 tons of consumer per year can be converted by more than 500 enterprises in the textile industry. In addition, the textile recycling industry can process 93% of the total waste without causing new hazardous waste or harmful by-product production. Textile wastes are wastes produced in the production process of textile factories or after consumption of consumers. Pre-consumer waste; is made up of fibers which are remanufactured textile products for many industries, while post-consumer waste is defined as household goods made from any garment or textile material that has no longer needed and that the consumer decides to throw it. Given the cost of recycling textiles and the increasingly scarce nature of natural resources, the challenge is the best alternative solution for the entire world. When domestic waste and industrial wastes are evaluated together, it is seen that approximately 1,155,000 tons of textile waste has emerged in Turkey every year. These wastes are recoverable. It is stated that the amount of energy consumed for the recycling of textile wastes treated for use in the textile industry is much less than the amount of polluted water and chemicals used. Methods of recovery of textile waste; mechanical methods, thermomechanical methods, chemical methods, energy acquisition, other methods. When we look at the recovery methods of textile wastes in Turkey, 19% nonwoven felt, 7% granule, 30% wastes from the web, 44% waste from yarn is obtained. In the textile recycling industry, products derived from used textile fibers have just begun to emerged and provide added value. Textile production, use and recycling stages are important pollution sources and there is lack of information and awareness about this subject. For this reason, waste management in textile enterprises should be handled step by step and optimum conditions must be ensured.Wastes must be classified and assessed. The range of products obtained from textile recycling and areas of use need to be improved. Key words: recycling, textiles, sustainability.
96
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sliding Friction and Wear Performance of the Nano-Bioceramic α Al2O3 Prepared by High Energy Milling Omar ASSALA1,*, Mounia BELAID1,*, Mamoun FELLAH 2 1
Laboratory of Metallurgy and Engineering Materials, University of Annaba, PO Box12, Annaba, 23000, Algeria. 2 Mechanical engineering department, Abbes Laghrour University, Khenchela. Algeria * Responsible author e-mail :
[email protected],
[email protected]
Abstract The structural evolution and morphological changes of the nanostructured αAl2O3powder using different milling times (1, 8, 16 and 24 h) were studied. It is observed that the crystallite size of the particles reduced to 2 nm after milling for 24 h. Morphological studies of powder particles indicated that the powder particle size continuously decreases with increasing milling time. The sliding wear rate and wear coefficient of friction were lower in the nanocrystalline samples milled at 24 h at same applied load (3, 6 or 10 N). The improved friction and wear resistance is attributed to the finer microstructure of the sample milled for 24 h. Key words: Sliding friction, sliding wear, nanobioceramique, wear testing, nanotribology.
97
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Gömülü Sistem Tabanlı Otomatik Meteoroloji Hava İstasyonu Tasarımı Kadir SABANCI 1,*, Aycan KONURALP 2,4, Selmin ENER RUSEN 3,4,* Karamanoğlu Mehmetbey Üniversitesi, Elektrik Elektronik Mühendisliği bölümü, Karaman,Türkiye Karamanoğlu Mehmetbey Üniversitesi, Fen Blimleri Fakültesi, İleri Teknolojiler, Karaman,Türkiye 3 Karamanoğlu Mehmetbey Üniversitesi, Enerji Sistemleri Mühendisliği Bölümü, Karaman,Türkiye 4 Academic EnerjiAraştırma Grubu(AKEN), Karamanoglu Mehmetbey Üniversitesi, Karaman, Türkiye *Sorumlu yazarlar e-posta:
[email protected],
[email protected] 1
2
Özet Doğru olarak belirlenen atmosferik bilginin tüm güneş uygulamaları, çiftçinin ekim için en iyi zamanı tespit etmesi, iklim, havaalanı kontrol kulesi ve hava tahmini gibi farklı uygulamalar için önemli olacağı açıktır. Bu çalışmada, asıl amaç, daha az insan çabasıyla doğru hava bilgilerini elde etmek ve maliyeti önemli ölçüde azaltmaktır. Bu amaca ulaşmak için, hava sıcaklığı, bağıl nem ve barometrik basıncı gibi meteorolojik verileri ölçebilen basit bir otomatik meteoroloji hava istasyonu bir Arduino board kullanarak geliştirilmiş ve test edilmiştir. Önerilen sistemde, DHT11 sensöründen elde edilen sıcaklık ve nem değerleri ve DS1302 Gerçek Zamanlı Saat modülünden elde edilen zaman bilgisi kullanılmıştır. Barometrik basınç BMP180 dijital sensör kullanılarak elde edilmiştir. Ayrıca, ölçülen hava parametreleri, SD kart modülü kullanılarak bir dosya şeklinde SD karta kaydedilmiştir. Bu dosyalara bir bilgisayardan da erişilebilmektedir. Önerilen sistemin veri sonuçları Karaman'daki Meteoroloji İstasyonunun veri değerleri ile karşılaştırılmıştır. Elde edilen ön sonuçlar, önerilen meteorolojik sistemin iyileştirilmesine ilişkin daha ileri çalışmalar için ümit vericidir. Anahtar kelimeler: Meteoroloji Hava İstasyonu, Arduino, Sensör.
98
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Embedded System Based Automatic Meteorological Weather Station Design Kadir SABANCI1,*, Aycan KONURALP 2, Selmin ENER RUSEN 3 1
Karamanoğlu Mehmetbey University, Department of Electrical and Electronics Engineering, Karaman, Turkey 2 Karamanoğlu Mehmetbey University, Faculty of Science, Department of Advanced Technologies, Karaman, Turkey 3 Karamanoğlu Mehmetbey University, Department of Energy Systems Engineering, Karaman, Turkey 4 Academic Energy Research Grup(AKEN), Karamanoglu Mehmetbey University, Karaman, Turkey *Responsible authors e-mail:
[email protected],
[email protected]
Abstract It is obvious that knowing the accurate atmospheric condition can be important for different applications such as all solar applications, the farmer the best time to plant, climate, an airport control tower and forecasting of weather. In this study, the main objective is to obtain accurate weather information with less human efforts and cost has been reduced significantly. In order to achieve this aim, a simple automatic meteorological weather station has been developed and tested by using an Arduino board to measure the meteorological data, including air temperature, relative humidity, and barometric pressure. The proposed system has used the temperature and humidity values obtained from the DHT11 sensor and the time from the DS1302 Real Time Clock module. Barometric pressure value has been obtained by using BMP180 digital sensor. Also, measurements of the current weather parameters have been stored in the SD card as a file using the SD card module. That files could be also accessed from a PC. The data results of the proposed system have been also compared with the data values of Meteorological Station in Karaman. Obtained preliminary results are encouraging for the further studies on the improvement of the proposed meteorological system. Key words: Meteorology Weather Station, Arduino, Sensor.
99
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Tabakalı Kompozitlerde Farklı Tabaka Dizilimlerinin Eğilme Rijitliğine Etkisi Aydın GÜNEŞ1,*, Ömer Sinan ŞAHİN1 Selçuk Üniversitesi, Makine Mühendisliği Bölümü, Konya, Türkiye *Sorumlu yazar e-posta:
[email protected]
1
Özet Bu çalışmada üzerinde yüzey çatlağı bulunan hibrid tabakalı kompozit malzemelerin dinamik davranışı ve eğilme rijitliği araştırılmıştır. Hibrid tabakalı kompozit malzemeler 18 tabakalı ve 90x25 mm ebatlarında olup iki farklı tabaka dizilimine sahiptir. Düşük hızlı darbeler hibrid tabakalı kompozit malzemelere 2,5 m/sn hızda a/t=0,3 ve a/c=0,3 yüzey çatlağı parametrelerinde uygulanmıştır. Sonuçlar deplasman-zaman ve kuvvet-deplasman grafikleri şeklinde sunulmuştur. Bu çalışma sonucunda farklı tabaka dizilimlerinin eğilme rijitliğine etkisi incelenmiştir. Anahtar kelimeler: Kompozit, eğilme rijitliği, darbe.
100
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Effect Of Different Stacking Sequenze On Bending Stiffness Of Laminated Composites Aydın GÜNEŞ1*, Ömer Sinan ŞAHİN1 1
Selcuk University, Mech. Eng. Dept., Konya, Turkey *Responsible author e-mail:
[email protected]
Abstract In this study, dynamic response and bending stiffness behavior of hybrid laminated composite plates with surface crack were investigated. Hybrid laminated composites has 18 layers and 90x25 mm size with two different stacking sequenze. The low velocity impact test of hybrid laminated composites carried on 2.5 m/sec with a/t=0.3 and a/c=0.3 surface crack parameters. The results are presented as the change of displacement-time and force-displacement graphs. As a result of this study, effects of stacking sequence on hybrid composite plates were analysed. Keywords: Composite, bending stiffness, impact.
101
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Atık Bronz Talaşlarının Geri Dönüştürülmesi Aydın GÜNEŞ1*, Abdullah ASLAN1, Emin SALUR1, Ömer Sinan ŞAHİN1 Selçuk Üniversitesi, Makine Mühendisliği Bölümü, Konya, Türkiye *Sorumlu yazar:
[email protected]
1
Özet Bu çalışmada atık halde ki metal talaşlarının izostatik sıcak presleme yöntemi ile tekrardan geri dönüştürülmesi araştırıldı. Çalışmalarda atık bronz (CuSn10) talaşlarının uygun boyutlara getirilmesi sonrasında belirlenen sıcaklık ve basınçlarda sıcak preslenmesi ile kompozit malzemeler üretildi. Üretilen malzemelerin brinell sertliği, gözeneklilik ve mikro yapı özellikleri incelenerek döküm bronzla kıyaslandı. Anahtar kelimeler: Atık metal talaşı, geri dönüşüm, sıcak presleme.
102
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Recycling of Waste Bronze Chips Aydın GÜNEŞ1*, Abdullah ASLAN1, Emin SALUR1, Ömer Sinan ŞAHİN1 1
Selcuk University, MechanicalEngineeringDept., Konya, Turkey * Responsible author e-mail:
[email protected]
Abstract In this study, recycling of waste metal chips was investigated by recycled isostatic hot pressingmethod. After the waste bronze (CuSn10) chips were brought to the appropriate dimensions, materials were produced by hot pressing at the determined temperatures and pressures. Brinell hardness, porosity and microstructure properties of the produced material were examined and compared with cast bronze. Key words: Waste metal chip, recycle, hot pressing.
103
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Alternative Tourism and Sustainable Tourism Effects Ayhan SAYĞI1,*,Hülya SAYĞI 1, Mehtap BAYKAL1 1
Cukurova University Yumurtalık Vocational School,, Adana, Turkey *
Responsible author e-mail:
[email protected]
Abstract Thanks to the technology developed today, transportation and communication have gained incredible speed. Now, even at very short intervals of time, people have the opportunity to come and go where they want to be and to be knowledgeable. These changes in transportation and communication have inevitably changed the world's tourism concept radically from the fact that the transportation concept that constitutes the main activity of tourism activities and transportation and communication opportunities for obtaining information are so fast and easy. Nowadays, for those who participate in tourism activities, the classical tourism regions are inadequate and people demand different experiences. This new trend in tourism, which is expressed by the concept of alternative tourism, has increased the demand for tourism, especially those that have not been able to reach and obtain information beforehand. Thanks to advanced technologies, tourism activities that have been costly in advance have become more affordable and have increased the potential for participation in tourism activities. Alternative tourism has made it possible to spread the tourism activities in a certain time and place by preventing it from concentrating and spreading to every place. At the same time, this change has minimized the adverse effects of tourism activities at a certain time and place on the tourism resources, which in general means that our resources are limited in every area and that we have to protect our resources while considering our future generations The notion of sustainability also applies to tourism activities. Key words: Sustainable Tourism, Alternative Tourism, Transportation and Communication.
104
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Importance of Human Resources in Sustaınable Tourısm Ayhan SAYĞI1,*,Hülya SAYĞI 1, Mehtap BAYKAL1 1
Cukurova University Yumurtalık Vocational School,, Adana, Turkey 1
Responsible author e-mail:
[email protected]
Abstract We can define the concept of tourism economy as a kind of art of creation. For a better understanding of this concept, it is necessary to recall the definition of noneconomic goods (free goods). Non-economic goods are goods that are ready in the country and require no effort for production. Weather, daylight, rivers, culture and natural beauties we breathe in our surroundings. From this point of view, we can say that many of the elements that we can define as tourism product are close to the definition of noneconomic goods and that these goods are converted into economic values through tourism activities. Tourism in this direction also brings an economy to the city. The basic input of this economy is natural and cultural assets, while the output is largely a result of the process of human labor. It is a simple economic activity that is growing at an enormous size every year. We can talk about many advantages that the tourism economy can not be ignored, but basically the greatest benefit of the tourism economy is the ability to solve with the feature of being a sector based on labor-intensive service production. It represents 10.2% of the world's GDP with a value of $ 7.6 trillion, according to the data of the year 2016, with sectors that are directly and indirectly affected by the world economy in terms of the tourism economy. Again in terms of world economy, the tourism economy employs 292 million people compared to 2016, which is equal to 1 in 10 of the world's employment. In terms of tourism, the most important function of the country is the contribution it has made to solve the problem of unemployment. In addition, most jobs do not require skilled people to be employed. However, this can be misleading. In order for the tourism economy to continuously produce the benefits expected from it, the human resources that make up these activities should be developed in line with world standards. In this sense, the basic requirement for sustainable tourism is to create, develop and protect human resources in a sustainable structure. Key words: Sustainable Tourism, Unemployment, Employment, Human Resources.
105
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Karaman’da Bir Evin Elektrik İhtiyacının Şebeke Bağlantılı Fotovoltaik Sistem ile Karşılanması Ayhan VANLIOĞLU 1,2*, Buket BEZGİN ÇARBAŞ1,2, Selmin ENER RUŞEN1,3 Enerji Sistemleri Mühendisliği, Karamanoğlu Mehmetbey Üniversitesi, 70100 Karaman, TÜRKİYE İletken Polimerler ve Enerji Uygulamaları Laboratuvarı, Karamanoğlu Mehmetbey Üniversitesi, 70100 Karaman, TÜRKİYE 3 Karamanoğlu Mehmetbey Üniversitesi, Akademik Enerji Çalışma Grubu (AKEN), Karaman 1
2
* Sorumlu yzar e-posta:
[email protected] ,
[email protected] ,
[email protected]
Özet Bu çalışmada Karaman ili şartlarında çatı tipi FV (fotovoltaik) sistemler araştırılmıştır. Bir ailenin ekonomik olarak daha hesaplı ve çevre dostu bir sistem ile elektrik ihtiyacının karşılanması sağlanarak amacıyla belirlenen şartlara en uygun sistem teknik ve ekonomik yönden incelenerek seçilmiştir. Seçilen sistemin performansı Karaman iklim şartlarında aylık ortalama günlük güneş radyasyonu değerleri ve güneşlenme süreleri baz alınarak hesaplanmıştır. Analiz ve hesaplamalarda Elektrik işleri Etüt İdaresi(EİAŞ), Meteoroloji Genel Müdürlüğü resmi internet sitesinden ve Meram Elektrik Dağıtım A.Ş.’ den(MEDAŞ) bölgeye özgü değerler kullanılmıştır. Tasarlanan güneş enerjisi sisteminde şebeke bağlantılı (on-grid) sistem kullanılmıştır. Ekonomik analizi ve basit geri ödeme süresi hesaplanmıştır. Bu sistemde direk şebekeye elektrik ilettiği için enerji depolama maliyeti olmamaktadır. Çalışma sonuçları, Karaman ili şartlarında çevre dostu bir sistem ile elektrik ihtiyacının karşılanmak ve fazla üretilen elektriği satmak isteyen yatırımcı için bir referans model oluşturmaktadır. Anahtar kelimeler: Fotovoltaik Teknoloji, Ekonomik Analiz, Çift Yönlü Sayaç, Karaman.
106
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Maintaining a Home in Karaman Electricity Needed with GridConnected Photovoltaic System Ayhan VANLIOĞLU 1,2*, Buket BEZGİN ÇARBAŞ1,2, Selmin ENER RUŞEN1,3 1
Department of Energy Systems Engineering, Karamanoglu Mehmetbey University, Karaman, Turkey 2 Conductive Polymers and Energy Applications Laboratory, Karamanoglu Mehmetbey University, Karaman, Turkey 3 Karamanoğlu Mehmetbey Üniversitesi, Academic Energy Working Group(AKEN), Karaman, Turkey * Responsible author e-mail:
[email protected] ,
[email protected] ,
[email protected]
Abstract In this study, roof type FV (photovoltaic) systems were investigated in Karaman province. A family is selected by examining the most suitable system in terms of technical and economic direction in order to meet the requirements for electricity by providing economical and more economical and environmentally friendly system. The performance of the selected system is based on monthly average daily solar radiation values and sunshine durations in Karaman climate conditions. In the analysis and calculations, values specific to the region were used from the Electricity Affairs Survey Administration (EİAŞ), the General Directorate of Meteorology official website, and Meram Electricity Distribution Inc. (MEDAŞ). On-grid system was used in the designed solar energy system. Economic analysis and simple payback time are calculated. In this system, energy is not a storage cost because it directly transmits electricity to the network. The results of the study establish a reference model for the investor who wants to meet the electricity need and sell excess electricity with an environment friendly system in Karaman province. Key words: Photovoltaic Technology, Economic Analysis, Two Way Counter, Karaman.
107
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Meta ve Orto Sübstitüe Anilin Türevi Heterosiklik Disazo Boyarmaddelerin Sentezi ve Sübstitüent, Asit ve Baz Etkisinin İncelenmesi Aykut DEMİRÇALI1,*, Gülnihal ERTEN2, Fikret KARCI3 Pamukkale Üniversitesi, Fen Edebiyat Fakültesi, Kimya Bölümü, Denizli, Türkiye *Sorumlu yazar e-posta:
[email protected]
1
Özet Bu çalışmada meta ve orto köşelerinde elektron verici ve elektron çekici sübstitüe gruplar olan anilin türevleri diazolanmış ve malononitril ile reaksiyona sokularak, arilazo-malononitril (1f-1m) bileşikleri sentezlenmiştir. Sentezlenen bu aril azo malononitril bileşikleri hidrazin monohidrat ile etkileştirilerek 4-arilazo-3,5-diamino-1H-pirazol (2f2m) türevleri elde edilmiştir. Daha sonrasında ise 2f-2m bileşikleri yeniden diazolanmış ve bu bileşiklerin diazonyum tuzları barbitürik asit ile reaksiyona sokularak 5-(3'-amino4'-arilazo-1H-pirazol-5'-il-azo) barbitürik asit (3f-3m) bileşikleri oluşturulmuştur. Elde edilen 5-(3'-amino-4'-arilazo-1H-pirazol-5'-il-azo) barbitürik asit (3f-3m) bileşiklerinin yapıları AT-IR, 1H-NMR ve UV-Vis. spektroskopisi gibi yöntemlerle karakterize edilmiştir. Ayrıca bu 8 bileşiğin farklı çözücülerdeki asit, baz ve sübstititüent etkileri incelenmiştir. Anahtar kelimeler: Sübstitüe Anilin, Diazolama, Heterosiklik Bileşik, Pirazol, Barbitürik asit.
108
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Synthesis of Meta and Ortho Substituted Aniline Derivative Heterocyclic Disazo Dyes and Investigation of Substituent, Acid and Base Effect Aykut DEMİRÇALI1,*, Gülnihal ERTEN2, Fikret KARCI3 1
Pamukkale University, Faculty of Science and Art, Department of Chemistry, Denizli, Turkey *Responsible author e-mail:
[email protected]
Abstract In this study, the aniline derivatives which are electron donating and electron attracting substituent groups at the meta and ortho angles were diazotized and reacted with malononitrile to synthesize aryl-azo-malononitrile (1f-1m) compounds. These synthesized aryl azo malononitrile compounds were reacted with hydrazine monohydrate under reflux to obtain 4-arylazo-3,5-diamino-1H-pyrazole (2f-2m) derivatives. Subsequently, the 2a2m compounds were again diazotized and the diazonium salts of these compounds were reacted with barbituric acid to form 5- (3-amino-4-arylazo-1H-pyrazol-5-yl-azo) barbituric acid compounds (3f-3m). The structures of 5- (3'-amino-4'-arylazo-1Hpyrazole-5'-yl-azo) barbituric acid (3f-3m) compounds were characterized by methods such as AT-IR, 1H-NMR and UV-Vis. spectroscopies. Also, acid, base and substitutent effects of these 8 compounds in different solvents have been investigated. Key words: Substituted aniline, Diazotisation, Heterocyclic compound, Pyrazole, Barbituric acid.
109
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Anilin ve Para Sübstitüe Anilin Türevlerinden Yeni Heterosiklik Disazo Boyarmaddelerin Sentezi ve Absorpsiyon Özelliklerinin İncelenmesi Aykut DEMİRÇALI1,*, Gülnihal ERTEN2, Fikret KARCI3 Pamukkale Üniversitesi, Fen Edebiyat Fakültesi, Kimya Bölümü, Denizli, Türkiye *Sorumlu yazar e-posta:
[email protected]
1
Özet Yapılan bu bilimsel çalışma çerçevesinde, anilin ve p-sübstitüe anilin türevleri diazolanmış ve malononitril ile reaksiyona sokularak, aril-azo-malononitril (1a-1e) bileşikleri sentezlenmiştir. Sentezlenen bu aril azo malononitril bileşikleri geri soğutucu altında hidrazin monohidrat ile etkileştirilerek 4-arilazo-3,5-diamino-1H-pirazol (2a-2e) türevleri elde edilmiştir. Daha sonrasında ise 2a-2e bileşikleri yeniden diazolanmış ve bu bileşiklerin diazonyum tuzları barbitürik asit ile reaksiyona sokularak 5-(3'-amino-4'arilazo-1H-pirazol-5'-il-azo) barbitürik asit (3a-3e) bileşikleri oluşturulmuştur. Elde edilen 5-(3'-amino-4'-arilazo-1H-pirazol-5'-il-azo) barbitürik asit (3a-3e) bileşiklerinin yapıları AT-IR, 1H-NMR ve UV-Vis. spektroskopisi gibi yöntemlerle karakterize edilmiştir. Sonuç olarak azo boyarmadde ve tekstil literatürüne pirazol ve barbitürik asit halkası içeren 13 adet yeni dispers disazo boyarmaddeleri kazandırılmıştır. Anahtar kelimeler: Diazolama, Heterosiklik Bileşik, Pirazol, Barbitürik asit.
110
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Synthesis and Absorption Characteristics of New Heterocyclic Disazo Dyes from Aniline and Para Substituted Aniline Derivatives Aykut DEMİRÇALI1,*, Gülnihal ERTEN2, Fikret KARCI3 1
Pamukkale University, Faculty of Science and Art, Department of Chemistry, Denizli, Turkey *Responsible author e-mail:
[email protected]
Abstract In this scientific work, aniline and p-substituted aniline derivatives were diazotized and reacted with malononitrile to synthesize aryl-azo-malononitrile (1a-1e) compounds. These synthesized aryl azo malononitrile compounds were reacted with hydrazine monohydrate under reflux to obtain 4-arylazo-3,5-diamino-1H-pyrazole (2a-2e) derivatives. Subsequently, the compounds 2a-2e were again diazotized and the diazonium salts of these compounds were reacted with barbituric acid to form 5- (3-amino-4-arylazo1H-pyrazol-5-yl-azo) barbituric acid compounds (3a-3e). The structures of 5- (3'-amino4'-arylazo-1H-pyrazole-5'-yl-azo) barbituric acid (3a-3e) compounds were characterized by methods such as AT-IR, 1H-NMR and UV-Vis. spectroscopies. As a result, 13 new disperse disazo dyes containing pyrazole and barbituric acid ring were added to azo dyestuff and textile literature. Key words: Diazotisation, Heterocyclic compound, Pyrazole, Barbituric acid.
111
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Kentlerin Sürdürülebilirliği ve Sürdürülebilir Kentleşmede Belediyelerin Rolü Aysun YEMEN1,*, Nilüfer NEGİZ2 Aksaray Üniversitesi, Siyaset Bilimi ve Kamu Yönetimi Bölümü, Aksaray, Türkiye Süleyman Demirel Üniversitesi, Siyaset Bilimi ve Kamu Yönetimi Bölümü, Isparta, Türkiye *Sorumlu Yazar e-posta:
[email protected] 1
2
Özet Çevrenin gelecek nesillere sağlıklı bir şekilde aktarılması için bir takım önlemlerin alınması gerekmektedir. Bu konuda 1980’li yıllara kadar önemli çalışmalar yapılmamıştır. Fakat artan sanayileşme, artan nüfus ve gelişen teknoloji çevrenin tahrip edilmesini hızlandırmıştır. Bu noktada ülkeler, gerek ulusal gerekse uluslar arası boyutta önlemler almak zorunda kalmışlardır. “Sürdürülebilirlik” kavramı bu önlemler tartışmasında karşımıza çıkmaktadır. Sürdürülebilirlik, ekosistemindeki tüm çeşitliliğin ve yenilenemeyen kaynakların gelecek nesillere aktarılabilmesi için, insanın ekosistem üzerindeki olumsuz etkilerinin sistemin taşıma kapasitesinin üzerine çıkmayacak düzeyde tutulmasıdır (Ercoşkun, 2007:9). Sürdürülebilir bir toplumdan sürdürülebilir bir çevreye doğru bir süreç olarak da ifade edebileceğimiz bu kavram, genellikle kalkınma ile birlikte anılmaktadır. Sürdürülebilir kent ya da kentlerin sürdürülebilirliği; kentlerin çevre ile uyumlu bir ilişki içinde olmasını ifade etmektedir. Sürdürülebilir kent, “kentsel ihtiyaçlarının yerel ve küresel kaynakların sürdürülebilirliğine zarar vermeden giderilmesi” olarak değerlendirilebilir (Akçakaya, 2016: 53). Bir başka ifadeyle ekonomik, sosyal ve fiziki sistemlerin yüksek yaşam kalitesi sağlamak amacı yanında çevreye en az yük olabilecek şekilde, sürdürülebilir bir sosyal tabana da dayanarak uygun kentsel politikalarda içselleştirildiği kent veya kentsel alanlar olarak tanımlanabilir (Palabıyık, 2005:611). Belediyeler, kentlerde kentliye en yakın birim olmaları ve yüklendikleri kentsel hizmetler düşünüldüğünde, kentlerin geleceğinin planlanmasında en önemli aktör olarak karşımıza çıkmaktadır. Bu bağlamda çalışmada, “kentsel sürdürülebilirlik uygulamaları” açısından belediyelerin durumu tartışmaya açılarak, Isparta ve Burdur kentleri özelinde bu uygulamaların varlığı-yokluğu üzerinden bir durum incelemesi yapılması planlanmaktadır. Anahtar kelimeler: Kent, Sürdürülebilirlik, Sürdürülebilir Kent, Kentsel Sürdürülebilirlik Uygulamaları.
112
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Sustainability of Cities and The Role of Municipalities in Sustaninable Urbanization Aysun YEMEN1,*, Nilüfer NEGİZ2 1 Aksaray University, Political Science and Public Administration, Aksaray,, Turkey Süleyman Demirel University, Political Science and Public Administration, Isparta, Turkey *Responsible author e-mail:
[email protected]
2
Abstract Sundry preventions must be taken in order to pass the enviroment on future generations in a good way. There have been no clear studies in this regard until 1980's. But increased industrialization, population and the evolving technology has accelerated the destruction of enviroment. At this point, countries have to take preventions in national and international dimensions. The concept of "sustainability" has rised up in these disussions of preventions. Sustainability is to keep the negative effects of humanity on ecosystem at a moderrate level not to get over the capacity of the system, but just to pass the whole diversity and non-renewable resources to future generations (Ercoşkun, 2007: 9). This concept that w emay define as a process which circulates from a sustainable society to a sustainable environment, is usually associated with the concept of development. Sustainable city or the sustainablity of the cities highligts the compatible relationship between cities and environment. Sustainable city can be defined as “ to meet the urban needs without harming the sustainablity of local and global resources” (Akçakaya, 2016: 53). Sustainable city on other words, can be defined as the urban or urban areas where urban politics which have sustainable social basement are interrelated as they will have the minimum damage to environment while they aim to provide a good life quality to citizens (Palabıyık, 2005: 611). Municipalities are most important actors in planning the futures of the cities when it is tought that they are the losest units to the public with a huge responsibilty pf public services. In this context, the situation of municipalities is discussed in terms of "urban sustainability practices" and it is planned to conduct a case study on Isparta and Burdur cities through the existence of these practices. Key words: Urban, Sustainability, Sustainable City, Urban Sustainability Practices.
113
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Metronidazol ve Metaklopramit Etken Maddelerinin Çoklu Doğrusal Regresyon İle Tayini A. Merve AKKAYA1,*, Güzide Pekcan ERTOKUŞ2 Süleyman Demirel Üniversitesi, Isparta, Türkiye Süleyman Demirel Üniversitesi, Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2
Özet Metronidazol (C6H9N3O3) helicobacter pylori, periodontal hastalıklar, anaerob bakteriler, protozoa tedavisinde kullanılan antibiyotik bir ajandır. Vucüttaki bakterilere karşı görev alır. Metaklopramit (C14H23Cl2N3O2) genellikle mide ve yemek borusu rahatsızlıklarında kullanılan bir ilaç aktif maddesidir. Bu çalışmada metoclopramit ve metronidazol ‘un miktar tayinini spektrofotometrik verilerden yararlanarak yeni bir istatistik yöntem olan kemometri ile hesaplanmıştır. Çalışmamızda yer alan kemometri metodu ile doğru bir deneysel tasarım üzerinden gidilerek deneme-yanılma metoduyla kaybedilen zaman ve iş kaybının önüne geçilerek güvenilir sonuçlar elde edilmiştir. Birçok insanın ilaç olarak kullandığı metronidazol ve metaklopramit maddelerinin sağlık açısından analizini aynı zamanda klasik yöntemle de değerlendirerek, klasik ve yeni geliştirilen spektrofotometrik -kemometrik yöntem ile istatistiksel olarak kıyaslanması sağlanmıştır.
Anahtar kelimeler: Metronidazol, Metaklopramid, Kemometri.
114
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Determination of Metronidazole and Metaclopramide Active Substances by Multiple Linear Regression A. Merve AKKAYA1,*, Güzide Pekcan ERTOKUŞ2 1
Suleyman Demirel University, Isparta, Turkey Suleyman Demirel University, Isparta, Turkey *Responsible author e-mail:
[email protected] 2
Abstract Metronidazole (C6H9N3O3) Helicobacter pylori, periodontal disease, anaerobic bacteria, an antibiotic agent used in the treatment of protozoa. It acts against the host bacteria. Metaclopramide (C14H23Cl2N3O2) is a drug active substance commonly used in stomach and food borne disorders. In this study, the quantitative determination of metoclopramide and metronidazole was calculated by using a new statistical method, chemometry, using spectrophotometric data. By using the chemometry method in our study, we went through an accurate experimental design and obtained reliable results by avoiding loss of time and work lost by trial-and-error method. The statistical comparison of the metronidazole and metaclopramide substances used by many people as medicines with classical and newly developed spectrophotometric-chemometric methods has also been achieved by analyzing the health aspects of the substances in the same way. Key words: Metronidazole, Metaclopramide, Chemometry.
115
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Klaritromisin, Amoksisilin ve Lansoprazol Etken Maddelerinin Eş Zamanlı Spektrofotometrik Olarak Tayini A. Merve AKKAYA1,*, Güzide Pekcan ERTOKUŞ2 Süleyman Demirel Üniversitesi, Isparta, Türkiye Süleyman Demirel Üniversitesi, Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2
Özet Kronik aktif gastrit ve peptik ülser hastalığında patogenetik rolü olan Helicobacter Pylorinin (HP) yok edilmesi için kullanılan klaritromisin, amoksisilin ve lansoprazol etken maddelerinin eş zamanlı spektrofotometrik olarak tayini kemometrik olarak gerçekleştirilmiştir.. Helicobacter Pylorinin (HP) nin tek ilaçla tayini mümkün olmadığından üçlü ya da dörtlü ilaç kombinasyonları kullanılarak tedavisi sağlanmaktadır. Bu nedenle üç ilaç bileşiminin yer aldığı yeni bir kombinasyonda miktar tayinlerini kemometrik yöntemin de üstünlüklerinden yararlanarak yapmak bize kolaylık sağlayamaktadır. Kemometri programı ile daha önce ilaç sanayinde kullanılan klasik yöntemlere göre alternatif, daha hızlı ve düşük maliyetli yeni bir yöntem geliştirilmiştir. Kemometrik tekniklerle, karmaşık sistemlerin bile herhangi bir ön ayırma işlemine tabi tutulmadan, olduğu gibi spektrofotometrik olarak analizine olanak sağlar, bu kolaylığı Helicobacter Pylorinin (HP) eradikasyonu için kullanılan klaritromisin, amoksisilin ve lansoprazol etken maddelerinin eş zamanlı tayini için kullanarak istatistiksel olarak daha güvenilir sonuçlar elde edilmiştir. Anahtar kelimeler: Klaritromisin, Amoksisilin, Lansoprazol, Kemometri.
116
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Simultaneous Spectrophotometric Determination of Clarithromycin, Amoxicillin and Lansoprazole Active Ingredients A. Merve AKKAYA1,*, Güzide Pekcan ERTOKUŞ2 1
Suleyman Demirel University, Isparta, Turkey Suleyman Demirel University, Isparta, Turkey *Responsible author e-mail:
[email protected] 2
Abstract Simultaneous spectrophotometric determination of clarithromycin, amoxicillin and lansoprazole agents used for the destruction of Helicobacter pylori (HP), which has a pathogenic role in chronic active gastritis and peptic ulcer disease, has been carried out chemometrically. Since Helicobacter pylori (HP), Treatment is provided using quadruple drug combinations. For this reason, it is convenient for us to make quantitative determinations by using the advantages of the chemometric method in a new combination of three drug compounds. With the chemometry program, an alternative, faster and less costly method has been developed than the conventional methods used in the pharmaceutical industry. With chemometric techniques, even complex systems can be analyzed spectrophotometrically, without any pre-separation, resulting in statistically more reliable results using this simplicity for the simultaneous identification of clarithromycin, amoxicillin and lansoprazole agents used for eradication of Helicobacter pylori (HP). Key words: Clarithromycin, Amoxycillin, Lansoprazole, Chemometry.
117
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürdürülebilir Kentsel Gelişme Çerçevesinde Kapalı Konut Yerleşkeleri; Antalya Örneği Ayşe YILDIRIM1,* Akdeniz Üniversitesi, Antalya, Türkiye *Sorumlu yazar e-posta: ayildirimakdeniz.edu.tr 1
Özet Günümüzde dünya üzerinde gerçekleşen hemen hemen her eylemde enerji tüketilmektedir. Bu enerjilerin büyük bir kısmı sonlu (dönüşümsüz, tükenebilir) enerjilerden sağlanmaktadır. Tükenebilir enerjilerin zararlarının boyutları insan sağlığını tehdit edecek seviyelere ulaşmıştır. Bu enerjilerin alternatifi olan yenilenebilir enerjilerin doğada var olduğu bilinmektedir. Yenilenebilir enerjilerin zararları yok denecek kadar azdır ve bu enerjilerden yararlanmak artık zorunlu bir hale gelmiştir. Günümüzde talepleri gittikçe artan kapalı konut yerleşkeleri de tükettikleri enerjilerle oluşan kirlenmelerde ve rezervlerin tükenmesinde oldukça etkilidirler. Bu nedenden dolayı, kapalı konut yerleşkelerinin de yenilenebilir enerji kaynaklarından yararlanabilecek şekilde tasarlanmaları ve enerji tüketen bir unsur olmaktan çıkıp, kendi enerjisini üretebilen birer sistem haline dönüşmeleri zorunlu hale gelmiştir. Bunu sağlayacak en önemli yenilenebilir enerji kaynağı ise güneştir. Bu çalışmada kapalı konut yerleşkelerinin güneş enerjisinden pasif yararlanma olanakları incelenmekte ve bunların uygulama biçimleri örnek çizimlerle ve fotoğraflarla açıklanmaktadır. Anahtar kelimeler: Sürdürülebilir Gelişme, Güneş Enerjisi Sürdürülebilir Kentsel Gelişme, Kapalı Konut Yerleşkeleri.
118
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Gated Comminities in Sustainable Urban Development Framework; Example Antalya Ayşe YILDIRIM1,* 1
Akdeniz University, Antalya, Turkey * Responsible author e-mail: ayildirimakdeniz.edu.tr
Abstract Today, energy is consumed in almost every action that occurs throughout the world. A large part of this finite energy (irreversible, depletable) comes from energy. The size of the loss of exhaustible energy reached levels that threaten human health. It is known that there is an alternative energy in the nature of renewable energy. Is almost no loss of renewable energies and take advantage of this energy has now become mandatory. In today's increasing demand for gated comminities it is also caused by the depletion of the reserves of energy consumed and pollution are quite effective. For this reason, also be an element of gated comminities designed consuming way they could benefit from renewable energy sources and energy out, it has become imperative for transformation into a system that can generate its own energy. The most important renewable energy source is the sun that will allow it. This study is examining the possibilities to benefit from passive solar energy and their applications in the form of gated comminities are explained with pictures and examples drawing. Key words: Sustainable Development, Solar Energy, Sustainable Urban Development, Gated Communities.
119
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Bir Sosyalleşme Aracı Olarak Sanal Cemaatler ve Kadın İmajının Yeniden İnşası Ayşen KARATAŞ1,*, H.Eylem KAYA2 1
Süleyman Demirel Üniversitesi Sosyoloji Bölümü Yüksek Lisans Öğrencisi, Isparta, Türkiye 2 Süleyman Demirel Üniversitesi Sosyoloji Bölümü Öğretim Üyesi, Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected]
Özet Günümüz toplumunun teknoloji ile bütünleşen yapısında öne çıkan özelliği, üretilen tüm bilgilerin paylaşılabilir ve değişebilir olmasıdır. Toplumsal alanda yaşanan radikal gelişmelerin etkileri ise ekonomik, siyasal, sosyal ve kültürel alanlarda gerçekleşen değişimler olarak kendini göstermektedir. Bu değişim sürecinin merkezinde; sosyal paylaşım ağları, yeni iletişim araçları, dijital teknoloji araçlarının geniş kitlelere hitap edebilme potansiyeli ve bireylerin sürece katılımı yer almaktadır. Gelişen teknolojik gelişmelere bağlı olarak, sosyal ağlara ilgi ve gereksinimlerin artması, her türlü iletişim sürecinin bu ağlar üzerinden gerçekleştirilmesi yeni bir sosyalleşme alanı oluşturmuştur. Bugün insana dair pek çok unsur gerçek hayatın ötesinde internet ve sanal dünyada gerçekleşmektedir. Sosyal ağ ve dijital teknolojilerinin etkileşimli yapıları benzer dünya görüşüne sahip bireyleri sanal ortamlarda bir araya getirebilmektedir. Geleneksel dönemde sokak, ev, mahalle gibi ortamlarda bir araya gelen insanlar; bugün sosyal ağlarla kurulan sanal bir dünyada bir araya gelebilmektedir. Sanal cemaatlerin küresel bir iletişim aracı haline gelmesiyle birlikte; alışkanlıklar, düşünceler, duygular sanal bir dünyaya taşınmaktadır. Sanal bir dünyada inşa edilen bu cemaatler, anlaşılması gereken yeni ilişkiler ve çözülmesi gereken yeni sorunlar gündeme getirmektedir. Yaşanan bu gelişmeler toplumun bir üyesi olan kadınların da ilişkilerini, iletişimlerini, sosyalleşme süreçlerini, yaşam biçimlerini çevreyle olan etkileşimlerini etkilemektedir. Çoğu alanlarda; taciz, tecavüz ve şiddet olaylarında bir nesne olarak, ev içi alanlardaki rolleri vurgulanan kadınların sanal mecralarda nasıl yer aldıkları önemli bir konudur. Bu süreçte kadınlar da görüşlerini, eylemlerini ve eleştirilerini sosyal ağlar aracılığıyla ifade edebilirler. Bu çalışmada sosyal ağların, gündelik yaşamdaki yerinin hızla arttığı bir dönemde, bu yeni iletişim ortamlarının kadınlar için var olan toplumsallaşma süreçlerini nasıl etkilediği ve hangi farklılıklar meydana getirdiği ortaya konulmaya çalışılacaktır. İletişim teknolojileri ve bu teknolojilere ulaşımın artmasıyla sanal cemaatlerde kadınların nasıl toplumsallaşmış oldukları, kadınlar için belirtilen kimliklerin neler olduğu, hangi rollerin daha yaygın savunulduğu, toplumdaki kadın çizgisinde değişim olup olmadığı ve bu değişkenlerin sosyolojik nedenleri incelenecektir. Anahtar kelimeler: Toplumsal cinsiyet, İnternet, Sanal cemaatler, Kadın İmajı, İletişim Teknolojileri.
120
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Virtual Conmunities as a Means of Socialization and Reconstruction of Woman's İmage Ayşen KARATAŞ1,*, H.Eylem KAYA2 1
Süleyman Demirel Üniversitesi Sosyoloji Bölümü Yüksek Lisans Öğrencisi, Isparta, Türkiye 2 Süleyman Demirel Üniversitesi Sosyoloji Bölümü Öğretim Üyesi, Isparta, Türkiye *Responsible author e-mail:
[email protected]
Abstract The distinguishing feature of today's society in its integrated structure with technology is that all the produced information can be shared and changed. The effects of radical changes in the social area are manifested as changes taking place in economic, political, social and cultural spheres. Social networks, new communication tools, digital technology tools with the potential to appealto a wide range of people, and the involvement of individuals in the process are placed in the center of this changing process. Depending on the ongoing technological developments, increasing interest and necessity of social net works and having all kinds of communication processes through these networks has created a new field of socialization. Nowadays many elements of human being sarerealized on the internet and virtual world beyond the real life. The interactive structures of social networks and digital technologies can bring individuals with similar worldviews together in virtual environments. People coming together in the streets, houses, neighborhoods in the traditional era can come together in a virtual world established with social net works today. Habits, thoughts, and emotions are carried to a virtual world with virtual communities becoming a global means of communication. These communities, which are built in a virtual world, bring new relationships that need to be understood and new problems to be solved to the agenda. These changes affect the relationships of women as the members of society, their communication, socialization processes, interaction with their environment and their lifestyles. It is a significant issue how women place themselves in the virtual circles in contrast to the emphasis on women’s roles in domestic sphereas objects in harassment, rape and violence.Women might also express their views, actions and criticisms through social net works in this process. In this study, it will be tried to show how these new communication environments affect the socialization processes that exist for women and which differences have occurred at a time when social networks are rapidly increasing in daily life. How women have been socialized in virtual communities with the development and increasing access of communication technologies, what identities determined for women, what roles are more commonly advocated, whether there has been a change in the women idea of the society, and sociological reasons for these variables will be examined. Key words: Gender, Internet, Virtual Communities, Female İmage, Communication Technologies.
121
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürdürülebilir Kültür Turizmi Olarak “Gül Hasatı” Kırsal Faaliyetinin İncelenmesi Ayten Begüm AKÖZ1,*, Şefika Gülin BEYHAN2 1 2
Süleyman Demirel Üniversitesi Mimarlık Fakültesi, Isparta, Türkiye Süleyman Demirel Üniversitesi Mimarlık Fakültesi, Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected]
Özet Kişinin yaşadığı yerden başka bir yere gitmesi turizm olarak adlandırılmış, zaman içinde kişilerin farklı istek ve ihtiyaçları doğrultusunda farklı turizm türleri oluşmuştur. Bu turizm türlerinden biri olan kültür turizmi, her yörenin kendine özgü sahip olduğu çekiciliğin, ait olduğu kültürde anlam bulması ve zamanla insanların bu kültürler hakkında bilgi edinmek istemesiyle ortaya çıkmıştır. Sürdürülebilir kültür turizmi ise bütüncül yaklaşımı, planlamayı, kültürel mirası korurken sürdürülebilir kalkınma ve gelişmeyi hedeflemektedir. Bildiri kapsamında geçmişten günümüze Isparta tarihine, ekonomisine, kültürüne ait bir kırsal faaliyet olan ancak son yıllarda turizm olgusu içerisinde de yer almaya başlayan gül hasatı ele alınmaktadır. Yağ gülünün yalnızca göller bölgesinde yetişiyor olması bu bölgeyi diğerlerinden ayrıcalıklı kılmış ve bu bölgede en çok gül üretimine sahip olan Isparta ilinin ‘Gül Kenti’ olarak anılmasını sağlamıştır. Isparta’da birçok ilçede gül tarımı yapılmakta olup, bu ilçelerden Gönen ilçesine bağlı Güneykent kasabası güle verdiği önemle ön plana çıkmıştır. Yerel yönetimin gül yetiştiriciliğine verdiği önemle birlikte bölgede gül festivalleri düzenlenmiş, gül hasatının yapıldığı Mayıs ve Haziran aylarında her yıl binlerce yerli ve yabancı turist bu bölgeyi ziyaret etmiştir. 2011 yılında 4 Japon ve 2 Amerikalı turistle başlayan bu turizm türüne her geçen gün ilgi artmıştır. Bildiride Güneykent kasabasında gül hasatı faaliyeti etraflıca incelenmiş, gül yetiştiriciliğinin yoğun olarak yapıldığı Güneykent kasabasına gelen turistlere sürdürülebilir kültür turizmi kapsamında gül bahçeleri ve gül ile ilişkili mekanların bir rota dahilinde gezdirilerek farklı mekânsal deneyimler yaşatılması hedeflenmiştir. Şu anda da yapılan bu faaliyetin daha organize ve kapsamlı bir rota dahilinde gerçekleştirilmesi bildirinin hedefleri arasındadır. Bildiride yöntem olarak haritalama, fotoğraflama, yerinde gözlem ve tespitler kullanılmıştır. Bildirinin önemli sonuçları mevcuttur. Gül hasatı bir kırsal faaliyet olmakla birlikte sürdürülebilir kültür turizmi içerisinde mekânsal, kültürel olarak daha da geliştirilirse sürdürülebilir kalkınma bağlamında yöre insanına sosyal, ekonomik ve kültürel faydalar sağlayacaktır. Anahtar kelimeler: Sürdürülebilir Kültür Turizmi, Gül Hasatı, Sürdürülebilir Gelişme, Güneykent, Isparta.
122
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Investigation of "Rose Harvest" Rural Activity as a Sustainable Culture Tourism Ayten Begüm AKÖZ1,*, Şefika Gülin BEYHAN2 Süleyman Demirel Üniversitesi Mimarlık Fakültesi, Isparta, Türkiye Suleyman Demirel University Faculty of Architecture, Isparta, Türkiye *Responsible author e-mail:
[email protected]
1 2
Abstract Other places to go from the place where the person lived is called tourism, and different types of tourism have been formed over time according to the different demands and needs of the people. Cultural tourism, one of these tourism types, has emerged with the charm that each area has its own unique character, its meaning in the culture it belongs to, and the desire of people to learn about these cultures over time. Sustainable cultural tourism aims at holistic approach, planning, sustainable development and development while preserving cultural heritage. In the scope of the declaration, the day-to-day Isparta history, the economy, is a cultural activity belonging to the cult, but the rose harvest which is beginning to take place in tourism in recent years. The fact that the grease grows only in the lakes district has made this region a privileged place among others and it has been called the 'Rose City' of Isparta, which has the most rose production in this region. Rose cultivation is being carried out in many districts in Isparta and the town of Guneykent, which is connected to the district of Gönen, has been laid in the forefront with the importance given to it. Regional festivals have been organized with the importance given to rose cultivation by the local government and thousands of local and foreign tourists have visited this region in May and June each year when the rose harvest was made. With the arrival of 4 Japanese and 2 American tourists in 2011, interest in tourism has increased day by day. In the declaration, the roses harvesting activity in the town of Güneykent was examined extensively and it was aimed that tourists visiting to the town of Güneykent where the rose cultivation was intensively carried out, within the scope of sustainable culture tourism, traveled the rose gardens and roses related places in a route to experience different spatial experiences. It is also the goal of the declaration that this activity is to be carried out in a more organized and comprehensive route. Mapping, photography, on-site observation and fixation were used as methods in the declaration. The report has significant consequences. Gul Harvest will provide social, economic and cultural benefits to the local people in the context of sustainable development if it is developed locally and culturally in sustainable culture tourism with a rural activity. Key words: Sustainable Culture Tourism, Rose Harvest, Sustainable Development, Güneykent, Isparta.
123
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Pamukkale/Karahayıt Bölgesinin Sürdürülebilir Turizm Potansiyelinin Kentsel Kimliğe Etkileri Ayten Begüm AKÖZ1,*, Şefika Gülin BEYHAN2 1 2
Süleyman Demirel Üniversitesi Mimarlık Fakültesi, Isparta, Türkiye Süleyman Demirel Üniversitesi Mimarlık Fakültesi, Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected]
Özet Sürdürülebilir turizmde temel amaç; doğal ve kültürel değerlerimizin olduğu çevreleri korumak, bu değerleri tanıtmak, turizmin gerçekleştiği bu bölgelerde on iki ay boyunca turizm faaliyetlerinin yapılmasını sağlayarak turizmi çeşitlendirmek ve bölge ekonomisine katkıda bulunmaktır. Turizmin sürdürülebilirliği açısından kültürün sürekliliği bağlamında kültürel varlıkları hem yaşatma ve koruma hem de geliştirme açısından bazı ilkeler benimsenmelidir. Bir ülkenin kültürel varlıklarının korunması ve turizme dahil edilmesi sürdürülebilir turizm açısından uygulanabilirliği artıran ve destekleyen bir olgudur. Bu kapsamda her yıl binlerce yerli ve yabancı turist çeşitli turizm aktivitelerinin yer aldığı bölgeleri ziyaret etmektedir. Bu bölgelerden biri de sahip olduğu doğal güzellikleri, termal su kaynakları, tarihi ve kültürel dokusu ile tanınmış, UNESCO’nun dünya mirası listesine aldığı Pamukkale’dir. Diğeri ise kırmızı suyun tedavi edici özelliklerinden yararlanmak amacıyla bölgede çok sayıda turizm tesisi kurulmuş olduğu, Türkiye’den ve dünyadan şifa bulmak amacıyla gelen pek çok turiste ev sahipliği yapan Karahayıt’tır. Bildiride Pamukkale/Karahayıt Bölgesinin sürdürülebilir turizm potansiyelinin incelenmesi, sürdürülebilir turizm öğelerinin ve potansiyelinin kent kimliğini oluşturmadaki etkisi ve durumu araştırılmıştır. Bildirinin materyalini Pamukkale/Karahayıt Bölgesinin sürdürülebilir turizmi içerisinde yer alan tüm bileşenleri oluştururken, yöntem olarak da doğal çevre ve yapay çevre açılımında çevresel kimlik ve toplumsal kimlik öğelerinden oluşan kentsel kimlik şeması kullanılmış ve Pamukkale/Karahayıt bölgesi bu şema kapsamında analiz edilmiştir. Tarihi, kültürel ve doğal değerlere sahip bir turizm bölgesinin kimliğinin sürdürülebilir turizmi içerisinde bileşenlerle nasıl oluştuğu, etkilenme düzeyi ve sürdürülebilir gelişme ve planlama esası içerisinde nasıl değişebileceği ve gelecek nesillere aktarılacağı elde edilen sonuçlardandır. Anahtar kelimeler: Sürdürülebilir Turizm, Pamukkale, Karahayıt, Kentsel Kimlik, Kültür Mirası.
124
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Effects of Sustainable Tourism Potential of Pamukkale / Karahayıt Region on Urban Identity Ayten Begüm AKÖZ1,*, Şefika Gülin BEYHAN2 Suleyman Demirel University Faculty of Architecture, Isparta, Türkiye Suleyman Demirel University Faculty of Architecture, Isparta, Türkiye *Responsible author e-mail:
[email protected]
1 2
Abstract The main objective in sustainable tourism is; To protect the areas where our natural and cultural values are, to promote these values, to diversify tourism by providing tourism activities for twelve months in these regions where tourism is realized, and to contribute to the regional economy. In terms of tourism sustainability, some principles should be adopted in terms of survival, conservation and development of cultural assets in the context of cultural continuity. The protection of cultural assets of an country and the inclusion of tourism is a phenomenon that enhances and supports the viability in terms of sustainable tourism. In this context, thousands of local and foreign tourists visit the regions where various tourism activities take place every year. One of these is Pamukkale, which is known for its natural beauties, thermal water resources, historical and cultural heritage, and UNESCO's list of world heritage. The other is Karahayıt, which has a large number of tourism facilities established in the region to benefit from the therapeutic properties of red water and hosts many tourists from Turkey and from around the world for the purpose of healing. The report examines the sustainable tourism potential of Pamukkale / Karahayit region, the effect and the situation of sustainable tourism items and potential in forming urban identity. While all the components of the report are included in the sustainable tourism of Pamukkale / Karahayit region, the urban identity scheme consisting of environmental identity and social identity elements is used as a method in natural environment and artificial environment opening and Pamukkale / Karahayıt region is analyzed within this scheme. How the identity of a tourism zone with historical, cultural and natural values is formed with sustainable tourism, how it is affected and how it can be changed within the sustainable development and planning bases, and the results that can be transferred to future generations. Key words: Sustainable Tourism, Pamukkale, Karahayıt, Urban Identity, Cultural Heritage.
125
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Yavaş Kent Olma Yolunda Eğirdir Çiğdem AKMAN1,*, Azize ÖZYİĞİT2 1
Yrd. Doç. Dr., Süleyman Demirel Üniversitesi, İktisadi ve İdari Bilimler Fakültesi, Siyaset Bilimi ve Kamu Yönetimi Bölümü, Isparta, Türkiye 2 Doktora Öğrencisi, Süleyman Demirel Üniversitesi, Sosyal Bilimler Enstitüsü, Siyaset Bilimi ve Kamu Yönetimi Anabilim Dalı, Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected]
Özet İtalya’nın Orvieto kentinde 15 Ekim 1999 yılında kurulan Uluslararası Yavaş Kent Birliği (Cittaslow) nüfusu elli bini aşmayan kentlerde esnek mikroekonomiyi yaratmak, birlik üzerinden iyi yerel uygulamaların değişimini sağlamak, kent merkezi ve çevresinde vatandaşlık bilincini geliştirerek kültürel, çevresel, sosyal ve ekonomik gelişmeyi sağlamayı amaçlamaktadır. 2009 yılında Türkiye’den Seferihisar küreselleşmenin kentleri aynılaştırmasına ve özelliklerini yok etmesine karşı çıkan birliğin belirlediği kriterlerleri yerine getirerek ilk Cittaslow olan kent olmuştur. Yavaş kent hareketi tüm dünyada olduğu gibi Türkiye’de de hızla bilinmeye ve buna paralel olarak artmaya devam etmiştir. Isparta’nın doğal ve tarihi dokusu ile ön plana çıkan ilçesi Eğirdir de yavaş kent hareketine 2017 yılında dahil olmuştur. Bu çalışmada, Eğirdir’in yavaş kent hareketine katılmasından sonra kentte ne gibi gelişmelerin yaşandığı ortaya konulmak istenmektedir. Bu kapsamda Eğirdir Belediyesi yöneticileri ile görüşülerek yavaş kent olma kriterlerine (çevre politikaları, altyapı politikaları, kentsel yaşam kalitesi politikaları, tarımsal, turistik, esnaf ve sanatkârlara dair politikalar, misafirperverlik, farkındalık ve eğitim için planlar, sosyal uyum ve ortaklıklar) ilişkin sorular sorularak nitel bir analiz gerçekleştirilecektir. Anahtar kelimeler: Yavaş Kent, Yavaş Yemek, Eğirdir.
126
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Eğirdir on the Way to Be Slow City Çiğdem AKMAN1,*, Azize ÖZYİĞİT2 Asst. Assoc. Dr., Süleyman Demirel University, Faculty of Economics and Administrative Sciences, Department of Political Science and Public Administration, Isparta, Türkiye 2 PhD student, Süleyman Demirel University, Faculty of Economics and Administrative Sciences, Department of Political Science and Public Administration, Isparta, Türkiye * Responsible author e-mail:
[email protected]
1
Abstract The International Slow City Association (Cittaslow) established in 15 October 1999 in Orvieto, Italy, aims to create flexible microeconomics in cities with a population not exceeding fifty thousand, provide good local practice through unity, enhancing cultural, environmental, social and economic development by developing citizenship awareness in and around the city center. In 2009, Seferihisar from Turkey became the first Cittaslow city to fulfill the criteria determined by the union that opposes the globalization of cities and their destruction. The slow urban movement has been continuing to increase rapidly in Turkey as well as in the world as it is in the whole world. The town of Eğirdir which is in the forefront by Isparta's natural and historic texture, was included in the slow city movement in 2017. In this study, it is aimed to reveal what kind of developments have been experienced in the city after the participation of Egirdir in the slow urban movement. In this context, it is discussed with the Municipality of Eğirdir administrators that the criteria of being a slow city (environmental policies, infrastructure policies, urban quality of life policies, agricultural, tourist, artisans and craftsmen Policies, hospitality, awareness and plans for education, social cohesion and partnerships) will be asked for a qualitative analysis. Key words: Slow City, Slow Meal, Egirdir.
127
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürdürülebilir Kalkınma Açısından Sera Gazı Emisyonu Çiğdem AKMAN1,*, Azize ÖZYİĞİT2 1
Yrd. Doç. Dr., Süleyman Demirel Üniversitesi, İktisadi ve İdari Bilimler Fakültesi, Siyaset Bilimi ve Kamu Yönetimi Bölümü, Isparta, Türkiye 2 Doktora Öğrencisi, Süleyman Demirel Üniversitesi, Sosyal Bilimler Enstitüsü, Siyaset Bilimi ve Kamu Yönetimi Anabilim Dalı, Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected]
Özet Günümüzde hızla artmakta olan nüfusun, kentleşmenin, sanayinin çevresel sorunları da beraberinde getirdiği bilinmektedir. Yüksek oranlarda karbon içeren fosil yakıtlardan olan petrol, doğal gaz, kömür gibi enerjilerin insan faaliyetlerini gerçekleştirmek için; evlerde, işyerlerinde, fabrikalarda, taşıtlarda ve üretim aşamasında gerekli görülen diğer alanlarda kullanılması ile atmosfere salınan karbondioksitin çevre ve insan sağlığı üzerinde ciddi sorunlara neden olacağı herkes tarafından bilinmektedir. Bu durumun, küresel ölçekte şu andaki ve gelecekteki herkesi ilgilendireceği için gerekli görülen önlemlerin alınması ve hassasiyetin gösterilmesi şarttır. Bu sorunların ciddi boyutlara ulaşmasını önlemek amacıyla gerek ulusal gerekse de uluslararası yaptırımlar söz konusu olmaktadır. Birleşmiş Milletler İklim Değişikliği Çerçeve Sözleşmesi, Kyoto Protokolü, Paris Anlaşması bu kapsamda değerlendirilmektir. Küresel ölçekte sera gazı emisyonunun azaltılması için uygulamaya konulan karbon vergileri sürdürülebilir kalkınmayı gerçekleştirmede alınan önlemler arasında yer almaktadır. Kamusal mal olarak kabul edilen çevrenin, sürdürülebilir kalkınma açısından önem arz ettiği bilinmektedir. Sürdürülebilir kalkınmanın sağlanabilmesinde sera gazı salınımının belli kriterlere uyulması ile Türkiye’de ve özellikle de dünyada salınan sera gazı emisyonu birimi başına ödenen karbon vergilerinin sürdürülebilir kalkınma üzerinde gerçekleşen etkileri dikkat çekmektedir. İnsan ve doğa arasındaki dengeyi sağlayarak, var olan kaynakların bilinçli tüketilmesi ile bugünkü ve gelecekteki nesillerin ihtiyaçlarını gidermede sürekliliğin sağlanabilmesi için kalkınmanın planlanması her daim göz önünde tutulmalıdır. Doğal çevreyi korumak sadece ekosistemin kalkınmasını değil, ekonomik ve sosyal kalkınmayı da beraberinde getirecektir. Çalışmanın kapsamını; sürdürülebilirliğin ve sürdürülebilir kalkınmanın ne olduğu, küreselleşme ile sanayileşmenin artması sonucunda ortaya çıkan sera gazı emisyonu ve bu durumun sonucunda ortaya çıkan iklim değişikliği oluşturmaktadır. Bunun paralelinde çalışmada amaçlanan; sürdürülebilir kalkınmayı sağlayabilmek için, sera gazı emisyonunu azaltmada uygulanan karbon vergisinin ne ölçüde çözüm odaklı olduğunu araştırmaktır. Çalışmada; uluslararası anlaşmalardan, kanun ve yönetmeliklerden, istatistiki verilerden faydalanılarak literatür taraması yapılacaktır. Anahtar kelimeler: Sürdürülebilir Kalkınma, Sera Gazı Emisyonu, Karbon Vergisi.
128
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Greenhouse Gas Emissions for Sustainable Development Çiğdem AKMAN1,*, Azize ÖZYİĞİT2 1
Asst. Assoc. Dr., Süleyman Demirel University, Faculty of Economics and Administrative Sciences, Department of Political Science and Public Administration, Isparta, Türkiye 2 PhD student, Süleyman Demirel University, Faculty of Economics and Administrative Sciences, Department of Political Science and Public Administration, Isparta, Türkiye * Responsible author e-mail:
[email protected]
Abstract It is known that the rapidly increasing population, urbanization, and the industry are bringing environmental problems together. In order to realize the human activities of the energies such as petroleum, natural gas, coal which are in high proportions from fossil fuels containing carbon; Carbon dioxide released into the atmosphere through home use, at workplaces, in factories, on vehicles and in other fields as deemed necessary in the production process, is known to cause serious problems on the environment and human health. It is imperative to take precautions and take precautions as it is necessary for every present and future person to be interested in the global scale. Both national and international sanctions are in place to prevent these problems from reaching serious dimensions. The United Nations Framework Convention on Climate Change, the Kyoto Protocol, the Paris Treaty are seen among these sanctions. Carbon taxes applied to reduce greenhouse gas emissions on a global scale are among the measures taken to achieve sustainable development. It is known that the environment, which is accepted as public goods, is important in terms of sustainable development. The observance of certain criteria for greenhouse gas emission in achieving sustainable development, and the effects on the sustainable development of carbon taxes paid per unit of greenhouse gas emissions in Turkey and especially around the world are remarkable. Every plan must be considered in order to achieve a balance between man and nature, the conscious consumption of existing resources, and the continuity of continuing the needs of present and future generations. Protecting the natural environment will bring not only ecosystem development but also economic and social development Scope of work; what is sustainability and sustainable development, greenhouse gas emissions as a result of globalization and industrialization increase, and climate change as a result of this situation. In parallel with this aim, Is to investigate the extent to which the carbon taxation applied to reduce greenhouse gas emissions is solution-oriented in order to achieve sustainable development. International agreements, laws and regulations, statistical data will be used at the study to search the literature. Key words: Sustainable Development, Greenhouse Gas Emissions, Carbon Tax.
129
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Biyoplastikler ve Çevresel Etkileri Hakkı GÜLŞEN1,*, Bahar AKİN2 Harran üniversitesi,Mühendislik Fakültesi, Çevre mühendisliği, Şanlıurfa, Türkiye Harran üniversitesi,Mühendislik Fakültesi, Çevre mühendisliği, Şanlıurfa, Türkiye *Sorumlu yazar e-posta:
[email protected]
1 2
Özet Biyoplastikler; bitkisel katı ve sıvı yağlar, bitki nişastaları, veya mikroorganizmalar gibi yenilenebilir biyolojik kaynaklardan elde edilen plastiklerdir. Günümüzde yaygın olarak bilinen ve kullanılan plastikler petrol ve kömür gibi fosil yakıtlardan elde edilirler. Son yıllarda artan çevresel kaygılar ve baskılar petro-kimyasal hammaddelere olan bağımsızlığın artırılması gibi amaçlar endüstride yenilenebilir hammadelere yönelimi artırmıştır. Dünya genelinde 325 milyon ton fosil kaynaklı plastik üretilirken, 5 milyon tonunu biyo bazlı plastikler oluşturur. Ülkemizde henüz yerli üreticiler tarafından bu ham maddelerin üretimi yapılmadığından yılda yaklaşık olarak 250-300 ton civarında biyoplastik hammaddesi ithalatı yapıIdığı tespit edilmiştir. Türkiye’de yaklaşık 50 milyon ton/yıl civarında toplam palstik hammadde talebini ve bunun içerisindeki 1.5 milyonluk plastik ambalaj ürettiğimiz dikate alındığında, mevcut biyoplastik hammedde arzı henüz ülkemizdeki talepleri karşılayamacak seviyededir. Son 5 yılda ciddi bir artış yakalayan dünya biyoplastik üretiminin 2020 yılına kadar miktar bazında 15 milyon ton ve değer bazında 30,8 milyar dolara ulaşması tahmin edilmektedir. Petrolden elde edilen plastiklerle karşılaştırıldığında biyoplastiklerin özellikle insan ve çevre sağlığı açısından önemli üstünlükleri vardır. Biyoplastikler yenilenebilir kaynaklardan elde edilebilir. Hem yüksek sera gazı etkisi yaratan, hem de doğal kaynakları tüketen petrol türevi plastiklerin aksine, sürdürebilir malzemelerdir. Biyoplastikler çoğunlukla biyobozunur özelliğe sahiptir. Yüzlerce hatta binlerce yıl bozulmadan doğada barınan ve zehirli maddeler içerebilen petrol bazlı plastik maddelerin aksine, biyoplastik maddeler kullanım ömürlerini tamamladıktan sonra doğaya karışarak çevre kirliliğini önler ve geride doğaya zararlı, zehirli maddeler bırakmazlar. Biyoplastikler çevre ve insan sağlığı açısından daha güvenlidir. Biyolojik plastikler düşük erime sıcaklıkları nedeniyle üretim aşamasında da daha az enerji sarfetmektedir. 1 ocak 2018 yılından 1 ocak 2019 yılına ertelenen plastik poşet yasağı uygulamasının kapsamında belediyelerce kontrol edilen pazar yerlerinin bu yönetmelikte kapsam dışında olması bu uygulamanın tam uygulanamayacağının bir kanıtıdır. Petrol bazlı plastikler doğada 1000 yıl, alüminyum 100 yıl, kutu kola 10 yıl ciklet bile 2 yılda çözünmeden kalabilirken biyoplastik bazlı poşetler 1 ile 6 ay içerisinde doğaya karışıp kompostlanabilir. Bundan dolayı daha etkileyici bir çözüm olduğu düşünülen biyoplastik bazlı poşetlerle çevresel kaygılar tamamen azaltılmış olacaktır. Zamanla tüm plastik ambalajlarda kullanılarak istenilen yenilenebilir hammadelere yönelim sağlanmış olunur. Anahtar kelimeler: Biyoplastik, Plastik, Biyobozunur.
130
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Bioplastics and Environmental Effects Hakkı GÜLŞEN1,*, Bahar AKİN2 Harran Üniversitesi, Mühendislik Fakültesi, Çevre mühendisliği, Şanlıurfa, Türkiye Harran Üniversitesi, Mühendislik Fakültesi, Çevre mühendisliği, Şanlıurfa, Türkiye *Responsible author e-mail:
[email protected]
1 2
Abstract Bioplastics; Vegetable fats and oils, plant starches, or microorganisms. Plastics commonly used and widely used today are derived from fossil fuels such as petroleum and coal. Increasing environmental concerns and pressures, increasing the independence of petro-chemical raw materials, etc. have increased the direction of renewable raw materials in the industry. Worldwide, 325 million tons of fossil-based plastics are produced, while 5 million tons are bio-based plastics. Since these raw materials have not yet been produced by domestic producers in our country, it has been determined that they import about 250300 tons of bioplastic raw materials per year. When the demand for total palstic raw material in Turkey is about 50 million tons / year and we produce 1.5 million plastic packaging in it, the current bioplastic raw material supply is not enough to meet the demand in our country. The world's bioplastic production, which has experienced a serious increase in the last 5 years, is expected to reach 15 million tons in volume and 30.8 billion dollars in value by 2020. Compared to petroleum-derived plastics, bioplastics have significant advantages, especially in terms of human and environmental health; Bioplastics are derived from renewable sources. Unlike petroleum derived plastics, which both create high greenhouse effect and consume natural resources, they are sustainable materials. Bioplastics are often biodegradable. Contrary to petroleum-based plastic materials which can be sheltered in nature and contain toxic substances for hundreds or even thousands of years, bioplastic materials prevent environmental pollution by mixing with the environment after completing their service life and leave no toxic substances harmful to nature. Bioplastics are safer in terms of environment and human health. Biological plastics also consume less energy during the production phase due to their lower melting temperatures. The fact that market places controlled by the municipalities within the scope of the plastic bags prohibited from January 1, 2018 to January 1, 2019 are out of scope of this regulation is proof that this application can not be implemented completely. Petroleumbased plastics can survive for 1000 years in nature, 100 years in aluminum, 10 years in gobbles and 2 years in gobies. Bioplastic-based bags can be mixed and composted in 1 to 6 months so that environmental concerns will be completely reduced with bioplasticbased bags considered to be a more impressive solution. All plastic packages are used to provide the desired renewable raw materials. Key words: Bioplastic , plastic , biodegradable.
131
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Yeni Ditiyenilpirol ve ProDOT Bazlı Kopolimerlerin Elektrokromik Özelliklerinin İncelenmesi Barış Emre Bingöl1,2, Burak Tekin2,3, Buket Bezgin Çarbaş1,2* Enerji Sistemleri Mühendisliği, Karamanoğlu Mehmetbey Üniversitesi, 70100 Karaman, TÜRKİYE İletken Polimerler ve Enerji Uygulamaları Laboratuvarı, Karamanoğlu Mehmetbey Üniversitesi, 70100 Karaman, TÜRKİYE * Sorumlu yazar e-posta:
[email protected] 1
2
Özet Bu çalışmada Ditiyenilpirol polimerinin ProDOT (3,4-propilendioksitiyofen) monomerinin elektrokromik özelliklerine etkisi araştırılmıştır. Bu iki bileşenin kopolimerleri, farklı monomer oranlarında elektroanalitik yöntemlerle elde edilmiştir. Tüm kopolimerlerin morfolojik, optiksel ve elektrokimyasal karakterizasyonları araştırılmıştır. Yeni filmlerin elektrokromik özellikleri döngülü voltametri ve amperometrik yöntemi ile araştırılmıştır. Elektrokromik filmlere uygulanan farklı potansiyeller ile rengindeki değişim gözlenmiştir. Çalışmada kopolimer filmlerin morfolojik ve kimyasal analizleri de yapılmıştır. Sonuç olarak, kopolimer filmin yapısındaki ProDOT konsantrasyonu arttığı zaman, yeni kopolimerin daha düşük geçiş sürecine (0,4 s) ve daha yüksek renklenme etkinlik değerine (256 cm 2/C) sahip oldukları görülmüştür. Bu sonuçlara bakılarak elde edilen kopolimerin elektrokromik malzemeler olarak görüntüleme ve opto-elektronik cihazlarda kullanılabileceğini göstermektedir. Anahtar kelimeler: Elektrokromik, Ditiyenilpirol, ProDOT, Elektrokimyasal polimerizasyon.
132
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
An Investigation on Electrochromic Properties of New Copolymers Based on Dithienylpyrrole and ProDOT Baris Emre Bingol1,2, Burak Tekin2,3, Buket Bezgin Carbas1,2* 1
Department of Energy Systems Engineering, Karamanoglu Mehmetbey University, 70100 Karaman, Turkey 2 Conductive Polymers and Energy Applications Laboratory, Karamanoglu Mehmetbey University, 70100 Karaman, Turkey 3 Department of Advanced Technologies, Karamanoglu Mehmetbey University, 70100 Karaman, Turkey * Sorumlu yazar e-posta:
[email protected],
[email protected],
[email protected]
Abstract In this study, the effect of the dithienylpyrrole polymer on the electrochromic properties of ProDOT (3,4-propylene dioxythiophene) monomer was investigated. Copolymers of these two components were obtained by electroanalytical methods at different monomer ratios. Morphological, optical and electrochemical characterizations of all copolymers were investigated. Electrochromic properties of new films were investigated by cyclic voltammetry and amperometric method. The change in color was observed with different potentials applied to electrochromic films. In the study, morphological and chemical analyzes of copolymer films were also carried out. As a result, new copolymer film was found to have a lower transition time and a higher coloration efficiency value, when the concentration of ProDOT in the copolymer film in structure is increased. These results show that the copolymer obtained can be used as electrochromic materials for imaging and opto-electronic devices. Key words: Electrochromic, Dithienylpyrrole, ProDOT, Electrochemical Polymerization.
133
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Atık Plastiklerin Biyo-Bozunum Çalışmaları Yalçın Aşkın ÖKTEM1,*, Başak Berna PALABIYIK 1, İstanbul Üniversitesi, Mühendislik Fakültesi, Çevre Mühendisliği Bölümü, İstanbul, Türkiye *Sorumlu yazar e-posta:
[email protected]
1
Özet Plastikler, 1900’lerin başında tesadüfen icat edilen ve günümüz modern hayatında oldukça büyük bir kullanım alanına sahip olan maddelerdir. Atık haline geldiğinde ise ciddi bir çevresel problem olarak karşımıza çıkmaktadır. Birçok plastik malzemesi olmasına karşın düşük yoğunluklu polietilen (LDPE), yüksek yoğunluklu polietilen (HDPE), PP, PVC, PS ve PE terefetalat (PET) toplam talebin %90’ınını karşılamaktadır. Yakın tarihlerde küresel plastik üretimi yıllık %6’lık bir artışla 265 milyon tona ulaşmıştır (2010 itibarı ile). Plastiklerin önemli bir grubunu termo plastikler ve diğer bir grubunu ise termosetler oluşturmaktadır. Sentetik plastiklerin deterjanlar, kimyasallar, kozmetikler, yiyecek, farmosötikler gibi maddelerin paketlenmesinde geniş bir kullanım alanı bulunmaktadır. Bunlar; PE (LDPE, HDPE, MDPE ve LLDPE), PP, PS PVC, PU, PET, polibütülen terefitalat, naylonlar gibi maddelerdir. Her yıl dünyamızda yaklaşık 140 milyon ton sentetik polimer üretilmektedir. Amerika Birleşik devletlerinde toplanan kentsel çöpün yaklaşık %20’si, Avusturalya da ise düzenli depolama alanına getirilen çöpün toplam ağırlığının %25’ini sentetik polimerler oluşturmaktadır. Üretilen atıklar içinde bulunan plastik grupları ne tamamen nihai bileşenlerine ayrılmakta, ne de doğru biçimde depolanabilmektedir. Artan bu kirlilik; klorlanmış plastiklerin topraklara bıraktığı kimyasallar ile yeraltısuyu kirliliğine, okyanus ve denizlerde ise plastik parçacıklar birincil üreticilerden üst sınıf canlılara kadar ekosistemin çeşitli düzeylerinde zararlara, plastiğin bir formu olan ve sakızlarda, oyuncaklarda, gözlüklerde, atılabilir şişelerde ve poşetlerde ise insanlara direkt zarar verebilmektedir. Yaşam döngüsü içinde civa, dikosin, fitalat gibi zehirli kimyasallar bırakan PVC, geri dönüşsüz yaşam boyu sağlık tehditleri oluşturabilir. Yakıldığında ya da üretimi sırasında serbest bırakılan dioksin yine kanser, immün ve üreme sistemlerinde zararlara yol açabilmektedir. Ekosisteme zarar vermeyen bertaraf süreçleri içinde en uygun olanı biyolojik bozunmadır. Mikroorganizmalar hem sentetik hem de doğal polimerlerin bozunumunda kullanılabilmektedir. Ancak plastiklerin bozunması oldukça yavaş bir süreçtir ve kontrol eden parametreler araştırmaya oldukça açıktır. Sıcaklık, pH gibi çevresel faktörler, bu tür materyalleri karbon ve enerji kaynağı olarak kullanan mikroorganizmalar için oldukça önemlidir. Bunlardan bakteri ve mantar, literatürde plastiklerin bozunmasında en yoğun çalışılan grupları oluşturmaktadır. Laboratuvar ya da farklı ölçekte konu ile ilgili yapılan çalışmalar incelenmiş ve karşılaştırılmalı olarak irdelenmiştir. Anahtar kelimeler: Atık plastikler, biyo-bozunum, mikroorganizma, bozunma ürünleri.
134
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Study of Biodegradation at Waste Plastics Yalçın Aşkın ÖKTEM1,*, Başak Berna PALABIYIK 1 İstanbul University Engineering Faculty, Environmental Engineering Dept., İstanbul, Türkiye * Responsible author e-mail:
[email protected]
1
Abstract Plastics are materials that have been invented by chance at the beginning of the 1900's and have a very large use in today's modern life. When it becomes waste, it becomes a serious environmental problem. Low density polyethylene (LDPE), high density polyethylene (HDPE), PP, PVC, PS and PE tapelets (PET) supply with 90% of total demand despite the fact that there are many plastic materials. In recent years global plastic production has increased by 6% year on year to 265 million tonnes (as of 2010). An important group of plastics is thermoplastics and the other group is thermosets. Synthetic plastics have a wide range of uses for packaging materials such as detergents, chemicals, cosmetics, food, pharmaceuticals. These; PE (LDPE, HDPE, MDPE and LLDPE), PP, PS PVC, PU, PET, polybutylene terephthalate, nylon and etc. Approximately, 140 million tons of synthetic polymer are produced each year in world . Synthetic polymers account for approximately 20% of the urban waste collected in the United States and 25% of the total weight of the garbage brought to the landfill site in Australia. The plastic groups contained in the produced wastes are neither completely degraded into final components nor stored correctly. This increased pollution; plastic particles in the oceans and seas can directly damage people at various levels of ecosystem damage from primary productivity to upper level creatures and in the form of plastic and in the form of gum, toys, glasses, disposable bottles, and bags in the case of chlorinated plastics. PVC, which releases poisonous chemicals such as mercury, dioxin, and phthalate in the life cycle, can cause irreversible lifetime health threats. Dioxin, which is liberated when it is burned or produced, can also cause damage to the cancer, immunological and reproductive systems. Biodegradation is the most appropriate disposal process that does not damage the ecosystem. Microorganisms can be used in the decomposition of both synthetic and natural polymers. However, the degradation of plastics is a very slow process and the controlling parameters are quite clear to investigate. Environmental factors such as temperature and pH are very important for microorganisms that use such materials as carbon and energy source. Bacteria and fungi constitute the most intensively studied groups in the literature for degradation of plastics. Studies conducted in the laboratory or at different scales were examined and compared in a comparative way. Key words: Waste plastics, bio-degradation, microorganism, products of degradation.
135
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Enerji Verimlilik Sınıflarına Uygun Cihazlar Kullanarak Enerji Tasarrufu Sağlanması Batuhan ÖZAKIN1,*, Mustafa PEHLİVAN2, Abdülvahap ÇAKMAK3 1,2,3
Ondokuz Mayıs Üniversitesi, Kavak Meslek Yüksekokulu, Samsun, Türkiye *Sorumlu yazar e-posta:
[email protected]
Özet Enerji verimliliği sınıflandırması, bir cihazın enerji tüketimi bazında A, B, C, D, E, F ve G harfleriyle ifade edilen yedi gruptan oluşmaktadır. A sınıfı cihazlar en az enerji tüketimine sahipken G sınıfı cihazlar en fazla enerji tüketimine sahip cihazlardır. Bu çalışma enerji verimlilik sınıflarına uygun cihazlar kullanarak enerji tasarrufu sağlanabileceğini somut bir şekilde göstermek amacıyla yapılmıştır. Bunun için piyasada satışı yapılan elektrikli cihazlar üzerinden hareket edilerek bu cihazların harcadıkları elektrik miktarları belirlenerek karşılaştırılmış ve bu cihazların enerji tasarruf miktarı belirlenmiştir. Enerji verimlilik sınıflarına uygun cihaz kullanarak enerjiden tasarruf edilebileceği sonucuna ulaşılmıştır. Anahtar kelimeler: Enerji verimlilik sınıfları, Enerji tasarrufu, Uygun cihaz kullanımı.
136
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Ensure of Energy Saving Using Appropriate Devices to Energy Efficiency Classes Batuhan ÖZAKIN1,*, Mustafa PEHLİVAN2, Abdülvahap ÇAKMAK3 1,2,3
Ondokuz Mayıs University, Kavak Vocational School, Samsun, Turkey *Responsible author e-mail:
[email protected]
Abstract The energy efficiency classification is made up of seven groups, represented by the letters A, B, C, D, E, F and G on the energy consumption of a device. While class A devices have the lowest energy consumption, class G devices have the highest energy consumption. This work was carried out to show in a perceptible way that can be ensured of energy saving using appropriate devices to energy efficiency classes. For this, the electric devices that are sold in the market are acted on and the amounts of electricity these devices spend are determined and compared and the energy saving amount of these devices has been determined. Using appropriate devices to energy efficiency classes are result is that energy can be saved. Key words: Energy efficiency classes, energy saving, appropriate device us.
137
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Bir Reaktif Tekstil Boyar Maddesinin Eucalyptus camaldulensis Temelli Aktif Karbon ile Sulu Fazdan Giderimi Behzat BALCI1,*, F. Elçin ERKURT2, E. Su TURAN3 1,2, 3
Çukurova Üniversitesi Mühendislik Mimarlık Fakültesi Çevre Mühendisliği Bölümü *Sorumlu yazar:
[email protected]
Özet Boyar madde içeren atıksular, oluşturacağı ekolojik problemlerden dolayı özel önem verilmesi gereken kirleticilerdendir. Dünya genelinde 10.000 tip farklı boya ve ortalama 700.000 ton miktarında boya kullanımı mevcuttur. Boyama işleminden sonra önemli miktarda boyar madde atıksulara ve alıcı ortama ulaşmaktadır. Boyar maddelerin sucul ortamlarda toksik, kanserojenik problemlere neden olduğu bilinmektedir. Reaktif boyar maddeler parlak yapıları hızlı uygulanabilirliği ve düşük maliyetinden dolayı tekstil endüstrisinde en yaygın kullanılan boyar madde tipidir. Geleneksel atıksu arıtım süreçleri sonunda bu boyar maddelerin giderimi genel olarak düşük kalmaktadır. Adsorpsiyon süreci fiziksel arıtım yöntemi olup boyar maddeler gibi geleneksel arıtıma dirençli maddeleri atıksulardan gidermede etkin bir yöntemdir. Yüksek yüzey alanı sağlamasından dolayı adsorpsiyon süreçlerinde en yaygın kullanılan adsorbent ise aktif karbondur. Ancak aktif karbon üretimi maliyeti yüksek bir süreçtir ve bu durum bu malzemenin kullanımına da sınır getirmektedir. Aktif karbon üretiminde yüksek maliyete neden olan en önemli etkenlerden biri, kömür gibi pahalı malzemelerin hammadde olarak kullanılmasıdır. Aktif karbon kullanımında mevcut olan bu sınırlamalardan dolayı, araştırmacılar bu malzemenin üretiminde düşük maliyetli ve sürdürülebilir temini olabilen hammadde arayışına yönelmişlerdir. Bu çalışmada, bir tekstil boyar maddesi olan RR189’in, Eucalyptus camaldulensis kabuklarından elde edilmiş olan ve NaOH ile aktive edilmiş aktif karbon (ECAK) ile, değişen parametreler altında adsorpsiyon ile sulu fazdan giderimi araştırılmıştır. Eucalyptus kabukları, yaygın ve büyük miktarlarda bulunması ve yenilenebilen bir karakterde olmasından dolayı düşük maliyetli hammadde olarak tercih edilmiştir. Ayrıca Eucalyptus ağacı, kağıt üretiminde çok tercih edilen bir ağaç olup, kağıt hamuru üretiminde ağaç kütüklerinin kabuklarını soyma işlemi neticesinde çok büyük miktarlarda Eucalyptus kabuğu elde edilmektedir. Bu durum aktif karbon üretiminde Eucalyptus camaldulensis kabuklarının düşük maliyetli ve sürdürülebilir bir hammadde kaynağı olabileceğini ortaya koymaktadır. Eucalyptus kabukları, Çukurova Üniversitesi Balcalı Kampüsündeki ağaçlardan toplanmıştır. kabuklar parçalanıp, karbonizasyon işlemi için kül fırınında 400°C’de, 3 saat süre ısıl işleme tabi tutulmuştur. 10 g karbonize edilmiş malzeme 4 N, 500 mL NaOH çözeltisinde, 80 °C’de sıvı faz tamamen buharlaşana kadar karıştırılmıştır. Kimyasal olarak aktive edilen karbon 600°C’de, 2 saat boyunca yeniden ısıl aktivasyona tabii tutulmuştur. Boyar madde Adana’da yerel bir tekstil firmasından temin edilmiştir. Sıvı fazdaki kalıntı boyar madde konsantrasyonunun tespiti, spektrefotometrede 534 nm dalga boyunda hazırlanmış olan kalibrasyon eğrisi üzerinden gerçekleştirilmiştir. RR189’un ECAK tarafından adsorpsiyonla giderilmesi süreci üzerine temas zamanının (590 dk.), pH’ın (3-9), çözelti sıcaklığının (10, - 40, °C), ve başlangıç RR189 konsantrasyonunun (75-250 mg/L) etkisi araştırılmıştır. Yapılan adsorpsiyon çalışması 138
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
kesikli süreç olup, 500 mL erlenmayerlerde ve 150 mL hacminde sulu çözeltide gerçekleştirilmiştir. Adsorpsiyon denge zamanı çalışması 250 mg/L boyar madde için pH 7’de, 20 °C’de ve 0,1 gram ECAK dozu ile gerçekleştirilmiştir. Yapılan çalışmada adsorpsiyon denge zamanının 50 dk. olduğu tespit edilmiştir. Denge zamanında hesaplanan adsorpsiyon kapasitesi 191,7 mg/g’dır. Yapılan çalışmalar ECAK’ın adsorpsiyon kapasitesinin, artan pH ile arttığını göstermiştir. Asidik koşullarda adsorpsiyon kapasitesinin, bazik koşullara göre önemli ölçüde düştüğü görülmüştür. Adsorpsiyon kapasitesi pH 3’de 73,2 mg/g bulunurken, pH 9’da 225,15 mg/g olarak bulunmuştur. Düşük pH değerlerindeki düşük adsorpsiyon kapasitesinin, H+ iyonlarının adsorbent yüzeyini işgal etmesi ve RR189 tutulumunu azaltmasından olabileceği düşünülmektedir. Tüm pH değerlerinde denge zamanının 50-60 dk civarı olduğu tespit edilmiştir. Sürecin termodinamiği üzerine yapılan araştırmalar, ECAK’ın adsorpsiyon kapasitesinin, sıcaklığın artmasıyla önemli derecede arttığını göstermiştir. Adsorpsiyon kapasitesi, 10°C ve 40 °C’de sırasıyla 170,1 mg/g ve 284,55 mg/g olarak hesaplanmıştır. Yüksek sıcaklıklarda yüksek adsorpsiyon kapasitesinin elde edilmesinin, sıcaklık artışıyla RR189 moleküllerinin mobilitesinin ve ECAK aktif sitlerinin artmasına dayalı olabileceği düşünülmektedir. Boyar madde konsantrasyonu adsorpsiyon süreçlerinde sürece etki eden önemli parametrelerden biridir. Deneysel çalışmalar, adsorpsiyon kapasitesinin, RR189 konsantrasyonunun artmasıyla arttığını ve RR189 konsantrasyonunun azalmasıyla azaldığını göstermiştir. Adsorpsiyon kapasiteleri 75 ve 250 mg/L boyar madde konsantrasyonları için sırasıyla; 105,34 ve 284,55 mg/g bulunmuştur. Eucalyptus camaldulensis kabuklarından elde edilen aktif karbon ile sulu fazdan adsorpsiyonla RR189 giderimi adsorpsiyon süreci üzerine yapılan çalışmalar sonucu, süreç üzerine pH’ın, sıcaklığın ve başlangıç RR189 konsantrasyonunun önemli derecede etki ettiği görülmüştür. Adsorpsiyon süreci için optimum sıcaklığın ve pH’ın sırasıyla 40°C ve 9 olduğu tespit edilmiştir. 250 mg/L RR189 için adsorpsiyon kapasitesi pH 9’da, 40 °C’de ve 0,1 gram ECAK dozu ile 284,55 mg/g olarak bulunmuştur. Çalışmadan elde edilen sonuçlar Eucalyptus camaldulensis kabuklarının aktif karbon üretiminde düşük maliyetli ve sürdürülebilir bir kaynak olduğunu ve kabuklardan üretilen aktif karbon ile RR189 boyar maddesinin etkili bir şekilde giderebildiğini göstermiştir. Anahtar kelimeler: Eucalyptus camaldulensis, Reaktif Red 189, Adsorpsiyon.
139
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Adsorption of a Reactive Textile Dye by Eucalyptus camaldulensis Barks Based Activated Carbon Behzat BALCI1*, F. Elçin ERKURT2, E. Su TURAN3 1,2, 3
Çukurova Üniversitesi Mühendislik Mimarlık Fakültesi Çevre Mühendisliği Bölümü *Responsible author e-mail:
[email protected]
Abstract Colored wastewaters may cause of serious ecological problems. Dye producing capacity of industries is very large. These are about 10000 different dyes and their weight is approximately 0.7 million tons. During the dyeing processes large amount of these dyes are discharged by effluents to receiving environment. Their carcinogenic and toxic effect to certain form of aquatic life is well known. Reactive dyes are the most widely used dyes in the textile industry due to their bright colors, colorfastness, simple and low cost application processes. Reactive dyes are soluble in water and not easily biodegradable due to their azoic structure and thus the reactive dyes may still remain in the effluent even after extensive conventional wastewater treatment processes. Adsorption systems have gained prominence as treatment processes which ensure good quality effluents that are low in concentrations of dissolved organic compounds, such as dyes. Activated carbon is one of the most popular and widely-used adsorbent due to the high surface area. On the other hand, application of commercially activated carbons remains limited due the high cost resulting from the production of activated carbon from expensive materials, such as coal. On account of this, researchers have focused on producing low –cost and effective activated carbons. The main objective of this work is to evaluate the adsorption potential of an activated carbon produced form Eucalyptus camaldulensis barks (ECAC) for a textile dye Reactive Red 189 (RR189). The Eucalyptus camalduensis barks were selected as an activated carbon precursor due to their renewable character, wide availability and easy collection. Eucalyptus is known worldwide as a source of fiber for the pulp and paper industry. Moreover, the abundant amounts of barks are produced during the debarking process. Therefore Eucalyptus barks possess a low cost and sustainable source for production of activated carbon. Eucalyptus camalduensis barks were collected from the campus of Cukurova. The barks were washed with water to remove impurities and dried at 60°C for 48 hours. Then the material was carbonized at 400°C for three hours with 15°C/min heating rate. NaOH was used for the chemical activation of carbonized barks. 4 N NaOH (500 mL) was used for impregnation of 10 g carbonized barks at 80°C until the liquid phase evaporated. Chemically activated material was washed with distilled water and thermally reactivated at 600°C for two hours. ECAC was cooled at room temperature, crushed and sieved to desired particle sizes. The azoic structure dye RR189 was obtained from a local textile industry in Turkey. RR189 concentration of supernatant was estimated by measuring absorbance at maximum wavelength (534 nm) and computing concentration from the calibration curve. The adsorption of RR189 by ECAC were performed under batch experiments conditions. 500 mL erlenmeyer flasks were used each containing 150 mL RB29 solution with different concentrations and with a constant ECAC weight (0.1 g). The flasks were stirred at 250 rpm in a temperature–controlled orbital shaker. Effect of pH (3 - 9), temperature (10-40°C), and initial RR189 concentration (75- 250 mg/L) on adsorption were studied. . 50 minutes is necessary to reach equilibrium for RR189 adsorption onto ECAC. 140
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The equilibrium time adsorption capacity (qe) of ECAC was found 191.7 mg/g. Equilibrium time was selected 50 min. for further experiments. The adsorption capacity of ECAC increased with increasing pH. While the adsorption capacity of ECAC for pH 3 were found to be 73.2 mg/g, it was found 225.15 mg/g for pH 9. At acidic pH values H+ may occupy the adsorption sites of ECAC. The low adsorption capacities at low pH values may occur due to the competitive adsorption between H+ ions and RR1189 molecules. The adsorption capacity of ECAC significantly increased with increasing temperature, which indicates that the adsorption of RR189 onto ECAC was an endothermic process. The adsorption capacities of ECAC for 10°C and 40 °C were found to be 170.1 and 284.55 mg/g, respectively. Higher adsorption capacities at higher temperatures may be due to the increasing mobility of dye molecules. Also, the number of active sites of ECAC may increase with increasing temperature. It was determined that the adsorption capacity of ECAC significantly increased with increasing initial concentration and RB29 removal efficiencies increased with decreasing initial RB29 concentration. When the initial RR189 concentration increased from 75 mg/L to 250 mg/L the adsorption capacity of ECAC increased from 105.34 to 284.55 mg/g. The experiments showed that pH, temperature and dye concentration had a significant effect on adsorption process. The optimum pH and temperature for adsorption were found to be 9 and 40 °C, respectively. The adsorption capacity for 250 mg/L dye concentration at pH 9 and 40°C was found to be 284.55 mg/g. The experiments showed that ECAC is an effective adsorbent for removal of reactive dye from aqueous solution. Eucalyptus camaldulensis barks possess a potential low-cost and sustainable source for production activated carbon. Key words: Eucalyptus camaldulensis, Reactive Red 189, Adsorption.
141
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Temel Gıdamız Buğdayın, Geçmişten Geleceğe Yolculuğu Bekir ATAR1,* 1
Süleyman Demirel Üniversitesi, Ziraat Fakültesi, Eğitim Araştırma Ve Uygulama Çiftliği, Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected]
Özet Türkiye'nin güneydoğusunu da içine alan, Bereketli Hilal olarak adlandırılan bölgede arpa, bezelye, mercimek, nohut, keten, acı fiğ ile birlikte evcilleştirildiğinden bu yana buğday insanların başlıca gıda kaynağı olmuştur. Ülkemizde ve dünyanın birçok yerinde ekmek yiyecekle aynı anlamda kullanılmaktadır. İnsanın buğdayla ilişkisi avcıtoplayıcı dönemde başlamıştır. Yerleşik düzene geçişle birlikte (M.Ö. 8500) yiyecek kaynakları bulmak gerekiyordu. Buğday ve arpa en uygun bitkisel kaynak olarak öne çıkmıştır. Son yıllarda bazı bilim insanları batı medeniyetin temelinin Yunan Medeniyeti değil Sümer Medeniyeti olduğunu belirtmektedir. Verimli Hilal'de yükselen Sümer medeniyetinin temel kaynakları tahıl ve küçükbaş hayvan yetiştiriciliği idi. Tahıllar içerisinde ise buğday, arpa ve baklagiller günümüzde olduğu gibi en önemli türlerdi. Daha sonra bu bölgeden dünyaya yayılan buğday günümüze kadar nerdeyse tüm kıtalarda insanların temel besini olmuştur. 1900'lü yılların başında ABD yetiştirilen buğdayların çok büyük kısmını Türkiye'den giden buğdaylar oluşturmakta idi. Buğday günümüzde Avrupa'nın batısından Hindistan'ın kuzeyine, İskandinav ve Rusya'dan Mısır'a kadar olan coğrafyada yaşayan insanlar tarafından değişmez yiyecek olarak kabul görmektedir. Peki buğdayı böylesine rakipsiz yapan nedir? Buğday deniz seviyesinden çok yükseklere kadar adapte olabilir. Birkaç ay içresinde yetiştirilebilir. Yetiştirilmesi kolaydır, sadece ekilir ve olgun başaklar hasat edilir. Besin değeri yüksektir (%60-80 nişasta ve %8-14 protein). Ekmeklik kalitesi ve lezzeti arpa, mısır, pirinç vs. arasında en iyisidir. Depolaması kolay ve uzun sürelidir. Çeşitler kendine tozlanması nedeniyle değişime uğramadan süre yetiştirilebilir. İlk evcilleştirilen tür olan einkorn bu gün bile ıslah edilmiş çeşitlerle yetiştirilmektedir. Son birkaç yıla kadar dünyada en çok ekilen ve üretilen tahıl buğdaydı. İnsanlar günlük enerji ihtiyaçlarının yarısını buğdaydan sağlamaktadırlar. Yapılan çalışmalar önümüzdeki 20-30 yılda da bu durumun devam edeceğini öngörmektedir. Son yıllarda en çok üretilen tahıl mısır olsa da ancak %10'u insan gıdası olarak tüketilmektedir. Günümüzde bir milyar insan yetersiz beslenmektedir. Yapılan çalışmalarda dünya nüfusunun 2050 yılında 9 milyar olacağı öngörülmektedir. Artan ve yetersiz beslenen nüfusu beslemek için ciddi üretim artışı gerekmektedir. Gelişmekte olan ülkelerde gıda üretimi ikiye katlanmış olsa bile yinede 370 milyon insan açlık sınırının altında kalacaktır. Sadece buğday için bu ihtiyaç mevcut üretimin %16 fazlasıdır. Dünya buğday üretimini %70 daha fazlası potansiyel olarak üretilebilir. Ancak gelişmiş ve dünya buğday üretiminin büyük kısmını karşılayan ülkelerde yaklaşık son 20 yıldır buğdayda verim artışı olmamaktadır, ya da çok az olmaktadır. O zaman bu açık nasıl kapatılacak? Bu açığın büyük kısmı buğday verim potansiyelinin çok altında verim alan gelişmekte olan ülkelerden karşılanacaktır. Üretim artışının ve sürdürülebilirliğinin önündeki engellerden en önemlileri sınırlı topak ve su kaynakları ile iklim değişikliğidir. Önümüzdeki yıllarda bu kaynakların kullanılması ve paylaşılması ile ilgili çatışmalar kaçınılmaz olacaktır. Ciddi kıtlık durumlarında belki de paranın satın alamayacağı tek şey gıda olacaktır. Anahtar kelimeler: Buğday, Buğdayın önemi, Buğdayın yayılışı.
142
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Wheat as Our Basic Food, Past to Future Journey Bekir ATAR1,* 1
Süleyman Demirel Üniversity, The Faculty of Agricultural, Education, Research and Application Center, Isparta, Türkiye *Responsible author e-mail:
[email protected]
Abstract The wheat has been the main food source since it was domesticated with barley, peas, lentils, chickpeas, linen, bitter vetch in the area called the Fertile Crescent, which also includes the southern part of Turkey. In our country and many other country, bread is used in the same sense as food. The relation of man to wheat has begun in the huntergatherer period. With the permanent settlement (8500 BC) it was necessary to find food sources. Wheat and barley are the most suitable vegetable sources. In recent years, some scientists have pointed out that the basis of Western civilization is not the Greek Civilization but the Sumerian Civilization. The main sources of the Sumerian civilization, rising in the fertile Crescent, were cereal and small cattle breeding. In cereals, wheat, barley and legumes were the most important species as they are today. Later, wheat spreading from this region to the other part of the world became the basic food of people in the whole continent. At the beginning of the 1900's, the vast majority of US-cultivated wheats were the wheat from Turkey. Today, wheat is accepted as a stable food by people living in from west of Europe to the north of India, from Scandinavia and Russia to Egypt. What makes wheat so unrivaled? Wheat can be grown up to sea levels too high. It can be cultivated within a few months. Its cultivation is easy, only sown and mature ears are harvested. High nutritional value (60-80% starch and 8-14% protein). Bread quality and taste is the best among the barley, corn, rice etc. Storage is easy and long lasting. Varieties can be grown for a period of time without alteration due to self-pollination. The first domesticated species, einkorn, is grown with cultivated varieties even today. In the last few years, the most cultivated and produced grain in the world was in the wheat. People provide half of their daily energy needs from the wheat. The studies are expected to continue in the next 20-30 years. Although the most produced cereal in recent years is corn, only 10% is consumed as human food. Today, one billion people are undernourished. It is predicted that the world population will be 9 billion by 2050. Serious production increases are needed to feed the growing and malnourished population. Even if food production in the developing world doubles, 370 million people will remain below the hunger limit. Only this requirement for wheat is 16% more than the current production. World wheat production can be potentially produced by more than 70%. However, in countries that have developed and meet most of world wheat production, there has been no increase in yield in wheat for the last 20 years, and very few have. Then how the gap will be meet? Most of this gap will be meet by developing countries which yields below the potential. The most important obstacles to growth and sustainability of wheat production are limited clusters and water resources and climate change. Conflicts over the use and sharing of these resources in the coming years will be inevitable. In serious famine situations, perhaps the only thing that money can not buy is food. Key words: Wheat, Preference of wheat, Distribution of wheat.
143
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Numerical Investigation of a Coupled Passive Cooling System Earth-To Air Heat Exchange and Solar Chimney in Hot Arid Zone Hamida BENCHEİKH¹*, Younes DAOUDJݲ 1, 2
University Amar Telidji, Laboratoire de Génie Civil, Departement of Architecture, Laghouat Algeria. *Responsible author e-mail:
[email protected]
Abstract The papers present a theoretical work on coupled passive cooling system, earth-to air heat exchange and high inertia well insulated solar chimney attached to the building south wall with direct outlet. The system was supposed to be used for summer cooling in hot arid zone in Ghardaia city in the south of Algeria. An investigation on the effects of the systems variable parameters on the cooling efficiency were carried out for hot summer days, these variable parameters were; Pipe: buried depth, cross section, length, disposition, number, and inlet outlet cross sections. Chimney: top and bottom sections, orientation, height, inlet outlet sections and positions, chimney wall insulation and thermal inertia. A numerical simulation carried out during summer days for two similar well insulated buildings, the first one with the above mentioned passive cooling system and the second without any passive features as a reference building, the buildings were assumed located in Ghardaia hot arid climate in the south of Algeria, in order to optimize the above cited variable parameters for the two coupled passive systems. Key words: Coupled systems, solar chimney, geothermal cooling, hot arid climate, soil temperature.
144
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Türkiye’de İklim Değişikliğine Karşı “Kent ve Su” Arasındaki Koruma Kullanma Dengesinin Sağlanmasına Yönelik Stratejiler Beratiye Meral AKDUMAN VURAL1,* Abant İzzet Baysal Üniversitesi, Bolu, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
Özet İklim değişikliğinin olası etkilerine karşı Türkiye’nin fiziki konumuna bakıldığında; potansiyel etkiler açısından Türkiye’nin risk grubu ülkeler arasında yer aldığı görülmekte ve böylece iklim değişikliğinin Türkiye’de neden olabileceği sosyoekonomik ve çevresel etkilerin önemi de ortaya çıkmaktadır. Türkiye’de iklim değişikliğinin yarattığı ve giderek artan riskler, hükümetlerin ya da özel sektörün yatırım kararlarında net bir faktör olarak hesaba katılmamaktadır. Fakat değişken ve belirsizlik içeren iklim koşulları, iklim değişikliğinin etkilerinin belirginleşmesi için kapsamlı etki analizlerinin yapılması ihtiyacını doğurmaktadır. İklim değişikliği etki analizlerinin yapılması; Türkiye’de iklim değişikliğinin çeşitli sektörler ve sosyal kesimlere olan etkilerinin belirlenmesi, iklim değişikliğine uyum politikalarının fayda ve maliyetlerinin hesaplanması, iklim değişikliği politikaları konusunda farklı görüşteki paydaşların uzlaşmalarının sağlanması, belirsizliklerin azaltılması ve dolayısıyla önceliklerin netleştirilmesi açısından önemlidir. Denetimsiz büyüyen kentlerin ve onların yakın çevrelerine verdikleri zararların, küresel ısınma ve çevre kirliliğini tetikleyen sorun alanlarının başında geldikleri görülmektedir. Bu çalışmada, Türkiye’de kentleşme olgusunun çevre kirliliği ve kaynak yönetimi ile olan ilişkisi değerlendirilirken, öncelikle ulusal ve yerel politikalar gözden geçirilmiş; kentlerde çevresel problemler ve kaynak yönetimi konularının doğru ortaya konulabilmesi için var olan kentsel çevre altyapı politikaları, sürdürülebilir kentsel çevre politikaları, ekonomik, toplumsal ve kültürel politikaları yeniden irdelenmiştir. Planlama çalışmalarının olumsuz çevresel etkilerinin en aza indirilmesi amacıyla uygulanması hedeflenen stratejik çevresel değerlendirme, çevresel etki değerlendirme gibi yöntemler ile uluslararası anlaşma ve sözleşmeler yürürlüğe konarak; planlama sürecinin niteliğinin arttırılması, çevre duyarlı planlara ulaşılması ve yerelde halkın planlama sürecine etkin olarak katılması sağlanmalıdır. İklim değişikliğine uyum konusunda suyun önemi yadsınamaz bir gerçek olduğundan; kent ve su arasındaki koruma kullanma dengesinin sağlanmasına yönelik uyumlu stratejiler geliştirebilmek için; üst ölçekte uyum politikaları geliştirilerek işbirliği teşvik edilmeli, ortak amaçlar tanımlanarak paydaşları bir araya getirecek bilgi paylaşım platformları organize edilmelidir. Anahtar kelimeler: İklim, koruma, kent, su.
145
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Strategies for the Protection and Usage Balance Between "Urban and Water" Against Climate Change in Turkey Beratiye Meral AKDUMAN VURAL1,* Abant İzzet Baysal University, Bolu, Turkey *Responsible author e-mail:
[email protected] 1
Abstract When we look at Turkey's physical location against the possible effects of climate change; Turkey appears to be among the countries of risk group, and thus, the importance of socio-economic and environmental impacts that climate change could cause in Turkey also emerges. The risks that created and increasingly by climate change in Turkey are not considered as a clear factor in investment decisions of governments or private sector. However, climatic conditions with variable and uncertainty creates need to be carried out comprehensive impact analysis to disambiguate the effects of climate change. Analysing of the climate change impact; determination of the impacts of climate change on various sectors and social groups in Turkey is important in terms of making calculation the benefits and costs of adaptation policies to climate change policies, ensuring consensus among different stakeholders on climate change policies, reducing uncertainties and thus clarifying priorities. Cities that are growing uncontrolled and the damages they cause to their immediate surroundings are at the primary of problem areas that trigger global warming and environmental pollution. In this study, while the relationship between urbanization in Turkey and environmental pollution and resource management was assessed, firstly national and local policies were reviewed; in order to be able to set forth the environmental problems and resource management issues in the urbans correctly, existing urban environmental infrastructure policies, sustainable urban environmental policies, economic, social and cultural policies were re-exemined. Strategic environmental assessment to be implemented in order to minimize the negative environmental effects of planning studies, by putting into effect the methods such as environmental impact assessment and international agreements and conventions; it should be Increased the quality of the planning process, achieved environmentally sensitive planning and ensured that local people are actively involved in the planning process. Due to the fact that the importance of water for adaptation to climate change is an undeniable reality; to develop coherent strategies for ensuring the protection and usage balance between city and water; Cooperation should be encouraged by developing compliance policies at the upper level and information sharing platforms should be established to identify the common objectives and bring the stakeholders together. Key words: Climate, protection, urban, water.
146
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Yeşil Sürdürülebilir Kentsel Yenileşme: Bolu İli Üzerinden Bir Değerlendirme Beratiye Meral AKDUMAN VURAL1,* Abant İzzet Baysal Üniversitesi, Bolu, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
Özet 1970’li yıllardan bu yana ekonomi, toplum ve çevre arasında kurulmak istenen dengenin yeni bir anlatımı olarak ortaya çıkan “Sürekli ve dengeli kalkınma ya da sürdürülebilir kalkınma/gelişme” kavramı; bugünün gereksinmelerini, gelecek kuşakların da kendi gereksinmelerini karşılama olanaklarını ellerinden almadan karşılamak olarak tanımlanmaktadır. Kentlerin hızlı ve denetimsiz gelişmesi, yaşamın sürdürülebilmesi için gerekli kaynakları tehdit etmekte; kentlerde yaşayan bireylerin yaşam niteliklerinin bozulmasına yol açmaktadır. Düzensiz ve denetimsiz kentleşme doğayı etkilemekte; kent içindeki özel mekanların ve kültürel değerlerin de yok olmasına neden olmaktadır. Bunun sonucunda bireylerin yere ait aidiyet duyguları da hasar görmekte; bir yeri korumaktan, sahiplenmekten vazgeçmeyi getirmekte, umursamazlık ve kayıtsız kalma duygularını ön plana çıkarmaktadır. Dünya üzerinde gerçekleşen değişim ve dönüşümün temel ögesinin insan olduğu kabul edilirse; sürdürülebilirlik, öncelikle insan/insan davranışları ve yaşamın sürdürülebilirliği bağlamında ele alınabilmektedir. İnsan yaşamının sürdürülebilirliğinin sağlanabilmesi için toplumsal, çevresel ve ekonomik koşulların yeterli ve dengeli dağılması gerekmektedir. Bu çalışmada; sürdürülebilir kentler sürdürülebilir mahalleler ile var olabilir fikrinden hareketle, bu mahalleleri üretmek için nelere ihtiyaç duyulacağı belirlenerek, sürdürülebilir mahalle kavramının uygulamada ne anlama geldiği irdelenmektedir. Çalışma çerçevesinde; yerel ölçekte bir model geliştirebilmek için, mülk sahiplerinin toplanarak katılımcı bir model oluşturabilmesi ve sermayeyi sağlayacak özel sektörün/girişimcinin bu tür uzun vadeli projelere sıcak bakmasının büyük önem taşımaktadır. Bu bağlamda; küresel taleplere cevap verebilecek, küresel ekonomide yarışabilirliği karşılayacak potansiyellerin belirlendiği alanlar ile; sağlıklı ve modern koşullara ulaştırılması hedeflenen gecekondu alanları Bolu’da yenileştirme projelerinin gerçekleştirilebileceği faaliyet alanlar olarak belirlenmiştir. Planlama yaklaşımının yeniden ele alınarak gerekli düzenlemelerin yapılması ve yenileşme/koruma çalışmalarına temel olacak şekilde ortaya konması gerekmektedir. Anahtar kelimeler: Sürdürülebilirlik, kalkınma, yenileşme, gelişme, dönüşüm.
147
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Green Sustainable Urban Renovation: An Assessment on Bolu Province Beratiye Meral AKDUMAN VURAL1,* Abant İzzet Baysal University, Bolu, Turkey *Responsible author e-mail:
[email protected] 1
Abstract The concept of "continuous and balanced development or sustainable development/progression" which emerged as a new expression of the equilibrium to be established between the economy, society and the environment since the 1970s; is defined as meeting the needs of today and the opportunities for future generations to meet their own needs without getting them from their hands. The rapid and uncontrolled development of urbans threatens the resources needed to maintain life; leading to deterioration of the quality of life of the people living in the urbans. Irregular and uncontrolled urbanization affects nature; it also causes the destruction of private places and cultural values in the urban. And consequently, the sense of belonging of the individuals to the region is also damaged; It causes the individuals to abandon the protection and adoption of a region, it brings feelings of recklessness and indifference into the forefront. If it is accepted that the basic factor of change and transformation on Earth is human; Sustainability can be considered primarily in the context of human/human behavior and the sustainability of life. In order to ensure the sustainability of human life, social, environmental and economic conditions need to be distributed adequate and equel. In this study; moving from the idea that sustainable urbans may exist with sustainable neighborhoods, by being determined what to need to create these neighborhoods, what the concept of sustainable neighborhood means in practice is examined. In the framework of the study; it is vital that by coming together of the property owners to create a participatory model, and that the private sector / entrepreneur, who will provide capital, leaning to such long-term projects. In this context; with the areas where the potentials that would be able to respond to global demands and encourage competition in the global economy are determined; slum areas that are targeted to be reached healthy and modern conditions is defined as activity areas in Bolu where the renovation projects to be performed. By re-considering the planning arrangements, to being made the necessary arrangements, and it needs to be set forth to form the basis for studies of protection/renovation. Key words: Sustainability, development, renovation, progression, transformation.
148
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Mimarın Yapısal Atık Oluşumunda Etkisi Berfin PAKER1,*, Nilüfer TAŞ2 Uludağ Üniversitesi, Bursa, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
Özet Endüstri devrimi ile başlayan endüstrileşme hareketi özellikle 20. yüzyılın başlarından itibaren hızla ilerlemiş; teknolojik gelişmelerle birlikte çevresel, ekonomik ve sosyal sorunlar artmıştır. Günümüzde hemen her alanda karşımıza çıkan bu olumsuz koşullar insanlığın geleceğini etkileyecek düzeylere ulaşmıştır. Bu sorunların çözümüne yönelik olarak sürdürülebilirlik kavramı ortaya çıkmış ve dünyanın önemli gündem maddeleri arasında yer almaya başlamıştır. Sürdürülebilir yapım kriterleri içinde önemli başlıklardan biri olan atık yönetimi ve azaltımı ise üzerinde çalışılmasıyla toplumların kalkınması hedeflenmektedir. Tasarım süreci; fizibilite aşaması, tasarım aşaması (konsept proje, uygulama projesi) ve dökümanların hazırlanmasından oluşmaktadır. Yapı oluşumunu bir orkestra çalışması olarak görürsek tasarım sürecini ve tasarımcısını bu orkestranın şefi vazifesiyle bütünleştirebiliriz. Tasarım süreci yapı öncesi, yapı dönemi ve yapı sonrası olan dönemleri yakından etkilemektedir. Sürdürülebilir yapı yaşam döngüsü; tasarım ve planlama, yapım, kullanım, yıkım ve geri dönüşüm evrelerinden oluşmakta olsa dahi tasarım aşaması tüm bu sürecin başından sonuna kadar yer almaktadır. Çalışmada tasarım sürecinin; yapım, kullanım, yıkım ve sonrasında yeniden kullanım aşamalarında oluşan yapısal atıklara etkisi incelenecektir. Yapılan literatür araştırmalarında yapısal atıkların büyük bir bölümünün tasarım sürecindeki eksik ve/veya hatalardan kaynaklandığı ortaya çıkmaktadır. Doğru kurgulanan ve işleyen bir tasarım süreci ile yapım, kullanım ve söküm aşamalarında yapısal atık azaltımını en üst seviyeye taşınabileceği görülmektedir. Çalışmanın amacı: sürdürülebilir binalar için atık yönetiminin faydalarının önemini vurgulamak, tasarımcının atık yönetimi ile ilişkisinin önemini irdelemektir. Mimarın tasarım aşamasında sürdürülebilirlik ilkeleri göz önünde bulundurulmasıyla ilgili önlemlerin alınması mal sahibi ve kullanıcısı açısından; sosyal, ekonomik ve ekolojik boyutlarda gelişimine katkı sağlanılması hedeflenmektedir. Anahtar kelimeler: “Sürdürülebilir yapım”, “yapısal atık azaltımı”, “tasarımcının yapısal atık oluşumundaki rolü”.
149
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Architect's Effect In Structural Waste Berfin PAKER1,*, Nilüfer TAŞ2 1
Uludag University, Bursa, Turkey *Responsible author e-mail:
[email protected]
Abstract The industrialization movement that started with the industrial revolution has progressed rapidly since the beginning of the 20th century; Along with technological improvements, environmental, economic and social problems have increased. These opposite conditions that have been encountered in almost every area today have reached levels that will affect the future of mankind. In order to solve these problems, the concept of sustainability has emerged and it has become one of the important agenda items of the world. Waste management and waste reduction, one of the most important topics in sustainable construction criteria, is aimed at the development of communities by working on it. Design process; Feasibility stage, design stage (concept project, application project) and preparation of documents. If we see the building formation as an orchestra work, we can say that the architect is the chief of this orchestra. The design process closely influences pre-building, building and post-construction periods. Sustainable building life cycle; design and planning, construction, use, destruction and recycling. The design phase is from the beginning to the end of the entire process. During the design process; construction, use, demolition and subsequent reuse will be examined. In the literature investigations made, it appears that a large part of the structural wastes originate from deficiencies and errors in the design process. With a properly designed; design process, structural waste reduction and dismantling phases can be carried to the highest levels during construction. The aim of the work: to emphasize the importance of the benefits of waste management for sustainable buildings, the importance of the designer's connection with waste management. Taking the necessary precautions in the design phase, in terms of the owner and user; social, economic and ecological dimensions. Key words: "Sustainable construction", "Structural waste reduction", "The role of the designer in the formation of structural waste".
150
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
4-(4-Klorofenilaminoisonitrosoasetil) bifenil (KAKO) ile Modifiye Edilmiş Genleştirilmiş Cam Küreciklerin Karakterizasyonu ve Ni(II) Giderimi Tugba SARDOHAN KOSEOGLU1,*, Berrin KIR2, Bulent DEDE2, Esengul KIR2, Fatma KARIPCIN3 1
Süleyman Demirel Üniversitesi, Teknoloji Fakültesi, Biyomedikal Mühendisliği Bölümü, Isparta, Türkiye 2 Süleyman Demirel Üniversitesi, Fen Edebiyat Fakültesi, Kimya Bölümü, Isparta, Türkiye 3 Nevşehir Hacı Bektaş Veli Üniversitesi, Fen-Edebiyat Fakültesi, Kimya Bölümü, Nevşehir, Türkiye *Sorumlu yazar e-posta:
[email protected]
Özet Hızlı sanayileşme nedeni ile birçok ağır metal çevreye deşarj edilmektedir. Ağır metaller toksik ve kanserojen olmalarının yanı sıra biyolojik olarak parçalanamadıkları için canlı organizmalarda birikme potansiyeline sahiptir. Çimento, boya, elektroliz, deri tabaklama, fotoğrafçılık, elektronik, pil ve metal endüstrisi gibi bazı endüstriyel atık sularda önemli miktarlarda bulunan nikelin Ni0 ve Ni2+ formları oldukça kanserojendir. Bu durum, çevresel ortamlarda nikel iyonlarının birikmesine ve dolayısıyla çevre ve insan sağlığına ciddi bir tehlike oluşturmasına neden olmuştur. Dünya Sağlık Örgütü, Ni(II) iyonlarının içme suyunda izin verilen limitlerini 0.01 mg/L olarak belirlemiştir. Bu nedenle, sucul ortamlardaki nikel kirliliğini önlemek için nikel iyonlarını endüstriyel atıksulardan ayırmak ve geri kazanmak çok önemlidir. Sulu çözelti ve atık sulardan nikelin uzaklaştırılması için adsorpsiyon, membran prosesleri, koagülasyon/flokülasyon, kimyasal çökeltme, elektrokimyasal teknikler, fotokatalitik bozundurma ve iyon değişimi gibi çeşitli kimyasal ve fiziksel teknikler mevcuttur. Adsorpsiyon, ekonomik olarak uygulanabilirliği ve yüksek adsorpsiyon kapasitesi nedeniyle atık suların arıtılması için en umut verici yöntemlerden biri olarak bilinmektedir. Çalışmamızda, genleştirilmiş cam kürecikler (GA) kullanılarak sulu çözeltilerden Ni(II) iyonunun adsorpsiyon yöntemi ile uzaklaştırılması hedeflenmiştir. Bu amaçla, öncelikle cam kürecikler NaOH ile aktifleştirilmiştir. İkinci aşama olarak, kuru toluen içerisine alınan aktifleştirilmiş cam kürecikler üzerine 3-aminopropiltrietoksisilan (APTES) ilave edilerek silanlama işlemi gerçekleştirilmiştir. Son olarak, silanlanmış cam küreciklerin (GA-APTES) yüzeyi 4-(4-Klorofenilaminoisonitrosoasetil)bifenil, (KAKO) ile modifiye edilmiştir. Modifiye edilen bu bileşik GA-APTES-KAKO adsorban maddesi olarak adlandırılmıştır. Yeni hazırlanan adsorban maddenin yapı karakterizasyonu termogravimetrik analiz (TGA), taramalı elektron mikroskobu (SEM) ve infrared spektroskopisi (FTIR) yöntemleriyle gerçekleştirilmiştir. Her üç aşamada elde edilen numunelerin elementel kompozisyonu SEM-EDS ile incelenmiştir. Modifiye edilen cam küreciklerin (GA, GA-APTES, GA-APTES-KAKO) SEM görüntülerinde farklılıklar gözlemlenmiştir. Cam küredeki bu değişim silanlama ve modifikasyon işlemlerinin başarılı bir şekilde gerçekleştiğini göstermiştir. Sorpsiyon özelliğine sahip bu cam kürecikler ile sulu çözeltideki Ni(II) iyonunun adsorpsiyon özellikleri incelenmiştir. Deneyler sonucunda GA-APTES-KAKO adsorban maddesinin Ni(II) iyonu için uygun olduğu belirlenmiştir. Adsorpsiyona etki eden parametreler de ayrıca incelenmiştir. Anahtar kelimeler: Adsorpsiyon, Cam kürecik, Ni(II).
151
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Characterization of Modified Expanded Glass Beads with 4- (4Chlorophenylaminoisonitrosoacetyl) biphenyl and Ni(II) Removal Tugba SARDOHAN KOSEOGLU1,*, Berrin KIR2, Bulent DEDE2, Esengul KIR2, Fatma KARIPCIN3 1Suleyman
Demirel University, Faculty of Technology, Dept. of Biomedical Engineering , Isparta, Turkey Suleyman Demirel University, Faculty of Arts and Sciences, Dept. of Chemistry, Isparta, Turkey 3Nevsehir Haci Bektas Veli University, Faculty of Arts and Sciences, Dept. of Chemistry, Nevşehir, Türkiye 2
*Responsible author e-mail:
[email protected]
Abstract Due to rapid industrialization, various heavy metals are discharged into the environment. In addition to being toxic and carcinogenic, heavy metals have the potential to accumulate in living organisms as they are not biodegraded. Ni0 and Ni2+ forms of nickel are highly carcinogenic which are found in large quantities in the wastewaters of cement, dye, electrolysis, tannery, photography, electronics, battery and metal industry. This has resulted in the accumulation of nickel ions in the environment and thus a serious danger to the environment and human health. The World Health Organization has published permissible limits for Ni(II) ions in drinking water up to 0.01 mg/L. Thus, it is very important to remove and recover nickel ions from industrial wastewaters to prevent nickel pollution in the environment. Various chemical and physical techniques such as adsorption, membrane processes, coagulation/flocculation, chemical precipitation, electrochemical techniques, photocatalytic degradation, and ion exchange are available for the removal of nickel from aqueous solutions and wastewaters. Adsorption is considered as one of the most promising methods for treating wastewater due to its economic viability and high adsorption capacity. The main goal of the study was to remove Ni(II) ions from aqueous solutions by using adsorption method using expanded glass spheres with different forms (GA). For this purpose, glass beads are activated with NaOH. As a second step, silane treatment was carried out by adding 3-aminopropyltriethoxysilane (APTES) to the activated glass beads in dry toluene. Finally, the surface of the silanized glass spheres (GA-APTES) was modified with 4- (4-Chlorophenylaminoisonitrosoacetyl) biphenyl. This modified compound was named GA-APTES-KAKO adsorbent. Structural characterization of novel adsorbent was carried out by thermogravimetric analysis (TGA), scanning electron microscopy (SEM) and infrared spectroscopy (FTIR). The elemental composition of the samples obtained in all three stages was examined by SEM-EDS. Differences were observed in SEM images of modified glass beads (GA, GA-APTES, GA-APTES-KAKO). Changes observed in glass beads has shown that silanization and modification processes have been successful. Adsorption properties of developed glass bead for Ni(II) ion in the aqueous solutions were investigated. As a result, it was determined that GA-APTESKAKO adsorbent was suitable for Ni(II) ion adsorption. Parameters affecting adsorption were also investigated. Key words: Adsorption, Glass aggregate, Ni(II).
152
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Antik Çağda Anadolu’da Spor Turizmi Beste TOMAY1, , Hatice DEĞİRMENCİOĞLU2 Akdeniz Üniversitesi, Edebiyat Fakültesi, Arkeoloji Bölümü, Klasik Arkeoloji Anabilim Dalı, Antalya, Türkiye
1
Akdeniz Üniversitesi, Edebiyat Fakültesi, Arkeoloji Bölümü, Klasik Arkeoloji Anabilim Dalı, Antalya, Türkiye.
2
*
Sorumlu yazar e-posta:
[email protected]
Özet Bu çalışma antik çağ Anadolusu’nda spor turizmi faaliyetleri üzerine gerçekleştirilecektir. Spor insanlık tarihi kadar eski bir faaliyet olup hem fiziksel ve psikolojik haz vermesi hem de toplumsal dayanışma ve bütünleşmeyi sağlaması açısından önem arz etmektedir. Spor, insanların ve farklı kültürlerin birbirlerini daha iyi tanımalarına olanak sağlayan önemli bir alandır. Çalışmanın amacı, tarihte ilk spor faaliyetlerinden başlayarak antik çağda Anadolu’da spor turizminin kökenine ve tarihsel süreç içerisinde gelişimine değinmek ve bu amaca hizmet eden gymnasium, stadium gibi kamu yapı örneklerine ve buluntulara odaklanmaktır. Çalışmada gösterilen örneklere ulaşmak için arkeolojik, epigrafik ve tarihi çalışmalardan faydalanılmıştır. Kaynakların incelenmesi aşamasında sporun başlangıcından itibaren spor faaliyetlerine yönelik elde edilen veriler turizm faaliyetleriyle ilişkilendirilerek Anadolu’da spor faaliyetleri için inşa edilmiş yapılara, bu bağlamda düzenlenen festival, şenlik gibi organizasyonlara, sporculara yönelik yapılan lahit, onurlandırma yazıtları gibi eserlere de yer verilmiştir. Makalede turizm kavramı ve spor turizminin ortaya çıkışı göz önünde bulundurularak antik çağda spor turizmi faaliyetlerine örnekler verilmektedir. Sonrasında bu örneklere paralel olarak Anadolu’da spor turizmine yönelik kamu yapıları ışığında antik çağda sporun ve spor turizminin önemi vurgulanmaktadır. Sonuçta Anadolu’nun spor turizmi açısından tarihteki yeri ve rolü değerlendirilecektir. Anahtar kelimeler: Antik çağ, Anadolu, Spor, Spor Turizmi, Gymnasium.
153
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sport Tourism in Anatolia in Ancient Time Beste TOMAY1,*, Hatice DEĞİRMENCİOĞLU 2 Akdeniz Üniversitesi, Edebiyat Fakültesi, Arkeoloji Bölümü, Klasik Arkeoloji Anabilim Dalı, Antalya, Türkiye
1
Akdeniz Üniversitesi, Edebiyat Fakültesi, Arkeoloji Bölümü, Klasik Arkeoloji Anabilim Dalı, Antalya, Türkiye
2
*Responsible author e-mail:
[email protected]
Abstract This study will be carried out about sport tourism activities in Anatolia of ancient time. Sport is an activity as old as human history and it has importance in terms of both giving physical and psychological pleasure and providing social solidarity and coalescence. The sport is an important field that gives people and different cultures opportunity to know each other. The aim of the study is to mention about origin of sport tourism in Anatolia in ancient time beginning from first sport activities in history and its development and focus on public buildings samples such as gymnasium, stadium that serve to sport tourism and findings. Archaeological, epigraphical and historical studies have been benefited for accessing the examples in the study. During process of the examination of sources, also buildings built for sporting activities in Anatolia, organizations such as festivals, festivities set up in this context and works produced for sportsmen such as sarcophagus, honouring inscriptions have been mentioned by being associated data about sport tourism from the beginning of the sport with tourism activities. In the article, sport tourism activities in ancient time are given by considering tourism term and emergence of sport tourism. Then, parallel to these samples, importance of the sport and sport tourism in ancient time are emphasized in the light of sport constructions in Anatolia. Finally, place and role of Anatolia are evaluated in terms of sport tourism. Key words: Ancient time, Anatolia, Sport, Sport Tourism, Gymnasium.
154
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Erasmus + Projesi app_Healthy_Fish: Balık Çiftliklerinde Balık Sağlığı ve Refahı İçin Çiftlik Personelinin Beceri ve Deneyimlerini Yükseltmek Amaçlı İnovatif Ürünler (Cep Telefonu ve Tabletler) İçin Yeni Uygulamalar Güzel YÜCEL GİER1,*, Betül BARDAKCI ŞENER2, Eyüp Mümtaz TIRAŞIN3 1,2,3
Deniz Bilimleri ve Teknolojisi Enstitüsü, Dokuz Eylül Universitesi, İzmir Türkiye *Sorumlu yazar e-mail:
[email protected]
Özet App_HEALTHY_FISH, İspanyol Deniz Balık Çiftliği Birliği (APROMAR) liderliğinde ve diğer dört ortağın katıldığı bir ERASMUS + programı kapsamında yürütülmekte olan bir projedir. Proje ortakları SGS Tecnos (İspanya), İtalyan Su Ürünleri Birliği API (Associazione Piscicoltori Italiani), Dokuz Eylül Deniz Bilimleri ve Teknolojisi Enstitüsü (DBTE) ve Hırvatistan Ekonomi Odası (CCE)’dir. Projenin amacı, su ürünleri yetiştiriciliği sektörü için Avrupa düzeyinde standartlaştırılmış bir Eğitim Programı geliştirilmesi ve eğitim için gerekli olan profesyonel modüllerin oluşturulmasıdır. Oluşturulan bu modullere dayanarak geliştirilen Standardize Eğitim Programının cep telefonu ve tabletler için 'Aplikasyon prototipi' uygulanması projenin nihai hedefidir. Bu yüzden bu proje teknolojik bakış açısıyla önemli bir yenilik sunmaktadır. Eğitim programını geliştirmeden önce her bir ortak akuakültür çiftliklerinde yeterli üretim ve yönetimi sağlayabilmek için ihtiyaç duyulan eğitimler ve yetenekleri tespit etmeye yönelik anket çalışmasını gerçekleştirmişlerdir. Her bir ortak ülkeden; akuakültür şirketleri, akuakültür çiftlik çalışanları ve sektör işletmeleri ile veterinerlik hizmeti sağlayıcılarının dahil olduğu 10 katılımcı ile birlikte bu anketler tamamlanmıştır. Proje ortaklarının ülkelerinde yapmış oldukları anket çalışmalarından sonra 11 ortak modül oluşturulmuştur. Yürütülmekte olan bu projenin her ortağı bu 'Aplikasyon prototipi’ni, yenilikçi, eğitim ve kullanılabilirlik açısından eksiklikleri ve iyileştirmeleri belirleyerek, kendi ülkelerindeki akuakültür sektöründeki profesyoneller ile birlikte test etme aşamasında olup, sonuçları konferans sırasında sunulacaktır. Bu proje Avrupa Birliği Erasmus +programı kapsamında desteklenmiştir. Anahtar kelimeler: Akuakültür, eğitim,balık refahı, mobil uygulama.
155
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Erasmus + Project app_Healthy_Fish: An Application for Innovative Tools (App For Mobiles and Tablets) That Qualifies the Staff on Health and Welfare of Fish in the Aquaculture Farms Güzel YÜCEL GİER1,*, Betül BARDAKCI ŞENER2, Eyüp Mümtaz TIRAŞIN3 1,2,3
Institute of Marine Sciences & Technology, Dokuz Eylul University, İzmir Turkey *Responsible author e-mail:
[email protected]
Abstract The app_HEALTHY_FISH is an ERASMUS+ project led by the Spanish Marine Fish Farming Association (APROMAR) in collaboration with four partners: SGS Tecnos (Spain), the Italian Aquaculture Association API (Associazione Piscicoltori Italiani), the Turkish Dokuz Eylül University, Institute of Marine Sciences and Technology (DEUIMST) and the Croatian Chamber of Economy (CCE). Its objective is to develop an education program, standardised at European level for aquaculture sector and to prepare professional education modules necessary for education. The overall aim is to develop an ‘application prototype' based on standardised education program consists of modules developed for cell phones and tablets. Therefore, this project signifies an important innovation from a technological point of view. Before designing the training program, each partner conducted a survey to determine the training and skills needed for adequate management and production of fish in aquaculture farms. A number of ten 10 participants, including aquaculture companies, aquaculture farm employees and veterinary services from each partner country completed the survey. 11 common modules were developed after the questionnaire studies conducted by the project partners in their countries. Each partner of the project being undertaken is in the process of testing the “Application Prototype” with the professionals in the aquaculture sector in their country, setting out the deficiencies and improvements in terms of innovation, training and usability and delivering the results during the conference. This project is supported under the European Union's Erasmus + program. Key words: Aquaculture, training, fish welfare, mobile application.
156
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Biomass Supply Chain: A Literature Review Bilge BİLGEN1,*, Yeşim GİTAL 2 1
2
Dokuz Eylul University, Department of Industrial Engineering, Izmir, Turkey Dokuz Eylul University, The Graduate School of Natural and Applied Sciences, Department of Industrial Engineering Institution, Izmir, Turkey *Responsible author e-mail:
[email protected]
Abstract Biomass, which entails any organic matter derived from living organisms, is one of the most utilized sources of renewable energy. In the biomass supply chain management, sustainability concept is to able to meet today's energy needs by preserving environmental responsibility, economic aspect, and quality of life considering security of future generations’ ability to meet their needs of energy. The increasing dependence of the world on energy and the limited fossil fuel resources have led researchers to focus on energy sources that can meet future energy needs. As well as, the negative environmental factors have taken attention in recent years which arise with the usage of fossil fuels. In order to reduce both environmental impacts and secure the future energy demand, most of research have taken the issue of biomass. Biomass feedstock can be defined industrial waste, agricultural residues, forests which are used for producing bioenergy generation. The biomass feedstock, biofuels, and the related production processes can be classified into three generations. The first generation biomass is based on the materials that can also be used as human food and endanger the safety of food supply. The second generation biofuels are produced from such non-food feedstock as cellulosic biomass, woody crops, and agricultural residues or waste which make the fuel production process more difficult. The third generation bio-fuel, recently joined the main classification, is the one produced from algae. This study aims to analyzes why biomass to bioenergy production is needed and reviews the previous studies about biomass supply chain network design. Key words: Biomass supply chain, network design, sustainability.
157
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürdürülebilir Kalkınma ve Hemşirelik Oya Nuran EMİROĞLU1, Bilge KALANLAR2,*, Hacettepe Üniversitesi Hemşirelik Fakültesi Halk Sağlığı Hemşireliği Anabilim Dalı, Ankara, Türkiye Hacettepe Üniversitesi Hemşirelik Fakültesi Halk Sağlığı Hemşireliği Anabilim Dalı, Ankara, Türkiye *Sorumlu yazar e-posta:
[email protected]
1 2
Özet Sürdürülebilir kalkınma; Toplumların bugünkü gereksinimlerini karşılama becerilerinin geliştirilmesi ile birlikte gelecek kuşakların gereksinimlerini karşılayabilme vizyonu ile bu günün olanaklarının korunarak geliştirilmesini önceleyen bir gelişme sürecidir. Ocak 2016 yılında Birleşmiş Milletler sürdürülebilir kalkınma hedefleri (SDG) geniş bir gündemle küresel çabaların odağında yer almıştır. SDG'ler, BM binyıl kalkınma hedefleri (Binyıl Kalkınma Hedefleri) olarak Birleşmiş Milletler tarafından sahiplenildi. Uluslararası Hemşireler Birliği (ICN) nin 2017 yılı teması “Sürdürülebilir Kalkınma Hedeflerine Ulaşmada İzlenecek Bir Ses: Hemşireler” olarak belirlenmiş ve tüm ülkelerde bu tema yıl boyunca hemşirelik kurumları, dernekleri, eğitim, araştırma ve uygulama alanlarında ele alınmaktadır. Çalışma tüm Sürdürülebilir Kalkınma Hedeflerini kapsamakla birlikte bu hedeflere ulaşmada hemşirelerin katkısı ve rolünün belirlenmesini amaçlamaktadır. Bu hedefler sağlığı belirleyicilerle çakışmakta ve özellikle halk sağlığı hizmeti kapsamında ele alınmaktadır. Sonuç olarak hemşirelerin sağlık bakımında ki temel rolleri olan bakım verici, karar verici, etkili iletişim, bakım yönetimi, hasta savunuculuğu ve eğitici roller ile holistik bakış açısı ve kanıta dayalı uygulamalar yolu ile, eğitim, araştırma ve uygulamalarında kalkınma hedefleri doğrultusunda hizmeti sürdürmesi gereklidir. Bu nedenle hemşirelerin bu konuda farkındalıklarının artırılması çalışmanın temel önerisidir. Anahtar kelimeler: Sürdürülebilir kalkınma, hemşirelik, kalkınma hedefleri.
158
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sustainable Development and Nursing Oya Nuran EMİROĞLU1, Bilge KALANLAR2,* 1 2
Hacettepe University Nursing Faculty Department of Public Health Nursing, Ankara, Turkey Hacettepe University Nursing Faculty Department of Public Health Nursing, Ankara, Turkey *Responsible author e-mail:
[email protected]
Abstract Sustainable development; with the development of communities' ability to meet today's needs, and with the vision of meeting the needs of future generations, it is a developmental process that advances the preservation and development of today's possibilities. In January 2016, the United Nations Sustainable Development Goals (SDG) took a global agenda to address global efforts. The SDGs were owned by the United Nations as UN Millennium Development Goals (Millennium Development Goals). The International Nurses Association (ICN) theme for 2017 has been identified as "A Voice to Be Followed in the Sustainable Development Goals: Nurses", and in all countries this theme is addressed throughout the year in nursing institutions, associations, education, research and practice areas. The study covers all Sustainable Development Goals and aims to determine the contribution and role of nurses in achieving these goals. These targets coincide with healthcare determinants and are particularly addressed in the context of public health services. In conclusion, it is necessary for nurses to maintain their services in the direction of development goals in their education, research and practice through the main roles of nurses in health care, including caregiver, decision maker, effective communication, care management, patient advocacy and educational roles and holistic perspective and evidence based practices. For this reason, raising the awareness of nurses in this issue is the basic recommendation of the study. Key words: Sustainable development, nursing, development goals.
159
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Birinci Basamakta Halk Sağlığı Hemşireliği ve Sürdürülebilir Kalkınma Hedefleri Oya Nuran EMİROĞLU1, Bilge KALANLAR2,* Hacettepe Üniversitesi Hemşirelik Fakültesi Halk Sağlığı Hemşireliği Anabilim Dalı, Ankara, Türkiye Hacettepe Üniversitesi Hemşirelik Fakültesi Halk Sağlığı Hemşireliği Anabilim Dalı, Ankara, Türkiye *Sorumlu yazar e-posta:
[email protected]
1 2
Özet Sürdürülebilir kalkınma hedefleri doğrudan özellikli olarak birey aile ve toplumun sağlığını ilgilendirmektedir. Birinci basamak sağlık hizmetleri sağlık hizmetleri yapılanmasının temeli olup, etkin bir birinci basamak sağlık hizmet sunumuna sahip ülkelerde birey aile ve toplumun sağlık ihtiyaçlarına daha iyi yanıt verilebileceği, sağlıkta daha eşitlikçi bir hizmet sunumu sağlanacağı ve sağlık harcamalarının daha maliyet etkin olacağı ön görülmektedir. Bu sitem içerisinde toplumla birebir iletişim halinde olan sağlık personellerinden birisi de hemşireler olup birinci basamak özelinde ise halk sağlığı hemşireleridir. Çalışmada amaç halk sağlığı korunma yaklaşımı bağlamında birinci basamak sağlık hizmetleri temelinde sürdürülebilir kalkınma hedeflerini değerlendirmek ve halk sağlığı hemşiresinin bu çerçevede ki rol sorumluluklarını incelemektir. Sonuç olarak, birincil korumada kalkınma hedefli problemlerin ortaya çıkmasını önlemek için önlemler almak amaçlanır. Bu amaca ulaşmak için hemşireler öncelikle risk gruplarını belirlemeli, sağlık eğitimi vermeli ve sorunların çözümünde işbirliği yapabileceği destekleyici hizmetleri düzenlemelidir. İkincil korunmanın stratejileri; risk gruplarının sorunlarını belirlemek, kalkınma hedeflerinde yer alan sorunlardan bir belirtiye rastlandığında derhal müdahale etmek, sorunların giderilmesi için toplumdaki hizmet birimleri ile işbirliği yapmak olmalıdır. Üçüncül koruma da ise tüm hedefler düzeyinde rehabilitasyon ve danışmanlık hizmetleri yapılmalıdır. Koruma düzeyleri bağlamında ele alınan olan bu çalışmada halk sağlığı hemşiresinin görevlerinin sürdürülebilir kalkınma hedeflerinin karşılanmasındaki önemli rolü açıklanacaktır. Anahtar kelimeler: Sürdürülebilir kalkınma hedefleri, hemşirelik, birinci basamak.
160
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Public Health Nursing and Sustainable Development Goals in the Primary Healthcare Services Oya Nuran EMİROĞLU1, Bilge KALANLAR2,* 1 2
Hacettepe University Nursing Faculty Department of Public Health Nursing, Ankara, Turkey Hacettepe University Nursing Faculty Department of Public Health Nursing, Ankara, Turkey *Responsible author e-mail:
[email protected]
Abstract Sustainable development objectives directly concern the health of the individual family and the community. Primary health care services are based on the structure of health services and it is predicted that in countries with an effective primary care delivery service, individuals can better respond to family and community health needs, provide a more equitable service in health and health spending will be more cost effective. Within this system, one of the health personnel who are communicating with the society is nurses and the public health nurses in the first step. The purpose of the study is to assess the sustainable development objectives on the basis of primary health care in the context of the public health protection approach and to examine the role responsibilities of the public health nurse in this framework. As a result, it is aimed to take measures to prevent the development of developmental problems in the primary protection. To achieve this goal, nurses must first establish risk groups, provide health education, and provide supportive services that can cooperate in resolving problems. Strategies of secondary preservation; to identify the problems of the risk groups, to intervene promptly when a symptom of the problems in development targets is found, and to cooperate with the service units in the community to solve the problems. In tertiary protection, rehabilitation and counseling services should be provided at all goals. This study, which is addressed in the context of health promotion levels, will explain the important role of the public health nurse in meeting the sustainable development goals. Key words: Sustainable development goals, nursing, primary care.
161
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Güneş Enerjisi Kaynaklı Resorbsiyonlu Soğutma Sistemleri ile Soğuk Depo Uygulamaları Bilsay PASTAKKAYA1,*, Kürşat ÜNLÜ 2 Uludağ Üniversitesi Orhangazi YAÇMYO, Makine Prg., Bursa, Türkiye Uludağ Üniversitesi Orhangazi YAÇMYO, Gaz ve Tesisatı Tekn.Prg., Bursa, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2
Özet Sürdürülebilir bir gelecek için, endüstriyel ya da domestik uygulamalarda ihtiyaç duyulan enerjinin, temiz ve yenilenebilir enerji kaynakları aracılığı ile sağlanması şüphesiz kaçınılmazdır. Bu nedenle soğutma uygulamalarında, güneş enerjisi kaynaklı soğurmalı soğutma sistemlerinin kullanımı, enerji kullanımı ile ilintili ekonomik, ekolojik ve sosyal sorunlar için önemli alternatif çözümler sunmaktadır. Bu çalışmada güneş enerjisi kaynaklı resorbsiyonlu soğutma sistemleri ile soğutma uygulamaları tanıtılarak, sistemin çalışma özellikleri ve kullanımı ile sağladığı faydalar, alternatifleri ile karşılaştırmalı olarak incelenmiştir. Resorbsiyonlu soğutma sistemleri, sahip oldukları teknik üstünlükler nedeni ile güneş enerjisi kaynaklı soğutma uygulamalarında teknoekonomik açıdan alternatiflerine göre daha avantajlıdırlar. Soğutucu akışkan olarak amonyak-su eriyiği kullanan resorpsiyonlu sistemde çalışma basınçları ve sistemi besleyen ısıl enerji kaynağının sıcaklık değeri, geleneksel amonyak eriyikli absorbsiyonlu sisteme göre daha düşük seviyelerde olmakta, bu nedenle daha güvenli ve daha ekonomik soğutma uygulamalarının oluşturulması mümkün olmaktadır. Ayrıca resorbsiyonlu soğutma sistemleri ile 0 C’nın altında soğutma uygulamaları gerçekleştirmek mümkündür. Buzda enerji depolama ünitelerinin entegre edildiği resorbsiyonlu soğutma sistemi ile, soğutma enerjisinin buzda depolanması sağlanarak, güneş enerjisinin elde edilemediği ya da yetersiz olduğu zamanlarda da soğutma ihtiyacı kesintisiz şekilde karşılanabilmektedir. Güneş enerjisi kaynaklı resorbsiyonlu soğutma sistemleri ile dışa bağımlı olmayan, tamamen temiz ve yenilenebilir bir enerji kaynağı kullanılarak, daha düşük maliyetli ve daha uygulanabilir projelerin hayata geçirilmesi mümkün olmaktadır. Anahtar kelimeler: Güneş Enerjisi, Resorbsiyon, Soğutma.
162
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Cold Storage Applications with Solar Resorption Cooling Systems Bilsay PASTAKKAYA1,*, Kürşat ÜNLÜ 2 1
2
Uludag University Orhangazi YACVC Mech. Dept. Bursa, Turkiye Uludag University Orhangazi YACVC Gas and Ins. Tech. Dept. Bursa, Turkiye *Responsible author e-mail:
[email protected]
Abstract Obviously, it is inevitable to provide energy requirement for industrial and domestic applications, from clean and renewable energy sources for a sustainable future. Thus, significant alternative solutions for economic, ecologic and social issues related to the energy use are provided by using solar powered sorption cooling systems. In this article, cooling applications with solar resorption systems were introduced, and technical features and the benefits of the resorption system were investigated compared to its alternatives. Thanks to its technical supremacy, resorption cooling system is more advantageous than its alternatives for solar cooling applications in techno-economic aspects. Resorption cooling system with ammonia-water solution has lower working pressure and lower temperature of the heat source, than conventional ammonia based absorption system, therefore it enables to set up, safer and economic cooling applications. Moreover, it is possible to actualize cooling application below 0 C. Resorption cooling systems, integrated with ice storage units, are able to provide cooling demand continuously by storing the cooling energy in ice form, when the solar energy is insufficient or absent. Solar resorption cooling systems enable to realize more feasible projects with lower costs, by using independent, totally clean and renewable energy source. Key words: Solar Energy, Resorption, Cooling.
163
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürdürülebilirlik Etiği: Çevre-merkezci Etik Yaklaşım Kıvılcım Akkoyunlu Ertan1,*, Birol Ertan2 1
Türkiye ve Ortadoğu Amme İdaresi Enstitüsü (TODAİE), Türkiye 2 Rumeli Üniversitesi, İstanbul, Türkiye * Sorumlu yazar e-posta:
[email protected]
Özet Çevre ve insan arasındaki ilişkiler, insanın çevreye yönelik tavır, davranış ve düşünceleri çerçevesinde belirlenmiştir. Çevre sorunlarının insanın ve diğer canlıların sağlığını tehdit etmesi ve ekolojik dengeyi bozması sonucu çevreye yönelik duyarlılık da gelişmeye başlamıştır. Çevre duyarlılığıyla birlikte, çevre etiği yaklaşımlarının da gelişmesine tanık oluyoruz. İlk aşamada çevreye yönelik davranışlarımızın duygularımızı ve düşüncelerimizi belirleyen etik yaklaşım “insan-merkezci etik” ortaya çıkmıştır. İnsanmerkezci etik yaklaşımda çevre sorunlarının bireyi, toplumu ve bütün olarak insanlığı tehdit ettiği bu nedenle de çevre korumak düşüncesinin gerektiği anlayışı egemendir. Etik ilgi alanının genişlemesi sonucunda ikinci tür etik yaklaşım ortaya çıkar ve çevreye yalnızca insanlar için değil hayvanlar ve bitkileri de içeren (Dünya gezegenindeki yaşamı kapsayacak biçimde) bütün canlılar için koruma düşüncesi belirir. İkinci tür etik yaklaşım bütün canlıları koruma düşüncesinden hareket ettiği için “canlı-merkezci etik” olarak isimlendirilmiştir. Geçtiğimiz yüzyılın sonlarına ve 21. Yüzyıla egemen olan çevre etiği yaklaşımı ise “çevre-merkezci etik olarak isimlendirilmekte ve çevrenin korunması gerektiği düşüncesini ortaya koymaktadır. Çevre-merkezci etik yaklaşım; bütün canlı ve cansız varlıkların korunması, çevrenin ekolojik bütünlüğünün korunmasını da içerdiği için bütüncüllük (holizm) ve sürdürülebilirlik ilkelerini temel almaktadır. Bu çerçevede yeni yüzyılın etik yaklaşımı, sürdürülebilir çevre etiği olarak çevre-merkezci etik yaklaşım olmak durumundadır. Anahtar kelimeler: Sürdürülebilirlik, etik, çevre etiği, çevre-merkezci etik.
164
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sustainability Ethics: Eco-centric Ethical Approach Kıvılcım Akkoyunlu Ertan1,*, Birol Ertan2 1
Türkiye ve Ortadoğu Amme İdaresi Enstitüsü (TODAİE), Türkiye 2 Rumeli Üniversitesi, İstanbul, Türkiye *Sorumlu yazar e-posta:
[email protected]
Abstract The relationship between the environment and people is determined within the framework of the attitude, behaviour and thoughts of the person towards the environment. Environmental problems threaten the health of human beings and other living things, and the ecological balance has deteriorated and the sensitivity towards the environment has also begun to develop. Together with environmental awareness, we are witnessing the development of environmental ethics approaches. At the first stage, the ethical approach to our emotions and our thoughts about our behaviour towards the environment has emerged as "antropocentric ethics". Because of the antropocentric ethical approach, environmental problems threaten the individual, society, humanity and the Earth planet as a whole. As a result of the expansion of ethical interest, a second type of ethical approach emerges, and the conservation for all living things, including animals and plants, not only for humans but also for the environment (for the life at Earth), is manifested. The second type of ethical approach has been called "bio-centric ethics" which grows out of an idea of preservation of all living beings. The approach of environmental ethics, which dominated the end of the century and the beginning of the 21st century, is called "eco-centric ethics" and emphasizes that the environment should be protected. Eco-centric ethical approach; is based on the principles of holism and sustainability, since it includes the protection of all living and non-living beings (also future generations) and the preservation of ecological integrity of the periphery. The ethical approach of the new century in this framework is to be an eco-centric ethical approach as sustainable environmental ethics. Key words: Sustainability, ethics, environmental ethics, eco-centric ethics.
165
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Atık Kurşun Malzemesinin Gaz Atomizasyonu ile Geri Dönüşümü ve Sürdürülebilirlik İçin Toz Metalurijisi Yöntemiyle Fittings Malzemesi Üretimi Özkan KÜÇÜK1, Burak ÖZTÜRK2,*, M. Fatih KILIÇARSLAN1 1
Kastamonu Üniversitesi, Malzeme Bilimi ve Nanoteknoloji Mühendisliği, Kastamonu, Türkiye 2 Kastamonu Üniversitesi, Malzeme Bilimi ve Mühendisliği, Kastamonu, Türkiye *Sorumlu yazar e-posta:
[email protected]
Özet Kurşun yumuşak, ağır ve kolay dövülebilen bir malzemedir. X ışınlarından koruma özelliği olduğu için tuğla üretimi ile nükleer tıp ve onkoloji ünitelerinde, kurşun kapılar röntgen odalarında, aşınma ve korozyon özellikleri iyi olduğu için levha halinde çatı oluklarında, su borularında, çatı kaplamalarında, kablo izolasyonu başta olmak üzer bir çok farklı alanda kullanımı yaygındır. Kurşun malzemesi doğada yer alan bir çok ağır metallerden birisidir. Geri dönüşümü yapılmayarak çevreye bırakılan atık kurşun insan ve çevreye çok fazla zarar vermektedir. Bu çalışmada atık halde bulunan kurşun geliştirilen bir soğuk nozzle gaz atomizasyon kulesi ile hava yardımıyla soğutularak 20 -150 mikron aralığında toza dönüştürülmüştür. Üretimi yapılan bu toz malzemeler kullanım alanlarını artırmak, mekanik özelliklerini geliştirmek ve sürdürülebilirliğini iyileştirmek için atık boru bağlantılarında kullanılmak üzere, aşınma ve korozyon direnci dikkate alınarak TS 11 EN 10242 standartlarına göre 3/4 - 1/2 '' bir boru bağlantı elemanı (fittings) olarak üretilmiştir. Bu ürünün toz metalurijisi ile üretilebilmesi için çift yönlü sıkıştırma yapabilen özel bir toz presleme kalıbı imalatı yapılmıştır. Tozun ve preslenmiş malzemenin mikroyapı görüntüleri optik mikroskop yardımıyla incelenmiştir. Bu çalışma ile erime derecesi düşük olan bütün tüm atık metal malzemelerin geri dönüşümü ve sürdürebilirliği için bir referans kaynak oluşturulmuştur. Anahtar kelimeler: Toz Metalurjisi, Gaz Atomizasyonu, Geri Dönüşüm, Fittings.
166
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Recycling of Waste Lead Alloy by Gas Atomization and Production of Fittings Material by Powder Metallurgy for Sustainability Özkan KÜÇÜK1, Burak ÖZTÜRK2,*, M. Fatih KILIÇARSLAN1 1
I Kastamonu University, Materials Science and Nanotechnology Engineering, Kastamonu, Turkey 2 Kastamonu Üniversitesi, Malzeme Bilimi ve Mühendisliği, Kastamonu, Türkiye *Responsible author e-mail:
[email protected]
Abstract Lead is a soft, heavy and easily beaten material. Because of its X-ray protection properties, it is common to use brick production, nuclear medicine and oncology units, lead gates in x-ray rooms, roofing gutters, water pipes, roof coverings and cable insulation. Bullet material is one of the many heavy metals found in nature. The waste lead that is left without being recycled causes too much damage to people and the environment. In this study, waste which is in waste form is cooled with air with a developed cold nozzle gas atomization tower and transformed into 20 to 150 microns. In order to increase the usage areas of the produced dust materials, to improve the mechanical properties and to improve the sustainability, 3/4 - 1/2 "pipe fittings according to TS 11 EN 10242 standards, taking into consideration the corrosion and corrosion resistance. In order to produce this product with powder metallurgy, a special powder pressing mold capable of two-sided compression has been manufactured. The microstructure images of the powder and pressed material were examined with an optical microscope. This work establishes a reference source for the recycling and sustainability of all waste metal materials with a low melting point. Key words: Powder Metallurgy, Gas Atomization, Recycling, Fittings.
167
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Gaz Atomizasyonu için Ark Yöntemi Kullanılarak Yeni Bir Tasarıma Sahip Sıcak Nozzle Geliştirilmesiyle Al 5083 Tozu ve Kompozit Fittings Malzemesi Üretimi Özkan KÜÇÜK1, Burak ÖZTÜRK2,*, M. Fatih KILIÇARSLAN1 1
Kastamonu Üniversitesi, Malzeme Bilimi ve Nanoteknoloji Mühendisliği, Kastamonu, Türkiye 2 Kastamonu Üniversitesi, Malzeme Bilimi ve Mühendisliği, Kastamonu, Türkiye *Sorumlu yazar e-posta:
[email protected]
Özet Toz metalurjisi yöntemi; havacılık, savunma otomotiv ve imalat sektörü başta olmak üzere endüstride yaygın olarak kullanılmaktadır. Ülkemizde metal tozu üretimi yok denecek kadar az olup yurt dışından ithalat yapılarak temin edilmektedir ve maliyetleri çok yüksektir. Erime sıcaklığı yüksek olan metallerin gaz atomizasyonu sıcak besleme nozzlelar yardımıyla yapılmaktadır. Bu nozzle sistemleri indüksiyon ve yüksek sıcaklığa dayanıklı teller başta olmak üzere farklı tip ürünlerden meydana gelmektedir. Bu çalışmada erime sıcaklığı yüksek olan metallerin geri dönüşümü için üretimi kolay, maliyetleri düşük, verimliliği yüksek, elektrik ark yöntemi ile sıcak besleme yapan, yeni bir tip nozzle endüstriyel tasarımı geliştirilmiştir. Geliştirilen bu nozzle ile hurda Al 5083 malzemesinden 20-100 mikron kalınlığında toz elde edilmiştir. Bu toz 6061 malzemesinden döküm yolu ile üretilen boru bağlantı malzemesine (fittings) katılmıştır. Diş açma işlemi CNC freze tezgahında saf 6061 ve %12 5083 Al tozu takviyeli kompozit fittings malzemeleri için karşılaştırmalı olarak farklı devir sayılarında yapılmıştır. Enerji tüketimi akım trafosu ve ampermetreler yardım ile ölçülerek özel enerji tüketimi hesaplanmıştır (SEC-Specific Energy Consuption). Üretilen tozların talaşlı imalatta enerji tüketimine olumlu yönde etki gösterdiği gözlemlenmiştir. Ürünlerin mikroyapı ve sertlik değişimleri incelenmiştir. Sürdürebilirlik ve üretimde enerji tüketimi verimliliğini artırmak için optimum imalat koşulları belirlenmiştir. Geliştirilen bu yeni tip nozzle endüstriyel tasarım patenti yardımı ile koruma altına alınmıştır. Anahtar kelimeler: Toz Metalurjisi, Elektrik Ark Yöntemi, Kompozit Fittings, Enerji Tüketimi.
168
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Al 5083 Powder and Composite Fittings Material Production by Developing Hot Nozzle with a New Design Using Arc Method for Gas Atomization Özkan KÜÇÜK1, Burak ÖZTÜRK2,*, M. Fatih KILIÇARSLAN1 1
Kastamonu University, Materials Science and Nanotechnology Engineering, Kastamonu, Turkey 2 Kastamonu University, Materials Science and Engineering, Kastamonu, Turkey * Responsible author e-mail:
[email protected]
Abstract The powder metallurgy method is widely used in the industry, especially in the aviation, defense, automotive and manufacturing sectors. In our country, the production of metal powder is not enough to be tried and it is supplied by importing from abroad and its costs are very high. Gas atomization of metals with high melting temperature is carried out by means of hot feed nozzles. These nozzle systems come from different types of products, especially induction and high temperature resistant wires. In this work, a new type of nozzle industrial design has been developed for the recycling of metals with high melting temperature, which is easy to produce, low cost, high efficiency, hot-feeding by electric arc method. With this nozzle developed, 20-100 micron thick powder was obtained from scrap Al 5083 material. This powder was added to pipe fittings produced by casting from 6061 material. The threading process was performed at CNC milling machine with comparatively different speed numbers for pure 6061 and 12% 5083 Al powder reinforced composite fittings. Energy consumption is measured by current traps and ammeters and special energy consumption is calculated (SEC-Specific Energy Consuption). It has been observed that the powders produced have a positive effect on the energy consumption in the machining. Microstructure and hardness changes of the products were investigated. Optimum manufacturing conditions have been determined to increase sustainability and energy consumption efficiency in production. This new type of nozzle developed is protected by the industrial design patent aid. Key words: Powder Metallurgy, Electric Arc Method, Composite Fittings, Energy Consumption.
169
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Release of 5-Fluorouracil from Natural Polymeric Membranes as Controlled Drug Delivery Burcu ALA1,*, Gülsen ASMAN2, Ebru KONDOLOT SOLAK3 1,2
Gazi University, Faculty of Science, Department of Chemistry, Ankara,Turkey Gazi University, Technical Sciences Vocational School, Department of Chemistry and Chemical Processing Technologies, Ankara-Turkey *Responsible author e-mail:
[email protected] 3
Abstract Natural polymers have received more attention in the field of controlled drug delivery studies. The corn starch is one of the natural polymer that can be used as membrane material. The 5-fluorouracil (5-FU) is one of the most commonly used anticancer drug and used in the chemotherapy of human cancers. It has several uncomfortable side effects. To avoid possibly undesirable effects, such as toxicity it can be applied in a controlled manner. In this study a natural polymer corn starch was used as a membrane material and transdermal release system was planned for 5-FU. However, for the preparation of the membranes a supporting material was required. Poly(vinyl alcohol) (PVA) which is a biocompatible and water soluble polymer, was preferred as a supporting material in the study. The effect of membrane thickness and starch/PVA ratio on the released amount of 5-FU was studied at 321°C and pH of 7.4. The effect of temperature was also studied to obtain the release profiles of the starch/PVA blend membranes for the skin, normal body and fewer body temperatures. Increase in membrane thickness decreased the released amount of drug and temperature was found as directly proportional with the released amount of drug. The effect of pH on the released amount of 5-FU was also studied. Key words: 5-fluorouracil, controlled release, natural polymers, transdermal.
170
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Küresel Isınma ve İklim Değişiminin Orta Anadolu Bölgesinde İncelenmesi Burhan DAVARCIOĞLU1,*, Alpgiray LELİK2 Aksaray Üniversitesi, Aksaray, Türkiye 2 Ankara Üniversitesi, Ankara, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
Özet İklim, belirli bir bölge içinde ve uzun yıllar değişmeyen ortalama hava koşullarıdır. Yapılan çalışmalarda dünyanın yakın gelecekte daha sıcak ve kurak, yağış miktarı ve şiddeti açısından da daha belirsiz bir iklim yapısına sahip olacağı ifade edilmektedir. Hava sıcaklığındaki bu yükselmenin dünya üzerinde ciddi bir iklim değişikliğine yol açacağı tahmin edilmektedir. Küresel ısınmaya bağlı iklim değişikliği, doğal dengenin bozulmasına yol açarak insan sağlığını, sosyo-ekonomik sektörleri ve ekolojik sistemleri doğrudan ya da dolaylı olarak önemli oranda etkileyecektir. Küresel ısınmanın önüne geçebilmek için; enerji, sanayi, ulaşım ve tarım sektörlerinde, başta fosil yakıt kullanımının azaltılması yoluyla, gerekli politika değişikliklerine gidilerek sera gazı üretiminin sınırlandırılması sağlanabilir. Yenilenebilir enerji kaynaklarının kullanılmasının artırılması hava, toprak, su gibi doğal dengenin korunması ve sürdürülebilirliğin sağlanması açısından yarar sağlayacağı gibi ormanların korunması, bilinçli tarımsal uygulamalar sera gazları salınımının azaltılması için yardımcı olabilir. Toprak/toprak bozulması ve doğal kaynakların bozulması çölleşme kavramına dahil edilmelidir. İklim değişikliği günümüzde açık bir şekilde milli ekonomileri sarsmakta, yaşamları etkilemede, insanlara, toplumlara ve ülkelere ekonomik yük getirmektedir. Türkiye, dünyada kısa veya uzun süreli iklim değişikliklerinin yaşanabileceği hassas ülkelerden biridir. Bu çalışmada, Orta Anadolu bölgesindeki küresel ısınma ve iklim değişimi incelenmiştir. Küresel ısınmanın son bulmayacağı, sadece farklı şekillerde ortaya çıkabileceği görülmektedir. Anahtar kelimeler: Küresel ısınma, İklim değişikliği, Yenilenebilir enerji, Çölleşme, Orta Anadolu.
171
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
A Study of Global Warming and Climate Change in the Central Anatolian Region-Turkey Burhan DAVARCIOĞLU1,*, Alpgiray LELİK2 1
Aksaray University, Aksaray, Turkey 2 Ankara University, Ankara, Turkey *Responsible author e-mail:
[email protected]
Abstract Climate is the average weather conditions experienced in a particular place over a long period. It is stated that the studies will make the world warmer and drier in the near future, and will have a more uncertain climate structure in terms of rainfall amount and intensity. It is guessed that the increase of the weather warmth will be the cause of a great change of the world climate. Another guess about it is, the climactic change as the result of the global warming will affect human health, socio-economic sectors and the ecologic system by the collapse of natural balance, directly or indirectly and will create important problems. It may be a help to reduce the use of fossil coal in the energy, industry, transportation and agriculture and necessary precautions may be taken about that to be able to provide this in energy sector renewable energy sources may be found and enough works on this may be done. The increase of the use of renewable energy resources may be good for the sustainable and also for the protection of natural balance such as water and weather and besides this the protection of forests, the conscious agricultural studies may be helpful for the decrease of the gases. Land/soil degradation and natural resources degradation should be included in the concept of desertification. Climate change is disrupting national economies and affecting lives, costing people, communities and countries clearly today. Turkey is one of the sensitive areas to climate variation in the world. In this study, investigation of global warming and climate change in the Central Anatolian region-Turkey. Global warming has not stopped, it is merely manifested in different ways. Key words: Global warming, Climate change, Renewable energy, Desertification, Central Anatolian.
172
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sanayide İklim Değişikliğine Uyum ve Eko-Verimlilik (Temiz Üretim) Programı: Örnek Uygulamalar Burhan DAVARCIOĞLU1,*, Alpgiray LELİK2 Aksaray Üniversitesi, Aksaray, Türkiye 2 Ankara Üniversitesi, Ankara, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
Özet İklim, canlıların yaşam alanlarını ve özelliklerini belirleyen en önemli unsur olmakla birlikte insanlığın tüm yaşam ihtiyaçlarını karşılayan bir kaynaktır. İklim değişikliği, çok ciddi çevresel ve sosyo-ekonomik sonuçlara yol açabilecek çok yönlü ve küresel bir sorun olarak karşımıza çıkmaktadır. İklim değişikliği ile ilgili yapılan uluslararası ve ulusal düzenlemeler sanayide büyük bir dönüşüm sürecini başlatmıştır. Sanayi sektörü küresel emisyonların büyük bir kısmına neden olmaktadır. Sanayide son dönemde eko-verimlilik (temiz üretim), çevre dostu teknolojiler ve endüstriyel ekoloji gibi yeni kavramlar ortaya çıkmış ve mevcut potansiyelin en iyi şekilde kullanılması gerekliliği hem çevre kalitesi hem de üretimin sürdürülebilirliği açısından zorunlu hale gelmiştir. Sanayide iklim değişikliğine uyum nedeniyle ortaya çıkması beklenen, doğrudan üretimi ve rekabet gücünü olumsuz yönde etkileyecek unsurlara karşı önlemlerin alınması gereklidir. İklim değişikliği etkilerinin yönetiminde sanayi açısından en önemli yöntem olarak görülen çevre teknolojilerinin kullanımının işletme için önemli bir rekabet avantajı sağlayabileceği görülmektedir. Ekolojik dengenin korunması ve insan topluluklarının sürdürülebilir gelişiminin sağlanması için, su kaynaklarının bugün ve gelecekteki gereksinimleri karşılayabilecek şekilde kullanılması gerekmektedir. Pilot projeler kapsamında 6 sanayi tesisinde üretim süreçleri, su tüketimleri ve atıksu miktar ve özellikleri değerlendirilerek ilgili firmaların çevresel ve ekonomik performanslarını belirgin şekilde artıracak temiz üretim uygulamaları hayata geçirilmiştir. Anahtar kelimeler: Eko-verimlilik (Temiz üretim), İklim değişikliği, Endüstriyel simbiyoz, Sera etkisi, Küresel ısınma, Sürdürülebilir üretim.
173
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Adaptation to Climate Change and Eco-Efficiency (Cleaner Production) Programme in Industry: Best Practices Burhan DAVARCIOĞLU1,*, Alpgiray LELİK2 1
Aksaray University, Aksaray, Turkey 2 Ankara University, Ankara, Turkey *Responsible author e-mail:
[email protected]
Abstract Climate is the source that meets all living needs for mankind, with being the most important element that determines the living area and characteristics of living things. Climate change emerges as a multifaceted global problem those results in serious environmental and socio-economic consequences. National and international regulations on climate change initiated immense revolution process in industry. Manufacturing sector causes majority of the global emissions. Lately, new concepts emerged in manufacturing business including eco-efficiency (cleaner production), environmentally friendly technologies, and industrial ecology and thus essentiality of more efficient use of available potentials became imperious both for environmental quality and sustainability of production. It is imperative to take precautions against elements and factors that will have direct adverse effect on production and competitiveness due to the imposed adaptation to the climate change. It appears that the use of environmentally friendly technologies which is considered to be the most vital method in management of effects resulted by the climate change could deliver substantial advantage for the corporation. To conserve ecological balance and ensure the sustainable development of human communities, water resources need to be used to meet today's and future needs. As the demonstration projects, cleaner production applications which improves environmental and economical performance were implemented in 6 industrial facilities analyzing production processes, water consumption and wastewater generation. Key words: Eco-efficiency (Cleaner production), Climate change, Industrial symbiosis, Greenhouse effect, Global warming, Sustainable production.
174
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Aminoketooksim Bileşiklerinin Sıvı-Sıvı Ekstraksiyon ve Boya Renk Giderim Özelliklerinin İncelenmesi Bülent DEDE2,*, Güvenç GÖRGÜLÜ1, Betül ULU2 Mehmet Akif Ersoy Üniversitesi, Eğitim Fakültesi, Fen Bilgisi Eğitimi, Burdur, Türkiye Süleyman Demirel Üniversitesi, Fen Edebiyat Fakültesi Kimya Bölümü, Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected]
1 2
Özet Pb(II), Cd(II) ve Hg(II) gibi geçiş metal iyonları oldukça toksik olduğu için çevre sularında veya topraklarda bulunmaları istenmemektedir. Bu metaller çevrede birikebilir ve bitki ve hayvanlarda çok düşük konsantrasyonlarda bile toksik etkilere neden olabilirler. Öte yandan, Co(II), Ni(II), Cu(II) ve Zn(II) gibi bazı geçiş metalleri biyolojik önem taşımaktadır ve bu elementleri içeren çok sayıda metaloenzim bulunmaktadır. Bu elementler aynı zamanda yüksek konsantrasyonlarda canlılarda toksik etkilere neden olurlar. Bu nedenle, potansiyel sağlık ve ekolojik tehlikeler nedeniyle bu eser metallerin ayrıştırılması hayati öneme sahiptir. Eser miktarlarının ayrıştırılması ve önderiştirilmesi için en yaygın kullanılan teknikler ekstraksiyon, çöktürme ve şelatlama reçineleridir. Birçok sanayi kuruluşu, boyaları, fenol ve türevleri, böcek öldürücüleri ve diğer organik kirleticileri içeren büyük miktarda atık suyunu boşaltmaktadır. Birçok toksik organik bileşik biyorefrakter olduğundan, geleneksel biyolojik arıtma bu tür atık su için etkisizdir. Adsorpsiyon, koagülasyon ve membran ayırma gibi bazı fizikokimyasal teknolojiler, kirleticileri sadece bir ortamdan diğerine aktararak daha ileri uygulamaları gerektirir. Organik kirleticilerin suya, karbondioksit ve diğer zararsız küçük moleküllere oksidasyonunu amaçlayan ileri oksidasyon işlemleri atık su arıtımında, özellikle de biyorefrakter kirleticiler için giderek daha önemli teknolojiler haline gelmektedir. Bu çalışmada öncelikle bazı geçiş metal katyonlarının [Mn(II), Co(II), Ni(II), Cu(II), Zn(II), Pb(II), Cd(II), Hg(II)] sulu fazdan organik faza ekstraksiyonu, aminoketooksim ligandı kullanılarak gerçekleştirilmiştir. Ligandın sulu fazdan organik faza olan sıvı-sıvı ekstraksiyonu sonucunda Cu(II) ve Hg(II) katyonlarının ekstraksiyonunda etkili bir şekilde kullanılabileceği tespit edilmiştir. Ayrıca metilen mavisi boyasının sulu ortamdan uzaklaştırılmasında ligandın Cu(II) kompleksinin etkinliği de araştırılmıştır. Yapılan çalışmalara göre ligandın Cu(II) kompleksinin sulu ortamdan oldukça iyi düzeyde boya uzaklaştırdığı belirlenmiştir. Anahtar kelimeler: Oksim, sıvı-sıvı ekstraksiyon, metal uzaklaştırma, boya renk giderimi.
175
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Investigation of Liquid-Liquid Extraction and Dye Decolorization Properties of Aminoketooxime Compounds Bülent DEDE2,*, Güvenç GÖRGÜLÜ1, Betül ULU2 1
Mehmet Akif Ersoy University, Faculty of Education, Department of Science Education, Burdur, Turkey Süleyman Demirel University, Faculty of Sciences and Arts, Department of Chemistry, Isparta, Turkey *Responsible author e-mail:
[email protected]
2
Abstract Transition metal ions such as Pb(II), Cd(II) and Hg(II) are recognized as highly toxic, which makes their presence in environmental waters or soils undesirable. These metals can accumulate in the environment and produce toxic effects in plants and animals even at very low concentrations. On the other hand some transition metals such as Co(II), Ni(II), Cu(II) and Zn(II) are bioessential and there are numerous metalloenzymes containing these elements. However, these elements also produce toxic effects in living things at high concentrations. Therefore, separation of these trace metals is vital due to the potential health and ecological hazard. The most widely used techniques for the separation and preconcentration of trace amounts are extraction, precipitation and chelating resins. Many industries discharge a large quantity of wastewater containing dyes, phenol and its derivatives, pesticides, and other organic pollutants. Because many toxic organic compounds are biorefractory, conventional biological treatment is ineffective for these kinds of wastewater. Some physicochemical technologies, such as adsorption, coagulation, and membrane separation, merely transfer pollutants from one medium to another requiring further treatment. Advanced oxidation processes, aiming to complete oxidation of organic pollutants to water, carbon dioxide, and other harmless small molecules, are becoming more and more important technologies for wastewater treatment, especially for biorefractory contaminants. In this study firstly liquid–liquid extraction of various transition metal cations [Mn(II), Co(II), Ni(II), Cu(II), Zn(II), Pb(II), Cd(II), Hg(II)] from the aqueous phase to the organic phase was carried out using aminoketooxime ligand. It was concluded that the ligand can effectively be used in solvent extraction of Cu(II) and Hg(II) from the aqueous phase to the organic phase. Furthermore effectiveness of the Cu(II) complex of the ligand in removing methylene blue dye from aqueous media was investigated. According to the studies made, it was determined that the Cu(II) complex of the ligand removed the dye well from the aqueous medium. Key words: Oxime, liquid-liquid extraction, metal removal, dye decolorization.
176
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Katı Oksit Yakıt Pillerinde Kullanılmak Üzere Hidrotermal Olarak Kompozit Elektrolit Sentezi ve Elektrokimyasal Karakterizasyonu Bülent DEDE1,*, Mehmet YÖRÜK1 1
Süleyman Demirel Üniversitesi, Fen Edebiyat Fakültesi Kimya Bölümü, Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected]
Özet Dünya sanayileşmesinin gelecekte de devamı için ana faktör yeterli enerji kaynaklarının varlığıdır. Fosil yakıtları halen kullanılmakta olan mevcut yakıt kaynakları olup, oldukça sınırlıdırlar. Ayrıca fosil yakıtların kullanımı ile ortaya çıkan asit yağmurları, küresel ısınma gibi ciddi çevre problemleri bilim adamlarını fosil yakıtlarına alternatif madde arayışına sevk etmektedir. Bu nedenle, enerji üretiminde, kimyasal enerjinin direkt olarak elektrik enerjisine çevrilmesi oldukça önemli bir araştırma alanı haline gelmiştir. Yakıt Pilleri yaygın bir yakıtın kimyasal enerjisini direkt olarak düşük voltajlı doğru akımlı elektrik enerjisine çeviren aletler olup, mevcut termomekanik elektrik üretim metotlarına kıyasla çok daha yüksek verimlilikle çalışırlar. Farklı yakıt pilleri mevcut olup, Katı Oksit Yakıt Pilleri (Solid Oxide Fuel Cells, “SOFC”) hidrokarbon yakıtlardan elektrik üretiminde en çok kullanılan yakıt pili çeşididir. Bunun en önemli nedeni pilin çalışma sıcaklığının oldukça yüksek (800-1000°C) olması neticesinde yüksek verimlilik elde edilebilmesidir. Ayrıca diğer yakıt pillerine göre daha basit bir yapısı vardır ve safsızlıklara karşı daha fazla tolerans gösterir. Ayrıca yakıt olarak sadece hidrojenle sınırlı olmayıp değişik hidrokarbonları da kullanabilir. Bir diğer üstünlüğü de en azından kısmi olarak hidrokarbon yakıtların pil bünyesinde reformunu sağlayabilmesidir. Bu çalışmada SOFC için SNDC/karbonat kompozit elektrolitleri sentezlenmiştir. Nano boyutlu SNDC tozlarının sentezi hidrotermal metot ile gerçekleştirilmiştir. Sentezlenen elektrolitler yapısal ve elektrokimyasal olarak X-ray difraksiyonu, SEM, EDX, TG-DTA ve İmpedans spektroskopisi ile karakterize edilmiştir. Kompozit elektrolit, SNDC ile karşılaştırıldığında daha yüksek iyonik iletkenliğe sahip olduğu gözlenmiştir. Anahtar kelimeler: Yakıt pilleri, katı oksit yakıt pili, kompozit elektrolitler, hidrotermal sentez.
177
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Hydrothermal Composite Electrolyte Synthesis and Electrochemical Characterization for Use in Solid Oxide Fuel Cells Bülent DEDE1,*Mehmet YÖRÜK1 1
Süleyman Demirel University, Faculty of Sciences and Arts, Department of Chemistry, Isparta, Turkey *Responsible author e-mail:
[email protected]
Abstract The existence of sufficient energy resources is the key factor for the future development of the industrialized world. Conventional energy supplies are still fossil fuels and these supplies are limited. In addition, severe environmental problems including acid rain and global warming caused by the use of fossil fuels leads scientists to investigate alternative materials to fossil fuels. Therefore, the direct conversion of chemical energy into electrical energy for power generation represents a major research area. A fuel cell is an electrochemical device in which the chemical energy of a conventional fuel is converted directly into low-voltage direct-current electrical energy and works with a much higher efficiencies than conventional thermomechanical methods. There are different kinds of fuel cells and among them, Solid Oxide Fuel Cells (SOFC) are the most commonly used fuel cells for the generation of electricity from hydrocarbon fuels. This is due to its high efficiency because of its high operation temperature (800-1000°C). In addition, it has simpler structure compared to other fuel cell kinds and it shows more tolerance to the impurities. In addition, it is not limited with the use of hydrogen as a fuel and it can use other hydrocarbons. An external reformer is not required to produce hydrogen gas because SOFC can at least partially reform the hydrocarbon fuels into hydrogen inside the cell. In this study nano-sized SNDC/carbonate composite electrolytes with different morphologies have been synthesized by hydrothermal method. The characterization of synthesized electrolytes has been made by X-ray diffraction, SEM, EDX, TG-DTA and Impedance spectroscopy. Composite electrolytes have higher ionic conductivity in compared to SNDC. Key words: Fuel cell, solid oxide fuel cell, composite electrolytes, hydrothermal synthesis.
178
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Emission Of Greenhouse Gases From Machinery Usage In Agricultural Production Over Turkey Can ERTEKİN1,*, Fatih EVRENDİLEK 2, Beran ADAY 1 1
Akdeniz University, Faculty of Agriculture, Dept. of Farm Machinery and Technologies Engineering, Antalya, TURKEY 2 Abant Izzet Baysal University, Faculty of Engineering, Dept. of Environmental Engineering, Bolu, TURKEY *Responsible author e-mail:
[email protected]
Abstract The importance of using machinery in agriculture is getting more and more important day by day. The use of machines in agricultural production provides advantages in terms of energy saving, time saving and productivity increase. In this study, 27 agricultural crops such as cereals, fruits, and vegetables were evaluated in terms of using agricultural machine energy during their production process including soil preparation, fertilization, sowing, spraying, harvesting and transportation, based on minimum and maximum values reported in related literature. Greenhouse gas (GHG) emissions resulting from the use of agricultural machinery energy can be expressed as total carbon dioxide equivalent (CO2eq emissions) (0.071 kg per MJ). A map showing the total CO2eq emissions emitted by agricultural machinery power in agricultural production. Our estimates showed that minimum and maximum GHG emissions varied between 0.0407 and 0.8502 Tg CO2eq for wheat, 7.85 and 35.22 Gg CO2eq for chickpea, and 0.05296 and 0.08569 Tg CO2eq for sunflowers, respectively. Key words: CO2 emission, greenhouse gases, agricultural production.
179
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Removal of Melamine from Milk by Polymeric Membrane Containing Carbon Nanotube Canan ONAC1,*, Ahmet KAYA 1, Mehmet Lutfi YOLA 2, H. Korkmaz ALPOGUZ1 1
Pamukkale University, Denizli, Turkey Iskenderun Technical University, Hatay, Turkey *Responsible author e-mail:
[email protected] 2
Abstract It was developed surface plasmon resonance process for the removal of melamine by using carbon nanotube inclusion polymeric membrane for the first time in the literature. It was prepared low- cost biosensor which allows determination of melamine by molecular imprinted polymeric films in one-step, selective and sensitive way. For this purpose it was developed molecular imprinted sensors intended for the determination of melamine from the milk sample. Melamine was removed from the milk sample with 82.87 % efficiency at the end of ten days. The determination of melamine was achieved with a high sensitive, selective and easy by preparing melamine printed polymer nanofilm layer on the surface of SPR's sensor chip. By using of a new generation carbon nanotubes membranes, it was developed nano-reinforced membranes with a high permeability and mechanical strength against to contamination and full-filled active layer of the membrane is minimized. Key words: Carbon nano-tube; melamine; polymeric membrane; surface plasmon resonance .
180
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Removal and Determination of Tobramicyn by SWV from milk through the rGO/PIM Canan ONAC1,*, Ahmet KAYA 1, Mehmet Lutfi YOLA 2, H. Korkmaz ALPOGUZ1 1
Pamukkale University, Denizli, Turkey Iskenderun Technical University, Hatay, Turkey *Responsible author e-mail:
[email protected] 2
Abstract In this work, polymer inclusion membrane was modified with reduced graphene oxide and used for the effective determination of tobramycin from milk samples by prepared molecular imprinted electrochemical sensor. Using of graphene oxide in the membrane filtration process as an additive material present great opportunities and possibilities to the membrane technology. The purpose of this study is improving the structural and mechanical features of polymeric membrane by adding reduced graphene oxide which has already had high mechanical and chemical properties for the separation process as well as developing a sustainable, selective and sensitive electrochemical sensor. For this purpose, it was provided the transport of tobramycin from the milk sample through the modified rGO/PIM. Tobramycin is transported by 80.08% RF from donor to the acceptor phase at the end of 10 days. Key words: Tobramycin, electrochemical sensor, polymer inclusion membrane, reduced graphene oxide, square wave voltammetry (SWV).
181
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürdürülebilir Kalkınma Modeli için Çevre Duyarlı Yapılarda Malzeme Seçiminin İncelenmesi Cansu GÜNER1,*, Fulya GÖKŞEN2, Ahmet KOÇHAN3 Nevşehir Hacı Bektaş Veli Üniversitesi, Nevşehir, Türkiye Kahramanmaraş Sütçü İmam Üniversitesi, Kahramanmaraş, Türkiye 3 Çukurova Üniversitesi, Adana, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2
Özet Enerji kavramı insan yaşamının temel gereksinimlerinden biridir. Ülkelerin sanayi devrimiyle ekonomik kalkınma yarışına girmeleri, teknolojik gelişmelerin hızla ilerlemesi ve artan nüfusla beraber enerjiye duyulan ihtiyaç da orantılı şekilde artmaktadır. Sanayi, konut, ulaştırma ve tarım sektörü gibi pek çok sektörde kullanılan enerji, yaşamın sürdürülebilirliği açısından da önem taşımaktadır. Gelişmişliğin göstergesi olarak kabul edilen enerjinin; üretim, çevrim, taşınım ve kullanım aşamalarında doğal çevre üzerinde oluşturduğu etki değerlendirilmesi gereken önemli bir konudur. Nüfus artışına, sanayileşmenin gelişimine paralel olarak kurulan büyük ölçekli enerji üretim ve çevrim stratejileri, ekolojik dengeyi büyük ölçüde etkilemektedir. Bunun sonucunda oluşan çevre sorunları hem ulusal hem de uluslararası düzeyde tartışılmaktadır. Binalar yaşam döngüleri boyunca harcadıkları enerjilerle oluşan kirlenmelerde ve enerji kaynaklarının tükenmesinde oldukça etkili olmaktadır. Tüketilmekte olan enerjinin %41.5’lik payının yapı sektörüne ait olması sürdürülebilir kalkınmanın ve sürdürülebilir mimarlığın gelecek nesiller için ne denli önemli olduğunu ortaya koymaktadır. Ekolojik mimarlığın yapının enerji gereksinimini en aza indirme çabası, tasarım kriterlerinin doğru uygulanması ve doğru malzeme seçimi ile sağlanmaktadır. Yapılarda, dayanıklılık ve diğer performanslardan ödün vermemek koşulu ile düşük enerjili malzemelerin tercih edilmesi çevresel bir yaklaşımdır. Yapı malzemelerinin enerji etkin olabilmesi için yaşam döngüsünün her aşamasında enerjiyi az ve verimli kullanması gerekmektedir. Hammaddesinin doğadan elde edilişinden başlayıp üretilmesi, taşınması, kullanılması ve geri dönüşüm aşamasına kadarki süreçte, enerjiyi etkin kullanan yapı malzemelerinin tercih edilmesi, yapılarda enerji verimliliğini arttırmaktadır. Nüfus artışı ve ekonomik büyüme ile artan enerji gereksinimi; yaşam standartlarını iyileştirme, ekonomik ve üretime dayalı etkinlikleri gerçekleştirebilme noktasında sürdürülebilir kalkınmanın temel girdisi olarak kabul edilmektedir. Enerji, sürdürülebilir kalkınmanın ekonomik, sosyal ve çevresel boyutunun tümü ile yakından ilgili bir unsurdur. Bu noktada bir disiplin olarak mimarinin sürdürülebilir kalkınma modeli için önemi, enerji etkin yapı malzemelerini kullanarak sağladığı enerji verimliliği ile ekonomiye, insan-insan ve insan-çevre ilişkisi ile de sosyal ve çevresel boyutuna sunduğu katkıdır. 182
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Yapılan bu çalışmada, mimari literatürde yer alan ekolojik ve sürdürülebilir yapılar araştırılıp, bu yapılarda kullanılan malzemeler yatay strüktür, düşey strüktür ve detay malzemeleri olarak gruplandırılmıştır. Gruplandırılan malzemelerin ekolojik ve sürdürülebilir yapı tasarımında tercih edilme nedenleri dikkate alınarak oluşturulan sonuç tablosunda etki dereceleri incelenmektedir. Çalışma sonucunda çevre duyarlı mimarinin sürdürülebilir kalkınma modeli için önemi elde edilen verilerle ortaya konmaktadır. Anahtar kelimeler: Ekolojik ve sürdürülebilir mimarlık, sürdürülebilir malzeme, sürdürülebilir kalkınma.
183
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Investigation of Material Selection on Environmentally Sensitive Buildings for Sustainable Development Model Cansu GÜNER1,*, Fulya GÖKŞEN2, Ahmet KOÇHAN3 Nevşehir Hacı Bektaş Veli University, Nevsehir, Turkey Kahramanmaraş Sütçü İmam University, Kahramanmaraş, Turkey 3 Çukurova University, Adana, Turkey 1
2
*Responsible author e-mail:
[email protected]
Abstract The concept of energy is one of the basic requirements of human life. The need for the countries to enter the industrial revolution and the economic development race, the technological developments to progress rapidly, and the increased population together with the need for energy are increasing proportionally. Energy used in many sectors such as industry, housing, transportation and agriculture is also important in terms of sustainability of life. Energy, which is regarded as a sign of your development; The impact on the natural environment in the stages of production, conversion, transport and use is an important consideration. The large-scale energy production and conversion strategies established in parallel with the population growth and the development of the industrialization, greatly influence the ecological balance. As a result, environmental problems are being discussed at both national and international level. Buildings are very effective in the pollution and energy depletion caused by the energy they spend throughout their lifecycle. The fact that 41.5% of the energy consumed belongs to the building sector reveals the importance of sustainable development and sustainable architecture for future generations. The effort of minimizing the energy requirement of ecological architecture is ensured by proper application of design criteria and proper material selection. The choice of low-energy materials is an environmental approach to avoiding concessions from durability and other performances. Building materials are required to use energy efficiently at every stage of the life cycle in order to be energy efficient. The choice of building materials that use energy efficiently increases the energy efficiency in the process, starting from the acquisition of the raw material, its production, transportation, use and recycling. Increasing energy demand with population growth and economic growth; It is accepted as the basic input of sustainable development at the point of improving living standards, economic and production based activities. Energy is closely related to the economic, social and environmental dimension of sustainable development. At this point, as a discipline, the importance of the architect's sustainable development model; Energy efficiency provided by energy-efficient building materials and economical, human-human and human–environment-related social and environmental dimension. 184
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
In this study, the ecological and sustainable structures in the architectural literature were investigated and the materials used in these structures were grouped as horizontal structure, vertical structure and detail materials. The effect grades of the grouped materials are examined in the result table, taking into consideration the reasons of preference in ecological and sustainable building design. As a result of the study, the benefits gained for the sustainable development model of environmentally conscious architect are revealed Key words: Ecological and sustainable architecture, sustainable material, sustainable development.
185
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Güneydoğu Anadolu Bölgesi’nin Yenilenebilir Enerji Kaynakları Bakımından Potansiyelinin Araştırılması Hakkı GÜLŞEN1, Celal ÇİFTÇİ2 Harran üniversitesi, Mühendislik Fakültesi, Çevre Mühendisliği, Şanlıurfa, Türkiye Harran üniversitesi, Mühendislik Fakültesi, Çevre Mühendisliği, Şanlıurfa, Türkiye *Sorumlu yazar e-posta:
[email protected]
1 2
Özet
Gelişmekte bir ülke olan Türkiye’nin de artan nüfus ve gelişen ekonomisine paralel olarak enerji kaynakları tüketimi yükselerek devam etmektedir. Mevcut enerji yapısı nedeniyle % 73 oranında dışa bağımlı olan Türkiye, bu oranı azaltabilmek için bir yandan sınırları içinde fosil enerji kaynakları hammaddesi arama çalışmaları yürütürken diğer yandan da yenilenebilir enerji kaynaklarının potansiyelinin belirlenmesi ve kullanımı konusunda çalışmalar yapmaktadır. Bu çalışma Türkiye’nin önemli bölgelerinden biri olan Güneydoğu Anadolu Bölgesi’nin yenilenebilir enerji kaynaklarının mevcut potansiyeli hakkında bir araştırmadır. Güneydoğu Anadolu Bölgesi coğrafi konumundan dolayı Türkiye’de yıllık ortalama güneşlenme süresi 2993 saat/yıl ile en fazla olması, yetiştirilen farklı ve çok çeşitli tarım ürünleri olup yılda en az 2 ürün alınacak şekilde tarım yapılmaktadır. Yapılan bu tarımda yılda sebze, meyve ve tahıldan elde edilen ürün miktarı 9.650.036 ton/yıl kadardır. Hayvancılık bakımından uygun bir bölge olması sebebiyle Türkiye’de yetiştirilen 59.918.211 küçükbaş hayvan sayısının % 12’sine, 19.315.288 büyükbaş hayvan sayısının % 6,72’sine sahiptir. Büyükbaş hayvan atığından yılda elde edilebilecek biyogaz potansiyeli 537.198.289 m3 ve küçükbaş hayvanlardan elde edilebilecek yıllık biyogaz potansiyeli 298.359.737 m3 tür. Tüm bu sebeblerden dolayı Güneydoğu Anadolu Bölgesi yenilenebilir enerji kaynaklarından güneş enerjisi ve biyokütle enerjisi bakımından çok zengin bir bölgedir. Bu çalışmada yenilenebilir enerji kaynakları arasında sahip olduğu mevcut potansiyel hem de üretim teknolojileri bakımından farklı ve önemli bir yerleri olan biyokütle ve güneş enerjilerinin potansiyeli araştırılmıştır. Yapılan çalışmada Güneydoğu Anadolu Bölgesi’nde bir yılda elde edilen ortalama güneş enerjisi 80000 mega ton eşdeğer petrol olup hayvan ve bitkilerden elde edilen kuru biyokütle miktarı ve kuru biyokütlenin ortalama ısıl değeri hesaplanmıştır. Ayrıca Güneydoğu Anadolu Bölgesi için güneş enerjisi ve biyokütle potansiyelinden etkin ve yaygın bir şekilde faydalanmak için önerilerde bulunulmuştur. Anahtar kelimeler: Yenilenebilir Enerji, Güneydoğu Anadolu Bölgesi, Güneş Enerjisi, Biyokütle.
186
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Investigation of The Potential of Southeastern Anatolia Region in Terms of Renewable Energy Sources Hakkı GÜLŞEN1, Celal ÇİFTÇİ2 Harran üniversitesi, Mühendislik Fakültesi, Çevre Mühendisliği, Şanlıurfa, Türkiye Harran üniversitesi, Mühendislik Fakültesi, Çevre Mühendisliği, Şanlıurfa, Türkiye *Responsible author e-mail:
[email protected]
1 2
Abstract
In parallel with the growing population and developing economy of Turkey, which is a developing country, consumption of energy resources continues to increase. Turkey, which is 73% foreign dependent due to its current energy structure, works on the identification and use of the potential of renewable energy resources on the one hand while searching for fossil energy resources raw materials on the other hand in order to decrease this rate. This study is a research on the current potential of the renewable energy resources of Southeastern Anatolia Region which is one of the important regions of Turkey. Due to its geographical location in the Southeastern Anatolia Region, the average annual sunshine duration in Turkey is 2993 hours / year with the highest number of agricultural products grown in different and a variety of agricultural products are produced so that at least 2 crops per year. In this agriculture, the amount of crops, fruits and grains obtained per year is 9,650,036 tons / year. It is 12% of the 59.918.211 ovine animals grown in Turkey and 6.72% of the 19.315.288 bovine owls because it is a suitable region for animal husbandry. Biogas potential of 537.198.289 m3, which can be obtained from bovine waste per year, and 298.359.737 m3 annual biogas potential, which can be obtained from cattle. Because of all these reasons, Southeastern Anatolia Region is very rich in renewable energy sources in terms of solar energy and biomass energy. In this study, the potential of renewable energy sources and the potentials of biomass and solar energy, which are important and different in terms of production technologies, have been explored. The average solar energy obtained in one year in the Southeastern Anatolia Region is 80,000 mega tons of oil equivalent and the average value of dry biomass and dry biomass obtained from animals and plants is calculated. In addition, proposals have been made to utilize the solar energy and biomass potential of the Southeastern Anatolia Region in an effective and widespread manner. Key words: Renewable Energy, Southeastern Anatolia Region, Solar Energy, Biomass.
187
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Atıktan Katık Yaratmak Cem ERGUN1,*, Mustafa Doğacan SÜMER2 Mehmet Akif Ersoy Üniversitesi, Burdur, Türkiye Mehmet Akif Ersoy Üniversitesi, Burdur, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2
Özet Atık ya da gündelik dilde kullandığımız karşılığıyla çöp olgusu günümüzde birçok farklı disiplin tarafından ele alınmakta ve tartışılmaktadır. Sürdürülebilir çevre açısından büyük önem taşıyan atık/çöp geri kazanım uygulamaları; doğal çevre ile etkileşimi açısından öncelikli olarak ele alınmakla birlikte son yıllarda bir istihdam stratejisi olarak da sıklıkla karşımıza çıkmaktadır. Hemen hemen tüm kentlerde atık/çöp toplayıcılığı yaparak gelir sağlamaya çalışan geniş bir kitle söz konusudur. Kentlerin temel üretim faaliyetleri, nüfus yapısı ve tüketim özelliklerine bağlı olarak geri dönüşüm sektöründe yer alan kişi sayısı artmakta ya da azalmaktadır. En genel anlamıyla artık işe yaramayacağı düşünülen ve yaşam alanından uzaklaştırılması gereken bir olgu olarak değerlendirilebilecek olan çöp; yakın dönemde atılması ya da ortadan kaldırılması gereken bir madde olma özelliğini kaybetmiş ve kar amaçlı bir metaya dönüşmüştür. Bu çerçevede geri dönüşüm ön plana çıkmış ve atıklar gerek ekonomik gerekse ekolojik açıdan değer kazanmıştır. Geri dönüşümün önem ve hız kazanmasına paralel olarak; hammadde/enerji kullanımında ve üretim sürecinde doğal çevreye verilen zararda azalma görülmektedir. Geri dönüşümün ekonomik ayağında ise yeni bir istihdam alanı karşımıza çıkmaktadır. Bu çerçevede hemen her kentte görmeye alıştığımız çöp/atık toplayıcıları çöp piyasasının en önemli aktörleri olarak ön planda yer almaktadır. Formel sektörde istihdam alanı bulamayan kesimlerin ağırlıkta olduğu bu kesim yollardaki konteynırlardan ya da çöp döküm alanlarından geri kazanılabilir maddeleri toplamakta ve bu şekilde kendilerine gelir yaratmaktadırlar. Bu kesimin çalışma koşulları gelir oranı dışında enformel sektör çalışma alanlarıyla benzerlik göstermektedir. Bu bağlamda sosyal güvence yokluğu, çalışma saatlerinin belirsizliği, sağlıksız koşullarda çalışma gibi özellikler ön plana çıkmaktadır. Bu çalışmada gerek ekolojik gerekse ekonomik sürdürebilirlik bağlamında önemli katkı sağladığı düşünülen atık/çöp toplayıcılarının iş ve yaşam alanlarına ilişkin bir değerlendirme yapılacak ve geri dönüşüm süreci tartışılacaktır. Anahtar kelimeler: Geri dönüşüm, çöp, atık.
188
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Turning Waste Into Income Cem ERGUN1,*, Mustafa Doğacan SÜMER2 Mehmet Akif Ersoy Üniversitesi, Burdur, Türkiye Mehmet Akif Ersoy Üniversitesi, Burdur, Türkiye *Responsible author e-mail:
[email protected] 1
2
Abstract Waste, or trash in daily language, is studied and discussed by many different disciplines. Waste/trash recycling practices, which are crucial for a sustainable environment, are mainly viewed in terms of their interaction with the natural environment, but in recent years, they have also emerged as an employment strategy. In almost every city, there are large numbers of people who try to make a living by picking waste/trash. The number of people in the recycling sector varies depending on the production activities, population size and consumption characteristics of cities. Waste, defined at the most general level as stuff that is no longer of use and that people want to remove from their living spaces, is no longer viewed as something that needs to be removed or disposed of as soon as possible, and has become a commodity. In this context, recycling gained importance and waste acquired both economic and ecological value. As recycling becomes more prominent and widespread, damage to the natural environment due to production activities or use of raw materials/energy is minimized. In economic terms, on the other hand, recycling emerges as a new field of employment. Waste/trash pickers we are used to seeing in almost every city are the most prominent players in the waste market. Mostly consisting of people who find it difficult to be employed in the formal sector, waste pickers collect recycling materials from garbage bins or waste disposal areas, and earn income from this activity. Their working conditions are similar to the working conditions of people employed in the informal sector in general, except for income. Their work is characterized by lack of social security, irregular hours and unhealthy conditions. This study provides an evaluation of the living and working conditions of waste/trash pickers, who make an important contribution in turns of both ecological and economic sustainability, and discusses the recycling process. Key words: Recycling, garbage, waste.
189
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Aerostat İle Ölçülen Rüzgar Hızlarının Veri Madenciliği Yöntemi Kullanarak Tahmini Cemal IŞILAK1,*, İsmail Serkan ÜNCÜ1 1
Süleyman Demirel Üniversitesi, Teknoloji Fakültesi, Elektrik Elektronik Mühendisliği Isparta,TÜRKİYE *Sorumlu yazar e-posta:
[email protected]
Özet Günümüzde rüzgar enerjisinden elektrik üretimi, tarım, hava araçları, hava sporları gibi bir çok farklı alanlarda kullanılan rüzgar potansiyelinin tahmini büyük bir önem arz etmektedir. Rüzgar potansiyeli mevsimsel, bölgesel, saatlik, coğrafi konum ve yükseklik gibi çok fazla etkene bağlı olarak değişkenlik göstermektedir. Rüzgar potansiyelini verimli kullanabilmek ve istenmeyen durumları engelleyebilmek için rüzgar potansiyelinin tahmini önem arz etmektedir. Literatürde rüzgar tahmininde bulunabilmek için çok yaygın olan Weıbull dağılımı ve daha az kullanılan L-moment yöntemi kullanılmaktadır. Weıbull dağılımı ile ortalama rüzgar hızı ve ortalama rüzgar gücü tahmini yapılmaktadır. Yapılan bu çalışmada aerostat yardımı ile farklı irtifalarda ölçülen rüzgar hız verilerinin modellenerek farklı veri madenciliği regresyon algoritmaları uygulanmıştır ve hesaplanan sonuçlar karşılaştırılmıştır. Anahtar kelimeler: Rüzgar Hızı Tahmini, Veri Madenciliği, Tahminleyici Model.
190
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Estimation Of Wind Speed Measured By Aerostat Using Data Mining Method Cemal IŞILAK1,*, İsmail Serkan ÜNCÜ1 1
Suleyman Demirel University Technology Faculty, Electrical and Electronic Engineering Department, Isparta-TURKEY * Responsible author e-mail:
[email protected]
Abstract Today, the estimation of wind potential is used in many different fields such as electricity generation, wind energy, agriculture, air tools, air sports. Wind potential varies depending on seasonal, region, hourly, geographical location and altitude. Estimation of wind potential is important to be able to use wind potential efficiently and to prevent undesirable situations. In the literature, well know weibull distribution and the less used L-moment method are used to predict the wind. Weibull distribution is used to estimate average wind speed and average wind power. In this study, different data mining regression algorithms were applied by modeling wind speed data measured at different altitudes with the help of aerostat and calculated results were compared. Key words: Estimation of Wind Speed, Data Mining, Predictive algorithms.
191
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Bölgesel Rüzgar Enerji Potansiyelini Aerostat Yardımı İle Belirleme Cemal IŞILAK1,*, İsmail Serkan ÜNCÜ1 1
Süleyman Demirel Üniversitesi, Teknoloji Fakültesi, Elektrik Elektronik Mühendisliği Isparta,TÜRKİYE *Sorumlu yazar e-posta:
[email protected]
Özet Dünyada ve ülkemiz de enerji tüketimi giderek artmaktadır. Enerji tüketimi artarken doğal kaynakların giderek azalması önemli bir sorun haline gelmiştir. Ayrıca ülkemizde enerji üretiminde dışa bağımlılığından kurtulmak için yenilenebilir enerji kaynakları büyük önem arz etmektedir. Yenilenebilir enerji kaynaklarının en bilinen kaynakları güneş enerjisi ve rüzgar enerjisidir. Rüzgar türbini doğada var olan rüzgarın kinetik enerjisinden önce mekanik enerjiye daha sonra elektrik enerjisine dönüştüren sistemlere denir. Rüzgar türbinlerinin kurulumu aşamasında yapılacak sahanın fizibilite raporu hazırlanır. Bu fizibilite raporunda rüzgar analizleri önemli bir yer tutmaktadır. Rüzgar analizleri kurulacak olan sahanın veriminden rüzgar türbininin büyüklüğünün karar verilmesine kadar bir çok noktada fayda sağlamaktadır. Rüzgar analizleri için alana dikilen rüzgar ölçüm direkleri, sodar ölçümleri ve lidar ölçümlerinden faydalanılmaktadır. Bu ölçümlere ilave olarak rüzgar enerjisi potansiyelini tahminde Weibull Dağılımı oldukça sık kullanılan bir metotdur. Bu çalışmada, kademeli olarak 400 m irtifaya kadar çıkabilen platform stabilizasyonu sistemine sahip bir aerostat ile gerçek zamanlı rüzgar ölçümü gerçekleştirilmiştir. Geliştirilen bu yöntem ile aynı konumda birden fazla irtifalarda ölçümler elde edilmiştir. Mevcut sistemlere göre daha yüksek irtifalarda ölçümler yapılmıştır. Direklere göre kurulumu, montajı ve taşınması daha az sürede tamamlanmaktadır. Anahtar kelimeler: Rüzgar Türbini, Rüzgar Analizi, Aerostat.
192
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Determining Regional Wind Energy Potential By Aerostat Assistance Cemal IŞILAK1,*İsmail Serkan ÜNCÜ1 1 Suleyman Demirel University Technology Faculty, Electrical and Electronic Engineering Department, Isparta-TURKEY, * Responsible author e-mail:
[email protected]
Abstract Energy consumption in the world and our country is increasing. while energy consumption increases, the reduction of natural resources has become a major problem. In addition, renewable energy sources are of great importance in our country to get rid of foreign dependence on energy production. The most common sources of renewable energy sources are solar energy and wind energy. It is a system that transforms the wind turbine into mechanical energy electrical energy before the kinetic energy of the wind in the environment. The feasibility report of the site is prepared before the installation of wind turbines. In this feasibility report, wind analysis has an important place. Wind analysis provides many benefits from the efficiency of both the field to be built and the size of the wind turbine is decided. For wind analysis, wind measurement pillar, sodar measurements and lidar measurements are used. In addition to these measurements, the Weibull distribution is a very common method of predicting wind energy potential. In this study, a real-time wind turbine performance analysis is performed with an aerostat system mounted a platform stabilization system that is capable of gradually reaching an altitude of 500 m. With this method developed, measurements were obtained at more than one altitude in the same location. Measurements were made at higher altitudes than existing systems. Installation, installation and transportation are completed in a shorter time than conventional methods. Key words: Wind Turbine, Wind Analysis, Aerostat.
193
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürdürülebilir Toplumsal Kalkınmanın Mihenk Taşı: Çocuk Yoksulluğu Üzerine Karşılaştırmalı Bir Analiz Cemre BOLGÜN1,*, Abdullah IŞIK2 Hacettepe Üniversitesi, Ankara, Türkiye 2 Sinop Üniversitesi, Sinop, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
Özet Çocuk yoksulluğu geçmişten günümüze üzerinde sıklıkla durulan ancak bir türlü çözüme kavuşturulamayan sosyal, ekonomik, politik temelleri bulunan bir sorundur. Yoksulluk; çocukların gelecekte başta fizyolojik olmak üzere birçok sorunla karşılaşmalarına sebep olmakta, bu durum ise toplumun geleceğini doğrudan etkilemektedir. Yoksulluk, çocukların yapabilirliklerini ve toplumsal sürdürülebilirliği doğrudan etkilemektedir. Bu çalışmanın amacı, çocuk yoksulluğuna ilişkin kamusal önlemler arasında yer alan sosyal koruma harcamalarının farklı ülkelerdeki rakamsal yansımalarını incelemek, sonuçları sürdürülebilirlik açısından tartışmaya açmaktır. Bu kapsamda Almanya, Fransa ve Türkiye’de yaşayan çocuklara ve ailelerine ilişkin sosyal koruma harcamaları yoksulluk ve gelir dağılımı çerçevesinde ele alınacaktır. Bu doğrultuda, öncelikle ülkelerin nüfuslarına ilişkin istatistikler incelenecek, genel nüfusun yoksulluk oranı ve çocuk yoksulluk oranları ele alınacaktır. Son olarak GSYH ve Sosyal Koruma Harcamaları gözden geçirilecek, aile ve çocuğa yönelik sosyal koruma harcamalarının GSYH içindeki payları değerlendirilecektir. Elde edilen veriler ışığında, Almanya ve Fransa’da yeniden dağıtım sürecinin önemli düzeyde işlediği görülmektedir. Gün geçtikçe yaş alan bu ülkelerde piyasanın yarattığı yoksulluk düzeyi oldukça yüksek ve gelir dağılımları oldukça adaletsizdir. Bununla birlikte, vergiler ve transfer harcamaları aracılığıyla devletin piyasaya müdahalesi sonucu bu yoksulluk ve gelir adaletsizliği değerlerinin oldukça aşağılara çekildiği görülmektedir. Türkiye’de ise piyasanın yaratmış olduğu yoksulluk ve gelir adaletsizliği Almanya ve Fransa’ya oranla oldukça düşüktür. Bununla birlikte vergi ve transfer harcamaları mevcut yoksulluk ve adaletsizliği çok az etkilemektedir. Dolayısıyla, Türkiye’de yeniden dağıtım sürecinin iyi işlemediği ve devlet müdahalesinin zayıf olduğu bir yapıdan söz etmek mümkündür. Buna ek olarak ekonomik büyüklüğü ve kişi başı milli geliri Fransa ve Almanya’nın çok daha altında olan Türkiye’de sosyal koruma harcamalarının, özellikle de aile ve çocuklara yönelik sosyal koruma harcamalarının GSYH içindeki payları oldukça düşük düzeydedir. Bu çerçevede değerlendirildiğinde Türkiye’de Almanya ve Fransa’nın aksine piyasayı önceleyen ve müdahaleden çekinen bir yapının söz konusu olduğu, devletin gelir adaletsizliği ve yoksulluk gibi sosyal sorunlara minimum düzeyde müdahale ettiği, bu anlamda daha neo-liberal bir bakış açısının söz konusu olduğu görülmektedir. Bu durumun toplumsal sürdürülebilirlik açısından çocuk yoksulluğu ile mücadelede Türkiye adına bir dezavantaj yarattığı söylenebilir. Çocuk yoksulluğunun önüne geçilebilmesi adına çocuklara yönelik sosyal koruma harcamalarının GSYH içindeki payının arttırılması, bu harcamaların yardım bağımlılığını ortadan kaldıracak biçimde planlanması ve hayata geçirilmesi kritik bir önem taşımaktadır. Anahtar kelimeler: Çocuk yoksulluğu, sürdürülebilirlik, sosyal koruma harcamaları.
194
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Cornerstone of Sustainable Community Development: A Comparative Analysis on Child Poverty Cemre BOLGÜN1,*, Abdullah IŞIK2 1
Hacettepe University, Ankara, Turkey 2 Sinop University, Sinop, Turkey *Responsible author e-mail:
[email protected]
Abstract Child poverty is a problem which has social, economic and political basis. The issue is frequently emphasized but could not be transformed into a kind of solution. Poverty causes many problems for children to encounter in their future which directly affects the future of the society. Poverty has a direct impact on children's capabilities and social sustainability. The aim of this study is to examine the numerical implications of social protection expenditures in different countries in terms of public measures on child poverty and to open the debate in terms of sustainability. In this context, social protection expenditures on children and their families living in Germany, France and Turkey will be addressed within the context of poverty and income distribution. Firstly, statistics of the countries' population and the general population's poverty rate will be examined and child poverty rates will be discussed. Finally, GDP and social protection expenditures will be examined and the share of social protection expenditures for family and child in GDP will be discussed. In the light of the obtained data, it is seen that the redistribution process at a considerable level is operating in Germany and France. In these age-old countries, the level of poverty created by the market is quite high and income distributions are highly unfair. However, as a result of state intervention to the market economy through taxation and transfer expenditures, it is seen that these poverty and income injustice values are becoming quite inferior. On the other side, in Turkey, the poverty and income injustice that the market has created is very low compared to Germany and France. Tax and transfer expenditures, however, have little impact on existing poverty and injustice. Therefore, it is possible to mention a structure in Turkey where the redistribution process is not executed well and the state intervention is weak. In addition, the share of social protection expenditures in GDP in Turkey is quite low when compared to France and Germany, especially the social protection expenditures for families and children. In this framework, it is seen that in Turkey, contrary to Germany and France, the state intervenes in income injustice and poverty to a minimum level and priotizing the market economy with a more neo-liberal viewpoint. It can be said that this creates a disadvantage for Turkey in struggle with child poverty in the context of creating sustainable communities. In order to prevent child poverty, it is essential to increase the share of social protection expenditures for children in GDP, and it is crucial to plan and conduct these expenditures in a way which priotize to remove aid dependency. Key words: Child poverty, sustainability, social protection expenditures.
195
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Antik Yunan ve Günümüz Tiyatrosu’nun Siyasi ve Toplumsal İşlevinin Kültürel Sürdürülebilirliğe Katkısı Üzerine İncelemeler ve Düşünceler Ceren AŞİR1,* Uludağ Üniversitesi, Bursa, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
Özet Günümüzde pek çok toplumsal ve siyasi kurumun antik Yunan’dan temellenerek çağdaş bazı değişikliklerle devam ettiriliyor olması, antik Yunan toplumunun bilincinde belirgin olarak görülen istikrarın ve çözüme yönelik çabaların, doğruluğunu gözler önüne sermektedir. Dünya Tarihi’ne bakıldığında da, tüm gelişmiş toplumların temelinde benzer bilincin yatıyor olduğu gözlenmektedir. Bu sebeple toplumların gelişimine kaynaklık eden her türlü düşünce ve faaliyet, uygarlığın gelişimi ve kültürel sürdürülebilirlik açısından oldukça önemlidir. Tiyatro gösterileri de geçmişten günümüze, zaman zaman toplumların gelişimine kaynaklık edebilen faaliyetler arasında yer almıştır ve almaktadır. Erken dönemde tiyatro gösterilerinin ortaya çıkışı, birçok toplum tarafından dinsel ayin amaçlı başlatılan gösteriler ile gerçekleştirilmiş olsalar da, zamanla bu gösteriler beğenilmiş, başta antik Yunan yazarları tarafından, oyun haline getirilerek sahnelenmeleri sağlanmış ve böylece toplumsal gelişime kaynaklık edecek bir faaliyetin daha temelleri atılmıştır. Bu durum ile birlikte, eğlendirmenin yanında hem halkı aydınlatmak hem de yönetimde ki aksaklıklara dikkati çekmek amacıyla çeşitli eserler ortaya çıkarılmış ve toplumların ilerlemesine katkıda bulunulmuştur. Bu sebeple çalışmamızda; Antik Yunan ve Günümüz Tiyatrosu’nun konuları, siyasi ve toplumsal işlevleri açısından, incelenmiş ve karşılaştırmalarla kültürel sürdürülebilirlik ve uygarlığın gelişimi açısından, değerlendirmeler yapılmıştır. Anahtar kelimeler: Kültürel sürdürülebilirlik, Antik Yunan tiyatrosu, günümüz tiyatrosu, siyasi ve toplumsal işlev.
196
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Analyzes and Thoughts on the Contribution of the Political and Social Function of Ancient Greek and Contemporary Theatre to Cultural Sustainability Ceren AŞİR1,* Uludağ University, Bursa, Turkey *Responsible author e-mail:
[email protected] 1
Abstract The fact that many modern social and political institutions are based on ancient Greece and resumed with some modern changes reveals the correctness of the efforts towards stability and solution, which are conspicuous in the consciousness of ancient Greek society. Upon a look at the World history, a similar consciousness laying at the basis of all developed societies is observed. Therefore, for the development of civilization and cultural sustainability, all kinds of ideas and activities, which provide resources for the development of societies are very important in terms of sustainability. From the past to the present, theatre performances themselves have taken place among the activities, which might provide resources for the activities for the development of societies, and they still do so. Although the emergence of theatre performances commenced by the aims of religious rites in many societies in the early period, they were liked, produced as plays mainly by the Greek writers, acted, and thus started the basis of another activity to provide resources for the development of the society. Besides entertainment, in order to enlighten the society and draw attention to the impediments in governance, plays were produced and contributed for the development of the societies. Therefore, in our the study; the issues of ancient Greek's and today's theatre have been analyzed in terms of their political and social functions, and by comparisons, they have been evaluated in terms of cultural sustainability and development of civilization. Key words: Cultural sustainability, ancient Greek theatre, contemporary theatre, political and social function.
197
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Ebû Nasr El- Farabî’nin İdeal Devlet Anlayışı Ceyda ALTINTOP1,* Uludağ Üniversitesi / Bursa / Türkiye Sorumlu yazar e-posta:
[email protected] 1
*
Özet Bu çalışmada, Farabi’nin ideal devlet tasarımı ve iyi bir devlet yönetiminin sağlanması yolunda kurmuş olduğu siyaset felsefesi üzerinde durulacaktır. Söz konusu siyaset felsefesinin öncesinde ahlak ve mutluluk ile ilişkisi incelenecek sonrasında ise erdemli ve erdemsiz toplum modelleri ışığında erdemli başkan modeli ele alınacaktır. Sonuç olarak ise Farabi’nin vahye dayalı bir İslâm kültürü içerisinde ortaya koymuş olduğu ideal devlet şeklinin Grek kültürünün siyaset felsefesi dünyasından örnek alınmış olma ihtimali değerlendirilecektir. Anahtar kelimeler: Platon, Farabi, Siyaset, Ahlâk, Mutluluk, Erdemli Şehir, Toplum.
198
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Ideal Understanding Of State Ebû Nasr El- Farabî Ceyda ALTINTOP1,* Uludağ Üniversitesi / Bursa / Türkiye Responsible author e-mail:
[email protected] 1
*
Abstract
In this Study, philosophy of political science that Farabi established in the direction of ideal state design and the provision of good government will be observed. At First the question of political philosophy will be examined in relation to morality and happiness and then the virtuous president model will be discussed under virtuous and virtueless community models. As a result The possibility of Farabi's example of the ideal state, which is revealed in a religion-based Islamic culture, is taken from the world of political philosophy of Greek culture will be evaluated. Key words: Philosphy, Cassirer, Human, Popular Culture, Society.
199
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Bir Çağın Kavgasında Hegel Ve Schopenhauer Ceyda ALTINTOP1,* Uludağ Üniversitesi / Bursa / Türkiye Sorumlu yazar e-posta:
[email protected] 1
*
Özet
Bu makalede, 19. Yüzyılda Hegel’in çalışmalarının önem arz etmesine sebep olarak “Devlet Felsefecisi” olmasını gören Schopenhauer’ın Hegel felsefesine yönelik eleştirileri ele alınacaktır. Bu eleştiriler doğrultusunda Hegel’in felsefesi Schopenhauer’ın gözleri ödünç alınarak gözlemlenecek ve Hegel’e yönelik eleştirilerindeki haklılık payı incelenmiş olacaktır. Sonuç olarak ise bugün “değersiz” görülen felsefenin olası bir 21. Yüzyıl Hegel’i ile değer kazanması ihtimali düşünüldüğünde bu durum Schopenhaur’ın eleştirdiği felsefe yapma biçimi doğrultusuna değerlendirilmiş olacaktır. Anahtar kelimeler: Hegel, Schopenhauer, Eleştiri, İnsan, Devlet, Felsefe.
200
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
At A Fight Of Age Hegel And Schopenhauer Ceyda ALTINTOP1,* Uludağ Üniversitesi / Bursa / Türkiye Responsible author e-mail:
[email protected] 1
*
Abstract
In this study, Schopenhauer's criticism of Hegel's philosophy, which sees Hegel's work as important as the "State Philosopher" in the 19th century will be discussed. In the light of these criticisms, the eyes of Hegel's philosophy, Schopenhauer will be borrowed and observed, and legitimacy of Hegel's criticism will be examined. As a result, considering the possibility that today's "worthless" philosophy could be valued with a possible 21st-century Hegel, this would be assessed in the direction of Schopenhaur's philosophy of criticism. Key words: Hegel, Schopenhauer, Criticism, Human, State, Philosophy.
201
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Kültürel Sürdürülebiliriği Engellemesi Noktasında Popüler Kültür ve Etkisi Ceyda ALTINTOP1,* Uludağ Üniversitesi / Bursa / Türkiye Sorumlu yazar e-posta:
[email protected] 1
*
Özet
Bu makalede, antropoloji, tarih, sosyoloji, felsefe, edebiyat, psikoloji ve iletişim gibi farklı disiplinlerin ilgi alanına giren kültür kavramı “popüler kültür” noktasında incelenmektedir. Popüler kültürün etkisine değinmeden önce kültür kavramına yer verilecek, beraberinde kültürün felsefe tarihindeki yerine örnek olması adına bu alanda çalışmaları olan Cassirer’in bakış açısı ışığında insan ve kültür ilişkisi incelenecektir. İncelemelerim doğrultusunda ise dayanak noktası tüketilen nesneler olan popüler kültür gerçeğine değinilecektir. Sonuç kısmında, tüketim kültürünün etkisiyle son dönemlerde fazlasıyla hissedilen, toplumun kendine ait kültürünü ise yok etme derecesine getiren popüler kültürün, kültürel sürdürülebilirlik noktasındaki etkisi incelenmiş olacaktır. Anahtar kelimeler: Kültür, Felsefe, Cassirer, İnsan, Popüler Kültür, Toplum.
202
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Popular Culture And Effect About Prevent Cultural Sustainability Ceyda ALTINTOP1,* Uludağ Üniversitesi / Bursa / Türkiye Responsible author e-mail:
[email protected] 1
*
Abstract
In this Study, The concept of culture which is in the interest of different disciplines such as anthropology, history, sociology, philosophy, literature, psychology and communication is examined at the point of "popular culture". The concept of culture will be introduced before the influence of popular cultures, thenin the light of Cassirer's point of view, the relationship between human and culture will be examined for being an example of the place of culture in history of philosophy. According to observations, the base point will be referred to the fact that popular culture is consumed objects. The influence of consumption culture on the popular culture that has become more and more felt in the recent times which brings the society's own cultural product to the level of destruction will be examined at the point of cultural sustainability. Key words: Culture, Philosphy, Cassirer, Human, Popular Culture, Society.
203
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Determination Of The Surface Properties Of Bentonite By Inverse Gas Chromatography Ceyda Bilgiç1,* 1
Department of Chemical Engineering, Faculty of Engineering and Architecture, Osmangazi University, Eskişehir, Turkey * Responsible author: e-mail:
[email protected]
Abstract Inverse gas chromatography (IGC) was applied to characterize the surface of bentonite. The adsorption thermodynamic parameters (the standard enthalpy ( H 0 ), entropy ( S 0 ) and free energy of adsorption ( G 0 ), the dispersive component of the surface energy ( Sd ), and the acid/base character of bentonite surface were estimated by using the retention time of different non-polar and polar probes at infinite dilution region. The specific free energy of adsorption ( G sp ), the specific enthalpy of adsorption ( H sp ), and the specific entropy of adsorption ( S sp ) of polar probes on bentonite were determined. G sp were correlated with the donor and modified acceptor numbers of the probes to quantify the acidic KA and the basic KD parameters of the bentonite surface. The values obtained for the parameters KA and KD indicated a basic character for bentonite surface. Key words: Inverse gas chromatography, Adsorption thermodynamic parameters, Acid-base surface characteristics, kaolinite.
204
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Inverse Gas Chromatographic Characterization Of Nanocrystalline Cellulose Ceyda Bilgiç1,*, Naile Karakehya2, Özge Kanık3 Department of Chemical Engineering, Engineering and Architecture Faculty, Eskişehir Osmangazi University, Eskişehir, Turkey 2 Environmental Control and Protection Programme, Eskişehir Vocational School, Eskişehir OsmangaziUniversity, Eskişehir, Turkey 3 Department of Chemical Engineering, Engineering and Architecture Faculty, Eskişehir Osmangazi University, Eskişehir, Turkey * Responsible author e-mail:
[email protected] 1
Abstract Nanocrystalline cellulose (NCC) is an important nanomaterial and the main component of the plant cell walls. NCC is biocompatible, biodegradable and renewable. In the recent years, NCC was the subject of numerous academic and applied researches due to its unique physical and chemical properties. NCC was obtained from acid hydrolysis followed by ultrasound sonication of cellulose fibres. NCC has very high surface area, as well as plenty of hydroxyl groups, which make it suitable for many types of surface modifications. The interaction of NCC with different solutes can provide important information for the improvement of surface properties of NCC. Inverse gas chromatography (IGC) permits to evaluate the various surface properties of solids materials under test. In this study, a stainless steel GC column was filled with NCC particles of size ranging from 0.15 to 0.3 mm and polar-apolar probes of known physicochemical constants were injected at infinite dilution conditions. Symmetrical (Gaussian) chromatographic peaks were obtained. The results were discussed in relation to the literature. Key words: Nanocrystalline cellulose; Surface properties, Inverse gas chromatography (IGC).
205
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürdürülebilir Tarımsal Üretim için Toprak Nem Sensörlerinin Etkin Kullanımı Cihan KARACA1,*, Begüm TEKELİOĞLU1, Dursun BÜYÜKTAŞ1 Akdeniz Üniversitesi Ziraat Fakültesi Tarımsal Yapılar ve Sulama Bölümü, Antalya, Türkiye *Sorumlu yazar e-posta:
[email protected]
1
Özet Nüfus artışına paralel olarak artan besin ihtiyacı, tarımsal alanların şehirleşme ve yanlış arazi kullanımı sonucu azalması ve diğer nedenlerle üretim sonrası yaşanan ürün kayıpları sonucunda her yıl daha fazla bitkisel üretim yapılmasını zorunlu kılmaktadır. Birim alandan elde edilecek ürün miktarını arttırmak için en önemli uygulamaların başında sulama gelmektedir. Düzenli ve kontrollü sulama uygulamaları ile birim alandan elde edilen verim artarken aşırı su kullanımı sonucunda çevreye olan zararlar da önemli düzeyde azaltılmaktadır. Bunun yanında, toprakta bulunan su miktarının bilinmesi sulama suyu ihtiyacı ve sulama programlaması açısından önemlidir. Gelişen teknoloji sayesinde toprak neminin ölçülmesi gravimetrik yaklaşımdan ziyade daha çok toprak nem sensörleri kullanılarak yapılmaya başlanmıştır. Bu amaçla geliştirilmiş çok sayıda toprak nem sensörü bulunmaktadır. Bu sensörler çalışma prensibi açısından TDR (Zaman Alan Reflektometresi), FDR (Kapasitans ya da Frekans Alan Reflektometresi), TDT (Zaman Alan İletimölçer), nötron prob ve dielektrik sabiti adı altında toplanmaktadırlar. En çok kullanılan toprak nemi ve su potansiyeli sensörleri tansiyometreler, TDR toprak nemi probları, kapasitans toprak su içeriği sensörleri, toprak su içeriği profil probları, toprak sütunları için gerilimölçer, nötron prob ve alçı bloklarıdır. Maliyetinin düşük oluşu ve son yıllarda ölçüm güvenilirliğin artmasından dolayı kapasitans toprak su içeriği sensörlerinin kullanımı artmıştır. Bu çalışmada yaygın olarak kullanılmaya başlanan toprak nem sensörlerinin çeşitleri ve bu sensörlerin sürdürülebilir tarım açısından öneminin belirlemesi amaçlanmıştır. Anahtar kelimeler: Gravimetrik Yöntem, Toprak Nem Sensörü, Nem Sensörlerinin Karşılaştırılması.
206
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Efficient Use of Soil Moisture Sensors for Sustainable Agricultural Production Cihan KARACA1,*, Begüm TEKELİOĞLU1, Dursun BÜYÜKTAŞ1 1
Akdeniz University, Faculty of Agriculture, Department of Farm Structure and Irrigation, Antalya, Turkey *Responsible author e-mail:
[email protected]
Abstract Increasing nutrient demand in parallel with population growth makes it necessary to carry out more crop production every year as a result of loss of crops after production due to decreasing urbanization and wrong land use of agricultural areas and other reasons. Irrigation is one of the most important applications to increase the quantity of products to be obtained from the unit area. Regular and controlled irrigation practices increase the efficiency obtained from the unit area, but also damage to the environment as a result of excessive water use is significantly reduced. Besides, knowing the amount of water in the soil is important in terms of irrigation water requirement and irrigation scheduling. Thanks to the developing technology, the measurement of soil moisture has started to be done mostly using soil moisture sensors rather than the gravimetric approach. A number of soil moisture sensors have been developed for this purpose. These sensors are classified under TDR (Time Domain Reflectometry), FDR (Capacitance or Frequency Domain Reflectometry), TDT (Time Domain Transmissometry), neutron probe and dielectric constant in terms of operating principle. The most commonly used soil moisture and water potential sensors are tensiometers, TDR soil water content sensors, capacitance soil water content sensors, soil water content profile probes, soil water content profile probes, neutron probes and gypsum blocks. The use of capacitance soil water content sensors has increased due to the lower cost and increased reliability of measurement in recent years. In this study, it is aimed to determine the types of soil moisture sensors that have been widely used and the importance of these sensors in terms of sustainable agriculture. Key words: Gravimetric Method, Soil Moisture Sensor, Comparison of Soil Moisture Sensors.
207
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürdürebilirlik İçin Akaryakıt Transfer Ünitesi Hava Ayırıcı Kapağı Tasarım ve Üretiminde Optimizasyon Cihan ÖZORAK1,*, Özkan KÜÇÜK1, Burak ÖZTÜRK2 1
Kastamonu Üniversitesi, Malzeme Bilimi ve Nanoteknoloji Mühendisliği, Kastamonu, Türkiye 2 Kastamonu Üniversitesi, Malzeme Bilimi ve Mühendisliği, Kastamonu, Türkiye *Sorumlu yazar e-posta:
[email protected]
Özet Akaryakıt transfer üniteleri ile benzin, mazot ve yağ gibi akışkan malzemelerin transferi gerçekleşir. Pompa ile montajı yapılan hava ayırıcısı pompanın yakıtı emmesi sırasında aldığı havayı akaryakıttan ayırarak dışarıya atılmasını ve sayaca karışmamasını sağlar. Böylelikle doğru bir ölçüm yapılabilmektedir. Hava ayırıcı içinde aynı zamanda bir filtre bulunmaktadır. Bu filtre ile akaryakıt içinde yer alan yabancı maddeler ayrıştırılır. Bu çalışmada filtrenin takılıp sökülmesi için kullanılan hava ayırıcısı kapağı tasarımında optimizasyon sağlanmıştır. Farklı tip tasarımlar geliştirilmiş ve sonlu elamanlar yöntemi ile mühendislik gerilmeleri dikkate alınarak tasarımda optimizasyon gerçekleştirilmiştir. Minimum gerilme ve maksimum emniyet katsayısı için kuşaklı ve iç bilezikli bir tasarım seçilmiştir. Etial 171 malzemesinden döküm yolu ile üretilen hali hazırda üretimi yapılan kapak üç operasyonda işlenmektedir. Geliştirilen bu tasarım alüminyum enjeksiyon kalıbı tasarımı yapılarak imalat operasyonları ortadan kaldırılmıştır. Talaşlı imalatı ortadan kaldırılarak üretimde optimizasyon sağlanmakla birlikte minimum malzeme kullanımı ve maksimum mühendislik özellikleri sergilemesi için tasarımda optimizasyon sağlanarak üretimde sürdürülebilirlik ve verimlilik sağlanmıştır. Basınçlı döküm ve döküm yönteminin mikroyapı ve sertlik değişimleri karşılaştırmalı olarak incelenmiştir. Anahtar kelimeler: Alüminyum Enjeksiyon, Tasarında Optimizasyon, Sürdürebilirlik.
208
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Optimization of Air Separation Cover Design and Production for Fuel Transfer Unit for Sustainability Cihan ÖZORAK1,*, Özkan KÜÇÜK1, Burak ÖZTÜRK2 1
Kastamonu University, Materials Science and Nanotechnology Engineering, Kastamonu, Turkey 2 Kastamonu University, Materials Science and Engineering, Kastamonu, Turkey *Responsible author e-mail:
[email protected]
Abstract Transfer of fluid materials such as gasoline, oil and oil with fuel transfer units. The air separator, which is installed with the pump, separates the air taken from the fuel by the pump and ensures that it does not mix with the other. In this way, accurate measurements can be made. There is also a filter in the air separator at the same time. With this filter, the foreign substances contained in the fuel are separated. In this study, the design of the air separator cover used for attaching and detaching the filter was optimized. Different types of designs have been developed and design optimization has been done considering the engineering stresses by the finite element method. A belt and inner ring design has been chosen for minimum tension and maximum safety factor. Etial 171 is produced by casting from the material is currently produced in the door is processed in three operations. The design of this developed aluminum injection mold has been eliminated and manufacturing operations have been abolished. The machining has been removed from the manufacturing process and optimization has been ensured in production, design optimization has been achieved in order to exhibit minimum material usage and maximum engineering properties, thus ensuring sustainability and productivity in production. Microstructure and hardness variations of pressure die casting and casting method are examined comparatively. Key words: Aluminum injection, Optimization by Design, Sustainability.
209
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Pirinç Malzemesi İnce Talaşı Geri Dönüşümü ile Güçlendirilmiş Fittings Malzemelerinin Diş Açma İşlemi Enerji Tüketiminde Optimizasyon Cihan ÖZORAK1,*, Özkan KÜÇÜK1, Burak ÖZTÜRK2 1
Kastamonu Üniversitesi, Malzeme Bilimi ve Nanoteknoloji Mühendisliği, Kastamonu, Türkiye 2 Kastamonu Üniversitesi, Malzeme Bilimi ve Mühendisliği, Kastamonu, Türkiye *Sorumlu yazar e-posta:
[email protected]
Özet Boru bağlantı elemanları endüstride TS 11 EN 10242 standartlarına göre üretilmektedir. Ülkemizde üretimi yapan 13 TSE onaylı kuruluş Çin ve Tayvan malı ürünlerle rekabet edemeyerek batmış ve sadece 2 adet üretici kalmıştır. İthal ürünler ince cidarlı ve kırılgan olduğundan su basması, gaz sızdırması gibi tehlikelere özellikle ülkemizdeki kış şartları dikkate alındığında yol açmaktadır. Temper döküm fittings malzemelere temperleme veya sfero malzemelere ise östenitleme işlemi endüstride uygulamaktadır. Temperleme sertliği artırmakla birlikte işlenebilirliği düşürmekte olup östenitleme ısıl işlemi ise işlenebilirliği artırırken mekanik özellikleri zayıflatmaktadır. Buda üretimde maliyetleri artırırken kaliteyi azaltmaktadır. Özellikle Hindistan ve Amerika'da makine ekipmanları ve akışkan transfer sistemlerinde yaygın olarak kullanılan ve ülkemizde üretimi olmayan 6061-T6 fittings malzemesi bu çalışma ile geliştirilmek istenmiştir. Freze tezgahında finish işlemede ortaya çıkan ince talaşlar sürdürülebilirlik için geri dönüşümle döküm işleminde %8 oranında 6061 alüminyum alaşımına katılmıştır. Bu yeni malzeme 6061 alaşımlı malzeme ile karşılaştırmalı olarak CNC freze tezgahında diş açma işleminde işlenebilirliği; enerji-güç dönüşüm denklemleri kullanılarak ve Taguchi metodu uygulanarak araştırılmıştır. Mikroyapı ve sertlik değişimleri incelenmiştir. Bu yeni alaşımın mekanik özellikleri ve mikroyapıyı iyileştirdiği gözlenmiştir. Talaşlı imalat özel enerji tüketimi (SEC) ve özel kesme enerjisi (SCEC) tüketimi hesaplanarak talaşlı enerji tüketiminde optimizasyon sağlanmıştır Anahtar kelimeler: Geri Dönüşüm, Enerji Tüketimi, Diş Açma.
210
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Optimization of Energy Consumption of Threading Process of Fittings Materials Reinforced with Fine Material Recycling of Brass Material Cihan ÖZORAK1,*, Özkan KÜÇÜK1, Burak ÖZTÜRK2 1
I Kastamonu University, Materials Science and Nanotechnology Engineering, Kastamonu, Turkey 2 Kastamonu University, Materials Science and Engineering, Kastamonu, Turkey *Responsible author e-mail:
[email protected]
Abstract Pipe fittings are manufactured according to TS 11 EN 10242 standards. Thirteen TSE approved producers in our country have failed to compete with Chinese and Taiwanese products and only 2 producers have stayed. Imported products are vulnerable due to their thin walls and brittle, causing danger such as flooding and gas leakage especially when considering the winter conditions in our country. The tempering casting fittings are tempered to the materials or the austenitic treatment is applied to the ductile iron. Tempering reduces the machinability with increasing hardness, while the austenitic heat treatment weakens the mechanical properties while increasing machinability. While increasing costs in production, it reduces quality. Especially in India and America, 6061T6 fittings which are widely used in machine equipments and fluid transfer systems and which are not produced in our country are desired to be developed with this work. The finer chips produced in the finishing process on the milling machine have been added to the 6061 aluminum alloy in 8% recycling process for sustainability. This new material is comparable to 6061 alloy material with machinability in threading on CNC milling; Energy-power conversion equations and applying the Taguchi method. Microstructure and hardness changes were investigated. It has been observed that this new alloy improves the mechanical properties and microstructure. The machining special energy consumption (SEC) and the special cut-off energy consumption (SCEC) are calculated and the threading energy consumption is optimized Key words: Recycling, Energy Consumption, Threading.
211
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
TWIP Çelikleri Cihangir Tevfik SEZGİN1,* Kastamonu Üniversitesi, Kastamonu, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
Özet Bu çalışmada otomotiv endüstrisinde kullanılan yeni nesil çeliklerden TWIP çeliklerinin önemi ve çevreye olan etkileri literatür taraması olarak sunulmuştur. TWIP çeliklerin ekolojik sürdürülebilir etkileri incelenmiştir. Bu çeliklerin üretimi, mekanik özellikleri, otomotiv sektöründeki yakıt tüketimine olan etkileri araştırılmıştır. Ülkemizdeki bu çeliklerin üretimi ve ihtiyacı araştırılmıştır. Anahtar kelimeler: TWIP çelikleri, otomotiv endüstrisi, ekolojik sürdürülebilirlik, yakıt tüketimi.
212
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
TWIP Steels Cihangir Tevfik SEZGİN1,* 1
Kastamonu University, Kastamonu, Turkey *Responsible author e-mail:
[email protected]
Abstract In this study, the importance of the TWIP steels as a next generation steel used in the automotive industry is presented as literature review. The ecological sustainable effects of TWIP steels have been examined. The production, mechanical properties of these steels, and the effects on fuel consumption in the automotive sector have been investigated. The production and need of these steels in our country has been investigated. Key words: TWIP steels, automotive industry, ecological sustainable, fuel consumption.
213
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Otomotiv Endüstrisinde Yeni Nesil Çelik Kullanımının Önemi Cihangir Tevfik SEZGİN1,* Kastamonu Üniversitesi, Kastamonu, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
Özet Bu çalışmada otomotiv endüstrisinde kullanılan yeni nesil çeliklerin önemi ve çevreye olan etkileri literatür taraması olarak sunulmuştur. Yeni nesil çeliklerin ekolojik sürdürülebilir etkileri incelenmiştir. Son yıllarda otomotiv üreticilerinin bu alanda yaptığı çalışmalar incelenmiştir. Ülkemizdeki bu çeliklerin üretimi ve ihtiyacı araştırılmıştır. Anahtar kelimeler: Yeni nesil çelikler, otomotiv endüstrisi, ekolojik sürdürülebilirlik.
214
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Importance of Using New Generation Steel in Automotive Industry Cihangir Tevfik SEZGİN1,* 1
Kastamonu University, Kastamonu, Turkey *Responsible author e-mail:
[email protected]
Abstract In this study, the importance of the new generation steel used in the automotive industry and its environmental impacts are presented in the literature review. The ecological sustainable effects of new generation steels have been examined. The researchs of automotive manufacturers have done in the last few years has been examined. The production and need of these steels in our country has been investigated. Key words: New generation steels, automotive industry, ecological sustainable.
215
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Tarımın Çevre Üzerine Olumsuz Etkilerinin Azaltılması Çalışmaları “Çevre Amaçlı Tarım Arazilerinin Korunması Projesi Ereğli İlçesi Pilot Uygulaması; Dünü-Bugünü’’ Erdal GÖNÜLAL 1,*, Çetin PALTA 2 2
1 Toprak ve Su Kaynakları Araştırma Enstitüsü, Konya, Türkiye NEÜ Ereğli Mühendislik ve Doğa Bilimleri Fakültesi, Konya, Türkiye * Sorumlu yazar e-posta:
[email protected]
Özet Yeryüzünde hayatın başlamasıyla yaşıt olan tarımsal üretimde geçmişten günümüze kadar toprak insanlar için çok önemli bir faktör olmuştur. İnsanoğlunun yerleşik düzene geçiş aşamasında etrafındaki bitkisel ürünler karın doyurmak için yeterli olmuştur. İnsanoğlu yerleşik düzene geçtikten sonra nüfusunda artmasıyla birlikte toprağa müdahale başlamıştır. Günümüzde bu müdahale çok önemli seviyeye ulaşmış toprağı ve çevreyi tehdit edecek hale gelmiştir. Geçtiğimiz yüzyılda tarımsal araştırmalar ve desteklemeler genelde bitkisel üretimde verim ve kalite artışına endeksli olarak yürütülmüş olup, toprak ve çevrenin alarm vermeye başlamasıyla tarımsal üretimde çevre ve tarım arazilerinin korunması ile ilgili çalışmalarda yapılması gerektiği ve üretirken çevreyi de korumanın önemli olduğu anlaşılmıştır. Tarımsal üretimin yoğun olarak yapıldığı Ereğli bölgesi özellikle son 10 yıldır önemli oranda rüzgar erozyonuna maruz kalmış, yer altı suları azalmış, yaşam ve tarımsal üretim olumsuz etkilenmiştir. Ülkemizin birçok bölgesinde görülen benzeri durumların önüne geçebilmek için şimdiye kadar genelde bitkisel üretime destek veren ve bu konuda çalışmalar yapan Gıda Tarım ve Hayvancılık Bakanlığı 2006 yılında 4 yerde pilot olarak Çevre Amaçlı Tarım Arazilerinin Korunması (ÇATAK) projesini hayata geçirmiştir. Projenin pilot uygulama yerlerinden biriside Ereğli İlçesi olmuştur. 2006 yılında 5 köyle başlayan proje 2011 yılı itibariyle 18 köyde uygulanmaktadır. Bu projede asıl amaç tarımsal üretimde toprak, su ve doğal kaynakların korunması ve sürdürülebilir Arazi yönetimi için bu uygulamalara katılan üreticilerin eğitilmesi ve desteklenmesidir. Proje kapsamında yürütülen çalışmalardan başlıcaları şunlardır: Rüzgar erozyonuna karşı tarım arazilerinin etrafının ağaçlandırılıp canlı perde oluşturulması, işlemesiz tarım, azaltılmış toprak işleme, organik gübre uygulamaları, şeritvari sürüm, münavebe ve alternatif üretim, toprağın kritik dönemlerde bitkisi örtüsüyle kaplı bulunmasının sağlanması, az su tüketen çok yıllık yem bitkileri üretimi, ilaç, gübre ve kimyasal uygulamalarının kontrol altına alınması, basınçlı sulama sistemlerinin yaygınlaştırılması ve de en önemlisi üreticilerde bu bilincin sağlanması için yoğun eğitimlerin yapılmasıdır. Bu çalışmaların meyvelerini vermeye başlamasıyla bölgede tarımsal üretimin sürdürülebilir olması ve her yıl yaşanan erozyonun yaşam üzerindeki olumsuz etkilerin azalması beklenen yarardır. Anahtar Kelimeler: Ereğli, ÇATAK, Erozyon, Toprak, Çevre.
216
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Efforts To Reduce The Negative Impacts of Agriculture on The Environment “Ereğli District Pilot Implementation of The Project for The Protection of Agricultural Land for Environmental Purposes; Past-Present’ Erdal GÖNÜLAL1,*, Çetin PALTA 2 1
2
Soil and Water Resources Research Institute, Konya, Turkey NEU Ereğli Faculty of Engineering and Natural Sciences, Konya, Turkey *Responsible author e-mail:
[email protected]
Abstract In agricultural production, which is the same age as life on earth begins from the past to the present has been a very important factor to the people of the earth. During the transition phase to the established order of mankind around herbal products, has been enough to satiate the belly. After human beings settled in, began to intervene in the soil with increase in population. Today, this intervention reached very significant levels in the soil and has become a threat to the environment. In the last century generally supports agricultural research and crop production to increase yield and quality and soil environment was conducted as indexed to the alarm and begin environmental studies as related to the protection of agricultural land in agricultural production and protecting the environment while producing should be made and it is understood that is important. Agricultural production is heavily exposed to wind erosion, especially in the last 10 years made significant Ereğli district, groundwater has decreased and life has been adversely affected agricultural production. In order to avoid similar situations in many parts of our country, so far who is working on this issue in general support crop production and Food, Agriculture and livestock Ministry in 2006 as a pilot in 4 Place the protection of agricultural land for environmental purposes (ÇATAK) has initiated a project. Pilot implementation of the project became one of the places in ereğli district. Starting with 5 villages in 2006, the project is being implemented in 18 villages as of 2011. In this project the main objective of agricultural production land, water and Natural Resources for conservation and sustainable land management practices training and support from participating manufacturers. The major types of activities under the project are as follows: against wind erosion of agricultural land and the creation of a vibrant curtain around agaclandirili, no-till farming, reduced tillage, organic fertilizer application, stripped version of the alternation, and alternative production, help ensure that plants are covered with soil during critical periods, and the production of perennial forage crops consuming less water, pharmaceuticals, fertilizer and chemical application are under control, pressurized irrigation systems, the dissemination and, most importantly, this consciousness is the provision of intensive training for producers. Begin to show the fruits of this work to be sustainable as the erosion of agricultural production in the region and each year the expected benefit of reducing the negative impact on the life of experienced. Key words: Ereğli, ÇATAK, soil erosion, Environmental.
217
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Halloysit Üzerinde Metil-Viyolet Boyar maddenin Adsorpsiyon Kinetiği ve Termodinamiği Davut LAÇİN1,*, Ayşegül BUDAK1, Ayşe Z. AROĞUZ1 İstanbul Üniversitesi, Mühendislik Fakültesi, Avcılar, Türkiye 34320 * Sorumlu yazar e-posta:
[email protected]
1
Özet Bu çalışmada, boyar madde kirliliğinin giderilmesinde adsorbent olarak, Biga Yarımadası (Kuzeybatı Anadolu), Soğucak Köyü civarından alınan halloysit kil minerali kullanılmıştır (Şekil1). Halloysit, fillosilikat minerali olup kaolin grubunda yer alan bir kildir. Tamamen hidrate formunda formülü Al2Si2O5(OH)4-2H2O’dır. Beyaz, turkuaz ve mavi renkli bir mineraldir. Doğal olarak elde edilen kil ince toz haline getirilerek sabit tartıma kadar kurutulmuştur. Metil-viyolet boyar maddenin, halloysit üzerindeki adsorpsiyon kinetiği ve termodinamiği çalışmalarında 0.5g adsorbent madde üzerinde 50ml metil-viyolet çözeltileri kullanılmıştır. Metil-viyolet suda yaşayan organizmalar için çok toksik olup, su ortamında olumsuz etkilere neden olmaktadır. Adsorpsiyon çalışmalarında, metil-viyolet stok çözeltisi, 1gL-1 olarak hazırlanarak 4 farklı derişime; 50ppm, 100ppm, 150ppm, 200ppm, seyreltilmiştir. Adsorpsiyon yüzdesi UV-spektrofotometrede 585nm dalga boyunda boyar madde çözeltilerinin absorbans değerleri ölçülerek hesaplanmıştır. Kinetik çalışmalar sabit sıcaklıkta (30oC) 4 farklı derişimde yapılmıştır. Adsorpsiyon termodinamiği dört farklı sıcaklıkta (30oC, 40oC, 50oC, 60oC) boyar madde derişimi (200ppm) sabit tutularak incelenmiştir. Yüzde adsorpsiyon 30oC’de ilk 6 saatte %92’ye ulaşırken 60oC’de %96 olarak bulunmuştur. Adsorpsiyonun endotermik olduğu ve kendiliğinden gerçekleştiği görülmüştür. Anahtar kelimeler: Halloysit, Kinetik, Termodinamik, Metil-viyolet.
218
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Adsorption Kinetics and Thermodynamics of Methyl-Violet Dye on Halloysite Davut LAÇİN1,*, Ayşegül BUDAK1, Ayşe Z. AROĞUZ1 1
Istanbul University, Engineering Faculty,, Avcilar, Turkey, 34320 * Responsible author e-mail:
[email protected]
Abstract In this study, halloysite type clay minerals taken from Sogucak Village, Biga Peninsula (Northwest Anatolia) were used as adsorbent in eliminating dye contamination (Figure 1). Halloysite is a phyllosilicate mineral and it is located within the kaolin group Its formula, in fully hyrated form is Al2Si2O5(OH)4-2H2O. It is a white, turquoise and blue colored mineral. The naturally obtained clay is pulverized into fine powder and dried until constant weight. In the adsorption kinetics and thermodynamics studies of the methyl-violet dye on halloysite, 50 ml of methyl-violet solutions were used on 0.5 g of adsorbent material. Methyl-violet is very toxic to aquatic organisms and causes negative effects in the aquatic environment. In the adsorption experiments, the methyl-violet stock solution was prepared as 1gL-1 and diluted with 4 different concentrations, 50ppm, 100ppm, 150ppm, 200ppm. The percentage of adsorption was calculated by measuring the absorbance values of the dye solutions at 585 nm wavelength using UV-spectrophotometer. Kinetic studies were carried out at 4 different concentrations at constant temperature (30°C). Adsorption thermodynamics were investigated at four different temperatures (30°C, 40°C, 50°C, 60°C) with constant solution concentration (200ppm). Percentage of adsorption reached 92% in the first 6 hours at 30°C and 96% at 60°C. It was seen that the adsorption process was endothermic and occurred spontaneously. Key words: Halloysite, Kinetic, Thermodynamic, Methyl-viyolet.
219
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Livestock Resources and Meat Sector in Republic of Benin: Perspectives for a Suitable Development Dehouegnon Jerry AGOSSOU1*, Youssouf TOUKOUROU2, Nazan KOLUMAN1 1
Department of Animal Science, Çukurova University, 01330, Adana Turkey 2 Faculty of Agriculture, University of Parakou, Benin *Responsible author e-mail:
[email protected]
Abstract This paper aims to examine livestock resource and meat sector in Republic of Benin. Specifically, it analyzes a) structure of livestock population, b) production system, c) meat production, importation, and consumption and d) obstacles and possible solution to increase the Republic of Benin meat production. Traditional animal production systems remain largely widespread. However, industrial and modern livestock farming systems for all species are developing. Cattle (57%), chicken (19%), small ruminants (SRs) (13%) and pigs (7%) are the main meat producers. However, non-conventional species such as rabbit (3%) and grass cutters (1%) contribute to the national meat production. Despite religious prohibitions, pork consumption increased notably during the last years in southern Benin. The households with a higher monthly income spend more money than poor households to purchase local animals' meat. Taste, texture, price, and juiciness are the main criteria of choice. Also, consumers prefer the meat of local breeds to that of exotic breeds. Thus local species and breeds will have a great role to play in the development of this sector. Although policies have been implemented to boost the national meat production, the sector is still undeveloped. That is why, the implementation of new approaches and practices including improvement of animals' genetic resources, housing, health care, and feeding should be developed to intensify production. Key words: Farm, animal, meat, Benin Republic.
220
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Goat Farming in Western African region: Opportunities, Challenges and Strategies for Sustainable Production Dehouegnon Jerry AGOSSOU1*, Tatiana Dominica DOUGBA2, Nazan KOLUMAN1 Department of Animal Science, Çukurova University, 01330, Adana Turkey Departement of Animal Science, University of Legon, P.O Box LG 25, Accra Ghana *Responsible author e-mail:
[email protected] 1
2
Abstract The West African region has a great diversity of indigenous goat breeds that are well adapted to such environmental conditions. West African goat population estimated nearly 150 million heads in 2014, represents 14.82% of world goat population. Goat play an important role in socio-economic, environmental and religious life of the farming communities in terms of income, payment of dowry and supplying food for the local population. Although goat industries have significantly increased these last decades, they are subjected to a variety of factors inhibiting their development. The major threats to the development of goat industry are: (i) the low genetic capacity of local goat breeds, (ii) the extensive production or management system which is still based on using of natural resource, (iii) the lack of animal health monitoring services, (iv) the non-existence of effective program for genetic improvement of local breeds, (v) the lack of governmental policies to support and develop the livestock sector especially for goat industry. For a sustainable development of West African livestock sector especially goat production with the goals of meeting the increasing demand for goat products, a wide intensification of goat production policies should be implemented. Basically the management system (housing, feeding, and health care) should be improved in goat farming. A good animal performances recording system should be implemented and kept for selection and improvement of breeds. Governments should provide funds to support research and enhance a great collaboration between researchers and farmers in order to valorize the results of studies. Governments should also limit the importation of animal products and financially and materially support farmers in order to boost local production. Key words: Goat farming, West Africa, Sustainable Production.
221
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sosyal Sürdürülebilirliğin Sağlanmasında Açık-Yeşil Alanların Rolü Demet DEMİROĞLU1*, A.Esra CENGİZ2, Aybike Ayfer KARADAĞ3 Kilis 7Aralık Üniversitesi Mühendislik-Mimarlık Fakültesi, Peyzaj Mimarlığı Bölümü, Kilis, Türkiye Çanakkale 18 Mart Üniversitesi Mimarlık-Tasarım Fakültesi, Peyzaj Mimarlığı Bölümü, Çanakkale, Türkiye 3 Düzce Üniversitesi Orman Fakültesi, Peyzaj Mimarlığı Bölümü, Düzce, Türkiye *Sorumlu yazar e-posta:
[email protected]
1 2
Özet 30 yılı aşkın bir süre önce tanımlanan sürdürülebilirlik kavramı yayınlanmasından bu yana (Brundtland raporu-1987), planlama, mimari ve kentsel tasarım ile ilgili önemli bir literatür sağlama bağlamında kentsel politika ve kalkınmayı konumlandırmak için önemli bir kavramsal çerçeve olarak yaygın olarak kabul edilmektedir. Açık yeşil alanların önemli rolleri sürdürülebilir kalkınmanın sosyal, ekonomik ve çevresel yönlerini oluşturmaktadır. Bu çalışmada, günümüzdeki literatüre dayanarak, açık ve yeşil alanların kentlerdeki sosyal sürdürülebilirliğe katkısı hakkında bilgi verilmiştir. Bu çalışmanın bir sonucu olarak, bu katkıların verimliliğini arttırma noktasında açık ve yeşil alanların planlanması için öneriler geliştirilmiştir. Anahtar kelimeler: Sosyal sürdürülebilirlik, Açık ve yeşil alanlar, Peyzaj Mimarlığı.
222
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Role of Open-Green Spaces in The Ensuring of Social Sustainability Demet DEMİROĞLU1*, A.Esra CENGİZ2, Aybike Ayfer KARADAĞ3 Kilis 7 Aralık University Faculty of Engineering and Architecture, Department of Landscape Architecture, Kilis, Turkey. 2 Çanakkale 18 Mart University Faculty of Architecture and Design, Department of Landscape Architecture, Çanakkale, Turkey. 3 Duzce University Faculty of Forestry, Department of Landscape Architecture, Düzce, Turkey *Responsible author e-mail:
[email protected]
1
Abstract Sustainability, first defined over 30 years ago, (since the publication of Brundtland report -1987), is widely accepted as an important conceptual framework within which to position urban policy and development, providing the context for a considerable literature on planning, architecture and urban design. The important roles played by open-green spaces are social, economic and environmental aspects of sustainable development. In this study, on the basis of current literature, information has been given about the contribution of open and green spaces to the social sustainability in the cities. As a result of this study, suggestions for the planning of open-green areas have been developed at the point of increasing the efficiency of these contributions. Key words: Social sustainability, Open-Green spaces, Landscape architecture.
223
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Recovery of Cr(VI) from Industrial Water with a Novel Calix[4]arene Based PIM Duygu ATAMAN1,*, Ahmet KAYA1, H. Korkmaz ALPOĞUZ1, Canan ONAC1 1
Pamukkale University, Denizli, Turkey *Responsible author e-mail:
[email protected]
Abstract In the present study, we have developed a basic, clean, fast, inexpensive, stable, recyclable, eco–friendly and highly efficient calix[4]arene based PIM membrane. Worldwide approximately 480,000 tons of chromium tannins are produced per year. Consequently, considering the chromium amounts produced in the world, it must be urgently controlled this compound because of its high toxicity. To this end it is really important to separate this toxic metal from chrome plating bath waters. The prepared PIM membrane was characterized by AFM, SEM. The kinetic results demonstrated that Cr(VI) can be transported from the chrome plating bath water to the acceptor phase with a high selective and efficiency. The transport efficiency of Cr(VI) using the polymer inclusion membrane was approximately 97.69%. The experimental results showed the prepared PIM can be used effectively for the removal of Cr(VI) from the industrial wastewater. The membrane had a long term of use due to its hydrophobicity and this is a big advantage in economically. Key words: Cr(VI), polymer inclusion membrane, calix[4]arene.
224
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Recycleable of Cr(VI) from Real Sample with a Macrocyclic Carrier through PIM Duygu ATAMAN1,*, Ahmet KAYA1, H. Korkmaz ALPOĞUZ1, Canan ONAC1 1
Pamukkale University, Denizli, Turkey *Responsible author e-mail:
[email protected]
Abstract In this study, a calixarene based polymer inclusion membrane was employed for the removal of Cr(VI) from chrome plating bath water. Chromium is the most toxic and mutagenic metal ion in biological systems and is used in many industrial applications. According to the World Health Organization (WHO), Cr(VI) is one of the most toxic metal in the nature. PIMs provide many advantages to researches such as a long term use, excellent stability and versatility, high selectivity, quick transport and the design of the membrane according to the required conditions. The transport efficiency of Cr(VI) using the polymer inclusion membrane was over 90%. The experimental results showed that the calix[4]arene had a great selectivity to Cr(VI) metal cation and the diffusion transport process can be also performed with a temperature. The developed calix[4]arene based PIM membrane has pretty good reusability for the removal of Cr(VI) from chrome plating bath water. The PIM membrane was stable, recyclable and showed excellent transport activity. Therefore, the PIM membrane can be used for the treatment of chrome plating bath water and the removal of heavy metals and organic pollutions from industries. Key words: Cr(VI), polymer inclusion membrane, calix[4]arene.
225
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Tekstil Endüstrisi Atıksuyundan NF-90 Membranı ile Kimyasal Oksijen İhtiyacı (KOİ) Gideriminin İncelenmesi Duygu KAVAK1,* 1
Eskişehir Osmangazi Üniversitesi, Mühendislik Mimarlık Fakültesi, Kimya Mühendisliği Bölümü, Meşelik/Eskişehir, Türkiye, *Sorumlu yazar e-posta:
[email protected]
Özet Nanofiltrasyon yöntemi atıksulardan kirletici giderimi için yaygın olarak kullanılan arıtma yöntemlerine göre birçok avantaja sahiptir. Bu avantajlar; kimyasal madde gereksinimine ihtiyaç olmaması, düşük enerji ihtiyacı, kullanım kolaylığı, yüksek arıtma verimi ve çevre dostu bir teknoloji olması olarak sıralanabilir. Bu çalışmada çapraz akış nanofiltrasyon yöntemiyle tekstil endüstrisi atıksuyundan KOİ giderimi araştırılmıştır. Membran deneyleri için çapraz akış nanofiltrasyon sistemi (SEPA CF, Sterlitech) kullanılmıştır. Bu sistem membran modülü, besleme tankı, basınç pompası, terazi, akış ölçer, bilgisayar, termostat ve gerekli bağlantı elemanlarından oluşmuştur. Çalışmada kullanılan NF-90 nanofiltrasyon membranı DOW FILMTEC firmasından elde edilmiştir. Deneylerde kullanılan atıksu ise Türkiyede faaliyet gösteren bir tekstil firmasından alınmıştır. Çalışmada besleme sıcaklığı (25 ve 35oC) ve membran basıncı (5, 10, ve 15 bar) gibi parametrelerin KOİ giderim verimleri üzerindeki etkileri incelenmiştir. Yapılan deneyler sonucunda NF-90 membranı için maksimum KOİ giderimi 15 bar basınç ve 350C besleme sıcaklığında %99 olarak elde edilmiştir. Anahtar kelimeler: Nanofiltrasyon, Tekstil atıksuyu, Çevre dostu teknoloji, NF-90, Kimyasal Oksijen İhtiyacı.
226
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Investigation of Chemical Oxygen Demand (COD) Removal with NF-90 Membrane from Textile Industry Wastewater Duygu KAVAK1,* Department of Chemical Engineering, Faculty of Engineering and Architecture, Eskişehir Osmangazi University, Meselik/Eskisehir, Turkey * Responsible author e-mail:
[email protected]
1
Abstract NF offers many more advantages such as, no need for adding any chemicals, lower energy consumption, higher rejection efficiency, and environmental friendliness compared to conventional treatment methods for removal of pollutants from wastewaters. In this study, cross-flow nanofiltration process has been investigated for removal of COD from textile industry wastewater. Membrane experiments were conducted in a cross-flow test system (SEPA CF, Sterlitech). This system is formed by a membrane module, a hydraulic hand pump, a feed tank, a high pressure pump, an analytical balance for the measurement of flux, a computer, a thermostat, a flowmeter, and other necessary fittings. The nanofltration membrane used in this study was a NF-90 membrane supplied by DOW FILMTEC company. The wastewater was supplied by Textile Industry in Turkey. The influence of operating parameters such as feed temperature (25 ve 350C) and transmembrane pressure (5, 10, and 15 bars) on the COD removal of NF-90 membrane, was investigated. The results indicate that the maximum COD removal was obtained as 99% at 15 bar and 350C for NF-90 membrane. Key words: Nanofiltration, Textile industry wastewater, Environment-friendly technology, NF-90, Chemical Oxygen Demand.
227
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Nanofiltrasyon Yöntemiyle Mobilya Endüstrisi Atıksuyundan Kimyasal Oksijen İhtiyacı (KOİ) Giderimi Duygu KAVAK1,* 1
Eskişehir Osmangazi Üniversitesi, Mühendislik Mimarlık Fakültesi, Kimya Mühendisliği Bölümü, Meşelik/Eskişehir, Türkiye *Sorumlu yazar e-posta:
[email protected]
Özet Günümüzde meydana gelen teknolojik ve endüstriyel gelişmeler beraberinde hızla artan çevre kirliliği sorununu da getirmiştir. Endüstriyel alanda kullanılan bazı kimyasallardan oluşan atıklar tüm yaşam alanlarının kirlenmesine neden olmakta ve çevre kirliliği hızla artmaktadır. Bu kirlilik sorunu en başta insan olmak üzere tüm canlıların yaşamını tehdit etmektedir. Mobilya endüstrisinde genellikle boyama ve vernikleme üniteleri sonucunda elde edilen atıksular boyar madde ve Kimyasal oksijen ihtiyacı (KOİ) içermektedir. Boya ve KOİ içeren atıksuların arıtılmasında adsorpsiyon, iyon değişimi, membran yöntemler, kimyasal oksidasyon, koagülasyon/flokülasyon, elektrokoagülasyon/flotasyon ve biosorpsiyon gibi yöntemler kullanılabilir. Günümüzde membran yöntemler kullanılarak atıksuların arıtılması hem ekonomik hem de etkili bir yöntem olarak karşımıza çıkmaktadır. Günümüzden 30-40 yıl öncesine kadar membran prosesleri az bilinmekteydi. Bugün ise Amerikan Çevre Koruma Teşkilatı (EPA) tarafından en iyi arıtma teknolojilerinden biri olarak tanımlanmaktadır. Bu çalışmada çapraz akış nanofiltrasyon yöntemiyle mobilya endüstrisi atıksuyundan KOİ giderimi araştırılmıştır. Deneylerde NF-90 nanofiltrasyon membranı kullanılmıştır. KOİ giderim verimleri üzerine besleme sıcaklığı (25 ve 350C) ve membran basıncı (2, 6, ve 10 bar) gibi parametrelerin etkileri incelenmiştir. Deneyler sonucunda NF-90 membranı için maksimum KOİ giderimi 10 bar basınç ve 350C besleme sıcaklığında %92,2 olarak elde edilmiştir. Anahtar kelimeler: Nanofiltrasyon, Mobilya atıksuyu, NF-90, Kimyasal oksijen ihtiyacı.
228
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Removal of Chemical Oxygen Demand (COD) from Furnıture Industry Wastewater by Nanofiltration Method Duygu KAVAK1,* Department of Chemical Engineering, Faculty of Engineering and Architecture, Eskişehir Osmangazi University, 26480, Meselik/Eskisehir, Turkey * Responsible author e-mail:
[email protected]
1
Abstract The technological and industrial developments that have taken place today have brought about the rapidly increasing environmental pollution problem. Wastes from some chemicals used in the industrial area cause pollution of all living areas and environmental pollution is increasing rapidly. This pollution problem threatens the lives of all living beings, primarily humans. In the furniture industry the wastewater usually obtained as a result of painting and varnishing units contains chemical oxygen demand (COD). Methods such as adsorption, ion exchange, membrane methods, chemical oxidation, coagulation / flocculation, electrocoagulation / flotation and biosorption can be used in the treatment of wastewater containing paint and COD. Today, purification of wastewater by using membrane methods is an economical and effective method. Until 30-40 years ago, membrane processes were little known. Today it is defined as one of the best treatment technologies by the American Environmental Protection Agency (EPA). In this study, COD removal from furniture industry wastewater was investigated by crossflow nanofiltration method. NF-90 nanofiltration membranes were used in the experiments. The effects of parameters such as feed temperature (25 and 350C) and membrane pressure (2, 6, and 10 bar) on COD removal efficiencies were investigated. As a result of experiments, maximum COD removal for NF-90 membrane was obtained as 92.2% at 10 bar pressure and 350C feed temperature. Key words: Nanofiltration, Furniture industry wastewater, NF-90, Chemical Oxygen Demand.
229
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürdürülebilirlik Kapsamında Rüzgar Türbinlerinin Yapı Kabuğuna Strüktürel Entegrasyonu Duygu KURTOĞLU1,*, Gökhan OFLAZ2, Mehmet Akif Ersoy Üniversitesi, Mühendislik-Mimarlık Fakültesi, Mimarlık Bölümü, Burdur, Türkiye Mehmet Akif Ersoy Üniversitesi, Mühendislik-Mimarlık Fakültesi, Mimarlık Bölümü, Burdur, Türkiye *Sorumlu yazar e-posta:
[email protected]
1 2
Özet Küresel ısınmanın son yıllarda dünyanın gündemindeki önemli tartışmaların başında gelmesiyle, birçok disiplinde olduğu gibi, mimarlıkta da bu konuyla ilgili önlem almaya yönelik çalışmalar yürütülmekte olup, sürdürülebilir bir çevre için temiz enerji arayışı içine girilmiştir. Sera gazı emilimini azaltarak sürdürülebilirlik gelişimine katkı sağlayan faktörlerden biri olması dolayısıyla yenilenebilir enerji kaynaklarından olan rüzgar enerjisine yönelim artmış, görsel ve işlevsel mimari tasarım öğesi olarak kullanımı ivme kazanmıştır. Gelişen teknolojiler sonucunda, harcadığı enerjinin yalnızca küçük bir kısmını üretebilen aerodinamik şekilde tasarlanmış binalar, günümüzde yerini yüksek katlı yapılarda rüzgar hızını arttırıcı ve rüzgar türbinlerinin kullanılmasına olanak sağlayan özellikte aerodinamik kanallı formlara bırakmaktadır. Rüzgar türbinleri entegre edilmiş cepheler ile bina içerisinde gereksinim duyulan enerjinin büyük bir kısmını üretip depolayabilen, ve aynı zamanda görsel olarak da tasarımın bir parçası rolünü üstlenen yapılara örnekler gün geçtikçe çoğalmaktadır. Bu makalede, rüzgar enerjisi ile kendi enerjisini üreten ve depolayan binalar, tasarım stratejileri, sistem avantaj ve dezavantajları üzerinde durularak detaylı bir şekilde incelenecektir. Enerji bakımdan dışa bağımlı olmayan yapılar ile sürdürülebilir mimariye dikkat çekilecek, böylelikle ham madde sıkıntısının yaşanmadığı coğrafyalarda farkındalık sağlanarak küresel ısınmanın önüne geçilmeye çalışılacaktır. Ayrıca temiz bir enerji çeşidi olması nedeniyle yapılı çevrede insan sağlığının, konforunun ve ekolojik dengenin, kısacası canlı geleceğinin korunmasına yönelik katkıda bulunması amaçlanmaktadır. Anahtar kelimeler: Sürdürülebilirlik, yenilenebilir enerji, rüzgar enerjisi.
230
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Structural Integration of Wind Turbines in the Construction Shell in the Context of Sustainability Duygu KURTOĞLU1,*, Gökhan OFLAZ2, 1
Mehmet Akif Ersoy University, Faculty of Engineering and Architecture, Department of Architecture, Burdur, TURKEY 2 Mehmet Akif Ersoy University, Faculty of Engineering and Architecture, Department of Architecture, Burdur, TURKEY *Responsible auther e-mail:
[email protected]
Abstract In recent years, because of global warming being one of the important discussions on the agenda of the world, just as in many disciplines, studies are being carried out to take precaution related to the issue in architecture and the search of clean energy for a sustainable environment has been undertaken. Tendency of using wind energy from renewable energy sources has increased, thereby one of the factors contributing to sustainability development by reducing greenhouse gas emissions, and its use as a visual and functional architectural design element has accelerated. As a result of the developing technologies, the aerodynamically designed buildings, which can produce only a small part of the energy they are spending, nowadays leave their place to aerodynamic channel forms, which in particular are capable of increasing the wind speed and enabling the use of wind turbines in high-rise buildings. With wind turbine integrated façades, examples of constructing which can produce and store most of the energy required in the building and moreover, constructive examples that assume the role of visualization as part of design are increasing gradually. In this article, wind energy will be examined in detail, focusing on buildings, design strategies, system advantages and disadvantages of producing and storing their own energy. Sustainable architecture will draw attention with structures that are not dependent on external energy from energy. Thus, ensuring awareness in the geographies where raw material problems are not experienced and trying to prevent global warming. It is also aimed at contributing to the protection of human health, comfort and ecological balance, in brief, the preservation of the living future in the built environment due to the fact that it is a clean energy type. Key words: Sustainability, renewable energy, wind energy.
231
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Starch: As a Water Permeable Green Membrane Gülsen ASMAN1,*, Ebru KONDOLOT SOLAK2,*, Sinem PAKIR3 1,3
Gazi University, Faculty of Science, Department of Chemistry, Ankara, Turkey Gazi University, Technical Sciences Vocational School, Department of Chemistry and Chemical Processing Technologies, Ankara, Turkey *Responsible author e-mail:
[email protected]
2
Abstract It is all the more critical that increased water use by humans reduces the amount of water available for industrial and agricultural development. By the way water recovery studies can provide additional water for productive and environmental purposes. However such studies should be environmentally friendly and green processes. Membrane separation processes are energy saving processes and requires simple processes for the separation; therefore most of them can serve as green processes. In this study a water selective membrane was tried to be prepared by using green polymers and for this aim membrane was prepared by using simple corn starch. However the physical resistance of the starch membrane was found as weak. To increase its resistance poly (vinyl alcohol) (PVA), which is a biologically compatible polymer, was used as a supporting material for the membrane. For the water permeation studies evapomeation method was preferred as a membrane process and the effects of membrane thickness, starch to PVA ratio and temperature on the selectivity of the starch membrane were all studied. Additionally, the type of the starch (wheat, potato and corn) on the selectivity of water was also studied. As a result of the study it was concluded that corn starch membrane can be used as a water selective membrane among the studied membranes. Key words: Green chemistry, green membrane,water, evapomeation.
232
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Theophylline Release from Ethyl Cellulose Coated PVP/NaCMC Microspheres Ebru KONDOLOT SOLAK1,*, Gülsen ASMAN2, Nurcan Çiçek KIRKAYAK3 1,3
Gazi University, Technical Sciences Vocational School, Department of Chemistry and Chemical Processing Technologies, Ankara, Turkey 2 Gazi University, Faculty of Science, Department of Chemistry, Ankara, Turkey *Responsible author e-mail:
[email protected]
Abstract Theophylline (TF) is a famous drug for its anti-inflammatory and anticarcinogenic effect and it is used for obstructive respiratory disorders and asthma as bronchodilator. Since it has narrow therapeutic range, its usage remains in restricted dose range. For this reason, it is important to obtain prolonged or controlled drug delivery. In this study, microspheres were prepared from poy(vinyl pyrrolidone) (PVP)/sodium carboxymethyl cellulose (NaCMC) matrix and were coated with ethyl cellulose (EC). NaCMC is a polysaccharide and a nontoxic and biodegradable polymer which is used in controlled release systems, and can be easily dissolved in aqueous solutions. PVP is soluble in water and other polar solvents. When dry it is a light flaky powder, which readily absorbs up to 18% of its weight in atmospheric water. EC is a derivative of cellulose in which some of the hydroxyl groups on the repeating glucose units are converted into ethyl ether groups. It is a water-insoluble polymer. In this study, prepared polymer films were characterized by fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC) and scanning electron microscopy (SEM). The effect of the film thickness on the release of TF was investigated at pH 5.5 and 37 0C. It was determined that the release of TF decreased with the increase in film thickness. Key words: Theophylline, controlled release, polymer film, microspheres, biocompatible polymers.
233
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Vermikompost Teknolijisinde Rivo’s Hasat Sistemi Ve Avantajları Ece ÇAKTÜ1,*, Güler CEBBAR1, Özlem AKYOL1, Korkmaz BELLİTÜRK2 1
Riverm Kompost Vermikompost Tarım Hayvancılık Makine San. Ve Tic. Ltd. Şti., Süleymanpaşa-Tekirdağ, Turkey 2 Namık Kemal Üniversitesi, Ziraat Fakültesi, Toprak Bilimi ve Bitki Besleme Bölümü, SüleymanpaşaTekirdağ, Turkey *Sorumlu yazar e-posta:
[email protected]
Özet Dünya çapında bakıldığında birçok ülkede yıllardır üretimi yapılan vermikompostun ülkemizde modernize edilerek daha iyi koşullarda ve kaliteli üretimi için hasat sistemi geliştirilmiştir. Bu hasat sistemi “Rivo’s Hasat Sistemi” olarak adlandırılmakta olup, üretimi Tekirdağ’da yapılmaktadır. Sektörde çok çeşitli hasat sistemleri olsa da, Rivo’s Hasat Sistemi sahip olduğu birçok avantajlara ilaveten müşteri memnuniyeti, ekonomik iş gücü sağlaması, işçi sayısını azaltması, sağlamlık, ergonomiklik vs. gibi özellikleri ile diğerlerinin önüne geçmiş ve kullanımı giderek artma eğilimine girmiştir. Bu hasat sistemi üretimi kolaylaştırması ile birlikte birçok kişi için de yeni iş imkânı sağlamaktadır. Bu şekilde modern hasat sistemlerinin üretilmesi neticesinde sektör açısından yeni tesis kurulumlarına yönelimler başlamış olup, ülkemizde oluşturduğu istihdama katkıları açısından da önem taşımaktadır. Bu çalışmada tesis kurulumu için gerekli bazı koşullar, iş planlaması ve üretimde kullanılan solucanların bazı biyolojik özelliklerinden de bahsedilmektedir. Bu gibi sistemler ile birlikte tarımsal girdilerden olan kimyasal gübrelerin zamanla kullanımı azalacak ve gübreleme programlarında vermikompost olarak adlandırılan solucan gübreleri de yer alarak topraklar hem ihtiyacı olan besin maddelerince zenginleştirilecek ve hem de bu gübrenin kullanılması neticesinde ıslah edilerek sürdürülebilir tarımsal üretime önemli pozitif katkılar sağlanacaktır. Anahtar kelimeler: Solucan, vermikompost, organik gübre, Rivo’s Hasat Sistemi.
234
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Rivo’s Harvesting System And Advantages In Vermicompost Technology Ece ÇAKTÜ1,*, Güler CEBBAR1, Özlem AKYOL1, Korkmaz BELLİTÜRK2 Riverm Compost Vermicompost Company, Süleymanpaşa-Tekirdağ, Turkey Namık Kemal University, Faculty of Agriculture, Department of Soil Science and Plant Nutrition, Süleymanpaşa-Tekirdağ, Turkey *Responsible author e-mail:
[email protected] 1
2
Abstract We have modernized vermicompost production which has been produced in many countries for many years around the world, and developed the harvesting system for better conditions and quality. This harvesting system is called "Rivo’s Harvesting System" and its production is done in Tekirdağ city. Although there are a lot of harvesting systems in the industry, the Rivo’s Harvesting System has many advantages, including customer satisfaction, economic labour force, laying off, strength, ergonomics, etc. with the characteristics get ahead of other and usage is increasing day by day. This harvesting system provides ease of production and new jobs for many people. As a result of the production of modern harvesting systems in this way, trends towards new factory installations have started in terms of the sector and it is also important for the contribution of employment in our country. In this study, some of the conditions necessary for plant installation, work planning and some biological features of worms used in production are mentioned. With such systems, the use of chemical fertilizers as agricultural inputs will be reduced over time, and the soil will be enriched in both nutrients needed and fertilized on the basis of the use of this fertilizer to provide significant positive contributions to sustainable agricultural production, including worm fertilizer called vermicompost in fertilization programs. Key words: Earthworm, vermicompost, organic fertilizer, Rivo’s Harvest System.
235
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
ASPB’nin Engellilere Yönelik Politika ve Hizmetlerinin Engelli Bireylerin Refahının Sürdürülmesi Açısından Değerlendirilmesi Edip AYGÜLER1,*, Hakan SAKARYA2 Hacettepe Üniversitesi, Sosyal Hizmet Bölümü, Ankara, Türkiye Celal Bayar Üniversitesi Sosyal Hizmet Bölümü, Manisa, Türkiye *Sorumlu yazar e-posta:
[email protected]
1 2
Özet Engelli; doğumdan itibaren ya da sonradan herhangi bir sebepten dolayı zihinsel, ruhsal, bedensel ve sosyal becerilerin değişen oranlarda kaybedilmesinden ötürü toplumsal yaşama uyum sorunları yaşayabilen ve temel günlük ihtiyaçlarını karşılamada zorluk yaşayan kişidir. Korunma, bakım, danışmanlık, eğitim ve sağlık hizmetlerine ihtiyaç duyar. Engellilik vücutta ortaya çıktığı yere göre türlere ayrılmaktadır. Aile ve Sosyal Politikalar Bakanlığı’nın 2014 yılında yayınladığı verilere göre ülkemizde yaklaşık 1.8 milyon engelli birey bulunmaktadır. Cinsiyete göre sınıflandırıldığında engelli bireylerin yaklaşık 1 milyonunu erkekler oluşturmaktadır. Yaşa göre sınıflama yapıldığında engelli bireylerin büyük bir kısmı 15-35 yaş aralığında bulunmaktadır. Engellilik oranına göre sınıflamaya gidildiğinde yaklaşık 310 bin kişi ile %90-100 arasında engellik oranına sahip bireyler ilk sırada yer almaktadır. Süreğen hastalıklara sahip bireylerin oluşturduğu engelli grubu yaklaşık 950 bin kişiyle en büyük grubu oluşturmaktadır (ASPB: 2014). Nitekim toplumun önemli bir kısmı tarafından engellilik gizlenecek kötü bir şey olarak görüldüğünden bu verilerin gerçekte olduğundan daha düşük olduğu düşünülmektedir. Engelli bireyler, engelliliklerinden ötürü bir takım dezavantajlarla karşılaşırlar. Bu noktada engelli bireylerin temel hak ve özgürlüklerden faydalanmalarını sağlamak, toplumsal hayata ve süreçlere etkin katılımlarını teşvik etmek, engellilik durumlarından kaynaklanan olumsuzluklar yaşamalarını engellemek 5378 sayılı Kanun’la devletin görevi olarak belirlenmiştir. Bu kanun kapsamında, engellilerin insan onuruna yakışır şekilde yaşama hakkı olduğu ve engellerinden dolayı ayrımcılığa maruz kalamayacağına yer verilmiştir. Engelli bireylerle toplumun geri kalanı arasında kaynaklara ulaşmada, sosyal yaşamda, iş yaşamında ve diğer tüm toplumsal alanlarda fırsat eşitliği sağlanmasının esas olduğu söylenmiştir. Engellilere yönelik hizmetlerin oluşturulması ve yürütülmesi için Aile ve Sosyal Politikalar Bakanlığı (ASPB) başta olmak üzere çeşitli bakanlıklar görevlendirilmiştir. Engellilere yönelik, onların sahip olduğu dezavantajı ortadan kaldırmak için ASPB çeşitli politika ve hizmetler üretmiştir. Evde bakım aylığı, engelli aylığı, kamu ve özel sektördeki işverenler için belirli bir kota dâhilinde engelli personel istihdam etme zorunluluğu, engelliler için ücretsiz ulaşım kartları, engellilere vergisiz otomobil alma imkânı ve gelir vergisi indirimi bakanlığın diğer kamu kurum ve kuruluşlarıyla işbirliğinden doğan hizmetlerin bazılarıdır. Engelli bireyler için üretilen politika ve hizmetler detaylı incelendiğinde, bunların engellileri daha çok kısıtlı da olsa ekonomik açıdan koruma altına almaya yönelik 236
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
hizmetler olduğu görülecektir. Engellerin toplumsal süreçlere, etkinliklere ve yaşama tam katılımlarının hedeflenmediği anlaşılacaktır. Bireyin refahı sadece ekonomiyle değil, aynı zamanda yaşamın bütünüyle alakalı olduğundan, engellilerin refahını sürdürülebilir şekilde arttıracak yeni politika ve hizmetlerin oluşturulması gerekmektedir. Söz konusu bildiriyle bu doğrultuda üretilebilecek hizmetler için öneriler sunulmaya çalışılacaktır. Anahtar kelimeler: Engellilik, Engelli refahı, Engelli politikaları, Sosyal hizmet.
237
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Assessment of ASPB's Policy and Services for Disabled Persons in Terms of Sustaniable Welfare of Disabled Persons Edip AYGÜLER1,*, Hakan SAKARYA 2 1 2
Hacettepe University. Department of Social Work, Ankara, Turkey Celal Bayar University Department of Social Work, Manisa, Turkey *Responsible author e-mail:
[email protected]
Abstract Disabled; is a person who may experience difficulties in adapting to social life and have difficulties in meeting basic daily needs because of the loss of mental, spiritual, physical and social skills from birth or later for any reason. Disabled person needs protection, care, counseling, education and health assistance. Disability is divided into species according to where it arise in the body. According to data which published by the Ministry of Family and Social Policies in 2014, there are approximately 1.8 million disabled people in our country. When classified according to sex, approximately 1 million of disabled people constitute males. When classified according to age, most of disabled people are in the age range of 15-35 years. When it is classified according to the disability rate, disabled who have %90-100 disability rate, approximately 310 thousand people, are in the first place. The disabled group formed by individuals with convalescent diseases constitutes the largest group with approximately 950 thousand people (ASPB: 2014). As a matter of fact, it is thought that this data is lower than the fact that disability is seen as a bad thing to be concealed by an big part of the society. Disabled people face a number of disadvantages due to their disability. At this point, it has been determined as the duty of the state with Law No. 5378 to ensure that disabled people benefit from basic rights and freedoms, to encourage their active participation in social life and processes, and to prevent the negativity caused by their disability. This law stipulates that people with disabilities are entitled to life worthy of human dignity and that they can not be discriminated against because of their disabilities. It is said that it is essential to achieve equality of opportunity between disabled people and the rest of society such as in accessing to resource, in social life, in work life and in all other social areas, Several ministries, including the Ministry of Family and Social Policies (ASPB), have been appointed to establish and implement services for disabled. ASPB has produced a variety of policies and services for disabled to address the disadvantages which they have becaues of disability. Home care fee, disability fee, the obligation to employ disabled people in a certain quota for the public and private sector employers, free transportation cards for the disabled, the possibility of obtaining tax free vehicles for the disabled and the income tax relief are some of the services that come from the cooperation of the ministry with other public institutions and foundations. When the policies and services produced for disabled individuals are examined in detail, it will be seen that these services are for the economic protection of the disabled even if limited extent. It will understood that these services and policies are not aimed at 238
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
full participation of disabled in social processes, activities and life. As the welfare of the individual is not only related to the economy but also to whole life, it is necessary to establish new policies and services that will increase the prosperity of the disabled in a sustainable way. In this study, suggestions for services that can be produced in this direction will be tried to be made. Key words: Disability, Disabled welfare, Disabled politicies, Social work.
239
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürdürülebilir Kalkınma Sürecinde Kalkınma Ajanslarının Rolü: İZKA Örneği Elif Ayşe ŞAHİN İPEK1,*, Melih KABAYEL2 İzmir Kâtip Çelebi Üniversitesi, İzmir, Türkiye İzmir Kâtip Çelebi Üniversitesi, İzmir, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2
Özet Sürdürülebilir kalkınma; bugünkü neslin ihtiyaçlarını gelecek nesillerin kendi ihtiyaçlarını karşılama yeteneğini tehlikeye atmadan karşılamayı amaçlayan bir kalkınma anlayışıdır. Sürdürülebilirlik, insan yaşamının gereksinimleri ve doğal kaynakların mevcudiyeti arasında bir denge kurarak, ekonomik, çevresel ve toplumsal boyutlarıyla bugünden geleceğe uyumlu bir planlama ve programlama yapılmasını gerektiren bütünsel bir yaklaşımdır. Bir sürdürülebilir kalkınma modelinin ekonomik büyüme ve gelişmeye yön verecek şekilde uygulanması bölgesel kaynakların ve unsurların bunu desteklemesi durumunda etkili olabilecektir. Bu paradigma değişimi ile dünyada önemi artan bölgesel kalkınma anlayışı Türkiye’de ancak 2000’li yılların ikinci yarısından itibaren işlevsel hale gelebilmiş, 2006 yılından itibaren mali yönetimin yeni aktörleri olarak bölgesel kalkınma ajansları kurulmuştur. Kalkınma ajansları, ekonomik ve sosyal işlevlerini tamamlayıcı şekilde sürdürülebilir kalkınma konusunda da belirgin bir rol üstlenmekte ve çeşitli araçlarla sürece destek vermektedir. Bu çalışmanın amacı kalkınma ajanslarının sürdürülebilir kalkınmanın sağlanmasına yönelik politika oluşturma süreçlerinin ve proje desteklerinin analiz edilmesidir. Bu amaçla bölgesel politika metinleri, sürdürülebilir kalkınma ve ilişkili konuları içeren projelerin desteklenme oranı ve mali destek programlarının sağladığı toplam fon miktarı içinde bu türden projelere sağlanan fonların oranları ele alınacaktır. Değerlendirmenin yapılmasında, Türkiye’de ilk kurulan kalkınma ajansı olması dolayısıyla İzmir Kalkınma Ajansı (İZKA) örneğinden hareket edilecektir. Çalışma sonucunda kalkınma ajanslarının sürdürülebilir kalkınmayı sağlamadaki etkinliği değerlendirilecektir. Bu değerlendirmenin ardından etkinlik/etkinsizliğin kaynağı kalkınma ajanslarının politika oluşturma süreçleri açısından ele alınacaktır. Anahtar kelimeler: Kalkınma Ajansı, Sürdürülebilir Kalkınma, Kamu Mali Yönetimi.
240
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Role of Development Agencies in the Sustainable Development Process: The Case of İZKA Elif Ayşe ŞAHİN İPEK1,*, Melih KABAYEL2 İzmir Kâtip Çelebi Üniversitesi, İzmir, Türkiye İzmir Kâtip Çelebi Üniversitesi, İzmir, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2
Abstract Sustainable development is a development approach that aims to meet the needs of today’s generation without jeopardizing the ability of future generations to meet their own needs. Sustainability is a holistic approach with economic, environmental and social dimensions that requires planning and programming to establish a balance between needs of human life and the availability of natural resources that is compatible with. The application of a sustainable development model to economic growth and development may be effective if regional resources and elements support it. With this paradigm shift, the understanding of regional development, which is increasing in importance in the World, could become functional in Turkey only from the second half of the year 2000 and since 2006, regional development agencies have been established as new actors in public financial management. Development agencies, in addition to their economic and social functions, play a specific role in sustainable development and support the process through various means. The purpose of this study is to analyze policy making processes and Project supports to ensure sustainable development of development agencies. To this end, the rate of support for projects involving regional policy texts, sustainable development and related issues, and the total amount of funding provided by financial support programs will be addressed. The evaluation will be based on the example of the Izmir Development Agency because it is the first development agency in Turkey. As a result of the study, the effectiveness of development agencies in achieving sustainable development will be assessed. Following this assessment, the source of effectiveness/inefficiency will be addresses in terms of policy making process of development agencies. Key words: Development Agency, Sustainable Development, Public Financial Management.
241
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Kıyı Mimari Kimliğinin Sürdürülebilirliği: Gemlik Elif BULUT1,*, Murat TAŞ2 Uludağ Üniversitesi,Bursa, Türkiye Uludağ Üniversitesi,Bursa, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2
Özet Tarih boyunca büyük öneme sahip olan kıyı alanları, konumu gereği, kendine özgü bir mimari kimliğe sahiptir. Belli dönemlerde yaşanan, dünya veya ülke çapındaki kırılma dönemlerinden, kıyı alanları da etilenmiş ve kıyı mimari kimliği değişime uğramıştır. Bu değişimler ile birlikte kıyı; yeni bir kimlik kazanmış, yeni kültür değerleri oluşmuştur. Kıyı mimari kimliğini oluşturan bazı parametreler vardır. Bu parametrelerin neler olduğu, bir kıyı kenti olan Bursa iline bağlı Gemlik ilçesi üzerinden incelenmiştir. Gemlik ilçesine ait kıyı mimari kimliği parametrelerinin, bu ilçe şartları doğrultusunda nasıl sürdürülebilir olacağı ele alınan konular arasındadır. Bir kentin; coğrafik özelliğinden dolayı kıyı kenti kimliğine sahip olmasının yanında, tarihi ve kültürel değerlerinin oluşması, süreç gerektiren ve devam eden bir olgudur. Tarihi ve kültürel miras sayılan kıyı mimarisinin korunması için, sürdürülebilir politikalar geliştirilmelidir. Örneğin bir kıyı bandında ihtiyaç sebebiyle yapılacak dolgu alan çalışması, kıyının morfolojisinden siluetine kadar her şeyi etkileyecektir. Ancak varolan bir kıyı kültürünün olması ve bu olguyu kaybetmemesi gerektiği dikkate alınırsa, o zaman bu çözüm için sürdürülebilir kıyı anlayışından bahsedilebilir. Coğrafi konumundan dolayı farklı kullananım amaçlarına sahip olan Gemlik kıyılarında ise, nitelikli mimari kimliğin sürdürülebilirliği olumsuz etkilenmektedir. Sürdürebilirliği etkileyen bu unsurların neler olduğu ve sebepleri, bu çalışmada incelenmiştir. Sürdürülebilirlik kavramı; Gemlik ilçesinin sahip olduğu etmenler üzerinden, kıyı mimari kimliğinin belirlenmesi, korunması ve geliştirilmesi ile ilgili çalışmalar boyutunda ele alınmıştır. Anahtar kelimeler: Kıyı Mimarisi,Mimari Kimlik,Sürdürülebilirlik.
242
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Sustainability Of Coastal Architectural Identity: Gemlik Elif BULUT1,*, Murat TAŞ2 Uludağ University,Bursa,Turkey Uludağ University,Bursa,Turkey *Responsible author e-mail:
[email protected] 1
2
Abstract Coastal areas have a unique architectural identity because of geographical location which are more important throughout history. Experienced in certain periods, coastal areas have been affected by World-wide/ the countrywide during break-up eras and coastal architectural identity is altered. New cultural values have arised from coastal areas because of these variations. The coastal architectural identity contains some parameters which are analysed being founded on Gemlik where is coastal town of Bursa. Coastal identity parameters in Gemlik are defined depending on districts conditions and also ’’ how can these parameters be sustainable’’ topic is explained. In addition to having a coastal city identity because of its geographical feature, the formation of historical and cultural values is an ongoing and continuing process. Sustainable policy should be developed for the protection of the coastal architecture which also historical and cultural heritage. For instance, the study of the filling field in a shoreline due to need will affect everything from the morphology of the coast to its silhouette. However, if it is taken into account that there is an existing coastal culture and that this phenomenon should not be lost, then this solution can be referred to as a sustainable coastal approach. On the other hand Gemlik coast have different intended purposes so it is adversely affected the sustainability of qualified architectural identity. These factors affecting the sustainability and what these reasosns have been investigated in this study. Sustainability term has been dealt with by studies on the identification, conservation and development of coastal architectural identity based on factors that Gemlik county has. Key words: Coastal Architecture,Architectural Identity,Sustainability.
243
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
İstanbul’daki Konaklama Yapılarının Yatak Odası Kitlelerinin Yönlenme Kararlarının AnaliziSürdürülebilir Turizm AçısındanDoç. Dr. Funda ÖZTÜRK KERESTECİOĞLU 1, Yüksek Lisans Öğrencisi Mimar Elif BÜYÜKEKİZ ŞİMŞEK2,* Yıldız Teknik Üniversitesi/Mimarlık Bölümü, İstanbul, Türkiye Yıldız Teknik Üniversitesi/Mimarlık Bölümü, İstanbul, Türkiye *Sorumlu yazar e-posta:
[email protected]
1 2
Özet İstanbul Antalya’dan sonra Türkiye’deki ikinci büyük ve önemli turizm destinasyonudur. 2015 yılında 12.414.677 turist İstanbul’u ziyaret etmiş tir, toplam yatak kapasitesi 143.782’dir. Konaklama yapılarının yatak kitlelerinin yönlenmesini oluş turan kararlar; tesisin ekonomik açıdan karlılığını, kaynakların sürdürülebilir kullanımını ve sürdürülebilir turizmi (manzaraya yönelme ve enerji tasarrufu) etkiler. Çalış manın amacı; otel yatak kitlelerinin yönlenme kararlarının araş tırılması, örneklem 20 otelin yönlenme kararlarına göre analiz edilip analizlerin tablolaş tırılmasıdır. Analiz yöntemi: •
• •
•
İstanbul’daki tüm otellerin (5,4,3,2,1 yıldızlı ve belediye belgeli) yerlerinin gösterimini sağlayan haritalar alındı. Haritadan İstanbul ilçelerinde kaç otel olduğu bilgisine ulaş ıldı. Oteller kültür üçgeninde [Enlil, Z., Dinçer, İ, Evren, Y. ve Seçkin, E., Istanbul’da Kültür Turizmi İçin Yenilikçi Stratejiler, 1. Baskı. İstanbul Bilgi Üniversitesi Yayınları, İstanbul, 2011.] ve tarihi yarımadada yoğunlaş maktadır.
Konumlarına, türlerine, yönelimlerine ve manzarayla kurdukları iliş kilere göre, kriterlerden en az birini sağlayacak ş ekilde 20 otel seçildi.
Seçilen 20 otel için noktasal olarak satın alınan rüzgar haritaları, otellerin yatak odası kitlelerinin cephelerini etkileyen hakim rüzgar yönlerinin belirlenmesinde, yatak kitleleri cephelerine gelen rüzgar hızlarının belirlenmesinde, birbirlerine göre karş ılaş tırılmasında ve mevsimlere göre yılın kaç günü, kaç km/s hızla, hangi yönden rüzgar estiği bilgisine ulaş ılmasında kullanıldı.
Yönlenme kararları araş tırıldı. 3 baş lıkta incelendi; klimatik, çevresel, yönetsel ve oteller baş lıklara göre incelenip bulunan sonuçlar tablolaş tırıldı.
Çalış ma İstanbul’daki 20 otelin yatak kitlesinin yönlenme kararlarını; ısıtma-soğutma yüklerini yönlenme yolu ile düş ürülmesi açısından analiz etmiş tir. Yatak kitlelerini manzaraya yöneltmek ve ısıtma-soğutma yüklerini yönlenme ile düş ürmek için özellikle yazın rüzgar alan, kış ın ve baharda güneş alan bina yüzeylerini oluş turmak tesisin ekonomik karlılığını ve kaynakların sürdürülebilir kullanımını etkileyen veridir. Yatak kitlesi yönlenme kararları klimatik (ısıtma-soğutma yükü, rüzgar), çevresel (aktivite 244
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
bölgeleri, manzara kısıtları, fiyat politikaları, gölgeleme elemanlarının yeri) ve yönetmelikler olmak üzere 3 ana baş lıkta toplandı. Baş lıklar altında oluş turulan yönlenmeyi etkileyen kararlar bir tablo halinde sunuldu. Tabloda seçilen 20 otelin yatak kitlesinin yönlenme durumu; hangi tasarım kararına, hangi kritere bağlı olarak ne kadar gerçekleş tirdiğini göstermektedir. Bu çalışma Yıldız Teknik Üniversitesi Bilimsel Araştırma Projeleri Koordinasyon Birimince desteklenmiştir. Proje numarası: 2016-03-01-YL03. Anahtar kelimeler: İstanbul, otel, rüzgar, güneş , manzara, cephe, otel odası, kitle, konaklama yapıları, enerji tasarrufu, sürdürülebilir turizm
245
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Analysis of Orientation of Bedroom Masses in Accommodation Buildings in İstanbul - From the Sustainable Tourism Point of ViewAssoc. Prof. Dr. Funda ÖZTÜRK KERESTECİOĞLU1, Graduate Student Architect Elif BÜYÜKEKİZ ŞİMŞEK2,* 1 2
Yıldız Technical University/Department of Architecture, İstanbul, Turkey Yıldız Technical University/Department of Architecture, İstanbul, Turkey *Responsible author e-mail:
[email protected]
Abstract İstanbul is the second largest and important tourism destination after Antalya in Turkey. 12,414,677 tourists visited İstanbul, whose total bed amount was 143,782 in 2015. The decisions that are composing the orientation of accommodation buildings affect the profitability of the facilities, use of sustainability of the resources and sustainable tourism (orientation to view and energy saving). The purpose of study is to scrutinize the decisions, which have been made for the orientation of the bed masses, and to analyze orientation decisions by way of twenty sample hotels and to tabulate analysis. Methods and materials:
Maps showing all hotels in İstanbul have been obtained. Number of hotels in each province of İstanbul has been obtained. The results indicate that the hotels are concentrated in the culture triangle [Enlil, Z., Dinçer, İ, Evren, Y. and Seçkin, E., Istanbul’da Kültür Turizmi İçin Yenilikçi Stratejiler, 1st ed. Istanbul Bilgi University Press, Istanbul, 2011.] and the historical peninsula. Twenty sample hotels have been selected considering the location, type, orientation and relation with view criteria. Particular wind maps for the selected hotels have been used for identification of dominant wind, speed of wind for each season and direction thereof, which affects the bedroom masses. Orientation decisions have been reviewed under climatic, environmental and regulative titles and the result been tabulated.
In the study, twenty hotels’ bed mass orientation decisions have been analyzed in respect of decreasing the heating-cooling loads by way of orientation. Orientation of building façade, windward in summer and sunward in winter, is very important for the profitability of a facility and sustainability of the resources. Bed mass orientation decisions have been classified under three main titles, which are climatic (heating-cooling loads, wind), environmental (activity zone, view restriction, pricing policies, location of shading elements) and regulative titles and tabulated 246
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
accordingly. Bed mass orientations of twenty sample hotels, in the table, have been examined in detail as per the aforementioned design-related decisions. This work was supported by Research Fund of the Yildiz Technical University. Project Number: 2016-03-01-YL03. Key words: Sustainable tourism, hotels, wind, sun, view, elevation, İstanbul, accommodation building, energy saving, hotel room, orientation
247
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
İlköğretim Öğrencilerinde Çevre Bilincinin Geliştirilmesi Elif ÖZMETİN1,*, Elif ÇALGAN1, Yeliz SÜZEN1,Feyza GÖNÜL1, Tugay AYYILDIZ1, Gamze ARSLAN1 Balıkesir Üniversitesi, Balıkesir, Türkiye Balıkesir Üniversitesi, Balıkesir, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2
Özet Günümüzde ortaya çıkan çevre sorunlarının en önemli nedeni toplumumuzun yeteri kadar bilinçlendirilmemiş olmasıdır. Bu konuda yapılması gereken, geleceğin büyükleri olan çocuklarımızın bilgilendirilmesi ve bilinçlendirilmesidir. Nüfusun hızla çoğalması, çarpık kentleşme, atıkların bilinçsizce çevreye saçılması, hava, su, toprak gibi çevre faktörlerini kirletmekte; doğal kaynakların israf edilmesi ve eğitimsizlik de doğal dengenin bozulma sürecini hızlandırmaktadır. İşte tam bu noktada çevre eğitimi önem kazanmaktadır. Çevre eğitiminde temel amaç; doğal çevreyi koruma ve kullanmaya yönelik duyarlılığı artırmak, bireyde çevre bilinci uyandırmaktır. Çevre eğitimi ailede başlayıp, hayat boyu devam edecek olan bir süreçtir. Çevre eğitiminde en önemli yapılanma ise şüphesiz ki ilköğretim yıllarında gerçekleşmektedir. Bu yıllarda sınıf ortamında öğrencilere çevre bilincinin kazandırılması ve kazandırılan bilincin kalıcı olabilmesi için öğretmenlerin derslerde özellikle öğrencilerin ilgisini çekici yöntem ve tekniklere başvurması gerekmektedir. Çalışmamız, Balıkesir ili merkezinde bulunan Hasan Basri Çantay İlköğretim Okulu ve Yarış Ortaokulu’ nda gerçekleştirilmiştir. Öncelikle öğrencilerin çevre bilinç ve bilgilerini ölçen bir ön anket çalışması yapılmış, sonrasında, Çevre Mühendisleri tarafından öğrencilere bilinçlendirme eğitimi verilip, eğitim sonrası anket çalışmasıyla da öğrencilerin çevreye bakış açılarının ne ölçüde değiştiği çeşitli grafiklerle tespit edilmiştir. Bu çalışmalar sonucunda çevre eğitiminin ve bilinçlendirmesinin küçük yaşlardan başlayarak kişilere aşılanmasının, çevreye karşı daha duyarlı ve çevre bilincine hakim bir toplum olma yolunda daha etkin bir yöntem olduğu ortaya konulmuştur. Anahtar kelimeler: Çevre Eğitimi, Çevre Bilinci Kazandırma, Çevre Koruma, Çevre Duyarlılığı.
248
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Development of Environmental Consciousness in Primary School Students Elif ÖZMETİN1,*, Elif ÇALGAN1, Yeliz SÜZEN1, Feyza GÖNÜL1, Tugay AYYILDIZ1, Gamze ARSLAN1 1
Balikesir University, Balikesir, Turkey *Responsible author e-mail:
[email protected]
Abstract The most important cause of the environmental problems that have arisen today is unconscious society. What needs to be done in this regard is the informing and raising awareness of our children who are the elders of the future. Rapid proliferation of the population, crooked urbanization, unconscious waste disposal, polluting environmental factors such as air, water and soil; waste of natural resources and lack of education are accelerating the process of deterioration of natural equilibrium. At this point, environmental education is gaining importance. The main objective in environmental education is; to increase awareness of conservation and use of the natural environment and to raise environmental awareness in the individual. Environmental education is a process that starts at the family and continues for life. The most important structure in environmental education is undoubtedly realized in primary school years. In these years, in order to gain environmental consciousness to the students in the classroom environment and the consciousness to be earned, it is necessary for the teachers to apply methods and techniques which are especially interesting to the students in the lessons. Our work was carried out in Hasan Basri Çantay Elementary School and Yarış Secondary School located in Balikesir province center. First, a preliminary questionnaire survey was conducted to measure the environmental consciousness and knowledge of the students. Afterwards, awareness training was given to the students by Environmental Engineers, and after the training questionnaire study, various graphs were used to determine how the perceptions of the students changed. As a result of these studies, it is envisaged that an education and awareness-raising activity on the environment will be started from a young age and an important step will be taken towards having a society that is more sensitive to the environment and conscious of the environment. Key words: Environmental Education, Recognition of Environmental Awareness, Environmental Protection, Environmental Responsibility.
249
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Bor Endüstrisi Atıksularından Karışık Reçine ile Bor ve Sertlik Giderimi Elif ÖZMETİN1, Cengiz ÖZMETİN1,*, Elif ÇALGAN1,Habibe KIZILDAĞ1, Sümeyye YILDIZ1, Selda ÖKSÜZ1 Balıkesir Üniversitesi, Balıkesir, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
Özet Bor mineral ve bileşikleri, günümüzde kullanılmakta olan pek çok malzemenin üretimine girmekte ve gelişmekte olan teknoloji içinde çok önemli bir yer almaktadır. Bor minerali, cam–seramik endüstrisi, temizleme beyazlatma endüstrisi, tarım, yanmayı önleyici maddeler, metalurji endüstrisi, nükleer endüstrisi, tekstil endüstrisi ve diğer birçok alanda kullanıma sahiptir. Ancak, çevre ve sağlık açısından bakıldığında sınır değerlerin üzerine çıkıldığında toksik etkisi başlamakta ve yaşamı olumsuz etkilemektedir. Sularda sertlik ise +2 değerlikli katyonlardan kaynaklanmakta olup yüksek konsantrasyonlarda olması, sıcak su borularında, ısıtıcılarda, kazanlarda, membranlarda kireç birikimi ve taşlaşma gibi problemlere yol açmaktadır. Tüm bu sebeplerle bu tür suların deşarj edilmeden önce arıtılmaları gerekmektedir. Balıkesir ilimizde bulunan Bigadiç Etimaden Bor İşletmeciliği’ nde açık ocakların taban suları ve yıkama öğütme işlemlerinde kullanılan atık sular yüksek miktarda bor ve sertlik içermektedir. Bu atık sular Çamköy atık barajında biriktirilmektedir. Çalışmamız Çamköy atık su barajından alınan numunelerde gerçekleştirilmiştir. Arıtma materyali olarak MB-115 karışık reçinesinden faydalanılmıştır. Karışık reçine seçilerek aynı anda sertlik ve bor giderimi hedeflenmiştir. Atıksuyun başlangıç bor konsantrasyonu 666 mgB/L ve toplam sertlik konsantrasyonu ise 750 mgCaCO3/L’dir. Çalışma parametreleri olarak reçine dozajı, sıcaklık ve zaman seçilerek, sertlik ve bor için giderim verimleriyle birlikte tutma kapasitesi (q) değerleri bulunmuştur. Farklı çalışma koşullarında %100 oranında sertlik ve bor giderim yüzdelerine ulaşılmıştır. Anahtar kelimeler: Bor, sertlik, karışık reçine.
250
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Boron and Hardness Removal from Boron Industry Wastewater by Mixed Bed Resin Elif ÖZMETİN1, Cengiz ÖZMETİN1,*, Elif ÇALGAN1,Habibe KIZILDAĞ1, Sümeyye YILDIZ1, Selda ÖKSÜZ1 Balikesir Üniversitesi, Balikesir,Turkey *Responsible author e-mail:
[email protected] 1
Abstract Boron minerals and their compounds are involved in the production of many materials used today and they are very important in developing technology. It uses boron mineral, glass-ceramic industry, cleaning whitening industry, agriculture, fire prevention materials, metallurgy industry, nuclear industry, textile industry and many other areas. However, from the point of view of the environment and health, toxic effects are started and the life is adversely affected when the limit values are exceeded. Hardness in the water is caused by cations with a valence of +2 and the presence of high concentrations leads to problems such as lime accumulation and calcification in hot water pipes, heaters, boilers, membranes. For this reason, these kinds of waters need to be purified before they are discharged. Bigadiç Etimaden Boron Enterprise, located in Balıkesir province, contains high amounts of boron and hardness in the ground waters of open quarries and waste waters used in washing and milling operations. These waste waters are collected in Çamköy waste dam. Our study was carried out in samples taken from Çamköy waste water dam. MB-115 mixed resin was used as the treatment material. By selecting mixed resin, hardness and boron removal are targeted at the same time. The initial boron concentration of the wastewater is 666 mgB / L and the total hardness concentration is 750 mg CaCO3 / L. Key words: Boron, Hardness, Mixed Bed Resin.
251
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürdürülebilir Ve Yaşanabilir Kentler İnşa Sürecinde Kentsel Dönüşüm Projelerinin Analizi: Bursa Kenti Örneği Elif Karakurt Tosun1,* Uludağ Üniversitesi, Emlak ve Emlak Yönetimi, SBMYO, Bursa, Türkiye * Sorumlu yazar e-posta:
[email protected]
1
Özet Kentsel dönüşüm kavramı, kentsel sorunlara çözüm üretmek amacıyla, değişime uğrayan bir bölgenin ekonomik, fiziksel, sosyal ve çevresel koşullarına kalıcı bir çözüm sağlamaya çalışan kapsamlı bir vizyon ve eylem olarak ifade edilmektedir. Temel amacı, çöküntü bölgesi haline gelen yerleşim alanlarının rehabilite edilerek bu bölgede yaşayan bireylerin yaşam kalitelerinin yükseltilmesini sağlamaktır. Kentsel dönüşüm uygulamaları ilk olarak, 19. yüzyılda Avrupa’da düşük gelir gruplarının kötü ekonomik ve fiziksel şartlarda yaşadıkları ve sosyal dayanışmanın kaybolduğu konut alanlarında, eski boş liman ve sanayi bölgelerinde kentin ekonomik gelişimine katkıda bulunacak projelerin uygulanması biçiminde olmuştur. Özellikle, 2. Dünya Savaşı’nda yakılıp yıkılmış kentlerin yenilenmesi, zarar görmüş kültür mirasının onarılması, ekonomik çöküntüye uğramış alanların yeni fonksiyonlarla canlandırılması zorunluluğu, kentsel dönüşüm kavramını ortaya koymuştur. Türkiye’de ise 1980’lerden sonra gündeme gelen kentsel dönüşüm projeleri; kullanılmaz hale gelmiş tarihi doku bölgelerinde, çöküntü alanları ve ıslah – imar planları ile dönüşümü sağlanamamış gecekondu alanlarının sağlıklaştırılması şeklinde uygulanmıştır. 2012 yılında kabul edilen 6306 sayılı kanundan sonra ise Türkiye’deki kentsel dönüşüm çalışmaları, gecekondu bölgeleri dışında kentin merkezi konumunda rant değeri yüksek olan fakat riskli olarak nitelendirilen konut bölgelerinde de uygulanmaya başlanmıştır. Gerek Türkiye’de gerek dünyanın çeşitli ülkelerinde yürütülen kentsel dönüşüm projelerinin uygulanması sürecinde çeşitli sorunlarla karşılaşılmaktadır. Bunlar şu şekilde özetlenebilir:
Kentsel dönüşüm olgusunun sadece mekânsal dönüşüm olarak algılanması, Kentsel mekanda birbirinden bağımsız ve kopuk parçaların oluşması, Kentsel kimliğin devamlılığının sağlanması ilkesinin gözetilmemesi, Kentsel dönüşüm projelerinin ihtiyaç alanlarında değil, rant alanlarının dönüşümünde kullanılması.
Bu çalışmanın hedefi; kentin eskiyen ve sosyal – ekonomik – fiziksel – mekânsal olarak çöküntüye uğramış bölgelerinde yaşam kalitesini yükselterek güvenli yaşam alanları oluşturması amacıyla hazırlanan kentsel dönüşüm projelerinin bu hedeflerine ne oranda ulaştıklarının veya bu amaca ulaşabilme yolunda gerçekleştirilen çalışmaların neler olduğunun eleştirel bir gözle analiz edilmesidir. Bu çerçevede çalışmayı yönlendiren temel değişken; 6306 sayılı Afet Riski Altındaki Alanların Dönüştürülmesi Hakkındaki Kanunun sunmuş olduğu çerçeve olacaktır. Çalışmanın mekânsal izdüşümü ise, Türkiye’nin dördüncü büyük kenti olan Bursa olacaktır. 2012 yılında kabul edilen 6306 sayılı kanun ile Bursa’da geniş çaplı bir kentsel dönüşüm çalışması başlamıştır. Bursa’da gerek inşaat şirketlerinin kentte yürüttüğü dönüşüm çalışmalarında gerek yerel yönetimlerin koordinasyonunda gerçekleştirilen dönüşüm çalışmalarında sürecin nasıl işlediği, halkın bu süreç içindeki rolünün ne olduğu irdelenecektir. Kentte gerçekleştirilen 252
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
çalışmaların mekânsal olarak izlenebilirliğini kolaylaştırabilmek amacıyla kent haritası üzerinde işaretlemeler yapılarak kentsel dönüşüm çalışmalarının kapsamı – uygulama yöntemleri bölgesel bazda ayrı ayrı ele alınacaktır. Çalışmanın son bölümünde ise, Bursa’da gerçekleştirilen kentsel dönüşüm çalışmalarının sürdürülebilir, güvenli ve kaliteli yaşam mekânları oluşturma temel hedefine ulaşma yönünde ne oranda başarıya ulaştıkları/ ulaşacakları ayrıntılı olarak analiz edilecektir. Çalışmanın belirtilen hedeflere ulaşabilmesi için, nitel araştırma yöntemleri kullanılacaktır. Bu çerçevede betimleme yaklaşımı Bursa kentindeki kentsel dönüşüm çalışmalarının mekânsal dağılımı, hedef alınan nüfus – yapı yoğunluğunu ortaya koyma sürecinde; gözlem metodu ise kentteki kentsel dönüşüm çalışmalarının fiziksel yansımalarının analizinde ve örnek olay incelemesi tekniği ise kentin farklı bölgelerinde gerçekleştirilen kentsel dönüşüm çalışmalarından seçilecek uygulamaların irdelenmesi sürecinde kullanılacaktır. Anahtar kelimeler: Kentsel dönüşüm, sürdürülebilirlik, yaşam kalitesi, kentsel rant, Bursa.
253
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Analysis Of The Urban Transformation Projects During Construction Of Sustainable And Habitable Cities: Example Of The City Of Bursa Elif Karakurt Tosun1,* 1
Uludağ University, Estate and Estate Management, SBMYO, Bursa, Turkey * Sorumlu yazar e-posta:
[email protected]
Abstract The concept of urban transformation is expressed as a comprehensive vision and action trying to provide a permanent solution to the economic, physical, social and environmental conditions of a changed region with aim of generating solutions for urban problems. The main aim is to rehabilitate the settlement areas which have become collapse zones and ensure raising the life qualities of the individuals living in these areas. The urban transformation applications initially occured in Europe in the 19th century as the implementations of the projects which would contribute to the economic development of the city in the housing areas where the low income groups lived and sicial solidarity vanished, in the old, abandoned ports and industrial regions. In particular, renewal of the burnt down and destroyed cities, the obligation of reviving the economically collapsed areas with new functions, restoration of the damaged cultural heritage during the 2nd World War have presented the concept of urban transformation. The urban transformation projects which have come to agenda in Turkey after 1980s have been implemented in the regions with historical texture which has become unavaillable as the rehabilitation of the slum areas of which transformation could not have been achieved with the improvement - reconstruction plans. The urban transformation activities in Turkey, after the law number 6306 which was adopted in 2012, has also started to be implemented in the residential areas which are in the central location of the city away from the slum areas, defined as being of high profit but risky. Various problems have been encountered in the implementation process of urban transformation projects conducted both in Turkey and in various countries of the world. These can be summarized as follows:
Perceiving the urban transformation phenomenon as only a spatial transformation, Occurance of the parts which are independent and seperated from each other in the urban space, Preserving the principle of ensuring the continuity of urban identity, Using the urban transformation projects in the transformation of the profit areas, not in areas of need.
The goal of this study is to make an analysis with critical eye of to what extent the urban transformation projects prepared with the aim of building safe living spaces by raising the quality of life in the old and socially - economically - physically - spatially collapsed regions have achived these aims or what the activities carried out in the path of achieving these aims are. The basic variable to direct the study in this framework will be the framework provided by the law number 6306, the Law Concerning the Transformation of Areas Under Disaster Risks. The spatial projection of the study will be Bursa which is the fourth largest city of Turkey. With the law number 6306 adopted in 2012, a large-scale urban transformation work has started in Bursa. How the process works both in the 254
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
transformation activities that the construction companies performs and in the transformation activities carried out with the coordination of the local administrations and what the role of the people in this process is in Bursa will be examined. The scope application methods of the urban transformation works will be handled on a regional basis by making markings on the city map in order to facilitate the spatially traceability of the works carried out in the city. In the last part of the study, to what extent the urban transformation works carried out in Bursa have been/will be successful in the path of reaching the main objective of establishing sustainable, safe and quality living spaces will be analyzed in detail. Qualitative research methods will be used so that the study can achieve the stated objectives. Within this framework, the descriptive approach will be used in the process of revealing the distribution of the urban transformation works, population-building density in Bursa; the observation method will be used in the analysis of the physical reflections of the urban transformation works in the city; and the case study technique will be used in the examination of the applications to be selected from the urban trnsformation works carried out in different regions of the city. Key words: Urban transformation projects, sustainability, life quality, urban rent, Bursa.
255
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Examination Of The Slow City Formations in The Context Of Turkey As An Alternative Modal For Sustainable And Inhabitable Life Areas Elif KARAKURT TOSUN1,* 1
Urbanization and Environmental Politics in Uludag University, Bursa, TURKEY, * Responsible author e-mail:
[email protected]
Abstract “Slow movement” which opposes to the process of dedifferentiation created by globalization and the logic of consumer society, protests against local identity being smoothed and melted in an upper pot, therefore objects to the concept homogenization, draws considerable interest on the international level. Slow movement which emerged as a reaction to fast-food diet forms the basis of a movement which is defined as “slow urbanization” in the urbanization literature today. Cittaslow Association is an international association which is attended by cities that do not wish to become one of the homogenous places created by globalization, but wish to take place on the world scene by protecting their local identities and features. Philosophy of slow urbanization supports calm-peaceful daily life emphasizing to the ‘moment’ being lived; aims at sustaining traditional food culture which is composed of healthy, clean and local products and accepts improving the relationship between local people in principle. The principles which slow movement dwell on influences improvement and protection of life quality of people living on that settlement. Therefore there is a strong relationship between slow urbanization movement and urban life quality. The main purpose of this study is to analyze the cities defined as slow cities as an extension of the slow movement in Turkey with the interaction between the slow urbanization movement and the phenomenon of life quality. In this way, it will be examined whether the slow life and slow cities can be accepted as an alternative way of life in the 21st century when the population living in the cities rapidly increases and the big cities determine the spatial geography. Firstly, the concept of life quality and the components that make up this concept will be discussed in order to reveal how and in which processes the slow urbanization movement affects the life quality of the city. In the second part of the study, the slow urbanization movement, the process of the emergence of this movement and the criteria of slow urbanization movement will be analyzed. Finally, in the study, the formation of the slow movement in Turkey, the conditions for a city to be able to enter the slow movement, the slow cities in the country and their economic - ecological - cultural characteristics will be examined separately. In order to achieve the targets set out in the study, the economic-ecologicalcultural characteristics of the slow cities in Turkey and the quality of life in these cities will be analyzed comparatively within context of the problematic of life quality in these cities by using the quantitative analysis methods after revealing the objectives of the slow movement and the characteristics of the global slow cities by way of description. Consequently, in case of adoption of the the slow urbanization movement by espaecially the city administration and the individual in our country and in the world, the problamatic of whether the 21st century individual will be able to achieve the possibility of taking advantage of the alternative of quality, healthy and calm life apart from the daily 256
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
life which is shaped under the pressure of overpopulation-chaos-traffic-urban crimes experienced in the big cities will be elaborated. Key words: Slow movement, slow city, Sustainable living spaces, Turkey.
257
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Kompleks Koaservasyon Yöntemi İle Bepanthen-Bemiks-E Vitamini-Badem Yağı Karışımı İçeren Mikrokapsül Üretimi Elif KÖKSAL1,*, Fethiye GÖDE2 Süleyman Demirel Üniversitesi, Fen Bilimleri Enstitüsü, Kimya ABD, Isparta, Türkiye Süleyman Demirel Üniversitesi, Fen Edebiyat Fakültesi, Kimya Bölümü, Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2
Özet Son yıllarda katı partiküller ve sıvıların kaplanması için çeşitli metotlar yayınlanmaktadır. Mikrokapsülleme işlemi de bu metotlar arasında yer almaktadır. Mikrokapsülleme, sıvı ya da katı partikül ya da damlacıklarının polimer bir film malzemesi ile kaplanması işlemidir. Bu işlem ile elde edilen ürün mikrokapsüller olarak adlandırılır. Mikrokapsüller küresel şekillidir ve etrafında homojenik duvar bulunur. Genel olarak mikro kapsüllerin, iki bileşeni bulunur: Çekirdek malzemesi ve duvar ya da kabuk materyali. Mikrokapsül içerisindeki madde veya karışım çekirdek malzemesi olarak adlandırılır, duvar kısmı ise kabuk ya da kaplama malzemesi olarak adlandırılır. Mikrokapsüller, kontrollü salınım, geliştirilmiş ısı ve oksidatif kararlılık, reaktif uyumsuzlukların ayrılması, düşük uçuculuk/ yanıcılık/ toksisite, sıvıların katılara dönüştürülmesi ve akışkanlığın geliştirilmesi gibi işlevleri sağlar. Etken maddeleri dış etkilerden koruma özelliği sayesinde de özellikle kozmetik alanında kullanımına yönelik çalışmalar yapılmaktadır. E vitamini, bepanthen ve bemiks temel vücut fonksiyonları için gerekli olan güçlü etkilere sahiptir. Her biri hücrelerin yenilenmesi, cilt sağlığı yönünden antiseptik özellikleri barındırmaktadır. Badem yağı da içerdiği zengin vitaminler sayesinde kozmetik alanında sıklıkla kullanılan yağlardan biridir. Bu çalışmada, Bepanthen- Bemiks- E vitamini- Badem yağı karışımı içerikli mikrokapsüller, jelatin ve arap zamkı polimer karışımları kullanılarak kompleks koaservasyon yöntemi ile hazırlanmıştır. Bu çalışmanın temel amacı, kozmetik alanında kullanımı için mikrokapsül üretim çalışması yapmaktır. Emülsiyonu oluşturmak için yüzey aktif madde olarak SDS (Sodyum Deodesil Sülfat) ve mikrokapsül duvarına çözünmezlik kazandırmak için çapraz bağlayıcı olarak gluteraldehit duvar materyallerine eklenmiştir. Mikrokapsüllerin morfolojisi taramalı elektron mikroskobu (SEM) ve optik mikroskop ile karakterize edilmiştir. Ek olarak, mikrokapsülasyonu açıklamak ve kimyasal yapısını araştırmak için Fourier dönüşümü kızılötesi spektroskopi (FT-IR) ile analiz edilmiştir. Anahtar kelimeler: Mikrokapsül, Kompleks Koaservasyon, Bepanthen, Bemiks, E Vitamini, Badem Yağı.
258
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Production Of Microcapsule Containing Bepanthen -BemiksVitamin E-Almond Oil Mixture By Complex Coacervation Method Elif KÖKSAL1,*, Fethiye GÖDE 2 1
Suleyman Demirel University, Graduate School of Applied and Natural Sciences, Department of Chemistry ABD, Isparta, Turkey 2 Suleyman Demirel University, Faculty of Arts and Sciences, Department of Chemistry, Isparta, Turkey *Responsible author e-mail:
[email protected]
Abstract Several methods are published for the coating of solid particles and liquid in recent years. The microencapsulation process is also included in these methods. Microencapsulation is a process by which droplets or particles of liquid or solid material are coated with a film of polymeric material. The product obtained by this process is called as microcapsule. Microcapsules consist of a polymeric wall and thereof the liquid trapped in the wall. Microcapsules are spherical in shape and are located around a homogeneous wall. Generally microcapsules consist of two components: Core material and Wall or Shell material. The substance or mixture contained in microcapsules is referred to as the core material and the wall is called a shell or coating material. The capsules provide such functions as controlled release, improved heat and oxidative stability, separation of reactive incompatibles, reduced volatility/ flammability/ toxicitiy, conversion of liquids to solids and improved flowability. Active ingredient are external influences protection feature, especially for use in cosmetics. Vitamin E, bepanthen and bemiks have powerful effects that is essential for basic bodily functions. Each one provides a refreshing cells and has antiseptic properties. Almond oil is one of the oils that are frequently used in the field of cosmetics thanks to the contains rich vitamins. In this study, microcapsules containing Bepanthen-Bemiks-Vitamin E-Almond Oil mixtures as core material were prepared from gelatin and gum arabic by complex coaservation method. The main purpose of this work is production microcapsules to provide for use in cosmetic. To form the emulsion sodium dodecyl sulfate (SDS) as a surfactant is used and glutaraldehyde as crosslinker was added to wall materials to impart insolubility property to the microcapsule wall. The surface morphology of the tocopherol microcapsules were evaluated by scanning electron microscopy (SEM) and optical microscopy. Fourier transformation infrared spectroscopy (FT-IR) analysis was carried out to explain the microencapsulation and investigate the microcapsule chemical structure. Key words: Microcapsule, Complex Coacervation, Bepanthen, Bemiks, Vitamin E, Almond Oil.
259
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Karatay Medresesi Kapsamında Tarihi Süreçteki Sürdürülebilirlik Elif Merve YILMAZ1,*, Mine ULUSOY2 Selçuk Üniversitesi, Konya, Türkiye Selçuk Üniversitesi, Konya, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2
Özet Selçuklu İmparatorluğu yüzyıllar boyunca Anadolu’da hükümdarlık sürdürmüş ve kendi izlerini taşıyan birçok eser bırakmıştır. Konya ise yaklaşık 300 yıl Selçuklu İmparatorluğu’na başkentlik yapmış olması sebebiyle tarihi mirasın en çok bulunduğu kentlerden biridir. Konya’daki Selçuklu eserleri oldukça iyi korunmuş ve sürekliliği sağlanmıştır. Selçuklu mimarisine bakıldığında kendine has bir karakteristiğe sahip ve özgün bir mimari görülmektedir. Konya’daki Karatay Medresesi bu eserlerin en önemlileri arasındadır. 1251’de Celaleddin Karatay tarafından inşa ettirilen ve dönemin en ünlü din adamlarının yetiştirildiği medrese, günümüzde çini eserleri müzesi olarak kullanılmaktadır. Medrese dışardan bakıldığında kareye yakın bir dikdörtgen algısı oluşturmaktadır. Taç kapısı alışılmışın dışında, yapının merkezi ekseninde değildir. Taş işçiliğinin en güzel örneklerinden biri olan taç kapı birçok seyahatname yazarı tarafından övgüyle kaleme alınmıştır. İçerisinde de özenli bir işçilik mevcuttur, 800 yıl öncesinden kalan süslemeler ve çiniler ziyaret edenleri kendine hayran bırakmaktadır. Konya’nın en değerli tarihi eserlerinden biri olarak değerlendirilen taç kapısıyla, süslemeleriyle ve kentteki görünüşüyle yıllarca süregelmiş olan Karatay Medresesi’nin tarihsel açıdan sürdürülebilirliğinin sağlanması oldukça önemlidir Bu çalışmada, medresenin geçmişten bugüne geçirdiği değişiklikler, koruma kararları, dönemlere göre yenileme ve restorasyon çalışmaları analizi yapılmıştır. İlk tasarlandığı zamanlardan günümüze kadar korunarak ve önemini yitirmeden geldiği belirlenmiştir. Geçmiş yıllarda yapılan restorasyonlar, bazı değişimleri de göz önüne koymaktadır. İlerleyen dönemlerde yapılacak çalışmalarda belge niteliğini taşıyan bir çalışmanın oluşturulması amaçlanmıştır. Anahtar kelimeler: Selçuklu mirası, Karatay Medresesi, tarihsel sürdürülebilirlik.
260
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sustainability in the Historical Process: The Case of Karatay Madrasah Elif Merve YILMAZ1,*, Mine ULUSOY2 Selçuk University, Konya, Turkey Selçuk University, Konya, Turkey *Responsible author e-mail:
[email protected] 1 2
Abstract The Seljuk Empire continued its reign in Anatolia for centuries and left many traces of its own. Konya is one of the cities with the most historical heritage due to the fact that it was the capital of the Seljuk Empire for 300 years. Seljuk monuments in Konya have been preserved well and maintained. When Seljuk architecture is looked upon, it has original architecture with unique characteristic. Karatay Madrasah in Konya is among the most important of these Works. The madrasah, in which the most famous clericals of the period were raised, was built by Celaleddin Karatay in 1251 and is used as a museum of tile works in the present day. The madrasah creates a rectangular algebra close to square when viewed from the outside. The grown door is one of the most beautiful example of stone workmanship, has been received praise by many travel writers. There is also a careful craftsmanship in the interior, the ornaments and china that remained 800 years ago are fascinating to visitors. It is very important to ensure the historical sustainability of the Karatay Madrasah, which has been preserved for many years with the grown gate, ornaments and the appearance in the city, which are considered as one of the most valuable historical monuments of Konya. In this study, the madrasah have been analyzed from the past to today, including changes, preservation decisions, renovation and restoration according to periods. It has been determined that it has been well preserved and without losing its importance from the first time it was designed. The restorations made in the past years also indicate some changes. It is aimed to establish a work which carries a document quality in this work to guide in the following periods. Key words: Seljuk heritage, Karatay Madrasah, historical sustainability.
261
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Odunpazarı Evlerinin Kültürel Miras Açısından Değerlendirilmesi: Şakirler Sokak Örneği Elif Merve YILMAZ1,*, Mine ULUSOY2 Selçuk Üniversitesi, Konya, Türkiye Selçuk Üniversitesi, Konya, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2
Özet İnsanoğlu ilk çağlardan beri barınma ihtiyacını karşılamak için çeşitli yöntemler geliştirmiş, çadırdan toplu konuta kadar birçok aşamadan geçilmiştir. Kentlerin içinde de konutlar için belli bölgeler ayrılmış, bu bölgelerde kentlinin birlikte yaşaması için imkanlar sağlanmıştır. Odunpazarı, Eskişehir’in ilk konut yerleşim bölgesidir. Şehrin güneyinden kuzeyine doğru yayılan bölge, 1896’da Eskişehir için hazırlanan Türk tarihinin ilk modern haritasında da görülmektedir. İlk planlandığında uzun süre şehrin merkezi olmasına rağmen zaman geçtikçe kent merkezi olma özelliğini yitirmiştir fakat konutların yerleşimi, sokak dokuları, kentin kültürünü anlatan özel bir yer olmasından dolayı önemini yitirmemiştir. Günümüzde sit alanı olarak ilan edilen ve korumaya alınan Odunpazarı, her yıl binlerce turist ağırlamaktadır. Bölgede yeni binaların inşa edilmesi yasaklandığından yalnızca belli kurallarla, eski konutlar restorasyonu yapılarak kullanılmaktadır. Bölgedeki bazı konutlar konaklama ve ticaret amaçlarıyla kullanılmak için de restore edilmiştir. Bu çalışmada, Odunpazarı bölgesinden seçilen bir sokağın analizi yapılmıştır. Şakirler Sokak, bölgenin batısında yer alan ve üzerinde onüç adet konut bulunduran bir sokak dokusuna sahiptir. Ana aksa direk bağlantısı olmasa da turistler bu sokak üzerinden de sıklıkla geçmektedir. Konutlar herhangi bir işlevsel dönüşüm geçirmemiştir ve hala konut olarak kullanılmaktadır. Kültürel mirasın sürdürülebilirliği açısından bu alandaki sokak dokularının, konut planlarının ve cephe tipolojilerinin her yönden incelenmesi ve analiz edilmesi gerekliliği, çalışmanın kapsamını belirlemiştir. Çalışma sonucunda, sokakta bulunan konut morfolojileri grafikler halinde anlatılmıştır, ayrıca konutların birbirleriyle ilişkileri de irdelenmiştir. Anahtar kelimeler: Odunpazarı evleri, Şakirler Sokak, kültürel miras.
262
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Evaluation of Odunpazarı Houses in Terms of Cultural Heritage: The Case of Şakirler Street Elif Merve YILMAZ1,*, Mine ULUSOY2 Selçuk University, Konya, Turkey Selçuk University, Konya, Turkey *Responsible author e-mail:
[email protected] 1
2
Abstract Human beings have developed various methods to meet the need for dwelling since the earliest times, as many steps have been passed from the tent to residence. Within the cities there are also certain areas for housing in which the facilities for living together are provided. Odunpazarı is the first residental area of Eskişehir. The area spreads from the south to the north of the city is also seen in the first modern map of Turkish history that was prepared for Eskişehir in 1896. Although it was the center of the city for a long time when it was originally planned, it lost its feature of being city center. But, the settlement, street dwelling have not lost its significance because it is a special place that explains the culture of the city. Today, Odunpazarı which was declared as a protected area, is hosting thousands of tourists every year. Since it is forbidden to build new buildings in the region, it is used only by certain rules and restoration of the old houses. Some houses in the region have also been restored to be used for accommodation and trade purposes. In this study, an analysis of a street selected from Odunpazarı district has been carried out. Şakirler Street is a street texture located on the west side of the region and containing thirteen houses. Although there is no direct connection to the main avenue, tourists often pass through this street as well. The houses have not undergone any functional transformation and used as housing. In terms of sustainability of the cultural heritage, the necessity of the examining and analying housing plans, all features of the streets in this area and facade typologies determined the scope of the study. As a result of the study, the housing morphology in the street was explained in graphics, and the relation of the houses to each other was examined. Key words: cultural heritage, Odunpazarı houses, Şakirler Street.
263
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
A New Multi Criteria Decision Making Approach for Green Flexible Manufacturing Systems Considering Risk Factors Elif Özgörmüş1,*, Yusuf Yılmaz1 1
Pamukkale University, Department of Industrial Engineering, Denizli, Turkey *Responsible author e-mail:
[email protected]
Abstract
In today’s environmental conscious world, minimization of energy consumption and waste is as important as cost reduction and efficiency. Developing a green manufacturing system is not a volunteer action anymore, it is a strong obligation for future international companies. Flexible Manufacturing Systems provides many important benefits such as reduced inventory, reduced floor space, and lower lead times however they consume a huge amount of energy as it is composed of a large number of CNC’s with automatic material handling systems and robots. Therefore, this paper presents a decision making approach for implementing a green design in flexible manufacturing systems. A Fuzzy Axiomatic Design (FAD) and Fuzzy Axiomatic Design with Risk Factors (RFAD) approaches are both proposed to optimize the design of flexible manufacturing systems under green concept. The proposed methods are illustrated via the assessment of a cell design in automobile industry. A very well-known firm in Turkey needs to renew the manufacturing cell of the facility and the decision problem considered in this study is to select the most appropriate CNC’s machines and the robot for the FMC. The functional requirements are defined by the experts and alternatives are evaluated by using two different methods: FAD and RFAD. According to the obtained results of calculations, the suggestions of FAD and RFAD methods are not identical since RFAD considers the risk factors. Key words: Multi criteria decision making, risk factors, axiomatic design, green manufacturing systems.
264
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
A Multi Criteria Decision Making Approach For Green Supplier Selection Problem in English Elif ÖZGÖRMÜŞ1,*, Zehra DURAK1 1
Pamukkale University, Industrial Engineering Department, Denizli, Turkey *Responsible author e-mail:
[email protected]
Abstract Today’s environmental conscious world forces companies to be more sensitive about energy and water consumption. As a critical decision of companies, supplier selection problem needs to consider not only economic factors, but also the environmental factors. Traditional supplier selection criteria such as cost, quality and service are widely used in the literature but green criteria such as energy consumption, hazardous material usage and awareness of environmental responsibility are newly chosen as a decision criteria by many researchers. This paper presents a novel approach for green supplier selection problem: fuzzy axiomatic design with risk factors (RFAD). The approach presented in this paper integrates the risk factors in each criterion, calculates the information content to compare alternatives, and determines the most appropriate alternative. Furthermore, this new approach also presents a new and systematic opportunity to green supplier selection problem so that they can reach a realistic decision. The proposed model is illustrated with a case study from Turkey to select the most appropriate supplier due to the new legal environmental requirements. The results are compared with conventional fuzzy axiomatic design (FAD) and fuzzy TOPSIS methods. Different than conventional FAD, the supplier 2 is the most appropriate supplier out of three suppliers according to the RFAD.abstract should include the aim, content and conclusions of your work. The abstract should be at least 200 words. Key words: Multi criteria decision making, Fuzzy axiomatic design, axiomatic design with risk assesment.
265
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Kente Dair Sürdürülebilir Tasarım Modeli: Ekokentler Elvan KUMTEPE1,* Süleyman Demirel Üniversitesi Mimarlık Fakültesi Mimarlık Bölümü, Isparta, Türkiye * Sorumlu yazar e-posta:
[email protected]
1
Özet İnsanoğlu ilk yerleşimlerini doğayla uyumlu şekilde oluşturmuş, binlerce yıl boyunca bu uyumu koruyarak doğaya zararsız biçimde yaşamını sürdürmüştür. Modern çağda sanayinin gelişmesi ile değişen üretim ve yaşam biçimleri nedeniyle kırdan kentlere hızla göçler gerçekleştirilmiştir ve yüksek yoğunluklu yapılaşma nedeniyle sağlıksız, altyapısı olmayan ve her geçen gün daha kötüye giden yaşam alanları oluşmaya başlamıştır. Bilinçsiz tüketim sonrasında Hava ve su kirliliği, atıkların çoğalması ve gürültü gibi kendini gösteren çevre sorunları sonucunda doğa-insan ilişki dengesi bozulmuştur. Kent merkezleri bu yoğunluğu kaldıramayarak pek çok problemin odağı haline gelmiş, kentler spekülatif biçimde ve plansızca büyümeye, yeşil alanlar ve doğal kaynaklar tahrip edilmiştir. 1987 yılında BM tarafından yayınlanan Brundtland Raporu ilk kez “sürdürülebilir kalkınma” kavramını ortaya koymuştur. Bu olumsuzluklar doğrultusunda mevcut koşulların değiştirilmesine için arayışa girilerek kent için çözümler üretilmiştir. Kentlerde yaşayan nüfus yoğunluğunun hızla artması ve kentsel dinamiklerin doğal çevre üzerindeki tahrip edici hale gelmesi ile alıştığımız kentler doğa ve insan ilişkisini ön plana çıkaran, çevre dostu kent formlarına geçmeye başlamıştır. Doğa’nın korunması hakkındaki farkındalığın planlara yansıtıldığı, kaynakların akılcı kullanımını ve insanların sağlıklı, huzurlu ve güvenli bir yaşam ortamında hayatlarını sürdürmelerini esas alan, yeni kent çözüm önerileri getiren, doğaya saygılı ve kendi enerjisini üreten Ekokentlere ihtiyaç duyulmuştur. Bu ihtiyaçlar doğrultusunda canlı organizmalar ve doğal ekosistemlerin fonksiyonlarını sürdürebileceği, kendi kendine devam edebilen, sağlıklı bir yerleşimi oluşturmak hedeflenmiştir. Ekokent tasarımlarında insanların kent hayatını çevresel, ekonomik, politik ve sosyokültürel faktörler ile ilişkili olan ekolojik parametreler doğrultusunda oluşturulan en iyi koşullarda geçirmesi ana hedef olarak düşünülmektedir. Doğal kaynakların akılcı kullanımı, atık yönetimi ve enerji verimliliği gibi eko kent kavramının parametrelerinin devamlılığı ile gelecek nesillere aktarılarak sürdürülebilirliği amaçlanmaktadır. Bu amaçlar doğrultusunda çalışmada Türkiye’de ve dünyada tasarlanan Ekokent örnekleri sürdürülebilirlik parametrelerinden sosyokültürel, ekonomik ve ekolojik parametreler doğrultusunda analiz edilmiş ve değerlendirilmiştir. Sonuç olarak, yoğun kentleşmenin görüldüğü günümüzde gelecek için daha etkin bir rol oynayacağı öngörüldüğü için sürdürülebilir tasarım modellerinden olan Ekokent yerleşimlerine dikkat çekmek adına önemlidir. Anahtar kelimeler: Ekokent, Sürdürülebilirlik, Kent Modelleri, Ekoloji, Sürdürülebilir Kentler.
266
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sustainable Design Model For City: Ecocities Elvan KUMTEPE1,* Süleyman Demirel University, Department of Architecture, Isparta, Turkey * Responsible author e-mail:
[email protected]
1
Abstract Human beings made their first settlements in harmony with nature and by protecting this harmony for thousands of years maintained a harmless lifestyle for the nature. Due to changes in means of production and lifestyles result from industrial revolution in the modern era, immigration has rapidly multiplied from the city to the cities, and due to the high density of the settlement, unreliable, non-structural and everworse living areas have been formed. Following overconsumption, environmental problems such as air and water pollution, proliferation of waste and noise resulted in deterioration of the nature-human relationship balance. Urban centers have become the core of many problems as they are not capable of removing this density; cities have been subject to speculative and unplanned growth, green areas and natural resources have been devastated. The Brundtland Report published by the UN in 1987 introduced the concept of "sustainable development". Against these problems, solutions have been produced for the city by seeking to change the existing conditions. Cities known for rapid increase in population and its destructiveness for the natural environment have started to be transformed into environmentally friendly urban forms that bring nature and human relations to the forefront. Thus, we need eco-friendly and self energy generating Ecocities where the consciousness of protection of the environment is shown in practise and which are based on reasonable use of natural sources, providing healthy, peaceful and safe environment conditions for human beings and proposing new city solutions. In line with these needs, it is aimed to create a proper self-sustaining settlement where living organisms and natural ecosystems can lead their functions. In Ecocity designs, it is considered that the main goal of the people is to lead the urban life in the best conditions in terms of ecological parameters related to environmental, economic, political and sociocultural factors. With the continuity of the parameters of the concept of ecocity such as the rational use of natural resources, waste management and energy efficiency, sustainability has been the main goal to transfer to future generations. Examples of Ecocity, which are designed in Turkey and in the world, are analyzed and evaluated in terms of sustainability parameters, which are socio-cultural, economic and ecological parameters. As a result, it is important to draw attention to Ecocity settlements which are one of the sustainable design models, since it is predicted from today when an intensive urbanization will play role more actively in the future. Key words: Ecocities, Sustainabilitiy, Urban Models, Ecology, Sustainable Cities.
267
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Kültürel, Ekonomik ve Sosyal Sürdürülebilirlik Bağlamında Ekoköyler Elvan KUMTEPE1,* Süleyman Demirel Üniversitesi Mimarlık Fakültesi Mimarlık Bölümü, Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected]
1
Özet Günümüzde artan çevre sorunları, nüfus ve kontrolsüz kentleşme nedeniyle insanlar üzerinde kent hayatının oluşturduğu büyük bir memnuniyetsizlik görülmektedir. Artan kentli olma olgusundan uzaklaşma isteği ile farklı bakış açıları ve yeni yaşam tarzı arayışları ile çözümler geliştirilmektedir. Oluşan sorun ve arayışlar doğrultusunda ‘’Ekoköy’’ kavramı da en önemli ve güncel alternatif çözümlerden biri olarak 1960’lı yıllarda ortaya çıkan çevreci yaklaşımlardan biridir. Ekoköy oluşumları, modernleşme ile birlikte artan yoğun yapılaşma ve betonlaşma, doğadan uzaklaşma gibi temel sorunlar nedeniyle insanların modern hayatta mahrum kaldığı alternatif ekolojik yerleşim ve yaşam tarzını sunmaktadır. Ekoköy kavramı, kırsal alanlarda ortak yaşam süren toplulukların yaşayacağı, ekonomik olarak kendi döngü sistemine sahip, yerele ve kültüre önem vererek çevreyi koruyup geliştiren, doğal kaynaklara zarar vermeyen, iklimle uyumlu, yenilenebilir enerji kaynaklarını kullanarak daha az enerji harcayan, atık yönetimine sahip küçük ölçekli yerleşim birimlerini yaratmayı kapsamaktadır. Çalışmada, Ekoköy kavramı üzerinden detaylı bir literatür taraması gerçekleştirilerek Türkiye ve dünyadan farklı yapıda Ekoköy örnekleri, amaç ve hedefleri doğrultusunda irdelenmesi çalışmanın kapsamını oluşturmaktadır. Sosyal, kültürel ve ekonomik açıdan sürdürülebilirlikleri sorgulanmıştır. Örnekler doğrultusunda Ekoköylerin başlangıçtaki hedeflerine ulaşıp ulaşmadığının değerlendirilmesi amaçlanmıştır. Bu amaç doğrultusunda tasarlanan ya da yeniden değerlendirilen Ekoköy yerleşimlerin gelecek için rol model olma durumları incelenmiştir. Sonuç olarak, farklı ölçeklerde incelenen örnekler doğrultusunda yok olma eğiliminde olan sosyal, kültürel ve ekolojik değerlerimizin sürdürülebilirliği adına Ekoköy oluşum modelleri için öneri ve parametreler tespit edilerek yeni oluşturulacak ya da mevcut yerleşim yerlerinin dönüşümünde günümüz ve gelecek adına rehber bir çalışma olması hedeflenmektedir. Anahtar kelimeler: Ekoköy, Sürdürülebilirlik, Ekoloji, Kırsal Yerleşimler.
268
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Ecovillages In The Context Of Cultural, Economic And Social Sustainability Elvan KUMTEPE1,* Süleyman Demirel University, Department of Architecture, Isparta, Turkey * Responsible author e-mail:
[email protected]
1
Abstract Today, there is a great dissatisfaction creates that urban life has on people due to increasing environmental problems, population and uncontrolled urbanization. With the desire to move away from the growing urbanization, solutions are being developed with different perspectives and looking for new lifestyles. In the direction of the problems and searching that have arised, the concept of ‘’Ecovillage’’ is one of the most important and up-to-date alternative solutions to the environmentalist approaches that emerged in the 1960s. The formations of ‘’Ecovillage’’ offer alternative ecological settlements and lifestyles that people have been deprived of in modern life due to fundamental problems such as dense building and increasing congestion, declining nature, along with modernization. The concept of Ecovillage involves to create units that a small-scale settlement which has waste management, living in communal communities living in rural areas, economically having its own loop system, preserving and developing the environment by giving importance to local and cultural, non destructive to natural resources, climate-friendly, using less energy by using renewable energy sources. In the study, examination of Ecovillage examples of different buildings from Turkey and the world constitutes the scope of the study by conducting a detailed literature search on the concept of Ecovillage in line with its goals and objectives. It was investigated in terms of their social, cultural and economic sustainability. It was aimed to evaluate whether Ecovillages have reached its initial objectives in the scope of the samples. In line with this objective, designed or re-evaluated ecovillage-settlements have been examined to being role model situations for the future. In conclusion, it is aimed to be a guide work In the name of the present and future in the transformation of the to be newly created settlements or existing settlements by determining the suggestions and parameters for Ecovillage formation models or in the name of sustainability of our social, cultural and ecological values which tend to disappear in the direction of examined samples at different scales. Key words: Ecovillage, Sustainabilitiy, Ecology, Rural Settlements.
269
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Çöven Bitkisinden Elde Edilen Saponinin Deri Endüstrisi Arıtma Çamuru Üzerine Etkisinin Değerlendirilmesi Emine ÇELİK1, *, Mehmet AYDOĞAN1, Ayla UYSAL1, Hasan ÖZÇELİK2 1
Süleyman Demirel Üniversitesi, Çevre Mühendisliği Bölümü, Isparta, Türkiye 2 Süleyman Demirel Üniversitesi, Biyoloji Bölümü, Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected]
Özet Biyosurfaktanlar; bakteriler, mayalar, mantarlar ve bitkiler tarafından üretilen, yapılarında lipofilik ve hidrofilik kısımlar içeren biyomoleküllerdir. Biyosurfaktanlar, sıvıların yüzey ve ara yüzey gerilimini azaltan özelliklere sahiptir. Hidrofobik kirleticilerin çözünebilirliliğini ve biyolojik olarak parçalanmasını artırmaktadırlar. Biyosurfaktanlar, yenilenebilir kaynaklardan elde edilmeleri, düşük toksititeye sahip olmaları ya da toksik olmamaları, biyolojik olarak parçalanabilir olmaları gibi özelliklerinden ötürü kimyasal surfaktanlara göre daha avantajlı kullanım alanlarına sahiptir. Ek olarak, biyosurfaktanlar aşırı sıcaklık ve pH koşullarında etkinliklerini koruyabilmektedirler. Biyosurfaktanlar; çevre teknolojileri, sağlık, kozmetik, tarım ve petrol endüstrisi gibi endüstriyel alanlarda kullanılmaktadır. Bu çalışmada deri endüstrisi arıtma çamurundan biyosurfaktan uygulaması ile hidroliz yöntemi krom giderimi için araştırılmıştır. Bir bitki kaynaklı biyosurfaktan olan Çöven bitkisi saponini, krom salınımı için yoğunlaştırılmış deri endüstrisi arıtma çamuruna uygulanmıştır. Deri endüstrisi arıtma çamurları krom kadar önemli oranda diğer metalleri ve azotu da ihtiva etmektedir. Bu sebeple, saponinin etkisi sadece krom salınımı üzerine değil, aynı zamanda diğer metaller ve nütrientler için de değerlendirilmiştir. Salınımlar üzerine hem saponin çözelti konsantrasyonu hem de saponin/çamur oranı etkileri araştırılmıştır. Bu çalışmada, maksimum Cr salınımı saponin konsantrasyonu %20 ve saponin/çamur oranı (mL/g) 5/1 olduğunda elde edilmiştir. Saponin çözeltisinin konsantrasyonunun arttırılmasıyla, Cr salınımı artmıştır. Anahtar kelimeler: Bitki kaynaklı biyosurfaktan, Deri endüstrisi çamuru, Cr salınımı, Hidroliz, Saponin.
270
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Evaluation of the Effect of Saponin Obtained from Soapwort Plant on the Tannery Sludge Emine ÇELİK1,*, Mehmet AYDOĞAN1, Ayla UYSAL1, Hasan ÖZÇELİK2 1
Süleyman Demirel University, Department of Environmental Engineering, Isparta, Turkey 2 Süleyman Demirel University, Department of Biology, Isparta, Turkey *Responsible author e-mail:
[email protected]
Abstract Biosurfactants are biomolecules that contain lipophilic and hydrophilic moieties in their structure produced by bacteria, yeasts, fungi and plants. Biosurfactants have the unique property of reducing the surface and interfacial tension of liquids. They enhance the solubility of hydrophobic pollutants, thus increasing their potential for biodegradation. Biosurfactants offer advantages rather than synthetic surfactants due to their derivation from renewable resources, low or non-toxicity, biodegradability. Moreover, biosurfactants are able to maintain their effectiveness under extreme temperature and pH conditions. Biosurfactants are used in industrial fields such as environmental technology, healthcare, cosmetics, agriculture and petroleum industry. In this study, hydrolysis method with saponin application from the tannery sludge was investigated to chromium removal. Saponin obtained from Soapwort plant, a plant derived biosurfactant, was applied to thickened tannery sludge for chromium release. The tannery sludge contains other metals and nitrogen as considerable amount as chromium. For this reason, the saponin effect was evaluated not only for chromium release, but also for other metals and nutrients. The effects of both the saponin solution concentration and the saponin/sludge ratio on the releases were investigated. In this study, maximum Cr release was obtained at saponin concentration 20% and saponin/sludge ratio (mL/g) 5/1. Increasing the concentration of saponin solution, release of Cr increased. Key words: Cr release, Hydrolysis, Plant derived biosurfactant, Saponin, Tannery sludge.
271
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Yeşil Ekonomi Kavramının Çevrenin Korunması Açısından Değerlendirilmesi Emine Su TURAN1,*, F. Elçin ERKURT2, Behzat BALCI3 1,2,3
Çukurova Üniversitesi, Mühendislik- Mimarlık Fakültesi, Çevre Mühendisliği Bölümü Sarıçam, Adana *Sorumlu yazar e-posta:
[email protected]
Özet Dünya ekonomisi, son yıllarda sık sık görülmeye başlayan krizlerle sarsılmaktadır (2001 ve 2008 Krizleri). Gün geçtikçe finansal krizin petrol, gıda ve su kriziyle birleşmesi sorunu daha da derinleştirecektir. Dünya Bankası tarafından yaklaşık 1 milyar insanın açlık ve sefalete düşeceği beyan edilmektedir. Dünya nüfusunun hızla artması ve ekonomik büyümenin fosil yakıtlara bağlı olması çevrenin hızla kirlenmesine sebep olmuştur. Çevre kirliliğindeki bu artış 1980’lerden sonra toplumların küresel çevreyi korumaya, ekonomide çevreci teknolojilere, politikalara ve yatırımlara yönelmek durumunda kalmalarını sağlamıştır. İklim değişikliği gibi çevresel ve ekonomik etkileri olan problemler ve yaşanan ekonomik krizler, sürdürülebilir kalkınma çerçevesi altında yeşil büyüme, yeşil ekonomi, düşük karbonlu ekonomi, sürdürülebilir üretim ve tüketim kavramlarını ortaya çıkarmıştır. Sürdürülebilirlik çabalarının çevreci olabilmesi için ülke ekonomilerinin, yeşil ekonomi şekline dönüştürülmesi gerekir. Esasen ekonomi kavramı, zaten kıt kaynakların en etkin şekilde kullanımını içine alan bir kavramdır. Yeşil ekonomi ile de mevcut kaynakların etkin kullanımının yanı sıra kullanım sonrası ortaya çıkan tüm atıkların da etkin kullanımı yani pozitif etkiler anlatılmak istenmektedir. Ayrıca üretim sürecinin sonunda yaratılan negatif etkilerin de telafi edilmesi gerektiği yeşil ekonomi görüşünün içerisinde yer almaktadır. Yeşil ekonomi; insanın doğa üzerindeki yıkıcı müdahalelerinin en aza inmesini, bu sayede dünyadaki canlı yaşamın ve insan uygarlıklarının kalıcı olmasını, devasa ölçeklere karşı toprağa yakın, doğayla uyumlu ve insani ölçekte üretim-tüketim ilişkilerini temel alan ekonomik anlayıştır. Yeşil Ekonomi, doğal sermayeyi zenginleştiren, ekolojik sorunları ve çevre risklerini azaltan sektörlere yatırımlar yapılmasını hedeflemektedir. Bu sektörler arasında yenilenebilir enerji, düşük karbon salınımı sağlayan ulaşım sistemleri, enerji tasarrufu sağlayan binalar, temiz enerji, atık yönetimi, temiz su kaynaklarının artırılması, sürdürülebilir tarım, ormanların yönetimi ve sürdürülebilir balıkçılık yer almaktadır. Yeşil ekonomi çevresel anlayışları karşılamada sürdürülebilirlik ilkesiyle hareket ederek bireylerin, toplumların, ekosistemlerin bir bütün olarak denge içerisinde devamlılığının sağlanmasına ortam hazırlamaktadır. Yeşil ekonomideki sürdürülebilir kalkınma stratejisinin çevre ve kalkınma politikalarıyla uyumlu olabilmesi için; büyümeyi canlandırmak, büyümenin kalitesini değiştirmek, temel ihtiyaçları karşılamak, sürdürülebilir nüfus düzeyini garanti altına almak, kalkınmanın daha katılımcı olmasını sağlamak gerekir. Sektörel olarak değerlendirildiğinde doğayla uyum içinde yalnızca enerji ve gıda üretimi ile doğayı korumakla kalmayıp, bozulan doğal alanları onaran ve endüstriyel sistemi doğaya uyumlu bir şekilde dönüştüren işler de yeşil ekonominin önemli birer parçasıdır. Atıkların zararsız hale getirilmesi, arıtma tesisleri inşası, yeni teknolojilerin geliştirilmesi, pasif ev, güneş evi, ekolojik mimari gibi doğa dostu uygulamalar, bozulan doğal alanların, ormanların ve sulak alanların restorasyonunu sağlayan çalışmalar, ağaçlandırma işleri, ısı yalıtımı ve su tasarrufu sağlayan sistem ve teknolojiler, enerji tasarrufunu kolaylaştıran, yenilenebilir enerjiyle kesintisiz elektrik 272
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
akışı sağlayan yapay zeka teknolojileri ve akıllı şebekeler, uzak mesafe seyahatlerini ve tüketimi azaltan bilişim uygulamaları, kentlerde bisikletlilere ve yayalara göre ulaşım sistemlerinin kurulması, toplu taşıma ile ulaşımın geliştirilmesi, eko turizm ve ekolojik ayak izini azaltacak her türlü araştırma geliştirme faaliyeti yeşil ekonominin kapsamı içinde yer alır. Kaynakların korunmasının ve adil olarak paylaştırılmasının sağlanması ekonominin temel işlevleri arasında yer almalıdır. Bu noktada yeşil ekonomi, insan, ekosistem ve yeryüzü boyutlarını bir bütün halinde ele almayı amaçlamıştır. Gerçek dünyanın ayrılmaz bir parçası olan ekosistemleri ve diğer türleri gözeten, başka bir ifade ile gezegenimize ve çevresel tehditlere duyarlı ekonomik, sosyal ve kültürel bir sistem kurulmasına ihtiyaç olduğu ve Neo-klasik ekonomi modelinin, insanoğlunun beşte biri için önlemler alma konusundaki başarısızlığın, yönetim sisteminin başarısızlığını ortaya koyar nitelikte olduğu düşünüldüğünde ekonomik kalkınmanın, çevreye duyarlı yaklaşımla dengeli bir şekilde yürütülmesi için yeşil ekonominin oldukça önemli olduğu ve yeşil ekonomiye yatırım yapılması gerektiği anlaşılmaktadır. Anahtar kelimeler: Yeşil Ekonomi, Sürdürülebilir Çevre, Çevre, Sürdürülebilir Kalkınma.
273
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Assessing the Green Economy Concept in the Context of Environmental Protection Emine Su TURAN1,*, F. Elçin ERKURT2, Behzat BALCI3 1
Cukurova University, The Faculty of Engineering and Architecture, Department of Environmental Engineering, Adana/ Turkey * Responsible author: e-mail:
[email protected]
Abstract International interventions that were started in sustainable development targets for the purpose of reducing environmental damages have not been adequate in eliminating the global environmental problems and the threats on natural resources. The inadequate precautions taken for the purpose of controlling the negative effects of economy and human activities on natural resources and the environment cause that the effects of important global problems -mainly the climatic change- become even bigger. Economic systems that are focused on production and growth but that require less effort and produce more pollution have prevented the environmental protection concept. The green economy approach ensures that environmental disruptions are prevented and natural resources are used in a sustainable manner. It also provides new economic development areas and job opportunities to continue development. When it is considered that there is a need to establish a system that is sensitive to the environmental threats, in other words, that cares for ecosystems which are a part of the life on earth in today’s environmental conditions, it is understood how green economy approach is important to run the economic activities in an approach that is sensitive to the environment. Key words: Green Economy, Sustainable Environment, Environment, Sustainable Development.
274
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Yeşil Yıldız Uygulamasının Sürdürülebilir Turizm ve Çevresel Açıdan Önemi Emine Su TURAN1,*, Behzat BALCI2 F. Elçin ERKURT3 1,2,3
Çukurova Üniversitesi, Mühendislik- Mimarlık Fakültesi, Çevre Mühendisliği Bölümü Sarıçam, Adana * Sorumlu yazar e-posta:
[email protected]
Özet Turizm faaliyetlerinin sürdürülebilmesi büyük oranda çevresel unsurlara bağlı olarak mümkün olmakla birlikte aynı zamanda bu faaliyetlerin faaliyetin gerçekleştiği çevrede olumsuz etkilere de neden olduğu açıktır. Turistik konaklama işletmeleri elbette çevre sorunlarının tek sorumlusu değildirler ancak hukuki ve etik sorumluluğun bir gereği olarak, faaliyetin planlaması aşamasından itibaren çevreyi korumaya yönelik stratejiler ile hareket etmeleri, hem sürdürülebilir turizm hem de çevresel açıdan büyük önem arz etmektedir. Çevresel faktörlerin önem arz ettiği sektörlerin başında gelen turizm sektörünün girdisini oluşturan doğal, tarihi ve kültürel kaynakların korunması, tahribatlarının önlenmesi, sektörün varlığı, gelişimi ve sürekliliği için büyük önem taşımaktadır. Turizm sektörünün en önemli paydaşlarından biri olan konaklama işletmelerinin faaliyetleri sebebiyle, çevreye verdikleri zararın minimuma indirilmesi amacıyla dünya genelinde ve ülkemizde çeşitli sertifikasyon sistemleri uygulanmaktadır. Bu sertifikasyon sistemleri hem çevresel sorunların çözülmesi hem de üretim kalitesinin arttırılmasında büyük önem taşımaktadır. Konaklama işletmeleri pazar paylarını artırmak, piyasadaki varlıklarını sürdürmek, rekabet avantajı elde etmek ve müşteri sadakati oluşturmak gibi nedenlerden dolayı; değişen çevre koşullarına bağlı olarak çeşitli stratejiler uygulama gereksinimi duyarlar. Bu stratejilerden biri de Yeşil Yıldız Uygulamasıdır. Türkiye’de turizme yönelik olarak uygulanmakta olan üç eko-etiket programından biri olan Yeşil Yıldız Simgesi (Çevreye Duyarlı Konaklama Tesisi Belgesi), sürdürülebilir turizm anlayışıyla, çevre kalitesinin korunması, çevre bilincinin geliştirilmesi, turizm faaliyetleri kapsamında çevreye duyarlı yapılaşmanın ve işletmecilik özelliklerinin teşvik edilmesi amacıyla, çevreye duyarlı konaklama tesislerinin sınıflandırılmasına ve belgelendirilmesine ilişkin usul ve esasları düzenlemek amacıyla uygulanmaya başlanmıştır. Bu uygulama; çevreye etkisi olacak faaliyetlerin minimuma indirilmesini, enerji ve su kullanımının kontrolünü, çevreye etkisi olan ürün kullanımının azaltılmasını, atık miktarının azaltılmasını, enerji verimliliğinin arttırılmasını, yenilenebilir enerji kaynaklarının kullanımının teşvik edilmesini, konaklama işletmelerinin yatırım aşamasından itibaren çevreye duyarlı olarak planlanmalarını ve gerçekleştirilmelerini, tesisin çevreye uyumunu, çevreyi güzelleştirici düzenleme ve etkinlikleri, ekolojik mimariyi, çevreye duyarlılık konusunda bilinçlendirmeyi, eğitim sağlanmasını ve ilgili kurum ve kuruluşlarla işbirliği yapılmasını kapsamaktadır. Yeşil yıldız çevreye duyarlılık projesi, mikro ölçekte atık azaltımı, geri dönüşüm, yeniden kullanım, enerji yönetimi, su kaynakları ve atık su yönetimi, kültürel mirasın etkin yönetimi gibi sorunların çözümünü sağlarken makro ölçekte de istihdama ve yerel ekonomilerin gelişmesine katkı sağlamaktadır. Yeşil yıldız uygulamasının sektördeki tüm oteller tarafından uygulanmasıyla birlikte nesilden nesile aktarılan doğal çevre dolayısıyla da turizm sektörünün arz yönünü oluşturan doğal ortam korunmuş olacak böylelikle turizm faaliyetlerinin sürdürülebilirliği sağlanmış olacaktır. 275
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Çevrede ve doğada gerçekleşmiş kirlenmeyi, yıkımı salt teknoloji vasıtasıyla yenmek mümkün değildir. Çevrenin tahribinin aynı zamanda insanlığın kendini kendini yok etme süreci olduğu ve bu konudaki önlemlerin başında bireylerin, işletmelerin ve tesislerin çevreye ve doğaya yaklaşımlarının değiştirilmesinin geldiği açıktır. Bu bakış açısıyla yeşil yıldız uygulaması gibi çevreye duyarlı uygulama ve stratejilerin sürdürülebilirlik ve çevresel açıdan önemi büyüktür. Anahtar kelimeler: Yeşil Yıldız, Sürdürülebilir Turizm, Yeşil Turizm, Çevre.
276
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Importance of the Green Star Implementation in terms of Sustainable Tourism and Environment Emine Su TURAN1,*, Behzat BALCI2 F. Elçin ERKURT3 1
Cukurova University, The Faculty of Engineering and Architecture, Department of Environmental Engineering, Adana/ Turkey * Responsible Author: e-mail:
[email protected]
Abstract Protecting the natural, historical and cultural assets that constitute the input of the tourism sector, which is one of the sectors for which environmental factors are extremely important, and preventing the damages to them are important in terms of the existence, development and sustainability of the sector. For the purpose of reducing the damage caused by the activities of the accommodation businesses, which are one of the most important stakeholders of the tourism sector, various certification systems are applied both in the world and in our country. These certification systems are extremely important for the purpose of solving the environmental problems and increasing the quality of production. The Green Star Symbol has been used for the purpose of regulating the principles and methods in certification and classification of environmentally sensitive accommodation businesses and to encourage such businesses to protect the environment during performing their activities. This practice includes such activities like reducing the activities that may have influences on the environment, controlling the use of energy and water, reducing the usage of products that have influences on the environment, reducing the amount of the wastes, encouraging the use of renewable energy resources, providing environmentally-sensitive planning and realization of accommodation businesses as of the investment steps, and arousing awareness on the sensitivity for the environment. Key words: Green Star, Sustainable Tourism, Green Tourism, Environment.
277
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Aspir Bitkisinde (Carthamus tinctorius L.) Islah Çalışmaları Emrullah CULPAN1,*, Burhan ARSLAN1 Namık Kemal Üniversitesi, Tekirdağ, Türkiye *Sorumlu yazar e-posta:
[email protected]
1
Özet Ülkemiz yağlı tohumlu bitkilerin üretimi bakımından dışa bağımlı bir durumdadır. 2016 yılında ülkemiz 780.000 ton bitkisel ham yağ üretimi gerçekleştirirken, 1.482.000 ton ithalat gerçekleştirmiş ve üretimimiz ihtiyacımızın ancak %32’sini karşılayabilmiştir. Bu nedenle, ülke ekonomisi açısından da bir sorun haline gelen bitkisel yağ açığını kapatmak için son yıllarda alternatif yağ bitkileri üzerindeki çalışmalar hız kazanmıştır. Aspir de alternatif yağ bitkilerinden bir tanesidir. Aspir, ekolojik istekleri bakımından seçici olmaması ve diğer yağ bitkilerine nazaran geniş adaptasyon yeteneğine sahip olması, bitkiye farklı iklimlerde üretim imkanı sağlamaktadır. Öte yandan kurağa dayanıklılığı ve sulanmadan yetiştirilmesi özellikle nadas alanlarının değerlendirilmesine fırsat veren, ülkemiz bitkisel yağ açığını kapatma potansiyeline sahip yağ bitkilerinden birisi olabilecektir. Ancak yağ oranı ve tohum veriminin diğer yağ bitkilerine göre düşük kalması, aspir tarımının ülkemizde yaygınlaşmasını engellenmektedir. Dünyada aspir ıslahındaki en temel hedef yağ oranı ve tohum verimi yüksek çeşitlerin geliştirilmesidir. Bu çalışmalar aspir bitkisine daha geniş ekim alanı ve üretim sağlayacaktır. Bu nedenle, tohum verimi ve yağ oranını artırmaya yönelik çalışmalar yapılmalı ve yeni çeşitlerin geliştirilmesi için ıslah çalışmaları yapılmalıdır. Yerli tohumluk olarak ülkemizde sertifikalandırılmış Yenice, Dinçer, Remzibey, Balcı, Linas, Olas ve Göktürk çeşitleri ile üretim izinli Asol çeşidi vardır. Yeni geliştirilmiş aspir çeşitleri olan Balcı, Linas ve Olas çeşitlerinin yağ oranları artırılmış olsa da aspirin bölgemizde ekonomik olarak diğer yağ bitkileri (ayçiçeği, kanola) ile rekabet edebilmesi için en az onlar kadar tohum verimi ve yağ oranı olan yeni aspir çeşitleri geliştirilmelidir. Yeni aspir çeşitleri geliştirmek içinde ıslah amaçlarının çok iyi bilinmesi gerekmektedir. Bu amaçla bu araştırmada aspirde ıslah amaçları ve son ıslah çalışmaları üzerinde durulmuştur. Anahtar kelimeler: Aspir, Carthamus tinctorius, tohum verimi, yağ oranı, ıslah amaçları.
278
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Breeding Studies on Safflower (Carthamus tinctorius L.) Emrullah CULPAN1,*, Burhan ARSLAN1 Namık Kemal University, Tekirdağ, Turkey *Responsible author e-mail:
[email protected] 1
Abstract Turkey is dependent on other countries for production of oilseed crops. In 2016, crude oil was produced 780 000 tonnes, it was imported 1 482 000 tonnes in Turkey and this production met nearly 32 % of the our needs. Thus, research on alternative oil crops has continued recently in order to resolve vegetable oil deficit. Safflower is one of the alternative oil crops. As safflower is unselective in terms of ecological conditions and more resistant to lower temperatures than other oil crops, this provides a production area in different climates for the safflower. On the other hand drought resistant and cultivation without irrigation enable especially availability of fallow areas. Safflower will become one of the oil crops which have the potential to resolve vegetable oil deficit in our country. However, the oil content and seed yield of safflower are lower than other oil crops (sunflower, canola etc.), so safflower agriculture has not been able to develop in our country. The main aim of safflower breeding is development of high oil content and seed yield cultivars in the world. These studies will provide wider cultivation area and production of safflower. Therefore, research must be done in order to increase seed yield and oil content and breeding studies must be conducted in order to develop new cultivars. There are seven registered cultivars which are Yenice, Dinçer, Remzibey, Balcı, Linas, Olas, Göktürk and there are one cultivar which have production licences such as Asol. Although oil content of Balcı, Linas and Olas cultivars has been increased, new safflower cultivars whose oil content and seed yield are as high as theirs must be developed so that safflower in our region can contest economically other oil crops (sunflower, canola etc.). In order to develop new cultivars of safflower, the aims of breeding should be well known. For this purpose, this research focuses on safflower breeding aims and recent breeding studies. Key words: Safflower, Carthamus tinctorius, seed yield, oil content, breeding aims.
279
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Türkiye’nin Yağlı Tohum Üretimi ve Bitkisel Yağ Açığı Burhan ARSLAN1 , Emrullah CULPAN1,* Namık Kemal Üniversitesi, Tekirdağ, Türkiye *Sorumlu yazar e-posta:
[email protected]
1
Özet Yağ bitkileri üretimine ilişkin tutarlı tarımsal planlamaların yapılıp, uygulamaya sokulamayışı nedeniyle ülkemiz yıllardır yağlı tohumlar ve bitkisel yağlar ticaretinde net ithalatçı ülkeler arasındadır. Ülkemiz birçok tarımsal üründeki yeterli üretimine karşın özellikle yağlı tohumlar ve bitkisel yağ üretiminde büyük dış ticaret açığı vermektedir. TUİK’in dış ticaret verilerine göre, Türkiye 2016 yılında 3.1 milyon ton yağlı tohum (1.4 milyar $), 1.5 milyon ton ham yağ (1.6 milyar $) ve 1.6 milyon ton küspe (444 milyon $) olmak üzere 3.4 milyar $ değerinde toplam 6.2 milyon ton bitkisel yağ, yağlı tohum ve küspe ithal etmiştir. Bu ithalat rakamları 2016 yılı ülkemiz toplam dış ticaretinin (198.6 milyar $) yaklaşık % 1.7’sini oluşturmakta bu da ülke ekonomimiz açısından ciddi bir döviz kaybı anlamına gelmektedir. Türkiye’de üretilen yağlı tohumlardan elde edilen bitkisel yağ miktarı 2016 yılında 780 bin ton olup bu değer ülke ihtiyacımızın yalnızca 1/3’ünü karşılayabilmiştir. Ülkemiz hemen hemen her bölgesinde yağlı tohumlu bitkilerin üretimine elverişli olmasına rağmen, giderek artan bitkisel yağ açığı düşündürücü bir olaydır. Oysa Türkiye yağ bitkileri üretimi bakımından uygun ekolojik konumdadır. Ülkemiz bu avantajını en iyi şekilde değerlendirerek, bir takım önlemlerle planlı ve programlı bir çalışma yapılarak yağlı tohum ve bitkisel yağ üretiminde kendine yetebilecek ve üretim fazlasını ihraç edebilecek düzeye gelebilecektir. Anahtar kelimeler: Yağlı tohum, bitkisel yağ, yağ açığı, ithalat.
280
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Oil Crops Production and Vegetable Oil Deficit of Turkey Burhan ARSLAN1 , Emrullah CULPAN1,* Namık Kemal Üniversity, Tekirdağ, Turkey *Responsible author e-mail:
[email protected] 1
Abstract Turkey has been among importer countries in the trade of oilseeds and vegetable oils for many years. Because our country does not have consistent agricultural plans for production of oil crops which can not be put into practice, over the years vegetable oil deficit has increased. Despite adequate production of many crops in our country, the big foreign trade deficit exists especially in the production of oil crops and vegetable oil. According to TUIK foreign trade data, Turkey imported 6.2 million tons of vegetable oil, oilseeds and oilseeds pulp worth 3.4 billion dollars, 3.1 billion tons of oil seeds ($ 1.4 billion), 1.5 million tons of crude oil ($ 1.6 billion) and 1.6 million tons of oilseeds pulp ($ 444 million) in 2016. These import values constitute about 1.7% of the total foreign trade of our country in 2016 ($ 198.6 billion), which means a serious foreign currency loss in terms of our economy. The amount of vegetable oil obtained from oil seeds produced in Turkey is 780 thousand tons and this value can meet only 1/3 of the needs of our country in 2016. Althoug our country is suitable for the production of oilseed crops in almost every region, the increasing vegetable oil deficit is thought-provoking. However, Turkey's oil crops are in appropriate ecological condition in terms of their production. Our country will be able to make use this advantage ideally and plan and program it with a number of precautions so that it will be able to exert itself in the production of oil seed and vegetable oil and export the production excess. Key words: Oil seed, vegetable oils, oil deficit, import.
281
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Allura red, Brilliant blue ve β-karoten Renk Maddelerinin Çoklu Doğrusal Regresyon İle Tayini Enes ÇIRACI1,*, Güzide Pekcan ERTOKUŞ2, A. Hakan AKTAŞ3 Süleyman Demirel Üniversitesi, Isparta, Türkiye Süleyman Demirel Üniversitesi, Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2,3
Özet Piyasada satılan bir şeker numunesindeki gıda boyalarını analiz etmeye yönelik yapılan bu çalışmasında, Ultra-Viyole Görünür Alan Spektroskopisi, kemometri yöntemi ile birlikte kullanılmıştır. Allura Red, Brilliant Blue, β-karoten standart maddelerinin UV spektrumları alınarak, çalışma yapılabilecek saflıkta olduğu belirlenmiş ve analiz çalışmaları gerçekleştirilmiştir. Yöntemimizde, allura red, brilliant blue ve β-karoten için yüzde (%) geri kazanım değerleri ortalama olarak gerek sentetik karışım için, gerekse ticari numune için bulunmuştur. Her bir yöntem içinde geri kazanımlar yüksek değerlerde bulunmuştur. Kullanılan yöntemlerin, tekrarlanabilir sonuçlar vermesi, yüksek duyarlılık ve doğruluğun yanı sıra hızlı oluşu ve dörtlü boya karışımlarının analizi için önerilecek yöntem olmalarını sağlamıştır. Geliştirilen yöntemler, tekrarlanabilir, duyarlı ve doğru sonuç veren yöntemlerden biri olup allura red, brilliant blue ve β-karoten içeren gıda numunelerinin analizinde önerilebilir. Anahtar kelimeler: Allura Red, Brilliant Blue, β-karoten, Kemometri.
282
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Multi-Linear Regression of Allura red, Brilliant blue and βCarotene Food Colorants Enes ÇIRACI1,*, Güzide Pekcan ERTOKUŞ2, A. Hakan AKTAŞ3 1
Suleyman Demirel University, Isparta, Turkey Suleyman Demirel University, Isparta, Turkey *Responsible author e-mail:
[email protected] 2,3
Abstract In this study, ultra-violet visible area spectroscopy was used with a chemometrics method, structured analysis of colorants in a sugar sample sold in market. UV spectra of Allura Red, Brilliant Blue, β-carotene standard substances were taken, it was determined that they could be purity and the analyses were carried out. In our method, the percentage (%) of recovery values for allura red, brilliant blue and b-carotene were found both for the synthetic mixture and for the commercial sample on the average. The recoveries were found at high values within each methods. The used methods were a highly recommended method for the analysis of quadruple colorants mixtures because of the reproducible results and quickly as well as high sensitivity and accuracy. The reformed methods are one of the reproducibility sensitivity and accuracy results and can be suggested in the analysis of food samples contained allura red, brilliant blue and β-carotene. Key words: Allura Red, Brilliant Blue, β-karoten, Chemometry.
283
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Ekolojik Sürdürülebilirlikte Yeşil Reklamlar: Göstergebilimsel Bir Analiz Erdem GEÇİT1,*, Burcu ÖKSÜZ2 ,Mustafa YALÇIN3 İzmir Katip Çelebi Üniversitesi, İzmir, Türkiye İzmir Katip Çelebi Üniversitesi, İzmir, Türkiye 3 İzmir Katip Çelebi Üniversitesi, İzmir, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2
Özet Markaların hayatta kalma mücadelesine dönüşen günümüzün rekabet savaşı, hedef kitlesiyle duygusal köprüler kurabilenlerin kazandığı, kuramayanlarının ise marka mezarlıklarına gömüldüğü bir pazar arenası gündeme getirmiştir. Rekabet üstünlüğü sağlamak için daha fazla tükettiren ve buna bağlı olarak daha fazla üretim gerçekleştiren markalar, sahip oldukları üretim sistemleri nedeniyle ekolojik dengeye zarar vermektedir. Bu duruma seyirci kalmak istemeyen bugünün çevreye, doğaya ve topluma duyarlı postmodern tüketicisi ise güçlü bir karşı duruş sergilemektedir. Söz konusu karşı duruşun sonucu, markalar da çevreye daha duyarlı hale gelmiş ve bunu hedef kitlelerine duyurmaktan da geri kalmamışlardır. Rekabet avantajını yalnızca rasyonel vaatlerle kazanamayacaklarının farkına varan markalar, tüketicilerle duygusal bağlar kurabilmek amacıyla çevresel sosyal sorumluluklarını yerine getirme çabasına girmişlerdir. Ekolojik sürdürülebilirliği yakalamak için “yeşil ürün” üretim inovasyonlarının yanı sıra “yeşil reklamcılık” gibi pazarlama yaklaşımları ile hedef kitlelerine seslenmektedirler. Buradan hareketle çalışma kapsamında otomobil, beyaz eşya, elektronik, kozmetik ve akaryakıt sektörlerinde faaliyet gösteren markaların yeşil ürün tanıtımlarında kullandıkları yeşil reklamların göstergebilimsel çözümlemeleri yapılacaktır. Göstergebilimsel çözümleme yöntemi ile elde edilen sembolik anlatımlara ilişkin bulgular karşılaştırılarak, markaların hedef kitleleriyle duygusal bağ kurma sürecinde kullandıkları görsel ve işitsel kodlar kategorize edilerek yorumlanması amaçlanmaktadır. Anahtar kelimeler: Yeşil ürün, yeşil reklam, göstergebilim, ekolojik yaşam, sürdürülebilirlik.
284
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Green Advertisements in Ecological Sustainability: A Semiological Analysis Erdem GEÇİT1,*, Burcu ÖKSÜZ2, Mustafa YALÇIN3 İzmir Katip Çelebi Üniversity, İzmir, Turkey İzmir Katip Çelebi Üniversity, İzmir, Turkey 31 İzmir Katip Çelebi Üniversity, İzmir, Turkey *Responsible author e-mail:
[email protected] 11 21
Abstract Today's competitive war, which has transformed into the survival struggle of brands, those who build emotional bridges with their target audiences, those could not build an emotional bridge, brought to to the agenda a market arena buried in brand graveyards. Brands, which are consume more to provide competitive advantage and thus produce more, are ruthlessly slaughtering the ecological balance due to their production systems. The postmodern consumer who does not want to watch this massacre and is sensitive to today's environment, nature and society exhibits a strong counter-stance. The result of the counter-stance, brands have become more responsive to the environment and have not lagged behind announcing it to their target audience. The brands that realize that they can not win the competitive advantage with rational promises, have sought to replace environmental social responsibilities in order to create emotional ties with consumers. In order to capture ecological sustainability, "green product" has been addressed to target groups by marketing approaches such as "green advertising" as well as production innovations. Thus in this scope of work, semiotic analyzes of the green advertisements used by the brands operating in the automobile, white goods, electronics, cosmetics and fuel sectors in the green product promotions will be made. It is aimed to interpret by categorizing the visual and auditory codes used in the emotional connection process with the target audiences of the brands by comparing the findings about the symbolic expressions obtained with the semiological analysis method. Key words: Green product, green advertisement, semiotics, ecological life, sustainability.
285
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Bozyazı’da Kırsal Turizmde Paydaşların Algısının Değerlendirilmesi Eren DURMUŞ-ÖZDEMİR1,*, Sevinç ŞENER2, Demir ÖZDEMİR3 Akdeniz Üniversitesi, İİBF, İşletme Bölümü, Antalya, Türkiye Akdeniz Üniversitesi, Teknik Bilimler MYO, Organik Tarım Programı Antalya, Türkiye 3 Akdeniz Üniversitesi, Teknik Bilimler MYO, Organik Tarım Programı, Antalya, Türkiye *Sorumlu yazar:
[email protected] 1
2
Özet Bu çalışmanın amacı Bozyazı’nın kırsal turizm potansiyeline ilişkin paydaşların algısını araştırmaktır. Mevcut çalışma ile paydaşların bakış açısından kırsal turizmin zorlukları belirlenmeye çalışılmıştır. Bozyazı yüksek muz üretimi, özgün iklimi, biyoçeşitliliği, kültürel ve tarihi birikimi ile kırsal turizm potansiyeline sahip olmasına rağmen, kırsal turizmin gelişmesinde pek çok engel barındırmaktadır. Araştırma soruları Bozyazı İlçe Kaymakamlığı, Bozyazı İlçe Gıda Tarım ve Hayvancılık Müdürlüğü, Bozyazı Belediye Başkanlığı, Mersin Organik Muz Üreticileri Birliği’nin üst düzey yöneticileri ile derinlemesine görüşmeler ve 148 çiftçi ile soru formları aracılığı ile sorgulanmıştır. Araştırma sonuçları bölgede yerel yönetim algısının aksine, çoğu çiftçinin Bozyazı’da kırsal turizm temelli faaliyetlerden habersiz olduğuna işaret etmektedir. Soru formlarına ilişkin bulgular çok sayıda çiftçinin kırsal turizm ile birlikte ilçenin sakinliğini ve doğal güzelliğini kaybedeceği hakkında endişelere sahip olduğunu göstermiştir. Ayrıca çiftçiler kırsal turizm faaliyetleri ile gelir düzeylerinde artış olacağına inanmamaktadırlar. Kırsal turizm faaliyetleri dünyanın pek çok ülkesinde bölgesel gelişimde yaygınlaşmasına rağmen, Bozyazı’da yerel çiftçilerin bilinç eksikliği nedeni ile kabul görmemektedir. Yine de Bozyazı çiftçileri tarafından kırsal turizm faaliyetlerinin içeriğinin anlaşılması ileride Bozyazı’da sürdürülebilir kırsal kalkınmaya katkı sağlayacaktır. Anahtar kelimeler: Kırsal turizm, paydaş algısı, kırsal kalkınma, alternatif turizm.
286
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The evaluation of stakeholders' perceptions for agrotourism in Bozyazı Eren DURMUŞ-ÖZDEMİR1,*, Sevinç ŞENER2, Demir ÖZDEMİR3 1
Akdeniz University, Faculty of Economics and Administrative Sciences, Antalya, Turkey 2 Akdeniz University, Vocational School of Technical Sciences, Antalya, Türkiye 3 Akdeniz University, Vocational School of Technical Sciences Antalya, Türkiye *Responsible author:
[email protected]
Abstract The purpose of this study is to explore the stakeholders’ perception on the agrotourism potential of Bozyazı in Turkey. With this study, we tried to identify challenges issues of agro tourism from the perspective of stakeholders. Although Bozyazı is a well-positioned place to offer agrotourism potential with its high-potent banana growing, specific microclimate and biodiversity, and reserving historical and cultural accumulation, it still has some barriers against to such activities for developing agrotourism. The research questions were pursued through questionnaires with the 148 farmers and in depth interviews with the top level management of the Bozyazı District Governorship, General Directorate of Agricultural Research and Policy of Bozyazı, Municipality of Bozyazı, and Association of Organic Banana Growers of Mersin. The results of the study indicated that in contrast to regional government agencies’ perceptions, most of the farmers in Bozyazı are unaware of agrotourism-based activities. The findings of the questionnaires with farmers also showed that most of the farmers have some concerns about to lose some characteristics of the town such as calmness and natural beauty. Moreover, they also don’t believe in these agrotourism activities to have a role on increasing their income levels. Although agrotourism facilities become widespread for the regional development in most countries in the world, it has been ignored by the farmers in Bozyazı because of the lacks of consciousness. Neverthless, advancing the understanding of the meaning of agro tourism by the farmers in Bozyazı, will contribute to rural sustainable development in Bozyazı in the future. Key words: Agro tourism, stakeholder perception, rural development, alternative tourism.
287
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Katı Atıklardan Enerji Üretiminin Türkiye’deki Örnekler Üzerinden İncelenmesi Ersin GÜLER1*, Gülşen AKIN GÜLER2 Eskişehir Osmangazi Üniversitesi, Eskişehir, Türkiye 2 Anadolu Üniversitesi, Eskişehir, Türkiye *Sorumlu yazar e-posta:
[email protected]
1
Özet Dünyada ve Türkiye’de artan nüfus ve sanayileşme nedeniyle enerji tüketimi artmakta ve bunun sonucunda bütün ülkeler enerji ihtiyacını karşılayabilmek için alternatif enerji kaynaklarına yönelmektedir. Günümüzde enerji ihtiyacının büyük kısmı kolay kullanım ve ulaşılabilirlik nedeniyle fosil yakıtlardan karşılanmaktadır. Ancak bu kullanım günümüzde çevre kirliliğinin de en önemli nedenlerinden olmuştur. Ayrıca fosil yakıtların sınırlı miktarda kaldığı ve yıllar sonra tükeneceği bilinmektedir. Türkiye ise yenilenebilir enerji kaynakları açısından zengin olmasına rağmen yeterince yararlanamamakta ve elektrik enerjisinin çoğunluğunu fosil yakıtlardan üretmektedir. Günümüzde kentlerdeki hızlı nüfus artışından dolayı sorunlardan biri de katı atıklardır. Katı atıkların toplanması, imhası ve geri dönüştürülmesi sorun olmaktadır. Geçmiş yıllarda uygulanan vahşi depolama çevre ve insan sağlığına büyük zararlar vermiş, can ve mal kayıplarına neden olmuştur. Bu sorunun çözümü için çalışmalar yapılmış ve katı atıklardan enerji üretim yöntemleri geliştirilmiştir. Katı atıkların oluşturduğu çevresel problemler ve enerji ihtiyacı göz önüne alındığında, atıklardan enerji üretilmesi iki sorunu da çözmektedir. Ayrıca enerji üretimi sayesinde hem ülke ekonomisine katkı sağlanmakta hem de enerjide diğer ülkelere olan bağımlılığı azaltmaktadır. Katı atık bertaraf etme yöntemleri; düzenli depolama, yakma, gazlaştırma ve anaerobik çürütmedir. Bu çalışmada, Türkiye’de yenilenebilir enerji kaynaklarından bahsedilerek katı atıklardan enerji üretilmesi detaylı olarak incelenmiştir. Katı atık bertaraf yöntemleri sırasıyla anlatılmıştır. Ayrıca ülkemizde çalışmakta olan katı atık enerji üretim tesisleri hakkında bilgiler verilerek karşılaştırma yapılmıştır. Anahtar kelimeler: Katı atık, enerji, dönüşüm.
288
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Investigation of Energy Production From Solid Waste Samples in Turkey Ersin GÜLER1*, Gülşen AKIN GÜLER2 1
Eskişehir Osmangazi University, Eskişehir, Turkey 2 Anadolu University, Eskişehir, Turkey *Responsible author e-mail:
[email protected]
Abstract Due to increasing population and industrialization in the world and in Turkey, energy consumption increases and as a result all countries are turning to alternative energy sources to meet their energy needs. Today, much of the energy needs are met by fossil fuels because of easy use and accessibility. However, this use is one of the most important causes of environmental pollution today. It is also known that fossil fuels remain limited and will be consumed years later. Although Turkey is rich in terms of renewable energy sources, Turkey does not make much use of it and produces the majority of its electricity from fossil fuels. Today, one of the problems due to the rapid population increase in the cities is the solid wastes. The collection, disposal and recycling of solid wastes is a problem. Wilderness applied in the past years caused enormous damage to environment and human health, causing loss of life and property. Work has been done to solve this problem and energy production methods have been developed from solid waste. Given the environmental problems and energy needs of solid waste, energy generation from waste also solves two problems. In addition, thanks to energy production, it contributes to the economy of the country and also reduces the dependency of other countries on energy. Solid waste disposal methods; Regular storage, incineration, gasification and anaerobic digestion. In this study, the production of energy from solid wastes by discussing renewable energy sources in Turkey has been examined in detail. Solid waste disposal methods are explained respectively. In addition, information has been provided about the solid waste energy production facilities currently working in our country. Key words: Solid waste, energy, recycling.
289
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Akıllı Cephe Sistemleri ve Malzemelerinde Yeni Yaklaşımlar Gülşen AKIN GÜLER1, Ersin GÜLER2* Anadolu Üniversitesi, Eskişehir, Türkiye Eskişehir Osmangazi Üniversitesi, Eskişehir, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2
Özet Sanayi devriminden sonra dünya giderek artan enerji ihtiyacı ile birlikte kaynakların tükenme tehlikesiyle karşı karşıya kalmıştır. Konuyla ilgili uluslararası toplantılar düzenlenmiş ve bu toplantıların sonucunda her alanda sürdürülebilir gelişme yaklaşımı benimsenmiştir. Ülkemizin de içinde bulunduğu birçok ülke dünyada enerji tüketimin ve çevre kirliğinin azaltılmasına yönelik olarak hazırlanan anlaşmalara taraf olarak konuyla ilgili iyileştirme vaadinde bulunmuştur. Ülkemizde enerji tüketimindeki en büyük payın binaların kullanımı sırasında harcanan enerjinin olduğu göz önüne alındığında enerji tüketimi ve çevreye verilen zararın azaltılmasını hedefleyen sürdürülebilir mimarlığın önemi ortaya çıkmaktadır. Bu bağlamda mimarlık alanında sürdürülebilir kent planlaması ve ekolojik yapılarla başlayan çalışmalar ve son yıllarda akıllı kentler, binalar ve yapı malzemelerine yoğunlaşmaktadır. Bina cepheleri, binaların iç mekanı ile dış ortamla arasındaki ısı, ışık, ses, hava ve görüntü iletimini sağlayan yapı kabuğu parçasıdır. Bu nedenle binalarda ısıl, görsel ve işitsel konfor üzerine doğrudan etkisi vardır. Dolayısıyla binaların kullanımı sırasında harcanan enerji miktarını ve binanın sürdürülebilirliğini doğrudan etkilemektedir. Bu çalışmada sürdürülebilirlik bağlamında akıllı cephe sistemleri tarihsel gelişim süreci içerisinde irdelendikten sonra son yıllarda akıllı cephe sistemleri ve malzemeleriyle ilgili yeni yaklaşımlar örnekler üzerinden incelenerek ele alınmıştır. Akıllı cephe sistemleri ve malzemeleriyle ilgili gelişmelerin hızlı bir şekilde süreceği ve ortaya çıkan yeni sistemlerin yaygın kullanım alanına sahip olacağı öngörülmektedir. Anahtar kelimeler: Sürdürülebilirlik, sürdürülebilir mimarlık, akıllı cepheler.
290
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
New Approaches to Smart Facade Systems and Materials Gülşen AKIN GÜLER1, Ersin GÜLER2* Anadolu University, Eskişehir, Turkey Eskişehir Osmangazi University, Eskişehir, Turkey *Responsible author e-mail:
[email protected] 1
2
Abstract After the industrial revolution, the world has faced the danger of depletion of resources with increasing energy demand. International conferences on the subject have been organized, and as a result of these meetings, sustainable development approaches have been adopted in each area. Many countries, including our country, have pledged to reduce energy consumption and environmental pollution by accessioning an agreement. Given the fact that the greatest share of energy consumption in our country is the energy consumed during the use of buildings, the prominence of sustainable architecture, which aims to reduce the energy consumption and damage to the environment, becomes prominent. In this context, the studies that started with sustainable urban planning and ecological constructions in the field of architecture and in recent years have concentrated on smart cities, buildings and building materials. The building facade is part of the building envelope that provides heat, light, sound, air and image transmission between the interior and exterior of the buildings. For this reason, there is direct influence on thermal, visual and auditory comfort in the buildings. It therefore directly affects the amount of energy consumed during the use of buildings and the sustainability of the building. In this study, smart façade systems in the context of sustainability are examined in the historical development process, and then new approaches related to smart façade systems and materials have been examined through examples in recent years. It is foreseen that the developments related to smart façade systems and materials will proceed quickly and that the emerging new systems will have widespread use. Key words: Sustainability, sustainable architecture, smart facades.
291
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Yerel Yönetimlerin Sunmuş Oldukları Sosyal ve Sağlık Hizmetlerinin Sürdürülebilir Sosyal Kalkınmaya Etkilerinin Araştırılması; Bodrum Belediyesi Örneği Ertuğrul BAYER1,*, Recep YÜKSEL2 Süleyman Demirel Üniversitesi, Eğirdir MYO, Yönetim ve Organizasyon Bölümü, Eğirdir, Isparta, Türkiye
1
Bodrum Belediyesi, Sosyal Hizmetler Müdürlüğü, Bodrum, Muğla, Türkiye
2
*
Sorumlu yazar e-posta:
[email protected]
Özet Sosyal Belediyecilik anlayışı; yerel idareye sosyal alanlarda planlama ve düzenleme işlevi yükleyen, bu çerçevede kamu harcamalarını konut, sağlık, eğitim ve çevrenin korunması alanlarını kapsayacak şekilde sosyal amaca kanalize eden; işsiz ve kimsesizlere yardım yapılması, sosyal dayanışma ve entegrasyonun tesis edilmesi ile sosyo-kültürel faaliyet ve çalışmaların gerçekleştirilebilmesi için gerekli olan altyapı yatırımlarının yapılması için bilinçli politikalar üretmesini öngören; bireyler ve toplumsal kesimler arasında zayıflayan sosyal güvenlik ve adalet mevhumunu güçlendirmeye yönelik olarak yerel idarelere sosyalleştirme ve sosyal kontrol işlevleri yükleyen bir modeldir. Sosyal belediyecilik anayasamızda yer alan sosyal devlet kavramının yereldeki tamamlayıcısıdır. Her ne kadar yerelde sosyal belediyecilik uzun yıllar algılanamamış olsa da son dönemlerde özellikle Avrupa Birliği’ne uyum sürecinde önemini artırmıştır.Belediyelerin üstlenmiş oldukları sosyal belediyecilik hizmetlerinin temel fonksiyonlarını: sosyalleştirme, sosyal kontrol ve rehabilitasyon; mobilize etme, yönlendirme, kılavuzluk ve rehberlik etme;yardım etme, koruma ve gözetme;yatırım ile belediye halk ilişki ve iletişiminin güçlendirilmesi olmak üzere beş ana grupta toplamak mümkündür. Sunulan bu hizmetlerin özellikle toplumsal refahın arttırılabilmesi açısından sürdürülebilir yerel kalkınmaya etkisi oldukça önemlidir. Belediyelerce sunulan sosyal hizmetler ile sağlık hizmetlerinin çeşitleri, yoğunluğu, kalite ve etkinliği; belediyelerin büyüklüğüne, sahip olduğu kaynak ve nitelikli personel durumuna, hizmet sunulan toplumun gelişmişlik düzeyine, yapı ve özelliklerine göre değişiklik gösterebilmektedir. Bu kapsamda belediyeler tarafından sunulan sağlık ve sosyal hizmetlerden yararlanan toplumsal kesimleri de hedef kitleler açısından: çocuklar, gençler, yaşlılar, özürlüler ile yetişkin ve muhtaçlar olmak üzere beş ana grupta toplamak mümkündür. Bu araştırmada, Bodrum Belediyesi tarafından son iki yılda (2015 ve 2016) sunulan sağlık ve sosyal hizmetlerin çeşitliliği ve sayısının tespit edilmesi ile bu hizmetlerden faydalanan bireylerin memnuniyet düzeylerinin ölçülmesi amaçlanmıştır. Bu amaçla, hizmetlerden faydalanan bireylerden basit rastgele örnekleme yöntemi ile belirlenen örneklemi oluşturan bireylere yönelik yüzyüze görüşme yöntemi ile anket uygulaması gerçekleştirilmiştir. Anket sonuçları, SPSS 23 istatistik programı kullanılarak değerlendirilmiştir. Anahtar kelimeler: Yerel yönetimler, Sürdürülebilir kalkınma, Sosyal Kalkınma, Sosyal Hizmetler, Sağlık Hizmetleri.
292
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Investigation of the Effects of Local Government Social and Health Services on Sustainable Social Development; Bodrum Municipality Example Ertuğrul BAYER1,*, Recep YÜKSEL2 1
Süleyman Demirel University, Eğirdir Vocational School, Department of Management and Organization, Eğirdir, Isparta, Turkey 2 Bodrum Municipality, Social Services Directorate, Bodrum, Muğla, Turkey * Responsible author e-mail:
[email protected]
Abstract Social municipality concept; the local authority is responsible for planning and organizing social spaces, which in this framework channel public expenditure to the socially inclusive areas of housing, health, education and protection of the environment; Foreseeing the creation of conscious policies for the making of infrastructure investments necessary for the realization of socio-cultural activities and activities, the establishment of social solidarity and integration, the provision of assistance to the unemployed and the unemployed; Social security and justice, weakening between the individual and the social sector, is a modality that imposes socialization and social control functions on local administrators. Social municipalism is the local complement of the social state concept in our constitution.Although social municipalities in the local area have not been recognized for many years, they have recently increased in importance especially in the European Union.The main functions of social municipal services that municipalities undertake: socialization, social control and rehabilitation; Mobilize, direct, guide and guide; Helping, protecting and supervising; Investment and strengthening of municipal public relations and communication are possible in five main groups.The impact of these services on sustainable local development is particularly important in order to increase social welfare. The social services offered in Belediyeler and the variety, intensity, quality and effectiveness of health services; The size of the municipalities, the availability of resources and qualified personnel, the level of development of the society in which the service is provided, and the structure and characteristics of the municipality. In this context, social groups benefiting from the health and social services offered by the municipalities can be collected in five main groups in terms of target groups: children, young people, old people, disabled people and adults and needy people. In this research, it was aimed to determine the diversity and number of health and social services offered by Bodrum Municipality in the last two years (2015 and 2016) and to measure the satisfaction level of individuals benefiting from these services. For this purpose, a questionnaire was applied to the individuals who use the services by simple random sampling method and face-to-face interview method for the individuals constituting the sampling.The survey results were evaluated using the SPSS 23 statistical program. Key words: Local governments, Sustainable development, Social development, Social services, Health services.
293
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürdürülebilir Yerel Ekonomik Kalkınma Kapsamında Üniversite Öğrencilerinin Yerel Ekonomiye Katkılarının Araştırılması; SDÜ Eğirdir MYO Örneği Ertuğrul BAYER1,* Süleyman Demirel Üniversitesi, Eğirdir MYO, Yönetim ve Organizasyon Bölümü, Isparta, Türkiye * Sorumlu yazar e-posta:
[email protected]
1
Özet Üniversite öğrencilerinin, eğitim aldıkları yöreye sosyal, kültürel, bilimsel ve özellikle ekonomik anlamda yaptıkları katkı, günümüzde yerel sosyo-ekonomik kalkınma açısından oldukça önemli hale gelmiştir. Bu araştırmada, sürdürülebilir yerel ekonomik kalkınmayaüniversite öğrencilerinin yapmış oldukları harcamaların katkısının tespit edilmesi amaçlanmıştır. Araştırmanın kapsamını, Süleyman Demirel Üniversitesi Eğirdir Meslek Yüksekokulu öğrencileri oluşturmaktadır. Araştırma kapsamında, 1385 kayıtlı, 1024 birinci ve ikinci sınıf öğrencisinden, anket uygulamasına katılmayı kabul eden 730 (%71) öğrenciye, yüzyüze görüşme yöntemiyle anket uygulaması gerçekleştirilmiştir. Anket formunu eksik dolduran 76 öğrencinin anketi iptal edilerek, toplam 654 (%63) öğrenciye uygulanan anket sonuçları değerlendirme kapsamına alınmıştır. Araştırma kapsamında; demografik bilgiler ve eğitim verilerinin tespiti, öğrencilerin yerel hizmetlere ve ekonomik ilişkilere bakış açılarının belirlenmesi, öğrencilerin gelir kalemleri ve gider/harcama kalemlerini tespit etmek amacıyla dört bölüm ve 37 sorudan oluşan anket formu kullanılmıştır. Anket sonuçları, SPSS 23 istatistik programı kullanılarak değerlendirilmiştir. Araştırmada kullanılan istatistiksel analizlerin anlamlılık derecesini belirlemede 0,05 anlamlılık düzeyi kabul edilmiştir. Araştırmada öncelikle, anketi cevaplayan öğrencileri demografik özellikleri ile anket formunun diğer bölümlerinde yer alan ifadelere katılımlarına ilişkin verilerin normal dağılım gösterip göstermediğini belirlemek amacıyla Kolmogorov-Smirnov testi uygulanmıştır. Elde edilen verilerin analizi, frekans analizleri, Mann-Whitney U testi ve Kruskall-Wallis analizleri ile gerçekleştirilmiştir. Araştırmaya katılan öğrencilerin cinsiyet dağılımına bakıldığında 246’sı (%37,6) erkek ve 408’i (%62,4) bayan öğrencilerden oluşmaktadır. Öğrencilerin 199’u (%30,6) İnsan Kaynakları Yönetimi, 131’i (%20,0) Aşçılık, 95’i (%14,5) Gıda Kalite ve Kontrol Analizi, 68’i (%10,4) Muhasebe ve Vergi Uygulamaları, 62’si (%9,5) Turizm ve Otel İşletmeciliği, 60’ı (%9,2) Büro Yönetimi ve Sekreterlik, 39’u (%6,0) Peyzaj ve Süs Bitkileri Programı öğrencilerinden oluşmaktadır. 448’i (%68,5) 21-25 yaş grubundadır. 331’i (%50,6) birinci sınıf ve 322’si (%49,2) ikinci sınıf öğrencisidir. 460’ı (%70,3) birinci öğretim ve 194’ü (%29,7) ikinci öğretim öğrencisidir. 316’sının (%48,3) Akdeniz Bölgesinden geldiği ve 416’sının (%63,6) Eğirdir’de Apart daire de kaldığı tespit edilmiştir. Araştırmanın ikinci bölümünde; öğrencilerin okul yemekhanesi ve okul kantini fiyatları, barınma fiyatları hakkındaki görüşleri, ev sahiplerinin ve esnafın tutumları ile sosyal imkanların yeterliliği hakkındaki görüşleri tespit edilmiştir. Araştırmanın üçüncü bölümünde; aile katkısı, devlet bursu, özel burs, öğrenim kredisi ve part-time çalışma katkıları açısından değerlendirme yapılarak, öğrencilerin aylık toplam gelir düzeyleri tespit edilmiştir. 294
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Araştırmanın dördüncü bölümünde ise, 18 farklı harcama kalemi açısından, öğrencilerin Eğirdir’de ki toplam harcama tutarları incelenerek; aylık ve yıllık olarak yerel ekonomiye katkıları tespit edilmiştir. Anahtar kelimeler: Yerel ekonomi, İktisadi kalkınma, Sürdürülebilir kalkınma, Öğrenci harcamaları.
295
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Investigation of LocalEconomyContributions of UniversityStudents in theScope of SustainableLocalEconomic Development; Sample of SDÜ Eğirdir Vocational School Ertuğrul BAYER1,* Süleyman Demirel University, Eğirdir Vocational School, Department of Management andOrganization, Isparta, Türkiye * Responsible author e-mail:
[email protected]
1
Abstract The contribution that university students make to their local communities in terms of social, cultural, scientific and economic sense has become very important in terms of local socio-economic development. In this study, it was aimed to determine the contribution of university students' expenditures to sustainable local economic development. The scope of the research consists of the students of Süleyman Demirel University Eğirdir Vocational School. Within the scope of the research, 730 (71%) students who accepted to participate in the survey application from 1385 registered, 1024 first and second year students were surveyed by face to face interview method. The questionnaire of 76 students who were missing the questionnaire form was canceled and 654 (63%) students were included in the questionnaire. In the scope of the research; A questionnaire consisting of four sections and 37 questions was used in order to determine demographic information and education data, to determine students' perspective on local services and economic relations, and to identify income items and expenditure / expenditure items of students. The survey results were evaluated using the SPSS 23 statistical program. A significance level of 0.05 was considered to determine the significance level of the statistical analyzes used in the study. In the study, the Kolmogorov-Smirnov test was first applied to determine whether the data on students' responses to the questionnaire included demographics and other parts of the questionnaire. Analysis of the obtained data was performed by frequency analysis, Mann-Whitney U test and Kruskall-Wallis analysis. When the gender distribution of the students participated in the research, 246 (37.6%) male and 408 (62.4%) female students were included. 199% of the students (30,6%) Human Resources Management, 131 (20,0%) Cooking, 95 (14,5%) Food Quality and Control Analysis, 68 (10,4%) Accounting And Tax Applications consist of 62 (9.5%) Tourism and Hotel Management, 60 (9.2%) Office Management and Secretariat, 39 (6,0%) Landscape and Ornamental Design Program students. 448 (68.5%) are in the 2125 age group. 331 (50,6%) are first year students and 322 (49,2%) second year students. 460 (70,3%) primary education students and 194 (29,7%) secondary education students. 316 (48.3%) were from the Mediterranean region and 416 (63.6%) were in the apartments in Egirdir. In the second part of the research; Students' opinions about school meal and school canteen prices, views on accommodation prices, attitudes of the hosts and the shopkeepers and the adequacy of social facilities. In the third part of the research; The monthly total income levels of the students were determined by making an evaluation in terms of family contribution, state scholarship, special scholarship, education loan and part-time study contribution.
296
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
In the fourth part of the study, total expenditure amounts of students in Egirdir were examined by means of 18 different expenditure items; Monthly and yearly local economy contributions have been determined. Key words: Local economy, Economic development, Sustainable development, Student expenditures.
297
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Yok-Mekandan Dokunsal Mekana Dönüşüm: Trabzon Alacahan Örneği Esra BABUL1,* Karadeniz Teknik Üniversitesi, Trabzon, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
Özet Trabzon kenti, yer almış olduğu coğrafyanın sağladığı avantajlar, sahip olduğu uzun tarihi geçmişi, çağlar boyu birçok medeniyete yapmış olduğu ev sahipliği, doğu ve batı ticaretinde önemli bir durak olması sebebiyle beraberinde birçok kültürel ve mekânsal zenginliği günümüze taşımaktadır. Ticari aktivitelerin yoğunluğu, kentte ticaret merkezinin oluşmasını sağlayarak birçok mekân türünün ortaya çıkmasını sağlamıştır. Bu oluşumların bir varyasyonu olarak ticari dokunun çekirdeğinde yer alan ve XVIII. yüzyıl yapısı olarak karşımıza çıkan Alacahan, yok-mekân kavramının yansıması olup, içinden geçilen, konaklanan deneyimlenen ancak benimsenmeyen, kullanıcının kişisel kimliği ve deneyimleri hakkında çok fazla fikir vermeyen, yaşanmışlık ve özgünlük hissinin tam olarak oluşamadığı, yabancılık hissinin yok dilemediği, tüketim toplumunun ihtiyaçlarının giderilmesine yönelik kurgulanan bir mekan üretimi olmasına rağmen son dönemde geçirmiş olduğu yenileme, farklılaştırılan mekan kurgusu ve üstlenmiş olduğu misyon ile bu algıyı değiştirerek dokunsal boyutun ön plana çıktığı bir konuma yerleşmiştir. Bireyin bedensel ve fiziksel edinimlerinin bellekte birikimi sonucu, boşluğu şekillendirme eylemi olarak karşımıza çıkan mekân kavramı, bireyin geçmiş ve gelecek arasında kurulan köprüde kendine bir yer edinmesini sağlayan olgudur. Geçmiş ile gelecek arasında sürekliliğin sağlanıp kullanıcının kendini yabancılaşma hissinden kurtararak bugüne ait hissinin ortaya çıkması bulunduğu, yer aldığı, yaşadığı, deneyimlediği mekâna dokunması ile mümkün olmaktadır. Bu dokunsalcılık kimlik ve bellek oluşumunun yanı sıra kültürel sürekliliğin sağlanması ve zaman ötesine aktarım için önemli bir basamağı temsil etmektedir. Alacahan’ın restore edilerek yeni bir işlev yüklenmesi, bireyin mekân ile kurduğu birebir ilişkinin artmasına yol açmıştır. Bu durum yapının yok mekân çıkmazından kurtarılıp, deneyimlenen, yaşanılan ve dokunulan bir mekâna dönüşmesini sağlamıştır. Çalışma yapının süreç içerisinde geçirdiği değişimler sonucu mekân birey ilişkisinin fiziksel ve anlamsal süreçte değişen kurgusunu ortaya koymayı hedeflemektedir. Anahtar kelimeler: Yok-mekan, Dokunsalcılık, Restorasyon, Alacahan,Trabzon.
298
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Transformation From Non-Place Into Tactile Place: The Trabzon Alacahan Example Esra BABUL1,* 11
Karadeniz Technical University, Trabzon, Turkey *Responsible author e-mail:
[email protected]
Abstract Due to the advantages provided by its geographical location, its long historical background, the fact that it hosted various civilizations for ages and the fact that it is a significant stop between the eastern and western trade routes, the city of Trabzon carries a range of cultural and spatial wealth from past to present. The intensity of commercial activities ensured the creation of many different space types by creating a trade center in the city. Alacahan, which confronts us as a variation of these formations as a XVIII century structure located in the core of the commercial web is the reflection of non-place as a structure that we pass through, a structure that we lodge and experience but we do not internalize, a structure that does not provide much information about the personal identity of the user, a structure where the feeling of life experience and freedom are not completely formed, where the feeling of alienation is not effaced. Despite the fact that it has been a production of space designed for the elimination of the needs of the consumer society, by changing this perception with the recent renewals it experienced, the differentiated space construction and the mission it undertook, the structure assumed a position in which the tactile dimension stands out. The concept of space, in which the corporal and physical acquisitions of the individual are confronted as the result of the accumulation of memory and the action of shaping the void, is the phenomenon that allows the individual to acquire a place in the bridge between the past and the future. The creation of the continuation between past and present and the shaping of the feeling of users’ belonging to the present by escaping the feeling of alienation is possible through touching the space they are located in, they live and they experience. This tactility represents an important step in the formation of identity and memory, as well as in the provision of cultural continuity and transcendence over time. The undertaking of a new function of Alacahan through restoration led to the increase in the one-to-one relationship between the individual and the place. This situation led to the escape of the place from the impasse of non-place and its transformation to an experienceable, livable and touchable place. The study aims to reveal the changing physical and semantic construct of the place-individual relationship as a result of the changes it experienced within time. Key words: Non-place, Tactility, Restoration, Alacahan, Trabzon.
299
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürdürülebilir Mekânlar İçin Peyzaj Planlamanın Onemi A.Esra CENGİZ1,*, Aybike Ayfer KARADAĞ2, Demet DEMİROĞLU3 Çanakkale 18 Mart Üniversitesi Mimarlık-Tasarım Fakültesi, Peyzaj Mimarlığı Bölümü, Çanakkale, Türkiye 2 Düzce Üniversitesi Orman Fakültesi, Peyzaj Mimarlığı Bölümü, Düzce, Türkiye 3 Kilis 7Aralık Üniversitesi Mühendislik-Mimarlık Fakültesi, Peyzaj Mimarlığı Bölümü, Kilis, Türkiye *Sorumlu yazar e-posta:
[email protected]
1
Özet Küresel ekonominin yönlendirdiği günümüz dünyasında, mekânsal planlamanın temel hedefi doğal süreçlerle uyumlu sürdürülebilir mekânlar oluşturmaktır. Çünkü ekonomi-ekoloji çatışması günümüzde de devam etmekte ve doğal kaynaklar hızla tüketilmektedir. Bu çalışmanın amacı sürdürülebilir mekânlar oluşturma hedefine sahip peyzaj planlamanın, sürdürülebilirliğe katkılarını ortaya koymaktır. Çalışmada tümden gelim yöntemi kullanılarak, planlamadan tasarım ölçeğine sürdürülebilirlik değerlendirilmiştir. Bulgular doğal ve kültürel verilerin, ekolojik ilkeler temelinde, bütüncül olarak değerlendirilmesini sağlayan peyzaj planlamanın, sürdürülebilir mekanlar oluşturmak için oldukça önemli bir planlama yöntemi olduğunu ortaya koymuştur. Sonuç olarak, peyzaj planlamanın ürünü olan peyzaj planları, mekânsal planlamada temel altlık olmalıdır. Anahtar kelimeler: Sürdürülebilirlik, Peyzaj Planlama, Peyzaj Mimarlığı.
300
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Importance of Landscape Planning for Sustainable Spaces A.Esra CENGİZ1,*, Aybike Ayfer KARADAĞ2, Demet DEMİROĞLU3 Çanakkale 18 Mart University Faculty of Architecture and Design, Department of Landscape Architecture, Çanakkale, Turkey. 2 Duzce University Faculty of Forestry, Department of Landscape Architecture, Düzce, Turkey 3 Kilis 7 Aralık University Faculty of Engineering and Architecture, Department of Landscape Architecture, Kilis, Turkey. *Responsible author e-mail:
[email protected]
1
Abstract In today's world driven by the global economy, the main objective of spatial planning is to create sustainable spaces that are compatible with natural processes. Because the economic-ecological conflict continues today and natural resources are rapidly consumed. The purpose of this study is to demonstrate the contribution of landscape planning,which has the goal of creating sustainable places, to sustainability. In the study, sustainability has been assessed from the planning to the design scale using the deduction method. Findings have shown that landscape planning, which allows natural and cultural data to be evaluated holistically on the basis of ecological principles, is a very important planning method for creating sustainable spaces. As a result, landscape plans, the product of landscape planning, must be the basis for spatial planning. Key words: Sustainability, Landscape planning, Landscape architecture.
301
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sustainable Transdermal Release System for Naproxen Esra GÜLER1,*, Ebru KONDOLOT SOLAK2, Gülsen ASMAN3, Seçil AKGÜL4 1,3
2,4
Gazi University, Faculty of Science, Department of Chemistry, Ankara,Turkey Gazi University, Technical Sciences Vocational School, Department of Chemistry and Chemical Processing Technologies, Ankara *Responsible author e-mail:
[email protected]
Abstract Naproxen sodium (NS) is a nonsteroidal anti inflammatory drug with analgesic properties; however, gastrointestinal side effects such as bleeding, ulceration, and perforation have been commonly seen when this drug is used in ordinary ways. For this reason, it is important to obtain prolonged or controlled drug delivery to improve the bioavailability or stability of the drug and to target the drug to a specific site. Polymeric membrane materials are available materials the release of the drugs in a controlled manner. But the type of the polymer used in such studies is very important; it should be biologically compatible and nontoxic materials. In addition to such parameter, because of environmental reasons the material used in the preparation of the membrane should be a clean type. In this study, starch which is a natural and biologically compatible polymer was preferred as a membrane material and the release of naproxen for transdermal use was studied. For this aim membranes were prepared at a predetermined thickness and the effect of starch/poly(vinyl alcohol) (PVA) and the temperature on the release profile of naproxen was studied at a pH of 7.4. The temperatures were chosen as 321, 371 and 391°C as skin temperature, normal body temperature and fewer body temperature respectively, and the effect of temperature on the release profile was clearly identified. At the end of the study it was determined that especially the temperature change is mainly affected the released amount of drug. Key words: Naproxen sodium, controlled release, transdermal, sustainable polymers.
302
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Use of Starch/PVA/Graphene Oxide Membranes for the Separation of Aceton-Water Mixtures by Evapomeation Esra GÜLER1,*, Gülsen ASMAN2, Aysel BERKKAN3 1,2
3
Gazi University, Faculty of Science, Department of Chemistry, Ankara,Turkey Gazi University Faculty of Pharmacy, Department of Analytical Chemistry, Ankara, Turkey *Responsible author e-mail:
[email protected]
Abstract Membrane based separation processes are attractive and efficient processes for removing organic volatile components from aqueous solutions. They are also energy saving and clean processes. In this study starch/ poly(vinyl alcohol) (PVA) blendcomposite membranes were prepared at a volume ratio of 70/30 starch/PVA in the presence of graphene oxide (GO). The influence of various parameters on pure water transport was studied and evapomeation method was used as a membrane separation process, in which permeate was removed at a low pressure and feed solution was kept at atmospheric pressure. Graphene oxide used in the study was synthesized by using Hummer method and different amounts of GO was mixed with the starch/PVA membrane. The amount of GO was assigned as 1% GO, 5% GO and 10% GO by mass. The more efficient ratio for the separation process was determined as 10%GO by which greater flux was obtained. The evapomeation of acetone-water mixtures was studied at a concentration of 0.5%, 1%, 3% and 5% by mass. The permeation temperature was kept constant at 40°C. At the end of the study it was determined that the presence of GO increased the permeation rate of the water and only 40°C temperature was found as a very attractive temperature the separation of acetone-water mixtures. Key words: Green chemistry, volatile organic compounds, membrane, separation.
303
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Türkiye’nin Sektörel Sera Gazı Emisyonlarının Yapay Sinir Ağları ile Tahmini Eşref BOĞAR1,*, Zeynep ÖZSÜT BOĞAR2 Pamukkale Üniversitesi, Denizli, Türkiye Pamukkale Üniversitesi, Denizli, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2
Özet Günümüzde çevresel problemler, türleri ve etkileri hissedilir bir şekilde artmaktadır. Bu tür problemlerin sonuçları sadece ülkeleri ve bölgeleri değil tüm dünyayı doğrudan ya da dolaylı olarak etkileme potansiyeline sahiptir. Bu nedenle özellikle son yıllarda çevresel problemler, sürdürülebilirlik ve bu sürecin yönetimi gibi konular kamusal, toplumsal ve akademik çevrelerin ciddiyetle üzerine çalıştıkları bir alan haline gelmiştir. İkibinli yıllarla birlikte sıkça duymaya başladığımız, iklim ve bitki örtüsü değişiklikleri, buzulların erimesi, deniz seviyelerinde değişiklik, ekosistemde farklılaşmalar gibi birçok farklı etkisini daha bugünden görmeye başladığımız küresel ısınma, çevresel problemlerin başında gelmektedir. Küresel ısınmayı tetikleyen ana etmenlerden biri sera gazlarıdır. Sanayileşmenin artmasıyla birlikte karbondioksit, metan gibi gazların atmosfere salınması da artmış, sera gazları sera etkisi yaratmada hızlandırıcı etki yaratmıştır. Ülkemizde ve dünyada sera gazı salınımının azaltılmasına yönelik çalışmalar yapılmakta, hedefler koyulmaktadır. Bu nedenlerle gelecekte beklenen sera gazı salınım miktarlarının doğru tahmin edilmesi de önem kazanmaktadır. Bu çalışmada Türkiye’de sera gazı salınım miktarları yapay sinir ağları (YSA) kullanılarak sektörler bazında tahmin edilmiştir. Enerji, endüstriyel işlemler ve ürün kullanımı, tarımsal faaliyetler ve atıklar olmak üzere dört farklı sektör dikkate alınmıştır. 1990-2015 yıllarına ait veriler kullanılarak, 2016-2030 yılları için tahminler gerçekleştirilmiştir. Nüfus, gayri safi yurtiçi hasıla, enerji tüketimi ve ulaşım için kullanılan enerji ve ayrıca sektörlere göre gerçekleşen sera gazı emisyonları YSA’yı eğitme ve test etmede kullanılmış, dört çıkışlı bir YSA modeli sunulmuştur. Ayrıca toplam sera gazı emisyon miktarı da tek çıkışlı YSA ile tahmin edilmiş, sektörlere göre tahminlerin toplamı ile kıyaslanmıştır. Önerilen modellerin performansı ortalama mutlak hata ve ortalama hata kare yöntemleriyle değerlendirilmiştir. Sonuç olarak, sürdürülebilir bir çevre için kısa, orta ve uzun vadede gerçekleştirilecek olan faaliyetlerin planlanmasında güvenilir tahmin verilerine ihtiyaç duyulacaktır. YSA’nın da bu ihtiyacı karşılamada bir alternatif yöntem olarak kullanılabileceği görülmektedir. Anahtar kelimeler: Sera gazı emisyonları, Yapay sinir ağları, Tahmin, Küresel ısınma.
304
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Estimation of Turkey's Sectoral Greenhouse Gas Emissions by Artificial Neural Networks Esref BOGAR1,*, Zeynep OZSUT BOGAR 2 1
Pamukkale University, Denizli, Turkey Pamukkale University, Denizli, Turkey *Responsible author e-mail:
[email protected] 2
Abstract Environmental problems, types and effects of these problems are noticeably increasing nowadays. Outcomes of such problems have the potential to affect not only countries and regions but also the whole world directly or indirectly. Therefore, especially in recent years, topics such as environmental problems, sustainability and management of this process have become a seriously studied field by governments, social initiatives and academes. Global warming, which we have been hearing frequently since 2000s, is one of the leading environmental problems. It has different effects such as climate and vegetation changes, melting of glaciers, changes in sea levels, differentiation in the ecosystem and etc. One of the main factors that trigger global warming is the greenhouse gases. With the rapid development of modern industry, the atmospheric release of gases such as carbon dioxide and methane has increased and the greenhouse gases make accelerating impact to creation greenhouse effect. There are different attempts and set targets are existing to reduce greenhouse gas emissions in Turkey and all over the world. Therefore, it also becomes important to estimate the amount of greenhouse gas emissions in the future. In this study, the amount of greenhouse gas emissions in Turkey is estimated for different sectors by using artificial neural networks (ANN). Four different sectors are considered, namely energy, industrial operations and product use, agricultural activities and waste. Estimations are made using data from the years 1990-2015 for the years 2016-2030. A four-output ANN model has been introduced and population, gross domestic product, energy consumption and energy use for transport as well as greenhouse gas emissions by sectors data are used to train and test processes. In addition, the total greenhouse gas emission amount is estimated by the single-output ANN and compared with the sum of the estimated amounts by sectors. Performance comparison among different models is made based on absolute and percentage mean square error. As a result, reliable estimations will be needed to plan operations for a sustainable environment in short, medium and long-term. Obtained results show that ANN can be used as an alternative method to meet this need. Key words: Greenhouse gas emissions, Artificial neural networks, Estimation, Global warming.
305
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Türkiye Net Elektrik Enerjisi Tüketiminin Parçacık Sürü Optimizasyonu Tabanlı Modellenmesi Eşref BOĞAR1,*, Zeynep ÖZSÜT BOĞAR2 1Pamukkale Üniversitesi, Denizli, Türkiye 2 Pamukkale Üniversitesi, Denizli, Türkiye *Sorumlu yazar e-posta:
[email protected]
Özet Enerjiye olan ihtiyaç gün geçtikçe artmaktadır. Elektrik enerjisi ise günlük hayatta en çok ihtiyaç duyulan enerji türüdür. Üretim, hizmet, sağlık, teknoloji gibi birçok farklı alanda elektrik enerjisinin anlık kesilmesi dahi çeşitli sorunlara ve kayıplara yol açabilmektedir. Aynı şekilde ihtiyaçtan fazla elektrik enerjisi üretimi de ekonomik olarak istenmedik bir durumdur. Sadece ekonomik etkilerinden dolayı değil, tüm dünya kaynaklarının etkin kullanımı ve sürdürülebilirliği açısından da ihtiyaç kadar elektrik enerjisi üretilmesi gerekmektedir. İhtiyaç duyulacak enerjinin tahmin edilmesi ise birçok değişkeni barındırıyor olması nedeniyle oldukça zor bir konudur. Mevcut ve gelecek dönemlerde gerçekleşecek olan ihtiyacın, tüketimi etkileyen faktörler ve katkıları cinsinden doğru bir şekilde modellenmesi gerekmektedir. Bu çalışmada Türkiye için net elektrik enerjisi tüketimi modellenmiştir. Modellemede, literatürde sıklıkla kullanılan polinomsal, Chebyshev polinomsal, sigmoid, trigonometrik, tanjant hiperbolik ve radyal tabanlı fonksiyonlar kullanılmıştır. Gayri safi yurtiçi hasıla, nüfus, ithalat ve ihracat faktörleri dikkate alınarak, bu faktörlerin elektrik enerjisi tüketimine olan etkileri fonksiyonlar aracılığıyla bulunmuştur. Parçacık sürü optimizasyonu kullanılarak da, her bir faktörün katsayısı ortalama karesel hatanın en küçüklenmesi amaçlanarak hesaplanmıştır. Hesaplamalar Türkiye İstatistik Kurumu’nun 1970-2015 yıllarına ait verileri dikkate alınarak yapılmıştır. Önerilen modellerin performansları ortalama mutlak hataya göre değerlendirilmiştir. Elektrik enerjisi tüketiminin en iyi şekilde modellenmesi için farklı fonksiyonlara bağlı modeller önerilmiş, parçacık sürü optimizasyonunun da bu fonksiyonların katsayılarını optimize etmede etkin bir yöntem olduğu görülmüştür. Anahtar kelimeler: Elektrik enerjisi tüketimi, Modelleme, Parçacık sürü optimizasyonu.
306
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Modelling Net Electricity Energy Consumption of Turkey Based on Particle Swarm Optimization Esref BOGAR1,*, Zeynep OZSUT BOGAR2 1Pamukkale University, Denizli, Turkey 2 Pamukkale University, Denizli, Turkey *Responsible author e-mail:
[email protected]
Abstract The need for energy is increasing day by day. Electricity is the most needed type of energy in daily life. Sudden breakdown of electricity in many different areas such as production, service, health, technology can lead to various problems and damages. In the same way, it is undesirable to produce electricity more than demanded in terms of economy. Not only economic effects, but also efficient use of all resources and sustainability, demanded electricity energy must be produced as needed. It is hard to estimate electricity energy demand due to including many different variables. The existing and expected future demands must be modelled accurately according to factors and contributions that affect consumption. In this study, net electricity consumption is modelled for Turkey. Polynomial, Chebyshev’s polynomial, sigmoid, trigonometric, tangent hyperbolic and radial basis functions which are preferred frequently in literature are used while modelling. Gross domestic product, population, import and export factors are taken into consideration and effects of these factors on the electricity consumption are found by functions. Additionally, coefficients of each factor is calculated to minimize mean square error by using particle swarm optimization (PSO). Data are obtained from Turkish Statistical Institute for the years 1970-2015. Performance of proposed models are evaluated based on mean absolute error technique. Different models which are depend on different functions are presented to model the electricity energy consumption in the best way and it is seen that PSO is an effective method to optimize coefficients of functions. Key words: Electricity energy consumption, Modelling, Particle swarm optimization.
307
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Effect Of Nitrogen Fertilization Rate Of Various Forage Sources On Rumen Parameters Euloge OLOMONCHİ1,*, Ali Vaiz GARİPOĞLU 2 1
2
Ondokuzmayis Univesity, Agricultural Faculty, Animal Science Department, Samsun-Turkey Ondokuzmayis Univesity, Agricultural Faculty, Animal Science Department, Samsun-Turkey *Responsible author e-mail:
[email protected]
Abstract Nitrogen fertilization allows nitrogen availability for microbial activities in the rumen. Thanks to this nitrogen, the rumen microorganisms will be able to synthesize their own proteins. This protein would then be used by the animal for producing various animal products such as milk and meat. But, this operation is far from easy for an excess of nitrogen in the rumen may cause urea poisoning. Because, the liver is unable to remove this high amount of urea. It is important to calculate the ratio between the quantities of nitrogen generated and recoverable and the quantities of nitrogen mobilized for agricultural production. In animal production, efficiency is low due to the fact that less than half of the nitrogen ingested is found in milk, eggs or meat in protein form, but a large amount of nitrogen is released to environment. Nitrogen fertilization allows an increase in the concentration of nitrogen in the plant but this implies a decrease in the concentration of soluble carbohydrates and an increase in the nitric nitrogen concentration. The use of nitrogen fertilization on pasture yield represents an important step forward in the nutrition of ruminants. The purpose of this review is to provide an overview of effect of nitrogen fertilization rate of various forage sources on rumen parameters. Key words: Nitrogen fertilization, urea, microorganisms, digestibility.
308
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Lojistik Sektöründe Sürdürülebilirlik: Yeşil Lojistik Eylül Ece DEMİR1,* Mersin Üniversitesi, Mersin, Türkiye Sorumlu yazar e-posta:
[email protected] 1
*
Özet “Sürdürülebilirlik kısıtı” özellikle 1972’de Meadow vd. tarafından Roma Kulübü için hazırlanan Büyümenin Sınırları’nın yayımlanmasıyla beraber gündeme gelmiştir. Buradaki uyarılar daha çok, kaynakların kıtlığı sorununa odaklanıyordu. Aslında o zamana kadar kaynakların sınırlı olduğu biliniyordu ancak bu sınırlara ulaşmanın henüz çok uzak olduğu düşünülüyordu. Kapitalizmin 1970’lerden bu yana girdiği krizin nedenleri ve bu krize çözüm yöntemleri hakkında çok farklı değerlendirme mevcuttur. Bu değerlendirmelerden biri sermayenin kendini yeniden üretmesi ve birikiminin hızlanmasıdır. Üretim süresi ve metaların dolaşım süresi sermayenin devir süresini belirler. Bu süre ne kadar kısa olursa kar oranı o kadar yüksek olacaktır. Bu nedenle mekansal engelleri azaltma, mekanı zaman aracılığıyla yok etme bağlamında lojistik sektörü önem kazanmaktadır. Bununla birlikte mekânsal engellerin azalması “mekan farklılığı”nın öneminin azaldığı anlamını taşımamaktadır. Aksine mekânsal engellerin kalkması ile birlikte mekânsal farklılıklara bağlı avantajlar büyük önem taşımaktadır. Yer seçiminde ulaştırma maliyetlerinin azaltılması ve zamanın kısaltılması ile yeni kar olanaklarının elde edilmesi asıl hedeftir. Bunun bir yolu üretim faktörlerine ve pazara ulaşım maliyetinin en düşük olacağı yerde üretim yapmaktır. Diğer bir yolu ise “kıt kaynakların” etkin bir şekilde kullanıldığı, ekolojik kısıta uygun yeni yollar, demiryolları, araçlar, mekanlar vs. inşa etmektir. Böylece yeni istihdam olanakları ve yeni kar olanakları sağlanmış olacaktır. Lojistik sektörü, metaların üretimi ve pazara ulaşımı anlamında bir yandan dolaşım sürecini hızlandırırken; diğer yandan sermayenin sabitlenmesi bağlamında yeni mekan üretimi ile üretim sürecinde önemli bir role sahiptir. Türkiye’de de özellikle 2008 krizinden sonra lojistik sektörüne yapılan vurgunun, gerek resmi raporlarda (onuncu kalkınma planı ve orta vadeli programlar) gerekse de sermaye çevreleri (TÜSİAD, TOBB, MÜSİAD, TİM) tarafından hazırlanan raporlarda arttığı gözlenmektedir. Bu çerçevede lojistikte bölgesel bir üs olmaya; lojistik maliyetlerinin düşürülmesi, ticaretin geliştirilmesi ve rekabet gücünün artırılmasına yönelik fiziki altyapı, başta bilgi ve iletişim teknolojileri olmak üzere teknoloji altyapısı ile lojistik imkanları arttırmaya yönelik birçok çalışma yapılmaya başlanmıştır. Bu çalışmada lojistik sektörü, sermayenin krizine spesifik olarak yeşil lojistik ile yarattığı çözüm bağlamında ele alınacaktır. Bu doğrultuda Türkiye’de bu sektördeki gelişim ve değişim, çeşitli resmi kurum ve sermaye çevreleri tarafından hazırlanan raporlar üzerinden analiz edilecektir. Anahtar kelimeler: Lojistik, Yeşil Lojistik, Sürdürülebilirlik.
309
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sustainability In Logistics Sector: Green Logistics Eylül Ece DEMİR1,* 1
Mersin University, Mersin, Turkey Responsible author e-mail:
[email protected]
*
Abstract "Sustainability constraint" is particularly come up with “The Limits to Growth” by Meadow et al. in 1972 which prepared for the Roman Club. The warnings of there were more focused on the problem of resource scarcity. In fact, it was already known that the resources were limited, but it was thought that this is too far to reach these boundaries. Since the crisis of capitalism in the 1970s, there is too much different assessment about the reason and resolving of Capitalism crisis. One of these assessments is the reproduction of capital and acceleration of capital accumulation. The production period and the circulation time of the commodities determine the period of turnover of the capital. When the time period is shorter the rate of profit will be higher. So the logistics sector is important to reduce spatial barriers and independence of the time from the space. However, the decline of spatial barriers does not mean that the importance of "spatial difference" is diminishing. On the contrary, with the remove of spatial obstacles, the advantages related to spatial differences become more important. Reducing transportation costs and shortening the time to make new profit opportunity is the main target of determine the location. One way to do is, to produce at the location where the factors of production and transportation costs are the lowest. Another way is to use "scarce resources" effectively to
build new roads, railways, vehicles, and spaces etc. which are suitable to ecological constraint. Thus new employment and new profit opportunities will be provided. The logistics sector accelerates the circulation process in terms of commodity production and transportation, and also it plays an important role in the production process with the new space production in the context of fixing the capital. In Turkey, especially after the 2008 crisis the emphasis on the logistics sector has increased. It can be seen more particularly in government reports (tenth development plan and medium term programs) as well as reports prepared by business organizations (TÜSİAD, TOBB, MUSIAD, TIM). To become a regional center in logistics in this framework; many studies have been started to increase the logistics facilities by decreasing the logistics costs, improving the trade and increasing the competitive advantage, technology infrastructure, especially information and communication technologies. In this study, the logistics sector specifically will be deal with in the context of the green logistics which created solution to the capital crises. In this direction the development and change in this sector in Turkey will be handled through the reports prepared by various official institutions and business organizations. Key words: Logistics, Green Logistics, Sustainability.
310
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Bitkisel Atık Yağların Evlerden Toplanma Mekanizmalarının Araştırılması Hakkı GÜLŞEN1,*, Fadime YİĞİT2 Harran üniversitesi, Mühendislik Fakültesi,Çevre Mühendisliği, Şanlıurfa, Türkiye Harran üniversitesi, Mühendislik Fakültesi,Çevre Mühendisliği, Şanlıurfa, Türkiye *Sorumlu yazar e-posta:
[email protected]
1 2
Özet Bitkisel yağlar mısır, fındık, ayçiçeği, zeytin, soya, pamuk, susam gibi yağlı bitki tohumlarından veya meyvelerinden elde edilen yağların genel adıdır. Rafine sanayiden çıkan tank dibi tortu ve yağlı topraklar, soap stock, kullanılmış kızartmalık yağlar, kullanım süresi geçmiş bitkisel yağlar, çeşitli tesislerin yağ tutucularından çıkan yağlar bitkisel atık yağ olarak tanımlanmaktadır. Atık yağlar ekotoksik özelliğe sahiptir, bu sebeple çevreyi kirletmekte, ekolojik dengeyi bozmaktadır. Ayrıca yeraltı sularını, toprağı kirletmektedir ve oluşan kirlilik bu doğal ortamlarda yaşayan canlı türlerine zarar vermektedir. Yerüstü sularına karışan atık bitkisel yağlar ise ötrofikasyona neden olur. Yapılan araştırmalarda atık su kirliliğinin % 25’ini kullanılmış bitkisel ve hayvansal yağların oluşturduğu saptanmıştır. Evsel bitkisel atık yağlar evlerden toplanmayıp lavabolara döküldüğü takdirde kanalizasyon sistemlerinde ve atık su arıtma tesislerinde tıkanıklıklara ve kirlilik yükünün artmasına neden olmaktadır. Yağların yapışkan yapıları itibariyle dren sistemine yapışmakta ve sıvamakta, aynı zamanda kanalizasyon boruları iç cidarına sıvanan yağ diğer maddelerin üzerine yapışmasına buda zamanla boruların yüksek oranda tıkanmasına neden olmaktadır. İşletim ve bakım maliyetinin artması nedeniyle mali yükümlülükleri de artırmaktadır. Türkiye’de yıllık yaklaşık 1,5milyon ton bitkisel yağ tüketimi vardır. Oluşan bitkisel atık yağın 350 bin ton olduğu tahmin edilmektedir. Buna göre kişi başına düşen bitkisel yağ tüketimi yaklaşık 19 kg’dır. Bitkisel atık yağlar evlerden toplanıp geri dönüşümü sağlanarak faydalı alanlarda kullanılabilir. Aynı zamanda zararlı etkileri de bu şekilde ortadan kaldırılabilir. Bu çalışmada Şanlıurfa Büyükşehir Belediyesi Karaköprü ilçesi pilot bölge olarak kullanılmıştır. Hazırlanan çalışmada bitkisel atık yağların tanımı, zararları, evlerden toplanma mekanizmaları, Şanlıurfa Karaköprü Belediyesinde yapılan çalışmalar ve bu konu hakkında ki mevzuat anlatılmıştır. Bitkisel atık yağların toplanmasının ülkemizde yeni gelişen bir kazanım olması nedeniyle halk tarafından önemi tam olarak kavranmamaktadır. Çalışmada öncelik halkın bilinçlendirilmesi ve aynı zamanda sosyal bir sorumlulukta üstlenilmiştir. Pilot bölgede dağıtılmak üzere afiş ve broşürler hazırlanmıştır. Bill boardlara afişler asılmış, okullardan aile sitelerinden randevu alınarak bitkisel atık yağların toplanmasının önemini anlatan seminerler düzenlenmiştir. Okullara, restaurantlara, öğrenci yurtlarına bidonlar bırakılmıştır. Hanelerdeki atık yağların toplanılabilmesi için çağrı merkezleri oluşturulmuş olup ayrıca yapılması planlanan projeler hazırlanmıştır. Gerekli bilgiler toplanarak ön hazırlıklara başlanmıştır. Bitkisel atık yağın endüstriyel olmayıp gıda amaçlı kullanılanı hastane, okul, otel, restaurant, öğrenci yurtları vs. yerlerde oluşur. Çalışmada Karaköprü ilçesinde bulunan 6 restaurant 1,5 aylık süreçte haftalık periyotlarla incelenip restaurantlara atık yağ bidonları bırakılmıştır. 1,5 ayın sonucunda 6 işletmede toplam olarak 245 litre bitkisel yağ 311
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
kullanılıp 82.6 litre bitkisel atık yağ oluşmuştur. Kullanılan bitkisel yağın %33.67'si kadarı atık bitkisel yağ olarak toplanmıştır. Anahtar kelimeler: Evsel Bitkisel Atık Yağ, Geri Dönüşüm, Bitkisel Atık Yağ Toplama Mekanizması, Karaköprü Belediyesi.
312
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Investigation of Collecting Mechanisms of Domestic Vegetable Waste Oils Hakkı GÜLŞEN1, Fadime YİĞİT2 Harran üniversitesi, Mühendislik Fakültesi, Çevre Mühendisliği, Şanlıurfa, Türkiye Harran üniversitesi, Mühendislik Fakültesi, Çevre Mühendisliği, Şanlıurfa, Türkiye *Responsible author e-mail:
[email protected]
1 2
Abstract Vegetable oils are the generic name of oils obtained from seeds or fruits of oil plants such as corn, hazelnut, sunflower, olive, soybean, cotton, sesame. The refined oil from tank refineries and grease soils, soap stocks, used frying oils, past vegetable oils from various refineries, oil from the oil holders of various plants are defined as vegetable waste oil. Waste oils have ecotoxic properties, which pollute the environment and disrupt ecological balance. It also pollutes underground waters, land, and the pollution that occurs harms living species that live in these natural environments. The waste vegetable oils which are mixed into the surface waters cause eutrophication. It has been determined that 25% of the wastewater pollution is caused by used vegetable and animal oils. Domestic vegetable waste oils are not collected from the houses and if they are laundered, they cause congestion and pollution load in the sewage systems and waste water treatment plants. Due to the sticky structure of the oils, it adheres to the drainage system and at the same time the sewage pipes are adhered to the other materials on the inner wall, causing the pipes to be blocked at a high rate over time. Financial liabilities are also increasing due to the increase in operating and maintenance costs. Turkey consumes about 1.5 million tons of vegetable oil annually. The resulting vegetable waste oil is estimated to be 350 thousand tons. Accordingly, consumption of vegetable oil per capita is about 19 kg. Vegetable waste oils can be collected from houses and recycled and used in useful areas. At the same time, the harmful effects can be removed in this way. In this study, Şanlıurfa Metropolitan Municipality Karaköprü District was used as pilot region. In the study, the definition of vegetable waste oils, damages, collection mechanisms from houses, work done in Şanlıurfa Karaköprü Municipality and legislation about this subject are explained. Due to the fact that the collection of vegetable waste oils is a new development in our country, the public is not fully aware of the importance. The priority in the study was to raise awareness of the public and to assume a social responsibility at the same time. Banners and brochures have been prepared to distribute in the pilot region. Bill boards were posters, seminars were organized about the importance of collecting vegetable waste oils by making an appointment from family sites. Drinks were left to schools, restaurants, student dormitories. Call centers have been set up to collect waste oils in the densities and the projects planned to be made have been prepared. Preliminary preparations have been started by collecting necessary information. Vegetable waste oil is not industrial, but used for food, hospital, school, hotel, restaurant, student dormitories etc. Occurs in places. Six restaurants located in the Karaköprü district of the study were examined weekly for a period of 1.5 months and waste oil drums were left in the restaurants. As a result of 1.5 months, 245 liters of vegetable oil was used in 6 313
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
enterprises and 82.6 liters of vegetable waste oil was formed. Up to 33.67% of the vegetable oil used was collected as waste vegetable oil. Keywords: Domestic Vegetable Waste Oil, Recycling, Vegetable Waste Oil Collection Mechanism,
314
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Kültürel Miras Kaynağı Olarak Ele Alınması Gereken Bir Değer: Geleneksel Artvin Evleri Fatih ORHAN1,* Erzincan Üniversitesi, Erzincan, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
Özet Çalışmanın temel amacı, geleneksel kültürel değerlerimizin korunması ve gelecek nesillere aktarılması açısından, mevcut değerlerimizin kültürel turizm potansiyelini ortaya koymak ve kültürel değerlerin korunması bilincinin oluşmasına katkı sağlamaktır. Önemli maddi kültür öğeleri içerisinde yer alan geleneksel kırsal meskenlerin de bu kapsamda ele alınması gerektiği düşüncesiyle; ortaya çıkmalarını sağlayan coğrafi, sosyo-kültürel ve ekonomik faktörlerin belirlenmesi ve mevcut mimari özelliklerinin belirtilen faktörlerle olan ilişkisinin analiz edilmesi hedeflenmiştir. Artvin, geçmişten beri önemli oranda göç veren bir ilimizdir. Özellikle 1980 yılından itibaren artan göç hareketi, kırsal yerleşmelerde nüfusun azalmasına sebep olmuştur. Bu durumun birçok farklı sonucu olmakla beraber, en önemli etkilerinden biri de, geleneksel kırsal meskenlere olmuştur. Ahşap kullanımının yoğun olduğu yöre meskenleri, atıl hale gelmiş ve birçoğu harabeye dönüşmüştür. Ayrıca ekonomik seviyede meydana gelen iyileşme, kırsal alanlarda yeni yapılan meskenlerin geleneksel mesken mimarisiyle uyuşmamasına ve betonarme yapılaşmanın artmasına neden olmuştur. Dolayısıyla önemli bir kültürel miras olan geleneksel kırsal meskenlerimiz yok olma tehlikesi ile karşı karşıyadır. Bizi bu çalışmayı yapmaya yönlendiren başlıca etmen de bu olmuştur. Artvin ilinde yer alan geleneksel kırsal meskenler, ilçeden ilçeye veya yöreden yöreye bazı farklılıklara sahip olmakla beraber, çevrenin doğal, kültürel ve ekonomik yapısıyla tam bir uyum içerisinde bulunmaktadır. Bir başka ifadeyle, bahsi geçen meskenler, yörenin coğrafi yapısı ile insanların yaşayış tarzının uyumu bakımından canlı birer örnektir. Sahadaki köy konutları, genellikle oda sayısının fazla olduğu iki veya üç katlı meskenler şeklindedir. Kendine özgü mimari özellik ve planlara sahiptirler. Ayrıca inşa edildikleri dönemin özelliklerini günümüze taşımaları bakımından da önemlidirler. Bu nedenle çalışmamızda kırsal meskenler, inşasında kullanılan yapı malzemesinden plan özelliklerine kadar birçok niteliği açısından farlı bakış açılarıyla ele alınmış ve korunması için yapılması gerekenler noktasında çeşitli önerilerde bulunulmuştur. Anahtar kelimeler: Geleneksel mesken, Kültürel miras, Turizm, Artvin.
315
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
A Value to be Considered as a Source of Cultural Heritage: Traditional Artvin Houses Fatih ORHAN 1,* 1
University of Erzincan, Erzincan, Turkey *Responsible author e-mail:
[email protected]
Abstract The fundamental objective of the study is to present the cultural touristic potential of our existing legacies and to contribute to raising awareness on their preservation in the context of preservation of our traditional cultural legacies and passing them on to future generations. Based on the fact that traditional rural dwellings, which are important material cultural components, should also be considered within this framework, the project aims to specify geographical, socio-cultural and economic factors that brings about these dwellings, and to analyze the relationship of the existing architectural characteristics to these factors. Throughout the history, Artvin has been a city of remarkable emigration movements. Increasing volume of emigration movements especially after 1980s, has caused population to decrease. While having many consequences, one of the critical impacts is seen on the traditional rural dwellings. Dwellings of the region that are intensively built with wood has become idle and many have fallen into ruins. Moreover, economic improvements has caused newly built rural dwellings not to be in harmony with the traditional architecture and increased the number of reinforced concrete structures. Accordingly, traditional rural dwellings, which constitute important examples of cultural heritage, are in the danger of extinction. This is the major motive behind this study. Traditional rural dwellings in Artvin province are in harmony with natural, cultural and economic structure of the region despite having differences across districts or villages. In other words, these dwellings are living examples in terms of the harmony between the geographical structure of the region and the lifestyle of people. Village dwellings in the field are generally as two or three story buildings with multi rooms. They have indigenous architectural characteristics and plans. Additionally, these dwellings have significant importance as they keep the characteristics of the period they were build up to the present day. Thus, in our study, traditional dwellings will be examined with different approaches varying from the construction material used to build them to their plan features and various suggestions have been made at the point of need to be done for protection. Key words: Traditional Dwellings, Cultural Heritage, Tourism, Artvin.
316
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Düşük Maliyetli Bir Aktif Karbon ile Sulu Çözeltiden Cr(VI) Giderimi F. Elçin ERKURT1*, Behzat BALCI2, E. Su TURAN3 1,2, 3
Çukurova Üniversitesi Mühendislik Mimarlık Fakültesi Çevre Mühendisliği Bölümü *Sorumlu yazar:
[email protected]
Özet Krom, çeşitli endüstriyel süreçlerin atıksuları vasıtasıyla sucul çevrelere ulaşmaktadır. Kromlu atıksu oluşturan endüstrilerin başında; tekstil, metal kaplama, boya ve deri endüstrileri gelmektedir. Krom sucul ortamlarda “+3” ve “+6” değerlikli formlarda bulunmaktadır. Cr+6, sucul ortamlarda başlıca olarak kromat (CrO4-) ve dikromat (Cr2O7-) formunda mevcudiyet göstermektedir. Cr+6 formları, Cr+3 formlarına kıyasla sucul ortamdaki organizmalara çok daha yüksek toksik etki göstermektedir. Bu yüzden atıksulardan Cr+6 giderimi çevre sağlığı açısından hayati proseslerden biridir. Atıksulardan Cr+6 gideriminde yaygın kullanılan yöntemlerden biri, kimyasal çöktürme yöntemidir. Ancak bu yöntem sonucunda, oldukça fazla miktarlarda ve toksik olan inorganik çamur oluşumu söz konusudur. Bunun yanında adsorpsiyon yöntemi ile atıksulardan krom giderimi, etkili ve hızlı sonuçlar vermesinden dolayı önem arz etmektedir. Adsorpsiyon sistemlerinde en yaygın kullanılan adsorbent aktif karbondur. Aktif karbon, yüksek yüzey alanı, uygun gözenek çapı dağılımı ve değişken yüzey karakteristiğinden dolayı kirleticilerin atıklardan gideriminde tercih edilmektedir. Bunun yanında, aktif karbonun kömür gibi pahalı hammaddelerden üretimi, yüksek maliyetleri ortaya çıkarmakta ve bu durum aktif karbon kullanımını belirli ölçüde sınırlamaktadır. Son yıllarda araştırmacılar sürdürülebilir, ucuz ve toksik olmayan hammaddelerden etkili aktif karbon üretimi üzerine yoğunlaşmışlardır. Bu çalışmada, Cr+6’nın, Eucalyptus camaldulensis kabuklarından elde edilmiş olan ve NaOH ile aktive edilmiş aktif karbon (ECAK) ile, değişen parametreler altında adsorpsiyon ile sulu fazdan Cr+6 giderimi araştırılmıştır. Eucalyptus kabukları, yaygın ve büyük miktarlarda bulunması ve yenilenebilen bir karakterde olmasından dolayı düşük maliyetli hammadde olarak tercih edilmiştir. Ayrıca Eucalyptus ağacı, kağıt üretiminde çok tercih edilen bir ağaç olup, kağıt hamuru üretiminde ağaç kütüklerinin kabuklarını soyma işlemi neticesinde çok büyük miktarlarda Eucalyptus kabuğu elde edilmektedir. Bu durum aktif karbon üretiminde Eucalyptus camaldulensis kabuklarının düşük maliyetli ve sürdürülebilir bir hammadde kaynağı olabileceğini ortaya koymaktadır. Eucalyptus kabukları, Çukurova Üniversitesi Balcalı Kampüsündeki ağaçlardan toplanmıştır. Kabuklar parçalanarak, karbonizasyon işlemi için kül fırınında 400°C’de, 3 saat süre ısıl işleme tabi tutulmuştur. 10 g karbonize edilmiş malzeme, 4 N, 500 mL NaOH çözeltisinde, 80 °C’de sıvı faz tamamen buharlaşana kadar karıştırılmıştır. Kimyasal olarak aktive edilen karbon 600°C’de, 2 saat boyunca yeniden ısıl aktivasyona tabi tutulmuştur. Cr+6 stok çözeltisi, K2Cr2O7 kullanılarak distile su ile hazırlanmıştır. Sulu fazdaki Cr+6 konsantrasyonları, difenilkarbazid yöntemiyle 540 nm dalga boyunda, spektrofotometre kullanılarak tespit edilmiştir. Cr+6’nın ECAK tarafından adsorpsiyonla giderilmesi süreci üzerine temas zamanının (5-60 dk.), pH’ın (2-6), çözelti sıcaklığının (10-40 °C), ve başlangıç Cr+6 konsantrasyonunun (10-50 mg/L) etkisi araştırılmıştır. Deneysel aşamalarda 0,1 gram ECAK dozu kullanılmıştır. Yapılan adsorpsiyon çalışması 317
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
kesikli süreç olup, 500 mL erlenmayerlerde ve 150 mL hacminde sulu çözeltide gerçekleştirilmiştir. Adsorpsiyon süreci üzerine pH parametresinin etkisinin araştırıldığı deneysel çalışma, 20 mg/L Cr+6 ile 20 °C’de gerçekleştirilmiştir. Çalışmalar ECAK ile Cr+6 giderimi üzerine, pH parametresinin büyük ölçüde etki ettiğini göstermiştir. Tüm pH değerlerinde adsorpsiyon sürecinin dengeye ulaşması yaklaşık 50 dakika sürmüştür. pH 2’de ECAK’ın Cr+6 için adsorpsiyon kapasitesi 22,8 mg/g bulunurken, pH 6’da 3,11 mg/g olarak tespit edilmiştir. Çalışılan pH aralıkları için, pH değeri artıkça Cr+6 giderim verimleri önemli ölçüde azaldığı görülmüştür. Sulu fazdan Cr+6 giderim verimleri pH 2, 3, 4, 5 ve 6 için sırasıyla % 76,5, 61,2, 39,3, 15,4 ve 10,3 olarak bulunmuştur. +6 değerlikli krom, sulu fazda HCrO4-, CrO4-2 ve Cr2O7-2 formlarında bulunmaktadır. Asidik koşullarda Cr+6 ağırlıklı olarak HCrO4- formunda bulunur ve pH yükseldikçe kromat (CrO4-2) iyonu formuna dönüşmektedir. CrO4-2 iyonu, adsorbe olması için iki negatif yükünden dolayı karbon yüzeyinde iki aktif bölgeye gereksinim duymaktadır. Bunun yanında HCrO4iyonu için bir aktif bölge yeterlidir. Asidik koşullarda ECAK’ın adsorpsiyon kapasitesinin yüksek olmasının, bu pH değerlerinde, kromun ağırlıklı olarak HCrO4- iyon formunda bulunmasından kaynaklandığı öne sürülebilir. Ayrıca asidik koşullarda H+ iyonlarının adsorbent yüzeyindeki negatif yükleri nötralize etmesine bağlı olarak, krom iyonlarının adsorbent yüzeyine difüzyonunun artmasının, yüksek adsorpsiyon kapasitesini açıklayabilmede önemli bir mekanizma olabileceği düşünülmektedir. Sürecin termodinamiği üzerine yapılan araştırmalar, ECAK’ın adsorpsiyon kapasitesinin, sıcaklığın artmasıyla arttığını, yani sürecin endotermik bir süreç olduğunu göstermiştir. pH 2’de gerçekleştirilen sıcaklık deneyleri sonucunda ECAK adsorpsiyon kapasitesi 10 °C’de 13,32 mg/g olarak bulunurken, 40°C’de 46,8 mg/g olarak bulunmuştur. Yüksek sıcaklıklarda yüksek adsorpsiyon kapasitesinin, sıcaklığın artmasıyla, krom iyonlarının mobilitesinin ve karbon yüzeyindeki aktif bölgelerin artmasına bağlı olduğu düşünülmektedir. Adsorpsiyon süreci üzerine krom iyonu konsantrasyonunun etkisinin araştırıldığı deneysel süreç, pH 2 ve 40 °C’de gerçekleştirilmiştir. Krom konsantrasyonunun artmasıyla adsorpsiyon kapasitesinin arttığı ve sulu fazdan krom giderim verimlerinin azaldığı görülmüştür. Bu durum, krom konsantrasyonuna bağlı olarak katı ve sıvı fazlardaki gradyan değişimine bağlı olarak beklenen bir sonuçtur. 10 mg/L krom konsantrasyonu için adsorpsiyon kapasitesi 13,32 mg/g tespit edilirken, 50 mg/L krom için 41,25 mg/g olarak hesaplanmıştır. Bunun yanında 10 ve 50 mg/L krom konsantrasyonları için 0,1 gram ECAK ile sulu fazdan giderim verimleri sırasıyla %88 ve % 55 olarak bulunmuştur. Adsorpsiyon deneylerinden elde edilen veri, adsorpsiyon süreçlerini açıklamada yaygın olarak kullanılan Langmuir ve Freundlich izotermlerine uygulanmıştır. Tek tabakalı adsorpsiyon süreçlerini açıklamada başarı gösteren Langmuir izotermi, 0,963 olan orta derecede bir korelasyon katsayısı ile ECAK’ın maksimum adsorpsiyon kapasitesini 63,77 mg/g olarak tahmin etmiştir. Bunun yanında heterojen sistemleri açıklamada kullanılan Freundlich izotermi 0,994 olan oldukça yüksek bir korelasyon katsayısı ile süreci başarılı bir şekilde tanımlamış ve adsorpsiyonun elverişli bir süreç olduğunu göstermiştir. Eucalyptus camaldulensis kabuklarından elde edilen aktif karbon ile sulu fazdan adsorpsiyonla Cr+6 giderimi süreci üzerine yapılan çalışmalar sonucu, süreç üzerine pH’ın, sıcaklığın ve başlangıç Cr+6 konsantrasyonunun etki ettiği görülmüştür. Bu parametreler arasında pH’ın adsorpsiyon verimini belirlemede en etkin parametre olduğu tespit edilmiştir. Yapılan çalışmalar, düşen pH, artan sıcaklık ve Cr+6 konsantrasyonu ile adsorpsiyon kapasitesinin arttığını göstermiştir. Çalışmadan elde edilen sonuçlar, Eucalyptus camaldulensis kabuklarının aktif karbon üretiminde düşük maliyetli ve 318
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
sürdürülebilir bir kaynak olduğunu ve kabuklardan üretilen aktif karbon ile Cr+6’nın sulu fazdan etkili bir şekilde giderilebildiğini göstermiştir. Anahtar Kelimeler: Eucalyptus camaldulensis, Krom, Adsorpsiyon.
319
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Removal of Cr(VI) from Aqueous Solution by a Low Cost Activated Carbon F. Elcin ERKURT1,*, Behzat BALCI2, E. Su TURAN3 1,2, 3
Cukurova University, Department of Environmental Engineering *Responsible author e-mail:
[email protected]
Abstract Chromium reaches to water bodies by wastewater produced from various industrial processes. The main industries produced chromium containing wastewater are textile, metal, dye, tanning industries. Chromium exists in two oxidation stages, Cr(III) and Cr(VI). Cr(VI) generally exists as CrO4- and Cr2O7- form in water bodies. The Cr(VI) forms are more toxic to aquatic organisms than the Cr(III) ions. Therefore, removal of Cr(VI) from wastewater is a vital process for environmental health. Chemical sedimentation method is widely used for removal of chromium from wastewater. On the other hand, the main disadvantage of chemical sedimentation is producing toxic and inorganic sludge in enormous amounts. Adsorption is an effective process for removal of chromium from wastewater. Activated carbon is one of the most popular and widely used adsorbent due to the high surface area, pore size distribution and variable surface characteristic. On the other hand, application of commercially activated carbon remains limited due to the high cost resulting from production of activated carbon from expensive materials such as coal. Recently, researchers focused on producing low cost and effective activated carbon. The main objective of this study is to evaluate the adsorption potential of an activated carbon produced from Eucalyptus camaldulensis barks (ECAC) for Cr(VI). The Eucalyptus camaldulensis barks were selected as an activated carbon precursor due to their renewable character, wide availability and easy collection. Eucalyptus is known worldwide as a source of fiber for the pulp and paper industry. Moreover, the abundant amounts of barks are produced during the debarking process. Therefore, Eucalyptus barks possess a low cost and sustainable source for production of activated carbon. Eucalyptus camaldulensis barks were collected from the campus of Cukurova. The barks were washed with water to remove impurities and dried at 60°C for 48 hours. Then the material was carbonized at 400°C for three hours with 15°C/min heating rate. NaOH was used for the chemical activation of carbonized barks. 4 N NaOH (500 mL) was used for impregnation of 10 g carbonized barks at 80°C until the liquid phase evaporated. Chemically activated material was washed with distilled water and thermally reactivated at 600°C for two hours. ECAC was cooled at room temperature, crushed and sieved to desired particle sizes. The stock solution of Cr(VI) was prepared by dissolving desired amounts of K2Cr2O7 in distilled water. The Cr(VI) concentrations were measured to diphenylcarbazide spectrophotometry using a visible spectrophotometer at 540 nm. The effect of contact time (5-60 min.), pH (2-6), solution temperature (10-40 °C) and initial Cr(VI) concentration (10-50 mg/L) on adsorption process were investigated. 0.1 g ECAC dosage was used in all experiments. The adsorption experiments were performed under batch experiment conditions. 500 mL Erlenmeyer flasks were used each containing 150 mL Cr(VI) solutions. 320
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The investigation of effect of pH was performed with 20 mg/L Cr(VI) at 20 °C. The experiments showed that pH had a significant effect on adsorption process. The equilibrium times were determined 50 min. for all pH values. While the adsorption capacity of ECAC for Cr(VI) was found to be 22.8 mg/g, it was found to be 3.11 mg/g for pH 6. The experiments showed that the Cr(VI) removal efficiencies significantly decreased with increasing pH. The removal efficiencies were found to be 76.5, 61.2, 39.3, 15.4 and 10.3 % for pH 2, 3, 4, 5 and 6, respectively. Cr(VI) exists in different forms in aqueous solution such as HCrO4-, CrO4-2 and Cr2O7-2. At low pH values Cr(VI) mainly exists in HCrO4- form and predominant form shifts to CrO4-2 ion as pH increases. CrO4-2 ion needs two active sites due to its two minus charges, whereas HCrO4- needs only one active site on activated carbon. Its thought to be higher removal efficiencies were obtained at acidic pH values is due to more HCrO4- ions formed with decreasing pH. Additionally, surface of ECAC becomes more positively charged by decreasing pH. This causes increased diffusion of Cr(VI) ions to ECAC surface. It was found that the adsorption capacity increase with increasing temperature which indicates that the adsorption of Cr(VI) on to ECAC was an endothermic process. The adsorption capacity was found to be 13.32 mg/g for 10 °C. İt was found to be 46.8 mg/g for 40 °C. Higher adsorption capacities at higher temperatures may be due to the increasing mobility of Cr(VI) ions. Also the number of active sites of ECAC may increase with increasing temperature. The experiments which focused on the investigation of effect of Cr(VI) concentration on adsorption were performed at pH 2 and 40 °C. The experiments showed that the adsorption capacity increased with increasing Cr(VI) concentration and Cr(VI) removal efficiencies increased with decreasing initial Cr(VI) concentration. While the adsorption capacity of ECAC was found to be 13.32 mg/g for 10 mg/L Cr(VI), it was found to be 41.25 mg/g for 50 mg/L Cr(VI). Also the removal efficiencies were found to be 88 % and 55% for 10 and 50 mg/L Cr(VI), respectively. The Langmuir and Freundlich isotherms were evaluated for description of the adsorption process. The Langmuir isotherm predicted 63.77 mg/g maximum adsorption capacity with a moderate correlation coefficient (0.963). The Freundlich isotherm described the adsorption process better than Langmuir isotherm with 0.994 correlation coefficient. The experiments showed that pH, temperature and initial Cr(VI) concentration had a significant effect on adsorption of Cr(VI) onto ECAC. The experiments showed that the adsorption capacity increased with decreasing pH, increasing temperature, and increasing Cr(VI) concentration. ECAC was found to be an effective adsorbent for removal of Cr(VI) from aqueous solution. Therefore, Eucalyptus camaldulensis barks possess a potential low cost and sustainable source for production of effective activated carbon. Key words: Eucalyptus camaldulensis, Chromium, Adsorption.
321
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Investigation of Collecting Mechanisms of Domestic Vegetable Waste Oils Fadime YİĞİT1,*, Hakkı GÜLŞEN2 Harran üniversitesi, Mühendislik Fakültesi, Çevre Mühendisliği, Şanlıurfa, Türkiye Harran üniversitesi, Mühendislik Fakültesi, Çevre Mühendisliği, Şanlıurfa, Türkiye *Responsible author e-mail:
[email protected]
1 2
Abstract Vegetable oils are the generic name of oils obtained from seeds or fruits of oil plants such as corn, hazelnut, sunflower, olive, soybean, cotton, sesame. The refined oil from tank refineries and grease soils, soap stocks, used frying oils, past vegetable oils from various refineries, oil from the oil holders of various plants are defined as vegetable waste oil. Waste oils have ecotoxic properties, which pollute the environment and disrupt ecological balance. It also pollutes underground waters, land, and the pollution that occurs harms living species that live in these natural environments. The waste vegetable oils which are mixed into the surface waters cause eutrophication. It has been determined that 25% of the wastewater pollution is caused by used vegetable and animal oils. Domestic vegetable waste oils are not collected from the houses and if they are laundered, they cause congestion and pollution load in the sewage systems and waste water treatment plants. Due to the sticky structure of the oils, it adheres to the drainage system and at the same time the sewage pipes are adhered to the other materials on the inner wall, causing the pipes to be blocked at a high rate over time. Financial liabilities are also increasing due to the increase in operating and maintenance costs. Turkey consumes about 1.5 million tons of vegetable oil annually. The resulting vegetable waste oil is estimated to be 350 thousand tons. Accordingly, consumption of vegetable oil per capita is about 19 kg. Vegetable waste oils can be collected from houses and recycled and used in useful areas. At the same time, the harmful effects can be removed in this way. In this study, Şanlıurfa Metropolitan Municipality Karaköprü District was used as pilot region. In the study, the definition of vegetable waste oils, damages, collection mechanisms from houses, work done in Şanlıurfa Karaköprü Municipality and legislation about this subject are explained. Due to the fact that the collection of vegetable waste oils is a new development in our country, the public is not fully aware of the importance. The priority in the study was to raise awareness of the public and to assume a social responsibility at the same time. Banners and brochures have been prepared to distribute in the pilot region. Bill boards were posters, seminars were organized about the importance of collecting vegetable waste oils by making an appointment from family sites. Drinks were left to schools, restaurants, student dormitories. Call centers have been set up to collect waste oils in the densities and the projects planned to be made have been prepared. Preliminary preparations have been started by collecting necessary information. Vegetable waste oil is not industrial, but used for food, hospital, school, hotel, restaurant, student dormitories etc. Occurs in places. Six restaurants located in the Karaköprü district of the study were examined weekly for a period of 1.5 months and waste oil drums were left in the restaurants. As a result of 1.5 months, 245 liters of vegetable oil was used in 6 322
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
enterprises and 82.6 liters of vegetable waste oil was formed. Up to 33.67% of the vegetable oil used was collected as waste vegetable oil. Key words: Domestic Vegetable Waste Oil, Recycling, Vegetable Waste Oil Collection Mechanism, Karaköprü Municipality.
323
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Armut Psillidi, Cacopsylla pyri (L.) (Hemiptera: Psyllidae)’nin Kışlık-Form Erginlerine Karşı Yumurta Bırakmayı Engelleyiciler ve Yumurta Öldürücüler Olarak Bitkisel Uçucu Yağlar Fedai ERLER1,*, Hilal Şule TOSUN1, Barış İMREK1, Halil GÜVEN Akdeniz Üniversitesi, Ziraat Fakültesi, Bitki Koruma Bölümü, Antalya, Türkiye *Sorumlu yazar e-posta:
[email protected]
1
Özet Armut psillidi, Cacopsylla pyri (L.) (Hemiptera: Psyllidae), Türkiye’de armudun en önemli zararlısı konumunda olup, mücadelesinde genelde sentetik kimyasal ilaçlar kullanılmaktadır. Kimyasal pestisitlerin yoğun kullanımı, çevre kirliliği, zararlı popülasyonlarında pestisitlere direnç, üründe kalıntı ve hedef dışı organizmalara toksisite gibi pek çok problem ortaya çıkmaktadır. Son yıllarda bitkilerde doğal olarak bulunan bazı
bileşiklerin sentetik pestisitlere alternatif olarak kullanılabilme olanaklarıyla ilgili çalışmalar önem kazanmış olup, bu çalışmada bazı bitkilerin (biberiye, nane, anason, rezene, bergamot ve turunç) uçucu yağlarının zararlının kışlık-form erginlerine karşı yumurta bırakmayı engelleyici ve yumurta öldürücü etkileri laboratuvarda in vivo şartlarda araştırılmıştır. Her iki testte de, uçucu yağların tek dozu (120 µl l-1 su) kullanılmıştır. Uçucu yağların yumurta bırakmayı engelleyici etkileri 2 haftalık bir ovipozisyon periyodu sonunda, ovisidal etkileri ise 10 günlük bir süre sonunda belirlenmiştir. Yumurta bırakmayı engelleyici etki testlerinden elde edilen sonuçlara göre, biberiye hariç tüm yağlar uygulamadan 1 gün sonra yapılan sayımda %100 bir engelleyici etki göstermiştir. Turunç yağı, uygulamadan 3 gün sonraki sayımda %100 engelleme gösteren tek yağ olmuş, ancak bu etki 7, 10 ve 14 gün sonraki sayımlarda hızlı bir şekilde düşmüştür. Uçucu yağlardan rezene, tüm sayımlar boyunca en kararlı etkiyi göstermiş olup, uygulamadan 10 gün sonraki sayımda bile %50’nin üzerinde engelleyici etki gösterebilen tek uçucu yağ olmuştur. Birinci günkü sayım dışında, nane yağı tüm sayımlarda en düşük engelleyici etkiye sahip yağ olmuştur. Ovisidal etki testlerinde ise, uygulamadan 3 gün sonraki sayımda nane ve biberiye dışında tüm yağlar zararlının 0-48 saatlik yumurtalarında %87.5-%89.3 arasında değişen ölümlere neden olmuş, ancak 7 ve 10 gün sonraki sayımlarda tüm yağların etkinliği ani olarak düşmüştür. Tüm bu sonuçlar, ekolojik olarak sürdürülebilir bir tarım çerçevesinde söz konusu uçucu yağların armut psillidinin erken dönem mücadelesinde kimyasallara alternatifler olabileceğini göstermektedir. Anahtar kelimeler: Armut psillidi, Cacopsylla pyri, uçucu yağlar, yumurta bırakmayı engelleyici etki, yumurta öldürücü etki.
324
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Plant Essential Oils as Oviposition Deterrents and Ovicides Against Pear Psylla, Cacopsylla pyri (L.) (Hemiptera: Psyllidae) Fedai ERLER1,*, Hilal Şule TOSUN1, Barış İMREK1, Halil GÜVEN1 1
Akdeniz University, Faculty of Agriculture, Department of Plant Protection,Antalya, Turkey *Responsible author e-mail:
[email protected]
Abstract Pear psylla, Cacopsylla pyri (L.) (Hemiptera: Psyllidae) is the most important pest of pears in Turkey, and synthetic chemical insecticides are generally used in its control. The intensive use of chemical pesticides results in many problems such as environmental pollution, pesticide resistance in pest populations, residue on product and toxicity to nontarget organisms. In recent years, studies on the possibility of using some compounds naturally found in plants as an alternative to synthetic pesticides have gained importance, and in this study, oviposition deterrent and ovicidal effects of some plant essential oils (rosemary, mint, anise, fennel, bergamot and bitter oranges) against winter-form adults of the pest were investigated under in vivo conditions in the laboratory. In both tests, only one dose (120 μl l-1 water) of each essential oil was used. The oviposition deterrent effects of essential oils were determined at the end of a 2-week oviposition period, while the ovicidal effects were determined after a 10-day period. According to the results obtained from the oviposition deterrence tests, all the oils except for rosemary showed a deterrence effect of 100% on the 1st day after application. The citrus oil was the only oil that showed 100% oviposition deterrence 3 days after application, but this effect quickly decreased on the 7th, 10th and 14th days after application. Of all the essential oils tested, fennel showed the most stable effect during all the count times, and became the only essential oil showing an oviposition deterrent effect of over 50% even after 10 days later. Except for the first day count, mint oil had the lowest deterrent effect at all the count times. In the ovicidal efficacy tests, all the oils except for mint and rosemary caused mortalities ranging from 87.5% to 89.3% in the 0-48 h-old eggs of the pest 3 days after application, but the activity of all the oils sharply decreased in the 7th and 10th day counts. All these results suggest that the essential oils in ecologically sustainable agriculture may be alternatives to chemical insecticides in the control of pear psylla in early season. Key words: Pear psylla, Cacopsylla pyri, essential oils, oviposition deterrent effect, ovicidal effect.
325
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Nohut Genotiplerinin Baklagil Tohumböceği, Callosobruchus chinensis L. (Coleoptera: Bruchidae)’e Karşı Dayanıklılık Bakımından Değerlendirilmesi Fedai ERLER2,*, Tuba EKER1, Barış İMREK2, Halil GÜVEN2, Cengiz TOKER1, Hilal Şule TOSUN2, Duygu SARI1, Hatice SARI1, Alper ADAK1 Akdeniz Üniversitesi, Ziraat Fakültesi, Tarla Bitkileri Bölümü, Antalya, Türkiye Akdeniz Üniversitesi, Ziraat Fakültesi, Bitki Koruma Bölümü, Antalya, Türkiye *Sorumlu yazar: e-posta:
[email protected]
1
2
Özet Nohut (Cicer arietinum L.) Türkiye’de önemli bir baklagil ürünüdür. Depolama sırasında, bu ürün bazı bruchid (tohumböcekleri) türleri, özellikle de Baklagil tohumböceği, Callosobruchus chinensis L. (Coleoptera: Bruchidae), tarafından ürünün kalitesi ve besin değeri ile miktarında kayıplara neden olan ağır saldırıya uğramaktadır. Bu çalışmada, 14 nohut genotipi (5 Cicer reticulatum: AWC-600, AWC-601, AWC-610, AWC-611 ve AWC-612; 4 Cicer echinospermum: AWC-303, AWC-304, AWC-305 ve AWC-306; 3 ‘kabuli’ tip: CA-2969, YAR ve ILC-8617; 2 ‘desi’ tip: ICC-12422 ve ICC4957)’nin daneleri C. chinensis’e dayanıklılıkları bakımından laboratuvarda hem ‘seçenekli’ hem de ‘seçeneksiz’ testlerde değerlendirilmiştir. Çalışmada genotipler, dayanıklılığın işareti olan; ovpozisyon (dane başına bırakılan yumurta sayısı), ergin çıkışı (dane başına delik sayısı), zarar gören dane oranı ve dane ağırlık kaybı (%) bakımlarından değerlendirilmişlerdir. Her iki testten elde edilen sonuçlar, ovpozisyonun, ergin çıkışının, dane zararı ve ağırlık kaybının nohut genotipleri arasında önemli ölçüde (P<0.05) değiştiğini ortaya çıkarmıştır. Yumurta sayımlarımda, C. echinospermum genotiplerine hem ‘seçenekli’ hem de ‘seçeneksiz’ testlerde C. chinensis erginleri tarafından hiçbir yumurtanın bırakılmadığı görülmüştür. En fazla ovipozisyon ise ‘kabuli’ tip genotiplerde, özellikle YAR’da gerçekleşmiştir (‘seçenekli’ testte 25.1, ‘seçeneksiz’ testte ise 11.2 yumurta/dane). Ergin çıkışı bakımından, genotipler arasında yumurta sayısındakine benzer bir durum görülmüştür. Zarar görmüş dane oranına gelince, C. echinospermum genotiplerinde hem ‘seçenekli’ hem de ‘seçeneksiz’ testlerde hiçbir zarar görülmemiştir. C. reticulatum genotipleri ise hem ‘desi’ hem de ‘kabuli’ tip genotiplerden daha az zarara uğramıştır. En fazla zarar ise ‘kabuli’ tiplerde, özellikle YAR genotipinde (%100) görülmüştür. Dane ağırlık kaybı dikkate alındığında, C. echinospermum genotiplerinde hem ‘seçenekli’ hem de ‘seçeneksiz’ testlerde hiç ağırlık kaybı meydana gelmezken, en fazla ağırlık kaybı ‘seçenekli’ testlerde ‘kabuli’ tip bir genotip olan CA-2969’da (%28.58), ‘seçeneksiz’ testlerde ise ‘desi’ tip bir genotip olan ICC-4957’da (%26.48) görülmüştür. Tüylü, buruşuk/ağsı ve koyu renk daneli genotiplere düşük sayıda yumurta bırakıldığından, konukçu seçimi ve ovipozisyon bakımından zararlının tercihi bir dereceye kadar duyusal (algısal) gibi görünmüştür. Tüm bu sonuçlar, ekolojik olarak sürdürülebilir bir tarım çerçevesinde dayanıklı varyetelerin tohumböceklerine karşı mücadele amacıyla ıslah çalışmalarında gen kaynağı olarak kullanılabileceğini göstermektedir. Anahtar kelimeler: Nohut, Cicer arietium, Baklagil tohumböceği, Callosobruchus chinensis, dayanıklılık.
326
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Evaluation of Chickpea Genotypes For Resistance Against The Pulse Beetle, Callosobruchus chinensis L. (Coleoptera: Bruchidae) Fedai ERLER2,*, Tuba EKER1, Barış İMREK2, Halil GÜVEN2, Cengiz TOKER1, Hilal Şule TOSUN2, Duygu SARI1, Hatice SARI1, Alper ADAK1 1
1
Akdeniz University, Faculty of Agriculture, Department of Field Crops, Antalya, Turkey Akdeniz University, Faculty of Agriculture, Department of Plant Protection, Antalya, Turkey *Responsible author: e-mail:
[email protected]
Abstract Chickpea (Cicer arietinum L.), is an important pulse crop in Turkey. During storage, this pulse crop is severely attacked by some bruchid species, especially the Pulse beetle, Callosobruchus chinensis L. (Coleoptera: Bruchidae), resulting in losses in quality and food value as well as quantity. In the present study, grains of 14 chickpea genotypes (5 Cicer reticulatum: AWC-600, AWC-601, AWC-610, AWC-611 and AWC-612; 4 Cicer echinospermum: AWC-303, AWC-304, AWC-305 and AWC-306; 3 ‘kabuli’ types: CA-2969, YAR and ILC-8617; 2 ‘desi’ types: ICC-12422 and ICC-4957) were screened for their resistance to C. chinensis in both ‘free-choice’ and ‘no-choice’ tests in the laboratory. In the study, genotypes were evaluated in terms of oviposition (egg number per grain), adult emergence (number of holes per grain), damaged grain ratio and grain weight loss (%). The results of both tests revealed that oviposition by the beetle, adult emergence, grain damage and weight loss varied significantly (P<0.05) among the chickpea genotypes. In the egg counts, it was seen that no eggs were laid by C. chinensis adults to the C. echinospermum genotypes in both ‘free-choice’ and ‘no-choice’ tests. The highest rate of oviposition occurred in ‘kabuli’ type genotypes, especially in YAR (25.1 in ‘free-choice’ test and 11.2 eggs/grain in ‘no-choice’ test). In terms of adult emergence, a similar pattern was observed among the genotypes. As for the damaged grain ratio, no damage has been observed in both ‘free-choice’ and ‘no-choice’ tests in C. echinospermum genotypes. The C. reticulatum genotypes had less damage rates than both ‘desi’ and ‘kabuli’ type genotypes. The highest damage rate was seen in ‘kabuli’ types, especially in the YAR genotype (100%). Considering grain weight loss, no weight loss occurred in C. echinospermum genotypes in both ‘free-choice’ and ‘no-choice’ tests whereas the highest weight loss was seen in the ‘kabuli’ type genotype, CA-2969 (28.58%) in ‘free-choice’ test and in the ‘desi’ type genotype, ICC-4957 (26.48%) in ‘nochoice’ tests. The preference of the bruchid for host selection and oviposition seemed to be sensory to a larger extent as low number of eggs were laid on hairy, wrinkled/reticulated and dark grain genotypes. All these results suggest that, in the context of ecologically sustainable agriculture, such resistant varieties can be used as gene sources in breeding trials with the purpose of management against bruchids. Key words: Chickpea, Cicer arietium, Pulse beetle, Callosobruchus chinensis, resistance.
327
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürdürülebilir Çevre Yönetiminde Göller Bölgesi ve STK ların Rolü: GÖLDOSK Örneği Fikret Yurtaslan1,*, Zeynep Korkmaz1, Selçuk Çömlekçi1 GÖLDOSK, Göller Bölgesi Doğa Sporları Kulübü Sorumlu yazar e-posta:
[email protected],
[email protected] 1
*
Özet
Canlılar içerisinde çevre ile sürekli etkileşim içerisinde bulunan ve çevreyi etkileyen varlık insandır. Sanayi ve teknolojinin devreye girmesiyle çevre ve ekolojiyi tehdit eden sorunların çözümü ve yönetimi için sürdürülebilir çevre ve sürdürülebilir kalkınma anlayışı ortaya çıkmıştır. İnsanlık varoluşundan beri sürekli değişim içerisindedir. Değişmek, vazgeçilmez bir süreçtir, ancak değişimin boyutu, koşulları ve sonuçları dikkate alındığında, yapılan değişimlerin çevrenin uyumunu olumsuz etkilememesi için sürdürülebilir olanların korunması ve sürekliliğinin sağlanması gerekmektedir. GÖLDOSK, Eğirdir Gölü’nün önemi, su kirliliğinin; su kaynaklarımızın yok olmasına sebep olduğu, insan sağlığını tehdit ettiğini vurgulayıcı, toplumun bilinçlendirilmesi konusundaki faaliyetleri desteklemektedir. Bir STK doğa derneği olarak, doğa yürüyüşleri düzenlemekte ve yürüyüşçüler ile yöre halkının bağ kurmasını sağlamaktadır. Bu sürekli eğitim, böylece yörenin su kaynaklarının korunmasına katkı sağlamaktadır. Anahtar kelimeler: Çevre, halk sağlığı, çevre bilinci, sürdürülebilirlik.
328
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Role of NGOs in Sustainable Environmental Management in the Lakes Region: The Case of GOLDOSK Fikret Yurtaslan1*, Zeynep Korkmaz1, Selçuk Çömlekçi1 GÖLDOSK, Göller Bölgesi Doğa Sporları Kulübü *Responsible author e-mail:
[email protected],
[email protected] 1
Abstract
The creature that constantly interacts with the environment and affects the environment is human. With the growing of industry and technology, sustainable environment and sustainable development concept emerged for solution and management of problems threatening the environment and ecology. Humanity has been constantly changing since its existence. Changing is an indispensable asset. But considering the size, conditions and consequences of change, In order for changes to be made to adversely affect the harmony of the environment, the maintenance and continuity of the sustainable ones must be ensured. GOLDOSK as a Civil Public Community, has supported activities related to the importance of Eğirdir Lake, the water pollution which emphasizing that it threatens human health, community awareness. GÖLDOSK, as an NGO-nature association, nature walkers and hikers provide links to local people. This continuous education contributes to the conservation of water resources in the area Key words: Environment,public health, environmental awareness, sustainability.
329
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Emdirme Yöntemi İle Hazırlanmış CuO-CeO2/Carbon Katalizörlerinin Karakteristik ve CO Oksidasyonu Katalitik Aktivite Özelliklerine Çözücünün Etkisi Filiz BALIKÇI DEREKAYA1,*, Nida ARASAN2 Gazi Üniversitesi, Fen Bilimleri Enstitüsü, İleri Teknolojiler Anabilim Dalı, 06500 Teknikokullar, Ankara, TÜRKİYE 2 Gazi Üniversitesi, Mühendislik Fakültesi, Kimya Mühendisliği Bölümü, Maltepe, Ankara, TÜRKİYE *Sorumlu yazar e-posta:
[email protected]
1
Özet Bu çalışmada emdirme yöntemi ile hazırlanan CuO-CeO2/Karbon katalizörlerinin özelliklerine hazırlama sırasında kullanılan çözücünün etkisi incelenmiştir. Katalizörler karbon destek üzerine (VULCAN XC 72) birlikte-emdirme yöntemi ile çözücü olarak su, etanol ve isopropanol kullanılarak sentezlenmişlerdir. X-ışını difraksiyonu, N2 fizisorpsiyonu ve taramalı elektron mikroskobu analiz teknikleri kullanılarak katalizörlerin karakteristik özellikleri belirlenmiştir. CO oksidasyonu için katalitik aktivite çalışmaları oda sıcaklığı ile 200oC sıcaklıkları arasında gerçekleştirilmiştir. Besleme gazı olarak %1 CO, % 21 O2 ve kalanı He olan gaz karışımı kullanılmıştır. XRD analiz sonuçları katalizör yapısında CuO ve CeO2 kristal fazlarının bulunduğunu göstermiştir. CuO ve CeO2 kristal fazlarından kaynaklanan difraksiyon piklerinin şiddetlerinin karbondan kaynaklanan difraksiyon pikinin şiddetinden çok büyük olduğu belirlenmiştir. İsopropanol kullanılarak hazırlanan katalizör en yüksek yüzey alan sonucunu vermiştir (130,8 m2/g). Katalizörlerin mezogözeneklilik skalası içinde ortalama gözenek çapları olduğu belirlenmiştir. Katalizörler IUPAC sınıflandırması içinde V Tip adsorpsiyon/desorpsiyon izotermi davranışı göstermişlerdir. Anahtar kelimeler: Karbon destek, Katalizörler, Emdirme, Çözücü etkisi.
330
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Influence Of Solvent On The Characteristic Properties And CO Oxidation Catalytic Activities Of CuO-CeO2/Carbon Catalysts Prepared By Impregnation Filiz BALIKÇI DEREKAYA1,*, Nida ARASAN 2 1
Gazi University, Graduate School of Natural And Applied Sciences, Advanced Technologies Department, 06500, Teknikokullar, Ankara, TURKEY 2 Gazi University, Faculty of Engineering, Chemical Engineering Department, Maltepe, Ankara, TURKEY *Responsible author e-mail:
[email protected]
Abstract The effect of the solvent used for the preparation on CuO-CeO2/Carbon catalysts via impregnation on the properties of the catalyst was studied. The catalysts were prepared by the co-impregnation on carbon support (Vulcan XC 72) using water, ethanol and isopropanol as the solvents. The X-Ray diffraction method, N2 phsisorption and scanning electron microscopy studies were used to characterize the catalysts. The CO oxidation catalytic activity studies were carried out between the room temperature and 200oC. The feed composed of 1% CO, % 21 O2 and remain He was used. The CuO, CeO2 and carbon crystal phases were determined from XRD analysis. The intensities of the diffraction peaks which were due to the CuO and CeO2 are greater than the diffraction peak of the carbon support. Catalyst prepared by using the isopropanol solvent has highest surface area (130,8 m2/g). All catalysts have average pore diameter in the mesopore diameter scale. The meso+micro pore volume of the catalyst prepared by using isopropanol is highest. All catalysts show Type V adsorption isotherm of IUPAC classifications which characterize mesoporous adsorbents with weak affinities. Key words:Carbon support, Catalysts, Impregnation, Solvent effect.
331
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
CO Oksidasyonu için Ag2O/SiO2 ve Co3O4/SiO2 Katalizörlerinin Sentez ve Karakterizasyonu Filiz BALIKÇI DEREKAYA1,* Gazi Üniversitesi, Fen Bilimleri Enstitüsü, İleri Teknolojiler Anabilim Dalı, 06500 Teknikokullar, Ankara, TÜRKİYE *Sorumlu yazar e-posta:
[email protected]
1
Özet Değişen kütlesel oranlarda (10/90, 15/85, 20/80) Ag2O/SiO2 ve Co3O4/SiO2 katalizörleri karbon monoksit oksidasyonu reaksiyonunda kullanılmak üzere geleneksel emdirme yöntemi ile sentezlenmişlerdir. Katalizörlerin fiziksel özelliklerine kütlesel orandaki değişmenin etkisini incelemek için hazırlanan katalizörler farklı teknikler kullanılarak karakterize edilmişlerdir. Katalizör yapısında bulunan kristal fazlar x-ışını kırınım deseni analizi ile; yüzey alanı, gözenek hacmi, ortalama gözenek çapı değerleri N 2 fizisorpsiyon analizi ile; yüzey morfolojisi, partiküllerin şekli ve boyutları ile yüzeyde bulunan fazların oranı taramalı elektron mikroskobu (SEM-EDX) analizi ile belirlenmiştir. X-ışını kırınım deseni analiz sonuçları yapıda SiO2, Ag2O ve Co3O4 kristal fazlarının oluştuğunu göstermiştir. N2 fizisorpsiyon analizine göre katalizör yapısında bulunan Ag2O ve Co3O4’ in kütlesel oranı yükseldikçe gözeneklerin tıkanmasına bağlı olarak yüzey alan değerlerinin düştüğü belirlenmiştir. Katalizörlerin ortalama gözenek çaplarının mezogözeneklilik skalası içinde bulunduğu belirlenmiştir. Anahtar kelimeler: Karbon monoksit, Katalizörler, Emdirme.
332
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Synthesis And Characterization of Ag2O/SiO2 and Co3O4/SiO2 Catalysts For CO Oxidation Filiz BALIKÇI DEREKAYA1,* 1
Gazi University, Graduate School of Natural And Applied Sciences, Advanced Technologies Department, 06500, Teknikokullar, Ankara, TURKEY *Responsible author e-mail:
[email protected]
Abstract The Ag2O/SiO2 and Co3O4/SiO2 catalysts which were at different weight ratios (10/90, 15/85, 20/80) were synthesized by using the impregnation method for carbon monoxide oxidation reaction. To investigate the effect of the weight ratio of the components present in the catalysts structures on the characteristic properties of the catalysts all catalyst were characterized by using different characterization techniques. The crystal phases present in the catalyst structures were determined by using X-Ray diffraction; surface areas, average pore diameters, pore volumes and adsorption/desorption isotherms of the catalysts were determined by using N2 physisorption; the surface morphologies, the shapes and sizes of the particles present on the surface of the catalysts were determined by using scanning electron microscopy (SEM-EDX). The diffraction peaks due to the SiO2, Ag2O and Co3O4 phases were observed from the X-Ray diffraction analysis. According to the N2 physisorption results the surface areas of the catalysts were reduced by increase in the weight ratios of Ag2O and Co3O4 in catalysts structures because of the pore blockage of the SiO2 support. All catalysts gave average pore diameter in mesopore diameter scale. Key words: Carbon monoxide, Catalysts, Impregnation.
333
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Endüstri Bitkilerinde Robotik Sıra Üzeri Yabancı Ot Mücadelesinin İncelenmesi Fırat PALA1,* Siirt Üniversitesi Ziraat Fakültesi Bitki Koruma Bölümü, Siirt, Türkiye *Sorumlu yazar e-posta:
[email protected]
1
Özet Tarımda yabancı ot mücadelesinde kolay uygulanabilir olduğu için en yaygın kullanılan yöntem kimyasal mücadeledir. Ancak son yıllarda herbisit kullanımı ile ilgili üründe kalıntı, yabancı otlarda dayanıklılık ve çevre kirliliği ile ilgili sorunlar artmaktadır. Mekanik mücadelede kullanılan kültivatör sadece sıra arasındaki yabancı otlar temizlendiğinden, yaklaşık 14 cm genişliğindeki sıra üzerine hiç dokunulmamaktadır. Elle çapalama ve ayıklama ise aşırı işgücü, zaman ve maliyet gerektirdiğinden pratik değildir. Bu nedenle yabancı ot kontrol riskini azaltacak çevre dostu yeni teknolojilere ihtiyaç vardır. Hassas görüntüleme ve algılama tekniğiyle otomatik sıra üzeri akıllı kültivatör (AK) teknolojisi faydalanılabilir seçeneklerden biridir. Gelişmiş ve pratik olan yeni AK teknolojisi klasik traktör çapalarına göre sıra üzeri otları %60 daha fazla kontrol ettiğinden 2014 yılında Avrupa’da kullanılmaya ve 2016 yılında ABD’de bazı ürünlerde (marul, domates) araştırılmaya başlamıştır. AK’ların robotik sıra üzeri yabancı ot mücadelesi için Türkiye’de test edilmediği bilinmekle birlikle ülkemizde öncelikle sebze ve endüstri bitkilerinde yabancı ot entegre yönetiminde akıllı kültivatör çoğu yabancı otu kontrol edecek düşük maliyetli ve yararlı bir araç olarak hem herbisitlerin eksikliğini giderebilir hem de elle ayıklama işçiliğine bağımlılık problemlerini azaltabilir. Yapılan sürveyde Diyarbakır’ın Bismil ilçesindeki
pamuk ve Silvan ilçesindeki mısır çiftçilerinin yaklaşık üçte ikisinden fazlası bu tür yeni teknolojilere ihtiyaç duyduklarını bildirmiştir. Ankete katılan çiftçilerin yeni tekniklere açık olduğu ve robotik yabancı ot kontrol taktiğinin ilimize getirilmesine, denenmesine ve geliştirilmesine ihtiyaç olduğu sonucuna varılmıştır. Anahtar kelimeler: Sıra üzeri, yabancı ot kontrolü, endüstri bitkisi, robotik kültivatör.
334
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Investigation of an Robotic Intra-Row Weeder for Industrial Crops Firat PALA1,* 1
University of Siirt Faculty of Agriculture Department of Plant Protection, Siirt, Turkey *Responsible author e-mail:
[email protected]
Abstract The most widely used method is chemical control because it is easily applicable in weed management in agriculture. However, in recent years problems related to the use of herbicides have increased in terms of residue in crops, weed resistance and environmental contamination. The cultivator used in the mechanical control is not touched on the intrarow about 14 cm wide since only the weeds between rows are cleaned. Manual hoeing and selecting is impractical because it requires extreme labor, time and cost. For this reason, environmentally friendly new technologies are needed to reduce the risk of weed control. Intelligent cultivator (IC) technology on automatic sequence with precise imaging and detection technique is one of the available options. Advanced and practical, the new IC technology has been used in Europe in 2014 and in some crops (lettuce, tomato) in the US in 2016, as it controls 60% more of the weeds than conventional tractor hoeing. As we know that ICs are not tested in Turkey for weed control on the robotic intra-row, intelligent cultivator in weed management and integrated crop management in vegetable and industrial crops in our country is both a low cost and useful tool to control most weeds and it can eliminate both herbicides and manual hoeing dependency problems. The survey reported that more than two-thirds of the cotton farmers in the Bismil and corn farmers in the Silvan needed such new technologies. It is clear that the farmers participating in the survey are open to new techniques, also testing and development of robotic weed control tactics. Key words: Intra-row, weed control, endüstri bitkisi, robotic cultivator.
335
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürdürülebilir Kalkınma İçin Ekolojik Yapı Tasarım Kriterleri Fulya GÖKŞEN1,*, Cansu GÜNER2, Ahmet KOÇHAN3 Kahramanmaraş Sütçü İmam Üniversitesi, Kahramanmaraş, Türkiye 2 Nevşehir Hacı Bektaş Veli Üniversitesi, Nevşehir, Türkiye 3 Çukurova Üniversitesi, Adana, Türkiye *Sorumlu yazar e-posta:
[email protected]
1
Özet İnsanoğlu, var olduğu günden beri doğası gereği yaşamın devamlılığını amaçlarken, hayatta kalma, beslenme, barınma gibi temel ihtiyaçları için doğayla bir mücadelenin içinde yer almıştır. Uzun bir süre doğal çevreyle uyumlu olan etkileşimlerin, zamanla insanoğlunun ihtiyaçlarının farklılaşması, teknolojinin ilerlemesi, her türlü kaynağın yoğun bir şekilde kullanması çevrenin bozulması sonucunu ortaya çıkartmıştır. Doğal kaynaklar ölçüsüzce tüketilirken, diğer canlılara da zarar verici boyutlara ulaşmıştır. Günümüzde gelinen aşamada, yapay çevreler her türlü yaşamı olumsuz yönde etkileyen çevre sorunlarının kaynağı durumundadır. Endüstri devrimi sonrası büyük bir hızla artan kontrolsüz yapılaşma ve sanayileşme sonucunda doğan enerji ihtiyacı yenilenemeyen fosil enerji kaynaklarının hızla tüketilmesini de beraberinde getirmiştir. Fosil yakıtların kolay elde edilebilirliği ve ekonomik olması bu tür yakıtların kullanım sonrası doğal çevreye verdiği zararların göz ardı edilmesine neden olmuştur. Dünyanın varoluş süresi düşünüldüğünde yüz yıl gibi kısa sayılabilecek bir sürede, kömür, petrol vb. fosil yakıtların tüketiminin artması hava kirliliğine, hatta iklimsel değişikliklere yol açmaya başlamıştır. Giderek artan enerji tüketimi 21.yy yaşam tarzında yeni ve alternatif enerji kaynaklarından yararlanılmasını zorunlu hale getirmiştir. Alternatif enerji kaynaklarının yaratılmasının yanı sıra enerji tüketiminin büyük bölümünü oluşturan yapıların enerji ihtiyacını azaltmak üzere “sürdürülebilir mimarlık, ekolojik mimarlık, yeşil mimarlık, enerji etkin yapı” gibi farklı başlıklarda anılan “enerji duyarlı yapı” yaklaşımı doğmuştur. Yeni yüzyıl ile birlikte, daha sağlıklı bir geleceğe olanak sağlanması amacıyla, sürdürülebilir kalkınma, doğayla uyumlu kentleşme, enerji duyarlı yapılaşma, ekolojik mimarlık kavramları yaygın bir biçimde tartışılmaktadır. Sürdürülebilir kalkınma modelinde enerjinin etkin kullanımı ve doğal çevreyle uyum, mimarlıkta tasarım kararlarını belirleyen en önemli etkenlerin başında gelmektedir. Ekoloji, ekonomi ve kültürel sürdürülebilirlik üçgeni içinde mimarlık mesleği yeniden yorumlanarak, çevreyi kirletmeyen, doğa ve iklimle uyumlu, yenilenebilir enerjilere yönelen ve enerjiyi akılcı kullanan “ekolojik yaklaşımlar” benimsenmektedir. Çalışmada, mimari literatürde yer alan çevre duyarlı, konutlar çoğunlukta olmak üzere farklı bina ve iklim tiplerine sahip ekolojik yapılar üzerinde durulmaktadır. Enerji etkin yapı tasarımı kapsamında etkili olan parametreler belirlenerek, elde edilen veriler sonuç tablosunda bir araya getirilip ekolojik yapı tasarımında belirlenen parametrelerin etki dereceleri incelenmektedir. Sonuçta bu çalışma bir disiplin olarak mimarinin sürdürülebilir kalkınmadaki önemini ortaya koymaya çalışmaktadır. Anahtar kelimeler: Sürdürülebilir kalkınma, sürdürülebilir mimarlık, ekolojik mimarlık, enerji etkin yapı.
336
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Ecological Building Design Criteria for Sustainable Development Fulya GÖKŞEN1,*, Cansu GÜNER2, Ahmet KOÇHAN3 Kahramanmaraş Sütçü İmam University, Kahramanmaraş, Turkey 2 Nevşehir Hacı Bektaş Veli University, Nevşehir, Turkey 3 Çukurova University, Adana, Turkey
1
*Responsible author e-mail:
[email protected]
Abstract Humankind has been involved in a struggle with nature for the basic necessities of survival, nutrition, and marriage, while aiming for the continuity of life, which is inherent in nature. For a long time, the interactions that are compatible with the natural environment, the differentiation of the human needs with time, the progress of the technology, the intensive use of all kinds of sources have resulted in the degradation of the environment. While natural resources are consumed without measure, other living things have reached harmful dimensions. In today's stage, artificial environments are the source of environmental problems that affect every kind of life negatively. The energy need arising as a result of uncontrolled urbanization and industrialization, which has increased at a rapid pace after the industrial revolution, has brought about the rapid depletion of non-renewable fossil energy resources. The easy availability and affordability of fossil fuels has led to the neglect of the damage that such fuels have to the natural environment after use. When considering the world's existence period, coal, oil and so on can be considered as short as a hundred years. Increased consumption of fossil fuels has begun to lead to air pollution, even climate changes. Increasing energy consumption has made it necessary to use new and alternative energy sources in the 21st century lifestyle. In addition to the creation of alternative energy sources, the "energy-sensitive building" approach has been developed in various titles such as "sustainable architecture, ecological architecture, green architecture, energy efficient building" to reduce the energy requirement of building constituting a large part of energy consumption. With the new century, concepts of sustainable development, nature-friendly urbanization, energy-sensitive building and ecological architecture are widely discussed in order to enable a healthier future. Effective use of energy in the sustainable development model and adaptation to the natural environment are among the most important factors determining design decisions in architecture. Ecology, economics and cultural sustainability are reinterpreting the architectural profession within the triangle. "Ecological approaches" are adopted that do not pollute the environment, are compatible with nature and climate, are directed to renewable energies and use energy rationally. The study focuses on ecological constructions with different types of buildings and climate types that are environmentally sensitive in the architectural literature, mostly residences. The parameters that are effective in the energy efficient structure design are determined, and the obtained data are put together in the result table and the impact scores of the parameters determined in the ecological structure design are examined. As a result, 337
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
this study tries to demonstrate the importance of sustainable development in architecture as a discipline. Key words: Sustainable development, sustainable architecture, ecological architecture, energy efficient building.
338
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürdürülebilir Turizm: Kültür Turizmi Ve Kültürel Miras Funda KURAK AÇICI1,*,Şebnem ERTAŞ2,Elif SÖNMEZ3 Karadeniz Teknik Üniversitesi Mimarlık Fakültesi, Trabzon, Türkiye Karadeniz Teknik Üniversitesi Mimarlık Fakültesi, Trabzon, Türkiye 3 Dr. Yüksek İç Mimar *Sorumlu yazar e-posta:
[email protected]
1 2
Özet Ülke ekonomisine ulusal ve uluslararası düzeyde büyük katkı sağlayan turizm, sosyal ve kültürel kalkınma süreçlerinin gelişmesine de yardımcı olan önemli bir sektördür. Turizm faaliyetlerinin, ülkelerin sahip olduğu özgün değerleri kullanma imkanı vermelerinin yanı sıra, istihdam sağlama, eşit gelir dağılımı ve kırsal alanların kalkınmasına da büyük katkısı vardır. Bu kalkınma sürecinde özellikle sürdürülebilirlik kavramı önem kazanmaktadır. Sürdürülebilirlik; bugünün ihtiyaçlarını karşılarken doğal kaynakları korumak ve gelecek nesillere iyi bir çevre bırakmak için yapılan faaliyetlerin bütünüdür. Dolayısıyla turizm ve sürdürülebilirlik birbiri içerisinde etkileşim içindedir. Turizmin kaynağını oluşturan doğal varlıkların yanı sıra geçmişten günümüze kadar toplumların meydana getirdiği çeşitli uygarlık ve sanat harikalarının yeryüzünde oluşumunu ve dağılışını sağlayan etkenler turizm, coğrafya ve kültürü birleştirmektedir. İnsanın yaşam alanı olarak seçtiği yerlerin farklılığı yaşama biçimine, kültürüne doğrudan yansımaktadır. Kültür insanın doğa karşısında doğayla birlikte yaşamını sürdürebilmesi için ürettiği her şeydir. İnsanın içinde yaşadığı doğal çevre; inşaa ettiği binanın yapı malzemesinden, geçim şekline ve giyim tarzına kadar pek çok unsurdan etkilenmektedir. Doğal çevrenin farklılığı kültüre yansımakta, kültür hem doğal çevreyi hem de toplumu etkilemektedir. Günümüzde insanlar eski medeniyetlerin ya da kültürlerin izlerini görmenin yanı sıra kendi kültürleri dışındaki yerel kültürlere de ilgi duymaya başlamışlardır. Doğa koşullarına bağlı kalmadan turizmi tüm yıla yaymak, turizme bir dinamizm kazandırmak, ülke kültürünü yerli ve yabancılara tanıtmak, korumak, geçmişe ve geleceğe sahip çıkmak için kültürel turizmin geliştirilmesi önemli bir avantaj sağlamaktadır. Doğal ve kültürel miras, tarih öncesi ve tarihi devirlere ait bilim, kültür, din ve güzel sanatlarla ilgili bulunan yerüstü, yeraltı veya su altındaki tüm taşınır taşınmaz varlıklar olarak tanımlanmaktadır. Turistlerin kültürel mirasa ilgileri sonucu gelişen kültürel turizm tarihsel yerlerin, müzelerin, kalıntıların, fuar ve festivallerin ziyaret edilmesi ile gelişmeye başlamıştır. Kültürel turizmin ürünleri geçmişe ve günümüze ilişkin olarak farklılaşmaktadır. Geçmiş medeniyetlere ilişkin kalıntılarla birlikte, yaşam biçimleri, gelenek, görenekler, festivaller, müzik ve eğlence türleri, el sanatları, yemek türleri ve alışkanlıkları kültürel turizmin en önemli ürünleri arasında küreselleşen dünyada giderek önem kazanmaktadır. Sürdürülebilir turizm ihtiyacını ortaya çıkaran temel düşünce, turizmin kaynağını oluşturan çevresel ve kültürel değerlerin uzun dönemde bozulmadan ya da ortaya çıkabilecek olumsuz etkileri en aza indirecek şekilde kullanılmasını sağlamaktır. Bu noktada kültür mirası kaynakları veya değerleri ile turizm arasındaki ilişki dinamiktir ve sürdürülebilir olmalıdır. 339
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürdürebilir kültür turizmini ifade eden araçlardan biri de “mimari”dir. Önemli bir kültür kaynağı olan mimarinin sürdürülebilirliği, koruma ve restorasyon çalışmalarının yapılması ile mümkündür. Dünya kültür mirasının çok önemli bir bölümüne sahip olan ülkemizde, kültür mirasının koruma-kullanma-yaşatma ilkeleri doğrultusunda sürdürülebilirliğini sağlamak için bir takım çalışmalar yapılmaya başlanmıştır. Bu çalışmada, Türkiye genelinde, sürdürülebilirlik, sürdürülebilir turizm ve içerisinde barınan kültürel turizm, kültürel miras kavramsal olarak tartışmaya açılacaktır. Ülke genelinde kültürel turizm ve kültürel mirasın sürdürülebilir gelişimi irdelenecektir. Anahtar kelimeler: Sürdürülebilir Turizm, Kültür Turizmi, Kültürel Miras.
340
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sustaınable Tourısm: Culture Tourısm And Cultural Herıtage Funda KURAK AÇICI1,*,Şebnem ERTAŞ2,Elif SÖNMEZ3 1 2
Karadeniz Technical University Architectural Faculty, Trabzon, Turkey Karadeniz Technical University Architectural Faculty, Trabzon, Turkey 3 Phd. Interior Architecture *Responsible author e-mail:
[email protected]
Abstract Tourism, which contributes to the economy of the country at national and international level, is an important sector which also facilitates the progress of social and cultural development processes. Apart from providing opportunities for using the unique values of countries, tourism activities make great contribution to providing employment, equal distribution of income and the development of rural areas. In this process of development, especially the concept of sustainability gains importance. Sustainability is the sum of all activities carried out in order to leave the future generations a good environment and protect the natural resources while meeting the needs of today. Hence, tourism and sustainability are in a reciprocal relationship. Along with the natural resources which create the source of tourism, the factors causing the creation and distribution of various wonders of civilization and art produced by societies from the past to present, unite tourism, geography and culture. The diversity of the places chosen by people as living areas, are reflected directly to the life style and culture. Culture is everything human beings create in order to sustain their life against nature and together with nature. The natural environment in which people live is affected by many factors ranging from the building materials they use, the way they make a living and to the style of clothing. The diversity of the natural environment is reflected into the culture, the culture affects both the natural environment and the society. Today, apart from seeing the traces of the old civilizations and cultures, people have also become interested in local cultures other than their own culture. The development of cultural tourism provides an important advantage to distribute tourism all through the year without being tied to the natural conditions, to bring dynamism to tourism, to introduce the culture of the country to locals and foreigners, to protect, to look out for the past and the future. The natural and cultural heritage is defined as all moveable or immoveable properties related to science, culture, religion and fine arts above ground, underground or underwater belonging to prehistoric or historic periods. Culture tourism, which developed as a result of the interest of tourists in cultural heritage, has started with visits to historical sites, museums, ruins, fairs and festivals. The products of cultural tourism diversify in relation to the past and the present. With the remains of the old civilizations, life styles, traditions, customs, festivals, music and entertainment styles, handcrafts, cuisine and habits gain an increasing importance as the most important products of culture tourism in the globalizing world. The fundamental idea producing the need for sustainable tourism is providing the use of environmental and cultural values creating the source of tourism in a way that they are not deteriorated or the negative effects that could emerge are minimized in the long term. 341
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
In this respect, the relationship between the sources of cultural heritage or values and tourism is dynamic and should be sustainable. One of the tools which defines sustainable cultural tourism is “architecture”. The sustainability of architecture which is an important culture resource is possible through carrying out protection and restoration activities. In our country which possesses an important part of the world cultural heritage, various studies have been started in order to provide sustainability of cultural heritage in accordance with protection-use-sustain principles. In this study, countrywide in Turkey, sustainability, sustainable tourism and cultural tourism as its component and cultural heritage is going to be put under discussion conceptually. Cultural tourism and the sustainable development of the cultural heritage is going to be scrutinized countrywide. Key words: Sustainable Tourism, Culture Tourism, Cultural Heritage.
342
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Trabzon/Ortahisar Fatih Büyük Camii’nin Bölgedeki Turizm Bağlamında Yarattığı Sürdürülebilir Gelişim Funda KURAK AÇICI1,*, Olcay KÖSE2 Karadeniz Teknik Üniversitesi Mimarlık Fakültesi, Trabzon, Türkiye Karadeniz Teknik Üniversitesi Mimarlık Fakültesi, Trabzon, Türkiye *Sorumlu yazar e-posta:
[email protected]
1 2
Özet Sürdürülebilir turizm, mevcut turistlerin ve ev sahibi toplumların istek ve beklentilerini karşılayan, ekonomik, sosyal, estetik talepleri öngören, kültürel bütünlüğün, zorunlu ekolojik süreçlerin, biyolojik çeşitliliğin ve yaşam destek sistemlerinin devamlılığının sağlandığı bir planlama sürecidir. Farklı çevrelerde farklı kültürlerin ortaya çıkması, kültürleri tanıma isteğini gündeme getirmiş, bu durum eğlenme-dinlenme talebi ile birlikte turizmin gelişmesine, coğrafya-kültür ve turizm arasındaki ilişkinin güçlenmesine neden olmuştur. XX. yüzyılının en hızlı gelişen endüstrilerinden biri hiç şüphe yok ki turizmdir. Turizmin bu denli hızlı gelişmesi, kendi içinde çeşitlenmeye ve kültür turizmi olarak adlandırdığımız turizmin doğmasına neden olmuştur. Genelde kültürel değerler üzerine kurulmuş bir turizm çeşidi olarak ifade edebileceğimiz kültür turizmi, birçok değişkeni bünyesinde barındırmaktadır. Bu değişkenler, bölgesel veya ulusal boyutta farklılık yaratmakta ve ortaya çıkan bu farklılık günümüzde turizm hareketlerini şekillendirmektedir. Doğu Karadeniz Bölgesi sürdürülebilir turizm yaklaşımına göre doğası kadar, kendine özgü mimarisi ile de farklı bir kültürel zenginlik barındırmaktadır. Kültürel turizmin sürekliliğinin sağlanması, doğası kadar mimarinin de korunması ve yaşatılması ile mümkün olmaktadır. Turizm düşüncesi olarak sürdürülebilirlik, turizm aktivitesinin yapıldığı fiziksel çevreyi ve orada yaşayan halkın sosyal yapısını koruyan ve ekonomik açıdan verimlilik sağlayan bir olgudur. Çalışma kapsamında; Doğu Karadeniz Bölgesinin alternatif turizm faaliyetleri, tarihi çevresi ve Ortahisar mahallesinde yeni kültür merkezinin batısında yer alan Bizans döneminin Trabzon’daki en önemli dini yapısı olan Chrisokephalos Kilisesi, bugünkü adı ile Ortahisar Fatih Büyük Camii ele alınacaktır. Bugün Trabzon’da Osmanlı sanatının en iyi süsleme örneklerinin yansıtıldığı camii olarak bilinen Ortahisar Fatih Büyük Camii’nin bölgedeki turizm bağlamında yarattığı sürdürülebilir gelişimi irdelenecektir. Anahtar kelimeler: Sürdürülebilir Turizm, Kültür Turizmi, Trabzon, Ortahisar Fatih Büyük Camii.
343
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sustainable Development Created By The Trabzon/Ortahisar Fatih Great Mosque In The Scope Of Tourism In The Area Funda KURAK AÇICI1,*, Olcay KÖSE 2 1 2
Karadeniz Technical University Architectural Faculty, Trabzon, Turkey Karadeniz Technical University Architectural Faculty, Trabzon, Turkey *Responsible author e-mail:
[email protected]
Abstract Sustainable tourism is a planning process which meets the needs and expectations of existing tourists and hosting societies, foresees economic, social and aesthetic demands, facilitates the continuity of cultural integrity, obligatory ecological processes, biological diversity and life support systems. The emergence of different cultures in different environments has brought about the desire for knowing cultures, and this has led to the development of tourism together with the demand for recreation-relaxation and caused the strengthening of the relationship between geography-culture and tourism. There is no doubt that one of the fastest growing industries of the XXth century is tourism. This fast pace at which tourism develops has caused tourism to diversify within itself and the emergence of the type of tourism called culture tourism. Culture tourism which can be generally defined as a kind of tourism based on cultural values, accommodates many variables. These variables create a difference at the regional or national level and this difference shapes the tourism activities. Eastern Blacksea Region hosts a different cultural richness with its nature as well as its unique architecture in terms of the sustainable tourism approach. The sustainability of cultural tourism is made possible through protecting and sustaining not only nature but the architecture. As an idea of tourism, sustainability is a phenomenon which provides productivity in terms of economy and protects the physical environment where the tourism activity is done and the social structure of the people living there. In the scope of the study; alternative tourism activities at Eastern Blacksea region, its historical environment and the Chrisokephalos Church known today as the Ortahisar Fatih Great Mosque which is the most important religious building of the Byzantine period in Trabzon, located in Ortahisar district to the west of the new cultural center, is going to be dealt with. The Ortahisar Great Mosque, which is known as the mosque where the best examples of the Ottoman ornamentation art is reflected in Trabzon currently, is going to be examined in terms of the sustainable tourism it creates in the tourism of the region. Key words: Sustainable Tourism, Culture Tourism, Trabzon, Ortahisar Fatih Great Mosque.
344
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Fenomenolojik Açıdan; Korku ve Kaygıların İletişim ve Kişisel Gelişim Üzerindeki Yansımaları Gizem IDIR1,* Akdeniz Üniversitesi, Antalya, Türkiye Sorumlu yazar e-posta:
[email protected] 1
*
Özet (Ben kimim?), (Ne yapmalıyım?), (Neden yapmalıyım?) gibi sorular, bireyin kimlik oluşumunda etkili olmaktadır. Batı düşünce tarihinde öteki insanların fikir ayrımları arasında kalan insan, kimlik karmaşası yaşamaktadır. Bu durum bireyin bilinci ile değer yargılarını olumsuz yönde etkilemektedir. Düşüncelerini istediği gibi ifade edemeyen kişi, bu sefer sessizdir ve fikirlerini geri plana atmaktadır. Bu süreç uzadıkça bireyde çeşitli ruhsal bozuklukları ortaya çıkmaktadır. İnsanın diğer insanlarla iletişim kurabilmesi için, ruhuna da ihtiyacı vardır. Ruhtan gelen hisler yansımadan sadece akıl ile iletişim kurulamaz. Dilini kullanamayan insan, kendi kabuğunda kaybolup gider. Dilini kullanan insan ise ilim, felsefe, edebiyat gibi alanlarda kendini geliştirir. Başarılı oldukça da kendi yaşam dünyasında, kendisini mutlu ve umutlu hisseder. İnsan dilini kullanamasaydı, insanlar arasında nasıl bir iletişim, aktarım, kültürleşme, sosyalleşme, paylaşım gibi değerler olabilecekti? Bizler bir sanat eserine baktığımız zaman, o sanatçının kişiliği hakkında konuşabiliyoruz, bir filozofun yöntemini incelediğimiz zaman da o filozofun felsefesi ve bilgisi hakkında görüşlere sahip olabiliyoruz. İşte dil aracılığıyla da insanın duygu ve düşüncesini öğrenmekteyizdir. İnsanların her ne kadar farklı beklentileri olsa da ortak noktada buluştuğu şeyler de mevcuttur. Bunlardan birisi, insanın kendisini geliştirmek istemesidir. Bu gelişimde insana en yakın dost kendi kişiliği olacaktır. Böylelikle kişisel gelişimi, psikolojisini de motive eden yönde şekil alacaktır. İnsanlar, gayelerle yüklü, hayati ve değerli varlıklardır. Faydalı bir felsefenin, insanla ve hayatla gerçek bağlantılar kurması gerekir. Fenomenoloji, insanın içinde yaşadığı dünyayı anlamayı ve anlamlandırmayı amaçlamaktadır. Bireyin, şu anda ne olduğuna öznel görüşle bakmaktadır. Hayatta hepimizin değişkenliğe sahip şüpheleri ve korkuları vardır. Bu korkuların derecesi, bizim duygularımız ve irademizin eksikliğinden kaynaklanmaktadır. Yaşamımızda ve sorunlarımızda, kendimizi sürekli bir seçim karmaşası içerisinde tercih yaparken bulmaktayızdır. Kendimizden her yönden yararlanabilmek için kaybeden olarak değil, bir kazanan olarak hareket etmemiz gerekmektedir. Kaygı içinde olan insan kendisini adeta bir hiç kimse olarak görmektedir. Bizler, “kendini gösteren görünüşlerin, görünüşü gösteren olanaklarını anlamaya çalışıyoruz”. Basit gibi görünen ardında, yorumlanması gereken birçok giz vardır aslında. Bizler, bu konuda düşündükçe sürekli kaygı üretmiş olmaktayız. Çünkü kaygının özünü oluşturan belirgin özellikler, “nedenlerin belirsizliği ve yokluğundan” gelmektedir. Bu kaygı hali, tehlikeyle orantısız hatta, düşsel tehlikelere karşı gösterilen bir tepki biçiminde açığa çıkabilmektedir. Kaygılarımız, kaygı duymayacağımız (ehli) şeylere dönüştürülüyor. “Korkularımızın ne kadarı doğuştan gelmektedir?” Bu belirsizlikler içerisinde, algılarımız ön planda olmaktadır. “Her ne kadar algı, yanıltıcı olsa da gene de biz görünenle sınırlıyız. Sınırların ötesindeki bilinmezlik (görülmeyenler), hayalet ve sır gibi gelmektedir.” Doğru seçimi yapmamız gerekmektedir. Hiçbir seçimi yapmadığımız sürece, her şeyi mümkün kılmış oluruz. Birçok fikir üretebiliyoruz fakat iki dakika sonra neler olacağını bilemiyoruz. Hiçbir zaman aynı değildir, her zaman farklıdır ve anı (önce-sonra) 345
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
yani (gelecek-geçmiş) olarak deneyimleyebiliriz. İnsan geleceğe doğrudur. Varlıkta kalmak kendi içinde olur, bütün kontrol sendedir. Fenomenoloji, var olanların varlığının bilimidir yani ontolojidir. Fenomenoloji, bizde nasıl bir kaygının uyandırıldığını tartışan disiplindir. Aralarda açıklık ya da geçişlilik istenildiğinde, zamana bakılmalıdır. Anahtar kelimeler: Fenomenoloji, Korku, Kaygı, İletişim, Kişisel Gelişim.
346
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
From Phenomenological Angle; Reflections of Fear and Anxiety on Communication and Personal Development Gizem IDIR1,* Akdeniz Üniversitesi, Antalya, Türkiye Responsible author e-mail:
[email protected] 1
*
Abstract (Who I am?), (What should I do?), (Why should I do it?) questions like are influential in the identity formation of the individual. In the history of Western thought, people who are among the opinions of other people, are living identity confusion. This situation affects the individual's consciousness and value judgments negatively. The individual who can not express his / her thoughts as he / she wants, this time is silent and throws his ideas into the back plan. As long as this process is prolonged, various mental disorders occur in the individual. In order for people to communicate with other people, they also need spirit. It is not possible to communicate with the mind alone, before the feelings of the spirit are reflected. A person who can not use the language will be losting in his own shell. The person who uses the language develops himself in fields such as science, philosophy, literature. When he is successful, he feels happy and hopeful. If human language can not be used, what kind of communication, transfer, cultivation, socialization, sharing between people can be? When we look at a work of art, we can talk about the personality of that artist, and when we examine the method of a philosopher, we can have opinions about that philosopher's philosophy and knowledge. Here we learn the emotions and thoughts of people through language. People have different expectations, but there are things they have in common. One of them is that the person does not want to improve himself. In this development, the closest friend to man will be his own personality. In this way, personal development will take shape in the direction of motivating psychology. People are vital, vital and valuable assets. A useful philosophy needs to establish real connections with people and life. Phenomenology aims to understand and make sense of the world in which humans live. The individual is looking at what is now, subjective opinion. Phenomenology aims to understand and make sense of the world in which humans live. What the be individual is now, With a subjective view looking at. In life, we all have suspicions and fears that are variable. The level of these fears is due to lack of emotion and lack of wills. In our lives and in our problems, we find ourselves constantly in the confusion of choice, making choices. We need to act as a winner not a loss, in order to benefit from ourselves in every way. A worried person he sees himself as "anobody". We, "the manifested appearances, showing the appearance of trying to understand the possibilities." Behind what seems simple is the fact that there are many secrets to be interpreted. When we think about this issue, we are constantly producing anxiety. Because the salient features of which are the essence of anxiety, "causing uncertainty and the absence of" come. This state of anxiety can turn out, to be disproportionate to danger even in the form of a reaction to imaginary danger. Our worries are transformed into things that we will not worry about. "There are our fears at how much innate come from?" In this uncertainty, our perception is in the foreground. "Although perception is misleading, we are still bound to what we see. The unknowns beyond the boundaries are like ghosts and secrets." We need to make the right choice. As long as make no choice, we have made everything possible. We can produce many ideas, but we do not know what will happen 347
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
after two minutes. It is always different and we can experience the moment (before-after) ie (future-past). Human, "future" is true. Staying in existence is in itself, all control is in you. Phenomenology is the science of the existence of existing ones, that is, ontology. Phenomenology, discuss what discipline is how uyandırdırıl concern. When clearance or transitivity is desired in beetween openness, time must be checked. Key words: Phenomenology, Fear, Anxiety, Communication, Personal Development.
348
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Homeros ve Hesiodos'ta İnsanın Bireyselleşme Çabası Gizem KILIÇ1,* Akdeniz Üniversitesi, Edebiyat Fakültesi, Felsefe Bölümü Antalya, Türkiye *Sorumlu yazar e-posta:
[email protected]
1
Özet Eski Yunan felsefesinin temeli insanı akıl sahibi bir varlık olarak belirlemesinde yatar. Bu düşünce Yunan felsefesinde doğmuştur ve başlangıcı Aristoteles'in ifadesiyle söylersek ," İnsanın hayret etmesinde ve sorunu fark ettiği anda kendi bilgisizliğini, yani cahilliğini kabullenmesinde" aramalıdır. Yunan mitolojisine dayanan bu düşünce Homeros ve Hesiodos'un destanlarında önemli bir etkisini görmekteyiz. Bu destanlarda insanlar her ne kadar doğayı tanrıların çevrelediğini düşünse de kendi kararlarını vermek isteyen, başka bir deyişle bireyselleşme çabası içine girdiği inkâr edilemez. Homeros destanlarında, kahramanın zaman zaman iç çatışkısını çözümlemek için hiçbir tanrıya hitap etmeden kendi thymosuyla (gönül) başbaşa kalıp yaptığı konuşmalar, Yunan'a özgü düşünme biçiminin ilk halini yansıtması açısından dikkate alınması gereken bir durumdur. Söz konusu bu durum Homerosçu düşünme tarzı ile Yunan felsefesinin ahlak düşünüşü arasındaki ilişkiyi gözler önüne sermesi açısından da önemlidir. İnsanların vicdanıyla kendi fikirlerini söyleyebilmelerinde, dolayısıyla gerektiğinde hem tanrıya hem de topluma karşı bir tavır sergileyebilmelerinde yatar. Topluma karşı yapılan bu tavır bu kez tanrıların kurduğuna inanılan sosyal birlikteliğe, daha geniş bir ifadeyle söyleyecek olursak tanrının yazdığı yazgıya da bir anlamda da karşı çıkış söz konusudur. Toplumun insana yüklediği doğruluk ile kendi doğrusu arasındaki ürkütücü uzaklık bilinmektedir. Bu çalışmamda "toplumun doğrusu ile insanın kendi doğrusu arasında yaşanan çatışkı","birey olmaya doğru yükselişin kıvılcımlarını" nasıl açığa vurduğunu ele alacağım. Anahtar kelimeler: Homeros, Hesiodos, Bireyselleşme, Yunan Felsefesi.
349
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Human Individualization Effort in Homeros and Hesiodos Gizem KILIÇ1,* Akdeniz Üniversitesi, Edebiyat Fakültesi, Felsefe Bölümü Antalya, Türkiye *Responsible author e-mail:
[email protected]
1
Abstract The ancient Greek philosophy lies in determining the foundational human being as an intelligent being. This thought was born on the Greek philosophy and should be called in the expression of Aristotle as the beginning, "In the astonishment of man and in the awareness of the problem, he should seek his own ignorance, accepting his ignorance". This idea, based on Greek mythology, has an important effect on the legends of Homer and Hesiod. In these epics people can not deny that although they think nature is surrounded by the gods, they are trying to make their own decisions, in other words, into the struggle for individualization. In the Homeric epics, when the hero sometimes speaks with his thymos in order to resolve the internal conflict, he or she speaks with no god, and this is a situation that needs to be considered in terms of reflecting the first form of Greek thought. In other words, it is also important to note the relationship between the way of thinking of the Homericist and the moral thinking of Greek philosophy. In their ability to express their own ideas with their conscience, and therefore when necessary, they can demonstrate an attitude towards both God and society. This attitude towards collectiveism is a contradiction in the meaning of the social cohesion believed by the gods this time, and in the sense that the god written by the god would say it in a broader sense. The frightening distance between the truth that society imposes on man and his own line is known. In this work, I will examine how you have opened the "conflict between society and the line of man" and "the spark of the ascension to become an individual". Key words: Homeros, Hesiodos, İndividualization, Greek Philosophy.
350
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürdürülebilir Kültürel Miras Yönetimi Gizem ÖKSÜZ KUŞÇUOĞLU1,*, Murat TAŞ2
1
Uludağ Üniversitesi Fen Bilimleri Enstitüsü Mimarlık Anabilim Dalı Yüksek Lisans Öğrencisi, Bursa, Türkiye Uludağ Üniversitesi Mimarlık Fakültesi Öğretim Üyesi, Bursa, Türkiye
2
*Sorumlu yazar e-posta:
[email protected]
Özet Kültürel Miras aynı toplumdaki insanların ortak geçmişlerini anlatan, tarihi birikimlerini ortaya koyan, soyut ve somut olmak üzere sadece üzerinde bulunduğu toplum ve gelecek kuşaklar için değil tüm insanlık için anlam ifade eden zenginliktir. Kültürel miras değerleri bulunduğu bölgelerde, kültürel ve sosyal gelişim, fiziksel çevresinde gelişim ve ekonomik bir gelir kaynağı olarak fırsat olarak görülebilir ve değerlendirebilir. Kültürel mirası korumak ve yaşatmak kültürel miras yönetimi konusunda temel hedef olmasına rağmen korumayla beraber ekonomik ve sosyal gelişimin de sağlanması, toplumun kültürel kimlik değerleri gözünde bulundurularak toplumsal beklentilerinin gelecek kuşak ve insanlık için ön plana çıkarılması, koruma kavramında sürdürülebilirlik kavramını ortaya çıkarmıştır. Sürdürülebilir Kültürel Miras Yönetimi, kültürel miras, toplum ve çevre arasındaki ilişkinin uzun süreli ve sadece günümüz toplumu için değil gelecek kuşak için de yaşamasının sağlanabilmesi bakımından önemlidir. Sürdürülebilir kültürel miras yönetiminde, miras değerlerinin neden korunması gerektiği konusunda toplumsal bilinç oluşturulmalı ve bu bilinç artırılmalıdır. Bu konudaki önemli konulardan biri korumada katılımcı yaklaşımlardır. Sürdürülebilir yönetimde katılımcı yaklaşım ile korumanın amacı, değeri toplumdan soyutlamak değil değeri topluma kazandırıp kültürel ve sosyal yaşamda yer edinmesini, ekonomik ve sosyal gelişmede kültürel miras değerinin katkıda bulunmasını sağlamaktır. Katılımcı yaklaşımlarda kültürel miras değerlerinde kullanım, kültürel ve sosyal açıdan sürdürülebilir olmalıdır, miras değerinin bütünlüğünü olumsuz yönde etkilememeli ve ekonomik kaygılarla kullanım söz konusu olduğunda tahribatın önüne geçilebilmelidir. Bu çalışmanın temel amacı; kültürel miras alanlarında, koruma ve yaşatmaya yönelik güncel ve evrensel yaklaşımları sürdürülebilir yönetim bağlamında ele alarak, sürdürülebilir kültürel miras yönetimi konusunun incelenmesidir. Çalışmada öncelikle kültürel miras koruma/yaşatma, sürdürülebilir koruma yönetimi konularında ulusal ve uluslararası yayınlar incelenmiş ve sürdürülebilir kültürel miras yönetimi konusunda katılımcı yaklaşımların uygulanabilirliğinin belirlenmesi hedeflenmiştir. Anahtar kelimeler: Kültürel miras, kültürel miras yönetimi, sürdürülebilir yönetim.
351
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sustainable Cultural Heritage Management Gizem ÖKSÜZ KUŞÇUOĞLU1,*, Murat TAŞ2 1
Uludag University Graduate School of Natural and Applied Sciences Department of Architecture Graduate Student, Bursa, Turkey 2 Uludag University Faculty of Architecture Professor, Bursa, Turkey *Responsible author e-mail:
[email protected]
Abstract Cultural Heritage is the richness that tells about the common past of people in the same society, reveals their historical accumulations abstract and tangible, meaning not only for the people living in that region and for future generations, but also for all humanity. In areas where cultural heritage values exist, cultural and social development can be seen and evaluated as an opportunity for development as an economic source of income and physical environment. Protecting and utilization cultural heritage is the main objective of cultural heritage management, but it also reveals the concept of sustainability in the concept of protection, ensuring economic and social development together with protection, bringing social expectations to the forefront of future generations and humanity by considering cultural values of society. Sustainable Cultural Heritage Management is important in that the relationship of cultural heritage to society and the environment is long-lasting and that it can exist not only for today's society but also for future generations. In sustainable cultural heritage management, social awareness should be established about why conservation of heritage values is necessary and this social awareness should be increased. One of the key issues in this regard is participatory approaches to protection. The participatory approach in sustainable management aims to ensure that not to abstract the value from the society but to make it a valuable gathering place in cultural and social life and to contribute cultural heritage value in economic and social development. In participatory approaches, the use of cultural heritage values must be culturally and socially sustainable, the integrity of cultural heritage value not adversely affected, and the destruction should be avoided in the case of economic concerns. The main purpose of this study is; Is to examine the issue of sustainable cultural heritage management by addressing current and universal approaches to conservation and utilization in the cultural heritage areas in the context of sustainable management. The study first examined national and international publications on cultural heritage conservation/utilization, sustainable protection management and aimed to determine the feasibility of participatory approaches to sustainable cultural heritage management. Key words: Cultural heritage, cultural heritage management, sustainable management.
352
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürdürülebilirlik Bağlamında; Geleneksel Mimaride İklimle Uyumlu Yapılar: Elazığ-Harput Evleri Üzerinde İnceleme Gonca ÖZER1,*, Murat ORAL2 Selçuk Üniversitesi, Konya, Türkiye Selçuk Üniversitesi, Konya, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2
Özet Günümüzün en büyük problerinden biri enerjidir. Binalar gerek yapım gerek yaşam sürecinde enerji kaynaklarının kullanımı açısından büyük bir yere sahiptir. Bu sebeple çevresel sürdürülebilirliğin sağlanması için binaların enerji tasarrufunu göz önünde bulundurularak tasarlanması gerekmektedir. Binaların enerji tasarrufunda etkili olan birçok tasarım parametresi düşünülebilir. Bu parametrelerden birkaçı; mekan organizasyonu, bina kabuk özellikleri, binalar arasındaki mesafe gibi tanımlanabilir. Günümüzde bu parametreler, en az yapay sistem gerektiren binalar tasarlamak için ön planda tutulması gereken kriterlerdir. Yukarıda belirtilenler göz önüne alındığında; iklimle uyumlu, sürdürülbilir tasarım stratejilerinin geçmişten günümüze Anadoludaki geleneksel mimari tasarımlarda uygulandığı söylenebilir. Birçok uygarlığın izlerini taşıyan Elazığ kentinde, özellikle Harput ve çevresinde 19. Yüzyılın başlarına kadar pekçok sivil mimari yapılar inşa edilmiştir. Bu çalışmanın temel amacı, geleneksel Türk evinin çevreye duyarlı, iklimle uyumlu konut yaklaşımına katkısı açısından değerlendirilmesidir. Geleneksel mimari dokulardan elde edilen değer ve yaklaşımların çağdaş mimari tasarım ve üretime katkıları tartışılacaktır. Geleneksel konut mimarisinde var olan olumlu veri bilgi ve çıkarımlar çağdaş konut mimarisi ile karşılaştırılacak ve uygulanabilecek bir metedoloji ortaya konacaktır. Anahtar kelimeler: Geleneksel Mimari, iklimle uyumlu binalar, Elazığ-Harput evleri, sürdürülebilir mimarlık.
353
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
In The Context Of Sustainability; Compatible With Climate Buildings İn Traditional Architecture: An Examination About Elazığ-Harput Houses Gonca ÖZER1,*, Murat ORAL2 1
Selcuk University, Konya, Turkey Selcuk University, Konya, Turkey *Responsible author e-mail:
[email protected] 2
Abstract One of today's biggest probes is energy. The buildings have a great deal in terms of the use of energy resources both in construction and in life. For this reason, in order to ensure environmental sustainability, buildings must be designed with energy savings in mind. Many design parameters that are effective in energy saving of buildings can be considered. Some of these parameters; Space organization, building shell characteristics, distance between buildings. Nowadays, these parameters are the criteria that must be kept on the front panel in order to design the buildings which require at least the artificial system. In view of the above, It can be said that climate-conscious, sustainable design strategies have been applied from the past to the present day in traditional architectural designs in Anatolia. In the city of Elazig, which has traces of many civilizations, many civil architectural constructions have been constructed especially around Harput and its surroundings until the beginning of the 19th century. The main purpose of this study is to evaluate the traditional Turkish house in terms of contribution to the environmentally sensitive, climate-friendly housing approach. Contemporary architectural design and production contributions to values and approaches derived from traditional architectural texts will be discussed. The positive data information and inferences existing in traditional residential architecture will be compared with contemporary residential architecture and a methodology to be implemented will be put forth. Key words: Traditional Architecture, Buildings Compatible with Climate, Elazığ-Harput Houses, Sustainable architecture.
354
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürdürülebilir Deniz Turizminde Çekici Bir Potansiyel: Sualtı Batık Turizmi Gökhan AK1,* Nişantaşı Üniversitesi, İstanbul, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
Özet Temiz denizlere sahip ülkeler, aynı zamanda sürdürülebilir deniz turizmi olanaklarına da sahiptir. Bunlar arasında, serbest dalış ve sportif amaçla yapılacak aletli dalışlarla ilgili su altı parkur alanlarındaki çeşitli dalış aktiviteleri sayılabilir. Nitekim Türkiye’nin özellikle Ege ve Akdeniz kıyıları, sahip oldukları eşsiz dalış noktaları ve sualtı zenginlikleri ile her yıl binlerce dalış meraklısını çekmektedir. Ancak ülkeler, sualtı turizminin sağlıklı sürdürülebilirliği maksadıyla, bu alanda olumlu yeniliklerin de çeşitliliğini öngörmektedirler. Bu bağlamda, son yıllarda sürdürülebilir sualtı turizminde yeni ve çekici bir alan yaratılmıştır. Bu da, sualtı batık turizmidir. Ülkeler, dalış merkezlerini sualtı batıkları ve yapay resifler yoluyla cazip hale getirerek, sürdürülebilir turizm potansiyellerine ivme kazandırmayı amaçlamaktadırlar. Bu çerçevede, Türkiye’nin de batı ve güney kıyıları, yapay resifler, gemi ve uçak batıklarıyla bölgenin en popüler dalış merkezleri arasında yer almaya başlamıştır. Bu araştırmanın ana amacı, hem yeni hem de ilgi çekici bir yapıya sahip olmalarından hareketle, dalışa uygun sualtı alanlarında özel şartlarla batırılmış batıkların veya oluşturulmuş yapay resiflerin sürdürülebilir deniz turizmine olan katkı ve değerlerini irdelemektir. Böylelikle sürdürülebilir deniz turizmde ürün sunumunun farklılaştırılması bağlamında, çekici bir turistik yenilik olarak sualtı batık ve yapay resif alanları bu çalışmanın esas kapsamı içerisindedir. Bu araştırma kapsamında, sualtı batık turizminin sürdürülebilir deniz turizmi açısından ne denli cazip bir turizm ürünü oluşturabileceği; bu yeni ve cazip potansiyelin sürdürülebilir deniz turizmini ne ölçüde canlandırabileceği ve bu çekici turizm yeniliğinin, bölge ve turizm hareketleri açısından tanıtım olanakları ile önem ve etki boyutları ortaya konulmaya çalışılmış ve bu çerçevede öneriler getirilmiştir. Anahtar kelimeler: Sürdürülebilir Turizm, Deniz Turizmi, Yeniliklerin Çeşitliliği, Sualtı Batık Turizmi.
355
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
An Attractive Potential in Sustainable Aquamarine Tourism: Wreck Tourism Gökhan AK1,* Nişantaşı University, İstanbul, Turkey * Responsible author e-mail:
[email protected] 1
Abstract States which possess clean seas have also capabilities regarding sustainable aquamarine tourism. In this manner, various diving activities in the underwater courses lots such as free or sportive divings with related equipments could be mentioned. Thus particularly Aegean and Mediterranean coasts of Turkey charm thousands of divers regarding marvelous divings spots and underwater riches every year. However states also envisage diversity of innovative positive attempts in this tourism field in order to facilitate right and sound sustainability of aquamarine tourism. In this context, a new and attractive activity field has been created in the sustainable aquamarine tourism in the last years. This is known as “wreck tourism”. States try to make their diving facilities attractive by using wrecks and atrificial reefs and aim to accelerate their sustainable tourism potentials. In this frame, west and south coasts of Turkey commence to become one of the most popular diving points with their artificial reefs and wrecks of planes and ships. The main purpose of this research is to explore contributions and values of wrecks submerged with special conditions and artificial reefs to sustainable aquamarine tourism in the diviable underwater fields which possess new and attractive formations. Thus, in the context of diversity of product offer and presentation in sustainable aquamarine tourism, this study comprises underwater fields of wrecks and artificial reefs being as an attractive touristical innovation. In the context of this research, we will try to analyze and put forward relevant suggestions about how far an attractive touristical product wreck tourism can create for sustainable aquamarine tourism; to what extent this new and attractive potential can stimulate and revive sustainable aquamarine tourism and how far this captivating touristical innovation affect promotional opportunities and significance and effect dimensions regarding regional and tourism mobility. Key words: Sustainable Tourism, Aquamarine Tourism, Diversity of Innovations, Underwater Wreck Tourism.
356
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Uçucu Kül İçerikli Geopolimer Harçların Reolojik Özelliklerinin Belirlenmesi Gökhan GÖRHAN1,*, Gökhan KÜRKLÜ2 Afyon Kocatepe Üniversitesi, Müh. Fak., İnş. Müh. Böl., Afyonkarahisar, TÜRKİYE Afyon Kocatepe Üniversitesi, Müh. Fak., İnş. Müh. Böl., Afyonkarahisar, TÜRKİYE *Sorumlu yazar e-posta:
[email protected]
1 2
Özet Bu çalışmada, geopolimer harçların üretiminde kullanılan hammaddeler sabit tutularak karışımlara ilave edilen alkali solüsyonların reolojik özelliklere yaptığı etkiler araştırılmıştır. Çalışmada endüstriyel atıklardan biri olan uçucu kül ana hammadde olarak kullanılmıştır. Geopolimer malzemelerin üretiminde kullanılan hammaddeler, uçucu kül ve metakaolindir. Çalışmada kullanılan uçucu kül (UK), Kütahya Seyit Ömer Termik Santralinden elde edilen atık malzemedir ve Kütahya’da bulunan özel bir hazır beton firmasından bedelsiz olarak temin edilmiştir. Geopolimer malzeme hazırlanmasında UK ile birlikte kullanılan diğer bir malzeme ise metakaolindir. Metakaolin (MK) ise Kale Maden A.Ş.’den yine bedelsiz olarak temin edilen kaolin kilinin belirli sinterleme sıcaklıklarında kalsine edilmesi sonucu laboratuvar koşullarında elde edilmiştir. Geopolimer harçların hazırlanmasında UK ve MK malzemeleri, alkali aktifleştirici olarak NaOH ve Sodyum silikat solüsyonu (Na2SiO3) - (SS) ile aktifleştirilmiş ve ardından Limak Çimento Fabrikası tarafından üretilen standart kum (silis kumu) karışıma ilave edilmiştir. Hazırlanan geopolimer harç örneklerinin reolojik özelliklerinden olan kayma eşiği ve plastik viskozite değerlerinin tespit edilmesi amacıyla Viskomat-NT reometre kullanılmıştır. Kayma eşiğinin fiziksel tanımı, bir maddeye uygulanan akmanın başlaması için gereken kayma gerilimidir. Plastik viskozite ise maddenin kayma eşiğini aştıktan sonra, akmaya karşı gösterdiği direnci ifade etmektedir. Sonuç olarak, örneklerin hazırlanmasında kullanılan NaOH molaritesinin değişmesiyle birlikte örneklerin plastik viskozite değerlerinde artışlar gerçekleşmiştir. Bünyeye eklenen MK oranı kayma eşiğini genellikle düşürürken, NaOH molarite oranının etkisi de azaltıcı yönde gerçekleşmiştir. Anahtar kelimeler: Geopolimer, Harç, Reoloji, Uçucu kül, Metakaolin.
357
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Determination Of The Reological Properties Of Geopolymer Mortars With Fly Ash Gökhan GÖRHAN1,*, Gökhan KÜRKLÜ2 1
Afyon Kocatepe University, Faculty of Eng., Dep. of Civil Eng., Afyonkarahisar, TURKEY Afyon Kocatepe University, Faculty of Eng., Dep. of Civil Eng., Afyonkarahisar, TURKEY *Responsible author e-mail:
[email protected]
1
Abstract In this study, the raw materials used in the geopolymer mortar production is kept constant and the effects on rheological properties of alkaline solutions that added in mixtures were investigated. The fly ash, that one of the industrial wastes, was used as the raw material in the study. The raw materials used in the production of geopoymer materials were fly ash and metakaolin. In this study, fly ash (FA) is obtained from Kütahya Seyitömer Thermal Power Plant and it is waste material. FA was take from a special ready-mix concrete company. In the geopolymer material production, metakaolin were used as the other material with FA. Metakaolin (MK) was obtained in the results of calcining of kaolin clay with the specific sintering temperatures, in the laboratory conditions. In the preparation of geopolimer mortar, FA and MK materials were activating with NaOH and sodium silicate solution (Na2SiO3) - (SS). Then, standard sand (silica sand) produced by Limak Cment Plant was added in the mixture. For the determining of slip threshold and plastic viscosity values that one the rheological properties of prepared geopolymer mortar samples were used Viskomat-NT reometer. Physical description of the slip threshold is needed to start the flow shear stress applied to the material. Shear stress is needed for to start of the flow applied to the material and this the physical description of the slip threshold. Plastic viscosity is the resistance to flow after exceeding the slip threshold of the material. Consequently, the plastic viskosity values of the samples were increased with change of the NaOH molarity used in the sample production. MK additive rate generally reduces the slip threshold, the effect of the NaOH molarity ratio is decreasing. Key words: Geopolymer, Mortar, Rheology, Fly-ash, Metakaolin.
358
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürdürülebilir Yapı Tasarımında Enerji Verimliliği ve Örnek Bir Çalışma Gökhan KÜRKLÜ1,*, Gökhan GÖRHAN1, Büşra BUCUKA1 1
Afyon Kocatepe Üniversitesi, Afyonkarahisar, Türkiye *Sorumlu yazar e-posta:
[email protected]
Özet Çeşitlilik ve üretkenliği sağlarken devamlılığın korunması için yapılan çalışmalar kabaca sürdürülebilirliği ifade ederken; çevre açısından bu süreklilik çok daha önemli ve çok daha meşakkatli bir uğraşıyı ifade etmektedir. Bu noktada ortaya konan çalışmaların ve hedeflerin görünebilir kılınması daha gerçekçi ve daha kolay kabul gören uygulamalar haline gelebilir. Bu çalışmada henüz tasarım aşamasındayken inşa edilecek yapıların enerji kullanımı ve verimliliği açısından nasıl ele alınabileceği bir yazılım yardımı ile örnek bir yapı üzerinde sunulmuştur. Afyonkarahisar ilinde üç katlı bir okul binasının mimari tasarımının ardından enerji verimliliği açısından tasarım gerçekleştirilmiştir. İnşa edilecek yapı çatı ve duvarlarının ayrı ayrı ve bir arada yalıtımlı ve yalıtımsız olması dikkate alınarak dört farklı durum ortaya konmuştur. Binanın inşa edildiği bölgenin iklimsel özelliklerinden faydalanılarak yıl içerisinde ay bazında ısınmaya ve soğutmaya harcanacak enerji; yakacak ve elektrik olarak hesaplanmıştır. Bunun yanında bölgenin konumuna bağlı olarak güneş ve rüzgar enerjisi potansiyeli hesaplanmıştır. Bu hesaplamaların ardından yapının harcayacağı enerji ve potansiyel yenilenebilir enerji kaynakları dikkate alınarak binanın karbon ayak izi çıkarılmıştır. Sonuç olarak tasarım aşamasındaki bir yapının en olumsuz halinde 342 ton/yıl olarak belirlenen net CO2 salınımının 53 ton/yıl seviyesine gerileyebileceği gösterilmiştir. Çevre için bu karlı durumunun yanında yapı kullanım süresi dikkate alınarak mülkiyet sahibinin de gireceği kar ortaya konduğundan ilk yatırım maliyetlerinin yüksek olması dolayısıyla kuşku ile yaklaşılan yalıtım ve yenilenebilir enerji kaynaklarının kullanımının karlı bir yatırım olduğu tasarım aşamasındayken tüketicilere izah edilebilecektir. Anahtar kelimeler: Enerji verimliliği, yapı tasarımı, sürdürülebilir yapılar.
359
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Energy Efficiency in Sustainable Building Design and a Case Study Gökhan KÜRKLÜ1,*, Gökhan GÖRHAN1, Büşra BUCUKA1 1
Afyon Kocatepe University, Afyonkarahisar, Turkey *Responsible author e-posta:
[email protected]
Abstract To ensure diversity and productivity, while the studies carried out for the protection of continuity expresses roughly sustainability; In terms of environment, this continuity is a much more important and much more difficult task. At this point, it may be more realistic and more easily accepted applications with visualization of the work and the objectives that set out. In this study, it is presented on a sample structure with by software that how to use in view of energy and efficiency for the structures to be built while in the design phase, still. The design was performed for energy efficiency after the architectural design of a three-storey school building in the province of Afyonkarahisar Turkey. Four different situations were investigated for the building. In this stage, it is considering that they are insulated and uninsulated and separately and together conditions of the roof and walls. Utilizing the climatic properties of the area where the building was built, the energy that use on heating and cooling in months within a year was calculated as fuel and electricity. In addition, solar and wind energy was calculated according to the location of the zone. According to these calculations, the carbon footprint of the building was determined considering the energy that used by the building and potential renewable energy sources. As a result, it has been shown that the net CO2 emission, which is 342 tons / year, can be reduced to 53 tons / year in the worst case of a design stage. Besides considering the lifetime of this structure will be put in a profitable situation for the environment also profits to be earned by the owners. For this reason, the use of insulation and renewable energy sources which are approaching with suspicion is a profitable investment for the consumer during the design phase although the first investment costs are high. Key words: Energy efficiency, building design, sustainable constructions.
360
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Millenyum Kalkınma Hedeflerinden Sürdürülebilir Kalkınma Hedeflerine: Değişen Sürdürülebilirlik Söylemleri Karşısında Değişmeyen Politika Entegrasyonu İhtiyacı Gökhan ORHAN1,* Bandırma Onyedi Eylül Üniversitesi, İİBF SBKY Böl, Bandırma, Türkiye *Sorumlu yazar e-posta:
[email protected]
1
Özet Bu çalışma yirminci yüzyılın son çeyreğinden bu yana uluslararası kamuoyunun gündeminde olan sürdürülebilirlik ve sürdürülebilir kalkınma konularına yönetim ve politika analizi çerçevesinden yaklaşmayı ve politika entegrasyonu çerçevesinde bir eleştiri getirmeyi amaçlamaktadır. Bu bağlamda kongrenin konu belirleme sürecinde şekillenen ana temaları ve alt alanlarıyla ilgili temel yönelimine bir eleştiri getirmek de amaçlanmaktadır. Çünkü sürdürülebilirlik sadece bu temalar ve alt alanlarda incelenebilecek ve politikalar geliştirilebilecek bir alan olmayıp, Milenyum Kalkınma Hedefleri ve Sürdürülebilir Kalkınma Hedefleri çerçevesinde ele alınan ve yıllar içinde evrilerek değişen bir çerçevede ele alınmaktadır. Bu noktada sorun sadece bazı tekniklerin bilinmesi ya da bilinmemesiyle değil, bu tekniklerin uygulanabilmesinin koşullarının ortaya konulmasıyla ve çok daha geniş çerçevede ele alınan hakkaniyet ve yaşam kalitesi bazlı hedeflerin kamusal gündeme alınmasıyla alakalıdır. Bu çerçevede çalışma öncelikle sürdürülebilirlik ve sürdürülebilir kalkınma kavramlarının tarihsel çerçevede ele alarak bir çerçeve olarak geliştirilen sürdürülebilir kalkınma yaklaşımının içinin zaman içinde nasıl doldurulduğunu ortaya koymayı amaçlamaktadır. Bu çerçevede 1990’larda Rio Konferansında geliştirilen sürdürülebilir kalkınma hedefleri, sonrasında gündeme gelen Millenyum Kalkınma Hedefleri ve 2030 yılı için geliştirilen Sürdürülebilir Kalkınma Hedefleri ele alınarak incelenecektir. Çalışmanın temel tezi küreselleşme ve çok seviyeli yönetişim düzleminde karşılaşılan her türden sorunların çözümünün hem ulusal hem de uluslararası düzlemde politika entegrasyonu ve işbirliği gerektirdiği yönündedir. Bu noktada karmaşıklaşan sorunların çözümü ve sürdürülebilirlik hedeflerine ulaşmak belli sorun alanlarında geliştirilen teknikler, yeni teknolojiler ya da uygulamalarla sınırlı olmayıp, aksine temel bir yönetim sorunu olduğu ve bu yönetim sorununun çeşitlenen hedefler karşısında hemen her kamu politikası alanına sirayet ettiği görülmektedir. Çalışma böylelikle değişen sürdürülebilirlik hedeflerine ulaşma sürecinin beraberinde getirdiği yönetsel meydan okumaları ortaya koymayı ve bu bulgular çerçevesinde bir eylem planı önermeyi amaçlamaktadır. Anahtar kelimeler: Sürdürülebilirlik, sürdürülebilir kalkınma, politika entegrasyonu, işbirliği.
361
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
From Millennium Development Goals to Sustainable Development Goals: Never Faded Necessity for Policy Integration Despite Changing Policy Discourses Gökhan ORHAN 1,* Bandırma Onyedi Eylül University, İİBF SBKY Böl, Bandırma, Turkey *Responsible author e-mail:
[email protected]
1
Abstract This paper aims to focus on sustainability and sustainable development discourses from an administrative and policy analytic framework and develop a critical approach around the issue of policy integration. In this context, already existing topics of the Congress will be criticised on the basis of their narrow focus towards sustainability. Sustainability cannot be limited to topics listed in the call for papers, because it entails a wide ranging and evolving objectives ranging from Millennium Development Goals to Sustainable Development Goals. The problem with sustainability is not only about lack of certain techniques or problems in their implementation. The problem is also about determining conditions for successful implementation and inclusion of a number of wide ranging goals, ranging from the quality of life to equity, into public policy agenda. In doing so, paper will analyse the evolution of the sustainability and sustainable development discourses from a historical perspective from Rio Conference to. Millennium Development Goals and Sustainable Development Goals in 2015-2030 period. It will be argued in the paper that almost all sorts of problems faced under the conditions of globalisation and multi-level governance necessitates policy integration and policy coordination both at the national and international levels. Solution of complex problems and attainment of sustainability objectives not only require development and implementation of certain techniques. It is an administrative problem and diffused to almost all areas of public policy with newly emerging objectives and challenges. At the end, this paper will identify administrative challenges of new sustainability and sustainable development discourses and propose a course of action on the basis of policy integration and cooperation of relevant players. Key words: Sustainability, sustainable development, policy integration, co-ordination.
362
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sığınma Evinden Ayrılan Kadınların Sürdürebilir Yaşamları Görkem KELEBEK1,* 1 Hacettepe Üniversitesi, Ankara, Türkiye *Sorumlu yazar e-posta:
[email protected]
Özet Aile içi şiddet tüm dünyada olduğu gibi ülkemizde de özellikle kadınların karşılaştığı önemli bir problemdir. Aile içi şiddete maruz kalmak istemeyen kadınlar, gerek Aile ve Sosyal Politikalar Bakanlığı’na bağlı, gerekse belediyelere bağlı sığınma evlerine başvurmaktadırlar. Fakat, sığınma evleri her ne kadar kadınların yaşamını kolaylaştırıcı bir yerde duruyor gibi gözükse de, sığınma evlerinin koşulları her kadın için yeterli uygunlukta ve sürdürülebilirlikte olmamaktadır. Kadın konuk evlerinin açılması ve işletilmesi ile ilgili yönetmeliğin 14. Maddesi’nde belirtildiği üzere; ‘Konuk evinde kalma süresi, kadının ilk kabul birimine kabul tarihinden itibaren altı aydır.’ ibaresi kadınlarının sığınma evindeki yaşamlarının sürdürülebilir olmadığını göstermektedir. Hem sığınma evindeki yaşam sürecinde hem de sonrasında kadınların ‘kendi ayakları üzerinde durabilmeleri’ için ekonomik bağımsızlıklarını kazanmaları önemlidir ve bundan dolayı istihdama katılımlarının sağlanması gerekmektedir. Bu açıdan ise, İŞKUR ve KOSGEB desteği ile kadınların istihdama katılımı sürdürülebilir bir yaşam için karşımıza çıkan önemli bir öneridir. Sığınma evlerindeki kadınların bağımsız yaşamlarının sürdürebilirliğinin sağlanması için, kadınların güçlendirilmesi ve özgürleştirilmesi gerekmektedir. Var olan politikaların feminist kuram çerçevesinde değerlendirilerek mevcut sorunlara çözümler üretecek şekilde yeniden yapılandırılması kadınların her açıdan bağımsız yaşamlarının sürdürebilirliği açısından kritik bir noktada durmaktadır. Bu çalışmada amaç, sığınma evinde kalan ve sığınma evinden ayrılan kadınların, yaşamlarının sürdürülebilirliğini tartışmak ve bu bağlamda öneriler geliştirmektir. Çalışmanın kapsamında sığınma evinde kalan ve bu evden ayrılan kadınların sorunları göz önünde tutularak sürdürülebilir bir yaşam geliştirebilmek için var olan yapılar, ön yargılar ve politik düzen eleştirilerek feminist bir zemin üzerinde kadınlar için sürdürülebilir yaşam yollarını aramak yer almaktadır. Sonuç olarak, bu çalışma sığınma evinden ayrılma sürecinde olan kadınların sonraki yaşamlarını irdeleyerek sürdürülebilir bir yaşamın gereksinimlerini tartışılmaktadır. Anahtar kelimeler: Kadın sığınma evi, kadın, aile içi şiddet, sürdürülebilirlik.
363
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sustainable Living of Women Who Left the Shelter Görkem KELEBEK1,* 1
Hacettepe University, Ankara, Turkey *Responsible author e-mail:
[email protected]
Abstract Domestic violence, especially encountered by women, is an important problem in our country as it is in the whole world. Women who wants to escape from domestic violence, apply to shelters, which are affiliated to the Ministry of Family and Social Policy or municipality. However, although the shelters seem to be in a place that facilitates the life of the women, the conditions of the shelters are not adequate and sustainable for every woman. As stated in Article 14 of the Regulation on the opening and operation of women’s shelter; 'The length of stay in the shelter is six months from the date when the woman was admitted to the first admissions unit.' indicates that the lives of women in their asylum are not sustainable. It is important that women acquire their economic independence in order to 'stay on their feet' both during and after the life of the shelter, and therefore their participation in employment is necessary. In this respect, İŞKUR and KOSGEB support and women's participation in employment is an important proposal for a sustainable life. Women need to be empowered and emancipated in order to ensure the sustainability of the independent lives of women in shelters. The restructuring of existing policies in the framework of feminist theory and in the form of solutions to existing problems is a critical point in terms of the sustainability of the independent lives of women in every view. The purpose of this study is to discuss the sustainability of the lives of women who live in the shelter and who have left the shelter, and develop recommendations in this context. Within the scope of the study is the search for sustainable ways of living for women on a feminist ground by criticizing existing structures, prejudices and political order in order to develop a sustainable life by considering the problems of women who remain and leave the shelter. In conclusion, this study discusses the needs of a sustainable life by examining the later life of women who are in the process of withdrawal from the shelter. Key words: Women’s shelter, women, domestic violence, sustainability.
364
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Turizm Sektörünün Bölgesel Kalkınmada Önemi; Burdur İli Üzerine Bir Araştırma Gülhan DURAN1,*, Aysun Hazel ÖZAYDIN2 Süleyman Demirel Üniversitesi, Isparta, Türkiye Süleyman Demirel Üniversitesi, Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2
Özet Dünyada hızla büyüyen turizm sektörü, ülkelerin kalkınmasında önemli rol oynamaktadır. Özellikle tarım ve sanayi faaliyetleri için yeterli kaynak ve imkâna sahip olmayan bölgelerin, zengin turizm potansiyeline sahip olması bölgelerin kalkınması açısından avantaj sağlamaktadır. Turizm sektörü, toplumsal refah ve gelişimi bakımından ülke ekonomileri için önemli bir potansiyele sahiptir. Turizmin bu özelliği turizm kavramının önemini ön plana çıkarmaktadır. Turizm sektörü; değişen ve gelişen, farklı ve alternatif ürünleriyle birlikte kaynaklarının kullanımını sağlayacak yenilikçi sistemler oluşturmaktadır. Bu sayede deniz- kum- güneş üçlüsüyle anılan kıyı turizmine elverişsiz bölgeler için birçok alternatif çeşitler sunarak bölgelerin kalkınmasına zemin hazırlamaktadır. Özellikle son dönemlerde sektöre olan talep artışının; doğa ile uyumlu, bütün bir yıla yayılabilen, sürdürülebilir turizm yaklaşımını benimseyen ve rekabet üstünlüğü sağlayabilen alternatif turizm türlerinin olduğu alanlarda ön plana çıktığı görülmektedir. Bu noktadan hareketle çalışmada, zengin ve çeşitli turizm kaynaklarına sahip olan Burdur ilinin, alternatif turizm potansiyeli değerlendirilmiştir. Araştırmanın amacı; bölge ekonomisi için alternatif turizm türlerinin geliştirilmesi ve bu gelişimin avantajlarından yararlanılabilmesi için öneriler sunulmaktadır. Araştırmanın kapsamı Burdur ili, Mehmet Akif Ersoy Üniversitesi’nin arkeoloji ve turizm işletmeciliği bölümlerinde öğrenim gören öğrenciler yer almaktadır. Ayrıca Burdur ili kültür ve turizm müdürlüğüne kayıtlı turizm işletmeleri ve turizm acenteleri de örnekleme dahil edilmiştir. Uygulamada öğrencilerin farklı alanlardan geldiğini varsayarak “kota örneklemesi” yöntemi kullanılmıştır. Çalışmada nicel bir yöntem kullanıldığı için anket tekniğinden yararlanılmıştır. Burdur ilinin alternatif turizmin muhtemel etkilerini belirlemeye yönelik sorular, alternatif turizmin gelişmesi açısından avantaj ve dezavantajlarına yönelik sorular ve alternatif turizmde mevcut durumunun analizine yönelik sorular yer almaktadır. İstatistiksel araçlarla yapılan analizler sonucunda elde edilen bulgular yorumlanmıştır. Araştırma sonucunda alternatif turizmin gelişim göstermeye başladığı söylenebilmektedir. Gelişim aşamasında karşılaşılan dezavantajların; tanıtım eksikliği, ulaşım zorluğu, turistik tesis yetersizliği ve bölge halkının olumsuz tutumlarının etkili olduğu tespit edilmiştir. Anahtar kelimeler: Bölgesel Kalkınma, Turizm, Burdur İli, Alternatif Turizm.
365
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Importance Of Tourism Sector In Regional Development; A Research On Burdur Province Gülhan DURAN1,*, Aysun Hazel ÖZAYDIN2 Süleyman Demirel University, Isparta, Turkey Süleyman Demirel University, Isparta, Turkey *Responsible author e-mail:
[email protected] 1
2
Abstract The rapid-growing global tourism sector plays an important role in the development of countries. Especially, regions that do not have sufficient resources and facilities for agricultural and industrial activities, having rich tourism potential has critical advantage for the areas to develop. Tourism sector has critical potential for the countries’ economy in the terms of social welfare and development. This feature of tourism emphasizes the importance of tourism concept. Tourism sector; creates innovative systems that will enable us to use resources with changing and evolving, diverse and alternative products. In this regard it will offer various alternatives for regional development for unfavorable regions for coastal tourism which is known by sea-sun-sand trio. Especially in the recent times; Increasing demand for the sector emerges in the areas where alternative tourism types exist that is compatible with nature, that can be spread to whole year, that adopts the sustainable tourism approch and that can provide a competitive advantage. From this point on, Burdur province’s rich and diverse alternative tourism potential has been evaluated in this study. Purpose of this research is presenting solutions to develop alternative tourism varieties for regional economy and benefit from this evolution. Extent of this research contains archeology and tourism management students of Mehmet Akif Ersoy University in Burdur. Additionally tourism enterprises and tourism agencies have been included in this sampling registered in Burdur culture and tourism directorate. During research “Quota Sampling” method has been used assuming that the students came from different areas. Survey technique has been utilized due to usance of quantitative method in the study. To determine the possible effects of alternative tourism in Burdur province these questions have been included; the pros and cons in the terms of alternative tourism development and questions to analyse the current situation in alternative tourism. Results that was obtained by statistical tools have been interpreted. After the research a development in the alternative tourism has been detected. The disadvantages encountered during the development phase; lack of publicity, transportation difficulties, inadequacies of touristic facilities and influential negative attitudes of the local people have been detected. Key words: Regional Development, Tourism, Burdur Province, Alternative Tourism.
366
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Meta ve Orto Sübstitüe Anilin Türevi Heterosiklik Disazo Boyarmaddelerin Sentezi ve Sübstitüent, Asit ve Baz Etkisinin İncelenmesi Aykut DEMİRÇALI1,*, Gülnihal ERTEN1, Fikret KARCI1 Pamukkale Üniversitesi, Fen Edebiyat Fakültesi, Kimya Bölümü, Denizli, Türkiye *Sorumlu yazar e-posta:
[email protected]
1
Özet Bu çalışmada meta ve orto köşelerinde elektron verici ve elektron çekici sübstitüe gruplar olan anilin türevleri diazolanmış ve malononitril ile reaksiyona sokularak, arilazo-malononitril (1f-1m) bileşikleri sentezlenmiştir. Sentezlenen bu aril azo malononitril bileşikleri hidrazin monohidrat ile etkileştirilerek 4-arilazo-3,5-diamino-1H-pirazol (2f2m) türevleri elde edilmiştir. Daha sonrasında ise 2f-2m bileşikleri yeniden diazolanmış ve bu bileşiklerin diazonyum tuzları barbitürik asit ile reaksiyona sokularak 5-(3'-amino4'-arilazo-1H-pirazol-5'-il-azo) barbitürik asit (3f-3m) bileşikleri oluşturulmuştur. Elde edilen 5-(3'-amino-4'-arilazo-1H-pirazol-5'-il-azo) barbitürik asit (3f-3m) bileşiklerinin yapıları AT-IR, 1H-NMR ve UV-Vis. spektroskopisi gibi yöntemlerle karakterize edilmiştir. Ayrıca bu 8 bileşiğin farklı çözücülerdeki asit, baz ve sübstititüent etkileri incelenmiştir. Anahtar kelimeler: Sübstitüe Anilin, Diazolama, Heterosiklik Bileşik, Pirazol, Barbitürik asit.
367
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Synthesis of Meta and Ortho Substituted Aniline Derivative Heterocyclic Disazo Dyes and Investigation of Substituent, Acid and Base Effect Aykut DEMİRÇALI1,*, Gülnihal ERTEN1, Fikret KARCI1 Pamukkale University, Faculty of Science and Art, Department of Chemistry, Denizli, Turkey *Responsible author e-mail:
[email protected]
Abstract In this study, the aniline derivatives which are electron donating and electron attracting substituent groups at the meta and ortho angles were diazotized and reacted with malononitrile to synthesize aryl-azo-malononitrile (1f-1m) compounds. These synthesized aryl azo malononitrile compounds were reacted with hydrazine monohydrate under reflux to obtain 4-arylazo-3,5-diamino-1H-pyrazole (2f-2m) derivatives. Subsequently, the 2a2m compounds were again diazotized and the diazonium salts of these compounds were reacted with barbituric acid to form 5- (3-amino-4-arylazo-1H-pyrazol-5-yl-azo) barbituric acid compounds (3f-3m). The structures of 5- (3'-amino-4'-arylazo-1Hpyrazole-5'-yl-azo) barbituric acid (3f-3m) compounds were characterized by methods such as AT-IR, 1H-NMR and UV-Vis. spectroscopies. Also, acid, base and substitutent effects of these 8 compounds in different solvents have been investigated. Key words: Substituted aniline, Diazotisation, Heterocyclic compound, Pyrazole, Barbituric acid.
368
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Anilin ve Para Sübstitüe Anilin Türevlerinden Yeni Heterosiklik Disazo Boyarmaddelerin Sentezi ve Absorpsiyon Özelliklerinin İncelenmesi Aykut DEMİRÇALI1,*, Gülnihal ERTEN1, Fikret KARCI1 Pamukkale Üniversitesi, Fen Edebiyat Fakültesi, Kimya Bölümü, Denizli, Türkiye *Sorumlu yazar e-posta:
[email protected]
1
Özet Yapılan bu bilimsel çalışma çerçevesinde, anilin ve p-sübstitüe anilin türevleri diazolanmış ve malononitril ile reaksiyona sokularak, aril-azo-malononitril (1a-1e) bileşikleri sentezlenmiştir. Sentezlenen bu aril azo malononitril bileşikleri geri soğutucu altında hidrazin monohidrat ile etkileştirilerek 4-arilazo-3,5-diamino-1H-pirazol (2a-2e) türevleri elde edilmiştir. Daha sonrasında ise 2a-2e bileşikleri yeniden diazolanmış ve bu bileşiklerin diazonyum tuzları barbitürik asit ile reaksiyona sokularak 5-(3'-amino-4'arilazo-1H-pirazol-5'-il-azo) barbitürik asit (3a-3e) bileşikleri oluşturulmuştur. Elde edilen 5-(3'-amino-4'-arilazo-1H-pirazol-5'-il-azo) barbitürik asit (3a-3e) bileşiklerinin yapıları AT-IR, 1H-NMR ve UV-Vis. spektroskopisi gibi yöntemlerle karakterize edilmiştir. Sonuç olarak azo boyarmadde ve tekstil literatürüne pirazol ve barbitürik asit halkası içeren 13 adet yeni dispers disazo boyarmaddeleri kazandırılmıştır. Anahtar kelimeler: Diazolama, Heterosiklik Bileşik, Pirazol, Barbitürik asit.
369
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Synthesis and Absorption Characteristics of New Heterocyclic Disazo Dyes from Aniline and Para Substituted Aniline Derivatives Aykut DEMİRÇALI1,*, Gülnihal ERTEN1, Fikret KARCI1 1
Pamukkale University, Faculty of Science and Art, Department of Chemistry, Denizli, Turkey *Responsible author e-mail:
[email protected]
Abstract In this scientific work, aniline and p-substituted aniline derivatives were diazotized and reacted with malononitrile to synthesize aryl-azo-malononitrile (1a-1e) compounds. These synthesized aryl azo malononitrile compounds were reacted with hydrazine monohydrate under reflux to obtain 4-arylazo-3,5-diamino-1H-pyrazole (2a-2e) derivatives. Subsequently, the compounds 2a-2e were again diazotized and the diazonium salts of these compounds were reacted with barbituric acid to form 5- (3-amino-4-arylazo1H-pyrazol-5-yl-azo) barbituric acid compounds (3a-3e). The structures of 5- (3'-amino4'-arylazo-1H-pyrazole-5'-yl-azo) barbituric acid (3a-3e) compounds were characterized by methods such as AT-IR, 1H-NMR and UV-Vis. spectroscopies. As a result, 13 new disperse disazo dyes containing pyrazole and barbituric acid ring were added to azo dyestuff and textile literature. Key words: Diazotisation, Heterocyclic compound, Pyrazole, Barbituric acid.
370
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Green Membrane for the Separation of Acetic Acid-Water Mixtures by Evapomeation Gülsen ASMAN1,*, Ebru KONDOLOT SOLAK2, Sinem PAKIR3 1,3
Gazi University, Faculty of Science, Department of Chemistry, Ankara, Turkey Gazi University, Technical Sciences Vocational School, Department of Chemistry and Chemical Processing Technologies, Ankara, Turkey *Responsible author e-mail:
[email protected]
2
Abstract In recent years membrane separation processes are attractive processes because of their energy saving and efficient-separation properties. Evapomeation is one of the types of membrane separation process in which membrane separates two vapor phase from each other. The first side of the membrane meets with feed vapor at the atmospheric pressure and the other side is faced to permeate at a low pressure. The required temperatures for these processes are lower temperatures with respect to that required for simple distillation processes. In this study acetic acid-water mixtures were tried to be separated by using evapomeation method and the membrane used in the process was prepared from corn starch/poly(vinyl alcohol) blend, where corn starch was used as sustainable material. The effect of acetic acid concentration and temperature on the selectivity and permeation rate (flux) of the membranes was studied. At the end of the study it was determined that increase in temperature increased the flux while decreasing the membrane selectivity. Increase in acetic acid concentration decreased the membrane water selectivity. As a result it was stated that, the starch/PVA membranes are very effective membrane systems to separate acetic acid-water mixtures by evapomeation method especially for the lower acetic acid concentrations at low temperatures. Key words: Green chemistry, evapomeation, green membrane, acetic acid-water mixtures.
371
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Ultrasonication: A Green Membrane-Modification Method Gülsen ASMAN1,*, Ebru KONDOLOT SOLAK2, Gülşen TAŞKIN3 1
Gazi University, Faculty of Science, Department of Chemistry, Ankara, Turkey Gazi University, Technical Sciences Vocational School, Department of Chemistry and Chemical Processing Technologies, Ankara, Turkey 3 Cumhuriyet University, Department of Chemistry and Chemistry Processing Technology, Yıldızeli, Sivas, Turkey *Responsible author e-mail:
[email protected] 2
Abstract Ultrasonics is a branch of acoustics and deals with sound waves with a frequency greater than 20 kHz. When an ultrasound beam passes through a matter, it generates dynamic forces resulting in local elevation of thermal energy and pressure which can cause changes in physical, chemical, or biological properties of materials. Nowadays ultrasonics is a well-known green technique and opens up an efficient and green route for the formation of new morphologies, materials and surfaces, as well as for polymeric materials. In this study ultrasonication was used as a green modification technique since for a polymeric membrane modification method to be green, it should be a non-toxic process and should reduce environmental hazards at its source by minimizing or eliminating the use of harmful chemicals. By this aim, in this study ultrasonication at a frequency of 35 kHz was applied to poly(vinyl alcohol) (PVA) based membranes as a green modification method to increase their permeability. Ultrasonication was applied directly to the soid phase membranes in a water bath without using any additional chemical. The characteristic of the membranes was investigated by swelling measurements, DSC and ESCA analysis. It was determined that the application of ultrasonics removes some polymeric material from the membrane and leads to an increase in the permeability and swelling ability of the membranes. Key words: Green chemistry, ultrasonication, membrane, green modification.
372
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Peyzaj Tasarımında Nano Teknolojik Malzeme Kullanımı Gülşen CENGİZ1,* Dokuz Eylül Üniversitesi, Mimarlık Fakültesi, Mimarlık Bölümü, İzmir, Türkiye
1
*
Sorumlu yazar e-posta:
[email protected]
Özet Teknolojinin gelişimiyle birlikte malzemenin strüktür yapısına mikro ölçekte yapılan müdahalelerden sonra nano ölçekte müdahale edilmesi de mümkün olmuştur. Böylece buluş niteliği taşıyan nano teknolojik malzemeler yapı elemanlarına uygulanmaya başlamış ve malzemenin özelliğini iyileştirmiştir. Bu çalışmanın amacı yapı malzemelerine uygulanmış nano teknolojik malzemelerin peyzaj mimarisi tasarımını nasıl etkilediği ve oluşturduğu katkı değerleri incelemektir. Çalışmanın kapsamı peyzaj mimarisi tasarımında uygulanmış nano teknolojik uygulamalardır. Çalışmanın yöntemi ise, literatür taraması ve karşılaştırma yönteminin kullanılmasıdır. Anahtar kelimeler: Nanoteknoloji, Peyzaj Tasarımı.
373
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Nano Technological Material Usage In Landscape Design Gülşen CENGİZ1,* Dokuz Eylül Üniversitesi, Mimarlık Fakültesi, Mimarlık Bölümü, İzmir, Türkiye * Responsible author e-mail:
[email protected]
1
Abstract With the development of the technology, it was possible to intervene the structure of the material in the nanoscale after the micro scale interventions. Thus, the nanotechnological invention has begun to be applied to building materials, they have new qualities and the application improved the property of the material. The purpose of this study is to examine the contribution of nanotechnology materials applied to building materials in landscape architecture design. The scope of the work is nano technological applications applied in the landscape architecture design. The method of study is literature review and comparison method. Key words: Nanotechnology, Landscape Design.
374
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Kent Peyzajı Tasarımında Yenilenebilir Enerji Kaynaklarının Kullanımı Gülşen CENGİZ1,* Dokuz Eylul University, Architecture Faculty, Architecture Department, İzmir, Turkey * Sorumlu yazar e-posta:
[email protected]
1
Özet
Peyzaj mimarlığı tasarımında yenilenebilir enerji kaynaklarının kullanımı alanın ihtiyaçları doğrultusunda farklı kullanımlarla bütünleşik hale gelmiştir. Bu bağlamda yapılan çalışmalarda güneş enerjisi panelleri gölge elemanı olarak veya seralarda saydam yüzey üzerine basılmış fotovoltaik noktalar halinde görmek mümkündür. Bu yöntemi diğer kaynaklar içinde uygulanmak mümkündür. Yenilenebilir enerji üreten mekanik cihazları günlük ihtiyaçlarımızla birleşik hale getirerek günlük hayatın içine sokmak ve kullanımını yaygınlaştırmak, kaynak kullanımını azaltacak ve sürdürülebilirliğe katkı sağlayacaktır. Bu çalışmanın amacı peyzaj tasarımında kentlerdeki peyzaj tasarımlanın incelenerek yenilenebilir enerji kaynaklarının kullanıldığı örnekleri incelemektir. Çalışmanın kapsamı, kent alanlarda yenilenebilir enerjinin kullanıldığı kent peyzajı tasarımlarıdır. Çalışmanın yöntemi ise literatür taraması yapmak ve karşılaştırma yöntemi kullanmaktır. Anahtar kelimeler Kentsel peyzaj tasarımı, Yenilenebilir enerji kaynakları.
375
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Usage Of Renewable Energy Resources To Urban Landscape Design Gülşen CENGİZ1,* Dokuz Eylul University, Architecture Faculty, Architecture Department, İzmir, Turkey *Responsible author e-mail:
[email protected]
1
Abstract
The use of renewable energy resources in landscape architecture design has been integrated through different uses in order to the needs of the area. In this context, solar energy panels can be seen as shadow elements or as photovoltaic points printed on the transparent base in the greenhouses. This method can also be applied from other renewable resources. By integrating the mechanical devices that produce renewable energy with our needs and bringing them into daily life and spreading the usage of them will reduce the environmental resource usage and contribute to the sustainability. The purpose of this study is to examine examples of the use of renewable energy sources by studying urban landscape design. The scope of the work is urban landscape designs using renewable energy in urban lands. The method of study is to use the comparison method and making a literature search. Key words: Urban Landscape Design, Renewable Energy Sources.
376
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sustainable Banking Günay Kocasoy1* *
1 KAKAD, Boğaziçi University, İstanbul, Turkey Responsible author e-mail: kocasoy @boun.edu.tr
Abstract Sustainability has been one of the hottest topics during the last decade. Both economically developed and developing countries during their combat of industrialization have deteriorated the environment, caused the change of ecological balance and global climate change, extinction of biodiversity, and also the natural resources. During the period of industrialization, ego-centric, altruistic approach was dominant. As the world population increased, the negative impact of overpopulation as well as the developed industry on the environment reached to such levels that public awareness has been created and people became more sensitive toward environment. Along with the public sensitivity toward the environment -new concept-sustainability- sustainable development has emerged. Industry started to change their processes with the ones using less energy, replacing the hazardous raw materials with more safe chemicals, etc. By using the innovative technologies they try to protect the environment while enriching the economic productivity. Banks are generally considered as environmentally friendly institutions. They do not have negative impacts on the environment significantly through their own ‘internal’ operations; but they contribute to the environmental pollution, deterioration ‘externally’ through the activities of their customers. The banks are the major sources of financing the most polluting industrial projects such as paper, chemicals, textiles, fertilizers, cement, steel, power, etc., which have the maximum carbon emission. Therefore, the banking sector feeling pressure from public, governments and NGOs has decided as a social responsibility to adopt the environmentally friendly banking operations and to support the clean technology, pollution reducing and alternative energy projects in order to help the reduction of the internal carbon footprint and external carbon emission. This is called “green banking” which means “sustainable” or “ethical” banking aiming the protection of environment and conservation of natural resources. It is considered as the tenet of the sustainability. The policy of the banks about applying the on-line banking, production of green credit card, using solar and wind energy and power saving equipment, reduction of paper usage are the strategies of the banking sector to reduce its carbon footprint. Creating the awareness of green banking among the bank employees, customers and public; using green products at the bank operations; assessing and monitoring the environmental impacts of the external commercial activities which they have been lending loan are among the objectives of the green banking. The emergence, phases and suggestions of establishing green banking, codes of Equator Principles and green rating standards and environmental and social norms of the World Bank will be discussed in detail at the final manuscript. Key words: Carbon emission, carbon footprint, environment, Equator Principles, green banking, social responsibility, sustainability.
377
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Yeşil Bankacılık Günay Kocasoy1,* 1 KAKAD, Boğaziçi University, İstanbul, Turkey *Sorumlu yazar e-posta: kocasoy @boun.edu.tr
Özet “Sürdürülebilirlik” kavramı günümüzde üzerinde en çok durulan konulardandır. Ekonomik olarak gelişmiş ve gelişmekte olan ülkeler sanayileşme sürecinde çevreye zarar vermiş, çevre kirliliğine, ekolojik dengenin bozulmasına, doğal kaynakların tükenmesine, küresel iklim değişikliğine ve biyolojik çeşitliliğin azalmasına neden olmuşlardır. Bu süreçte ülkeler sadece günü ve kendi yararlarını ön planda tutarak egoist bir yaklaşım sergilemişlerdir. Dünya nüfusunun artmasının ve sanayileşmenin kontrolsüz bir şekilde gelişmesinin, çevre üzerindeki olumsuz etkileri zamanla toplumda çevre bilincinin ve duyarlılığının artmasına neden olmuş, bu duyarlılık sonucu “sürdürülebilirlik”, sürdürülebilir kalkınma” kavramları ortaya çıkmıştır. Sanayide kullanılan prosesler daha az enerji kullanan proseslerle, tehlikeli kimyasal maddeler daha az tehlikeli olanlarla değiştirilmeye başlanmış, ekonomik kalkınma ve sanayileşme çabalarında temiz teknolojilerin kullanılmasına özen gösterilerek çevre korumacılığı ön plana çıkarılmıştır. Bankacılık ve finans sektörü, çevre dostu bacasız sanayi olarak adlandırılır. Finans sektörü faaliyetlerinin çevre üzerine doğrudan olumsuz etkileri olmamakla beraber destekledikleri projeler vasıtasıyla çevre kirliliğinin artmasına önemli ölçüde neden olmaktadırlar. Kâğıt, kimya, tekstil, gübre, çimento, çelik ve enerji projeleri gibi çevreye zarar veren, karbon emisyonuna, çevre kirliliğine neden olan sektörlerin projeleri bankalar tarafından desteklenmektedir. Toplumdan, devletten ve sivil toplum örgütlerinden görülen baskı üzerine finans sektörü, karbon ayak izlerinin ve karbon emisyonlarının azaltılması için sosyal sorumluluk örneği olarak bankacılık faaliyetlerinde çevre dostu işlemleri uygulamaya, temiz teknoloji, çevre kirliliğini önleyici, bertaraf edici ve alternatif enerji projelerini destekleme kararını almışlardır. “Sürdürülebilir” veya “etik” bankacılık anlamına gelen bu yaklaşıma “yeşil bankacılık” veya “çevre dostu bankacılık” adı verilmektedir. Finans sektörü bankacılık işlemlerinden kaynaklanan karbon ayak izlerini azaltmak amacıyla internet bankacılığının kullanılmasını teşvik etmek, yeşil kredi kartı gibi ürünleri öne çıkartmak, güneş ve rüzgâr enerjisini, enerji sakınımlı cihazları kullanmak, kâğıt kullanımını azaltmak gibi stratejileri çevre politikaları olarak kabul edip uygulamaya başlamışlardır. Yeşil ürünlerin kullanılması, destekleyecekleri projelerin çevresel etkilerini değerlendirmek, izlemek prensiplerini uygulayarak banka çalışanlarını, müşterilerini ve toplumu yeşil bankacılık konusunda bilinçlendirmek, “yeşil bankacılığın” çevre politikalarının” amaçları arasındadır.
378
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Tebliğde yeşil bankacılığın tarihçesi ve gelişimi, uygulamalarda öne çıkan prensipleri, “Ekvator Prensipleri-Equator Principles”, yeşil bankacılık uygulama standartları ve Dünya Bankası’nın önerdiği normlar detaylı olarak incelenecektir. Anahtar Kelimeler: Çevre, Ekvator Prensipleri karbon ayak izi, karbon emisyonu, sosyal sorumluluk, sürdürülebilirlik, yeşil bankacılık.
379
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Kültürel Sürdürülebilirlik Bağlamında Müzikte Yenilik Çalışmaları Günsu YILMA ŞAKALAR1,* Yıldız Teknik Üniversitesi Sanat ve Tasarım Fakültesi, İstanbul, Türkiye *Sorumlu yazar e-posta:
[email protected]
1
Özet Kültürler arası ortak bir dil olan müzik; toplumları bir araya getiren birleştirici bir unsur olarak çağlar boyunca süregelmiştir. Asya’dan Avrupa’ya uzanan kıtalararası yolculukta, müzik birleştirici bir rol oynamıştır. Gezgin müzisyenler, halk ozanları müzik aletleri ile birlikte kültürlerarası yol almış, savaşlar döneminden barışlar dönemine dek müzik hep yıllar boyunca var olmuştur. İnsanoğlu, sevincini kederini müzik ile dile getirmiş, böylelikle müzik, sürekli gelişmiştir. 20.yy’da teknoloji ve sanayinin hızla gelişmesi, müziğe de yansımıştır. Müzik aletlerinin, ses kayıt cihaz ve programlarının geliştirilmesi müziğin de çeşitli şekilde ifade edilmesinde önemli rol oynamaktadır. Müzik icracılığı, çalgı yapımı, müzik teknolojileri, etnomüzikoloji, organoloji (çalgı bilimi), müzik sosyolojisi, müzik terapi, müzik psikolojisi, müzik teorisi vb. alanlar bilime katkı sağlamaktadır. Bu alanlara bağlı olarak her geçen gün yenilikçi çalışmalar gün yüzüne çıkmaktadır. Türkiye’de kültürel sürdürülebilirlik ekseninde müzik alanında yapılan yenilikçi çalışmalar araştırmanın çıkış noktasını oluşturmaktadır. Araştırmada, 1996-2016 yılları arasında müzik alanında gerek yurt içi gerekse yurtdışı yapılan patent, faydalı model, tasarım çalışmaları incelenmiş, dünyadaki hedef pazardaki yeri belirlenmiştir. Son olarak, bu çalışmaların Türkiye’ye gerek kültürel gerekse ekonomik kalkınma bağlamında ne gibi katkılar sağlayacağı gündeme getirilmiştir. Anahtar kelimeler: Müzik, patent, faydalı model, tasarım, kalkınma.
380
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Innovative Studies in Music in the context of Cultural Sustainability Gunsu YILMA SAKALAR1,* 1
Yildiz Technical University, Art and Design Faculty, Istanbul, Turkey *Responsible author e-mail:
[email protected]
Abstract As a common language among cultures, music has continued throughout the ages as a unifying element that brings societies together. In the intercontinental journey from Asia to Europe, music played a unifying role. Troubadours, folk poets with musical instruments have traveled interculturally and from war to peace, music has existed for many years. People have expressed the joy of sorrow with music. Thus, music is constantly developing. The rapid development of technology and industry in the 20th century reflected the music as well. The development of musical instruments, sound recorders and programs play an important role in expressing music in various ways. The areas of music such as, performance of music, psychology of music, music technology, instrument manufacturing, music theory, ethnomusicology, organology, sociology of music, musicotherapy are contribute to the science. Depending on these areas, innovative works come to light every day. Innovative studies in the field of music are starting point on the line of cultural sustainability in Turkey. In this research, patents, utility models, design studies done both in domestic and abroad have been examined in the music field and the place of the target market in the world has been determined between 1996 and 2016. Finally, it has been pointed out how these efforts will contribute to Turkey's cultural and economic development context. Key words: Music, patent, utility model, design, development.
381
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Denizyolu Limanlarının Bölgesel Kalkınmaya Etkisi ve Tekirdağ İli Örneği Güzide Öncü EROĞLU PEKTAŞ1, Fatih ORMANLI2*, İstanbul Üniversitesi, İstanbul, Türkiye İstanbul Üniversitesi, İstanbul, Türkiye *Sorumlu yazar e-posta:
[email protected] 1 2
Özet Dünya üzerinde genel bir inceleme yapıldığında görülüyor ki nüfus, ticaret ve refah düzeyinin yüksek olduğu bölgelerin bazı ortak özellikleri vardır. Bu yerlerin bir kısmını başkentler ya da tarihi olan sanayi ve ticaret merkezleri oluştururken, bazı yerleri de coğrafik olarak özellikle kıyı kesimlerinde yer alan güçlü liman bağlantısı olan kentler ve liman merkezleri oluşturmaktadır. Küreselleşmenin ekonomik hakimiyetinde olan günümüzde ticaret lojistikten bağımsız olarak düşünülemez. Hammadde, üretim, tüketim üçgeninin binlerce kilometreyi bulabilen çevresinde dolanarak bu üç faktörün ortak bir noktada buluşturulması ancak ve ancak gelişmiş taşımacılık ağlarıyla mümkündür. Taşımacılığın ana faktörü ve taşımacılık ağlarının temel birleştiricisi ise denizyolu taşımacılığıdır. Denizyolu, Dünya üzerinde yapılan bütün taşımacılık faaliyetlerinin %84’lük kısmında etkin bir rol oynamaktadır. Bu lojistik faaliyetlerinin başlangıç ve bitiş noktasında limanlar yer almaktadır. Limanların yarattığı bu artı değer günümüz Batı Avrupa nüfusunun dağılımına da karar vermiştir. İç suyolu taşımacılığı ticari olarak bakıldığında daha ekonomik olduğu için tercih edilen Ren Nehri’nde gemilerle taşınan ürünlere ve ticari güce kayıtsız kalamayan halk, son yüz yıllık süreç içerisinde bölgede bulunan nüfusu ve nüfus yoğunluğunu ciddi düzeyde arttırmıştır. Türkiye’nin Tekirdağ ilini incelediğimizde ülkenin geri kalanına oranla oldukça yüksek bir nüfus artış oranı görmekteyiz. Şehirde bulunan nüfusun dağılımına baktığımızda ise limana yakın ilçelerde daha yüksek bir nüfus görülmektedir. Ayrıca liman bölgesine yaklaştıkça hizmet ve sanayi sektörleri hakim konumda görülmekteyken limandan uzaklaşıldığında ticari temellerinin dayandığı tarım sektörü hakimiyeti ele almaktadır. Limanların bulundukları bölgeye ticari ve ekonomik açıdan ciddi avantajlar getirdiği aşikardır. Ancak bu durum limanların her zaman ve her konumda bölgesel kalkınmaya ve ticarete etki edeceği şeklinde yorumlanmamalıdır. Liman yerinin konumu, hinterlandı, işlem ve depolama hacmi ve diğer birçok etken liman yatırımı öncesinde değerlendirilmelidir. Bu değerlendirmeler bölgesel kalkınmanın miktarını ve limanın bu kalkınmaya etkisini direkt olarak etkileyecektir. Çalışmada öncelikle makro açıdan Ren Nehri değerlendirilmiş olup, sonrasında Tekirdağ ilinin liman faaliyetlerinin bölgesel kalkınmaya olan etkisi araştırılmıştır. Çalışma kalitatif bir araştırma olup, gelecek araştırmalarla kantitatif araştırma boyutu planlanmıştır. Liman hizmetleri, denizyolu taşımacılığı ve bölgesel kalkınma açısından konu ayrıntılı olarak değerlendirilmiş ve öneriler getirilmiştir. Anahtar kelimeler: Bölgesel kalkınma, denizyolu taşımacılığı, denizyolu limanı, Tekirdağ.
382
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Impact of Ports on Regional Development and the Case of Tekirdag Province Güzide Öncü EROĞLU PEKTAŞ1, Fatih ORMANLI2* Istanbul University, İstanbul, Turkey Istanbul University, İstanbul, Turkey * Responsible author e-mail:
[email protected] 1 2
Abstract A general review of the world shows that there are some common characteristics of areas where population, commerce and welfare are high. Some of these places are capital cities or historical industrial and commercial centers, while some of them are geographically located in cities and port centers with strong port connections especially in coastal areas. In today's economic dominance of globalization, trade can not be considered independently of logistics. It is only through advanced transportation networks that these three factors can be brought together in a common place by circulating the raw material, production, consumption triangle around thousands of kilometers. The main factor of transportation and the main unifying agent of transportation networks is maritime transportation. The seaborne plays an active role in 84% of all transport activities on Earth. Ports are located at the beginning and end of these logistics activities. This added value created by the harbors also decided on the distribution of today's Western European population. The inland waterway transportation is more economical when viewed commercially. The products that are transported by ship on the River Rhine, and the people who can not be ignorant of the trade, have significantly increased the population and population density in the region in the last hundred years. When we examine Turkey's province of Tekirdag, we see a very high population growth rate compared to the rest of the country. When we look at the distribution of the population in the city, a higher population is seen in the regions near the port. Moreover, as the service and industry sectors are dominant as the port area approaches, the agricultural sector dominates the commercial bases when away from the port. It is clear that the ports have serious commercial and economic advantages. However, this situation should not be interpreted as harbors that will effect regional development and commercialization at all times and in every location. Port location, hinterland, transaction and storage volume and many other factors should be assessed prior to port investment. These assessments will directly affect the amount of regional development and the impact of the port on this development. In the study, firstly the Rhine River was evaluated from the macro point of view and then the effect of the port activities of Tekirdağ province on the regional development was investigated. The study is a qualitative research and quantitative research dimension is planned with future researches. The subject has been evaluated in detail in terms of port services, maritime transport and regional development, and recommendations have been made. Key words: regional development, maritime transport, seaport, Tekirdag
383
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Alzeimer İlaçlarının Kemometrik Tayini Güzide Pekcan ERTOKUŞ1,*, Kübra Nur ÇATALYÜREK2 Süleyman Demirel Üniversitesi, Isparta, Türkiye Süleyman Demirel Üniversitesi, Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2
Özet Donepezil, rivastigmene türü alzeimer ilaçlarının, temel bileşen regresyonu (PCR) ve kısmi en küçük kareler yöntemi (PLS) ile eş zamanlı tayini spektrofotometrik olarak yapılmıştır. Çok değişkenli kalibrasyon yöntemleri iki veya daha fazla bileşik ihtiva eden karışımların spektral veri analizinde kullanılır. Kullanılan kemometrik yöntemler ile kemometrik-spektrofotometrik yöntem ve klasik UV-spektrofotometrik yöntem karşılaştırmalı olarak kullanılmıştır. Yazılım, matematik ve istatistiğin kimya uygulaması olan kemometrinin donepezil, rivastigmene türü alzeimer ilaçlarının eş zamanlı tayinine uygulanmasını sağlanmıştır. Kemometrik tekniklerle, karmaşık sistemlerin bile herhangi bir ön ayırma işlemine tabi tutulmadan, olduğu gibi spektrofotometrik olarak analizine olanak sağlar, bu kolaylığı donepezil ve rivastigmene türü alzeimer ilaçlarının tayini için kullanarak istatistiksel olarak daha güvenilir sonuçlar elde edilmiştir. Anahtar kelimeler: Temel Bileşen Regresyonu (PCR), Kısmi En Küçük Kareler Metodu (PLS), Kemometri.
384
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Chemometric Determination Of Alzheimer's Drug Güzide Pekcan ERTOKUŞ1,*, Kübra Nur ÇATALYÜREK2 1
Suleyman Demirel University, Isparta, Turkey Suleyman Demirel University, Isparta, Turkey *Responsible author e-mail:
[email protected] 2
Abstract Simultaneous determination of donepezil, rivastigmene type alzheimer drugs with principal component regression (PCR) and partial least squares method (PLS) was performed spectrophotometrically. Multivariable calibration methods are used in spectral data analysis of mixtures containing two or more compounds. The chemometricspectrophotometric method and the classical UV-spectrophotometric method with comparative chemometric methods were used. The software has been applied to the simultaneous determination of chemometry, a chemistry application of mathematics and statistics, of donepezil, rivastigmene type alzheimer drugs. With chemometric techniques, even complex systems can be analyzed spectrophotometrically, as if they were not subjected to any pre-separation. Statistically more reliable results have been obtained using this ease for identification of donepezil and rivastigmene type chemotherapeutic drugs. Key words: Principle component regression (PCR), Partial least squares (PLS), Chemometry.
385
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
İkili İlaç Kombinasyonlarının Kemometrik Analizi Güzide Pekcan ERTOKUŞ1,*, Murat YILDIZ2 Süleyman Demirel Üniversitesi, Isparta, Türkiye Süleyman Demirel Üniversitesi, Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2
Özet İkili İlaç Kombinasyonunlarının PLS ve PCR ile eşzamanlı olarak belirlenmesi için bir yöntem geliştirilmiştir. Çok değişkenli kalibrasyon teknikleri, karışımların veri analizleri için kullanılan güçlü analitik araçtır. En yaygın kullanılan tekniklerden örneğin, klasik en küçük kareler yöntemi (CLS), ters kareler yöntemi (ILS), temel bileşen regresyonu (PCR) ve kısmi en küçük kareler yöntemi (PLS) bileşiklerin miktarının belirlenmesi için kullanılır. Çok değişkenli kalibrasyon yöntemleri iki veya daha fazla bileşik ihtiva eden karışımların spektral veri analizinde kullanılır. Bu çalışmada, parasetamol-metaklopramid kombinasyonunun herhangi bir ayırma işlemi olmadan eşzamanlı olarak belirlenmesi için Kısmi En Küçük Kareler Yöntemi (PLS) ve Temel Bileşen Regresyonu (PCR) kullanılmıştır. Bu iki yöntem için kemometrikspektrofotometrik yöntem ve klasik UV-spektrofotometrik yöntem karşılaştırmalı olarak kullanılmıştır. Ayırma işlemi, çok karmaşık, zaman alıcıdır ve deneysel masrafın artmasına neden oluyor. Dahası, tam ayırma kolay değildir ve ayrılmanın tamamlanmaması, analitik doğruluğun azalmasına neden olur. Genellikle, bu ilaç aktif maddelerinin belirlenmesinde spektrofotometre kullanılır ve ciddi bir spektral örtüşme olduğundan daha önce ayrılma her zaman söz konusudur. Kemometrik teknikler sağlam bir matematiksel ve istatistiksel arka plan üzerine kuruludur. Anahtar kelimeler: Temel Bileşen Regresyonu (PCR), Kısmi En Küçük Kareler Metodu (PLS), Kemometri.
386
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Chemometric Analysis Of Binary Drug Combination Güzide Pekcan ERTOKUŞ1,*, Murat YILDIZ2 1
Suleyman Demirel University, Isparta, Turkey Suleyman Demirel University, Isparta, Turkey *Responsible author e-mail:
[email protected] 2
Abstract A method is proposed for the simultaneous determination of Binary Drug Combination by PLS and PCR. Multivariate calibration techniques were powerful analytical tools to used in data analysis for the mixtures. The most widely used techniques, e.g., classical least square (CLS), inverse least square (ILS), principal component regression (PCR), partial least square (PLS) were determinated the amount of the compounds. Multivariate calibration methods are used in the spectral data analysis for the mixtures containing two or more compounds. In this work, Partial Least Squares (PLS), Principal Component Regression (PCR) was used for the simultaneous determination of paracetamole-metaclopromide combination without any separation stey. Two methods were used chemometric-spectrophotometric method and classical UVspectrophotometric method comparatively. The separate operation is very complicated and time-consuming, and leads to the increase of experimental expense. Furthermore, complete separation is not easy, and the incompletion of separation results in the decrease of analytical accuracy. Generally, spectrophotometry is used for determining these drugs and a prior separation is always involved, for there is a serious spectral overlap . The chemometric techniques are based on a solid mathematical and statistical background. Key words: Principle component regression (PCR), Partial least squares (PLS), Chemometry.
387
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Kırsal Yoksulluk ve Sürdürülebilir Kırsal Kalkınma Politikaları Hacer ÇELİK ATEŞ1,* Süleyman Demirel Üniversitesi, Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected]
1
Özet Ülkelerin hemen hepsinde kırsal yoksulluk kentsel yoksulluktan daha yaygın olarak yaşanan bir sorundur. Bu bağlamda, yoksullukla mücadeleye yönelik hem ulusal hem de uluslararası düzeyde politika ve stratejiler belirlenmekte ve uygulanmaktadır. Bu çalışmanın amacı sürdürülebilir kırsal kalkınma politikalarının yoksulluğu azaltmadaki veya artırmadaki etkisini ve rolünü incelemektir. Çalışma, bu konularda daha önce yapılmış araştırma, inceleme ve raporların sonuçlarına dayanmaktadır. Kırsal kalkınma politikaları ve yaklaşımları konusunda bilgi verilerek, bu politikaların beklenen amacı ne kadar karşıladığı veya sonuçları üzerine bir değerlendirme yapılacak ve yoksulluk ile ilişkileri ortaya konulacaktır. Türkiye’de yoksulluğun önlenmesinde sosyal transferler politikası uygulanmaktadır. Ancak, Türkiye’deki sosyal transferlerin yoksulluk riskindeki nüfusa etkisi incelendiğinde ise, uygulanan politikaların pek de etkili olamadığı sonucuna varılmaktadır. Çeşitli kriterlere göre veriler incelendiğinde yine kırsal kesimde ve tarım sektöründe yoksulluğun daha yüksek olduğu ve zaman içindeki değişimlerin de çok düşük düzeylerde olduğu ortaya çıkmaktadır. Gelişmekte olan ülkelerde yoksulluğun azaltılması ve önlenmesine ilişkin alınacak önlemler ve izlenecek politikalar gerek kalkınmanın sürekliliğini sağlamada gerekse ekonomik büyümede önemlidir. Yoksulluk ise en fazla kırsalı etkilemektedir. Bu nedenlerle bu alana yönelik etkili politikalar üretilmelidir. Yoksullukla mücadele ve kırsal kalkınma politikalarının oluşturulmasında, sürdürülebilir bir anlayış ve bütüncül bir yaklaşımla hedefler belirlenmelidir. Politika yapıcılar bu konularda kararlar alırken, politikaların ekoloji, ekonomi ve sosyal alanlar üzerindeki etkilerini birlikte değerlendirmelidirler. Anahtar kelimeler: Yoksulluk; kırsal; sürdürülebilirlik; kırsal kalkınma.
388
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Rural Poverty and Sustainable Rural Development Policies Hacer CELIK ATES1, * 1
Suleyman Demirel University, Isparta, Turkey *Responsible author e-mail:
[email protected]
Abstract In almost all countries, rural poverty is a more common concern than urban poverty, and policies and strategies for poverty alleviation are determined and implemented at both national and international level. The purpose of this study is to examine the impact and role of sustainable rural development policies on the level of poverty. The study is based on the results of previous research, reviews, and reports on the topic. Information about rural development policies and various approaches is provided, their success in terms of meeting expectations is evaluated, and the consequences of implementing policies regarding poverty will be assessed. A social transfer (welfare benefits) policy is implemented in Turkey to prevent poverty. However, when the impact of the social transfers on the population at risk of poverty is analyzed, it is concluded that this policy has not been very effective. Analyzing the available data by various criteria, it is found that the poverty remains higher in the rural and agricultural sectors, and the improvements over time also remain at very low levels. Actions need to be taken to reduce and prevent poverty in developing countries by following appropriate policies. This is important both for economic growth and sustainable development. Poverty affects rural people the most. Together, these reasons demand development of effective policies for rural areas. Targets areas should be identified with sustainability in mind and with a comprehensive approach to combat poverty and foster rural development. When making decisions on these issues, the policy makers should assess the collective impacts of policies on ecology, economy, and social issues. Key words: Poverty; rural; sustainability; rural development.
389
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Air Pollution in Foundries in the Cupola Ali HADJI1,*, Med Tayeb ABEDGHERS1 1
Foundry Laboratory, Faculty ofEngineering Sciences, BADJI Mokhtar University BP 12 23000 AnnabaALGERIA * Responsible author e-mail:
[email protected]
Abstract The WHO Air Quality Guidelines is the most widely recognized and up-to-date assessment of the effects air pollution on health. The recommended limit concentrations have been revised for a number of pollutants such as suspended particulates, ozone (O3), nitrogen dioxide (NO2), sulfur dioxide (SO2) and VOCs. Pollutant measurements with passive samplers (passam: NOx, SO2) and decantation dust recovery devices. The results show that sulfur dioxide and nitrogen oxide concentrations are too high when compared to the WHO limit values. For sulfur dioxide, it is 508.2 μg / m3 compared to 125 μg / m3 and for nitrogen oxides 722.4 μg / m3 against 150 μg / m3. High levels of sulfur dioxide (SO2) are related to uncontrolled additions of coke to the feedstock (coolingcupola). In cast iron, it is imperative to use a low-sulfur fuel, to enrich the oxygen in the combustion process while decreasing the air / fuel ratio. Key words: Cast iron foundry, gaseous pollutant, atmosphere, dust, values WHO.
390
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Effect Of Manganese, Nickel, Molybdenum and Vanadiumon of Mechanical Behavior of Austempered Ductile Iron A. HADJI1,*, M. I. BOULIFA1 1
FoundryLaboratory, Faculty ofEngineering Sciences, BADJIMokhtar University23000Annaba-ALGERIA. * Responsible author e-mail:
[email protected]
Abstract The effect of different alloying elements on the formation of ausferrite in a ductile iron austinitised at 850°C and austempered at 550 °C has investigated in the present study. The elaboration of the ductile iron for the ADI is prepared in an induction furnace. To have the form of spheroidal graphite, an inoculation with a ferro-silicon-magnesium waseffected. The last is allied with Mn, Ni Mo, Crand V. Optical microscopy, SEM, XRD, tensile properties, hardness, microhardness, wear and resilience are a structural and mechanical craterisations applied on the samples of this cast iron. Compared to unalloyed cast iron an increase in the proprieties of alloyed cast iron is noticed. Key words: Austempered ductile iron, bainitic ferrite, ausferrite, bainite, alloying elements.
391
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Çevresel Kuznets Eğrisi Hipotezinin G7 Ülkeleri Kapsamında Araştırılması: İleri Panel Veri Analizi Hakan BOZDAĞ1,*, Mehmet MERT2 1
Süleyman Demirel Üniversitesi, İİBF, Ekonometri Bölümü, Isparta, Türkiye 2 Akdeniz Üniversitesi, İİBF, Ekonometri Bölümü, Antalya Türkiye * Sorumlu yazar e-posta:
[email protected]
Özet Çalışmanın amacı, 1980-2014 yılları arasında G7 ülkeleri için Çevresel Kuznets Eğrisi hipotezinin geçerliliğini incelemektir. Bu amaçla G7 ülkeleri için karbon dioksit emisyon seviyesi (CO2), reel gelir (GDP), reel gelirin karesi (GDPS), yenilenebilir enerji (RE), fosil enerji (FE) ve uluslararası ticaret (TR) değişkenleri kullanılarak çok değişkenli panel veri modeli oluşturulmuştur. Modelde yer alan tüm serilerde yatay kesit bağımlılığı tespit edildiği için durağanlık analizleri Pesaran (2006) tarafından geliştirilen yatay kesit bağımlılığını dikkate alan CADF birim kök testi ile incelenmiştir. Tüm seriler 1 dereceden durağan oldukları belirlenmiş (I(1)), eşbütünleşme ilişkisinin varlığı yatay kesit bağımlılığını dikkate alan LM bootsrap panel eşbütünleşme testi ile incelenmiştir. LM bootstrap eşbütünleşme testi, CO2 emisyonlarının, yenilenebilir enerji, fosil enerji, reel gelir, reel gelirin karesi ve uluslararası ticaret değişkenlerinin eşbütünleşik olduğunu yani uzun dönem bir ilişkinin varlığını göstermektedir. Seriler arasındaki nedensellik ilişkisi yatay kesit bağımlılığını dikkate alan Dumitrescue Hurlin panel nedensellik testi ile nedensellik ilişkisi ve ilişkinin yönü belirlenmiştir. Nedensellik analizi sonuçlarına göre, yenilenebilir enerji ve CO2 emisyonları arasında çift yönlü Granger nedenselliğinin varlığını ve CO2 emisyonlarından fosil enerji ve ticaretten CO2 emisyona, GSYİH'dan CO2 emisyonuna ve GSYİH'dan fossil enerjiye uzanan tek yönlü bir nedensellik ilişkisi olduğunu ortaya koymaktadır. Ayrıca seriler arasında eşbütünleşme ilişkisine ait uzun dönem ülkelere ait eşbütünleşme katsayıları; Pesaran (2006) tarafından geliştirilen ve yatay kesit bağımlılığını göz önünde bulunduran CCE ile tahmincisi kullanılarak tahmin edilmiştir. Anahtar kelimeler: ÇKE, Yatay Kesit Bağımlılığı, Panel Veri Analizi.
392
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Investigation of the Environmental Kuznets Curve Hypothesis in the G7 Countries: Advanced Panel Data Analysis Hakan BOZDAĞ1,*, Mehmet MERT2 1
Suleyman Demirel University, Faculty of Economics and Administrative Sciences, Department of Econometrics, Isparta Turkey 2 Akdeniz University, Faculty of Economics and Administrative Sciences, Department of Econometrics, Antalya Turkey * Responsible author e-mail:
[email protected]
Abstract The aim of the study is to examine the validity of the Environmental Kuznets Curve hypothesis for the G7 countries between 1980 and 2014. For this purpose, a multivariate panel data model was developed using variables of carbon emission level (CO2), real income (GDP), real income square (GDP), renewable energy (RE), fossil energy (FE) and international trade (TR) for the G7 countries. As the cross section dependency was determined in all the series in the model, stationarity analysis was examined by CADF unit root test developed by Pesaran (2006) that is considering cross-section dependence. Since all series are stationary at 1 degree (I (1)), the existence of the cointegration relationship is examined by the LM bootsrap panel cointegration test, which takes into account the cross section dependency. The LM bootstrap cointegration test shows that CO2 emissions are cointegrating with renewable and fossil energy, GDP, GDP2 and trade, and thus a longstanding relationship. Dumitrescue Hurlin panel causality test, which takes into account the cross section dependency of the causality relation between the series, determines the causality relation and between series. According to the results of the causality analysis, it reveals the existence of bi-directional Granger causality between renewable energy and CO2 emissions and a one-way causality relationship from CO2 emissions to fossil energy and trade CO2 emissions, GDP CO2 emissions and GDP to fossil energy. Furthermore, the cointegration coefficients of the long term countries related to the cointegration relation between the series; It was estimated by using Predictor CCE, developed by Pesaran (2006) and considering horizontal section dependency. Key words: EKC, Cross Section Dependence, Advanced Panel Data.
393
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Finansal Gelişme, Uluslararası Ticaret Ve Enerji Tüketiminin Ekonomik Büyüme Üzerindeki Etkilerinin Araştırılması: Türkiye Örneği Hakan BOZDAĞ1,*, Erdoğan ÖZTÜRK2 1 Süleyman Demirel Üniversitesi, İİBF, Ekonometri Bölümü, Isparta, Türkiye Karabük Üniversitesi, Demirçelik Kampüsü, İşletme Fakültesi, Aktüerya ve Risk Yönetimi Bölümü, Karabük, Türkiye * Sorumlu yazar e-posta:
[email protected]
2
Özet Bu çalışmada 1980-2015 dönemi için Türkiye’ ye ait kişi başına GSYİH, kişi başına enerji tüketimi, kişi başına finansal krediler ve kişi başına ticari açıklık değişkenlerinden yararlanarak ekonomik büyüme ile enerji tüketimi, finansal krediler ve ticarete açıklık değişkenleri arasındaki ilişkilerin çok değişkenli model kullanılarak araştırılmasıdır. Öncelikle ADF (Augmented Dickey-Fuller) birim kök testiyle durağanlık analizi yapılarak serilerin birinci farklarında yani I(1) seviyesinde durağan oldukları belirlenmiştir. Daha sonra seriler kullanılarak VAR modeli oluşturulmuş ve bu model yardımı ile etki tepki analizleri elde edilmiştir. VAR modelinden Johansen eşbütünleşme tesine geçilmiş ve serilerin uzun dönemde eşbütünlesik oldukları tespit edilmiştir. VECM hata düzelme mekanizması yardımıyla Granger nedensellik testi uygulanmıştır. VECM nedensellik testi sonuçlarına göre finansal kredi değişkeninden ekonomik büyümeye doğru tek yönlü nedensellik ilişkisi belirlenmiştir. Benzer şekilde ekonomik büyüme ve finansal kredi değişkenlerinden enerji tüketimine doğru tek yönlü nedensellik ilişkisi belirlenmiştir. Elde edilen sonuçlara göre ekonomik büyümenin finansal gelişmelerden etkilendiği, benzer şekilde enerji tüketiminin de ekonomik büyüme ve finansal kredilerden etkilendiği sonucuna varılmıştır. Finansal kredilerdeki artışın ekonomik büyümeyi ve enerji tüketimini artırdığı, ekonomik büyümedeki artışında enerji tüketimini artıracağı sonucuna varılabilir. Anahtar kelimeler: Enerji Tüketimi, Finansal Gelişme, Sabit Sermaye Yatırımları, Dış Ticaret, Ekonomik Büyüme.
394
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Investıgatıon On The Effects Of Fınancıal Development, Foreign direct investment Energy Consumptıon And Internatıonal Trade On Economıc Growth: The Case Of Turkey Hakan BOZDAĞ1,*, Erdoğan ÖZTÜRK2 1
Suleyman Demirel University, Faculty of Economics and Administrative Sciences, Department of Econometrics, Isparta, Turkey 2 Karabük University, Demirçelik Campus, Faculty of Business Administration, Actuarial and Risk Management Department, Karabük, Turkey * Responsible author e-mail:
[email protected]
Abstract Purpose of this study, to investigate the relation between economic growth and energy consumption, by using the multivariate model, taking into account the per capita GDP per capita, per capita energy consumption, per capita financial lending and per capita trade openness for the period 1980-2015. Firstly, it was determined that the series are stable at first differences I (1) level by performing stationarity analysis with ADF (Augmented Dickey-Fuller) unit root test. Then VAR model was constructed by using series and impulse response analyzes were obtained with the help of this model. Johansen cointegration test was passed from the VAR model and it was found that the series were long-term co-integration. Granger causality test was applied with the help of VECM error recovery mechanism. According to the results of the VECM causality test, one-way causality relation from financial credits variable to economic growth was determined. Similarly, the one-way causality relationship from economic growth and financial credit variables towards energy consumption has been determined. The results show that economic growth is influenced by financial developments, and similarly energy consumption is affected by economic growth and financial credits. According to these results it can be achieved that the increase in financial development result in increasing economic growth and increasing energy consumption, increase in economic growth is causing the increase energy consumption. Key words: Energy Consumption, Financial Development, Fixed Capital Investments, Foreign Trade, Economic Growth.
395
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Toplumsal Kalkınma Açısından Türkiye'deki Sosyal ve Ekonomik Destek (SED) Hizmetinin Değerlendirilmesi Hakan SAKARYA1,*, Mustafa Çağrı AYALP2 1
Manisa Celal Bayar Üniversitesi, Sosyal Hizmet Bölümü, Manisa, Türkiye 2 Hacettepe Üniversitesi, Sosyal Hizmet Bölümü, Ankara, Türkiye *Sorumlu yazar e-posta:
[email protected]
Özet Toplumsal kalkınma, temelinde insani gelişimi barındıran ve sosyal, kültürel, ekolojik ve ekonomik bileşenleri olan bir kavramdır. Etkili bir toplumsal kalkınmanın sağlanması için her bir bileşenin ayrı önemi bulunmakla birlikte temel amaç insanların güçlenmelerini ve gelişmelerini sağlamaktır. Toplumsal kalkınma, bileşenlerinden ayrı düşünülemeyeceği gibi toplumun hiçbir grubundan da ayrı düşünülemez. Özellikle dezavantajlı grupların kalkınmasının sağlanması, sosyal sorunların kuşaklararası iletim yoluyla süreğen bir hale gelmesine engel olunması açısından önemlidir. Bu bağlamda, insanların iyilik halinin sağlanması ve geliştirilmesi amacıyla uygulama gerçekleştiren sosyal hizmetin dezavantajlı gruplara yönelik geliştirdiği hizmet modelleri toplumsal kalkınmaya katkı sağlamaktadır. Bu modellerden biri olan Sosyal ve Ekonomik Destek (SED) Hizmeti, Aile ve Sosyal Politikalar Bakanlığı (ASPB) tarafından sunulmaktadır. SED hizmetinin temel amacı, yoksulluk nedeniyle temel ihtiyaçlarını karşılayamayan ve hayatını sürdürmekte güçlük yaşayan çocuk ve gençlerin gelişmelerini ailelerini destekleme yoluyla sağlamaktır. Bu hizmet sürekli bir yardım olmamakla birlikte aile bireylerinin ailenin ekonomik koşullarını iyileştirme çabası sırasında çocukların ekonomik yoksunluktan zarar görmemeleri ve gelişimlerini sürdürebilmeleri amacıyla sağlanmaktadır. ASPB 2016 Faaliyet Raporu'na göre, 137.415 çocuk 2016 yılında geçici ya da süreli olarak SED hizmetinden yararlanmış ve 623.714.806 TL ödenek kullanılmıştır (ASPB, 2017). SED hizmetinin etkili şekilde uygulanması yalnızca yoksulluğun aileden çocuğa aktarılmasına engel olma çabasını değil, aynı zamanda çocuğun ve ailesinin sosyal yönden gelişiminin desteklemesini de içermektedir. Bu çerçevede, SED hizmeti bireylerin güçlendirilmesini ve iyilik hallerinin arttırılmasını sağlamakla birlikte sosyal refahın gelişimine katkıda bulunarak toplumsal kalkınma sürecinde aktif bir rol oynamaktadır. Anahtar kelimeler: Toplumsal kalkınma, yoksulluk, sosyal ve ekonomik destek, sosyal hizmet.
396
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Evaluation of Social and Economic Support Service in Turkey in terms of Community Development Hakan SAKARYA1,*, Mustafa Çağrı AYALP 2 1
Manisa Celal Bayar University, Department of Social Work, Manisa, Turkey 2 Hacettepe University, Department of Social Work, Ankara, Turkey *Responsible author e-mail:
[email protected]
Abstract Community development is a concept that has components such as social, cultural, ecological and economic, which are based on human development. In order to achieve an effective community development, each component has its own main importance, while the main purpose is to make people stronger and better. Community development can not be considered separately from its components, nor it can be thought apart from any group of society. Ensuring the development of disadvantaged groups in particular is important in terms of preventing social problems from becoming persistent through intergenerational transmission. In this context, the service models developed for the disadvantaged groups of social work that implement the practice for the provision and improvement of people's well-being contribute to community development. One of these models, the Social and Economic Support (SED) Service is served by the Ministry of Family and Social Policies (ASPB), The main objective of the SED service is to provide support to the families of children and young people which are unable to meet their basic needs due to poverty and have difficulties in maintaining their lives. This service provides help to family members during the effort to improve the economic conditions of the family to ensure that children are not hurt by economic deprivation and can continue their development; however it is not a continuous aid. According to ASPB Activity Report 2016, 137.415 children benefited from SED services temporarily and periodically in 2016 and 623.714.806 TL allocation was used (ASPB, 2017). The effective implementation of the SED service not only include the effort to prevent the transfer of poverty from the family to the child but also supports the social development of the child and his / her family at the same time. In this framework, the SED service strengthening the individuals and improving their well-being as well as contributing to the development of social welfare by having an active role in the community development process. Key words: Community development, poverty, social and economic support, social work.
397
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Analytical Methods For The Determination Of Acrylamide In Food And Water Samples: Sample Preparation-Mass Spectrometry Hale SEÇİLMİŞ CANBAY1,* 1
Department of Bioengineering, Faculty of Engineering and Architecture, Mehmet Akif Ersoy University, Burdur, Turkey *Responsible author e-mail:
[email protected]
Abstract Acrylamide (2-propenamide) is a low water soluble compound (215 g/100 mL at 30C) and moleculer weight (MW) 71 g/mol. Acrylamide exists as both a monomer and a polymer form and is used primarily for the formation of polyacrylamide and its copolymers. Polyacrylamide is mainly used for a flocculent in wastewater treatment, drinking water treatment, ore and sand mining, construction, and the cosmetics industry. Acrylamide also primarily products during the cooking (caulking, food packaging, some adhesives, potatoes, bread, biscuits) of foods through reactions between amino acids. Acrylamide has been an option of classified by the InternationalAgency for Research on Cancer (IARC) as probably carcinogenic to humans (group 2A) in 1994. A wide range of sensitive analytical techniques has been improved to detect Acrylamide at trace levels in food and water samples. Most of these procedures are electrochemical methods electrophoresis, chemiluminescence, liquid chromatography, high-performance TLC, LC–MS, ion-exclusion chromatography coupled to MS, gas chromatography, and GC–MS. GC and GCMS methods for the determination of Acrylamide in food and water samples required derivatization/ derivatization without and liquid–liquid extraction before analysis. Key words: Acrylamide (2-propenamide), sample preparation, mass spectrometry.
398
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Rapid Determination of Ionization Constants (pKa) of Amlodipine by UV -Spectroscopy Using 96-Well Microtiter Plates Hale SEÇİLMİŞ CANBAY1,*, Mahmut DOĞANTÜRK2 1
Department of Bioengineering, Faculty of Engineering and Architecture, Mehmet Akif Ersoy University, Burdur, Turkey 2 Research and Practice Center, Mehmet Akif Ersoy University, Burdur, Turkey *Responsible author e-mail:
[email protected]
Abstract Hypertension is one of the important threat for kidney, stroke and various cardiovascular diseases. Hypertension is treated by regulating blood pressure and electrolyte balance. Different experimental procedures are frequently used for determination of an ionization constants. For example, chromatography, capillary electrophoresis, liquidliquid partition, potentiometriy and spectroscopy are useful techniques for the determination of ionization constants values, due to their good accuracy and reproducibility. In this study, dissociation constant values of Amlodipine in 0.10, 0.20, and 0.40 volume fraction MeCN + water binary mixtures by multi-wavelength spectrometric method. The spectral data obtained at different pH values were treated using the program STAR (stability constants by absorbance readings). The absorption spectra of Amlodipine at varius pH values at 190-400 nm were recorded. Aqueous pKa values obtained by using the Yasuda-Shedlovsky extrapolation and Kamlet and Taft equation. The ionization constants of amlodipine is about 8.6 at 25 °C in water. Key words : Hypertension, Amlodipine, pKa.
399
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Amlodipinin İyonizasyon Sabitlerinin (pKa) UV-Spektroskopi 96well Microtiter Plate ile Hızlı Belirlenmesi Hale SEÇİLMİŞ CANBAY1,*, Mahmut DOĞANTÜRK2 Biyomühendislik, Mühendislik-Mimarlık Fakültesi, Mehmet Akif Ersoy Üniversitesi, Burdur, Türkiye 2 Araştırma Merkezi, Mehmet Akif Ersoy Üniversitesi, Burdur, Türkiye *Sorumlu yazar e-posta:
[email protected]
1
Özet
Hipertansiyon, böbrek, inme ve çeşitli kardiyovasküler hastalıklar için önemli tehdittir. Hipertansiyon, kan basıncını ve elektrolit dengesini düzenleyerek tedavi edilmektedir. İyonizasyon sabitlerinin tayini için, kromatografi, kapiler elektroforez, sıvı-sıvı dağılması, potansiyometri ve spektroskopi gibi teknikler kullanılmaktadır. Doğruluk ve tekrarlanabilirlik özelliklerinden dolayı bu teknikler iyonizasyon sabit değerlerinin saptanması için yararlı tekniklerdir. Bu çalışmada, 0.10, 0.20 ve 0.40 hacim fraksiyonunda MeCN + su ikili karışımlarında Amlodipinin iyonlaşma sabiti değerleri saptanmıştır. Farklı pH değerlerinde elde edilen spektral veriler, STAR programı kullanılarak, bileşiğin pKa değerleri tespit edilmiştir. Amlodipinin farklı pH’larda 190-400 nm'de absorpsiyon spektrumları kaydedilmiştir. Yasuda-Shedlovsky ekstrapolasyon ve Kamlet ve Taft denklemi kullanılarak su ortamına ait pKa değerleri belirlenmiştir. Amlodipinin iyonizasyon sabitleri sudaki 25 ° C'de yaklaşık 8.6'dır. Anahtar kelimeler: Hipertansiyon, Amplodipine, pKa.
400
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Kalite Fonksiyonu Yayılımı ve Atıksu Arıtma Tesislerinde Üretilen Biyogazın Niteliklerinin İyileştirilmesi İçin Uygulanması Halil AKBAŞ1,*, Bilge BİLGEN 2 Süleyman Demirel Üniversitesi, Fen Bilimleri Enstitüsü, Endüstri Mühendisliği Bölümü,32260,Isparta, Türkiye 2 Dokuz Eylül Üniversitesi, Mühendislik Fakültesi, Endüstri Mühendisliği Bölümü, 35397, Izmir, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
Özet Kalite fonksiyonu yayılımı (KFY), müşteri memnuniyetini artırmak için ürün geliştirilmesinin her aşamasında müşteri gereksinimlerinin mühendislik niteliklerine dönüştürülmesini sağlayan bütünsel bir yaklaşımdır. Geleneksel KFY metodu belirsizlik altında hatalı çözümler verebilmektedir. İnsan yargılarındaki değişkenlik KFY analizlerinin sonuçlarının tutarsız olmasına yol açmaktadır. Müşteri gereksinimleri insan düşüncelerinin belirsizliği nedeniyle mühendislik niteliklerine yanlış çevrilebilmektedir. Müşteri gereksinimlerinin önem ağırlıklarının ve mühendislik niteliklerinin önem değerlerinin hesaplanması için geleneksel KFY metodu, bulanık mantık teorisi, derece analizi ile birlikte bulanık analitik hiyerarşi proses (BAHP) metodu ve üçgensel bulanık sayılar kullanılarak desteklenebilir. Bu metotlar makale içerisinde bir yenilenebilir enerji üretim sistemi uygulamasında kullanılmaktadır. Bir atıksu arıtma tesisindeki biyogaz ürün geliştirme problemi için müşteri gereksinimleri ile mühendislik nitelikleri arasındaki ilişkileri analiz etmek amacıyla bir KFY yaklaşımı sunulmaktadır. Mühendislik ekibi tarafından saflık, içerik istikrarı, uygun fiyat, enerji verimliliği ve güvenilirlik temel nitelikler olarak seçilmektedir. Müşteri gereksinimlerini hiyerarşik olarak göstermek için bir ağaç diyagramı çizilir. Derece analizi ile birlikte bulanık BAHP yaklaşımı kullanarak Müşteri gereksinimleri için önem ağırlıkları hesaplanır. Böylece müşteri gereksinimlerinin önem değerleri de daha kesin olarak belirlenir. Analiz sonuçlarına göre saflık bulanık derece analizi ile hesaplanan en yüksek önem ağırlığı ile en önemli Müşteri gereksinimleri olarak bulunmuştur. Diğer taraftan, mühendislik niteliklerine en yüksek önem değerleri göz önüne alınarak, gerek duyulan mühendislik nitelikleri enerji fazı için saflaştırılmış biyogaz, alt yapı gerekliliği için boru hattı sistemi ve işlem gerekliliği için kimyasal çözelti olarak seçilmiştir. Anahtar kelimeler: Kalite Fonksiyonu Yayılımı, BAHP, Bulanık Derece Analizi.
401
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Quaity Function Deployment And An Its Application To Improve The Characteristics Of Biogas Produced At Wastewater Treatment Plants Halil AKBAŞ1,*, Bilge BİLGEN 2 Süleyman Demirel University, The Graduate School of Natural and Applied Sciences, Department of Industrial Engineering, 32260, Isparta, Turkey 2 Dokuz Eylül University, Faculty of Engineering, Department of Industrial Engineering, 35397, Izmir, Turkey *Responsible author e-mail:
[email protected] 1
Abstract Quality function deployment (QFD) is a holistic approach, which translates customer requirements into engineering characteristics for each stage of the product development to increase customer satisfaction. Traditional QFD method can provide false solutions under uncertainty. The variability of the human judgment leads to inconsistent results of the QFD analyses. The customer requirements can be mistranslated into the engineering characteristics owing to the vagueness of human thoughts. The traditional QFD method can be supported with the use of fuzzy logic theory, fuzzy analytic hierarchy process (FAHP) with extent analysis approach and triangular fuzzy numbers to calculate the importance weights of customer requirements and importance values of engineering characteristics. These methods are used for an application in renewable energy production system. A QFD approach to analyse the relationships between customer requirements and engineering characteristics for the biogas product development problem at a wastewater treatment facility is presented. Purity, stability of content, affordability, energy efficiency and reliability are chosen as the main attributes by the engineering team. A tree diagram is drawn to show the hierarchy of customer requirements. The importance weights of the customer requirements are calculated by using FAHP with extent analysis approach. Thus, the importance values of engineering characteristics are also determined more precisely. Respecting to the analyses results, purity is found out as the most important customer requirement with the highest importance weight calculated by using fuzzy extent analysis. On the other hand, the required engineering characteristics are selected as purified biogas for the energy phase, pipe line system for infrastructure requirement and chemical solution for process requirement by considering the highest importance values of engineering characteristics. Key words: Quality Function Deployment, FAHP, Fuzzy Extent Analysis.
402
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Bir Bütünleşik Çok Ölçütlü Karar Modeli Ve Atıksu Arıtma Tesislerindeki Gaz Yakıtların Önem Sıralamasının Belirlenmesi Halil AKBAŞ1,*, Bilge BİLGEN 2 Süleyman Demirel Üniversitesi, Fen Bilimleri Enstitüsü, Endüstri Mühendisliği Bölümü,32260,Isparta, Türkiye 2 Dokuz Eylül Üniversitesi, Mühendislik Fakültesi, Endüstri Mühendisliği Bölümü, 35397, Izmir, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
Özet Yenilenebilir enerji kaynakları dünyadaki nüfus artışı, sanayideki gelişmeler, çevresel sorunlar ve enerji tüketiminin sürekliliği ile enerji sektöründe çok daha önemli bir konuma sahiptir. Bu makale atıksu arıtma tesisleri (AAT)’nde enerji verimliliği, enerji tasarrufu ve sürdürülebilirliğin sağlanması için çok ölçütlü karar modeli ileri sümektedir. Önerilen karar modeli bulanık kalite fonksiyonu yayılımı yapısı ve TOPSIS yöntemi seçme algoritmasının bütünleşik uygulamasını içermektedir. Bulanık analitik hiyerarşi proses (BAHP), insan yargılarındaki değişkenlik nedeniyle geleneksel kalite fonksiyonu yayılımı (KFY)’ndan kaynaklanacak tutarsız sonuçları önlemek için, çok ölçütlü karar modelindeki karar ölçütlerinin önem ağırlıklarının belirlenmesinde kullanılır. Bulanık analitik ağ proses (BANP) kalite evindeki içsel ve dışsal ilgileşim matrislerinin oluşturulması için müşteri gereksinimleri ile teknik gereklilikler arasındaki hem simetrik hem de asimetrik ilişkilerin göz önüne alınması için kullanılır. Teknik gerekliliklerin kapsamlı ağırlık vektörü bütünleşmiş yöntemin TOPSIS kısmındaki seçme ölçütlerinin ağırlıkları olarak kullanılır. Ortaya koyulan çok ölçütlü karar modeli Türkiye’deki bir AAT’de enerji kaynağı olarak kullanılan yenilenebilir ve fosil gaz yakıtlarının önem sırasının belirlenmesi için kullanılmaktadır. Bu modelin uygulanmasıyla bir AAT’deki enerji kaynaklarının verimli kullanılmasına katkı sağlanması amaçlanmaktadır. Çok ölçütlü karar modeli uygulanması neticesinde en önemli teknik gereklilik 0.32 ağırlık değeriyle hidrokarbonlardır, buna karşın gaz işleme sistemi 0.21 ağırlık değeriyle ikinci ve saf olmayan bileşenler ise 0.19 ağırlık değeriyle üçüncüdür. Türkiye’deki bir AAT’de gaz yakıtlar önem derecesine göre biyogaz, doğalgaz, sıvılaştırılmış doğalgaz, sıkıştırılmış doğalgaz ve çöp gazı olarak sıralanmıştır. Anahtar kelimeler: Kalite Fonksiyonu Yayılımı, BAHP, BANP, TOPSIS, Biyogaz.
403
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
An Integrated Multi-Criteria Decision Model and The Determination Of Order Of Importance Of Gas Fuels At Wastewater Treatment Plants Halil AKBAŞ1,*, Bilge BİLGEN 2 Süleyman Demirel University, The Graduate School of Natural and Applied Sciences, Department of Industrial Engineering, Isparta, Turkey 2 Dokuz Eylül University, Faculty of Engineering, Department of Industrial Engineering, Izmir, Turkey *Responsible author e-mail:
[email protected] 1
Abstract Renewable energy resources have more crucial state in the energy sector with the ongoing increase of population, development of industry, environmental problems and continuous energy consumption in the world. This paper puts forward a multiple criteria decision making (MCDM) model in order to maintain energy efficiency, energy saving and sustainable operations at wastewater treatment plants (WWTPs). The proposed MCDM model contains the integration of fuzzy quality function deployment (FQFD) framework and technique for order preferences by similarity to an ideal solution (TOPSIS) selection algorithm. Fuzzy analytic hierarchy process (FAHP) is used to determine importance weights of attributes in MCDM model to avoid inconsistent results of traditional QFD analyses caused by the variability of human judgment. Fuzzy analytical network process (FANP) is used to consider both symmetrical and asymmetrical relationships between customer requirements and engineering characteristics for constituting internal and external correlation matrices in the house of quality (HOQ). The comprehensive weight vector of engineering characteristics is used as the weights of the selection criteria in the TOPSIS side of the integrated methodology. Revealed MCDM is used to determine the order of importance of renewable and fossil gas fuels at a WWTP in Turkey. The aim of proposed MCDM is to contribute to the efficient use of energy resources at WWTPs. The results of the MCDM results in that the most important engineering characteristic is hydrocarbons with the weight of 0.32, while gas processing system is the second with the weight of 0.21 and impurities is the third with the weight of 0.19. By considering the order of importance, gas fuels are arranged in the turn of biogas, natural gas, liquefied natural gas, compressed natural gas and landfill gas at the WWTP in Turkey. Key words: Quality Function Deployment, FAHP, FANP, TOPSIS, Biogas.
404
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sustainability in Chemical Engineering Hamid MORTAZAVI1,*, Najmeh BASHIRI 2 1
Tarbiat Modares University,Tehran,Iran Tarbiat Modares University,Tehran,Iran *Responsible author e-mail:
[email protected] 2
Abstract The development of industrial technology has enabled the transformation of the environment in different ways, changing the nature and extent of the environmental impacts of industrial activities. Resource depletion, air, water and land pollution, are the examples of the environmental problems which have emerged as a result of intensified interventions into the environment. One of the main issues associated with these activities is that they may not have an immediate effect and some may have more global impact on the environment. Therefore, we should consider next generations life quality in our industrial activities. Sustainability or sustainable development is development which meets the needs of the present without compromising the ability of future generations to meet their own needs. In most of the cases, environmental sustainability is the predominant approach to sustainable development for industrialised countries. However, a broader interpretation took over, which relates sustainable development to the fields of society, economy and environment. In this study, we will introduce methods in order to evaluate sustainability, metrics in order to quantify it and different ways of using metrics in literature. Furthermore, we will discuss different fields of sustainability in chemical engineering and will have a detailed look on the categories which are more related to our background. Key words: Sustainability, Environment, Metric, Chemical Engineering.
405
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Halk Eğitimi Merkezleri ve Kadın Yetişkinler Handan ŞEKER1,* H. Eylem KAYA2 Süleyman Demirel Üniversitesi Sosyoloji Bölümü, Isparta, Türkiye Süleyman Demirel Üniversitesi Sosyoloji Bölümü, Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected]
1 2
Özet
Eğitim, özellikle de “kadın yetişkinlerin eğitimi” olgusu, dünyanın birçok ülkesinde olduğu gibi Türkiye’de de önemli bir sorunsalı temsil etmekte ve sürekli tartışma konusu olmaktadır. Konuyla ilgili zaman zaman farklı çözüm önerileri getirilmeye çalışılsa da, sorunun çözümüne yönelik arayışlarda radikal bir dönüt alınamamakta; hatta gün ve gün kendini güncelleyerek daha da içinden çıkılamaz bir hal almaktadır. Eğitim; bir yandan bireylere çağın kabul gördüğü kültürü ve bilgiyi aktarma, işgücüne katılım için gerekli bilgi ve becerileri kazandırmada, diğer yandan da ekonomik ve toplumsal kalkınmanın gerçekleşmesinde araç olarak görülmesi yönüyle kişiselin yanı sıra toplumsal gelişimin ve dönüşümün sağlanmasında merkezi bir öneme sahiptir. Ancak bu işlevlerinin ötesinde eğitimin, özellikle de ‘kadın yetişkinlerin eğitimi’ olgusunun, toplumsal cinsiyet içerikli iletiler taşıdığını, kurumlarının da kadın ve erkek rollerine, meslek tercihlerine, katıldıkları kurs türlerine vb. dinamiklere yönelik toplumsal kalıpyargıların aktarılmasında ve cinsiyete dayalı eşitsizliklerin yeniden üretilmesinde etkili olduğunu söylemek mümkündür. Toplumsal cinsiyete dayalı bu ileti ve etkilerin eğitimin önemli bir parçası olan yetişkin eğitimi ve en yaygın hizmet kurumu olan Halk Eğitimi Merkezleri için de geçerli olması kaçınılmazdır. Bu çalışmada, ‘günümüzde Halk Eğitimi Merkezleri’nin yanı sıra bu kurumlar dahilinde olan yöneticiler, eğitmenler ve yetişkin kursiyerlerin toplumsal cinsiyet açısından değerlendirilmesiyle ortaya çıkan sonuçların Türkiye’deki yetişkin kadın eğitimi sorunsalı temelinde ne anlama geldiği’ sorunu sosyolojik bir perspektifle sorgulanmaya çalışılmıştır. Anahtar kelimeler: Eğitim ve Kadın Yetişkinlerin Eğitimi, Toplumsal Cinsiyete Dayalı Dinamikler, Kalıpyargılar ve Eşitsizlikler, Halk Eğitimi Merkezleri.
406
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Multimoora Yöntemi İle Tehlikeli Atık Miktarı Açısından İllerin Değerlendirilmesi Hande EREN1,*, Nuri ÖMÜRBEK2 Süleyman Demirel Üniversitesi, Isparta, Türkiye Süleyman Demirel Üniversitesi, Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected]
1 2
Özet Ülkemizde ve dünyada, özellikle büyük şehirlerde sağlıksız bir şekilde gelişen sanayileşme, hızlı nüfus artışı ve kentleşme, çevre sorunlarının da artmasına neden olmaktadır. Kentleşme ve sanayileşme sonucunda oluşan tehlikeli atık miktarları da ekolojik sisteme büyük ölçüde zarar vermektedir. Bu doğrultuda en önemli sorumluluk anlayışlarından biri olan sürdürülebilirlik kavramı giderek önem kazanmaktadır. Özellikle bundan sonraki nesillere yaşanabilir bir dünya bırakmak ve teknolojik gelişmelerin devam edebilmesi için sürdürülebilirliğin ön plana çıkarılması gerekmektedir. Çok Kriterli Karar Verme (ÇKKV) yöntemleri bu noktada çözüme ulaşmada oldukça faydalıdır. Çok Kriterli Karar Verme yöntemlerinin sürdürülebilirlik kapsamında uygun olduğu, çok sayıda araştırmada karar modeli olarak kullanılmasından anlaşılmaktadır. ÇKKV; birçok kriteri bir arada değerlendirerek alternatiflere değerler atama süreci olarak ifade edilmektedir. Bu çalışmada da Çok Kriterli Karar Verme yöntemlerinden MULTIMOORA yöntemi ile Türkiye’de yer alan 81 ilin tehlikeli atık miktarı açısından değerlendirilmesi ve sıralanması amaçlanmıştır. Çalışmada Türkiye’deki illerin tehlikeli atık miktarı açısından değerlendirilmesi yapılırken TC. Çevre ve Şehircilik Bakanlığı’nın 2010, 2011, 2013, 2014 ve 2015 yılları verilerinden yararlanılmıştır. Kriter ağırlıkları yıllara göre eşit olarak alınmış ve daha sonra illerin değerlendirilmesinde MULTIMOORA yöntemi kullanılmıştır. Yapılan değerlendirmeler sonucunda en az tehlikeli atık miktarının Bayburt ilinde, en fazla tehlikeli atık miktarının ise Koceli ilinde olduğu görülmüştür. Ayrıca çalışma sonucunda sürdürülebilirlik kapsamında Çok Kriterli Karar Verme yöntemlerinin kullanımının uygun olduğu görülmüştür. Anahtar kelimeler: Çok Kriterli Karar Verme, Sürdürülebilirlik.
407
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Evaluation Of Cities In Terms Of Hazardous Waste Amount By Multimoora Method Hande EREN1,*, Nuri ÖMÜRBEK 2 1
Suleyman Demirel University, Isparta, Turkey Süleyman Demirel University, Isparta, Turkey * Responsible author e-mail:
[email protected] 2
Abstract Industrialization, rapid population growth and urbanization, which have developed unhealthily in our country and in the world, especially in big cities, cause the environmental problems to increase. The amount of hazardous wastes generated as a result of urbanization and industrialization also cause great damage to the ecological system. In this respect, the concept of sustainability, which is one of the most important concepts of responsibility, is becoming increasingly important. In order to leave a livable world to the next generation and to continue the technological developments, it is necessary to put the sustainability into the forefront. Multi Criteria Decision Making (MCDM) methods are very useful in reaching solution at this point. Multi-Criteria Decision Making methods are appropriate for sustainability, as they are used as decision models in many researches. MCDM; it is expressed as the process of assigning values to alternatives by evaluating many criteria together. In this study, it is aimed to evaluate and rank the 81 provinces in Turkey in terms of the amount of hazardous waste by using MULTIMOORA method which is a Multi Criteria Decision Making method. In the study, when the assessment of the illicit waste amount of the illicit products in Turkey is made, The 2010, 2011, 2013, 2014 and 2015 data of the Ministry of Environment and Urban Planning were utilized. Criterion weights were taken as equal according to years and then MULTIMOORA method was used in the evaluation of cities. As a result of the evaluations made, it is seen that the minimum amount of hazardous waste is in Bayburt and the highest amount of hazardous waste is in Koceli. Moreover, it has been found that the use of Multi Criteria Decision Making methods within the scope of sustainability is appropriate. Key words: Multi-Criteria Decision Making, Sustainability.
408
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Yenilenebilir Enerji Kaynaklarının Seraların Elektrik Enerjisi İhtiyacında Kullanımı Haris CALGAN1,*, Metin DEMIRTAS1, Erdem ILTEN1 Balıkesir Üniversitesi, Balıkesir, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
Özet Yenilenebilir enerji kaynakları, petrol kaynaklarının tüketimi, enerji fiyatlarındaki artış ve çevresel sorunlar göz önüne alındığında son dönemlerde ilgi odağı haline gelmiştir. Evrensel kirliliğin büyümesi ve kullanılan petrol kaynaklarının kısıtlı olmasından dolayı birçok ülke, rüzgâr türbini, güneş enerjisi, küçük hidro-elektrik santrallerinin kurulumu, biyogaz ve jeotermal enerjinin kullanımı gibi yenilenebilir enerji planlarını uygulamaya başlamıştır. Ülkemizde yenilenebilir enerji kaynaklarının en önemli kullanım alanlarından birisi de seralardır. Seralardaki ortamın bitki yetiştirilmesine uygun olabilmesi için ısıtma, havalandırma, aydınlatma, sulama gibi işlemlerin yapılması gerekmektedir. Elektrik şebekesinin olmadığı bölgelerde bu işlemlerin yapılabilmesi için gerekli olan enerji ihtiyacı dizel jeneratörlerden veya hatalı planlanmış yenilenebilir enerji kaynaklarından karşılanmaktadır. Dolayısıyla küresel ısınmaya neden olan CO2 gazı açığa çıkmaktadır veya birim enerji maliyeti artmaktadır. Bu çalışmada Türkiye’deki yenilenebilir enerji kaynaklarının kullanıldığı seralar incelenmiştir. Daha sonra Balıkesir bölgesi için, şebeke bağlantısı olmayan bir sera planlanıp ısıtma, havalandırma, sulama, aydınlatma ihtiyacı için gerekli olan elektrik enerji miktarları saatlik olarak düşünülmüştür. Balıkesir bölgesi için meteorolojik bilgilere dayalı güneş radyasyonu ve rüzgâr verileri, Homer programında kullanılarak, sera için minimum maliyet ve minimum CO2 salınımıyla enerji ihtiyacının karşılanması sağlanmıştır. 25 yıl ömür biçilen sera için 10 kW’lık rüzgâr türbini, 1 kW’lık güneş panelleri, 10 kW’lık dizel jeneratör ve batarya grupları kullanılmıştır. Günlük enerji ihtiyacının 96 kWh’a çıktığı durumda, birim enerji maliyeti 1.72 TL’den 0.635 TL’ye, CO2 salınımı ise yıllık 37.370 kg’dan 8.119 kg’a kadar düşürülmüştür. Böylelikle Balıkesir bölgesinde bulunan şebekeden bağımsız bir seranın, minimum maliyet ve minimum CO2 salınımıyla bitki yetiştirilmek için gerekli olan enerji ihtiyacı hesaplanmıştır. Anahtar kelimeler: Yenilenebilir enerji kaynakları, Sera, CO2 salınımı.
409
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Using of Renewable Energy Sources in Electric Energy Need of Greenhouses Haris CALGAN1,*, Metin DEMIRTAS1, Erdem ILTEN1 1
Balikesir University, Balikesir, Turkey *Responsible author e-mail:
[email protected]
Abstract Renewable energy sources have recently become a focus of attention when the increase in consumption of petroleum resources, energy prices and environmental problems are taken into consideration. Due to the growth of universal pollution and the use of limited petroleum resources, many countries have started to implement their renewable energy plans such as installation of wind turbine, solar energy, small hydroelectric power plants and the use of biogas and geothermal energy. One of the most important usage areas of renewable energy sources in our country are the greenhouses. Heating, ventilation, lighting, irrigation processes have to be done in order to have the suitable conditions of greenhouses for growing plant. In areas where there is no electricity network, the energy requirement for these operations is met by diesel generators or improperly planned renewable energy sources. Therefore, CO2 gas, which causes global warming, is released or unit energy cost increases. In this study, greenhouses where renewable energy sources are used in Turkey are examined. After that, for the Balikesir region, a greenhouse without grid connection was planned and the amount of electric energy needs for heating, ventilation, irrigation, lighting was considered hourly. For the Balikesir region, meteorological information based solar radiation and wind data were used in the Homer program to meet the energy need with minimum cost and minimum CO2 emission for the greenhouse. 10 kW wind turbine, 1 kW solar panels, 10 kW diesel generator and battery groups were used for the 25 years life assessed greenhouse. In the case of daily energy demand reaching 96 kWh, unit energy cost decreased from 1.72 TL to 0.635 TL and CO2 emission decreased from 37.370 kg to 8.119 kg per year. Thus, the energy requirement for plant growth of a greenhouse which is independent from grid in Balikesir region is calculated with minimum cost and minimum CO2 emission. Key words: Renewable energy sources, Greenhouse, CO2 emission.
410
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Bir Isı Değiştiricisinde Farklı Çeşit ve Konsantrasyonlardaki Nano Akışkanların Isıl Performansa Etkisinin İncelenmesi Refet KARADAĞ1,*, Harun ÇİFCİ2, İsmail HİLALİ3, Mehmet DİRİLMİŞ4, Yunus DEMİRTAŞ5 Harran Üniversitesi, Şanlıurfa, Türkiye Harran Üniversitesi, Şanlıurfa, Türkiye 3 Harran Üniversitesi, Şanlıurfa, Türkiye 4 Harran Üniversitesi, Şanlıurfa, Türkiye 5 Harran Üniversitesi, Şanlıurfa, Türkiye 1
2
*Sorumlu yazar e-posta:
[email protected]
Özet Günümüzde kullanılan pek çok endüstriyel ve sivil uygulamada yüksek miktarda ısı transferine ihtiyaç duyulurken bu sistemlerin daha düşük enerji sarfiyatı ve maliyetinin olması istenilmektedir. Bu talepler doğrultusunda bu tür uygulamalarda kullanılan ısı değiştiricilerinde ısı transferini iyileştirmeye yönelik çalışmalar son dönemlerde büyük önem kazanmaktadır. Isı transferini artırmaya yönelik pek çok yöntem vardır ancak ısı transfer sistemi içerisinde iş yapan akışkan olarak su, etilen glikol, yağ gibi düşük ısı iletkenlik değerlerine sahip olan akışkanlar kullanılmaktadır. Bu özellikleri nedeniyle yüksek miktarda ısı transferine engel olmaktadırlar. Katıların ısıl iletkenliklerinin sıvılardan daha yüksek olduğu genelde bilinen bir durumdur. Sıvı içerisine katı partiküllerin eklenmesi ile ısı transferinin artırılması sağlanabilmektedir. Son yıllarda ilerleyen teknoloji ile birlikte nanometre boyutunda metalik ve metalik olmayan katı partiküllerin üretimi gerçekleştirilebilmekte ve bu partiküllerle nano akışkanlar üretilebilmektedir. Bu çalışmada bir ısı değiştiricisi için ısıl performans analizi saf su ve nano akışkanlar için nümerik olarak yapılmıştır. Çalışmada kullanılacak nano akışkanları elde amacıyla Al2O3, TiO2, CuO ve SiO2 nano partikülleri seçilmiştir. Temel akışkan olarak da saf su seçilmiştir. Hacimsel olarak %0.1, %0.5, %1 ve %2 olmak üzere 4 farklı konsantrasyon için nano akışkanların termal özellikleri teorik olarak hesaplanmıştır. Termal özellikleri belirlenen nano akışkanların bir ısı değiştirici içerisinde farklı sıcaklık ve debi değerleri için ısıl performansları nümerik olarak incelenmiştir. Sonuçlar saf suyla yapılan hesaplamalar ile kıyaslanmıştır. Çalışma sonucunda partikül çeşidinin, konsantrasyon oranının ve farklı debi değerleri için ısıl performansa etkisi tespit edilmiştir. Anahtar kelimeler: Isı transferi, Nano akışkan, Isı değiştirici.
411
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Investigation Of Thermal Performance Effect Of Nano Fluids In Different Types And Concentrations In A Heat Exchanger Refet KARADAĞ1,*, Harun ÇİFCİ2, İsmail HİLALİ3, Mehmet DİRİLMİŞ4, Yunus DEMİRTAŞ5 Harran University, Şanlıurfa, Türkiye Harran University, Şanlıurfa, Türkiye 3 Harran University, Şanlıurfa, Türkiye 4 Harran University, Şanlıurfa, Türkiye 5 Harran University, Şanlıurfa, Türkiye *Responsible author e-mail:
[email protected] 1
2
Abstract Today in many industrial and civil applications, while high amounts of heat transfer are needed, it is desirable that these systems have lower energy consumption and cost. Efforts to improve heat transfer in heat exchangers used in such applications in the direction of these demands have recently gained great importance. There are many ways to increase heat transfer, but fluids that have low thermal conductivity values such as water, ethylene glycol, and oil are used as the working fluid in the heat transfer system. Because of these properties, they prevent high amounts of heat transfer. It is generally known that the thermal conductivities of the solids are higher than the liquids. By adding solid particles into the liquid, it is possible to increase the heat transfer. In recent years, by the advancing technology, production of metallic and non-metallic solid particles in nanometer size can be realized and nanofluids can be produced with these particles. In this work, thermal performance analysis for a heat exchanger was made numerically for pure water and nano fluids. Al2O3, TiO2, CuO and SiO2 nanoparticles were selected for the purpose of obtaining nanofluids for use in the study. Pure water has also been chosen as the basic fluid. The thermal properties of nanofluids were calculated theoretically for 4 different concentrations, 0.1%, 0.5%, 1% and 2% by volume. The thermal performances of the nanofluids with different thermal properties have been investigated numerically for different temperature and flow values in a heat exchanger. The results are compared with calculations made with pure water. As a result of the study, the thermal performance of the particle type, the concentration ratio and the different flow rates were determined. Key words: Heat transfer, Nano fluid, Heat exchanger.
412
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Bir Ortamda Kullanılan Hava Perdesinin Farklı Yerleştirme Şekillerinin Isıl İzolasyona Etkisinin Nümerik Olarak İncelenmesi İsmail HİLALİ1,*, Harun ÇİFCİ2, Refet KARADAĞ2 Harran Üniversitesi, Şanlıurfa, Türkiye Harran Üniversitesi, Şanlıurfa, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2
Özet Bir odanın ısıl izolasyonunu sağlamada kullanılan yöntemlerden biri de hava perdesi kullanımıdır. Hava perdesi ile yalıtılmış bir hacime erişmek mümkün olabilmektedir. Bu teknik, fırın ısı yalıtımı, gıda muhafaza ve bazı bölümleri (duvar, kapı vs.) açık ortamları iklimlendirmede en çok kullanılan yöntemlerden biri olmaktadır. Böyle bir sistemde kullanılan hava jetindeki akışın gelişimini ve kontrolünü tespit etmek son derece önemlidir. Nitekim bu tip izolasyonların performansları akışın stabilitesi ile büyük ölçüde bağlantılıdır. Hava perdesi ile izolasyon yapılmak istenilen ortamda akış çevresel etkenlerden dolayı kararsız hale gelirse hava jeti kısmen işlevini kaybeder. Hava perdeleri, koruyucu bir hava kalkanı sağlayan, yönlendirilmiş yüksek hızlı havanın jetini oluşturan bir fan ve nozul sisteminden oluşur. Ortamlardaki boşluklar sıcaklık farkıyla bölünürken, hava perdesi sayesine farklı sıcaklıkların neden olduğu havanın doğal akışı engellenir. İç hava sıcaklığı ile dış hava sıcaklığı arasındaki fark yoğunlukta bir dengesizlik oluşturur. Dolayısıyla dış hava sızmasına neden olan bir basınç değişimi oluşturur. Bu çalışmada içerisinde ısı üretimi olan bir odanın ısı ve akış analizi nümerik olarak yapılmıştır. İki adet hava perdesi ön ve arka duvarlara bağlanmıştır. Bu duvarların büyük bölümleri dış ortama açıktır. Diğer iki duvar ise adyabatiktir. Çalışma sonucunda hava perdelerinin ısı transferine ve oda içerisindeki hava akımlarına olan etkisi tespit edilmiştir. Hava perdeleri farklı yerleştirme şekilleriyle konumlandırılarak ısıl izolasyona etkileri incelenmiştir. Elde edilen sonuçlara göre hava perdesinin konumlandırma şeklinin ısı transferi ve akış karakteristikleri bakımından etkili olduğu tespit edilmiştir. Anahtar kelimeler: Hava perdesi, Isıl izolasyon, Hava jeti.
413
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Numerical Investigation Of The Effects Of Different Placement Methods On Thermal Insulation Of The Air Curtain In An Environment İsmail HİLALİ1,*, Harun ÇİFCİ2, Refet KARADAĞ2 Harran University, Şanlıurfa, Türkiye Harran University, Şanlıurfa, Türkiye *Responsible author e-mail:
[email protected] 1
2
Abstract One of the methods used to provide thermal insulation of a room is the use of air curtains. It is possible to achieve an insulated volume with air curtain. This technique is one of the most widely used methods for air-conditioning outdoor environments such as oven heat insulation, food storage and some parts (walls, doors, etc.). It is very important to identify the development and control of the flow of the air jet used in such a system. Indeed, the performances of such isolations are largely related to the stability of the flow. In the environment where isolation with air curtain is desired, if the flow becomes unstable due to environmental factors, the air jet partly loses its function. Air curtains consist of a fan and nozzle system that creates a jet of guided high-speed air that provides a protective air shield. While the gaps in the media are divided by the temperature difference, the natural flow of the air caused by the different temperatures due to the air perturbation is prevented. The difference between the inside air temperature and the outside air temperature creates an imbalance in density. Therefore, it creates a pressure change which causes external air leakage.In this study, the heat and flow analysis of a room with heat production is done numerically.Two air curtains are attached to the front and rear walls. Large portions of these walls are open to outside.The other two walls are adiabatic. As a result of the study, the effect of air curtains on the heat transfer and the air currents in the room was determined. Air curtains were positioned with different placement patterns and their thermal insulation effects were examined. According to the results obtained, it has been found that the air perturbation is effective for the heat transfer and flow characteristics of the position. Key words: Air curtain, Thermal insulation, Air jet.
414
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Gökdelenlerin Sürdürülebilirlik ve Sürdürülebilir Şehirler Bağlamında Yeniden Düşünülmesi - Yeni Tasarım İlkeleri Hasan BEGEÇ1,*, A. İlker YALINER2 Dokuz Eylül Üniversitesi Mimarlık Fakültesi Mimarlık Bölümü, İzmir, Türkiye Dokuz Eylül Üniversitesi Mimarlık Fakültesi Mimarlık Bölümü, İzmir, Türkiye *Sorumlu yazar e-posta:
[email protected]
1 2
Özet Günümüz global kentlerinin imajlarının belirlenmesindeki en önemli araçlardan biri olan gökdelenlerin imajı sürdürülebilirlik anlayışı içinde yer almasa da yeni yapılmakta olan gökdelenlerin gelişen teknolojinin de yardımıyla sürdürülebilir mimarlık kapsamında yapılmaya başladığını görebiliriz. İşte bu noktada gökdelenlerle ilgili iki soru akla gelmektedir. Bunlardan ilki bu tip yapıların sürdürülebilir olarak yapımında tasarım ilkeleri neler olmalıdır? İkincisi de son zamanlarda kentleşme literatüründe tartışılmakta olan sürdürülebilir kentlerin sağlanmasında gökdelenlerin rolü nedir? Çalışmada bu bağlamda “sürdürülebilir kent” kavramı ve esasları ilk aşamada açıklanmaktadır. Sürdürülebilir kentler; çevrenin en az düzeyde kirletildiği, kaynakların etkin ve verimli kullanıldığı, arazinin yatay değil dikey olarak kullanıldığı, kentsel hareketliliğin aza indirildiği, insan ölçeğinde ve yaşanabilir niteliğe sahip mekânsal tasarımların gerçekleştirildiği yerleşimler olarak tanımlanmaktadır. Özellikle büyük ölçekleri ve çok fazla sayıda insan barındırıyor olmalarından dolayı kent üzerindeki etkileri ve çevre yükleri diğer yapılara göre daha fazla olan gökdelenlerin “Sürdürülebilir kent” bağlamında incelenmesi yapılmaktadır. Çalışmanın ikinci aşamasında kentin siluetinin-dokusunun oluşmasındaki ana unsurlar olan gökdelenler, sürdürülebilirlik bağlamında ele alınarak; estetik, sosyal, ticari ve çevresel bakış açısı ile incelemesi yapılmaktadır. Son birkaç on yılda gökdelenlerin teknolojilerinde, verimliliklerinde ve performansında önemli gelişmeler olmasına rağmen, tipik bir gökdelenin tasarımı ve kentsel ifadesi, 1950'li yıllardaki Modernizm tarafından savunulan, ağırlıklı olarak cam-çelik estetiğinden oluşmaktadır. Cam kaplamalı kutu formu hala gökdelenlerin çoğunluğunun tasarımında ana şablon olarak kullanılmaktadır. Bu hali ile de gökdelenler günümüzde küreselleşmiş bir ifadenin parçası konumundadır. Çalışmada buna karşıt olarak gökdelenler için yeni tasarım ilkeleri belirlenmekte açıklamaları yapılmaktadır. Çalışmada ayrıca dünyanın her yerindeki gökdelenler için yeni yerel tasarım ilkelerinin belirlenmesinin gerekli olduğu ve bu durumunda önemli ekolojik ve sosyal faydaları olacağı öngörüsünde bulunmaktadır. Anahtar kelimeler: Sürdürülebilirlik, Sürdürülebilir kentler, Sürdürülebilir gökdelen tasarım ilkeleri.
415
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Rethinking the Skyscrapers in the Context of Sustainability and Sustainability Cities - New Design Principles Hasan BEGEÇ1,*, A. İlker YALINER2 Dokuz Eylül Üniversity Architectural Faculty Architectural Department, İzmir, Türkiye Dokuz Eylül Üniversity Architectural Faculty Architectural Department, İzmir, Türkiye *Responsible author e-mail:
[email protected]
1 2
Abstract Although the image of skyscrapers, which is one of the most important means of determining the images of today's global cities, is not included in the concept of sustainability, we can see that newly constructed skyscrapers are being built under sustainable architecture with the help of developing technology. At this point there are two questions about skyscrapers. What must be the design principles for the sustainable of this building type? Secondly, what is the role of skyscrapers in providing sustainable cities, which are being discussed in the urbanization literature in recent times? In this context, the concept and principles of "sustainable city" are explained in the first stage of the study. Sustainable cities; It is defined as settlements where the environment is minimally polluted, resources are used effectively and efficiently, land is used not horizontally but vertically, urban mobility is reduced, human scale and habitable spatial designs are realized. Due to their large scale and a large number of people, skyscrapers with a greater impact on the city and greater environmental loads than the rest of the city are being investigated in the context of the "sustainable city". In the second stage of the study, skyscrapers, which are the main elements in the formation of the city's silhouette, are discussed in the context of sustainability; Aesthetic, social, commercial and environmental point of view. Despite significant improvements in the technology, efficiency and performance of skyscrapers over the last few decades, the design and urban expression of a typical skyscraper is predominantly made of glass-steel aesthetics, championed by Modernism in the 1950s. The glass-skinned box form is still used as the main template in the design of the majority of skyscrapers. In this way, skyscrapers are now part of a globalized expression. In contrast to this, explanations are being made to determine new design principles for skyscrapers. The study also suggests that the identification of new local design principles for skyscrapers around the world is necessary and that there will be significant ecological and social benefits in this case. Key words: Sustainability, Sustainable cities, Sustainable skyscraper design principles.
416
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Kıyı Tipi Dalga Enerjisinden Elektrik Üretim Sistemlerinin Dolgu Alanlarında Kullanılabilirliğinin Araştırılması Hasan İslam ÇOPUROĞLU1,*, Emre PEŞMAN2 1
Karadeniz Teknik Üniveristesi, Gemi İnşaatı veGemi Makineleri Mühendisliği Bölümü, Trabzon, Türkiye Karadeniz Teknik Üniveristesi, Gemi İnşaatı veGemi Makineleri Mühendisliği Bölümü,Trabzon, Türkiye *Sorumlu yazar e-posta:
[email protected]
2
Özet Küresel ısınma, çevresel kirlilik, doğanın tahribatı gibi nedenlerle günümüzde yenilenebilir enerji kaynaklarının ve bunlardan etkin şekilde yararlanmanın önemi gün geçtikçe artmaktadır. Ülkemizde olduğu gibi dünyanın birçok bölgesinde de kıyı şeridinin daha etkin kullanılmasını sağlamak ve inşaat alanları açmak amacı ile kıyılar doldurulmaktadır. Bu çalışmada kıyı dolum işlemi dahilindeki yeni deniz sınırına yerleştirilebilecek dalga enerjisi sistemlerinin uygulanabilirliği araştırılmıştır. Kıyı doldurma işlemi uzun süreler isteyen maliyetli bir iştir ve dolgu işlemi sırasında kıyı tipi dalga enerjisi üretim sistemlerinin deniz sınırına kurulumlarının yapılması ekstra bir kurulum maliyetini ortadan kaldırabileceği gibi, dolgunun fiziksel yapısı ile de uyumlu olacağı düşünülmektedir. Zaten sürmekte olan ya da yapılacak olan dolgu projelerine dalga enerjisinden elektrik üretim sistemlerinin eklenmesi ile yeni bir iş alanının ortaya çıkması ve elde edilen temiz enerji ile ülke ekonomisine katkıda bulunulması ve temiz enerjilerden yararlanmayı daha çok artıracağından enerji üretiminden kaynaklanan doğaya verilen zararın azaltılabileceği düşünülmektedir. Bu çalışmanın amacı kıyı dolgu projelerine dahil edilecek bir dalga enerjisinden elektrik üretim sisteminin verimliliğinin araştırılmasıdır. Örnek bir kıyı dolgu ve dalga enerjisi sistemi hesaplamalı akışkanlar dinamiği yardımı ile modellenmiş ve elde edilen bulgular incelenmiştir. Sonuçlardan bu sistemin kurulumunun verimli olabileceği çıkarımları yapılabilir. Ayrıca, dolgu alanlarına dalga enerjisi sistemlerinin kurulumlarının yaygınlaşması durumunda ülke ekonomisine fayda sağlayabileceği bunun yanı sıra, enerji üretiminde çevreye verilen zararın azaltılabileceği ve sürdürülebilirliğin artırılabileceği sonuçları çıkarılabilmektedir. Anahtar kelimeler: Dalga enerjisi, kıyı dolgusu, hesaplamalı akışkanlar dinamiği, yenilenebilir enerjiler, sürdürülebilirlik.
417
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Investigation of the Usability of Electricity Production from Coastal Wave Energy Systems in Land Reclamation Areas Hasan İslam ÇOPUROĞLU1,*, Emre PEŞMAN2 1
Karadeniz Technical University, Department of Naval Architecture and Marine Engineering, Trabzon, Türkiye 2 Karadeniz Technical University, Department of Naval Architecture and Marine Engineering, Trabzon, Türkiye * Responsible author e-mail:
[email protected]
Abstract Nowadays, renewable energy sources and the effective use of them is getting more and more important day by day because of global warming, environmental pollution and devastation of the natural environment. As in our country, many countries of the world have land reclamation projects to make more efficient use of the coastlines and to open construction sites. In this study, the feasibility of wave energy systems which can be placed in the new coastal boundary within the land reclamation process has been investigated. It is considered that installation of coastal type wave energy production systems at seaboard during land reclamation process which requires long periods is considered to be compatible with the physical structure of the reclamation border to sea, also installation of wave energy systems can avoid the extra installation costs of wave energy systems during the land reclamation process. It is thought that the addition of electricity generation systems from wave energy to the land reclamation projects that are already under construction or to be done will contribute to the country's economy with the aid of a new business area and the increase in utilization of clean energy will decrease the devastation to natural environment caused by energy production. The aim of this work is to investigate the efficiency of the electricity generation from wave energy systems that can be incorporated into land reclamation projects. An exemplary land reclamation seaboard with wave energy system is modeled with computational fluid dynamics method and the resulting findings are examined. The conclusions can be inferred that the installation of this system can be effective. In addition, if the installation of wave energy systems increases at the land reclamation areas, it can benefit the economy of the country. Besides, it can be concluded that the damage to the environment in energy production can be reduced and sustainability can be increased. Key words: Wave energy, land reclamation, computational fluid dynamics, renewable energies, sustainability.
418
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Nanoparçacık Modifiyeli Kompozitlerin Kenar Çentikli Eğilme Numunesi Kullanılarak Kırılma Tokluklarının Değerlendirilmesi Hasan ULUS1,*, Halil Burak KAYBAL1, Okan DEMİR1, Ahmet AVCI1 Selçuk Üniversitesi, Makine Mühendisliği Bölümü, Konya, Türkiye *Sorumlu yazar e-posta:
[email protected]
1
Özet Bu çalışmanın amacı karbon fiber takviyeli epoksi kompozitlerin kırılma topluluğuna nanoparçacıkların etkisini incelemektir. Bu sebep ile tek kenar çentikli eğilme testi ile deneysel çalışmalar gerçekleştirilerek nano alümina (Al2O3) ve nano kalsiyum karbonat (CaCO3) parçacıklarının kırılma tokluğuna etkisi incelenmiştir. Burada tek kenar çentikli eğilme testleri oda sıcaklığında ASTM D5045-99 standartına uygun olarak 10 mm/dk. eğme hızında yapılmıştır. Kırılma tokluk değerleri olan gerilme şiddet faktörü KIc nano Al2O3 ve nano CaCO3 eklenmesi ile sırasıyla %15 ve %30 artmış olduğu hesaplanmıştır. Anahtar kelimeler: Kırılma, nano Al2O3, nano CaCO3, epoksi kompozit.
419
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Fracture Toughness Evaluation of Nanoparticle Modified Composites Using Single Edge Notched Bending (SENB) Specimens Hasan ULUS1,*, Halil Burak KAYBAL1, Okan DEMİR1, Ahmet AVCI1 1
Selcuk University, Department of Mechanical Engineering, Konya, Turkey *Responsible author e-mail: abc@abcabc
Abstract The aim of this study was to describe the effect of nanoparticle on fracture toughness of carbon fiber reinforced epoxy composites. Therefore, an experimental study which using single edge notch bending (SENB) test was carried out to examine the fracture response for different nanoparticle loading of nano alumina (Al2O3) and nano calcium carbonate (CaCO3). SENB tests were carried out at room temperature with a crosshead speed of 10 mm/min according to ASTM D5045-99. Fracture toughness values which indicated by the stress intensity factor KIc of nano Al2O3 and nano CaCO3 were increase 15% and % 30, respectively. Key words: Fracture, SENB test, nano Al2O3, nano CaCO3, epoxy composite.
420
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Kent Markalaşması ve Kent Kimliğinin Markalaşmaya Katkısı Hatice Livanur DANIŞIK1,*, Nazlı Ferah AKINCI2 KTO Karatay Üniversitesi, Konya, Türkiye Yıldız Teknik Üniversitesi, İstanbul, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2
Özet Günümüz kentleri benzer mimari özelliklere sahipken, özgün tarihsel gelişim süreçleri ile farklılaşmaktadırlar. Bu süreç kentin kimliğinin oluştuğu zaman dilimidir. Kenti oluşturan doğal ve yapay bileşenler, sosyo-kültürel değerler, kentin kimliğinin ana etmenleridir ve o kenti eşsiz kılmaktadır. Kentler tarih boyunca bir takım değişikliklere uğramış ve yüklendikleri işlevler zamanla farklılıklar göstermiştir. Günümüzde, küresel dünya düzeninde kentler ekonomik kalkınmanın önemli birer göstergesi haline gelmiştir. Küreselleşme nedeniyle yerel ve bölgesel farklılıkların ortadan kalkması, küresel monokültürün oluşmasına sebep olmaktadır. Bu şekilde monokültürün kentlerin özgün kimliğini tehdit edecek kadar yaygınlaşması riski oluşmaktadır. Küreselleşme sürecinin bu tek tipleştirme etkisi, kentlerin kendine özgü imaj değerlerini kullanarak markalaşabilmeleri için bir rekabet ortamı oluşturmuştur. Günümüzde markalaşma kentin yaşam kalitesini, ekonomik gücünü ve turizm kapasitesini geliştiren bir kalkınma politikası olarak görülmektedir. Markalaşma aynı zamanda kentlerin mekân kalitesini, tarihi birikimini, yaşam biçimini ve kültürünü kısacası kentsel imajını açıklayabilmeleri için bir araç olmuştur. Kentsel imaj, markalaşma sürecinde kentlerin ihtiyaç duyduğu özgün ve güçlü yönlerinin vurgulanması açısından avantaj olarak değerlendirilebilir. Tüm bu özellikler göz önüne alındığında kentlerin sahip olduğu imaj, markalaşma gücünü doğrudan etkilemektedir. Çalışmada, kentsel imajın önemli bir bileşeni olan kent kimliği ve mimari değerlerin kent markasına katkısı incelenmiştir. Yapılan araştırmalar ile dünyadan marka kent örnekleri kent kimliği kavramı üzerinden değerlendirilmiştir. Sonuç olarak; kent kimliğinin marka değerler üzerinden çıkarımları ve gereksinimleri ortaya konmuştur. Anahtar kelimeler: Marka kent, kentsel imaj, kent kimliği, turizm, kültürel politika.
421
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
City Branding and Contribution of City Identity to City Branding Hatice Livanur DANIŞIK1,*, Nazlı Ferah AKINCI2 1
KTO Karatay University, Konya, Turkey Yıldız Tecnichal Univercity, İstanbul, Turkey *Responsible author e-mail:
[email protected] 2
Abstract It is believed that many cities have similarities. Even though cities have similar basic characteristics, each has their own historical development process. This is the time when the city has built its own identity. Naturel and artificial components and sociocultural values that constitutive the city make that city unique. Throughout history, cities undergo some change and their functions differentiate over time. Today, in globalizing world, cities have become an important indicator of economic development. Due to globalization, local and regional differences disappear and this situation cause a global mono-culture. Thus, there is a risk that the monoculture become widespread as threaten the original identity of the cities. This monotonizing effect of the globalization process created a competitive environment for cities to be branded using their own image values. Today, city branding is seen as a development policy that improve the quality of life, economic power and tourism capacity of cities. At the same time, city branding become a tool for cities to explain their image of city. The image of the city can be regarded as an advantage in terms of emphasize the unique and powerful aspects that the cities need in the branding process. When all these features are taken into consideration, cities’ images are directly affecting the branding power. In the study, the contribution of the city identity and architectural values, which are important components of image of the city, has been examined to the city brand. With the researches made, brand city examples from the world were evaluated about the concept of city identity. As a result; the implications and the requirements of the city identity are revealed through brand values. Key words: Branding city, the image of the city, city identity, tourism, cultural policy.
422
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Arı Ürünlerinde Mikrobiyal Kontaminasyon H. Ahu KAHRAMAN1,*, Hidayet TUTUN2 Mehmet Akif Ersoy Üniversitesi, Veteriner Fakültesi, Farmakoloji ve Toksikoloji Anabilim Dalı, Burdur, Türkiye 2 Mehmet Akif Ersoy Üniversitesi Veteriner Fakültesi, Besin Hijyeni ve Teknolojisi Anabilim Dalı, Burdur, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
Özet Ülkemiz, zengin bitki florasına sahip olması sebebiyle arıcılık açısından oldukça elverişlidir. Bal üretim miktarları dikkate alındığında dünya çapında üçüncü büyük üretici ülke konumundadır. Bal, polen, arı sütü ve propolis gibi arı ürünleri, içerdiği çeşitli vitamin, mineral, organik asit ve enzimler sebebiyle kolay sindirilebilen, besleyici ve doğal gıdalardır. Bal, pH değeri, su aktivitesi, içerdiği düşük protein ve yüksek karbonnitrojen oranı sebebiyle güvenli bir ürün olarak kabul edilse de, bakteri, maya, küf, mantar ve stramonofil gibi mikroorganizmaları da içerebilmektedir. Arı ürünleri, üretim ve işleme esnasında çeşitli yollarla kontamine olabilmektedir. Mikrobiyal kontaminasyon; polen, toz, hava, toprak, nektar yoluyla olduğu gibi, üretim ve paketleme esnasında uygulanan diğer işlemler sebebiyle de oluşabilmektedir. Sıklıkla tüketilen bu ürünlerin bulaşma kaynakları ve mikrobiyolojik kalitelerinin bilinmesi gıda güvenliği ve halk sağlığının korunmasında büyük önem taşımaktadır. Anahtar kelimeler: Arı sütü, Bal, Polen, Mikrobiyal kontaminasyon.
423
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Microbial Contamination in Bee Products H. Ahu KAHRAMAN1,*, Hidayet TUTUN2 1
Mehmet Akif Ersoy University, Veterinary Faculty, Department of Pharmacology and Toxicology, Burdur, Turkey 2 Mehmet Akif Ersoy University, Veterinary Faculty, Department of Food Hygiene and Technology, Burdur, Turkey *Responsible author e-mail:
[email protected]
Abstract There is great potential for beekeeping and honey production because of the rich flora of Turkey. Considering honey production quantities, it is the third largest producer country in the world. Honeybee products such as honey, pollen, royal jelly and propolis are nutritious and natural foods that are easily digestible due to the various vitamins, minerals, organic acids and enzymes which they contain. Although it is considered a safe product due to its low pH, water activity, low protein content and high carbon-nitrogen content, it can also contain microorganisms such as bacteria, yeast, mold, fungi and stramonophils. Honeybee products are contaminated in various ways during production and processing. Microbial contamination can be occur via pollen, dust, air, soil, nectar, as well as the other processes applied during production and packaging. Knowing the infectious sources and microbiological qualities of these products consumed frequently has great importance in the protection of public health and food safety. Key words: Honey, Microbial contamination, Pollen, Royal jelly.
424
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Çevre Güvenliği ve Arı Ürünlerinde Kimyasal Kontaminasyon Hidayet TUTUN1,*, H.Ahu KAHRAMAN2 Mehmet Akif Ersoy Üniversitesi, Veteriner Fakültesi, Farmakoloji ve Toksikoloji Anabilim Dalı, Burdur, Türkiye 2 Mehmet Akif Ersoy Üniversitesi Veteriner Fakültesi, Besin Hijyeni ve Teknolojisi Anabilim Dalı, Burdur, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
Özet Arı ürünleri, doğal, temiz ve sağlıklı olmasıyla bilinir. Çocuklar, yaşlılar ve hasta insanların daha çok tükettiği bal, propolis gibi arı ürünleri yaygın bir şekilde gıda ve ilaç olarak kullanılmaktadır. Bu nedenle, arı ürünleri herhangi bir kimyasal kontaminasyondan arınmış ve insan tüketimi için güvenli olmalıdır. Arı yetiştiriciliğinde, pestisit ve antibiyotiklerin tarımsal kontaminasyonu büyük bir sorundur. Arıların bakteriyel hastalıklarında kullanılan antibiyotiklerin ve arı hastalıkları ve zararlılarının kontrolünde ve bitkilerin korunmasında böcek ilacı olarak kullanılan pestisitlerin yaygın ve kontrolsüz kullanılması, çevre, hayvan türleri ve insanın kirlenmesine neden olmaktadır. Ayrıca, arıcılıkta kullanılan malzemelerden ve endüstri atıklarından kaynaklı ağır metal kontaminasyonu da görülmektedir. Arı ürünlerinin bu gibi kimyasal maddeler ile kontamine olması ciddi sağlık sorunlarına neden olabilir. Özellikle pestisitler, ağır metaller, veteriner ilaçları ve radyo aktif maddeler kirlenen arı ürünleri genetik mutasyonlara, hücre bozulmalarına, dirençli insan veya hayvan patojenlerinin gelişmesine neden olmaktadır. Ayrıca, arı ürünlerinin uygun koşullarda saklanmaması sonucu kimyasal yapısında değişimler ve bazı bitkilerden elde edilen balların (deli bal) bileşimindeki maddeler de sağlık sorunları oluşturmaktadır. Tüketicinin sağlığını korumak için arı ürünlerinde bu kimyasalların ulusal kalıntı izleme programları oluşturulmalı ve kaynağı, bileşimi ve komtaminasyondan arındırılmış olduğu açıkça ifade edilen arı ürünleri gıda ve tıbbi amaçlı kullanılmalıdır. Anahtar kelimeler: Arı, Bal, Kimyasal, Kontaminasyon.
425
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Environmental Safety and Chemical Contamination in Bee Products Hidayet TUTUN1,*, H.Ahu KAHRAMAN2 1
Mehmet Akif Ersoy University, Veterinary Faculty, Department of Pharmacology and Toxicology, Burdur, Turkey 2 Mehmet Akif Ersoy University, Veterinary Faculty, Department of Food Hygiene and Technology, Burdur, Turkey *Responsible author e-mail:
[email protected]
Abstract Honeybee products such as honey, propolis are known to be naturel, clean and healthy. The products which are consumed more by children, elderly and sick people, are widely used as food and medicine. Therefore, they must be free of any chemical contaminants and safe for human consumption. In beekeeping, agricultural contamination of pesticides and antibiotics is a big problem. The widespread and uncontrolled use of antibiotics used in bacterial diseases and pesticides used in the control of bee diseases and pests and plant protection causes pollution of the environment, animal species and human beings. In addition, heavy metal contamination from beekeeping materials and industrial wastes is also observed. Contamination of bee products with such chemicals can cause serious health problems. Bee products, polluted by pesticides, heavy metals, veterinary drugs and radioactive substances, cause the development of resistance in human or animal pathogens, genetic mutations and cellular degradation. In addition, changes in the chemical structure of bee products not being stored under suitable conditions and the substances in the compound of honey (mad honey) obtained from the nectar of some plants cause health problems. Strict national residue monitoring programs of these chemicals should be established in bee products to protect the consumers and the products that are clearly stated to be free from the chemicals and their composition and source should be used for food and medical purposes. Key words: Bee, Chemical, Honey, Contamination.
426
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
New Approaches and Sustainability in Agricultural Activities Hülya SAYĞI1,*, Ayhan SAYĞI 1, Mehtap BAYKAL1 1
Cukurova University Yumurtalık Vocational School, Adana, Turkey * Responsible author e-mail:
[email protected]
Abstract Agricultural production, which has been the main source of life since the beginning of the civilizations, faces important problems today. The rapidly growing world population needs more and more food every day. On the other hand, the possibilities of expanding arable land are very limited and only achieved by destroying natural habitats and wild habitats. In this case, the only way to increase agricultural production is to purchase more crops from the unit side, ie to increase yield. However, the studies carried out in this direction and the methods applied are also accompanied by some negativity. Due to frequent processing, the fertility of the soil decreases and chemicals used for fertilization and plant protection can affect the product and nature in a negative way. Today, the greatest success in agriculture is to reduce the adverse environmental conditions and to achieve the desired production increase. This may only be possible by applying sustainable methods and permanent solutions in the agriculture mentioned in the preceding pages. Sustainable agriculture is the creation of an agricultural structure in which agricultural technologies that do not harm the environment as well as long-term conservation of natural resources are used. Just as in the developed countries of the world, intensive (conventional or intensive) agricultural production is used in Turkey, where synthetic production inputs are used unchecked while at the same time processing techniques and technologies are used without considering the negative consequences. Nowadays, these practices have begun to attract attention as much as industrial or urban pollution, with the effects of degradation of natural balance and the ability to create lifethreatening effects that can reach all living things as well as humans through food chains. For this reason, sustainable agriculture has become a necessity to use techniques that have not yet lost their naturalness. Here, organic farming techniques that meet quality, health and environmental standards play a key role by avoiding the use of non-natural inputs such as drugs, synthetic fertilizers. Organic agriculture, which is important in terms of the reflection of sustainable agriculture, has begun to be seen as a necessity with the development of environmental consciousness especially in recent years. Key words: Sustainable agriculture, organic agriculture, good agricultural practices, environment, soil fertility.
427
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Alternative Energy Source Use in Greenhouse Heating Hülya SAYĞI1,*, Ayhan SAYĞI 1, Mehtap BAYKAL1 1
Cukurova University Yumurtalık Vocational School, Adana, Turkey * Responsible author e-mail:
[email protected]
Abstract Greenhouses are structures that are able to provide economic growth of cultivated plants during the periods when climatic conditions are not suitable for growing plants, can provide the developmental factors necessary for crop production, and can move within. They are the plants that are produced by providing the optimum environmental conditions for plant development. Especially in the cold season, it is necessary to heat the greenhouses in order to achieve these optimum conditions. But even in temperate regions heating costs have a large share in total production expenditures. For this reason, local heating is applied only in order to protect the plants from freezing when the regular heating is not performed in the greenhouses in our country. The lack of regular heating brings problems such as low efficiency, limitations in the production range and the necessity of using hormones. In order to minimize greenhouse heating expenditures and the use of increasingly consuming fossil energy resources, it is imperative that renewable energy sources be used in the greenhouse. The main renewable energy sources that can be effectively utilized in agriculture sector are; Solar energy, wind energy, geothermal energy and biomass energy. In this study, the potentials of solar energy, geothermal energy and biomass (biogas) energy to be used in greenhouse heating systems in the country, which may have the most application potential among the natural energy sources that can be used for heating the greenhouses, are given and the problems encountered are examined. Key words: Alternative energy sources, Greenhouse, Heating.
428
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Devlet ve Toplum Düzeninin Oluşumu ve Sürdürülebilirliğinde Adaletin Önemi Hülya YALDIR1,*, Nurten KİRİŞ YILMAZ2 Pamukkale Üniversitesi, Denizli, Türkiye Süleyman Demirel Üniversitesi, Isparta, Türkiye * Sorumlu yazar e-posta:
[email protected] 1
2
Özet Devlet, hükümet veya yasaların olmadığı bir dünya düşünün. Hobbes'ın dediği gibi, böyle bir doğa durumu insan hayatının 'yalnız, fakir, pis, en acımasız ve kısa' olduğu bir savaş hali olacaktır. Kendilerini güvence altına alıp barış içinde yaşamak için, insanlar egemen bir güce ve düzenleyici ilkelere ihtiyaç duyarlar. Bununla birlikte, egemen bir güce ve ilkelere sahip olmak yeterli değildir; bunların aynı zamanda adil olması da gereklidir. Aksi takdirde, insanları bekleyen şey zenginlerle fakirler arasındaki sınıf mücadelesinin hâkim olduğu savaş halinin bir başka biçimi olacaktır. Bu, sadece devletin ve politikaların gerekliliğini değil, aynı zamanda onların adil olmasının gerekliliğini de kanıtlamaktadır. Adalet, devlette ya da toplumda barışçıl ve sürdürülebilir bir hayatın anahtarıdır. Bu görüş, Platon’dan Rawls'a kadar birçok filozof tarafından uzun süredir savunulmaktadır. Örneğin Plato, adaleti Atina'nın dejenerasyon ve çöküşten tek kurtarıcısı olarak görür. Ona göre, adalet uyumu sağlar ve iyi düzenlenmiş bir toplumun temel ilkesidir. Aynı şekilde, Aristoteles, adaletin toplumsal boyutunu vurgular ve onu en üstün erdem olarak tanımlar. Aristoteles devletinde, adalet ya yasallığı ya da eşitliği ifade eder. Bu çalışmanın amacı iki yönlüdür. Birincisi, toplumsal düzenin korunmasında ve muhafaza edilmesinde adaletin önemi hakkında farklı felsefi görüşleri sunmaktır. İkincisi, Kur'ân'ın konuyla ilgili perspektifini ortaya koyarak, özellikle İslamiyet’in, egemenlerin adaletsizliğine, köleliğe, gelir dağılımı dengesizliğine, kadınların ezilmişliğine karşı nasıl güçlü bir itiraz olarak ortaya çıktığı göstermektir. Bu açıdan, hedeflenen bu çalışma sadece eldeki konunun daha derinlemesine anlaşılmasını değil, aynı zamanda felsefenin ve dinin genelde düşünüleninin aksine birbirinden çok ayrı olmadıklarını ortaya koyacaktır. Anahtar kelimeler: Adalet, eşitlik, kanuna uygunluk, toplumsal düzen.
429
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Importance of Justice in the Formation and Sustainability of the State and Social Order Hülya YALDIR1,*, Nurten KİRİŞ YILMAZ2 Pamukkale University, Denizli, Türkiye Süleyman Demirel University, Isparta, Türkiye *Responsible author e-mail:
[email protected] 1
2
Abstract Imagine a world without a state, government or laws. Such a state of nature, as Hobbes terms it, would be a state of war where life of man is 'solitary, poor, nasty, brutish and short'. In order to secure themselves and live in peace, men need a sovereign power and regulatory policies. Nonetheless, it is not enough to have a sovereign and policies; they have to be just as well. Otherwise, what awaits men would be another form of state of war where a class struggle between the have-nots and the haves prevails. This proves not only the essentiality of the state and the policies, but also the essentiality of the justness of them. For justice is a key to a peaceful and sustainable life in a state or a society. This view has long been endorsed by a number of philosophers, from Plato to Rawls. Plato, for example, deems justice as the sole saviour of Athens from degeneration and downfall. For him, justice ensures harmony and serves as a pivotal principle of a wellordered society. Likewise, Aristotle emphasizes the societal dimension of justice and identifies it as the supreme virtue. In the Aristotelian state, justice signifies either lawfulness or fairness. The aim of this study is two-fold. First, it will present different philosophical accounts of the importance of justice in preserving and maintaining social order. Second, it will lay out the Quranic perspective of the subject matter and particularly show how Islam has emerged as a strong objection to the injustices of the rulers, to slavery, to the imbalance of income distribution, to the oppression of women. In this respect, the study not only provide a deeper understanding of the issue at hand, but also reveal that philosophy and religion are not far apart as generally thought. Key words: Justice, fairness, lawfulness, social order.
430
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
İktisadi Kalkınma ve bu Kalkınmanın Sürdürülebilirliğinde İşbirliği ve Dayanışmanın Önemi; Ibn Haldun Hülya YALDIR1,*, Nurten KİRİŞ YILMAZ2 Pamukkale University, Denizli, Türkiye Süleyman Demirel University, Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2
Özet
Genellikle, ekonomik büyümenin ve kalkınmanın rekabetçi duyguları ve rekabeti teşvik ettiği varsayılır. Benzer şekilde, rekabet de ekonomik kalkınmayı ve üretimi teşvik eder. Bugünün dünyasında görüldüğü gibi, ekonomik rekabet, herkesin kendi çıkarları için rakiplerini yok etmeye çalıştığı acımasız bir savaşa dönüşebilir. İbn Haldun başyapıtı olan Mukaddime'de (Giriş), mevcut resmi tersine çeviren bir ekonomi tasarımı ortaya koyar. Düşünür bu eserinde, işbirliği ve sosyal dayanışma ilkelerinin ön planda olduğu bir ekonomik ortam tasvir eder. Ona göre, işbirliği, sosyal dayanışma ve ekonomi birbiriyle yakından ilişkilidir. Ekonomik büyüme ve üretimin arkasındaki itici güç, insanlar arasındaki işbirliği ve dayanışma ilkesidir. Çünkü insanlar bütün ihtiyaçlarını kendi başlarına karşılayacak kapasitede değildirler. İnsanlar, diğer pek çok şey gibi, emek ve üretim amacıyla da birbirlerine bağımlıdırlar. Onların bu bağımlı doğası, ekonomik konularda karşılıklı işbirliği ve dayanışmanın yolunu açar. İnsanların işbirliği ve dayanışmaları ise, onların ihtiyaç duyduğundan daha fazla (artı) ürün üretimiyle sonuçlanır. İbn Haldun, ürün fazlasını pazarlamanın servet ve büyümeye neden olacağını iddia eder. Görüldüğü gibi, İbn Haldun'un düşüncesi, ekonomik kalkınma için, yıkıcı rekabetin değil, işbirliğinin ve toplumsal dayanışmanın ne ölçüde önemli olduğunun anlaşılması için yararlı bir araç olarak hizmet edecektir. Bu makale, bu konuyu ele alacak ve İbn Haldun'un bu konudaki görüşlerini analiz edecektir. Ayrıca, çalışmada İbn Haldun'un düşüncesinden bugünkü dünyadaki ekonomi için hangi derslerin ya da sonuçların çıkarılabileceği tartışılacaktır. Anahtar kelimeler: İbn Haldun, dayanışma, işbirliği, rekabet, ekonomik büyüme.
431
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Importance of Cooperation and Solidarity in Economic Development and its Sustainability; Ibn Khaldun Hülya YALDIR1,*, Nurten KİRİŞ YILMAZ2 Pamukkale University, Denizli, Türkiye
1
Süleyman Demirel University, Isparta, Türkiye
2
*Responsible author e-mail:
[email protected]
Abstract It is often assumed that economic growth and development encourages competitive sentiments and fuels rivalry. Likewise, competition fosters economic development and production. As evident in today's world, economic competition can turn into a brutal battle where everyone tries to destroy their opponents for their own benefit. In his magnum opus, the Muqaddimah (Prolegomena), Ibn Khaldun sets forth an account of economics that reverses the present picture. There he sketches an economic environment where the principles of cooperation and social solidarity are at the forefront. For him, cooperation, social solidarity and economics are closely intertwined. The driving force behind economic growth and production is the principle of cooperation and solidarity among people. For people are not able to satisfy all their needs by themselves. They are dependent upon each other for the purposes of labor and production among many other things. Their dependent nature paves the way for cooperation and solidarity in economic matters. Cooperation of people and their solidarity would, in turn, bring about more goods than what people need. Ibn Khaldun contends that marketing the excess of product would generate wealth and growth. As seen, Ibn Khaldun's thought would serve as a useful tool for understanding how vital cooperation and social solidarity for economic development. This paper will take up this issue and analyse Ibn Khaldun's views concerning it. In the paper, it will be also discussed what lessons or conclusions can be drawn from Ibn Khaldun's thought for economics in today's world. Key words: Ibn Khaldun, solidarity, cooperation, competition, economic growth.
432
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sera Güzlük Domates Yetiştiriciliğinde Yeni Eğilim: Sıvı Organik Gübre Tüketimi Hüseyin KALKAN1,*, Gafur GÖZÜKARA2, Mustafa KAPLAN2 Akdeniz Üniversitesi, Kumluca Meslek Yüksekokulu, Antalya, Türkiye Akdeniz Üniversitesi, Ziraat Fakültesi, Toprak Bilimi ve Bitki Besleme Bölümü, Antalya, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2
Özet Bitkisel üretimde ürün kalitesini ve miktarını etkileyen en önemli faktörlerin başında gübre uygulamaları gelmektedir. Yapılan gübreleme de yetiştirilen bitki için yeterli ve dengeli şekilde olması açısından ayrı bir öneme sahiptir. Gübreleme uygulamaları ise kimyasal ve organik gübre olarak uygulanmaktadır. Türkiye topraklarındaki organik madde miktarı yaygın olarak çok yetersiz ve yetersiz düzeyde olması son yıllarda artan sıvı organik gübre kullanımının önemini artırmaktadır. Fakat literatürde sıvı organik gübrenin kullanımı ile ilgili çok sınırlı veri ve bilgi yer almaktadır. Organik gübreleme toprağın fiziksel, kimyasal ve biyolojik özelliklerinin iyileştirilmesi ile birlikte insan sağlığı, çevre üzerine olumlu etkisi ve ekonomik kayıpların azaltılmasına da katkı sağlayabilmektedir. Bu çalışma, Antalya ilinin değişik lokasyonlarında, güzlük domates yetiştiriciliği yapılan 12 farklı üretici serasında gerçekleştirilmiştir. Üreticilerin sıvı organik ve kimyasal gübre tüketimleri hiçbir müdahalede bulunulmadan gerçekleşmiş ve yüz yüze görüşerek kayıt altına alınmıştır. Üreticilerin sıvı organik gübre tüketim miktarları incelendiğinde, 0,00 ile 67,30 kg/da ve sıvı organik gübre kullanım oranlarının ise % 0,00 ile % 29,04 arasında değiştiği hesaplanmıştır. Ortalama sıvı organik gübre tüketim miktarları incelendiğinde, 26,98 kg/da ve ortalama sıvı organik gübre kullanım oranlarının ise % 13,55 olarak belirlenmiştir. Araştırma sonuçlarına göre geçmişte sadece kimyasal gübre uygulayarak üretim faaliyetlerini sürdüren üreticilerin günümüzde sıvı organik gübre uygulamalarına da giderek artan oranda yer verdiği görülmektedir. Bu veriler doğrultusunda bitkisel üretimde gübre uygulamaları arasında sıvı organik gübre kullanım oranı ve gübre çeşitliliğinin giderek artacağını öngörmekteyiz. Bu türlü izleme ve değerlendirme çalışmaları diğer bitkisel üretimlerde ve farklı bölgelerde de gerçekleştirilmelidir. Anahtar kelimeler: Sıvı organik gübre tüketimi, kimyasal gübre tüketimi, güzlük domates.
433
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
New Trend in Autumn Tomato Growing: Liquid Organic Fertilizer Consumption Hüseyin KALKAN1,*, Gafur GÖZÜKARA2, Mustafa KAPLAN2 1
2
Akdeniz University, Kumluca Vocational School, Antalya, Turkey Akdeniz University, Faculty of Agriculture, Department of Soil Science and Plant Nutrition, Antalya, Turkey *Responsible author e-mail:
[email protected]
Abstract The most important factors affecting crop quality and quantity in crop production are fertilizer applications. Fertilization also has a particular importance in terms of being sufficient and balanced for the grown plant. Fertilization applications are applied as chemical and organic fertilizer. The fact that the amount of organic matter in Turkey's soil is much inadequate and inadequate the importance of increasing use of liquid organic fertilizers in recent years. However, very limited data and information on the use of liquid organic fertilizer are included in the literature. Organic fertilization can improve the physical, chemical and biological properties of the soil and contribute to human health, positive impact on the environment and reduction of economic losses. This study carried out in 12 different producers where tomato growers in different locations of Antalya province were grown. Liquid organic and chemical fertilizer consumption of producer was realized without any intervention and has been recorded face to face. When the fertilizer application amounts of the producers are examined, it is estimated that the amount of usage between 0.00 ve 67.30 kg/da, use rates of liquid organic fertilizer changes between 0% and 29.04%. When the average liquid organic fertilizer consumption amounts are examined, 26.98 kg/da and average liquid organic fertilizer usage rates are determined as 13.55%. According to the results of the research, it is seen that the producers who continue their production activities by applying only chemical fertilizers in the past, nowadays have also increasingly applied liquid organic fertilizer applications. We predict that the rate of use of liquid organic fertilizers will increase between fertilizer applications in vegetable production. Such monitoring and evaluation practices should be carried out in other crops and in different regions. Key words: Liquid organic fertilizer consumption, chemical fertilizer consumption, autumn tomatoes.
434
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Domates Yetiştiriciliğinde Çiftlik Gübresi, Yeşil Gübre, Mikrobiyal Gübre Ve Bitki Aktivatörü Kullanımının Yaprakların Besin Elementi İçeriği Üzerine Etkisi Hüsnü ÜNLÜ1,*, Zeki GÖKTEKİN1 1
Süleyman Demirel Üniversitesi, Ziraat Fakültesi, Bahçe Bitkileri Bölümü, Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected]
Özet Tarımda birim alandan elde edilen verim miktarını artırmak amacıyla yoğun girdi kullanımı (kimyasal gübre, zirai ilaç, hormon vb.) söz konusu olmuştur. Yoğun girdi kullanımı verimde artışlar sağlarken çevre ve insan sağlığını olumsuz yönde etkilemiştir. Sonuçta da sürdürülebilir doğal dengenin olumsuz bir şekilde etkilenmesi söz konusu olmuştur. Çalışmada tarımda sürdürülebilirliği sağlayacak doğa ile uyumlu bitki besleme ürünleri kullanılarak domates yetiştiriciliği yapılması ve elde edilen bitkilerin yapraklarındaki besin elementi içeriklerinin belirlenmesi amaçlanmıştır. Deneme, Bölünmüş Parseller Deneme Desenine göre 3 tekerrürlü olarak dizayn edilmiştir. Denemede ana parselleri yeşil gübre, çiftlik gübresi ve kontrol üniteleri oluştururken; alt parselleri bitki aktivatörü (Crop-Set), mikrobiyal gübre (Bionem), bitki aktivatörü + mikrobiyal gübre (Crop-Set + Bionem), konvansiyonel ve kontrol uygulamaları oluşturmuştur. Çalışma sonucunda domates yapraklarındaki azot, fosfor, potasyum, kalsiyum, magnezyum, bor, demir, mangan ve çinko içeriklerinin organik madde uygulaması x uygulama interaksiyonuna göre sırasıyla % 3.70-4.57, % 0.27-0.42, % 3.18-3.73, % 3.434.39, % 0.43-0.58, 68.13-85.79 ppm, 170.40-275.00 ppm, 71.25-111.77 ppm ve 23.8031.94 ppm arasında değişim gösterdiği tespit edilmiştir. Çalışmada ayrıca domates yapraklarındaki azot, potasyum, magnezyum ve çinko değerlerinin kontrol uygulamalarına göre tüm organik madde uygulamaları ve uygulamalar ile birlikte artış gösterdiği saptanmıştır. Anahtar kelimeler: Domates, çiftlik gübresi, yeşil gübre, bitki aktivatörü, mikrobiyal gübre, beslenme durumu .
435
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Influence Of The Use Of Farm, Green And Microbial Manures And Plant Activators On The Minerals Content Of Leaves In Tomato Cultivation Hüsnü ÜNLÜ1,*, Zeki GÖKTEKİN1 1
Suleyman Demirel University, Agriculture Faculty, Horticulture Department, Isparta, Turkey *Responsible author e-mail:
[email protected]
Abstract The intense use of inputs (chemical fertilizers, agricultural pesticides, hormones etc.) in order to increase the yield per unit area has been observed in agriculture. While the intense use of inputs have increased the yield, it negatively influenced the environmental and human health. At the end, it has brought on the agenda the problem of negatively influenced sustainable natural balance. The objective of the study was to cultivate tomato with the use of plant nutritions providing sustainability in the agriculture and friendly to the nature, and to determine the nutrient contents of the leaves of plants obtained. The experiment was designed according to a split plot experimental design with three replications. In the experiment while the main plots were green manure, farm manure and control treatments, the sub plots were plant activator (Crop-Set), microbial fertilizer (Bionem), plant activator + microbial fertilizer (Crop-Set + Bionem), conventional and control treatments. At the end of the study, the nitrogen, phosphorus, potassium, calcium, magnesium, boron, iron, mangan and zinc contents of tomato leaves varied respectively between 3.704.57%, 0.27-0.42%, 3.18-3.73%, 3.43-4.39%, 0.43-0.58%, 68.13-85.79 ppm, 170.40275.00 ppm, 71.25-111.77 ppm and 23.80-31.94 ppm according to the organic matter treatment x treatments interaction. Moreover, in the study the nitrogen, potassium, magnesium and zinc values in the tomato leaves increased in all organic matter treatments and with the treatments as compared to the control treatments. Key words: Tomato, farm manure, green manure, plant activator, microbial fertilizer, nutritional status.
436
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Holstein Irkı İneklerde Kolostrum Kalitesini Etkileyen Bazı Faktörler ve Kolostrum Kalitesi ile Barındırma Şeklinin Buzağıların Büyüme Performansına Etkileri İbrahim Cihangir OKUYUCU1, Hüseyin ERDEM1,* Ondokuz Mayıs Üniversitesi Ziraat Fakültesi Zootekni Bölümü, Samsun, Türkiye *Sorumlu yazar e-posta:
[email protected]
1
Özet Bu çalışmada, Holstein ırkı ineklerin kolostrum kalitesi üzerine bazı çevresel faktörlerin etkilerini belirlemek ve kolostrum kalitesinin buzağılarda büyüme performansı üzerinde nasıl bir etki yarattığını ortaya koymak amaçlanmıştır. Araştırmada, 61 baş inek ve bu ineklerden doğan 38 erkek ve 23 dişi buzağı kullanılmıştır. Doğum, 24, 48 ve 72. saatlerde kolostrum kalitesi kolostrometre ile belirlenmiş ve ayrıca buzağıların doğum, 15, 30, 45 ve 60. günlerdeki canlı ağırlık ve bazı vücut ölçüleri tespit edilmiştir. Araştırmada laktasyon sırası ve buzağılama mevsiminin her dört dönem için de kolostrum kalitesi üzerine istatistiki anlamda etki etmemiştir. Doğum, 24, 48 ve 72. saatteki kolostrometre değerlerinin sırasıyla 1,058±0,0013 g/ml; 1,042±0,0012 g/ml; 1,031±0,0007 g/ml ve 1,027±0,0004 g/ml olduğu, ancak kolostrum kalitesinin buzağıların büyüme performansı üzerinde herhangi bir etki yaratmadığı tespit edilmiştir. Bireysel barındırılanların grup halinde barındırılanlardan 15 günlük yaş dönemindeki CA (P<0.05) ve GG (P<0.01) önemli ölçüde yüksek bulunmuştur. Bireysel kulübelerde yetiştirilen buzağıların 15. gün CA ortalamaları 51.04±0.981 kg, grup halinde yetiştirilenlerin ise 47.82±0.991 kg olarak belirlenmiştir. Bunun yanında barındırma şeklinin özellikle 45 ve 60. günlerde CA, GÇ, CY, ve GG üzerinde etkili olduğu tespit edilmiştir. Ayrıca söz konusu faktörün doğum-60. günler arasında canlı ağırlık artışlarını da etkilediği, en yüksek toplam (33,27±1,195 kg) ve günlük (0,555±0,0199 kg) ağırlık artışlarının bireysel kulübelerde yetiştirilen buzağılarda belirlendiği gözlemlenmiştir. Grup halinde barındırılan buzağıların toplam ve günlük ağırlık artışları ise sırasıyla 29,05±1,481 kg ve 0.484±0.0247 kg olarak bulunmuştur. Anahtar kelimeler: Holstein, kolostrum, buzağı, büyüme, barındırma.
437
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Some Non-Genetıc Factors Affecting Colostrum Quality in Holstein Cows and Effects of Barning Type And Colostrum Quality on Growth Performance of Calves İbrahim Cihangir OKUYUCU1, Hüseyin ERDEM1,* 1
Department of Animal Science, Faculty of Agriculture, University of Ondokuz Mayis, 55139- Samsun, Turkey *Responsible author e-mail:
[email protected]
Abstract The objectives of this study were to determine the effects of some environmental factors affecting colostrum quality (CQ) and to reveal the effects of CQ on growth performance of Holstein calves. In total, 61 cows and their calves (38 male and 23 female) were used as study material. While CQ was determined by a colostrometer at birth, 24th, 48th and 72nd h, live weight and some body measurements were recorded at 15th, 30th, 45th and 60th days. No significant effect of parity and season of calving on CQ was found. Colostrometer values for four different times were obtained to be 1.058±0.0013 g/ml, 1.042±0.0012 g/ml, 1.031±0.0007 g/ml and 1.027±0.0004 g/ml, respectively, but CQ not affected growth performance of calves. In evaluation of barning type, live weight (LW) and chest depth (CD) means for 15th d were found to be higher (P<0.05 and P<0.01, respectively) in calves barned as individual when compared to calves in group barning. 15th d LW means of calves for individual and group barning were calculated to be 51.04±0.981 kg and 47.82±0.991 kg, respectively. Besides, barning type significantly affected LW, chest girth (CG), withers height (WH) and chest width (CW). Calves barned in individual boxes reached to highest total (33.27±1.195 kg) and daily live weight gain (0.555±0.0199 kg) between birth and 60th d. At this time, total and daily weight gains of calved barned as groups were calculated to be 29.05±1.481 kg and 0.484±0.0247 kg, respectively. Key words: Holstein, colostrum, calf, growth, barning.
438
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Holstein Irkı Buzağılarda İçirilen Sütün Bazı Bileşenlerinin Büyüme Performansı Üzerine Etkileri İbrahim Cihangir OKUYUCU1, Hüseyin ERDEM1,* Ondokuz Mayıs Üniversitesi Ziraat Fakültesi Zootekni Bölümü, Samsun, Türkiye *Sorumlu yazar e-posta:
[email protected]
1
Özet Bu araştırmanın amacı, Holstein buzağıların büyüme performansı üzerine bazı süt bileşiklerinin etkilerini belirlemektir. Araştırma materyali olarak toplam 61 inek ve bu ineklerden doğan buzağılar (38 erkek 23 dişi) kullanılmıştır. Doğumdan sonraki 15, 30, 45 ve 60. günlerde ineklerden alınan süt örnekleri kuru madde (KM), yağ, protein ve laktoz oranlarını belirlemek için analiz edilmiştir. Parametrelerle ilgili dört ölçümün aritmetik ortalamaları sırasıyla % 11.06, % 3.24, % 2.81 ve % 3.84 olarak hesaplanmıştır. Araştırmada, içirilen sütteki yüksek KM oranının her dört dönem için de buzağıların CA, GÇ, GG ve GD üzerine pozitif yönde etkili olduğu (P<0.01), ayrıca 15. günde CY ve canlı ağırlık artışı (CAA) üzerine de aynı etkiyi yarattığı belirlenmiştir. Yağ oranındaki artış tüm dönemlerde CA, GÇ ve GD, 15. günde CAA, SY, VU üzerinde pozitif yönde önemli etki yaratmıştır. Laktoz ve protein oranlarının ise 15 ve 30. günlerde GG (P<0,05), 45. günde CAA (P<0,01), 60. günde ise GÇ (P<0,05) üzerinde etkili olduğu belirlenmiştir. Araştırmada 60. günde belirlenen toplam canlı ağırlık artışı (TCAA) ve günlük canlı ağırlık artışı (GCAA) sırasıyla 31,69±0,968 kg ve 0,53±0,016 kg olarak belirlenmiştir. Bu değerler üzerine her dört süt bileşeni de etkili olurken, yüksek düzeyde yağ içeren sütle beslenen buzağılarda TCAA ve GCAA sırasıyla 34,86±1,103 kg ve 0,58±0,018 kg, düşük düzeyde yağ oranına sahip sütle beslenen buzağılarda ise aynı sırayla 29,01±1,326 kg ve 0,48±0,022 kg olarak belirlenmiştir. Anahtar kelimeler: Holstein, süt bileşeni, buzağı, büyüme performansı.
439
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Effects of Some Milk Compounds on Growth Performance of Holstein Calves İbrahim Cihangir OKUYUCU1, Hüseyin ERDEM1,* 1
Department of Animal Science, Faculty of Agriculture, University of Ondokuz Mayis, 55139- Samsun, Turkey *Responsible author e-mail:
[email protected]
Abstract The aim of this investigation was to determine the effects of some compounds of milk on growth performance of Holstein calves. In total, 61 cows and their calves (38 male and 23 female) born from these cows were used to be study material. Milk samples collected from cows were analyzed by dry matter (DM), fat, protein and lactose in the 15th, 30th, 45th and 60th days after calving. The arithmetic means of the parameters by four measures were calculated to be 11.06%, 3.24%, 2.81% and 3.84%, respectively. Live weight (LW), withers height (WH), body length (BL), chest depth (CD), chest width (CW), chest girth (CG) and rump height (RH) were measured at 15th, 30th, 45th and 60th days. DM affected (P<0.01) LW, CD, CW and CG for all periods, and affected (P<0.01) WH and LW for 15th day. Milk samples with higher F positively affected LW, CG and CD for all periods and affected LW, RH and BL for 15th day. Lactose and protein affected CW (P<0.05) at 15th and 30th days, LW (P<0.01) at 45th day and CG (P<0.05) at 60th day. Total (TLWG) and daily live weight gain (DLWG) at 60th day were found as 31.69±0,968 kg and 0.53±0.016 kg, respectively. While all compounds were effective on these values, calves fed with high fat had 34.86±1.103 kg TLWG and 0.58±0.018 kg DLWG and calves fed with low fat had 29.01±1.326 kg TLWG and 0.48±0.022 kg DLWG. Key words: Holstein, milk composition, calf, growth performance.
440
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Arkeolojik Eserlerin 3d Lazer Tarayıcılar ile Modellenmesi, Belgelenmesi ve Arşivlenmesi İbrahim KIRBAŞ1,*, Sualp DENİZ1, Serkan ÖKTEM1 Mehmet Akif Ersoy Üniversitesi Teknik Bilimler Meslek Yüksekokulu, Burdur, Türkiye *Sorumlu yazar e-posta:
[email protected]
1
Özet Ülkemiz tarihinde birçok medeniyete ev sahipliği yapmış; farklı uygarlıkların, farklı kültürlerin hüküm sürdüğü, kültürel açıdan son derece zengin olan bir coğrafyada yer almaktadır. Bu sebeple ülkemizde çok sayıda tarihi eser bulunmaktadır. Bu tarihi eserlerin belgelenmesi ve arşivlenmesi çok önemlidir. Son yıllara kadar tarihi eserlerin belgelenmesinde kullanılmakta olan klasik yöntemler (Rölöve vb.) kullanılmaktadır. Rölöve bir tarihi eserin, arkeolojik kalıntının yakından incelenmesi, belgelenmesi, arşivlenmesi, mimarlık/sanat tarihi açısından değerlendirilmesi için önemlidir. Rölöve tarihi eserlerin ölçüldüğü andaki durumunu gösterir. Orjinal eser üzerindeki aşınmaları, ilaveleri, kırılmış kısımları aynen ölçülerek çizimlerde belirtilir. Antik kazılarda bulunan eserlerin klasik yöntemler kullanılarak belgelenmesi uzun sürmektedir. Ayrıca klasik yöntemlerdeki uzun zamana yayılan çalışmalar ve belgelemeler de hata payı yüksek olmaktadır. Bu yüzden gelişen teknolojiden de faydalanılarak arkeolojik bulguların belgelenmesi, envanterlerinin çıkarılması ve saklanması günümüzde dijital ortamda daha kolay olmaktadır. Bilgisayar ortamında elde edilen veriler kullanılarak tarihi eser üzerindeki ölçme işlemleri daha sağlıklı yapılmaktadır. Elde edilen veriler ile röleve çizimleri daha kısa sürede çizilebilmektedir. Bilgisayar ortamına aktarılacak olan veriler sadece birer resimden ibaret değildir. Tamamen 3 boyutlu, her açıdan ve doğrultudan incelenmeye olarak sağlayan, eserin tüm detaylarını ortaya koyabilen, yüksek çözünürlüklü katı modellenmiş veya yüzey modellenmiş nesnelerdir. Bu nedenle kazı alanlarında bulunan, antik dokuya sahip mimari yapıların, heykel, seramik gibi küçük eserlerin belgelenmesinde dijital belgeleme sistemi olarak adlandırabileceğimiz 3d lazer tarama teknolojileri kullanılmalıdır. 3d lazer tarama ile elde etiğimiz CAD dataları sayesinde eser üzerindeki kırılmış, aşınmış ve yıpranmış bölgelerin orijinaline uygun olarak tamamlanmasına olanak sağlamaktadır. Aynı zamanda bu düzenleme işlemi oldukça kısa sürede yapılabilmektedir. Mehmet Akif Ersoy Üniversitesi tarafından yapılan Kibrya Antik Kenti kazılarında ortaya çıkarılan arkeolojik eserlerin 3 boyutlu lazer tarayıcı ile bilgisayar ortamına aktarılmıştır. Bilgisayar ortamında yapılan düzenlemeler ve görselleştirmeler ile arkeolojik eserlerin bir envanteri oluşturmuştur. Anahtar kelimeler: Arkeoloji, Lazer tarama, Belgeleme, Arşivleme.
441
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Modelling, Documentation and Archiving of Archaeological Artifacts Using 3D Laser Scanners İbrahim KIRBAŞ1,*, Sualp DENİZ1, Serkan ÖKTEM1 1
Mehmet Akif Ersoy University Vocational School of Technical Sciences, Burdur, Turkey *Responsible author e-mail:
[email protected]
Abstract Our country that hosted many nationalities in its history is situated in a geographical region that is rich in culture, where different civilizations, different cultures dominate. Therefore, a great number of historical artifacts are available in our country and it is very crucial to document and archive all these historical artifacts. Until recently, classical methods (i.e. surveying) have been used in the documentation of historical artifacts. Surveying is significant for historical artifacts and archaeological remains to be closely examined, documented, and archived, also evaluated in terms of architectural/art history. Surveying shows the situation in which historical artifacts are measured. The abrasions, additions, broken parts on the original work are exactly measured in the drawings. It takes a long time to document the artifacts found in archaeological excavation by using classic methods. In addition, long-term studies and documentation in classic methods result in high margin of error. For this reason, documentation of archaeological finds, extraction and hiding of inventories by using the developing technology is easier in digital media today. By using data obtained via computer environment, the measurement procedures of historical artifacts are done more healthily. Drawings of the surveying with obtained data can be drawn in a shorter time. The data which is transferred to the computer is not just a picture. It is a high-resolution solid modeled or surface modeled object that is completely 3-dimentional, allowing to examine all aspects of the work, allowing it to be examined from any angle and from any direction. Therefore, 3D laser scanning technology that can be called as the documentation system should be utilized in order to documenting has been utilized as digital documentation system in order to document architectures found excavation area and small architectural structures such as sculpture, ceramic. CAD data gained by 3D laser scanning technology enables the completion of broken, worn, abraded parts on architecture in accordance with original. Also, this editing process can be done in a very short time. Archaeological artifacts revealed in the excavations of Kibyra Antique City carried by Mehmet Akif Ersoy University were transferred to computer environment via 3D laser scanner. Inventory of archaeological artifacts was created as a result of organization and visualization in computer environment. Key words: Archaeology, Laser scanning, Documentation, Archiving.
442
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
E-Beam Tekniği ile üretilmiş CdIn2Te4/CdS İnce Film Güneş Pillerinin Elektriksel Özellikleri İbrahim KIRBAŞ1,*, Rasim KARABACAK2, Duygu TAKANOĞLU3, Koray YILMAZ3
2
1 Mehmet Akif Ersoy Üniversitesi Teknik Bilimler Meslek Yüksekokulu, Burdur, Türkiye. Pamukkale Üniversitesi Mühendislik Fakültesi Makine Mühendisliği Bölümü, Denizli, Türkiye. 3 Pamukkale Üniversitesi Fen ve Edebiyat Fakültesi Fizik Bölümü, Denizli, Türkiye. * Sorumlu yazar e-posta:
[email protected]
Özet
Bu çalışmada Elektron Demeti Buharlaştırma (E-beam) tekniği ile biriktirilmiş CdIn2Te4/CdS ince film güneş pillerinin elektriksel özelliklerine tavlamanın etkisi incelendi. İnce film güneş pilleri için alttaş olarak İndiyum kalay oksit (ITO) kaplı cam kullanıldı. Güneş pili absorber tabakası (CdIn2Te4) azot ortamında 400 oC de 1 saat tavlama yapıldı. Daha sonra pencere tabakası Kadmiyum Sülfür (CdS) biriktirilerek güneş pili oluşturuldu. Üretilen ince film güneş pillerinin elektriksel özellikleri incelemek için solar simülatör ile karanlık ve ışık altında ölçümler yapıldı. İnce film güneş pillerine ait IV eğrileri incelendiğinde ise elektriksel iletkenliğin tavlama ile arttığı belirlenmiştir. Anahtar kelimeler: İnce film güneş pili, E-beam, II–VI yarıiletkenler, Elektriksel özellikler.
443
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Electrical Properties of CdIn2Te4/CdS Thin Film Solar Cells Produced by the E-Beam Technique İbrahim KIRBAŞ1,*, Rasim KARABACAK2, Duygu TAKANOĞLU3, Koray YILMAZ3 1Mehmet Akif Ersoy Üniversitesi Teknik Bilimler Meslek Yüksekokulu, Burdur, Türkiye. 2Pamukkale Üniversitesi Mühendislik Fakültesi Makine Mühendisliği Bölümü, Denizli, Türkiye. 3Pamukkale Üniversitesi Fen ve Edebiyat Fakültesi Fizik Bölümü, Denizli, Türkiye. * Responsible author e-mail:
[email protected]
Abstract
In this study, the effect of annealing to the electrical properties of CdIn2Te4/CdS thin film solar cells deposited by electron beam evaporation (E-beam) technique was investigated. Indium Tin Oxide (ITO) coated glass was used as a substrate for thin film solar cells. The solar cell absorber layer (CdIn2Te4) was annealed at 400 °C for 1 hour in nitrogen atmosphere. Then, the window layer Cadmium Sulfur (CdS) was deposition and the solar cell was formed. Dark and light measurements were made with a solar simulator to examine the electrical properties of the thin film solar cells produced. When the I-V curves of thin film solar cells are examined, it is determined that the electrical conductivity is increased by annealing. Key words: Thin films solar cells, E-beam, II–VI semiconductors, Electrical properties.
444
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürdürülebilir Tarım için Süper Absorban Polimerlerin (SAP) Taflan (Euonymus Japonicus Aureo-Marginatus) Bitkisinde Toprak Neminin Korunmasındaki Etkisinin İncelenmesi İdris KARAGÖZ1,*, Gül YÜCEL2, Mustafa ÖKSÜZ3 Yalova Üniversitesi, Yalova Meslek Yüksekokulu, Yalova, Türkiye Yalova Üniversitesi, Yalova Meslek Yüksekokulu, Yalova, Türkiye 3 Yalova Üniversitesi, Mühendislik Fakültesi, Polimer Mühendisliği, Yalova, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2
Özet Dünya ölçeğinde her geçen gün su kaynaklarının azalması, sürdürülebilir tarım ve bitki yetiştiriciliğinde suyun ekonomik kullanılması konusundaki alternatif çalışmaları ön plana çıkarmaktadır. Süper absorbent polimerler (SAP), su tutucu özelliği nedeniyle son yıllarda özellikle tarım sektöründe yoğun bir şekilde kullanılmaktadır. Bu çalışmada SAP malzemeler kullanılarak ülkemizde yıllık tüketimi 3.000.000 adetten yüksek olan ve peyzaj tasarım çalışmalarında yaygın olarak kullanılan taflan (Euonymus japonicus Aureo-marginatus) bitkisi üzerindeki etkileri belirlenmeye çalışılmıştır. Bu kapsamda farklı oranlarda (0,8 / 1,0 ve 1,2 gr.) SAP malzemeler, 1,5 lt’ lik saksılarda torf ile karıştırılarak deneme grubu oluşturulmuştur. SAP katılmamış kontrol grubu ile deneme grubundan elde edilen veriler karşılaştırılmıştır. Sulama öncesi ve sonrası toprak nem düzeyi ölçümleri yapılmış ve sonuçlar değerlendirilerek SAP malzemelerin toprak neminin korunmasındaki etkileri belirlenmeye çalışılmıştır. Toprak nem dengesi üzerinde SAP malzemenin etkili olduğu ve toprakta SAP malzeme miktarının artmasıyla, SAP tarafından tutulan su miktarının arttığı tespit edilmiştir. Nem düzeyi ölçümlerine göre 0,8 gr SAP katkılı ortamda toprak neminin diğer ortamlara göre azaldığı, 1,2 gr SAP katkısı olan ortamda nem dengesinin diğerlerine oranla daha uzun süre korunduğu gözlemlenmiştir. Ortamdaki nem düzeyinin değişimine bağlı olarak, SAP oranı 0,8 gr olan ortamda suya erişim için daha fazla kök gelişimi olduğu, 1,2 gr SAP katkısı olan ortamlarda ise kök gelişiminin diğer ortamlara göre daha az olduğu belirlenmiştir. Ancak buna karşı bitkideki boylanmanın ve budama sonrası sürgün ağırlığının artmış olduğu gözlemlenmiştir. SAP’ lerin tarım sektöründe kullanımının bitki gelişimi üzerinde etkili olduğu ve gelecekte kullanımın daha da artacağı düşünülmektedir. Teşekkür: Yazarlar 2016/AP/138 numaralı proje ile çalışmaya verdikleri destek için Yalova Üniversitesi, BAPKO Birimine teşekkür eder. Anahtar kelimeler: Süper Absorbent Polimerler, Taflan, Euonymus japonicus Aureo-marginatus, Toprak Neminin Korunması, Bitki gelişimi, Sürdürülebilir Tarım.
445
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Examination of the Effect of Super Absorbent Polymers for Sustainable Agriculture on Soil Moisture in Spindle Plant (Euonymus Japonicus Aureo-Marginatus) İdris KARAGÖZ1,*, Gül YÜCEL2, Mustafa ÖKSÜZ3 1
Yalova University, Yalova Vocational School, Yalova, Turkey Yalova University, Yalova Vocational School, Yalova, Turkey 3 Yalova University, Faculty of Engineering, Polymer Engineering, Yalova, Turkey *Responsible author e-mail:
[email protected] 2
Abstract The decrease in the water resources with each passing day on a world scale brings the alternative studies on the economic use of water in Sustainable agriculture and plant growing to the forefront. Super absorbent polymers (SAP) have been intensively used especially in the agricultural sector in recent years due to their water retention characteristic. In this study, it was attempted to determine the effects of SAP materials on the spindle plant (Euonymus japonicus Aureo-marginatus) the annual consumption of which in our country is higher than 3.000.000 and which is frequently used in landscape design studies by using SAP materials. Within this context, an experimental group was created by mixing SAP materials in different ratios (0.8 / 1.0 and 1.2 gr) with peat in 1.5-litre flower pots. The data obtained from the control group in which SAPs were not added and the experimental group were compared. The soil moisture level measurements were performed before and after watering and by evaluating the results, it was attempted to determine the effects of SAP materials on maintaining soil moisture. It was determined that SAP material was effective on the soil moisture balance and with the increase in the amount of SAP material in the soil, the amount of water retained by SAP increased. According to the moisture level measurements, it was observed that, in an environment to which 0.8 gr of SAP was added, the soil moisture decreased in comparison to the other environments, in an environment to which 1.2 gr of SAP was added, the moisture balance could be maintained for a longer time in comparison to others. It was determined that, depending on the change in the moisture level in the environment, there was more root development in the environment in which the SAP ratio was 0.8 gr due to the access to water, and in the environment to which 1.2 gr of SAP was added, it was determined that root development was less when compared to other environments. However, despite this, it was observed that the growth in the plant and shoot weight after pruning increased. It is thought that the use of SAPs in the agricultural sector is effective on the plant growth and its use will increase in the future. Acknowledgements: The authors would like to thank Yalova University, BAPKO Department for the support of the study with the project numbered 2016/AP/138. Key words: Super Absorbent Polymers, Spindle, Euonymus japonicus Aureo-marginatus, Maintaining Soil Moisture, Plant growth, Suistinable Agriculture.
446
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Ters Faz Sıvı Kromatografi Yöntemiyle Tofasitinib için Termodinamik Özelliklerin Belirlenmesi İkbal Demet NANE1,*, Hülya ORTAK1, Ebru ÇUBUK DEMİRALAY1 Süleyman Demirel Üniversitesi, Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
Özet Romatoid artrit (RA), eklemlerde sertlik, şişlik ve fonksiyon kaybına neden olan otoimmün bir hastalık olup, inflamatuvar eklem hastalıklarının en sık görülen tipidir. RA tedavisinde, büyük devrim olarak nitelendirilen hastalık modifiye edici antiromatizmal ilaç (DMARD)’lar kullanılmaktadır. Sınıfının ilk ve tek üyesi, hedefe yönelik sentetik DMARD olarak adlandırılan tofasitinib küçük moleküllü olup RA tedavisine farklı bir yaklaşım getirmiştir. Ayrıca etki mekanizması açısından yeni ilaçların öncüsü olacaktır. Tofasitinib, hücre yüzeyi yerine hücrelerin sitoplazmasında yer alan, non-reseptör protein tirozin kinaz ailesinden olan JAK sinyal iletimini engellediği için sitokin üretimini ve sinovyal dokuda immün hücrelerin birikimini azaltır. Bu durum inflamatuar yanıtı ve eklem hasarını baskılar. Böylece RA’ da etkin hastalık kontrolü sağlar. Ters faz sıvı kromatografi ayırma biliminde yaygın olarak kullanılmaktadır. Bu yöntemde sıcaklığın etkisinin incelendiği çok sayıda çalışma vardır. Sıcaklık, kromatografik ayırmalarda önemli bir rol oynar, çünkü kolon sıcaklığı analiz zamanının azaltılmasında, alıkonmanın modifiye edilmesinde, seçiciliğin kontrolünde önemli bir role sahiptir. Sıvı kromatografide ~ 5 °C kolon sıcaklığındaki değişiklik, çözücü bileşiminde % 1'lik değişiklikle aynı etkiye sahiptir. Bu çalışmada, ters faz sıvı kromatografi yöntemiyle yeni jenerasyon HPLC kolonda tofasitinibin alıkonma davranışı üzerine mobil faz bileşimi (asetonitril-su) ve sıcaklığın etkisi incelenmiştir. Tofasitinibin alıkonma zamanı üzerine sıcaklığın etkisi 2545 oC aralığında, 30:70 (v/v%) asetonitril: su ikili karışımında belirlenmiştir. Bu sıcaklık aralığında, mobil fazda tofasitinibin iyonlaşma prosesi için termodinamik nicelikler (ΔH o, ΔSo ve ΔGo) In Ka-1/T grafiğinden elde edilen eğim ve kesimden hesaplanmıştır. Anahtar kelimeler: Romatoid Artrit, Tofasitinib, RPLC, Janus Kinaz, Termodinamik Nicelik.
447
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Determination of Thermodynamic Properties for Tofacitinib by Reversed Phase Liquid Chromatography İkbal Demet NANE1,*, Hülya ORTAK1, Ebru ÇUBUK DEMİRALAY1 1
Suleyman Demirel University, Isparta, Turkey *Responsible author e-mail:
[email protected]
Abstract Rheumatoid arthritis (RA) is an autoimmune disease that causes stiffness, swelling and loss of function in joints and is the most common type of inflammatory joint disease. In the treatment of RA, disease-modifying antirheumatic drugs (DMARDs), which are considered to be major revolutions, are used. The first and only member of the class, the targeted DMARD, called tofacitinib, is a small molecule and has a different approach to RA treatment. It will also pioneer new medicines in terms of its mechanism of action.Tofacitinib reduces cytokine production and accumulation of immunocytes in the synovial tissue because it inhibits JAK signal transduction from the non-receptor protein tyrosine kinase family, located in the cytoplasm of cells, rather than on the cell surface. This suppresses the inflammatory response and joint damage. Thus providing effective disease control in RA. Reversed phase liquid chromatography (RPLC) has been extensively used in separation science. There have been numerous studies of the temperature effect on solute retention in RPLC. The temperature plays an important role in chromatographic separations because column temperature can play a role in reducing analysis time, modifying retention, controlling selectivity. The change in column temperature at ~ 5 ° C in liquid chromatography has the same effect as the 1% change in solvent composition. In this study, the effect of temperature and mobile phase composition (acetonitrilewater) on the retention behaviour of tofacitinib on new generation core shell HPLC column in reversed-phase liquid chromatography has been investigated. The effect of temperature on the retention time of tofacitinib was investigated in the temperature range 25-45°C with a mobile phase that was 30:70 (v/v%) acetonitrile: water binary mixture. In this temperature range, the thermodynamic quantities (ΔHo, ΔSo ve ΔGo) for the dissociation process of tofacitinib in the mobile phase were calculated from the slope and intercept obtained from the In Ka-1/T plot. Key words: Rheumatoid Arthritis, Tofacitinib, RPLC, Januz Kinaz, Thermodynamic Quantities.
448
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sinnarizinin Metot Optimizasyonu için Asetonitril-Su İkili Karışımlarındaki Kromatografik Davranışının Belirlenmesi İkbal Demet NANE1,*, Zehra ÜSTÜN1, Ebru ÇUBUK DEMİRALAY1 Süleyman Demirel Üniversitesi, Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
Özet Sinnarizin, antihistaminik, sedatif ve kalsiyum kanal blokaj aktivitesine sahip bir piperazin türevidir. Bulantı, baş dönmesi, araç tutması ve serebral vasküler bozuklukların semptomatik tedavisinde kullanılır. Yapılan literatür incelemesi sonucunda sinnarizine ait az sayıda bilimsel literatür olduğu görülmüş ve sinnarizinin ters faz sıvı kromatografi (RPLC) yöntemi ile hem tek başına hem de farmasötik formülasyondaki veya biyolojik sıvılardaki diğer ilaçlarla birlikte tayin edilebildiği ortaya konmuştur. Bunun yanı sıra, sinnarizinin farmasötik formülasyondaki kromatografik davranışı kullanılarak yapılan optimizasyon çalışmasına dair hiçbir kaynak bulunamamıştır. Bu çalışmanın farkı ise, asetonitril içeriğinin ve mobil faz pH'ının, sinnarizinin alıkonma davranışı üzerine kombine etkisinin kullanılmış olmasıdır. Bu çalışmada, sinnarizinin farmasötik dozaj formundaki kantitatif tayini için hassas bir RPLC yöntemi geliştirilmiştir. Çalışılan bileşiğin tayini için geliştirilen RPLC metodu Gemini C18 (150x4,6 mm I.D., 5m) kolon kullanılarak 30oC’ de yürütülmüştür. Mobil faz pH’ının analitin alıkonmasına etkisi %45 (h/h) asetonitril-su ikili karışımı kullanılarak incelenmiştir. Kantitatif tayin için iç standart olarak dikloksasilin seçilmiştir. Mobil fazdaki asetonitril bileşimi %45 (h/h) ve pH 3,25 olduğunda, tüm analitler yaklaşık 4 dakikalık bir analiz süresinde ayrılmıştır. Mobil fazın akış hızı 1.0 mL/dakika olarak belirlenmiş ve tayin 252 nm’de yürütülmüştür. Sinnarizin için 3-12 µg/mL derişim aralığında doğrusallık elde edilmiştir. Çalışılan bileşik için dedeksiyon limiti (LOD) ve kantifikasyon limiti (LOQ) sırasıyla 0,691 µg/mL ve 2,096 µg/mL olarak bulunmuştur. Yüksek geri kazanım ve düşük bağıl standart sapma değerleri, metodun sinnarizinin farmasötik dozaj formundan tayini için oldukça uygun olduğunu kanıtlamaktadır. Anahtar kelimeler: Sinnarizin, kromatografik davranış, metot optimizasyonu, RPLC, asetonitril-su ikili karışımları.
449
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Identification of Chromatographic Behaviour in Acetonitrile-Water Binary Mixture for Method Optimization of Cinnarizine İkbal Demet NANE1,*,Zehra ÜSTÜN1, Ebru ÇUBUK DEMİRALAY1 1
Suleyman Demirel University, Isparta, Turkey *Responsible author e-mail:
[email protected]
Abstract Cinnarizine is a piperazine derivative with antihistaminic, sedative and calciumchannel blocking activity. It is used for the symptomatic treatment of nausea, vertigo, treatment of motion sickness and cerebral vascular disorders. Literature review shows that cinnarizine can be determined by reversed phase liquid chromatography (RPLC) method and either alone or in combination with other drugs in pharmaceutical formulation or in biological fluids, few reports can be found in the scientific literature for chromatographic determination of cinnarizine. However, no references have been found for optimization study using chromatographic behaviour of cinnarizine in pharmaceutical formulation. The difference of this study, combined effect of acetonitrile content and pH of the mobile phase on the retention behavior of cinnarizine was used. In the present work, sensitive RPLC method been developed for the quantitative estimation of cinnarizine in pharmaceutical dosage form. An improved RPLC method for estimation of studied drug was carried on Gemini C18 (150x4,6 mm I.D., 5m) column at 30oC. The influence of mobile phase pH on analyte retention was examined in 45% (v/v) acetonitrile-water binary mixture. Dicloxacillinwas selected as an internal standard for quantitative determination. It can be achieved when the acetonitrile content in the mobile phase is 45% (v/v) at pH 3.25, in which all solutes are well separated in an analysis time of about 4 min. The mobile phase was pumped at flow rate of 1.0 mL/min and the detection was carried out at 252 nm. The linearity was found to be in the range of 3-12 µg/mL for cinnarizine. The limit of detection (LOD) and limit of quantification (LOQ) values for studied compound were found to be 0.691µg/mL and 2.096 µg/mLrespectively. The high recovery and low relative standard deviation confirm the suitability of the method for determination of cinnarizine in pharmaceutical dosage form. Key words: Cinnarizine, chromatographic behaviour, method optimization, RPLC, acetonitrile-water binary mixtures.
450
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Kısıtlı Sulama Koşullarında Putresin Uygulamalarının Bitki Büyüme Ve Gelişmesi Üzerine Etkileri İlhami TOZLU1,*, Duygu Misrakli1, Nafiye ADAK2 Akdeniz Universitesi,Ziraat Fakültesi Bahçe Bitkileri Bölümü, Antalya
1
2Akdeniz Universitesi, Teknik Bilimler Meslek Yüksek Okulu, Antalya *Sorumlu yazar e-posta:
[email protected]
Özet Poliaminler, bitkiler, hayvanlar ve mikroorganizmalarda bulunan küçük alifatik aminlerdir. Putresin, spermidin ve spermin, bitkilerdeki başlıca poliamin olup, hücre çoğalma, büyüme, morfogenez ve farklılaşma gibi çeşitli süreçlerde yer alırlar. Dışarıdan poliamin uygulaması, bitkilerin stres toleransını arttırmak ve sonuçta bitki verimliliğini arttırmak için uygun ve etkili bir yaklaşımdır. Bu çalışmada, topraksız ortamdaki (torf + perlit) iki farklı çilek çeşidinde (Festival, Osmanli), iki farklı sulama rejimi (Kontrol: %30 drenaj; Kısıtlı sulama: %15 drenaj) ve üç farklı putresin konsantrasyonuun (0, 250 ppm ve 500 ppm) bitki büyüme ve gelişimi üzerine etkileri incelenmiştir. İncelenen kriterler gövde çapı, gövde sayısı, yaprak sayısı, yaprak oransal su içeriği, turgorite kaybı, membran geçirgenliği, klorofil indeksi, yaprak sıcaklığı, uç yanıklığı ve yaprak alanı indeksidir. Araştırma sonucunda, kısıtlı sulama uygulamasında putresin uygulamalarını bitki büyüme ve gelişimini pozitif olarak etkilemiştir. Nitekim kısıtlı sulama koşullarında, en yüksek gövde çapı, gövde sayısı, yaprak oransal su içeriği ve membran geçirgenliği, 250 ppm putresin uygulamasında belirlenmiştir. Ayrıca kısıtlı sulama koşullarında 500 ppm putresin uygulamasında, en az uç yanıklığı oranı saptanmıştır. Anahtar kelimeler: Fragaria x ananassa, topraksız, morfo-fizyolojik özellikler.
451
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Effect Of Putrescine On Growth And Development Of Strawberry Plants Grown In Soilless Conditions With Restricted Deficit Irrigation İlhami TOZLU1,*, Duygu Misrakli1, Nafiye ADAK2 1
Akdeniz University, Faculty of Agriculture, Department of Horticulture, Antalya, Turkey 2 Akdeniz University, Vocational Higher School of Technical Sciences, Antalya, Turkey *Responsible author e-mail:
[email protected]
Abstract Polyamines are small aliphatic amines that are ubiquitous in plants, animals and microorganisms. Putrescine, spermidine and spermine are the major polyamine in plants and they are involved in various processes such as cell proliferation, growth, morphogenesis, and differentiation. Exogenous polyamine application is a convenient and effective approach for enhancing the stress tolerance of crops and eventually improving crop productivity. In this research, growth and development (crown diameter, crown number, leaf number, leaf relative water content, loss of turgidity, membrane permeability, chlorophyll index, leaf temperature, tip burn, leaf area index) of two strawberry cultivars (Festival, Osmanli) grown in soilless conditions with two different irrigation regimes (Control 30% drainage; deficit irrigation 15% drainage) and treated with three different putrescine concentrations (0, 250, 500 ppm) were investigated. Growth and development of plants under deficit irrigation had positively affected by putrescine application. As a matter of fact, the largest crown diameter and the highest crown number, leaf relative water content and membrane permeability were obtained from 250 ppm putrescine applied plants under deficit irrigation. In addition, the least tip burn rate was recorded on 500 ppm putrescine treated plants under water deficit. Key words: Fragaria x ananassa, soilless, morpho-physiological characteristics.
452
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Benzinli Motorda Termoelektrik Jeneratörü Yardımıyla Egzoz Gazı Isı Enerjisinin Geri Kazanımı İlker TEMİZER1,*, Tahsin YÜKSEL2, İbrahim CAN3 Cumhuriyet Üniversitesi Teknoloji Fakültesi, Sivas, Türkiye Cumhuriyet Üniversitesi Teknoloji Fakültesi, Sivas, Türkiye 3 Cumhuriyet Üniversitesi Teknoloji Fakültesi, Sivas, Türkiye *Sorumlu yazar e-posta:
[email protected] 1 2
Özet Motorlarda egzoz sistemine dayalı atık enerji geri kazanımlı bir sistemin kurulması halinde enerjinin sürekliliği sağlanacak ve çevresel boyutta sera gazı salınımları azaltılacaktır. Bu doğrultuda termoelektrik jeneratörlerin ürettiği elektrik enerjisi ile alternatörlerin ürettiği enerjinin bir bölümünü karşılayabilecek etkiye sahip olabileceğine inanılmaktadır. Termoelektrik, sıvı ya da katı maddelerin sıcaklıklarına bağlı olarak malzemeler üzerinde oluşan elektriksel potansiyeli inceleyen bilim dalıdır. Aynı zamanda termoelektrik, ısı enerjisinin elektrik enerjisine veya elektrik enerjisinin ısı enerjisine dönüşümüdür. Bu çalışmada, alüminyum 6061 yapıdan oluşturulan yapı üzerine yerleştirilmiş 20 adet termoelektrik modülün elektriksel olarak seri bağlandığı bir prototip, termoelektrik jeneratör çalışma prensiplerine uygun olarak geliştirilmiştir. Motor 1000, 1250, 1500, 1750, 2000, 2250 ve 2500 dak-1 devirlerde çalıştırıldı. Termoelektrik modüllerin performansı, farklı motor devirlerinde oluşan sıcak ve soğuk yüzey sıcaklıkları gibi parametreler kullanılarak değerlendirildi. Termoelektrik jeneratör sistemleri atık ısı dönüşüm uygulamalarında kullanılırlar. Termoelektrik jeneratörü oluşturan her bir modül 56 mmx56 mm yüzey uzunluklarına ve 5 mm kalınlığa sahiptir. Termoelektrik jeneratör termoelektrik modüller, egzoz gazı akış hattı ve soğutma suyu akışını düzenleyen kanallardan oluşmaktadır. Çalışmada farklı çalışma şartları altında egzoz gazlarının termoelektrik jeneratöre giriş sıcaklığı ve akış hızı ölçüldü. Motor egzoz sistemine bağlanan termoelektrik jeneratör sisteminin ürettiği elektrik enerjisi hesaplandı. Bütün testler sonucunda, sistemin maksimum elektriksel çıkış gücü 39.27 W olarak tespit edilmiştir. Aynı zamanda, bu sistemin içten yanmalı benzinli motor üzerindeki etkisi araştırıldı. Anahtar kelimeler: Atık Isı Enerjisi, Benzinli Motor, Termoelektrik.
453
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Recycling of Exhaust Gas Heat Energy with the Help of Thermoelectric Generator in Gasoline Engine İlker TEMİZER1,*, Tahsin YÜKSEL2, İbrahim CAN3 1
Cumhuriyet University, Faculty of Technology, Sivas, Turkey Cumhuriyet University, Faculty of Technology, Sivas, Turkey 3 Cumhuriyet University, Faculty of Technology, Sivas, Turkey *Responsible author e-mail:
[email protected] 2
Abstract In case of establishing a waste energy recovery system based on exhaust system in engine, the continuity of the energy will be provided and the emissions of greenhouse gases in the environmental dimension will be reduced. Hence, it has been believed that the electrical energy produced by thermoelectric generators may have an important effect to meet a part of the energy produced by alternators. Thermoelectric is the science that examines the electrical potential that is composed on the materials due to the temperatures of the liquid or solid materials. Also, thermoelectric is the transformation of the temperature energy into electrical energy or electrical energy into temperature energy. In this study, a prototype which electric connection of the 20-piece thermoelectric modules mounted on the structure made from Aluminium 6061 material was been developed for the working principle suitable to the thermoelectric generator systems. The engine was operated 1000, 1250, 1500, 1750, 2000, 2250 ve 2500 min-1. The performance of the thermoelectric modules is evaluated using the operating parameters such as the hot and cold junction temperatures in terms of different engine speed. Thermoelectric generators (TEMs) are used in waste heat recovery application. Each module which is form the thermoelectric generator a surface area of 56 mm x 56 mm and a thickness of 5 mm. TEG was constructed by exhaust gas and coolant channels, the TEMs. In study was measured mass flow rate, and TEG inlet temperatures of the exhaust gas under various engine operating conditions. The electric energy generated of the thermoelectric generator system which connected to the engine exhaust system was calculated. After all testing, the maximum elektrical power output of the system was 39.27 W. Also, the effect of this system on the internal combustion gasoline engine was investigated. Key words: Waste Heat Energy, Gasoline Engine, Thermoelectric.
454
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Otomotiv Termoelektrik Jeneratörünün Deneysel ve Sayısal Performansı İlker TEMİZER1,*, Cumali İLKILIÇ2 Cumhuriyet Üniversitesi Teknoloji Fakültesi, Sivas, Türkiye 2 Fırat Üniversitesi Teknoloji Fakültesi, Elazığ, Türkiye *Sorumlu yazar e-posta:
[email protected]
1
Özet Bu çalışmada, farklı egzoz sıcaklık değerleri altında termoelektrik modülün elektriksel güc hesabını sağlayan bir model geliştirilmiştir. Termoelektrik modüllerdeki etki, farklı motor devir sayılarında deneysel ve sayısal olarak araştırılmıştır. Ansys Termal Elektrik Programında kullanılan çalışma sınır koşulları deneysel çalışmalardan elde edilmiştir. Deneysel çalışmada 40 adet termoelektrik modül kullanılarak bir prototip oluşturulmuştur. Termoelektrik modüllerin her iki yüzeyinde oluşabilecek mikroskobik hava boşluklarını doldurmak ve ısı transfer dönüşümünü iyileştirmek için termal macun kullanımına gidilmiştir. Bu çalışma, motorun farklı çalışma koşullarının termoelektrik modüllerin elektrik üretimi üzerine olası etkilerini analiz etmeyi amaçlamaktadır. Atık ısı enerjisini elektrik enerjisine dönüştüren Otomotiv Termoelektrik Jeneratörü sisteminde maksimum devre voltajı 40 adet termoelektrik modül için 63 V olarak kaydedilmiştir. Termoelektrik modüllerin elektriksel güç değeri ortalaması alınarak belirlenmiştir. 75 Nm motor yükünde ve 1500, 2000, 2500, 3000 ve 3500 dev/dak çalıştırılan motorda sırasıyla bir termoelektrik modülün elektriksel gücü 0.26 W, 0.5 W, 1 W, 2.38 W and 3.75 W olmuştur. Aynı şartlar altındaki sayısal analizlerde elde edilen bu değer sırasıyla aynı motor devirleri için 0.42 W, 1.16 W, 2.17 W, 2.9 W ve 5 W olarak tespit edilmiştir. Deneysel ve sayısal analizlerdeki elde edilen bilgiler göstermektedir ki, termoelektrik modüllerdeki sıcaklık dağılımlarının uniform olmasının yanı sıra termal ve elektriksel bağlantılarda oluşan kayıplar modüllerin etkinliğinin azalmasına neden olmuştur. Anahtar kelimeler: Motorlarda Atık Isı, Termoelektrik, Termal analiz.
455
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Experimental and Numerical Performance of Automotive Thermoelectric Generation İlker TEMİZER1,*, Cumali İLKILIÇ2 1
Cumhuriyet University, Faculty of Technology, Sivas, Turkey 2 Fırat University, Faculty of Technology, Elazığ,, Turkey *Responsible author e-mail:
[email protected]
Abstract In this study, a model which allows the electrical power calculation of thermoelectric module under different exhaust temperature gradients was developed. The impact in thermoelectric modules was investigated both experimentally and numerically in different engine speed. The working boundary conditions used in Ansys Thermal Electric Program were obtained from experimental studies. In the experimental study, a prototype was created by using 40 thermoelectric module. Thermal paste was used in order to recover the heat transfer and fill the microscopic gases on two surfaces of thermoelectric modules. This study aims to analyze possible impacts of various engine operating conditions on thermoelectric modules and power generation of thermoelectric modules. Maximum circuit voltage in the Automotive Thermoelectric Generation system that transforms the waste heat energy into electrical energy was recorded as 63 V for 40 thermoelectric module. The value of electrical power of thermoelectric modules was described as average. The electrical power value for per thermoelectric module was 0.26 W, 0.5 W, 1 W, 2.38 W and 3.75 W in the engine speeds of 1500 1/min, 2000 1/min, 2500 1/min,3000 1/min and 3500 1/min and in 75 Nm engine load, respectively. This values was obtained as 0.42 W, 1.16 W,2.17 W, 2.9 W,5 W in numerical analaysis under some conditions. The data obtained in experimental and numerical studies show that thermal and electrical connection losses as well as non-uniform temperature distribution in thermoelectric module caused the reduce of modules efficiency. Key words: Waste Heat in Engine, Thermoelectric, Thermal analysis.
456
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Üretimde Verimlilik ve Sürdürebilirlik İçin 3 - 6'' Boru Bağlantı Elemanlarının Döküm Derece Sisteminde Optimizasyon İrem DÜZDAR1,*, Özkan KÜÇÜK2, Burak ÖZTÜRK3, 1Düzce Üniversitesi, Endüstri Mühendisliği Bölümü, Düzce, Türkiye 2Kastamonu Üniversitesi, Malzeme Bilimi ve Nanoteknoloji Mühendisliği, Kastamonu, Türkiye 3 Kastamonu Üniversitesi, Malzeme Bilimi ve Mühendisliği, Kastamonu, Türkiye *Sorumlu yazar e-posta:
[email protected]
Özet Boru bağlantı elemanları bina içme suyu ve doğalgaz şebeke sistemlerinde, yangın tesisatında, makine ekipmanlarında, otomotiv ve havacılık sektörü başta olmak üzere diğer bir çok farklı alanda boru bağlantılarında kullanılmaktadır. Fittings boru bağlantıları TS 11 EN 10242 standart ölçülerine göre üretimi yapılmaktadır. Boru bağlantı elemanlarının farklı tip preslerde değişken derece ölçülerinde üretimi yapılabilmektedir. 1/2 - 2 '' ölçüleri için 520 x 400 ölçülerinde bir derece sistemi geliştirilerek optimum üretim koşulları elde edilmiştir. Bu bilimsel çalışmada ise 3 - 6'' boru bağlantı ürünlerinin optimum derece sistemi tasarımı, malzemelerin kum sıkışma miktarı ve standart ölçüler dikkate alınarak oluşturulan dizilim denklemleriyle 600 x 500 ölçülerinde yapılmıştır. Birim sürede üretilen ürün sayısı artırılırken, artık yolluk oranı ve hatalı ürün miktarı azaltılmıştır. Ayrıca optimum koşullarda üretim ile enerji tüketiminde verimlilik sağlanırken çevreyi kirleten atık kum miktarı azaltılmıştır. Üretimde verimlilik ve sürdürebilirlik artışı için optimum fittings derece dizilimi belirlenmiştir. Anahtar kelimeler: Döküm Derece Sistemi, Boru Bağlantı Elemanı, Yolluk Oranı.
457
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Optimization of Casting Degree System of 3 - 6 '' Pipe Fittings for Productivity and Sustainability in Production İrem DÜZDAR1,*, Özkan KÜÇÜK2, Burak ÖZTÜRK3, Düzce University, Department of Industrial Engineering, 81620, Düzce, Turkey Kastamonu University, Materials Science and Nanotechnology Engineering, Kastamonu, Turkey 3 Kastamonu University, Materials Science and Engineering, Kastamonu, Turkey *Responsible author e-mail:
[email protected] 1
2
Abstract Pipe fittings are used in building drinking water and natural gas network systems, fire installations, machinery equipments, automotive and aerospace sector as well as many other field pipe connections. Fittings pipe connections are manufactured according to TS 11 EN 10242 standard. Pipe fittings can be manufactured in different types of presses with varying degrees of measurement. Optimum production conditions have been achieved by developing a degree system of 520 x 400 for 1/2 - 2 '' measurements. In this scientific work, the optimum grade system design of the 3 - 6 '' pipe connection products was made with 600 x 500 measurements using the line equations which were taken into consideration of the amount of sand compression and the standard measurement of the materials. While the number of products produced is increased during the unit period, the runway rate and the amount of defective products are reduced. In addition, while optimum production and energy efficiency are achieved, the amount of waste sand polluting the environment is reduced. Optimum fitting degree sequence is determined for productivity and sustainability increase in production. Key words: Casting Degree System, Fittings, Runner Ratio.
458
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürdürebilirlik İçin İçten Dişli Pompalarda Benckmarking Analizi ile Tasarım ve Enerji Tüketiminde Optimizasyon İrem DÜZDAR1,*, Özkan KÜÇÜK2, Burak ÖZTÜRK3, 1Düzce Üniversitesi, Endüstri Mühendisliği Bölümü, 81620, Düzce, Türkiye 2Kastamonu Üniversitesi, Malzeme Bilimi ve Nanoteknoloji Mühendisliği, Kastamonu, Türkiye 3 Kastamonu Üniversitesi, Malzeme Bilimi ve Mühendisliği, Kastamonu, Türkiye *Sorumlu yazar e-posta:
[email protected]
Özet Endüstride farklı tip dişlilerle çalışan pozitif deplasmanlı pompalar ile benzin, mazot, kimyasal ve yağların bir depodan diğerine aktarımı yapılmaktadır. İçten dişli, paletli ve helis dişli pompalar olmak üzere gruplandırılan pompaların genel özelliği, yerin altından akaryakıtı emip yüksek metrajlara basabilmesidir. Ülkemizde üretilen içten dişli pompanın düşük debi değerleri, sesli çalışması, akaryakıt çıkış vanasının aktarım sırasında kapatıldığında dişli ömründe azalma gibi olumsuz sonuçlar ortaya çıkmaktadır. Bu çalışmada; kıyaslama (benchmarking) çalışması yapılarak üretimi yapılan düz dişli pompalar debi, hacim, ağırlık, enerji tüketimi ve maksimum basınç kriterleri dikkate alınarak incelenmiştir. Kıyaslama çalışması sonucunda IPT Akaryakıt kuruluşuna ait olan bir pompanın; enerji tüketimini azaltmak ve birim zamanda dolum kapasitesini artırmak için yeni bir tasarım geometrisi geliştirilmesi gerektiği ortaya çıkmıştır. Dişliler evolment eğrisi dikkate alınarak üretimi yapılırken 10 diş sayısının altındaki tasarımlarda özel geometrilere ihtiyaç duyulmaktadır. Bu dişli tasarımı sürtünmeyi azaltacak ve pompa içinde daha fazla transfer yapabilecek şekilde geliştirilmiştir. Bu tasarım geometrisi sonlu elemanlar yöntemi ve kinematik analiz ile geliştirilerek üretimi yapılmıştır. Hali hazırda üretimi yapılan Er 1114 içten dişli pompa modeline montajı yapılan dişli sistemi dolum testinde denenmiştir. Dolum kapasitesi 500 lt/dak debiden 620 litre/dak debi değerine yükseltilmiştir. Sürdürebilirlik ve enerji tüketiminde verimlilik için geliştirilen bu yeni tasarım endüstriyel tasarım patenti ile koruma altına alınmıştır. Anahtar kelimeler: İçten dişli pompalar, enerji tüketimi, benchmarking analizi.
459
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Optimization in Design and Energy Consumption by Benchmarking Analysis in Internal Gear Pumps for Sustainability İrem DÜZDAR1,*, Özkan KÜÇÜK2, Burak ÖZTÜRK3, Düzce University, Department of Industrial Engineering, 81620, Düzce, Turkey Kastamonu University, Materials Science and Nanotechnology Engineering, Kastamonu, Turkey 3 Kastamonu University, Materials Science and Engineering, Kastamonu, Turkey *Responsible author e-mail:
[email protected] 1
2
Abstract Positive displacement pumps working with different types of gears in the industry are used to transfer gasoline, diesel oil, chemicals and oils from one depot to another. The general characteristic of pumps grouped as internal gear, pellet and helical gear pumps is that they can suck fuel from under the ground and press highs. The internal gear pump produced in our country has negative results such as low flow rate, voice operation, decrease of gear life when the fuel outlet valve is closed during transmission. In this study; Benchmarking work has been done by considering the flow rate, volume, weight, energy consumption and maximum pressure criteria. As a result of the comparison study, a pump belonging to IPT Fuel Company; A new design geometry has to be developed in order to reduce energy consumption and increase the filling capacity at the unit time. Special geometries are needed in the designs under 10 teeth while the gears are produced considering the evolment curve. This gear design has been developed to reduce friction and allow more transfer within the pump. This design geometry was developed by finite element method and kinematic analysis. It is currently being manufactured and tested in the filling test of the gear system which is installed on ER 1114 internal gear pump model. The filling capacity has been increased from 500 L/ min to 620 L/min flow rate. Developed for sustainability and efficiency in energy consumption, this new design is protected by the industrial design patience. Key words: Internal gear pumps, energy consumption, benchmarking analysis.
460
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Karamanoğlu Mehmetbey Üniversitesi Fotovoltaik Sistem Potansiyeli ve Maliyet Analizi İsa BAYRAM1,2*, Buket BEZGİN ÇARBAŞ1,2 Enerji Sistemleri Mühendisliği, Karamanoğlu Mehmetbey Üniversitesi, Karaman, TÜRKİYE İletken Polimerler ve Enerji Uygulamaları Laboratuvarı, Karamanoğlu Mehmetbey Üniversitesi, Karaman, TÜRKİYE * Sorumlu yazar e-posta:
[email protected],
[email protected] 1
2
Özet Teknolojinin ilerlemesi ve sanayi kuruluşlarının giderek artması nedeniyle enerjiye olan ihtiyaç gün geçtikçe artmaktadır. Fosil yakıtların çevreye verdiği zararların yanı sıra, yakın bir gelecekte tükenecek olması günümüzde önemi her geçen gün artan enerji olgusu için tehlike arz etmektedir. Bu nedenle yenilenebilir enerji kaynaklarına yönelim gün geçtikçe artmaktadır. Güneş enerji santralleri yenilenebilir özellikleri yanında yerel ve temiz bir enerji kaynağı olduğundan günümüzde giderek önemi artan bir enerji üretim tesisi durumundadır. Güneş enerji sistemleri tarıma elverişsiz çorak arazilere ve çatı yüzeylerine kurulmaktadır. Ülkemiz güneş enerjisi bakımından oldukça verimli bir konuma sahip olmasına rağmen bu potansiyel yeterince kullanılmamaktadır. Bu proje kapsamında ülkemizin güneş potansiyeli en yüksek illerinden olan Karaman bölgesinde bulunan Karamanoğlu Mehmetbey Üniversitesi yerleşkesinde kullanılmayan boş (ölü) alanlar ve yerleşkede bulunan bina çatıları için fotovoltaik enerji kurulu güç üzerine literatürde kullanılan modellemeler ve programlar yardımıyla üniversitenin var olan fotovoltaik güç potansiyeli hesaplanacaktır. Ayrıca düşük maliyet ile yüksek verimli 1 MW'lık fotovoltaik güç sistemi tasarlanarak üniversite ekonomisine olan katkısı değerlendirilecektir. Bu sistem tasarımında Google Earth Maps üzerinden alan tayini yapılarak, AUTOCAD çizim programı aracılığı ile görsellendirilecektir. Bunun yanı sıra çeşitli firmalardan alınan teklifler ve farklı sistem elemanları kombinasyonlarının kıyaslaması Microsoft Excell üzerinden yapılacaktır. Bu çalışmanın amacı ülkemiz ve diğer üniversitelerde fotovoltaik enerji tabanlı elektrik üretimi konusunda farkındalık yaratmaktır. Özellikle bina çatıları ve boş alanlar üzerine yerleştirilecek güneş panelleri ile elde edilecek enerji kazançları Karamanoğlu Mehmetbey Üniversitesi örneği üzerinden değerlendirilecektir. Ülkemizin 2023 yenilenebilir enerji politikası doğrultusunda yapılan bu çalışma örnek proje niteliğindedir. Anahtar kelimeler: 2023 Türkiye Yenilenebilir Enerji Politikası, Maliyet Analizi.
461
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Karamanoglu Mehmetbey University Photovoltaic System Analysis and Its Cost Analysis İsa BAYRAM*1,2, Buket BEZGIN CARBAS1,2 1
Department of Energy Systems Engineering, Karamanoglu Mehmetbey University, Karaman, Turkey 2 Conductive Polymers and Energy Applications Laboratory, Karamanoglu Mehmetbey University, Karaman, Turkey *Responsible author e-mail:
[email protected],
[email protected]
Abstract Due to the progress of technology and the increasing number of industrial enterprises, the need for energy is increasing day by day. In addition to the harmful effects of fossil fuels on the environment, the fact that it will be consumed in the near future presents a danger to the ever-increasing energy potential. For this reason, the tendency towards renewable energy sources is increasing day by day. Solar power plants are an increasingly important power generation facility because of their renewable characteristics as well as being a local and clean energy source. Solar energy systems are installed on the rooftop surfaces and in the barren areas where agriculture is unfavorable. Although our country has a very efficient position in terms of solar energy, this potential is not used enough. Karamanoğlu Mehmetbey University which, located in the Karaman region, is one of the highest solar potential areas of our country. Our purpose is to calculate the photovoltaic power potential of the university with the help of the models and programs used in the literature on empty (dead) areas and building roofs in the campus that are not used in the settlement. In addition, a low-cost, high-efficiency 1 MW photovoltaic power system will be designed and its contribution to the university economy will be evaluated. This system design will be visualized via AUTOCAD drawing program by making area designation via Google Earth Maps. In addition to this, the proposals from various companies and the comparison of the combinations of different system elements will be made via Microsoft Excell programme. The aim of this study is to raise awareness of photovoltaic energy-based electricity generation in our country and other universities. Energy gains to be gained by solar panels to be placed on roofs and vacant spaces will be evaluated for Karamanoğlu Mehmetbey University energy analysis. This study is a sample Project, which is made in line with the 2023 renewable energy policy of our country. Key words: 2023 Renewable Energy Policy, Cost Analysis.
462
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Isı Pompalarında (Toprak- Yer Kaynaklı) Teknolojik İlerlemesi Salih LAKA2,*, İsmail ilke KÖSE1 Recep Tayyip Erdoğan Üniversitesi, Teknik Bilimler M.Y.O,Rize, Türkiye Süleyman Demirel Üniversitesi, Yalvaç Teknik Bilimler M.Y.O,Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected] 2
1
Özet Günümüzde şartlarında ülkemizde ve dünya ülkelerinde enerji ihtiyaçlarının büyük oranını fosil kaynaklı (kömür, doğal gaz, petrol vb.) yakıtlardan karşılanmaktadır. Mevcut enerji talebinin nüfus ve yeni kurulan sanayi tesisleri ile fosil yakıtların birim fiyatlarının artacağı düşünülmektedir. Bu sebeplerden dolayı alternatif enerji arayışına hız kazanmaktadır. Devlet desteği çerçevesinde doğal kaynaklara mümkün olduğunca çevreye en az zarar veren ve tükenmeyen enerji alternatiflerinin geliştirilmesine ve uygulamalarına yöneltilmiştir. Doğal ısı kaynaklarını kullanarak enerji taşınmasını sağlayan Isı pompası, ısı makinesinin tersi bir çevrime göre çalışan, iş yapılması ile ısıyı soğuk kaynaktan sıcak kaynağa ulaştıran bir makinedir. Alternatif enerji kaynaklarından olan Toprak Kaynaklı Isı Pompası sitemleri yenilenebilir, sürdürülebilir ve çevreye dost bir kaynak olarak Türkiye’de önemli bir potansiyele bulunmaktadır. Isı pompası, ısı makinesinin tersi bir çevrime göre çalışan, iş yapılması ile ısıyı soğuk kaynaktan sıcak kaynağa ulaştıran bir makinedir. Toprak ısısının yıl boyunca çok fazla değişmemesi, ısı pompası için dengeli bir çalışma ortamı sağlamaktadır. Toprak masif (iri) bir yapıya sahip olduğu için yeryüzüne uğraşan yeryüzüne ulaşan güneş enerjisinin yarısı jeo kütlede yutularak depolanır. Toprak Kaynaklı Isı Pompalarının en önemli bileşeni ise topağa döşenen ısı değiştiricilerdir. Isı değiştiricilerindeki teknolojik geliştirilmesi araştırılması sonucunda verimin iyileştirilmesi sağlanacaktır. Bu çalışmanın amacı; YKIP larının, ülkemizde yaygınlaşmasına ivme katacağı düşünülmektedir. Bu çerçevede; yurt dışında ve ülkemizde bu konuda yapılan çalışmalar açıklanacak alışıla gelmiş ısıtma YKIPlarının ülkemizde gelişmesine yönelik önerilerde bulunulacaktır. Anahtar kelimeler: Yer kaynaklı ısı pompası, ısı değiştiricisi, ısı kaynakları.
463
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Heat Pumps (Soil-Ground Source) Technological Progress Salih LAKA2,*, İsmail ilke KÖSE1 Recep Tayyip Erdoğan Üniversitesi, Teknik Bilimler M.Y.O,Rize, Türkiye Süleyman Demirel Üniversitesi, Yalvaç Teknik Bilimler M.Y.O,Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected] 2
1
Abstract Today's conditions are met by fossil fuels (coal, natural gas, gasoline, etc.) with a large proportion of energy needs in our country and world countries. Unit prices of fossil fuels are expected to increase. For these reasons, you can accelerate the quest for alternative energy. The possibility of reaching natural resources within the framework of state support has been directed towards the development and implementation of energy alternatives that are least harmful and uninhabitable. Provides energy transport using natural heat sources The heat pump is a machine that operates in the opposite direction to the heat machine and delivers heat to the cold, welded hot source for work. Earth Source Heat Pump systems, which are alternative energy sources, have a significant potential in Turkey as a renewable, sustainable and environmentally friendly resource. Heat pump, heat work, working against a work, using heat with business world. It is a machine that delivers heat to the source. The soil once again provides the environment. Because the earth has a massive structure, half of the solar energy reaching the Earth dealing with the earth is stored in the earth mass. The most important component of Soil Welded Heat Pumps is heat exchangers that are laid on top of the ground. Technological developments in heat exchangers. The purpose of this study is; It is thought that YKIP is giving momentum to the expansion in our country. In this context; I would like to talk about the development of conventional heating SOHPs in our country abroad and in our country. Key words: Ground source heat pump, heat exchanger, heat sources.
464
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Yenilenebilir Enerji Kaynaklarının Türkiye’deki Geleceği İsmail ilke KÖSE1,* Süleyman Demirel Üniversitesi, Yalvaç Teknik Bilimler M.Y.O,Isparta, Türkiye * Sorumlu yazar e-posta:
[email protected]
1
Özet Enerji sektörü, ekonomik, sosyal ve politik boyutları düşünüldüğünde günümüz dünyasında önemli bir rol oynamaktadır. Günümüzde da üretim, tüketim, konfor ve sürdürülebilir kalkınmanın için enerji en önemli bileşen haline gelmiştir. Her alanda yaygın olarak kullanılmaya devam eden fosil kaynakları tükenecek olması ve artan nüfusla birlikte enerji talebindeki artışlar nedeniyle dünyamızda mevcut yenilenebilir enerji kaynaklarının ortaya çıkartılması ve kullanıma sunulması gerekmektedir. Uluslararası Enerji Ajanslarının verilerine göre durumunda dünya birincil enerji talebinin 2030 yılına kadar%40 oranında artacağı beklenmekte ve bu yüzden enerji kaynaklarının çeşitliğinin artırılması ve geleceğinin planlanması büyük önem taşımaktadır. Yapılan bu çalışmada yenilenebilir enerji kaynakları ve daha verimli nasıl kullanılabilir sorusuna cevap aranacaktır. Anahtar kelimeler: Güneş enerjisi, fosil yakıt, yenilenebilir enerji, enerji verimi.
465
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Future of Renewable Energy Sources in Turkey İsmail ilke KÖSE1,* Süleyman Demirel Üniversitesi, Yalvaç Teknik Bilimler M.Y.O,Isparta, Türkiye * Responsible author e-mail:
[email protected]
1
Abstract The energy sector plays an important role in today's world when economic, social and political dimensions are considered. Today, energy is the most important component for production, consumption, comfort and sustainable development. Presenting and exploiting existing renewable energy sources to use fossil resources that continue to use fossil resources together with consuming and growing populations. According to the importance of International Energy Agencies, 40% of the world's primary energy demand is expected to be artifacts until 2030, which means that a variety of energy sources and the planning of the future are of great importance. These renewable energy resources will be sought and the answer will be sought in a more efficient way. Key words: Solar energy,
fossil fuel, renewable energy, energy generation.
466
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Havalimanlarındaki Akülerin Gsm Modülü İle Kontrolü İsmail Serkan ÜNCÜ1,*, Cemal IŞILAK1, Merve KESKİN1 1
Süleyman Demirel Üniversitesi, Teknoloji Fakültesi, Elektrik Elektronik mühendisliği Bölümü, Isparta,TÜRKİYE *Sorumlu yazar e-posta:
[email protected]
Özet Aküler havalimanındaki yön bulma, yaklaşma, inişe yardımcı olan cihazların beslemesini yapmaktadır. Yirmi dört saat yaşayan havalimanları sürekli enerji tüketmektedir. Aküler gibi sürekli şarj edilmesi gereken cihazların uzaktan takibi havalimanındaki yaşam kalitesi önemli derece artırır. Havalimanında anında bilgi almak, arızaya anında müdahele etmek son derece önemlidir. Bu çalışmada, havalimanında bulunan akülerin sıcaklık ve enerji kontrolünü yaparak GSM modülü aracılığıyla hızlı bir şekilde bilgi almayı, arızalara hemen müdahale edilmesi amaçlanmıştır. Akü kontrol sistemi geliştirilirken LM324, GSM modülü, LM324, LM35, PIC 16F88 kullanılmıştır. LM317 GSM modülü için en uygun gerilim olan 3,8 V çıkış almamızı sağlamıştır. LM35 ısı sensörümüz ortamın ve akünün sıcaklığını ölçülmesini sağlayarak PIC üzerinden GSM modülümüze bilgi gönderir. Her sıcaklık ve voltaj değişiminde telefonumuza GSM modülü aracılığıyla bilgi gönderilir. Böylece bir merkezden tüm akü durumları takip edilebilir hale getirilmiştir. Sistemin genel kullanım maliyeti düşünüldüğünde oldukça ekonomik olduğu söylenebilir. Sistem sayesinde zamandan ve iş gücünden önemli ölçüde tasarruf sağlanmıştır. Anahtar kelimeler: GSM, akü, havalimanı kontrol.
467
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Control Of Batteries in The Airports With Gsm Module İsmail Serkan ÜNCÜ1,*, Cemal IŞILAK, Merve KESKİN 1
Suleyman Demirel University Technology Faculty, Electrical and Electronic Engineering Department, Isparta-TURKEY, * Responsible author e-mail:
[email protected]
Abstract Batteries navigation at the airport, approach, landing, which helps the devices operate supply. Twenty-four hour airports are constantly consuming energy. Remote monitoring of devices that require continuous charging, such as acers, significantly improves the quality of life at the airport.This work is located at the airport, the temperature of the battery and power control via a GSM module to get information quickly, immediate intervention is intended to be failures. The application LM324, GSM module, LM324, LM35, PIC 16F88 is used. GSM module which is most suitable for the LM317 voltage is 3.8 V output enables us to take. LM35 temperature sensor environment and enabling us to measure the temperature of the battery out of the PIC sends the information to the GSM module. Each temperature and voltage changes to the phone via GSM module data is sent. With this work, we are saving time. We monetary gain. With this project, we get instant information from the airport so it is very important to intervene immediately to malfunction. Key words: GSM, Airport kontrol, batteries.
468
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Güneş Enerjili Kesintisiz Güç Kaynağı Tasarımı Ve Uygulaması İsmail Serkan ÜNCÜ1,*, Cemal IŞILAK1, Koray SELVİ1 1
Süleyman Demirel Üniversitesi, Teknoloji Fakültesi, Elektrik Elektronik mühendisliği Bölümü, Isparta,TÜRKİYE *Sorumlu yazar e-posta:
[email protected]
Özet Güneş enerjisi bedava ve sürekli bir enerjidir. Bu enerjiden maksimum bir şekilde yararlanmak temel beklentidir. Günümüzde elektrik enerjisi off-grid sistemlerde güneş olduğunda aküye enerji depolanır. Bu akü depodan elektrik enerjisi kullanılır. Akülerin günlük kullanımda çok kayıplı çalışmaları, enerji depolanmaları için bir süreye ihtiyaç duymaları, üretim süreci ve atıklarının çevreci olmaması gibi nedenlerle akü kullanımına alternatif çözümler aranmaktadır. Bu çalışmada, akü kullanmayan güneş enerjisi temelli güç sağlayıcılarının enerjisi azalınca veya değişince hemen şebeke takviyesi yapabilen bir kontrol sistemi geliştirilmiştir. Geliştirilen sistem güneş enerjili kesintisiz güç kaynağı sistemi sayesinde ekonomik olup, şebeke desteği sayesinde almaça sürekli enerji sağlayarak gerilim değişim ve geçişlerini ve bunlara bağlı cihaz bozulmalarını önlemektedir. Sistemde arduino tabanlı sistemde panelin ürettiği gerilim analog olarak okunmuş ve okunan bilgi ile iki yollu röle kullanılarak, regüle edilmiş gerilim ve şebekeden Vdc’ye dönüştürülmüş gerilim anahtarlanmış, gerilim kapasitesi yeterli olduğu anda sistem panelden diğer durumlarda ise şebekeden kesintisiz akıllı bir otomatik sistem ile çalıştırılmıştır. Faaliyet durumuna göre Arduino üzerinden Lcd ekrana anlık durum bilgisi gönderilmiştir. Anahtar kelimeler: Solar, UPS, Güneş paneli.
469
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Solar Powered Uninterruptible Power Supply Design And Application İsmail Serkan ÜNCÜ1,*, Cemal IŞILAK1, Koray SELVİ1 1
Suleyman Demirel University Technology Faculty, Electrical and Electronic Engineering Department, Isparta-TURKEY, * Responsible author e-mail:
[email protected]
Abstract Solar energy is free and continuous energy. It is essential to take maximum advantage of this energy. Today, electric energy is stored in off-grid systems when the solar energy is sunlight. This battery is used in the electric energy of the reservoir. Alternative solutions are being sought for the use of batteries for reasons such as very lossy work in daily use, a need for energy storage, and environmentalism in the production process and waste. In this study, a control system was developed that can power grid immediately when the energy of solar power-based power suppliers that do not use batteries is reduced or changed. The developed system is economical thanks to the solar-powered uninterruptible power supply system and thanks to the network support, the receiver provides continuous energy to prevent voltage changes and transients and device connected to them. Arduino-based read as an analog voltage produced by the panels in the system and using two-way relay and read information, regulated voltage and the converted voltage is switched from network to Vdc, the voltage capacity is sufficient at the time the system panel in the other cases were operated with an intelligent automatic system without interruption from the network. According to the activity status LCD display current status information via the Arduino it has been sent. Key words: Solar, UPS, Solar panel.
470
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
“Üniversite bize ne veriyor? Sektör bizden ne bekliyor?” Örnek Bir Uygulama İsmet SÖYLEMEZ1,*, Ahmet DOĞAN2, Uğur ÖZCAN3, Recai ÖZCAN4, Buket DEMİRHAN3, Merve TUNA3, Ekin EVCİL3 Abdullah Gül Üniversitesi, Kayseri, Türkiye Osmaniye Korkut Ata Üniversitesi, Osmaniye, Türkiye 3 Gazi Üniversitesi, Ankara, Türkiye 4 Selçuk Üniversitesi, Konya, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2
Özet Üniversite mezunu olan kişiler özel sektörde çalışmaya başlayınca çok büyük zorluklarla karşılaşmaktadırlar. 6 ay hatta bir sene kadar oryantasyon süreçleri neticesinde gerçek hayata alışmaktadırlar. “Üniversite bize ne veriyor? Sektör bizden ne bekliyor?” başlığı ile üniversite eğitimi ile özel sektör arasındaki uçurumun önemine dikkat çekilmeye çalışılacaktır. Bu çalışmada, Endüstri Mühendisliği Bölümü’nde öğrenim gören öğrencilerin, bölümden aldıkları teorik bilgi ve tecrübelerin sektördeki etkinlikleri araştırılmıştır. Bu kapsamda, 3’üncü ve 4’üncü sınıf öğrencileri ve bölüm mezunlarına anket yapılmıştır. Mezunlar ve öğrenciler için 2 ayrı anket kullanılmıştır. Yapılan anketler, öğrenciler için 30 sorudan oluşan 5 bölümü, mezunlar için ise 20 sorudan oluşan 6 bölümü kapsamaktadır. Öğrenci anketinde; Demografik Bilgiler, Üniversite Genel Değerlendirme, Öğretim Elemanları Değerlendirmesi, Öğrenme/Öğretme Yöntem ve Tekniklerinin Değerlendirmesi, Öğrenci Topluluğu Faaliyetleri Değerlendirilmesi olarak 5 bölümden oluşmaktadır. Mezun anketinde ise bunlara ek olarak Endüstri Mühendisliği Öğrencilerinin Değerlendirilmesi de söz konusudur. Anket örneklem sayıları öğrenciler için 81, mezunlar için 50’dir. Üniversite, bölüm, ders sorumlusu, ders içerikleri ve uygulama alanları konusunda değerlendirmeler yapılmıştır. Mezun anketinde bu konulara ek olarak yeni mezun Endüstri Mühendisliği öğrencilerinin sektördeki etkinliklerinin değerlendirilmesi istenmiştir. Değerlendirmeler sonucunda, yapılması gereken iyileştirmelerin önem sırasının belirlenmesi için çoklu regresyon yöntemi kullanılarak istatistiksel strateji haritaları oluşturulmuştur. Ulaşılan sonuçlar betimleyici istatistik kullanılarak değerlendirilmiştir. Anahtar kelimeler: Üniversite-özel sektör karşılaştırması, istatistiksel strateji haritaları, anket.
471
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
“What Does University Give us? What Does the Sector Want from us?” A Case Study İsmet SÖYLEMEZ1,*, Ahmet DOĞAN2, Uğur ÖZCAN3, Recai ÖZCAN4, Buket DEMİRHAN3, Merve TUNA3, Ekin EVCİL3 Abdullah Gül Üniversitesi, Kayseri, Türkiye Osmaniye Korkut Ata Üniversitesi, Osmaniye, Türkiye 3 Gazi Üniversitesi, Ankara, Türkiye 4 Selçuk Üniversitesi, Konya, Türkiye *Responsible author e-mail:
[email protected] 1
2
Abstract Those who are university graduates face great difficulties when they start to work in the private sector. Orientation process may be 6 months to one year. Our study is "What does the university give us? What does the sector wait from us? " that the importance of the gap between the university education and the private sector. In this study, sectoral effectiveness of students/graduates was researched according to their gained theoretical knowledge and experience for Industrial Engineering Department. Within this scope a survey was conducted to third year, fourth year and graduated students. There were two different surveys used for students and graduates. The surveys consist of 6 sections consisting of 30 questions for students and 20 questions for graduates. Demographic Information, University General Evaluation, Faculty Members, Learning / Teaching Methods and Techniques Evaluation and Students Community Activities for students and in addition to students Industrial Engineering Students Evaluations for graduates. 81 students and 50 graduates filled this survey. Department, instructors, course content and field of application were considered by performed the surveys. Multiple regression analysis was used to determine statistical strategic maps. Evaluated results are interpreted by descriptive statistic methods. Key words: University-sector comparison, statistical strategy maps, survey.
472
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürdürülebilir Ekonomik Gelişim Göstergeleri İçin Bir Veri Zarflama Analizi Uygulaması İsmet SÖYLEMEZ1,*, Ahmet DOĞAN2, Recai ÖZCAN3, Uğur ÖZCAN4 Abdullah Gül Üniversitesi, Kayseri, Türkiye Osmaniye Korkut Ata Üniversitesi, Osmaniye, Türkiye 3 Selçuk Üniversitesi, Konya, Türkiye 4 Gazi Üniversitesi, Ankara, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2
Özet Sürdürülebilir ekonomik gelişim göstergeleri ülkelerin ekonomik, sosyal ve finansal hedefleri için önemli bir yol haritası olarak değerlendirilebilir. Bazı ekonomik göstergeler sosyo-ekonomik gelişim, sürdürülebilir tüketim ve üretim, demografik değişimler, toplum sağlığı, iklim değişikliği ve enerji, sürdürülebilir taşımacılık, doğal kaynaklar ve global işbirliği şeklindedir. Bu çalışma için kullanılacak olan veriler Avrupa Birliği İstatistik Ofisi EUROSTAT (European Community Statistical Office) veri tabanından alınmıştır. Veri Zarflama Analizi (VZA) farklı karar verme birimlerini etkin bir şekilde karşılaştırılması için kullanılan bir yöntemdir. Bu yöntemde amaç en az girdi ile en fazla çıktıyı elde etmeyi sağlayan girdi çıktı bileşimini bulmaktır. VZA modelleri girdi yönlü ve çıktı yönlü olarak iki farklı modele sahiptir. Aynı zamanda ölçeğe göre sabit getiri ve ölçeğe göre değişken getiri şeklinde de ayrı bir sınıflandırmaya sahiptir. Bu çalışma da Türkiye ve gelişmiş bazı Avrupa ülkelerinin işsizlik oranları, elektrik fiyatları, enerji tüketimi ve hane halkı enerji tüketim miktarları için 2015 yılı verilerini dikkate alarak performans değerlendirmesi yapılmaktadır. Elde edilen sonuçlar sayesinde ülkemizin bu göstergeler dikkate alındığı zaman hangi konumda yer aldığı ve daha üst sıralara ilerleme sağlaması için hangi ülkelerin ekonomik göstergelerinden faydalanması gerektiği sonucuna ulaşılacaktır. Anahtar kelimeler: VZA, sürdürülebilirlik, performans göstergeleri.
473
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Data Envelopment Analysis for Sustainable Economic Development Indicators: A Case Study İsmet SÖYLEMEZ1,*, Ahmet DOĞAN2, Recai ÖZCAN3, Uğur ÖZCAN4 Abdullah Gül Üniversitesi, Kayseri, Türkiye Osmaniye Korkut Ata Üniversitesi, Osmaniye, Türkiye 3 Selçuk Üniversitesi, Konya, Türkiye 4 Gazi Üniversitesi, Ankara, Türkiye *Responsible author e-mail:
[email protected] 1
2
Abstract Sustainable economic development indicators can be considered as an important roadmap for the economic, social and financial targets of countries. Some economic indicators are social-economic development, sustainable consumption and production, demographic changes, public health, climate change and energy, sustainable transportation, natural resources, global partnership. The data to be used for this study are collected from the European Union Statistical Office (EUROSTAT) database. Data Envelopment Analysis (DEA) is a method used to compare different decision making units effectively. In this method, the goal is to find the input-output combination that provides the least output with the least input. DEA models have two different modes as input oriented and output oriented. This study evaluates the performance of Turkey and developed European countries taking into account the data for 2015 for unemployment rates, electricity prices, energy consumption and household energy consumption amounts. The result will show that which countries should take advantage of the economic indicators in order to make further progress for our country. Key words: DEA, sustainability, performance indicators.
474
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Astemizol ve Klotrimazolün İyonlaşma Sabitinin Tayini için Sıvı Kromatografik, Spektrofotometrik ve Potansiyometrik Metotların Karşılaştırılması Kader POTURCU1*, Güleren ALSANCAK1, Ebru ÇUBUK DEMİRALAY1 1 Süleyman Demirel Üniversitesi, Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected]
Özet Azol bileşikleri insanlar, hayvanlar, biyosit ve tarım fungusitleri için antifungal ilaçların aktif bileşenleri olarak yaygın şekilde kullanılmaktadır. Klotrimazol, 1-[(2klorofenil) difenilmetil]-1H-imidazol diğer antimikotikler gibi geniş spekturumlu antifungal ajandır. Astemizol, 1-[(4-florofenil)metil]-N-[1-(4-metoksifenil)-etil)]-4piperidinil-1H-benzimidazol-2-amin, ikinci jenerasyon antihistaminik ilaçtır. Sakinleştirici yan etkilere sahip olmayan, uzun süreli etkiye sahip antialerjik ilaçtır. Birçok antimikotikve antihistaminikimidazoller 1 ppm’den daha az çözünürlük değeri olan suda çözünmeyen bileşiklerdir. Astemizol ve klotrimazol, birçok bilim insanının dikkatini çekmesine rağmen, bu ilacın iyonlaşma sabiti (pKa) değerleri ile ilgili az sayıda çalışma rapor edilmiştir. Potansiyometrik yöntem deneysel ölçümlerde cam elektrodun mükemmel duyarlılığı sebebiyle tercih edilen bir tekniktir. Ayrıca UV spektrofotometri iyonlaşma sabitlerinin tayini için geliştirilmiş bilgisayar programların yardımıyla hala yaygın olarak kullanılmaktadır. Sıvı kromatografi yöntemin de bileşiklerin çok saf olmasını gerekmediğinden ve küçük miktarlarla çalışılabildiğinden pKa değerlerinin tayini için güçlü bir tekniktir. İyonlaşma sabiti absorpsiyon, biyolojik aktivite gibi kimyasal olayların yanı sıra farklı pH' larda bileşiğin iyonlaşma derecesinin anlaşılması için kullanılan önemli bir parametredir. Ayrıca ilacın geliştirilmesi ve optimizasyonu içinde anahtar bir parametredir. Sıvı kromatografi, potansiyometri ve UV-görünür spektrofotometri metotları bileşiklerin pKa değerlerinin tayini için sıklıkla kullanılmaktadır. Çalışmada asetonitril-su ikili karışımı hidroorganik çözücü karışımı olarak seçilmiştir. Bu çalışmada asetonitril-su ikili karışımında astemizol ve klotrimazolün pKa değerlerinin tayini için farklı tekniklerin uygulaması karşılaştırılmıştır. Bileşiklerin iyonlaşma sabiti değerleri lineer olmayan regresyon modeli kullanılarak hesaplanmıştır. Bu üç analitik teknik birbiriyle uyumlu pKa değerleri vermiştir. Deneysel çalışmaların sonuçları literatür değerleri ile karşılaştırılmıştır. Anahtar Kelimeler: Klotrimazol, suda çözünmeyen bileşikler, pKa, RPLC, Potansiyometrik Titrasyon, Spektroskopik pKa.
475
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Comparison of Liquid Chromatographic, Spectrophotometric and Potentiometric Methods for Determination of Dissociation Constant of Astemizole ad Clotrimazole Kader POTURCU1*, Güleren ALSANCAK1, Ebru ÇUBUK DEMİRALAY1 1 Suleyman Demirel University, Isparta, Turkey *Responsible author e-mail:
[email protected]
Abstract Azole substances are widely used as active ingredients in antifungal pharmaceuticals for humans and animals, biocides and agricultural fungicides[1]. Clotrimazole 1-[(2-chlorophenyl) diphenylmethyl]-1H-imidazole is a broad spectrum antifungal agent that like other antimycoticimidazoles. Astemizole 1-[(4fluorophenyl)methyl]-N-[1-(4-methoxyphenyl)-ethyl)]-4-piperidinyl-1H-benzimidazol-2amin is a relatively new antihistamine with a long duration of action used to treat symptoms of allergic disorders. It joins a new class of drugs with little sedative effect. Many antimycotic and antihistaminic imidazoles are water-insoluble compounds with a water solubility typically less than 1 ppm. Although, astemizole and clotrimazole have been attracted attention of scientists, lesswork has been reported on dissociation constant (pKa) values of this drug. Potentiometry is the preferred technique because of the excellent response of the glass electrode in experimental measurements [4,11]. Also, UV spectrometry has still been used widely by the help of improved computer programs for the determination of dissociation constants. Liquid chromatography is also used as a powerful technique for determination of dissociation constants due to requires only small quantity of compounds, studied samples do not need to be pure. Dissociation constant is most valuable parameter to understand chemical phenomenon such as biological activity, absorption and extent of ionization of compound in different pH, so is the key parameter in drug development and optimization. Liquid chromatography, potentiometry and UV-visible spectrophotometry are frequ ently used for determination of pKa values of substances. In this study, acetonitrile-water binary mixture was chosen as hydroorganic solvent mixture. In this work, we have compared the application of the different techniques to the determination of pKa values of astemizole and clotrimazole in acetonitrile-water mixture. The dissociation constant values of compounds were calculated by use of a non-linear regression model. These three analytical techniques gave pKa results that were in good agreement. The results of experimental studies were compared with literature values. Key words: Clotrimazole, water insoluble compounds, pKa, RPLC, Potentiometric titration, Spectroscopic pKa.
476
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Çevre Denetimli Yumurta Üretim Kümesinde Hissedilen Sıcaklık ile Yumurta Kalitesi Arasındaki İlişkiler Kadir ERENSOY1,*, Ali ALTAN2, Musa SARICA1, Hakan BAYRAKTAR2 1
Ondokuz Mayıs Üniversitesi, Ziraat Fakültesi, Zootekni Bölümü, Samsun, Türkiye 2 Ege Üniversitesi, Ziraat Fakültesi, Zootekni Bölümü, İzmir, Türkiye *Sorumlu yazar e-posta:
[email protected]
Özet Kümes içi iklimsel çevrenin yumurta tavuklarının verimini, performansını ve ürün kalitesini önemli düzeyde etkilediği anlaşıldıktan sonra, bu alanda yapılan çalışmalar yoğunluk kazanmıştır. Son dönemde gündemde olan hissedilen sıcaklık, kanatlı işletmeleri için oldukça yeni bir kavramdır. Bu çalışma, 8 katlı kafes sistemine sahip çevre denetimli bir yumurta üretim kümesinde yürütülmüştür. Kümesin farklı bölgeleri ve bu bölgelerin farklı kafes katlarındaki hissedilen sıcaklık değerleri ile hayvanlardan elde edilen yumurtaların kalite parametreleri arasındaki ilişkiler değerlendirilmiştir. Kümes içerisindeki bölgeler havalandırma fanlarına uzaklıklarına göre 3’e ayrılmıştır. Her bir bölgede de alt, orta ve üst kafes katlarından alınan yumurtalarda kalite parametreleri olarak yumurta ağırlığı, kabuk oranı, ak yüksekliği, Haugh birimi, sarı çapı, sarı yüksekliği ve sarı indeksi incelenmiştir. Kümes içi hissedilen sıcaklık bölgeler ve kafes katları arasında önemli düzeyde farklıdır (P<0.01). Bölgeler arası hissedilen sıcaklık farkı yaklaşık 5.5 °C iken, kafes katları arasında 4.5 °C olarak gerçekleşmiştir. Kümesin farklı bölgelerindeki yumurtaların sadece sarı çapı ve sarı yüksekliği farklı iken (P<0.01), kafes katları arasında ise ak yüksekliği, Haugh birimi, sarı çapı ve sarı yüksekliği farklı bulunmuştur (P<0.05). Hissedilen sıcaklığın yumurta üretim kümeslerinde uygulamaya koyulmasının iklimsel çevre-verim, performans, ürün kalitesi ilişkisini daha iyi yansıtabileceği düşünülmektedir. Anahtar kelimeler: Çevre denetimli kümes, yumurta, hissedilen sıcaklık, yumurta kalitesi.
477
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Relation Between Sensible Temperature And Egg Quality in Environmentally Controlled House Kadir ERENSOY1,*, Ali ALTAN2, Musa SARICA1, Hakan BAYRAKTAR2 1
Ondokuz Mayıs University, Faculty of Agriculture, Department of Animal Science, Samsun, Turkey 2 Ege University, Faculty of Agriculture, Department of Animal Science, İzmir, Turkey *Responsible author e-mail:
[email protected]
Abstract The studies has intensified in this area since the climatic environment of the poultry houses has been found to significantly affect the yield, performance and product quality of laying hens. The sensible temperature that is recently on agenda is a quite new concept for poultry farms. This study was conducted in an environmentally controlled house containing 8-tier cage system. The house was divided into 3 zones according to the distance to the ventilation fans. Eggs were collected from top, middle and bottom cages of these three different regions; and egg weight, shell ratio, albumen height, Haugh unit, yolk width, yolk height and yolk index were determined as quality parameters. The relations between sensible temperature, cage tier and egg quality were investigated in this study. The sensible temperatures were significantly different between zones and cage levels in the house (P<0.01). The temperature difference between the zones was about 5.5 °C, while the temperature difference between the cage levels was about 4.5 °C. Eggs in different zones of the house only differed in yolk width and yolk height, while albumen height, Haugh unit, yolk width and yolk height were found to be different among the cage levels (P<0.01, P<0.05). It is considered that taking place the sensible temperature in the egg production houses may better reflect between the climatic environment and efficiency, performance, product quality. Key words: Sensible temperature, egg quality, controlled environment, egg production.
478
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Kekliklerde (Alectoris Chukar) Yetiştirme Sistemi, Kesim Yaşı ve Cinsiyetin Bazı Et Kalite Özellikleri Üzerine Etkisi Mehmet Akif BOZ1, Musa SARICA2, Umut Sami YAMAK2, Fatih ÖZ3, Kadir ERENSOY2,* Bozok Üniversitesi, Ziraat Fakültesi, Zootekni Bölümü, Yozgat, Türkiye Ondokuz Mayıs Üniversitesi, Ziraat Fakültesi, Zootekni Bölümü, Samsun, Türkiye 3 Atatürk Üniversitesi, Ziraat Fakültesi, Gıda Mühendisliği Bölümü, Erzurum, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2
Özet Bu çalışmada yetiştirme sistemi, kesim yaşı ve cinsiyetin kınalı kekliklerde (A. chukar) göğüs ve but eti besin madde ve yağ asitleri içeriği üzerine etkisi belirlenmiştir. Bu amaçla, göğüs ve but etinde kuru madde, ham protein, ham kül, ham yağ ve yağ asitleri kompozisyonu ortaya koyulmuştur. Çalışmanın hayvan materyalini kapalı ve serbest gezinmeli sistemde 14, 16 ve 18 hafta süreyle yetiştirilen erkek ve dişi kınalı keklikler oluşturmuştur. Göğüs ve but eti örneklerinden 2 tekerrürlü toplamda 48 adet örnek üzerinde analizler gerçekleştirilmiştir. Analizler -18/-22 °C’de muhafaza edilen et örnekleri üzerinde yapılmıştır. Göğüs etinde kuru madde ve protein, but etinde ise yağ oranı daha yüksek bulunmuştur. Göğüs etinde but etine göre toplam doymuş yağ asitleri oranı daha yüksektir (%45.56’ya %35.69). But etinde toplam tekli (%33.64’e %28.49) ve toplam aşırı (%30.68’e 25.95) doymamış yağ asitleri, ∑n3 (%0.95’e %0.73), ∑n6 (%29.38’e 24.84) ve ∑n9 (%30.56’ya 25.63) yağ asitleri oranı göğüs etine göre daha yüksektir. Göğüs etinde C12, C14, C16, C18, C18:1n9t; but etinde ise C15, C18:1n9c, C18:2n6c, C20:2, C22:1n9 ve C22:6n3 yağ asitleri ile besleyici değer indeksi daha yüksek bulunmuştur. But etinde; ham yağ, C18:2n6, toplam aşırı doymamış yağ asitleri ve ∑n6 kapalı sistemde; C18, C22:1n9, C22:6n3, toplam doymuş yağ asitleri ve ∑n3 ise serbest gezinmeli sistemde daha yüksek bulunmuştur. Erkek kekliklerde C12 ve C18:1n9t yağ asitleri daha yüksektir. 14. haftada C12, C18, C22:1n9, C22:6n3, toplam doymuş yağ asitleri daha yüksek bulunmuştur. Göğüs etinde ise C18:2n6c 14. haftada, C22:6n3 18. haftada daha yüksek tespit edilmiştir. Sonuç olarak; bu çalışmada kekliklerde yetiştirme sistemi, kesim yaşı ve cinsiyetin göğüs ve but etindeki bazı özellikler üzerine etkisinin önemli olduğu görülmüştür. Anahtar kelimeler: Kınalı keklik, yetiştirme sistemi, kesim yaşı, cinsiyet, yağ asitleri, et kalitesi.
479
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Effects of Production System, Slaughter Age and Gender on Some Meat Quality Traits in Partridges (Alectoris Chukar) Mehmet Akif BOZ1, Musa SARICA2, Umut Sami YAMAK2, Fatih ÖZ3, Kadir ERENSOY2,* 1
2
Bozok University, Faculty of Agriculture, Department of Animal Science, Yozgat, Turkey Ondokuz Mayıs University, Faculty of Agriculture, Department of Animal Science, Samsun, Turkey 3 Atatürk University, Faculty of Agriculture, Department of Food Engineering, Erzurum, Turkey *Responsible author e-mail:
[email protected]
Abstract The effects of production system, slaughter age and gender on nutrient and fatty acid contents were determined in breast and thigh meat of red partridges in this study. For this purpose, the values of dry matter, crude protein, crude ash, crude fat and fatty acids in breast and thigh meat were determined. The animal material of the study was male and female red partridges grown in closed and free-range production system for 14, 16 and 18 weeks. Analyzes were made on a total of 48 samples and 2 replicates of which were breast and thigh meat samples. Analyzes were carried out on meat samples stored at -18 / -22 ° C. Dry matter and protein were found higher in breast meat and fat rate was found higher in thigh meat. The proportion of total saturated fatty acids is higher in breast meat than in thigh meat (%45.56 to %35.69). Total monounsaturated (%33.64 to %28.49) and total polyunsaturated fatty acids (%30.68 to 25.95) in thigh meat; ∑n3 (%0.95 to %0.73), ∑n6 (%29.38 to 24.84) and ∑n9 (%30.56 to 25.63) the ratio of fatty acids is higher than breast meat. While nutritive value index and C15, C18:1n9c, C18:2n6c, C20:2, C22:1n9 ve C22:6n3 fatty acids were found higher in thigh meat; C12, C14, C16, C18, C18:1n9t fatty acids only were found higher in breast meat. Crude fat, C18:2n6, total polyunsaturated fatty acids and ∑n6 in closed system; total saturated fatty acids and ∑n3 were found higher in free-range system in thigh meat. Male partridges meat have higher C12 and C18: 1n9t fatty acids. C12, C18, C22: 1n9, C22: 6n3 and total saturated fatty acids were found higher at 14 weeks. In the breast meat, C18: 2n6c at 14th week and C22: 6n3 fatty acids at 18th week were detected higher. It was seen that the effect of the production system, slaughter age and gender on some traits of the breast and thigh meat was found important in this study. Key words: Red partridges, production system, slaughter age, gender, fatty acids, meat quality.
480
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Hayvancılık İşletmelerindeki Atık Yönetimi Uygulamalarının Tarla Tarımı Üzerine Etkileri: Derleme Kayahan YILMAZ1,*, Korkmaz BELLİTÜRK2 Namık Kemal Üniversitesi, Ziraat Fakültesi, Zootekni Bölümü, Süleymanpaşa-Tekirdağ, Turkey Namık Kemal Üniversitesi, Ziraat Fakültesi, Toprak Bilimi ve Bitki Besleme Bölümü, SüleymanpaşaTekirdağ, Turkey *Sorumlu yazar e-posta:
[email protected] 1
2
Özet Türkiye’deki hayvancılık işletmelerinden fazla miktarda hayvansal ve bitkisel kaynaklı atıklar ortaya çıkmaktadır. Bu atıkların kompost veya vermikompost olarak tarımda kullanılması gerekmektedir. Özellikle tarla tarımı yapılan toprakların organik madde içerikleri çok düşüktür. Tarla tarımında organik atıkların kullanılması son derece önemlidir. Oysaki organik atıklar tarımda hem güre, hem de toprak ıslah maddesi olarak kullanılabilmektedir. Hayvancılık işletmelerindeki uygun olmayan atık yönetimi uygulamaları toprak ve su kirliliği gibi çevre problemlerine sebep olmaktadır. Hayvansal ve bitkisel atıklar mutlak surette kompost and vermikomposta dönüştürülmeli ve tarım alanlarında kullanılmalıdır. Hayvansal atıkların organik gübreye dönüştürülmesi ile kimyasal gübre kullanımı da yıldan yıla azalacaktır. Anahtar kelimeler: Atık yönetimi, livestock, organik gübre, kompost, vermikompost.
481
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Effects of Livestock Waste Management Practices on Field Farming:A Review Kayahan YILMAZ1,*, Korkmaz BELLİTÜRK2 Namık Kemal University, Faculty of Agriculture, Departmant of Animal Science, SüleymanpaşaTekirdağ, Turkey 2 Namık Kemal University, Faculty of Agriculture, Department of Soil Science and Plant Nutrition, Süleymanpaşa-Tekirdağ, Turkey *Responsible author e-mail:
[email protected] 1
Abstract More animal and plant originated wastes comes from livestock management in Turkey. This wastes should be used as compost or vermicompost in agriculture Especially, fields is including very low organic matter. It is very important to use organic wastes in field farming. Whereas organic wastes can be used both as organic fertilizer and as soil improver. Inappropriate applications of waste management systems in livestock enterprises causes environmental problems such as soil and water pollution. Animal and vegetable wastes must be absolutely transformed into compost and vermicompst and also use in field areas. By converting animal waste into organic fertilizer, the use of chemical fertilizers will also decrease year by year. Key words: Waste management, hayvancılık işletmesi, organic fertilizer, compost, vermicompost.
482
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Üç Etkili Bir Absorpsiyonlu Soğutma Sisteminde Kütlesel Akışın İncelenmesi Kenan SAKA1,*, İbrahim Halil YILMAZ2, Recep YAMANKARADENİZ3 Uludağ Üniversitesi, Bursa, Türkiye Adana Bilim ve Teknoloji Üniversitesi, Adana, Türkiye 3 Uludağ Üniversitesi, Bursa, Türkiye *Sorumlu yazar e- posta:
[email protected] 1
2
Özet Üç etkili absorpsiyonlu soğutma sistemleri güneş enerjisi ya da jeotermal enerji gibi yenilenebilir enerji kaynakları ile çalışabilen çevre dostu sistemlerdir. Bu sistemlerin içerisinde yer alan kaynatıcı sayesinde bir ısı kaynağından aldığı enerjiyi kullanarak elektrik kullanımını azaltmaktadırlar. Üç etkili sistemler absorpsiyonlu sistemler içerisinde en yüksek verime sahip olmakla birlikte en fazla sistem elemanına sahip ve diğer türlere göre daha karmaşık sistemlerdir. Su – lityum bromür eriyiği ile çalışan seri akışlı bir üç etkili absorpsiyonlu soğutma sistemin teorik olarak incelendiği bu çalışmada bilgisayar ortamında oluşturulan bir simülasyon kullanılmıştır. Noktasal olarak sistemin termodinamik özelliklerinin hesaplandığı çalışmada sisteminin içerisinde yer alan sekiz farklı akış hattında gerçekleşen kütlesel debi akışının değişimi düşük basınçlı kaynatıcı, yoğuşturucu ve buharlaştırıcı sıcaklığına bağlı olarak verilmiştir. Ayrıca her üç sistem elemanının sıcaklığına bağlı olarak soğutma tesir katsayısındaki değişim de gösterilmiştir. Tablolar üzerinde sistemde yer alan eşanjörlerinde etkilerinin gösterildiği çalışmada düşük basınçlı kaynatıcı ve buharlaştırıcının çalışma sıcaklığının artmasıyla soğutma tesir katsayısı artarken yoğuşturucu sıcaklığının artmasıyla soğutma tesir katsayısında düşüş görülmüştür. Anahtar kelimeler: Üç etkili absorpsiyonlu soğutma sistemi, soğutma tesir katsayısı, kütlesel akış.
483
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Mobilya Sektöründe Sürdürülebilir Bir Kaynak Olarak Ahşap Ve Orman Ürünleri Ali TELLݹ,*, Kerim KARABACAK² ¹ Dumlupınar Ünivesitesi Ktbmyo Türkiye ² Dumlupınar Ünivesitesi Ktbmyo Türkiye * Sorumlu yazar e-posta:
[email protected]
Özet Sürdürülebilir mobilya üretimi, çevreye zarar vermeden mevcut ve gelecekteki insani ihtiyaçların karşılanması için ahşap ve orman ürünlerinin stratejik kullanımını içermektedir. Toplumun talepleri, çevre ve ekonomi arasındaki dengesizliklerin ve değiş tokuşlar ile başa çıkılması ve nihayetinde önceden verilen hasarın restorasyonu için ürün, işlem, hizmet ve sistemlerin üretilmesini kapsamaktadır. Son yıllarda tüm üretim dallarında olduğu gibi, mobilya üretimindede kullanılan ahşap ve orman ürünleri ile yapılan üretimler önem kazanmaktadır. Bunun nedeni, dünyamızda ki doğal kaynakların sınırlı, buna karşın insan ihtiyaçlarının sınırsız olmasından kaynaklanmaktadır. Bu nedenle, ahşap ve orman ürünlerinden yapılan ürünler günümüzde oldukça ilgi çekmektedir. Bu ürünlerin ortak özellikleri arasında çevre dostu, sürdürülebilir, çevre üzerinde en az zarar veren etkiye sahip olması ve en ekonomik kullanımlı olmaları vardır. Ahşap ve orman ürünleririn diğer özellikleri ise yenilenebilir, geri dönüşümlü, katkı maddesi içermemesi ve çevre üzerinde en az bozucu etkisinin olmamasıdır. Ormancılık faaliyetleri sonucu elde edilen asli ürünler, Orman ürünleri sanayinin hammaddesini oluşturmakta ve bu sektörce işlenerek katma değeri daha yüksek ara ve son ürünlere dönüştürülmektedir. Hammaddesinin yenilenebilir bir kaynak olması ve coğrafi olarak ülke geneline yayılmış olması, mobilya sektörü işletmelerini hem sürdürülebilir kalkınma hem de yerel ekonomi açısından önemli kılmaktadır. Bu malzemelerin kullanılması hem yeni biçimlendirme olanaklarını hem de kullanım kolaylığını sağlamamaktadır. Bu çalışmada, mobilya sektöründe, sürdürülebilirlik kavramlarının gerekliliklerini nasıl karşıladıklarının gösterilmesi amaçlanmaktadır. Mobilya sektörünün sahip olduğu özellikler bakımından, sürdürülebilirliği sağlayabileceği sonucuna varılmıştır. Anahtar kelimeler: Mobilya sektörü, Orman Ürünleri, Sürdürülebilirlik.
484
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Wood and Wooden Products as a Sustainable Source in the Furniture Sector Ali TELLݹ,*, Kerim KARABACAK² ¹ Dumlupınar Unniversty Ktbmyo Turkey ² Dumlupınar Unniversty Ktbmyo Turkey * Responsible author e-mail:
[email protected]
Abstract Sustainable Furniture production involves the strategic use of Wood and forest products to meet current and future human needs without compromising the environment. It includes products, processes, services or systems to tackle imbalances or trade-offs between the demands of society, the environment and the economy and, ultimately, restoration of damage already done. As like in all design production, Wood and forest products used in furniture produce are becoming very important. This is because of the fact that, natural resources are limited, whereas human wants are unlimited in our world. For this reason, produce made of Wood and forest products are becoming very interesting nowadays. The common characteristics of these produce comprise the most environment friendly, sustainable, the least distorting effect on environment and the most economical usage. The most important characteristics of these Wood and forest products are that they are renewable, recyclable, free from addicted materials, and least distortive effect on environment. The application of these materials provides both simplicity and figuration. In addition to these using Wood and forest products gives shapes to the furniture and usage. Primary wood products obtained as a result of forestry activities constitute the raw material of the forest industry and they are converted to the higher value-added products by processing. Furnitue sector industry is important both for sustainable development and the regional economy since its raw material is a enewable resource and it spreaded out throughout the country geographically. In this study, it is aimed to introduce how furniture sector meet the requirements of the concepts of sustainability. It is concluded that the properties owned by the forest products industry contribute to sustainability. Key words: Furniture sector, Forest Products, Sustainability.
485
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Genetik Algoritma Kullanılarak Hibrit Yenilenebilir Enerji Kaynaklarının Maliyet Minimizasyonu Kerim KARABACAK1,*, Ali TELLİ1 1
Dumlupınar Üniversitesi, Kütahya Teknik Bilimler MYO, Elektronik ve Otomasyon Bölümü, Kütahya, Türkiye *Sorumlu yazar e-posta:
[email protected]
Özet Bu yazıda fotovoltaik panel, rüzgar jeneratörü ve batarya içeren bir hibrit yenilenebilir enerji sistemi önerilmiştir. Sistemin maliyet fonksiyonları belirlenmiştir. Her bir yenilenebilir enerji modülü (PV, rüzgar jeneratörü, akü) için güç-maliyet ilişkileri belirlenmiştir. Önerilen yenilenebilir enerji sisteminin toplam maliyetini en aza indirmek için Genetik Algoritma kullanılmıştır. Genetik algoritma için hesaplamaları basitleştirmek için maliyet katsayısı tanımları yapılmıştır. Geleneksel arama algoritmalarının aksine; hesaplama zamanı ve hesaplama çabasını azaltmak için genetik algoritmanın olasılık yaklaşımı kullanılmıştır. Sonuçlarda genetik algoritmanın yenilenebilir enerji maliyet optimizasyonu problemleri için hesaplama çabalarını azaltmak için geleneksel arama algoritmalarından daha uygun olduğu gösterilmiştir. Anahtar kelimeler: Genetik algoritma, Hybrid yenilenebilir enerji sistemleri, yenilenebilir enerji.
486
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Cost Minimization of Hybrid Renewable Energy Systems Using Genetic Algorithm Kerim KARABACAK1,*, Ali TELLİ1 1
Kutahya Technical Sciences Vocational School, Dumlupinar University, Turkey *Responsible author e-mail:
[email protected]
Abstract In this paper, a hybrid renewable energy system is proposed which includes PV, wind generator and batteries. Cost functions of whole system is determined. Power-cost relations for each renewable energy module (PV, wind generator, battery) are inspected. Genetic algorithm is used to minimize the total cost of proposed renewable energy system. For genetic algorithm, cost coefficient definitions are made for simplifying calculations. Beside conventional search algorithms, genetic algorithm’s probabilistic approach is used for reducing calculation time and computation effort. In results, it is shown that genetic algorithm is more suitable than conventional search algorithms for reducing computation effort for renewable energy cost optimization problems. Key words: Hybrid renewable energy system, renewable energy, genetic algorithm, cost minimization, optimization, HRES.
487
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Kati Atiktan Enerji Üretim Tesisi Yer Seçimi Problemi için Yeni Bir Bulanik Karar Verme Yaklaşimi Kezban BULUT1,*, Alpay TUNÇ1 Kırıkkale Üniversitesi, Kırıkkale, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
Özet Katı atıklar kullanım süresi dolan ve bulunduğumuz çevreden uzaklaştırılması gereken malzemeler olarak nitelendirilebilir. Bu atıklar evlerde, okullarda, bahçelerde, sanayide oluşabilmektedirler. Artan nüfus, kentleşme ve sanayi atık oluşumunu hızla artırmaktadır. Atık oluşumunun artması özellikle gelişmekte olan ülkelerde oldukça önemli bir problem haline gelmektedir. Bu sebeple katı atık yönetimi ve katı atıktan enerji üretimi büyük önem kazanmıştır. Bu çalışmada, Kırıkkale’de kurulması planlanan katı atıktan enerji üretim tesisi için alternatif yerler içerisinden en uygun olanın seçilmesi amaçlanmıştır. Alternatifler ve seçimi etkileyen kriterler literatür araştırması ve uzman görüşü alınarak belirlenmiştir. Uygulama aşamasında ise Analitik Hiyerarşi proses yöntemi ile Bulanık Topsis yöntemleri sentezlenmiştir. Analitik Hiyerarşi proses yöntemi kriter ağırlıklarının belirlenmesi, Bulanık Kararsız Topsis yöntemi ise alternatiflerin sıralanması aşamasında kullanılmıştır. Çalışma sonucunda dört farklı alternatif içinden en uygun olanı belirlenmiştir. Anahtar kelimeler: Katı Atık Yönetimi, Katı Atıktan Enerji Üretimi, Analitik Hiyerarşi Proses, Bulanık Kararsız Topsis Yöntemi.
488
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
A Fuzzy Decision Making Approach for Selection A Solid Waste Energy Production Plant Problem Kezban BULUT1,*, Alpay TUNÇ1 Kırıkkale University, Kırıkkale, Türkiye *Responsible author e-mail:
[email protected] 1
Abstract Any expired materials that we need to remove from our environment are called solid waste. Solid wastes can occur at home, at school, at the hospital, in the industry, in the gardens, and in many other places and it includes of everyday items such as product packaging, grass clippings, furniture, clothing, bottles, food scraps, newspapers, appliances, paint and batteries. Increasing population, urbanization and industrialization increase the amount of solid waste generated rapidly and it is becoming a bigger problem for cities of developing countries. For this reason solid waste energy production is become a very popular and important issue. In this paper fuzzy decision making approach is applied to select the best location for the construction of a solid waste energy plant in the Kırıkkale city. Alternative plant location and criteria are defined from the expert opinions and literature. Case study is consist of two main phase. In first stage ; Analytic Hierarchy process (AHP) method is used for determination of criteria weights and second stage Fuzzy Topsis Method is used for defining the best location. Finally the best alternative location is selected from the four alternatives. Key words: Solid Waste Management, Solid Waste Energy Production, Analytic Hierarchy Process, Hesitant Fuzzy Topsis Method.
489
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürdürülebilirlik Etiği: Çevre-merkezci Etik Yaklaşım Kıvılcım Akkoyunlu Ertan1,*, Birol Ertan2 Türkiye ve Ortadoğu Amme İdaresi Enstitüsü (TODAİE), Türkiye 2 Rumeli Üniversitesi, İstanbul, Türkiye *Sorumlu yazar e-posta:
[email protected]
1
Özet Çevre ve insan arasındaki ilişkiler, insanın çevreye yönelik tavır, davranış ve düşünceleri çerçevesinde belirlenmiştir. Çevre sorunlarının insanın ve diğer canlıların sağlığını tehdit etmesi ve ekolojik dengeyi bozması sonucu çevreye yönelik duyarlılık da gelişmeye başlamıştır. Çevre duyarlılığıyla birlikte, çevre etiği yaklaşımlarının da gelişmesine tanık oluyoruz. İlk aşamada çevreye yönelik davranışlarımızın duygularımızı ve düşüncelerimizi belirleyen etik yaklaşım “insan-merkezci etik” ortaya çıkmıştır. İnsan-merkezci etik yaklaşımda çevre sorunlarının bireyi, toplumu ve bütün olarak insanlığı tehdit ettiği bu nedenle de çevre korumak düşüncesinin gerektiği anlayışı egemendir. Etik ilgi alanının genişlemesi sonucunda ikinci tür etik yaklaşım ortaya çıkar ve çevreye yalnızca insanlar için değil hayvanlar ve bitkileri de içeren (Dünya gezegenindeki yaşamı kapsayacak biçimde) bütün canlılar için koruma düşüncesi belirir. İkinci tür etik yaklaşım bütün canlıları koruma düşüncesinden hareket ettiği için “canlı-merkezci etik” olarak isimlendirilmiştir. Geçtiğimiz yüzyılın sonlarına ve 21. Yüzyıla egemen olan çevre etiği yaklaşımı ise “çevre-merkezci etik olarak isimlendirilmekte ve çevrenin korunması gerektiği düşüncesini ortaya koymaktadır. Çevre-merkezci etik yaklaşım; bütün canlı ve cansız varlıkların korunması, çevrenin ekolojik bütünlüğünün korunmasını da içerdiği için bütüncüllük (holizm) ve sürdürülebilirlik ilkelerini temel almaktadır. Bu çerçevede yeni yüzyılın etik yaklaşımı, sürdürülebilir çevre etiği olarak çevre-merkezci etik yaklaşım olmak durumundadır. Anahtar kelimeler: Sürdürülebilirlik, etik, çevre etiği, çevre-merkezci etik.
490
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sustainability Ethics: Eco-centric Ethical Approach Kıvılcım Akkoyunlu Ertan1,*, Birol Ertan2 Türkiye ve Ortadoğu Amme İdaresi Enstitüsü (TODAİE), Türkiye 2 Rumeli Üniversitesi, İstanbul, Türkiye *Sorumlu yazar e-posta:
[email protected]
1
Abstract The relationship between the environment and people is determined within the framework of the attitude, behaviour and thoughts of the person towards the environment. Environmental problems threaten the health of human beings and other living things, and the ecological balance has deteriorated and the sensitivity towards the environment has also begun to develop. Together with environmental awareness, we are witnessing the development of environmental ethics approaches. At the first stage, the ethical approach to our emotions and our thoughts about our behaviour towards the environment has emerged as "antropocentric ethics". Because of the antropocentric ethical approach, environmental problems threaten the individual, society, humanity and the Earth planet as a whole. As a result of the expansion of ethical interest, a second type of ethical approach emerges, and the conservation for all living things, including animals and plants, not only for humans but also for the environment (for the life at Earth), is manifested. The second type of ethical approach has been called "bio-centric ethics" which grows out of an idea of preservation of all living beings. The approach of environmental ethics, which dominated the end of the century and the beginning of the 21st century, is called "eco-centric ethics" and emphasizes that the environment should be protected. Ecocentric ethical approach; is based on the principles of holism and sustainability, since it includes the protection of all living and non-living beings (also future generations) and the preservation of ecological integrity of the periphery. The ethical approach of the new century in this framework is to be an eco-centric ethical approach as sustainable environmental ethics. Key words: Sustainability, ethics, environmental ethics, eco-centric ethics.
491
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Vermikompostun Trakya İlkeren/5BB Aşı Kombinasyonundaki Asma Fidanlarının (Vitis vinifera L.) Sürgün Gelişimine Etkisi Bekir AÇIKBAŞ1, Korkmaz BELLİTÜRK2* Tekirdağ Bağcılık Araştırma Enstitüsü, Süleymanpaşa-Tekirdağ, Turkey Namık Kemal Üniversitesi, Ziraat Fakültesi, Toprak Bilimi ve Bitki Besleme Bölümü, SüleymanpaşaTekirdağ, Turkey *Sorumlu yazar e-posta:
[email protected] 1
2
Özet Bu çalışma 10 litrelik saksılarda topak+torf+perlit karışımına vermikompostun % 0 (kontrol), % 10, % 20, % 30 ve %40 oranında ilave edilmesiyle yapılmıştır. Araştırma, tesadüf parselleri deneme desenine göre açık koşullarda Tekirdağ şehrinde yapılmıştır. Elde edilen bitki yetiştirme ortamlarının, 5BB asma anacına aşılı Trakya İlkeren çeşidine ait asma fidanlarının vejetatif gelişme özelliklerinden sürgün uzunlukları ile yaş ve kuru ağırlıklarına etkisinin karşılaştırılması amaçlanmıştır. Araştırma sonucunda vermikompostun denemeye konu edilen asma fidanlarının incelenen sürgün parametreleri üzerine etkisinin istatistiksel öneme sahip olduğu belirlenmiştir. Araştırmada, fidan gelişme ortamına ilave edilen % 20 oranında vermikompost uygulanmasının diğer uygulamalara göre daha olumlu sonuçlar verdiği tespit edilmiştir. Vermikompost, toprak solucanlarının farklı organik atıkları sindirim sistemlerinden geçirmeleri sonucunda oluşan kompost çeşidi olup, tarımsal kullanım, toprak ıslahı ve toprak sağlığı için kullanılır. Sonuçta bu çalışma inek gübresinden elde edilen vermikompostun bağcılıkta kullanılmasıyla sürdürülebilir tarım yapılabileceğini tavsiye etmektedir. Anahtar kelimeler: Vitis vinifera L., vermikompost, asma fidanı, sürgün gelişimi.
492
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Vermicompost Affects Shoot Growth of Trakya Ilkeren/5BB Grafting Combination Grapevine (Vitis vinifera L.) Saplings Bekir AÇIKBAŞ1, Korkmaz BELLİTÜRK2* Tekirdağ Viticulture Research Institution, Süleymanpaşa-Tekirdağ, Turkey Namık Kemal University, Faculty of Agriculture, Department of Soil Science and Plant Nutrition, Süleymanpaşa-Tekirdağ, Turkey *Responsible author e-mail:
[email protected] 1
2
Abstract This research was carried out on 10 liter pots and soil+turf+perlite mixture of five different vermicompost doses (0% control, 10%, 20%, 30% and 40%). The experiment was setup random parcels trail design at open conditions in Tekirdag city. It is aimed to compare the effects of grapevine saplings on shoot lengths, shoot fresh and dry weight, which are vegetative developmental characteristics. As a result of the research, it is found that the effects of vermicompost on shoot parameters of the grapevine saplings included in the study are significant statistically. It is found in our study that the application of 20% vermicompost included in the sapling nutrition environment bring more positive results compare to other applications. Vermicompost is a process where earthworms are used the transform different organic waste products into organic fertilizers for agricultural use and a soil amendments to improve soil health. Finally, our study recommended for the application of vermicompost from cow manure using viticulture for sustainable agriculture. Key words: Vitis vinifera L., vermicompost, grapevine sapling, shoot growth.
493
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Günışığı Aydınlatma Sistemleri Kullanımıyla Enerji Tasarrufu Ve Co2 Salınımının Önlenmesi Kübra BİRCAN1,*Furkan DİNÇER1, Şaban YILMAZ1 Kilis 7 Aralık Üniversitesi, Elektrik-Elektronik Mühendisliği, Kilis, Türkiye * Sorumlu yazar e-posta:
[email protected]
1
Özet Yenilenebilir enerjinin kullanımı ve enerji tasarrufu günümüzde büyük önem taşımaktadır. Aydınlatma alanında enerji sarfiyatı ise önemli bir yüzdeliği oluşturmaktadır. Bu durumda aydınlatmada enerji tasarrufuna gidilmelidir. Gün ışığı aydınlatma sistemleri tercih edilmeli, böylece günlük güneşlenme süresi içinde yapay aydınlatma kullanmayarak enerji tasarrufu yapılmalıdır. Bu sistem sayesinde enerji tasarrufu yapılabildiği gibi çevre dostu olması sayesinde doğaya zararlı CO2 salınımının da önüne geçilmektedir. Bu çalışmada; gün ışığı aydınlatma sistemi kullanılarak elde edilecek enerji tasarrufu, elde edilecek maddi kazanç ve önlenecek CO2 salınımı üzerinde durulmuştur. Örnek bir iş yerinde yapay aydınlatma yerine, günışığı aydınlatma yöntemi kullanılarak bir yılda ne kadar enerji tasarrufu yapılabileceği, ne kadar CO2 salınımının önüne geçileceği hesaplanarak işletmelere örnek olunması ve iç piyasaya entegre edilmesi hedeflenmektedir. Anahtar kelimeler: Günışığı aydınlatma, enerji tasarrufu, CO2 salınımı.
494
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Energy Saving And Preventing Release Of Co2 By Using Daylight System Kübra BİRCAN1,*, Furkan DİNÇER1, Şaban YILMAZ1 Kilis 7 Aralık Üniversitesi, Elektrik-Elektronik Mühendisliği, Kilis, Türkiye * Responsible author e-mail:
[email protected]
1
Abstract The use of renewable energy and energy saving are of great importance nowadays. Energy consumption in the field of illumination is an important percentage. In this case, lighting should be used for energy saving. Daylight lighting systems should be preferred, so energy saving should be done by not using artificial lighting in the sunshine day. Thanks to this system, as well as energy saving, environmentally friendly, harmful CO2 emissions can be prevented. In this study; Energy savings to be achieved by using daylight illumination system, financial gain to be achieved and CO2 emissions to be avoided. Instead of using artificial lighting in a sample workplace, it is aimed to calculate how much energy can be saved in one year by using day lighting method, how much CO2 emission will be prevented, and set an example for the enterprises and to be integrated into the internal market. Key words: Day lighting, energy saving, CO2 emission.
495
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Güneş Kulelerinin Ülkemizde Ve Dünyadaki Potansiyeli Ve Mevcut Durumu Kübra BİRCAN1,*, Furkan DİNÇER1, Şaban YILMAZ1 Kilis 7 Aralık Üniversitesi, Elektrik-Elektronik Mühendisliği, Kilis, Türkiye * Sorumlu yzar e-posta:
[email protected]
1
Özet Dünyada enerji tüketiminin hızlı bir şekilde artması ve var olan mevcut enerji kaynakları olan fosil kaynakların azalması ile birlikte yeni enerji kaynaklarının arayışı hız kazanmaktadır. Bu noktada çözüm olarak yenilenebilir enerji kaynakları görülmektedir. Yenilenebilir enerji kaynaklarından olan güneş enerjisi ise ön plana çıkmaktadır. Güneş enerjisinden fotovoltaik sistemler ve ısıl sistemler olmak üzere iki farklı yöntemle enerji elde edilmektedir. Bu çalışmada ise ısıl sistemlerden birisi olan güneş kuleleri yani konsantre termal güneş enerjisi santralleri(CSP) ayrıntılı olarak ele alınarak; çevre açısından etkileri, dünyada bu zamanda kadar yapılmış ve yapılmakta olan güneş kuleleri ile birlikte, ülkemizdeki güneş kulelerine yönelik olarak yapılan çalışmalar ele alınmaktadır. Bu sayede ülkemizin diğer ülkelere göre durumu değerlendirilerek gerekli yatırımların yapılmasına katkı sağlayacağı ön görülmektedir. Anahtar kelimeler: Güneş kuleleri potansiyeli, yenilenebilir enerji, temiz çevre.
496
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Potantial And Current Situation Of Solar Towers In Turkey And World Kübra BİRCAN1,*, Furkan DİNÇER1, Şaban YILMAZ1 Kilis 7 Aralık Üniversitesi, Elektrik-Elektronik Mühendisliği, Kilis, Türkiye * Responsible author e-mail:
[email protected]
1
Abstract With the rapid increase in energy consumption in the world and the reduction of existing fossil resources, the search for new energy sources is accelerating. At this point, renewable energy sources are seen as a solution. Solar energy from renewable energy sources is at the forefront. Energy is obtained from solar energy by two different methods; photovoltaic systems and thermal systems. In this study, the solar thermal power plants (CSP), which is one of the thermal systems, are discussed in detail. The effects of the environment, the sunshades built and being made up to this time in the world, together with the work done for the solar towers in our country are taken into consideration. In this way, it is expected that our country will be able to evaluate the situation according to other countries and contribute to the necessary investments. Key words: Potential of solar tower, renewable energy, clean environment.
497
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Alüminyum Curuflarından Metal Geri Dönüşümünün Ekolojik Sürdürülebilirlik Açısından Önemi Mahir ÇEVİK1,*, Alaaddin GÜNDEŞ 2, Adnan KÜÇÜKÖNDER3 Kahramanmaraş Sütçü İmam Üniversitesi Fizik Bölümü, Kahramanmaraş, Türkiye Kahramanmaraş Sütçü İmam Üniversitesi, Teknik Bilimler Meslek Yüksek Okulu, Kuyumculuk ve Takı Tasarımı Bölümü, Kahramanmaraş, Türkiye 3 Kahramanmaraş Sütçü İmam Üniversitesi Fizik Bölümü, Kahramanmaraş, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2
Özet Hızlı nüfus artışı, teknolojik gelişmeler ve sanayileşmeyle birlikte insanlığın enerjiye ve doğal kaynaklara olan ihtiyacı günden güne artmaktadır. Bu süreçte doğal kaynaklarımız hızla tüketilmekte ve bu tüketim sonucunda da çevreye ciddi büyük zararlar verilmektedir. Bu çalışmamızda alüminyum curufunun tekrar alüminyum olarak geri dönüşümünü sağlamaya ve bu curufun çevreye vermiş olduğu zararları ortadan kaldırmaya çalıştık. Bu dönüşüm sürecinde alüminyum curuflarından % 98,37 saflık oranında alüminyum metali dönüşümü elde edilmiştir. Bu süreçte ortaya çıkan ve tehlikeli bir atık olan tuz keklerinin hidrometalurjik yöntemle geri kazanılması sağlanmıştır. Bu geri dönüşüm sayesinde %95 oranında enerji tasarrufu sağlanmıştır ve bu atıkların çevreye olan zararlı etkileri bu süreçte ortadan kaldırılmaya çalışılmıştır. Bu süreçte, alüminyum geri dönüşümünün, enerji, hava kirliliği ve su kirliliğini önleyen ve birincil alüminyum üretiminin hammaddesi olan boksit cevheri rezervlerinin tüketimini azaltan çevre dostu bir teknoloji olduğu görülmektedir. Anahtar kelimeler: Alüminyum, Alüminyum Curufu, Geri Dönüşüm.
498
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
In Terms of Ecological Sustainability The Importance of The Recycling of Metal from Aluminum Dross Mahir ÇEVİK1,*, Alaaddin GÜNDEŞ 2, Adnan KÜÇÜKÖNDER3 Kahramanmaraş Sütçü İmam Univesity Faculty of Secience&Ar Departmen of Physicst , Kahramanmaraş, Turkey 2 Kahramanmaraş Sütçü İmam Univesity Faculty of Technical Secience&Ar Departmen of Jewelery and jewelry design, Kahramanmaraş, Turkey 3 Kahramanmaraş Sütçü İmam Univesity Facultyof Secience&Ar Departmen of Physicst , Kahramanmaraş, Turkey *Responsible author e-mail:
[email protected] 1
Abstract With rapid population growth, technological developments and industrialization, mankind's need for energy and natural resources is increasing day by day. In this process, our natural resources are rapidly consumed, and as a result of this consumption, serious damage is given to the environment. In this work, we tried to recycle the dross of aluminum again as aluminum and remove the damages that this dross had given to the environment. In this recycle process; aluminum metal recycle was obtained at a purity of 98.37% from aluminum dross. Hydrometallurgical recovery of salt cakes, which is a dangerous waste, has been achieved in this process. This recycling provided 95% saving energy and the harmful effects of these wastes on the environment have been tried to be removed in the process. In this process, it is seen that aluminum recycling is an environmentally friendly technology of prevents the consumption of energy, air pollution and water pollution and reduces the consumption of bauxite ore reserves, which is the raw material of primary aluminum production. Key words: Aluminum, Aluminum Dross, Recycling.
499
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
A Case Study To Design Pv Solar Energy System For A Rezidance in Kahramanmaraş-Turkey Mahir ÇEVİK1,*, Abdulkadir YILDIZ 2, Kemal DELİHACIOĞLU3 Kilis 7 Aralık Univesity Facult of Engineering and Architecture Electrical and Electronics Engineering Department,Kilis, Turkey 2 Kahramanmaraş Sütçü İmam Univesity Facultyof Secience&Ar Departmen of Physicst , Kahramanmaraş, Turkey 3 Kilis 7 Aralık Univesity Facult of Engineering and Architecture Electrical and Electronics Engineering Department,Kilis, Turkey *Responsible author e-mail:
[email protected] 1
Abstract In this study, a photovoltaic solar energy system is considered to be installed on the roofs of a residence, which hosts five blocks, a swimming pool, Turkish bath, sauna and steam room, as a case study in Kahramanmaras-Turkey. A 37.5 kWh PV installed energy system is designed for the residence to support the electricity energy need, reduce the monthly expenses, contribute to green environment and minimize important energy dependence. The installation costs (on-grid and off-grid) and the feasibility of such a system in these places are analysed and evaluated by calculating the energy amount over a period of year from SMA DESING programme. The advantages and disadvantages of solar energy PV energy systems in buildings and the similar complexes are discussed for the conditions of Kahramanmaras-Turkey. Key words: Solar Energy, Buldings, Renewable energy, Photovoltaic System.
500
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Bir Gaz Türbininin Enerji Ve Ekserji Analizi Mehmet ALTINKAYNAK1,*, Emirhan TANRIÖVER2, Arzu ŞENCAN ŞAHİN3, A. Kemal YAKUT 4 Süleyman Demirel Üniversitesi, Isparta, Türkiye Süleyman Demirel Üniversitesi, Isparta, Türkiye 3 Süleyman Demirel Üniversitesi, Isparta, Türkiye 4 Süleyman Demirel Üniversitesi, Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected] 1 2
Özet Artan enerji taleplerine yeni enerji santralleri yatırımları çare olarak aranmaktadır. Aynı zamanda mevcut santralleri iyileştirerek artan enerji talebinin bir bölümü karşılanmış olur. Son yıllarda elektrik üretme yöntemlerinden biri olan doğalgaz ile elektrik üretmektir. Bu işlem gaz türbinleri ile yapılmaktadır. Gaz türbinli enerji üretim sistemlerine olan talepler sürekli olarak artmaktadır. Verimlilik, güvenilirlik, çevre duyarlılığı ve kârlılık gitgide daha büyük önem kazanmaktadır. Bir gaz türbininin etkinliğini arttırmak için daha yüksek basınçlarla ve sıcaklıklarla çalışmak gerekir. Gaz türbinleri günümüzde yaklaşık 1.500 derece sıcaklıkta çalışmaktadır. Bu çalışmada Türkiye’de bulunan bir gaz türbininin enerji ve ekserji analizi yapılmıştır. Her bir nokta için entalpi, entropi, basınç ve sıcaklık değerleri termodinamik tablolarından bulunarak tablolar halinde sunulmuştur. Sistem için termodinamik kanunlarına dayanarak kütle, enerji ve ekseri dengeleri kurulup enerji ve ekserji verimleri hesaplanmıştır. Ekserji yıkımlarının ve enerji kayıplarının yüksek olduğu yerler saptanmış, iyileştirmeler için tavsiyelerde bulunulmuştur. 520 MW güç üreten türbinin 257 MW’lık gücü kompresörde kullanılmakta ve gaz türbininin net güç çıkışı 262 MW’dır. Yakıt olarak kullanılan doğal gazın kimyasal bileşenlerine göre enerji ve ekserjisi, kompresör işi ve kompresör girişindeki çevre sıcaklığına göre verim değişimleri, türbin verimi ve türbin giriş sıcaklığına göre verim değişimleri ayrı ayrı incelenmiştir. İncelemeler sonucu literatürdeki çalışmalarla paralellik gösterdiği görünmüştür. Anahtar kelimeler: Gaz Türbini, Enerji, Ekserji, Termodinamik.
501
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Energy And Exergy Analysis Of A Gas Turbine Mehmet ALTINKAYNAK1,*, Emirhan TANRIÖVER2, Arzu ŞENCAN ŞAHİN3, A. Kemal YAKUT 4 Süleyman Demirel University, Isparta, Turkey Süleyman Demirel University, Isparta, Turkey 3 Süleyman Demirel University, Isparta, Turkey 4 Süleyman Demirel University, Isparta, Turkey *Responsible author e-mail:
[email protected] 1 2
Abstract Investments in new energy power plants are sought as a remedy for increased energy demands. At the same time, some of the increased energy demand is met by improving existing power plants. One of the ways to generate electricity in recent years is to produce electricity with natural gas. This process is done with gas turbines. Demands for gas turbine power generation systems are constantly increasing. Efficiency, reliability, environmental awareness and profitability are becoming increasingly important. It is necessary to work with higher pressures and temperatures to increase the efficiency of a gas turbine. Gas turbines now operate at about 1,500 degrees Celsius. In this study, energy and exergy analysis of a gas turbine in Turkey is done. The enthalpy, entropy, pressure and temperature values for each point are presented in tabular form from thermodynamic tables. Based on the thermodynamic laws for the system, the mass, energy and the equilibrium are established and the energy and exergy efficiencies are calculated. Places where high energy losses and high excursion losses have been identified and recommendations for improvements have been made. The 520 MW power turbine is used in a 257 MW compressor and the gas turbine has a net power output of 262 MW. Energy and exergy according to chemical composition of natural gas used as fuel, yield changes according to ambient temperature at compressor inlet and compressor inlet, efficiency changes according to turbine efficiency and turbine inlet temperature were examined separately. The results seem to be in parallel with the studies in the end result literature. Key words: Gas Turbine, Energy, Exgery, Thermodynamics.
502
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Bir Trijenerasyon Sistemin Enerji Analizi Emirhan TANRIÖVER1, Mehmet ALTINKAYNAK2,* Arzu ŞENCAN ŞAHİN3, A. Kemal YAKUT 4 Süleyman Demirel Üniversitesi, Isparta, Türkiye Süleyman Demirel Üniversitesi, Isparta, Türkiye 3 Süleyman Demirel Üniversitesi, Isparta, Türkiye 4 Süleyman Demirel Üniversitesi, Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected] 1 2
Özet Tüm dünyada artan nüfus ve buna paralel olarak artan enerji ihtiyacını karşılamak için çok daha fazla üretime ihtiyaç duyulmaktadır. Bu nedenle eldeki kaynakların en verimli şekilde kullanılması gerekmektedir. Bu doğrultuda elektrik üretimi yapmak isteyen endüstriyel oluşumlar için en cazip ve ekonomik enerji tasarrufu; birleşik ısıl – güç – soğutma sistemiyle yani trijenerasyon sistemleri ile mümkün olabilmektedir. Kojenerasyon ve trijenerasyon sistemleri yakıtların en verimli şekilde kullanılan sistemlerin başında gelmektedir. Trijenerasyon sistemleri hem elektrik enerjisi üreten hem ısıtma hem de soğutma yapan sistemler olup, ayrı ayrı üreten sistemlere göre daha az yakıt tüketerek işletme maliyeti azaltılır. Yine trijenerasyon sistemlerinde kullanılan NH3-H2O ve LiBr-H2O gibi soğutucu akışkan çiftleri sera etkisi oluşturmaz. Bu nedenle kullanılan soğutucu akışkan çiftleri çevre dostudur. Bu çalışmada doğalgaz yakıtı ile çalışan bir kojenerasyon sistemine absorbsiyonlu soğutma sistemi eklenip trijenerasyon sisteme entegre edilmiş ve enerji analizi yapılmıştır. 730 MW elektrik enerjisi üreten kojenerasyon sistemi 100 KW soğutma yüküne sahip absorbsiyonlu soğutma sistemi ile entegre edilip trijenerasyon sistemine dönüştürülmüştür. Her bir nokta için entalpi, entropi, basınç ve sıcaklık değerleri termodinamik tablolarından bulunarak tablolar halinde sunulmuştur. Ayrıca her bir ünite için enerji verimleri hesaplanmıştır. Sisteminin enerji analizi sonucunda brayton veriminin 18%, rankine veriminin 50%, soğutma sisteminin veriminin 46%, kojenerasyon sistemin veriminin 55% ve trijenerasyon veriminin 68% olduğu görünmüştür. Ayrıca absorbsiyonlu soğutma sisteminin COP değeri 0,78 olarak bulunmuştur ve literatürdeki çalışmalarla paralellik gösterdiği görünmüştür. Anahtar kelimeler: Trijenerasyon sistemleri, Absorbsiyonlu soğutma, Termodinamik Analiz.
503
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Energy Analysıs Of A Trıgeneration System Emirhan TANRIÖVER1, Mehmet ALTINKAYNAK2,* Arzu ŞENCAN ŞAHİN3, A. Kemal YAKUT 4 Süleyman Demirel University, Isparta, Turkey Süleyman Demirel University, Isparta, Turkey 3 Süleyman Demirel University, Isparta, Turkey 4 Süleyman Demirel University, Isparta, Turkey *Responsible author e-mail:
[email protected] 1 2
Abstract Much more production is needed all over the world to meet the growing population and parallel to the increasing energy need. So, resources should be use more efficiently. The most attractive and economical energy saving for the industrial formations that want to produce electricity in this direction; combined heat - power cooling system(CCHP), that is, with the tri - generation systems. Cogeneration and trigeneration systems are one of the most efficient fuels systems which uses of resources. Trigeneration systems are both produce electricity and cooling and heating systems which are less fuel consumption then seperated systems. Also, used in trigeneration systems, such as NH3-H2O and LiBr-H2O which constitute the refrigerant pairs, doesn’t couse green house effect. Therefore, pairs of refrigerant is environmentally. In this study, an absorption cooling system was added to a cogeneration system operating with natural gas fuel, and the energy was analyzed and integrated into the trigeneration system. In this study, an absorption cooling system was added to a cogeneration system operating with natural gas fuel, and the energy was analyzed and integrated into the trigeneration system. The cogeneration system, which produces 730 MW of electricity, is integrated with the absorbing cooling system with a cooling load of 100 KW and converted into a tri-generation system. For each point, enthalpy, entropy, pressure and temperature values are obtained from attached tables of this study and presented with tables. In addition, energy efficiency is calculated for each unit. The energy analysis of the system showed that the brayton yield was 18%, the rankine yield was 50%, the cooling system yield was 46%, the cogeneration system efficiency was 55% and the trigeneration efficiency was 68%. In addition, the COP value of the absorptive refrigeration system is found to be 0.78 and appears to be in parallel with the studies in the literature. Key words: Trigeneration systems, absorption cooling,, thermodynamic analysis.
504
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Çinli Postacı Algoritması ile Şehir Tanıma Tur Otobüsleri İçin Optimum Rota Tespiti: Bursa Örneği Mehmet Aykut GÜLÇELİK1,*, Figen BALO2 Hava Kuvvetleri Komutanlığı, Diyarbakır, TÜRKİYE Fırat Üniversitesi, Endüstri Mühendisliği Bölümü, Elazığ, TÜRKİYE *Sorumlu yazar e-posta:
[email protected] 1
2
Özet Araç Rotalama Problemleri (Vehicle Routing Problem) bir veya birkaç aracın, bir veya birden fazla noktaya planlanarak optimum rotalanmasını tasarlayan problemlerdir. Araç rotalama problemlerinde amaç, araçların kat ettiği toplam mesafenin en aza indirgenmesidir. Bu problemlerin çözümünde birçok algoritma kullanılabilir. Bu çalışmada, Bursa ilinin merkezinde bulunan tarihi ve turistik yerlerin optimal gezi rotası tespitinde Çinli Postacı Algoritması kullanılmıştır. Çinli Postacı Algoritması, kar temizleme araçlarından devriye araçlarına kadar birçok rotalama probleminde kullanılabilen bir algoritma olup rotalama problemlerinde en kısa yolun bulunabilmesinde başarılı sonuçlar verdiği için çalışmanın çözümlenmesinde tercih edilmiştir. Bu algoritma ile kavşak noktalardan birden fazla geçen şehir tanıma tur otobüsleri (City Sightseeing Bus) için, toplam kat edilen mesafe minimize edilerek; zaman, yol ve maliyet açısından etkin, turistik açıdan optimum rota belirlenmeye çalışılmıştır. Bu çalışma ile öncelikle Bursa il merkezinde bulunan gezilecek yerler belirlenip otobüsün gideceği yollar da hesaba katılarak her noktanın birbirine olan uzaklıkları belirlenmiştir. Daha sonra Bursa iline gelen turistlerin çevre tanıma turlarında en kısa zamanda ve en kısa yoldan şehri etkin bir şekilde gezebilmesi için Çinli Postacı Algoritması ile rotalama yapılmıştır. Sonuç olarak Bursa ilinde şehre gelen turistlerin en kısa zamanda en kısa yoldan şehri tanıyabileceği rotalama tespit edilmiştir. Bu çalışmayla gerek etkin zaman ve mesafe kullanımı gerekse kaliteli gezi planlaması açısından turizm sektörüne, şehir tanıma tur otobüsleri için sarf edilen enerji kaynaklarının daha etkin kullanılması açısından da ülke ekonomisine katkı sağlanması hedeflenmiştir. Anahtar kelimeler: Çinli postacı algoritması, Araç rotalama, Optimizasyon.
505
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Optimal Route Detection For City Recognition Tour Buses with Chinese Postman Algorithm Mehmet Aykut GÜLÇELİK1,*, Figen BALO2 Turkish Air Force,Diyarbakır, TURKEY Univercity of Fırat, Department of Industrial Engineering,Elazığ, TURKEY *Responsible author e-mail:
[email protected] 1
2
Abstract Vehicle Routing Problems(VRP) are problems that are designed to optimally route one or more vehicles to one or more points by planning. In Vehicle Routing Problems, the goal is to reduce the total distance traveled by vehicles. Many algorithms can be used to solve these problems. In this study, Chinese Postman Algorithm was used to determine the optimal travel route of historical and touristic places in the center of Bursa province. The Chinese Postman Algorithm is an algorithm that can be used in many vehicles routing problems from snow clearing vehicles to patrol vehicles and has been preferred in solving work because it provides successful results in finding the shortest path in routing problems. With this algorithm, for multiple passing the City Sightseeing Bus from intersection points, the total distance traveled is reduced; It has been tried to determine the optimum route in terms of time, distance and cost in terms of effective for tourists. With this study, firstly the places to visit in Bursa province center were determined and the ways to go to the bus were added to the account and the distance between each point was determined. Then, the Chinese Postman Algorithm was used to trace the tourists to the Bursa city in order to be able to navigate the environment recognition tours in the shortest time and on the shortest route efficiently. As a result, it has been determined that the tourists who come to the city in Bursa province can recognize the city from the shortest time in the shortest time. With this work, it is aimed to contribute to the tourism sector in terms of planning quality trips and the contribution to the economy of the country in terms of more efficient use of energy resources for city recognition tour buses. Key words: Chinese postman algorithm, Vehicle Routing, Optimization.
506
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Atık Alüminyum İçecek Kutularının Geri Dönüştürülmesiyle Üretilen Malzemenin Termal ve Mekanik Özelliklerinin İncelenmesi Mehmet DİRİLMİŞ1,*, Murat KISA2 Harran Üniversitesi, Şanlıurfa, Türkiye Harran Üniversitesi, Şanlıurfa, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2
Özet Bu çalışmada, alüminyum içecek kutularının geri dönüştürülmesi sürecindeki işlemlerin laboratuvar koşullarında test edilmesi, ikincil ham madde üretim aşamalarının gözlemlenmesi ve küçük çaplı bir geri dönüşüm sürecinden üretilen malzemenin mekanik ve ısıl özelliklerinin deneysel olarak belirlenmesi aşamaları amaçlanmıştır. Ayrıca, geri dönüşüm sürecinde malzeme mekanik ve ısıl özelliklerinde meydana gelen değişimlerin deneysel yolla tesbit edilmesi ile üretilen ikincil ürünlerin daha doğru mekanik ve ısıl özellikler ile tasarlanması sağlanmış olacaktır. Alüminyum içecek kutularını toplamak için belirlenen kantinlere içecek kutusu toplama kumbaraları yerleştirilmiştir. Toplanan atık kutular presleme işlemine tabi tutularak hacimleri azaltılmakta ve ergitme işleminin daha verimli olması sağlanmaktadır. Preslenen atıklar 800 derecelik fırında ergitilip hazırlanan kum kalıplara dökülerek yeni alüminyum levhalar üretilmiştir. Kıyaslama için 20 adet atık içecek kutusu kullanılarak hacim, kütle karşılaştırması yapılmıştır. Elde edilen yeni malzemeden alınan numuneler mekanik çekme deneyine tabi tutularak malzemenin çekme dayanımı, akma sınırı, kopma dayanımı ve elastisite modülü gibi mekanik özellikleri belirlenmiştir. Ayrıca, elde edilen malzeme numunelerinin ısı iletim katsayısı deneysel olarak belirlenmiştir. Anahtar kelimeler: Geri dönüşüm, atık alüminyum, içecek kutusu, ergitme, ikincil ürün.
507
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Analysis of the Thermal and Mechanical Properties of the Material Produced by Recycling of Waste Aluminum Beverage Boxes Mehmet DİRİLMİŞ1,*, Murat KISA2 Harran University, Şanlıurfa, Turkey Harran University, Şanlıurfa, Turkey *Responsible author e-mail:
[email protected] 1 2
Abstract In this study, it was aimed to test the process of recycling of aluminum beverage canisters in laboratory conditions, to observe the secondary raw material production stages and to experimentally determine the mechanical and thermal properties of the material produced from a small-scale recycling process. In addition, it will be possible to design secondary products produced with more accurate mechanical and thermal properties by experimentally determining the changes in material mechanical and thermal properties during the recycling process. The collecting boxes were placed in determined canteens to collect aluminum beverage cans. The collected waste is subjected to pressing process to reduce its volume and to make the melting process more efficient. The pressed wastes are melted in the furnace at 800 degree temperature and new aluminum plates are produced by casting method. For comparison, volume and mass comparisons were made for 20 waste bins. The samples taken from the new material were subjected to mechanical tensile test and mechanical properties such as tensile strength, yield strength, rupture strength and modulus of elasticity of the material were determined. In addition, the heat transfer coefficient of the material was determined experimentally. Key words: Recycle, waste aluminium, beverage box, melting, secondary product.
508
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Atık İçecek Kutularının Geri Dönüşümü için Pratik Kullanımlı Pnömatik Presleme Makinesi Tasarımı Mehmet DİRİLMİŞ1,*, Murat KISA2, Harun ÇİFCİ3, Yunus DEMİRTAŞ4 Harran Üniversitesi, Şanlıurfa, Türkiye Harran Üniversitesi, Şanlıurfa, Türkiye 3 Harran Üniversitesi, Şanlıurfa, Türkiye 1 2
Harran University, Şanlıurfa, Türkiye *Sorumlu yazar e-posta:
[email protected] 4
Özet Bu çalışmada, atık içecek kutularının depolama alanlarının ve nakliye masraflarının azaltılması için atık hacimlerini azaltan geri dönüşüme yardımcı pratik ve ekonomik bir presleme sisteminin tasarım, üretim ve montaj işlemleri açıklanmıştır. Üretilen taşınabilir presleme makinesi, atık toplama noktalarındaki kutuların preslenerek toplama aracına yüklenebilmesi için mobil bir basınçlı hava tankı veya kompresörden elde edilen basınçlı hava ile çalışmaktadır. Yaygın kullanılan alüminyum bir içecek kutusunun üzerinden ölçüler alınarak kutunun analizi için katı model dosyası oluşturulmuştur. Oluşturulan modelin analizleri yapılarak kutunun ezilmesi için gerekli kuvvet değeri bulunarak uygun pnömatik silindir seçimi yapılmıştır. Sistem 7 bar basınçlı hava ve bir adet 40x160mm pnömatik silindir ile yaklaşık yüzde seksen oranında hacimsel küçültme sağlamaktadır. Dikey düzlemdeki yükleme haznesine yerleştirilen atık kutular yatay düzlemdeki ezme haznesine kendi ağırlığıyla düşerek yerleşmekte ve burada pnömatik silindirdeki pistonun ileri hareketiyle ezilerek alt kısımdaki biriktirme odasında toplanmaktadır. Bu sistemde, tetikleme için bir adet 5/2 kollu manuel valf kullanılmakta ve dakikada 30 adet alüminyum içecek kutusu preslenerek biriktirme odasına aktarılmaktadır. Tasarım ve üretimi yapılan presleme makinesi, düşük maliyetli küçük bir silindir, valf, basınçlı hava tankı ve makine gövdesinden oluşmaktadır. Taşınabilir, basit, hızlı ve ekonomik olan makine tasarımının geri dönüşüm süreçlerinin daha geniş kitleye aktarılmasında yararlı olacağı ve farkındalığı arttırabileceği değerlendirilmektedir. Bu tarz ucuz ve pratik sistemlerin yaygınlaşmasının geri dönüşüm oranlarına olumlu yansıması beklenmektedir. Anahtar kelimeler: Atık, içecek kutusu, alüminyum, presleme, geri dönüşüm.
509
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Design of Practical Pneumatic Pressing Machine for Recycling of Waste Beverage Boxes Mehmet DİRİLMİŞ1,*, Murat KISA2, Harun ÇİFCİ3, Yunus DEMİRTAŞ4 Harran University, Şanlıurfa, Turkey Harran University, Şanlıurfa, Turkey 3 Harran University, Şanlıurfa, Turkey 4 Harran University, Şanlıurfa, Turkey 1 2
*Responsible author e-mail:
[email protected]
Abstract In this study, the design, production and assembly of a practical and economical pressing system to reduce waste volumes in order to reduce the storage areas of waste beverage boxes and transportation costs is explained. The produced portable press works with compressed air from a mobil compressed air tank or compressor so that the boxes at waste collection points can be pressed and loaded into the collection vehicle. A solid model file was created for the box analysis by taking measurements from a commonly used aluminum beverage box. Analyzes of the created model were carried out and the appropriate force value for crushing the box was found and the appropriate pneumatic cylinders were selected. The system provides a volumetric reduction of approximately 80 percent with 7 bar compressed air and a 40 x 160 mm pneumatic cylinder. The loading chamber is in the vertical plane, the waste beverage boxes are placed in their own weight in the crushing chamber in the horizontal plane. As the piston moves forward, the wastes are pressed in the crushing chamber and collected in the accumulation chamber. In this system, one 5/2 armed manual valve is used for triggering and 30 aluminum beverage boxes per minute are pressed and transferred to the accumulation chamber. The designing and manufacturing press machine consists of a low-cost small cylinder, valve, compressed air tank and machine body. It is evaluated that the machine design which is portable, simple, fast and economical will be beneficial in transferring recycling processes to a wider audience and may raise awareness. Expansion of such cheap and practical systems is expected to positively affect recycling rates. Key words: Waste, beverage box, aluminium, pressing, recycle.
510
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Yem Karma Makinası Şasisinin Bilgisayar Destekli Yapısal Analizi Deniz YILMAZ1,*, Mehmet Emin GÖKDUMAN1, Gülten TAŞKAYA1, Kemal ÇANKAYA1 Süleyman Demirel Üniversitesi. Ziraat Fakültesi. Tarım Makinaları ve Teknolojileri Mühendisliği Bölümü, Isparta, Türkiye
1
*Sorumlu yazar e-posta:
[email protected]
Özet Hayvancılık için büyük öneme sahip olan yem karma ve dağıtma süreci, günümüzde gücünü traktör kuyruk milinden veya elektrik motorundan alan sabit, asılır tip, çekilir tip ya da termik motorlu kendi yürür makineler ile gerçekleştirilmektedir. Yem karma makinalarında makinenin tüm parçaları şasi üzerinde toplanmakta ve bir arada tutulmaktadır. Şasinin yapısı üzerine gelen yükleri uygun şekilde dağıtabilecek özellikte olması gerekmektedir. Yem karma makinaları ağır yükler ile düzensiz, engebeli yol ve arazi şartlarında kullanıldığı için belirli bir işletme süresi sonunda yapısal problemler görülmektedir. Ortaya çıkan problemler genellikle makinanın kritik bölgelerinde meydana gelen gerilmeler ve bu gerilmelerin neden olabileceği hasarlardır. Şasi üzerinde ve bağlantılarında oluşan gerilme ve deformasyon değerlerinin araştırılması ve oluşan problemlerin tasarım aşamasında giderilmesi önemlidir. Bu nedenle imalat öncesi tasarım sürecinde parçanın çizimi yapılarak kontrollerinin ve çeşitli programlar ile gerekli analizlerin yapılması gerekmektedir. Bu çalışmada, bir firma tarafından üretimi gerçekleştirilmekte olan 10 m3 gövde hacmine sahip çekilir tip bir yem karma ve dağıtma makinasının şasisi incelenmiştir. Bilgisayar tabanlı bir tasarım programı aracılığıyla şasi ve şasi bağlantı elemanlarının işletme durumundaki maruz kaldığı statik ve dinamik yükler altında sonlu yapısal analize tabi tutularak gerilme analizleri gerçekleştirilmiştir. Analiz sonucunda, en yüksek gerilmenin oluştuğu ve deformasyonun meydana geldiği bölgeler belirlenmiştir. Şasi üzerinde sonlu elemanlar metoduna göre en fazla yorulmanın tekerlek bağlantı noktalarında olduğu belirlenmiştir. Anahtar kelimeler: Yapısal analiz, yem karma, sonlu elemanlar yöntemi.
511
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Computer Aided Structure Analysis of Mixer Feeders Chassis Deniz YILMAZ1,*, Mehmet Emin GÖKDUMAN1, Gülten TAŞKAYA1, Kemal ÇANKAYA1 Süleyman Demirel Univesity. Agricultural Faculty. Agricultural Machinery and Technologies Engineering Dep, Isparta, Turkey 1
*Responsible author e-mail:
[email protected]
Abstract The feed mix and distribution process, which has a major pre-requisite for livestock breeding, is carried out today with stationary, hanging type and towed type pto-driven machines or self-propelled machines with thermal motor. On feed mixer and distributing machines all parts of the machine are assembled on the chassis frame and held together. It is necessary to distribute loads on the chassis appropriately. Structural problems are observed at feed mixers after a certain period of operation due to the using in rugged road and terrain conditions with heavy loads. These problems are usually the stresses occurred in the critical part of the machine and the damage that these stresses can cause. It is important to determine the stress and deformation values occurred on the chassis and connections, and to eliminate these problems during the design process. For this reason, it is necessary to draw the parts of the machine in the pre- production period and to make necessary analyzes and controls with various programs. In this study, chassis of a towed type feed mixer and distributor with 10 m3 body volume has been analyzed. Structural and stress analysis of chassis and connections under static and dynamic loads according to the finite element method has been carried out during operation process with computer based design program. As a result of the analysis, the regions where the highest stress and deformation occurred has been determined. The highest fatigue region of chassis is determined as wheel connection points according to the finite element method. Key words: Structure analysis, feed mixer, finite element method.
512
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Harmanlama ve Ayırma Düzeni için PLC Tabanlı Kontrol Sistemi Tasarımı ve Geliştirilmesi Deniz YILMAZ1,*, Mehmet Emin GÖKDUMAN1 Süleyman Demirel Üniversitesi. Ziraat Fakültesi. Tarım Makinaları ve Teknolojileri Mühendisliği Bölümü, Isparta, Türkiye
1
*Sorumlu yazar e-posta:
[email protected]
Özet Türkiye’ de uygulanan hasat ve harman mekanizasyonuna yönelik üretim teknikleri gittikçe ağırlaşan pazar ve talep şartlarını karşılayabilmek için gelişmek durumundadır. İnsan iş gücünü azaltmak, üretimi hassaslaştırmak, hızlandırmak ve verimi arttırmak amacıyla programlanabilir mantıksal denetleyici (PLC) kontrol ve bilgisayar sistemleri kullanılmaya başlanmıştır. Bu çalışmada tıbbi aromatik bitkiler için tasarlanan harmanlama ve ayırma düzeni için PLC tabanlı bir kontrol sistemi tasarlanmış ve geliştirilmiştir. PLC tabanlı kontrol sistemi makinada yedirme, harmanlama ve ayırma düzenlerini ayrı ayrı kontrol edebilmektedir. Kontrol sistemi, hız kontrol cihazları ve PLC fonksiyonlu dijital ekran olmak üzere 2 temel kısımdan oluşmaktadır. Yedirme düzeninde bulunan ve götürücü banda hareket veren elektrik motoru, harmanlama düzeninde bulunan ve batörlerin millerine hareket veren elektrik motorları ve kontrol ayırma sisteminde bulunan vibro etkili elektrik motorları hız kontrol cihazları ile kontrol edilmektedir. PLC kontrollü dijital ekran, prototip makinanın çalıştırılıp kapatılması ve elektrik motorlarının hız kontrolleri ile yedirme miktarı, batör devri, elek hızı gibi değişkenlerin belirlenmesinde kullanılmaktadır. Bu çalışma TUBITAK-3501-Kariyer Geliştirme Programı “Bazı Tıbbi Aromatik Bitkilerin Harmanlama ve Ayırma Düzeni Parametrelerinin Belirlenmesi ve Prototipinin Geliştirilmesi” (111O179) projesinin bir kısmını içermektedir. Anahtar kelimeler: PLC, kontrol sistemi, hasat ve harman mekanizasyonu.
513
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Design and Development of PLC-Based Control System for Threshing and Separation Unit Deniz YILMAZ1,*, Mehmet Emin GÖKDUMAN1 Süleyman Demirel Univesity. Agricultural Faculty. Agricultural Machinery and Technologies Engineering Dep, Isparta, Turkey 1
*Responsible author e-mail:
[email protected]
Abstract Production techniques for the harvesting and threshing mechanization applied in Turkey need to be develop in order to meet the growing market and demand conditions. Programmable logic controller (PLC) control and computer systems have started to be used in order to reduce man power demand, increase the efficiency and for precise and fast production process. In this study a PLC based control system has been developed for the threshing and separation unit designed for medical and aromatic plants. The feeding, threshing and separating units can be controlled via PLC based control system, separately. The control system consists of two basic parts: speed control devices and digital display with PLC function. An electric motor in feeding unit running the conveyor, two electric motors operating the threshing cylinder and vibro-efficient electric motors in the separation system are controlled with speed control devices. PLC controlled digital display is used to determine the speed variables of the feeding conveyor, threshing cylinder, sieves and to turn the machine on and off. Key words: PLC, Control system, Threshing and separation mechanization.
514
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Yalvaç Bölgesinde Yapılan Betonarme Binalarda Yanlış Taşıyıcı Sistem Seçimi Nedeni İle Ortaya Çıkan Düzensizlikler ve Buna Bağlı Beton İsrafı Mehmet Kevser Derdiman1,* SDÜ Teknoloji Fakültesi, Isparta, TURKEY *Sorumlu yazar e-posta:
[email protected] 1
Özet Bilindiği gibi taşıyıcı sitem tercihi yapıların projelendirilmesi aşamasında yapılmakta ve bu aşamada yapılan yanlış kiriş, kolon ve perde yerleşimi yapılarda hem depreme dayanıksız yapı oluşumuna hem de daha fazla doğal kaynakların kullanımına neden olmaktadır. Bu çalışma kapsamında Yalvaç bölgesinde yapılan betonarme yapıların taşıyıcı sistemleri Deprem Yönetmeliği 2007’de ki “Bina taşıyıcı sistemlerine ilişkin genel ilkeler“ çerçevesinde incelenmiş ve buna bağilı olarak ortaya çıkan fazladan kullanılan beton miktarı yaklaşık olarak tespit edilmeye çalışılmıştır. Deprem Yönetmeliği 2007 genel ilkeler kapsamında, deprem yüklerini taşıyan bina taşıyıcı sisteminde ve aynı zamanda taşıyıcı sistemi oluşturan elemanların her birinde deprem yüklerinin temel zeminine kadar sürekli bir şekilde ve güvenli olarak aktarılmasını sağlayacak yeterlikte rijitlik, kararlılık ve dayanım bulunmasını, döşeme sistemlerinin, deprem kuvvetlerinin taşıyıcı sistem elemanları arasında güvenle aktarılmasını sağlayacak düzeyde rijitlik ve dayanıma sahip olmasını, binaya aktarılan deprem enerjisinin önemli bir bölümünün taşıyıcı sistemin sünek davranışı ile tüketilmesi için sünek tasarım ilkelerine titizlikle uyulmasını, düzensiz binaların tasarımından ve yapımından kaçınılmasını, A1 başlığı ile tanımlanan burulma düzensizliğine olabildiğince yer verilmemesini, bu bağlamda, perde vb rijit taşıyıcı sistem elemanlarının binanın burulma rijitliğini arttıracak biçimde yerleştirilmesine özen gösterilmesini, B1 ve B2 başlıkları ile tanımlanan ve herhangi bir katta zayıf kat veya yumuşak kat durumu oluşturan düzensizliklerden kaçınılmasını istemektedir. Deprem Yönetmeliğimizin genel ilkeler kapsamında belirttiği bu kurallara ne oranda uyulduğu gözlemlemek amacı ile Yalvaç bölgesinde devam etmekte olan 20 betonarme yapı rassal olarak seçilmiş ve bunların taşıyıcı sistemlerindeki kusurlar gözleme dayalı olarak tespit edilmeye çalışılmıştır. İncelenen yapıların çoğunluğu A1 burulma düzensizliğine neden olacak taşıyıcı sistem tercihi yapıldığı, neredeyse tamamınında perde yerleşiminin yanlış yer ve boyutlarda tercih edildiği, bir kısmında alt katları işyeri olarak planlamsı sonucu birinci katlarda yumuşak kat oluştuğu gözlemlenmiştir. Taşıyıcı sistemde yanlış noktalara yerleştirilen kolon ve perde kullanımının, birbirlerine yakın kolon kullanımının ve yanlış sistem tercihlerinin depreme dayanıksız yapı üretilmesine ve tahmini %7-8 civarı fazladan beton kullanımına neden olduğu gözlemlenmiştir. Ayrıca birleşim bölgelerinde iyi sıkıştırılmamış işlevini yerine getiremeyecek beton ve süneklik sağlamayacak nitelikte sargı donatısı uygulaması da gözlemlenmiştir. Doğal kaynakların ekonomik
515
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
kullanılması açısında deprem yönetmeliğindeki tavsiyelere uyarak aynı malzeme miktarı ile depreme daha dayanıklı binalar üretilmesi mümkündür. Anahtar kelimeler: Taşıyıcı sistem, Düzensizlikler,Deprem Yönetmeliği.
516
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Irregularities Due to Wrong Structural System Selection in Reinforced Concrete Buildings in Yalvac District and Concrete Waste Due to It Mehmet Kevser Derdiman1,* 1 SDÜ Teknoloji Fakültesi, Isparta, TURKEY *Responsible author e-mail:
[email protected]
Abstract As it is known, the selection of the building structural systems is made during the project planning phase and the false beams, column and shear walls placement made at this stage cause both the formation of the unresistant structure and the use of more natural resources. Within the scope of this study, the selections of reinforced concrete structural system in Yalvac region were investigated in the context of the "general guidelines for building structural systems" in the 2007 Turkish Earthquake Code and the amount of excess concrete used in relation to this was tried to be determined approximately. In accordance with the general principles of Turkish Earthquake Code, it is necessary that the building structural system resisting seismic loads as a whole as well as each structural element of the system shall be provided with sufficient stiffness, stability and strength to ensure an uninterrupted and safe transfer of seismic loads down to the foundation soil and floor systems possess sufficient stiffness and strength to ensure the safe transfer of lateral seismic loads between the elements of the structural system and In order to dissipate a significant part of the seismic energy fed into the building by ductile behavior of structural system, ductile design principles and design and construction of irregular buildings should be avoided and structural system should be arranged symmetrical or nearly symmetrical in plan and torsional irregularity defined as type A1 irregularity should preferably be avoided. In this respect, it is essential that stiff structural elements such as structural walls should be placed so as to increase the torsional stiffness of the building and vertical irregularities defined as types B1 and B2 leading to weak storey or soft storey at any storey should be avoided. In order to observe how these rules are followed, 20 reinforced reinforced concrete structures in Yalvac region were selected randomly and defects in their bearing systems were tried to be determined based on observation. It has been observed that the majority of the structures examined are the one that causes the torsion irregularity of A1, the shear walls placement is preferred in the wrong place and size, almost entirely, and the soft floor is formed in the first floors where the lower floors are planned as workplaces. It has been observed that the use of columns and shear walls placed in the wrong place in the structure, the use of columns close to each other and the wrong system preferences lead to the generation of the unstable structure and an estimated 78% excess concrete usage. In addition, uncompacted concrete and inadequate application of special seismic hoops and crossties were observed in the beam-column joints. It is possible to produce buildings that are more durable with the same amount of
517
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
material by following the recommendations in the earthquake regulation for the economic use of natural resources. Key words: Building structural systems, Irregularities, Earthquake Code.
518
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Anadolu’daki Ekolojik Restorasyon Çalışmalarında Tohum Kaynaklarının Önemi Mehmet KALKAN1,*, Mustafa YILMAZ2 1 2
BTU Orman Fakültesi, Orman Müh. Böl., Bursa, Türkiye BTU Orman Fakültesi, Orman Müh. Böl., Bursa, Türkiye *Sorumlu yazar e-posta:
[email protected]
Özet Anadolu yüzyıllardır insan yerleşimlerine ev sahipliği yapmaktadır. Geçen süreç içinde insanların etkisi ile doğal ekosistemlerde farklı boyutlarda bozulumlar ortaya çıkmıştır. Bu bozulumların bir kısmı söz konusu ekosistemlerin yıkımına kadar varmıştır. Diğer yandan son dönemlerde geniş alanlarda orman, mera, dağ ve su ekosistemi gibi farklı ekosistemleri onarmaya dönük ağaçlandırma, bitkilendirme ve ekolojik restorasyon çalışmaları yürütülmektedir. Az sayıda bulunan bitki türlerinin eski bolluk ve örtme oranına kavuşması ekolojik restorasyonun en temel amaçlarındandır. Yapılan çalışmalarda olabildiğince sahanın yüzyıllar öncesindeki bozulmamış duruma ulaştırılması hedeflenmelidir. Bunun için de alanda kullanılacak türler ve bu türlerin tohum kaynağı kritik öneme sahiptir. Öncelikle ekolojik restorasyon çalışmalarında sahada kullanılacak türleri tespit etmek üzere uygulama sahası çevresinde mevcut bitkiler belirlenmelidir. Kullanılacak bitkiler belirlendikten sonra, bu türlerin tohumlarına ihtiyaç bulunmaktadır. Tohumlar yöreye uyum sağlamış bitkilerden toplanmalıdır. Tohum kaynaklarının oldukça sınırlı olduğu durumlarda, elde edilen tohumlar gelecek yıllarda kullanılmak üzere depolanmalıdır. Uygun yerlerde tohumları saklamak üzere tohum bankaları tesis edilmelidir. Bitki ve tohum transferlerinin kolaylıkla gerçekleştiği son dönemlerde, yerel tür ve tohum kaynaklarının belirlenmesi ve değerlendirilmesi gen kaynaklarının korunması ve ekolojik uyum bakımından vaz geçilmez önceliklerdir. Ekolojik restorasyon yapılacak sahalarda yüzyıllardır bu alanlarda buluna doğal müşir bitki ve bozulmamış veya az zarar görmüş referans alanların tespiti ve korunması çalışmaların ilk adımını oluşturmaktadır. Anahtar kelimeler: Tohum, Ekolojik restorasyon, Ekosistem, Orman.
519
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Importance of Seed Sources in Ecological Restoration Studies in Anatolia Mehmet KALKAN1,*, Mustafa YILMAZ2 1
BTU Faculty of Forestry, Department of Forest Engineering, Bursa, Turkey 2 BTU Faculty of Forestry, Department of Forest Engineering, Bursa, Turkey *Responsible author e-mail:
[email protected]
Abstract Anatolia has been home to human settlements for centuries. In the meantime, the natural ecosystems have been degraded by human effects in different scales. Some of these degradations have been reached to destruction of such ecosystems. In recent decades, on the other hand, forestation, plantation, and ecological restoration studies have been carried out in large areas for the restoration of different ecosystems such as forest, pasture, mountain, and riparian ecosystems. One of the main objectives of ecological restoration is that the rare plant species reach to old state of abundance and cover rate. The lands should be leaded to the old unimpaired original state in restoration studies. For this reason, the plant species to be used in the field and the seed sources of these species have critical importance. The existing plant species should firstly be identified in the surrounding areas in order to determine species to be used in the ecological restoration works. After the determination of plants to be used, the seeds of these species are needed. The seeds should be collected from the adapted local plants as much as possible. Where the seed sources are limited, the collected seeds should be stored for the future use. The local seed banks should be established to store the seeds at appropriate conditions. In recent decades, where plants and seeds are easily transformed, determination and benefits of local plant species and seed sources are indispensable priorities in terms of conservation of plant genetic resources and ecological adaptation. The identification and the conservation of the native indicator plants and the intact or less damaged natural sites is the first step for the ecological restoration studies. Key words: Seed, Ecological restoration, Ecosystem, Forest.
520
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Muhasebe Mesleğinin Öğrenciler Tarafından Algılanması: Ayvacık Meslek Yüksekokulu Örneği Selçuk İPEK1, Mehmet ÖKSÜZ2,*, Mesut YÜCESAN2 Çanakkale Onsekiz Mart Üniversitesi, Biga İİBF, Çanakkale, Türkiye Çanakkale Onsekiz Mart Üniversitesi, Ayvacık MYO, Çanakkale, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2
Özet Kamu hizmetlerinin karşılanması amacıyla kişi ve kuruluşlardan kanunlara dayanılarak alınan vergiler, devletlerin gelir kaynakları içerisinde en büyük paya sahip olanıdır. Bu vergilerin sağlıklı bir şekilde tahsil edilebilmesi için de sağlıklı yürüyen bir muhasebe sistemi şarttır. Muhasebe işlemleri, nitelikli muhasebe elemanlarınca icra edildiğinde elde edilen bilgilerin güvenilirliği de artmaktadır. Bu sebepten günümüzde Türkiye’de en çok aranan nitelikli elemanlardan biri muhasebe elemanlarıdır. Muhasebe mesleğinin öneminin ve işlevinin artması, ara eleman yetiştiren meslek yüksekokullarını piyasanın bu ihtiyacına uygun nitelikli ara eleman yetiştirmeye sevk etmektedir. Bu çalışmada, Ayvacık Meslek Yüksekokulu öğrencilerinin muhasebe mesleği hakkındaki görüşlerinin ölçülmesi ve analiz edilmesi amaçlanmıştır. Bu amaç doğrultusunda veri toplayabilmek için Ayvacık Meslek Yüksekokulu İşletme Yönetimi, Bankacılık ve Sigortacılık ile Turizm ve Otel İşletmeciliği programında öğrenim gören öğrenciler üzerinde anket tekniği kullanılmıştır. Uygulanan anket beşli likert ölçeği ve kapalı uçlu sorulardan oluşmaktadır ve elde edilen veriler IBM SPSS Statistics 21 programında test edilerek anlamlandırılmıştır. Anahtar kelimeler: Muhasebe Mesleği, Muhasebe, Meslek Yüksekokulu.
521
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Perception of Accounting Profession by Students: An Example of Ayvacık Vocational School Selçuk İPEK1, Mehmet ÖKSÜZ2,*, Mesut YÜCESAN2 Çanakkale Onsekiz Mart University, Biga İİBF, Çanakkale, Türkiye Çanakkale Onsekiz Mart University, Ayvacık MYO, Çanakkale, Türkiye *Responsible author e-mail:
[email protected] 1
2
Abstract Taxes on the basis of laws from individuals and organizations in order to meet public services have the biggest share of the income resources of the states. In order for these taxes to be collected in a healthy way, a well-run accounting system is a must. Accounting transactions, when performed by qualified accounting staff, also increase the reliability of the obtained data. For this reason, nowadays, qualified accounting personnel are one of the most wanted staff in Turkey. The increase on the importance and function of the accounting profession has led to train qualified intermediate staff members in vocational schools educating intermediate staff who fit for this market demand. In this study, it is aimed to measure and analyze Ayvacık Vocational School students' views about the accounting profession. In order to collect data regarding this aim, questionnaire technique was used on students studying at Ayvacık Vocational School Business Management, Banking and Insurance and Tourism and Hotel Management Programs. The questionnaire is consisted of five-point likert scale and closed-ended questions, and the obtained data were tested via the IBM SPSS Statistics 21 program. Key words: Accounting Profession, Accounting, Vocational College.
522
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Türkiye’nin Farklı Bölgelerinden Toplanan Bazı Arpa (Hordeum vulgare L.) Köy Popülasyonlarının Agromorfolojik Karakterizasyonu Mehmet TEKİN1, Ahmet ÇAT2, Mürsel ÇATAL2, Taner AKAR1,* Akdeniz Üniversitesi Ziraat Fakültesi Tarla Bitkileri Bölümü, Antalya Akdeniz Üniversitesi Ziraat Fakültesi Bitki Koruma Bölümü, Antalya *Sorumlu yazar e-posta:
[email protected]
1
2
Özet Köy popülasyonları ya da bir başka deyişle yerel çeşitler, bitki genetik kaynakları olarak önemli bir yere sahiptir. Günümüzde modern çeşitler arasındaki genetik varyasyonun daralmasından dolayı ıslah çalışmalarında yüksek derecede varyasyona sahip ve özellikle kalite ve hastalıklara dayanıklılık kaynağı olarak ön plana çıkan köy popülasyonlarına sıkça başvurulmaktadır. Bu materyallerin ıslah çalışmalarında kullanılması için morfolojik, tarımsal ve fenolojik yönden karakterize edilmesi gerekmektedir. Bu çalışma ile Türkiye’nin farklı bölgelerinden toplanan toplam 110 adet arpa (Hordeum vulgare L.) köy popülasyonlarının agromorfolojk özellikleri ortaya konmuştur. Bu amaçla, 110 popülasyon 2016-2017 üretim sezonunda Akdeniz Üniversitesi Ziraat Fakültesi araştırma arazisinde 1 m 2 sıra olarak yetiştirilmiştir. Çalışma kapsamında her popülasyona ait tesadüfen seçilen 10 bitkinin bitki boyu (cm), başak boyu (cm), kılçık uzunluğu (cm), bayrak yaprağı uzunluğu ve genişliği (cm), kılçık dişliliği, kılçık ucu antosiyaninliği, kılçık rengi, başak sıra sayısı, kavuz rengi, dane rengi, tek başak verimi (g) ve bin dane ağırlığı (g) morfolojik ve tarımsal özellikleri kaydedilmiştir. Elde edilen verilere ait ortalama, ortalamanın standart hatası ve varyasyon katsayısı gibi tanımlayıcı istatistikler hesaplanmıştır. Tek başak verimi, kılçık rengi, kavuz rengi, kılçık dişliliği, kılçık ucu antosiyaninliği özellikleri bakımından popülasyonlar arasında önemli bir farklılık bulunmazken, özellikle bitki boyu, başak boyu, bayrak yaprağı uzunluğu ve genişliği gibi özellikler en yüksek varyasyon katsayısına sahip özellikler olarak tespit edilmiştir. Bu çalışmaya ek olarak, popülasyonların moleküler karakterizasyon çalışmaları devam etmektedir. Elde edilen sonuçların ülkemizde yürütülecek arpa ıslah programlarında faydalı olabileceği düşünülmektedir. Anahtar kelimeler: Hordeum vulgare L., karakterizasyon, morfolojik, tarımsal, köy popülasyonu.
523
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Agromorphological Characterization of Some Barley (Hordeum vulgare L.) Landraces Collected from Different Provinces of Turkey Mehmet TEKİN1, Ahmet ÇAT2, Mürsel ÇATAL2, Taner AKAR1,* 1
2
Akdeniz University Faculty of Agriculture Department of Field Crops, Antalya Akdeniz University Faculty of Agriculture Department of Plant Protection, Antalya *Responsible author e-mail:
[email protected]
Abstract Landraces or local population have an important place in agricultural activity. These population, which have high variability and some traits such as quality and resistance genes against to diseases, are used frequently in breeding studies nowadays due to narrow variability among modern varieties. These materials should be characterized morphologically, agronomically and phenologically to use in breeding studies. This study aimed to characterize 110 barley (Hordeum vulgare L.) population collected from different provinces of Turkey agromorphogically. For this purpose, these population were grown in experimental area of Faculty of Agriculture in Akdeniz University during 2016-2017 growing season. Some agronomical and morphological traits such as plant height (cm), spike lenght (cm), awn lenght (cm), flag leaf lenght (cm), flag leaf width (cm), awn dentiness, anthocyanin in awn end, awn color, number of rows of spikelets, hull color, grain color, single spike weight (g) and 1000 seed weight (g) were recorded with this study. Basic statistical parameters such as mean, standard error of mean and coefficient of variation were calculated. While there was low variation for single spike weight, awn color, hull color, awn dentiness, anthocyanin in awn end among the population, some traits such as plant height, spike lenght, flag leaf lenght, flag leaf width show high variation. In addition to this study, these population will be characterized molecularly. To sum up, it is considered that obtained data can be helpful for barley breeding programmes. Key words: Hordeum vulgare L., characterization, morhological, agronomical, local population.
524
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Türkiye’deki Fasulye Çeşitlerinin Antraknoz Hastalığına Karşı Dayanıklılığının Farklı Moleküler Markörler Kullanılarak Karakterizasyonu Mehmet Zahit YEKEN1, Göksel ÖZER2,*, Harun BAYRAKTAR3, Vahdettin ÇİFTÇİ1 Abant İzzet Baysal Üniversitesi, Ziraat ve Doğa Bilimleri Fakültesi, Tarla Bitkileri Bölümü, Bolu, Türkiye 2 Abant İzzet Baysal Üniversitesi, Ziraat ve Doğa Bilimleri Fakültesi, Bitki Koruma Bölümü, Bolu, Türkiye 3 Ankara Üniversitesi, Ziraat Fakültesi, Bitki Koruma Bölümü, Ankara, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
Özet Colletotrichum lindemuthianum (Sacc.&Magnus) Lams. Scrib’ un neden olduğu antraknoz hastalığı dünyada ve ülkemizde fasulye üretimini sınırlandıran en önemli etmenlerden birisidir. Uygun koşullar oluştuğundu hastalıktan dolayı ürün kayıpları %100’lere varabilmektedir. Hastalığına karşı en etkili mücadele yöntemlerinden birisi de dayanıklı çeşit kullanımı/ıslahıdır. Son zamanlarda gerçekleştirilmiş olan ıslah programlarında bitkiye ait birçok morfolojik ve biyolojik özellikler genetik düzeyde açıklığa kavuşturulmuştur. Günümüz modern ıslah çalışmalarının temeli, elde edilen bu bilgiler üzerine dayandırılmaktadır. Birçok hastalığa karşı poligenik ve monogenik birçok dayanıklılık lokusu tanımlanmıştır. Bununla birlikte farklı fasulye genotiplerinde antraknoz hastalığına karşı dayanıklılık sağlayan en az 12 dayanıklılık lokusu belirlenmiş ve bu genler “Co” sembolü ile adlandırılmaktadır. Bu dayanıklılık genlerini taramak için farklı markör sistemleri geliştirilmiştir. Bu çalışmada da, Türkiye’deki tescillenmiş ticari fasulye çeşitlerinde bu dayanıklılık lokuslarının varlığını araştırmak amacıyla, 43 fasulye çeşidinde Co-3, Co-4, Co-42, Co-6, Co-10, Co-1, Co-11, Co-13 ve Co-14 gibi dominant “Co” dayanıklılık genleri sırasıyla SB12/350 bp, SC08/910 bp, SBB14/1150 bp, SZ04/567 bp, SF10/1072 bp, OPF10 530 bp, OPAZ04/565 bp, OPV20/680 bp ve TGA1/570 bp moleküler markörleri ile taranmıştır. Araştırma sonucunda Türkiye’deki fasulye çeşitlerinde tüm dayanıklılık genlerinin mevcut olduğu belirlenmiştir. Sonuç olarak, bu çeşitler gelecekteki ıslah programlarında dayanıklı fasulye çeşitlerinin geliştirilmesinde dayanıklılık kaynağı olarak kullanılabilme potansiyeline sahiptir. Ayrıca bu markörlerin fasulye genotiplerinin dayanıklılık lokuslarının taranmasında başarılı bir şekilde de kullanılabileceği anlaşılmıştır. Anahtar kelimeler: Colletotrichum lindemuthianum, fasulye, dayanıklılık genleri, markör destekli seleksiyon.
525
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Characterization of Turkish Common Bean (Phaseolus vulgaris L.) Cultivars for Resistance to Anthracnose Disease by Using Different Molecular Markers Mehmet Zahit YEKEN1, Göksel ÖZER2,*, Harun BAYRAKTAR3, Vahdettin ÇİFTÇİ1 1
Abant Izzet Baysal University, Faculty of Agriculture and Natural Science, Department of Field Crops, Bolu, Turkey 2 Abant Izzet Baysal University, Faculty of Agriculture and Natural Science, Department of Plant Protection, Bolu, Turkey 3 Ankara University, Faculty of Agriculture, Department of Plant Protection, Ankara, Turkey *Responsible author e-mail:
[email protected]
Abstract Anthracnose caused by Colletotrichum lindemuthianum (Sacc.&Magnus) Lams. Scrib is one of the most important diseases of common bean (Phaseolus vulgaris L.) in Turkey and worldwide. It can cause yield losses of up to 100% if climatic conditions favor the pathogen. It is known that the most effective way for resistance to the disease is use of resistant cultivars. In recent years, many morphological and biological traits have been deeply studied at the genetic level in breeding programs. Today, the basis of modern breeding studies is based on the information obtained from these characterization studies. Many poligenic and monogenic resistance loci have been described against many diseases. Besides that at least 12 resistance genes called as “Co” against to the pathogen have been characterized in different common bean genotypes until now. Different marker systems have been developed to screen these resistance genes. In this study, some molecular markers such as SB12/350 bp, SC08/910 bp, SBB14/1150 bp, SZ04/567 bp, SF10/1072 bp, OPF10/530 bp, OPAZ04/565 bp, OPV20/680 bp and TGA1/570 bp were used to determine the dominant Co resistance genes such as Co-3, Co-4, Co-42, Co-6, Co-10, Co-1, Co-11, Co-13, and Co-14 in 43 Turkish registered common bean cultivars. The results show that the cultivars have all resistance loci so each genotype has at least one of the resistance genes. As a consequence, the cultivars can be used as resistance sources in further breeding programs to develop resistant common bean cultivars. In addition, these markers can be used successfully for screening to resistance genes in common bean genotypes. Key words: Colletotrichum lindemuthianum, common bean, resistance genes, marker-assisted selection.
526
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Turkish Kitchen Culture From Our Local Tastes Batirik Mehtap BAYKAL1,*, Mehmet ÇELİK 2, Hülya SAYĞI1, Ayhan SAYGI1 Çukurova University, Yumurtalık Vocational School Çukurova University, Faculty of Fisheries, Aquaculture Processing Technology * Responsible author e-mail:
[email protected] 1
2
Abstract Today, the new insights that have emerged with the development of the tourism sector have contributed to the development of gastronomy tourism by directing the sight of tourists to different destinations. The desire to discover untried tastes of cultural and intellectual possibilities at the national and regional scale has been encouraged to prefer this type of tourism. Turkish culinary culture is rich enough to contribute to the development of gastronomic tourism with the important tastes it has. This study examines the features of Batırık, its content, structure, regional differences, nutritional values and gastronomic tourism, which belong to Mersin region. Batırık is usually a meal served at the time of mass visitor arrivals, and a place that meets the needs of the guests at home. The presentation of batırık is done in two different ways, preferably by cold soup and meatballs. Fine bulgur (smaller granules of burghul), which is the main ingredient of the batırık, is kneaded with tomato or tomato paste without getting wet. The mixture of peanuts and sesame seeds is called "interior" and all the ingredients of the batırık are called "batırık gayıtı". The immorality first appeared in Ermenek and then came to Mersin. It is pronounced as "Batırma" in Ermenek, walnut is used as "interior". Mersin and its districts are Gülnar, Silifke, Anamur and Erdemli, also peanut and sesame seeds. In the center of Mersin, only tahini is roasted and used as "interior". The locality of the "interior" change from place to place. It is known that the seeds of peanut-sesame seeds called "kendirik" were roasted and pounded. In addition to some differences in immersion varieties, it is also called "Batırık with meat", which has been taken two or three times and differently without lean. Besides, there is also a kind of batırık as plenty of tomatoes without using "inside" and is called "widow batırık". Batırık, nutritional value is a very high food. Approximately one portion contains 15.90 g protein, 71.49 g carbohydrate and 39.27 g. there is oil. It is rich in zinc, thiamine, riboflavin, calcium, niacin, iron, vitamin A, vitamin C and phosphorus. The use of local foods in tourism today is aimed at securing a universal identity by preserving the local cultural heritage that countries have. The Turkish cuisine, which has an important place in the world cuisines, has different flavors from every region of Anatolia. In this study, it is aimed to emphasize the content and characteristics of the batırık from our local riches and to ensure the continuity of it within the scope of gastronomic tourism. Key words: Batırık, peanut, sesame, regional flavors.
527
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Our Cultural Heritage: Turkish Coffee Mehtap BAYKAL1,*, Mehmet ÇELİK 2, Hülya SAYĞI1, Ayhan SAYGI1 Çukurova University, Yumurtalık Vocational School Çukurova University, Faculty of Fisheries, Aquaculture Processing Technology * Responsible author e-mail:
[email protected] 1
2
Abstract Turkish coffee, which has an important place among the rich cultural values that Turkey possesses, is an important value that reflects our culture with its prepared, cooked, presented, used tools and utensils. The history of the Turkish coffee, began with the introduction of Turkish culinary artifacts in the 1500s during the reigon of Sultan Süleyman the Magnificent and in 2013 it was taken on UNESCO's list of intangible cultural heritage and today it has taken its place as a cultural heritage that preserves its value. Our culture has also enabled the formation of coffeehouse cultures, which are instrumental in the socialization of Turkish coffee people who have always taken their place. Turkish coffee; has become an important symbol that influences the reflection of Turkish hospitality in bringing people together for forty years remembering that in social practices that are taking place nowadays it is a means to reconciliation in rituals such as asking for girls. It includes many stages, including the preparation, presentation, drinking and afterdrinking of Turkish coffee. After grinding the coffee beans, the coffee is roasted with a glass of water and two double roasted delights. It is aimed to clean the mouth with a sip of water before the blush and to make the coffee taste feel better in the palate. After the coffee drink, the presentation will be completed with fortune. This important tradition, as a whole, will promote our culture and protect the place it deserves in culinary culture with attentive presentations. With this study, it was aimed to put forward the importance of transferring to the next generations as our cultural cultural heritage of Turkish culture which has reached the daily from the past and can still keep its update. Key words: Turkish coffee, cultural heritage, traditions and customs.
528
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Reactions of Safflower (Carthamus tinctorius L.) Cultivars to Salt Doses During Their Germination and Seedling Growth Mehtap Gürsoy1,*, Nuran Erdem1 Aksaray University, Güzelyurt Vocational School, Güzelyurt, Aksaray, TURKEY *Responsible author e-mail:
[email protected]
1
Abstract Information about germination and seedling growth periods is very important forimproving yield in plant. Therefore, determination of optimum factors affecting germination and sproutıng of seeds is of high importance. Safflower plants are either unable to grow or have difficulty to grow under abiotic stress due to salinity. The present study, intended to screen safflower cv. Linaz, Ayaz and Dinçer against 0, 1.5, 3, 4.5, 6 dS/m NACl salt stress on germination and seedling growth of safflower cultivars in 2016. The germination percentage (%) was measured on the 4th day, while the root size (cm), seedling height (cm) and seedling fresh weight (mg) were noted afterthe 14th day of treatment. Moreover, the seedlings were desiccated in a 70°C drying oven for 48 hours to determine dry weight (mg). It was established that all parameters of the plant cultivars under observation through increasing salt concentrationsration that decreased in comparison to the control group. The germination percentage value decreased in all cultivars in proportion with the increasing salt doses. Compared to the control group, the highest and the minimum reduction was observed in the cv. Dinçer and cv Ayaz respectively. In terms of root size, cv. Linaz was the least affected from the salt doses. Based on our observations, cv. Ayaz was considered as the most salt resistant safflower cultivar in terms of seedling height, seedling fresh weight and seedling dry weight. Key words: Safflower, Carthamus tinctorius L., NaCl doses, germination, seedling growth.
529
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Çimlenme ve Fide Gelişimi Sırasında (Carthamus tinctorius L.) Aspir Çiçek Çeşitlerinin Tuz Dozlarına Tepkimeleri Mehtap Gürsoy1,*, Nuran Erdem1 1Aksaray University, Güzelyurt Vocational School, Güzelyurt, Aksaray, TURKEY *Responsible author e-mail:
[email protected]
Özet Bitki yetiştirmede çimlenme ve fide gelişimi dönemleri verim üzerinde çok önemlidir. İyi bir çimlenme ve çıkış için optimum koşullar önem taşımaktadır. Stres koşullarında bitkiler gelişememektedirler. Tuzlu koşullar da bitkiler için stress faktörlerinden birisidir. Aspir yağlı tohumlu bitkiler arasında çok önemli yere sahip bir bitkidir. Farklı tuz dozlarının aspir bitkisinin çimlenme ve fide gelişimine etkisini incelemek amacıyla yapılan bu araştırma, 2016 yılında Linaz, Ayaz ve Dinçer aspir çeşitleri kullanılarak yürütülmüştür. NaCl olarak ise 0, 1.5, 3, 4.5, 6 dS/m konsantrasyonları kullanılmıştır. Tohum ekiminden sonra 4.günde çimlenme yüzdesi (%), 14. günde de, kök uzunluğu (cm), fide uzunluğu (cm), fide yaş ağırlığı (mg) değerleri saptanmıştır. Ayrıca, yaş fideler 70 °C’lik etüvde 48 saat kurutulduktan sonar tartılarak kuru ağırlık (mg) belirlenmiştir. Araştırma sonucunda tüm çeşitlerde kontrole göre artan tuz konsantrasyonları ile incelenen tüm özelliklerde azalmalar gözlemlenmiştir. Çimlenme yüzdesi bakımından bütün çeşitlerde kontrole göre artan tuz dozları ile azalmalar olmakla beraber, en fazla azalma Dinçer çeşidinde gözlemlenmiştir. Fide uzunluğu bakımından tuz dozlarından en az etkilenen çeşit Ayaz olmuştur. Kök uzunluğu bakımından tuz dozlarından en az etkilenen Linaz çeşidi olmuştur. Genel olarak incelediğimiz özelliklerden fide uzunluğu, fide yaş ağırlığı ve fide kuru ağırlığı bakımından Ayaz çeşidinin tuza dayanımının daha fazla olduğu gözlemlenmiştir. Anahtar kelimeler: Aspir, Carthamus tinctorius L., tuz dozları, çimlenme, fide gelişimi.
530
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Çevre Dostu Binalar ve Yeşil Bina Sertifika Sistemleri Melike DOĞAN1,*, Destan SEÇME1, Murat AKTEN1 Süleyman Demirel Üniversitesi Mimarlık Fakültesi, Peyzaj Mimarlığı Bölümü, Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected]
1
Özet Birçok gelişmiş ülkedeki binalar, ülkelerinin enerji kaynaklarının önemli bir bölümünü tüketmektedir. Perez-Lombard ve ark. (2008), gerek hem ticari hem de konut binaları dünyanın enerji tüketiminin %20 ila %40'ından sorumludur ve bu değerler her yıl istikrarlı bir şekilde artmaktadır. Binalar sadece büyük miktarda enerji harcamakla kalmayıp, çevre için zararlı olabilecek ve dünyanın iklim değişikliğinde büyük bir rol oynayabilecek önemli karbondioksit emisyonlarının ardındaki suçluları da olmaktadır. Ayrıca, bina inşası, toksik materyallerin ve diğer birçok zararlı süreçlerin kullanımından kaynaklanan atmosferik ve su kirliliği gibi birçok çevre sorununu da beraberinde getirir. Açıkçası, yapı inşaat endüstrisi sonuçta önemli bir çevre yükü olabilir. Buna bağlı olarak, küresel ısınma, susuzluk, çevre kirliliği ve doğal kaynakların hızla tüketilmesi yapı sektöründe çevre dostu, ekolojik binaların yapılmasını gündeme getirmiştir. Çevre dostu bina yapımına ilgi giderek artarken yeşil bina olarak tabir edilen yapılar ortaya çıkmıştır. Yeşil binalar, binaların çevre ve insan sağlığı üzerindeki etkilerini göz önünde bulunduran ileri teknoloji gayrimenkullerdir. Günümüzde sürdürülebilir, ekolojik ve çevre dostu binalar denilince karşımıza yeşil binalar çıkmaktadır. Yeşil binalar, yapının arazi seçimiyle başlayan, yaşam döngüsü çerçevesinde değerlendirilen, bütüncül bir anlayışla, sosyal ve çevresel sorumluluk bilinciyle tasarlanan, iklim özelliklerine ve arazi koşullarına uygun, ihtiyaç kadar tüketen, yenilenebilir enerji kaynaklarına yönelmiş, doğal malzemelerin kullanıldığı, ekosistemlere duyarlı ve sürdürülebilir yapılar olarak tanımlanmaktadır. Yeşil binaların sayılarının giderek artması ile birlikte standartlaşma ve sertifikalandırma çalışmaları başlamıştır. Sertifika sistemleri, genel ve geçerli ölçme standartları oluşturarak yeşil binayı tanımlamak, yeşil binanın yararları konusunda tüketici bilincini artırmak ve binalarda bir dönüşüm gerçekleştirmeyi amaçlamaktadır. Anahtar kelimeler: Sürdürülebilirlik, Yeşil Bina, Yeşil Bina Sertifika Sistemleri.
531
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Eco-Friendly Buildings and Green Building Certificate Systems Melike DOĞAN1,*, Destan SEÇME1, Murat AKTEN1 1
Süleyman Demirel University Architecture Faculty, Departments of Landscape Architecture, Isparta, Turkey *Responsible author e-mail:
[email protected]
Abstract Buildings in many developed countries are consuming significant portions of their nations' energy resources. According to Perez-Lombard et al. (2008), both commercial and residential buildings together are responsible for between 20 and 40% of the world's energy consumption and these values are rising steadily every year. Not only are buildings expending large amounts of energy, they are also the culprits behind substantial carbon dioxide emissions, which can be detrimental to the environment and play a huge role in the world's climate change. Also, building construction generates many other environmental issues such as atmospheric and water pollution, which arise from the use of toxic materials and many other harmful processes involved. Evidently, the building construction industry may be a consequential environmental burden. Consequently global warming, shortage of water, environmental pollution and fast expenditure of natural sources have come to order the environment-friendly ecologic buildings in building sector. The interest in environment-friendly building construction has been increased and the constructions called as green building have emerged. Green buildings are hi-tech real estates which take into account the effects of buildings on environment and human health. Green buildings refer to sustainable, ecological and environment-friendly structures. Green buildings are sensitive to ecosystem and sustainable design. Green buildings include the design process and the building life cycle. The process start with proper site selection and continues with the construction. Green building are designed with a holistic understanding of social and environmental responsibility. Standardization and certification has been initiated along with the increasing number of green buildings. In this study, certification systems aim to define the green building, promote the green competition, raise consumer awareness about the benefits of green building and achieve a renewal in the building concept by creating general and the current measuring standards. Key words: Sustainability, Green Building, Green Building Certificate Systems.
532
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürdürülebilir Kalkınma Çerçevesinde Çevre Ekonomisi ve Çevre Etiği İlişkisi Melike DOĞAN1,*, Destan SEÇME1, Murat AKTEN1 Süleyman Demirel Üniversitesi Mimarlık Fakültesi, Peyzaj Mimarlığı Bölümü, Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected]
1
Özet Çevre ekonomisinin dışsal maliyetleri oldukça yüksektir. Özellikle sanayileşme ve teknolojik gelişmeler ile birlikte üretimin ve tüketimin hızla artması sonucu; hava, su ve toprak hızla kirlenmeye, doğal kaynaklar tükenmeye başlamış, doğanın kendi kendini yenileme niteliği zarar görmüştür. Gelişmekte olan ülkelerin temel hedefi kalkınmadır ancak çevre politikaları uygulayarak bu hedefi tehlikeye atmaktan ve yabancı sermayeyi kaçırmaktan korkmaktadırlar. Bu durum, kirli endüstrilerin gelişmiş ülkelerden gelişmekte olan ülkelere kaymasına neden olmaktadır. Bu çalışmada, sürdürülebilir kalkınma bağlamında, antroposentrikantroposentrik olmayan etik tartışmaların eleştirel bir analizi sunulmaktadır. Geleneksel olarak, insan merkezli kimseler, doğanın bazı özelliklerinin insanlar için ne kadar kullanışlı olduğu yönünde, çevreyi araçsal olarak değerlendirecek kişiler olarak kabul edilir. Buna karşılık, antroposentrikler doğayı içsel olarak kendi başına değer verirler. Bu bildiride, etik değerin böylesine basit bir ikili model temsilinin çok belirsiz olduğu için eleştirilmektedir. Bunun yerine, çevresel değerin nesnesi, değerin doğası, değer kaynağı, değer teorisi ve değer niteliği olan ahlaki değerin beş boyutunu inceleyerek, sürdürülebilir kalkınmanın kavramını ve uygulanmasını tam olarak ele alacak mantıksal olarak tutarlı bir çevresel etik kümesi oluşturmak mümkündür. Sonuç olarak, sürdürülebilir kalkınma farklı insanlara farklı şeyler ifade etmektedir. Bazılarına göre, sürdürülebilir kalkınmanın özü, parasal patlama ve iflas döngülerinin önlendiği sürekli ekonomik büyümedir. Teknolojik ilerlemeler doğal kaynakların tüketimine ayak uydurduğu sürece, gelecek nesillerin kendine kıyasla eşit ya da daha iyi bir yaşam standardı yaşayabileceğinden emin olabilirken başkalarına göre ise, sürdürülebilir bir toplum, yeryüzünün değiştirilemeyen yönlerini koruyarak büyümeyi arttırmak için yenilenebilir kaynaklara yönelmelidir. Büyüme, temel bir yaşam ihtiyacı olarak devam etmeli, ancak gelecek kuşaklar ve yaşadıkları çevre pahasına olmamalıdır. Anahtar kelimeler: Sürdürülebilir kalkınma, Çevre ekonomisi, Çevre etiği.
533
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Environmental Economy and Environmental Ethics in the Framework of Sustainable Development Melike DOĞAN1,*, Destan SEÇME1, Murat AKTEN1 Süleyman Demirel University Architecture Faculty, Departments of Landscape Architecture, Isparta, Turkey *Responsible author e-mail:
[email protected]
1
Abstract The external costs of environmental economics are very high. As a result of the increase in production and consumption especially with industrial and technological developments, air, water and soil started to pollute, natural resources started to be exhausted and the automatic renewal characteristic of nature has been damaged. The basic aim of developing countries is to develop. However, they are afraid of risking this aim with the application of environmental policies and frightening the foreign investment. As a result, this causes the transfer of dirty industries from developed countries to developing countries. This paper presents a critical analysis of the anthropocentric-nonanthropocentric ethical debate in the context of sustainable development. Traditionally, anthropocentrics are regarded as those who value the environment instrumentally, for the usefulness which certain features of nature have for humans. By contrast, nonanthropocentrics value nature intrinsically, in its own right. In this paper, such a simple bi-modal representation of ethical value is criticized for being too vague. Instead, by examining five dimensions of ethical value, the object of environmental value, the nature of value, the source of value, the theory of value and the attribution of value, it is possible to construct a logically coherent set of environmental ethics which can fully address the concept and implementation of sustainable development. Consequently, sustainable development means different things to different people. To some, the essence of sustainable development is sustained economic growth, where cycles of monetary boom and bust are avoided. So long as technological advances keep pace with consumption of natural resources, we may feel assured that future generations will be able to experience an equal or improved standard of living compared to our own. To others, a sustainable society must turn to renewable resources to enhance growth, whilst protecting those aspects of the environment that cannot be replaced. Growth should continue, as a basic need of life, but not at the expense of future generations and the environment they inhabit. Key words: Sustainable development, Environmental economics, Environmental ethics.
534
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sığırladaki Mastitis Vakalarından İzole Edilen Staphylococcus Aureus İzolatlarının Artan Antibiyotik Dirençlilikleri Meriç Lütfi AVSEVER1,* Aksaray Üniversitesi, Eskil Meslek Yüksekokulu, Veteriner ve Laboratuvar Bilimleri Bölümü, AksarayTürkiye *Sorumlu yazar e-posta:
[email protected]
1
Özet Süt sığırcılığındaki en önemli sorunlardan birisi mastitis vakalarıdır. Mastitis vakalarının etiyolojisinde en önemli yeri bakteriyel hastalıklar oluşturmaktadır. Bu etkenler içerisinde ise Staphylococcus aureus bakterisi yüksek patojenitesi ile ayrı bir öneme sahiptir. S. aureus mastitisi yüzünden her yıl yüksek süt verimli birçok inek ölmekte, kesime gönderilmekte ya da meme loblarının biri ya da bir kaçı kör olmaktadır. Mastitis vakalarını kontrol etmek için antibiyotik kullanılmakta, ancak yanlış antibiyotik uygulamaları sonucunda bakteriler antibiyotiklere hızla direnç kazanmaktadır. Bu çalışmada Ege bölgesindeki işletmelerden laboratuvara gönderilen mastitisli 20 ineğe ait süt numunesinden izole edilmiş 20 adet S. aureus izolatı disk diffüzyon yöntemiyle çalışılmış ve 6 izolat (% 30) seftiofur ve gentamisin’e, 2 izolat ( % 10) seftiofur’a, 12 izolat ise kullanılan tüm etken maddelere dirençli bulunmuştur. Çalışmada kullanılan antibiyotikler: Amoksisilin + klavulonik asit (30 μg), linkomisin + spektinomisin (10 μg), neomisin (30 μg), florfenikol (30 μg), enrofloksasin (5 μg), kloksasilin (5 μg), seftiofur (30 μg), gentamisin (10 μg), oksitetrasiklin (30 μg). Bu çalışmanın amacı S. aureus bakterisinin antibiyotik dirençliliğine özellikle dikkat çekmektir. Anahtar kelimeler: Sığır mastitis, Staphylococcus aureus, disk diffuzyon yöntemi.
535
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Increased Antibiotic Resistance Of Staphylococcus Aureus Isolates Isolated From Cattle Mastitis Cases Meriç Lütfi AVSEVER1,* 1
Aksaray University, Eskil Vocation of High School, Laboratory and Veterinary Sciences, Aksaray, Turkey *Responsible author e-mail:
[email protected]
Abstract One of the most important problems in dairy cattle is mastitis cases. The most important place in the etiology of mastitis cases is bacterial diseases. Among these factors, the Staphylococcus aureus bacterium has a distinctive pattern with its high pathogenicity. Because of the S. aureus mastitis, many cows with high milk yields die each year, sent to the cut, or one or several of the breast lobes blind. Antibiotics are used to control mastitis cases, but as a result of improper antibiotic administration, the bacteria are rapidly becoming resistant to antibiotics. In this study, 20 S. aureus isolates from 20 cattle with mastitis in Aegean region were used. As a result of this, 6 isolates (30%) were susceptible for ceftiofur and gentamycin, 2 isolates (10%) were susceptible for ceftiofur only, 12 isolates were found to be resistant for all antibiotics. Antibiotics used in the study: Amoxicillin + clavulonic acid (30 μg), linkomycin + spectinomycin (10 μg), neomycin (30 μg), florfenicol (30 μg), enrofloxacin (5 μg), cloxacilin (5 μg), ceftiofur (30 μg) , gentamycin (10 μg), oxytetracycline (30 μg). The aim of this study is to draw particular attention to the antibiotic resistance of S. aureus. Key words: Cattle mastitis, Staphylococcus aureus, disk diffusion method.
536
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Türkiye’de Kültüre Edilen Kara Kaplumbağalarından (Testudo Graeca Ibera ) Salmonella Spp. İzolasyonu Meriç Lütfi AVSEVER1,* Aksaray Üniversitesi, Eskil Meslek Yüksekokulu, Veteriner ve Laboratuvar Bilimleri Bölümü, AksarayTürkiye *Sorumlu yazar e-posta:
[email protected]
1
Özet Kaplumbağalar Salmonella türlerinin en önemli taşıyıcılarıdır. Amerika’da yapılan çalışmalarda çocuklardaki salmonellosis vakalarının en çok kaplumbağalardan bulaştığı ortaya konmuştur. Kaplumbağalar ülkemizin her yerinde doğada bulunmakla birlikte Ege bölgemizde 40-50.000 kapasiteli bir kaplumbağa çiftliği yer almaktadır. Burada yetiştirilen kaplumbağaların tamamı yurt dışına satılmaktadır. Bu çalışmada söz konusu bu kaplumbağa çiftliğinden rastgele olarak seçilen 43 kara kaplumbağası Salmonella spp. yününden araştırılmıştır. Bunun için kaplumbağalardan alınan fekal sıvap örnekleri kullanılmıştır. Yapılan çalışmada 43 fekal sıvap örneğinin 6’sından (% 13.95) Salmonella spp. izole edilmiştir. Şuan izolatların antijenik yapıları araştırılmakta ve insanlar için patojen türler olup olmadıkları anlaşılmaya çalışılmaktadır. Bu çalışmanın amacı ülkemizde yetiştirilen kaplumbağaların taşıdıkları salmonella türleri hakkında ön fikir sahibi olmaktır. Çalışma daha fazla örnek alınarak genişletilecektir. Anahtar kelimeler: Testudo graeca ibera, Salmonella spp. İzolasyon.
537
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Isolation Of Salmonella Spp. From Land Turtles (Testudo Graeca ibera) Cultured İn Turkey Meriç Lütfi AVSEVER1,* 1
Aksaray University, Eskil Vocation of High School, Laboratory and Veterinary Sciences, Aksaray, Turkey *Responsible author e-mail:
[email protected]
Abstract Turtles are the most important carriers of Salmonella species. Studies in America have shown that the most common cases of salmonellosis in children were sourced from turtles. Turtles are everywhere in our country in nature and there are a turtle farm 40-50,000-capacity in Agean region of Turkey. All turtles grown here are sold abroad. In this work, 43 land turtles selected randomly from this turtle farm were investigated for Salmonella spp. For this, fecal swap samples taken from turtles were used. In the study, Salmonella spp. were isolated from 6 of 43 (13.95 %) fecal swap samples. Antigenic structures of these isolates are being investigated and it is attempted to understand whether they are pathogenic species for humans. The aim of this study is to have a preliminary idea about the species of salmonella which the turtles cultured in our country. More examples will be collect in future. Key words: Testudo graeca ibera, Salmonella spp. İsolation.
538
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Ülkemizde Yeşil Çatı Sistemlerinde Yetiştirme Ortamı Olarak Kullanılabilecek Yerel Maddelerin Değerlendirilmesi Mert EKŞİ1,*, Orhan SEVGİ2, Serdar AKBURAK2, Hüseyin YURTSEVEN2, İlker ESİN3 İstanbul Üniversitesi Orman Fakültesi Peyzaj Mimarlığı Bölümü Peyzaj Teknikleri Anabilim Dalı, İstanbul, TÜRKİYE 2 İstanbul Üniversitesi Orman Fakültesi Orman Mühendisliği Bölümü Toprak İlmi ve Ekoloji Anabilim Dalı, İstanbul, TÜRKİYE 3 İstanbul Üniversitesi Orman Fakültesi Ormancılık Meslek Yüksekokulu, Sulama Programı, İstanbul, TÜRKİYE 1
*Sorumlu yazar e-posta:
[email protected]
Özet Yeşil çatı sistemleri, son yıllarda fiziksel çevrede içeresindeki olumlu etkileri nedeniyle kentlerin önemli bileşenleri haline dönüşmüşlerdir. Bu sistemler, yapılaşmayla kaybedilmiş bitkisel yüzeylerin binaların üzerinde tekrar yaşatılması yaklaşımı ile oluşturulmakta ve kentlerde çeşitli olumlu etkileri nedeniyle kullanılmaktadırlar. Ülkemizde bu sistemlerin uygulamalarında çoğunlukla yurtdışı kaynaklı yapı malzemelerinin ve yetiştirme ortamlarının yaygın biçimde kullanıldığı görülmektedir. Bu çalışmada, açık sahada gerçekleştirilen deneyler yardımıyla İstanbul ikliminde yeşil çatı sistemlerinde yetiştirme ortamı olarak kullanılması olası atık malzemelerin (kompost, talaş, cüruf, tuğla ya da beton kırığı) yeniden kullanımı ve yerel malzemelerin (perlit, ponza, zeolit) bu sistemlere uygunluğu sürdürülebilirlik ilkesi kapsamında araştırılmıştır. Yeşil çatı uygulamalarında bu tip malzemelerin kullanımı ile kaynakların verimli kullanımı ve yerel iklime uyumlu sistemlerin geliştirilmesi mümkün olacaktır. Anahtar kelimeler: Kent, yeşil çatı sistemleri, yetiştirme ortamı, sürdürülebilirlik, Istanbul. .
539
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Evaluation Of Local Materials For Use As Green Roof Growing Media In Turkey Mert EKŞİ1,*, Orhan SEVGİ2, Serdar AKBURAK2, Hüseyin YURTSEVEN2, İlker ESİN3 1 Istanbul University Faculty of Forestry Landscape Architecture Department, Istanbul, TURKEY Istanbul University Faculty of Forestry Department of Soil Science and Ecology, Istanbul, TURKEY 3 Istanbul University Faculty of Forestry Vocational School of Forestry Irrigation Program, Istanbul, TURKEY 2
Responsible author e-mail:
[email protected]
Abstract Green roof systems have become important components in urban areas because of their positive effects in the built environment. Green roofs are used to sustain lost vegetation due to urbanization and because of their benefits in urban environment. In Turkey, mostly foreign-based construction layers and growing materials are being widely used in green roof applications. In this study, through experimental research methods on an open field usage possibilities of various waste materials (compost, sawdust, slag, crushed brick or concrete) and local materials (perlite, pumice, and zeolite) as growing substrates in Istanbul climate were investigated in terms of sustainability principles. Efficient usage of resources and development of local climate compatible systems will be possible by using those type of materials in green roof applications, Key words:City, green roof systems, growing media, sustainability, Istanbul.
540
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Türkiye’de Sürdürülebilir Ambalaj Tasarıma Sahip Ürünlerin Tüketici Tarafından Talep Edilme Eğilimi Merve ATMACA1,*, Alper ÇALGÜNER2 Gazi Üniversitesi Mimarlık Fakültesi Endüstri Ürünleri Tasarımı, Ankara, Türkiye Gazi Üniversitesi Mimarlık Fakültesi Endüstri Ürünleri Tasarımı, Ankara, Türkiye *Sorumlu yazar e-posta:
[email protected]
1 2
Özet Kavramsal açıdan bakıldığında sürdürülebilirlik, dünyada hayatın var olmasını sağlayan doğal sistemlerin korunması ve iyileştirilmesiyle alakalıdır. Bu sistemlerin sürdürülebilir olabilmesinde insan nüfusu da önemli bir kriterdir. Dünya nüfusunun hızlı artışından dolayı kentler yeni olgu ve problemlerle karşılaşmaktadır. Şehirleşme ve endüstrileşme sürecinde kaynakların kontrolsüz kullanımı ve tüketimi sera etkisi ve ozon tabakası aşınımı gibi çevresel sorunlara yol açmaktadır. Bunun dışında kentlerdeki insan grupları arasındaki sosyal ve ekonomik farklar kentsel olanaklardan faydalanma açısından olumsuz sonuçlar doğurmaktadır. Sürdürülebilirlik kavramının temelinde bulunan çevresel, ekonomik ve sosyal öğeler ile ilgili hareketler gelecek nesiller de düşünülerek yapılmalıdır. Bu noktada, sürdürülebilirlik kavramı hayatımızda olan en küçük elemanlardan büyük yapılara kadar her noktada dikkat edilmesi gereken bir husustur. Ambalajlar tükettiğimiz her maddeyle birlikte ticaret öğesi olarak kullanılmaktadır ve bu noktada kaynak kullanımında ambalaj tüketiminde sürdürülebilir yaklaşımlara ihtiyaç duyulmaktadır. Japon ambalaj enstitüsüne göre (JPI, 2000), ambalajın temel görevi ürünün bozulmasına engel olmak, ürünü zararlardan korumak, dağıtım sürecindeki enerji maliyetini azaltıp onu mantıklı hale getirerek bilgi sağlamaktır. Birçok sorumlu kuruluş içindeki üretici ve tasarımcılar ambalajlarla ilgili sürdürülebilirlik noktasında sıkıntıların farkında olduğu için ürünlerin yaşam döngülerini dikkate almaktadırlar. Fakat, bu probleme katkıda bulunacak kişiler sadece tasarımcı ve üreticiler değildir. Sürdürülebilir gelişim için tüketicilerin de bu duruma katkıda bulunması gerekmektedir. Ambalaj teknolojisine yön veren tüketici hareketleri dağıtımdaki pazar bölünmeleri ve gelişimi çoğunlukla sürdürülebilirlik kavramıyla ters düşmektedir. Bununla birlikte, sürdürülebilir büyümenin sağlanmasında cevap bekleyen en büyük sorulardan biri; sürdürülebilir ambalaj tasarımı için tüketimsel düzeyde karar mekanizmaları nelerdir? Bu soru paralelinde çalışmadan amaçlanan, tüketicinin sürdürülebilir tasarıma gösterdiği önemi ve sürdürülebilir ambalaja sahip ürün satın alma eğiliminin araştırılması yanında sürdürülebilirlik, sürdürülebilir ambalaj tasarımı ve tüketici kavramları incelemektedir. Anahtar kelimeler: Sürdürülebilirlik, sürdürülebilir ambalaj tasarımı, tüketici, tasarım.
541
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Demand Pattern of Consumer with Sustainable Packaging Designs in Turkey Merve ATMACA1,*, Alper ÇALGÜNER 2 1 2
Gazi University Faculty of Architecture Department of Industrial Design, Ankara, Turkey Gazi University Faculty of Architecture Department of Industrial Design, Ankara, Turkey *Responsible author e-mail:
[email protected]
Abstract Sustainability is conceptually related to preservation and improvement of natural systems which ensure the continuation of life on earth. Human population is an important criterion for these systems to be sustainable. Rapid increase in population caused urban areas to face with novel phenomena and problems. Uncontrolled use and consumption of resources during urbanization and industrialization cause environmental problems such as greenhouse effect and destruction of ozone layer. Moreover, social and economic differences among groups of people in urban result in adverse effects in terms of making use of urban opportunities. Acts about environmental, economic, and social elements, which are the bases of the concept of sustainability should be performed considering the future generations. At this point, the concept of sustainability should be given enough importance in every area of our lives from the smallest elements to biggest structures. Packages are used as trade elements with each product we consume. Thus, sustainable approaches on package consumption are required in terms of use of resources. According to Japan Packaging Institute (JPI, 2000), the primary duty of package is to prevent the product from spoiling, preserving the product from being harmed, decrease the cost of energy during distribution, and providing information related to the product. A variety of manufacturers and designers consider the lifecycles of products since they are aware of the problems related to sustainability of packages. However, they are not the only ones to contribute the solution of this problem. Consumers also can contribute to the solution. Consumerism dominating package technology, and market splits and development in distribution mainly contradict the concept of sustainability. Moreover, the biggest question about the ensuring the sustainable growth is: what are the decision mechanisms about sustainable packaging design at the consumer level? In parallel with this question, this study aims at investigating the importance attached to sustainable design by the consumers and their tendency to buy products with sustainable package. It also examines the concepts of sustainability, sustainable package design, and consumer. Key words: Sustainability, sustainable packaging design, consumer, design.
542
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Katı Atık olan Piroliz Edilmiş Erik Çekirdeği ile Metil Mavinin Sulu Çözeltilerinden Giderilmesi Merve PEHLİVAN1,*, Pınar ÇARMAN1, Nazlıhan D. ELİTAŞ1, Ayşe Z. AROĞUZ1 İstanbul Üniversitesi, Mühendislik Fakültesi, Avcılar, Türkiye 34320 * Sorumlu yazar e-posta:
[email protected]
1
Özet Çevre kirliliği, ekosistemde doğal dengeyi bozan çeşitli ekolojik zararlar olarak tanımlanmaktadır. Belirli konsantrasyonun üstünde olan boyarmaddeler, sucul organizmaların zehirlenmesine neden olurlar ve ekosisteme zarar vermektedirler. Çevreye zarar veren atık maddeleri başka bir atık madde kullanarak gidermek en etkili yol olarak kabul edilmektedir. Çok sayıda doğal katı atık maddeler (şeftali çekirdeği, aktifleştirilmiş karbon haline getirilmiş fındık kabukları, hindistan cevizi kabuğu, gibi) etkili adsorbent madde olarak kullanılmaktadırlar. Bu çalışmada, bir katı atık madde olan malta eriğinin çekirdeği piroliz işleminden sonra adsorbent olarak kullanılmıştır ve yine bir atık olan metil mavi boyar maddenin adsorpsiyon prosesi ile sulu çözeltiden giderilmesi incelenmiştir. Adsorpsiyon üzerinde derişimin (30°C, sabit sıcaklıkta) ve sıcaklığın etkisi (0.08 gL-1 sabit derişimde) araştırılmıştır. Adsorpsiyon işleminden önce erik çekirdeği 800°C’de azot atmosferinde proliz edilmiştir. Tüm deneylerde 0.25 g adsorbent madde ve 50 mL hacimde boyar madde çözeltisi kullanılmıştır. Adsorpsiyon yüzdesi 600nm dalga boyunda UV-spektrofotometrede çözeltilerin absorbans değerleri ölçülerek hesaplanmıştır. Adsorpsiyon çok hızlı gerçekleşmiş olup yüzde adsorpsiyon, ilk 30 dakikada, % 90 değerine ulaşmıştır. Boyar maddenin düşük derişimlerinde adsorpsiyon yüzdesi daha yüksek bulunmuştur. Adsorpsiyonun sıcaklıkla değişimi 30°C, 40°C, 50°C, 60°C olmak üzere dört farklı sıcaklıkta incelenmiştir. Yüzde adsorpsiyon sıcaklıkla artmakta olup çok hızla dengeye ulaştığı görülmüştür. Metil mavinin adsorpsiyonunun endotermik yapıda olduğu bulunmuştur. Anahtar kelimeler: Piroliz, Adsorpsiyon, Kinetik, Metilmavi.
543
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Removal of Methyl Blue from Aqueous Solution by Pyrolyzed Plum Kernel, Solid Waste Merve PEHLİVAN1,*, Pınar ÇARMAN1, Nazlıhan D. ELİTAŞ1, Ayşe Z. AROĞUZ1 1
Istanbul University, Engineering Faculty, Avcılar, Türkiye 34320 *Responsible author e-mail:
[email protected]
Abstract Environmental pollution is defined as various ecological damages that disrupt the natural balance in ecosystems. Dyestuffs, being above certain concentrations, can cause poisoning of aquatic organisms and harm the ecosystem. To eliminate the harmful waste by consuming another waste material is considered to be the most effective way. A large number of natural solid waste materials ( Peach kernel, hazelnut shell activated carbon, coconut shell) were used effective adsorbents. In this work, Malta Plum Kernel (MPK), waste material was used as adsorbent after pyrolysis process to investigate the removal of methyl blue from aqueous solution by adsorption process. The effect of the concentration of solution (at 30°C, constant temperature) and the effect of temperature etkisi (0.08 gL-1 constant concentration) on the adsorption have been investigated. MPK had been pyrolyzed at 800 °C in nitrogen atmosphere before the adsorption process. In each experiments, the amount of the adsorbent, MPK was 0.25 g and the solution volume was 50 mL. The percentage of adsorption was calculated by measuring the absorbance values of the dye solutions at 600 nm wavelength using UV-spectrophotometer. The adsorption took place very fast and the adsorption percentage reached 90% in the first 30 mins. The percentage of adsorption was found higher values at lower concentrations of dye solutions, The temperature change of adsorption was investigated at four different temperatures: 30°C, 40°C, 50°C, 60°C. Percentage of the adsorption on MPK increases with temperature and it has been reached equilibrium very fast. The adsorption of methyl blue was found to be endothermic. Key words: Pyrolize, Adsorption, Kinetic, Methyl blue.
544
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Ayvacık Yöresinin Sosyo-Ekonomik Gelişmişlik Düzeyinin Meslek Yüksekokulu Öğrencileri Tarafından Algılanma Düzeyi Selçuk İPEK1, Mesut YÜCESAN2,*, Mehmet ÖKSÜZ2 Çanakkale Onsekiz Mart Üniversitesi, Biga İİBF, Çanakkale, Türkiye Çanakkale Onsekiz Mart Üniversitesi, Ayvacık MYO, Çanakkale, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2
Özet Türkiye de özellikle son yıllardan artan üniversite sayısı, üniversite ve yerel kalkınma arasında ki ilişkinin önem kazanmasına neden olmuştur. Genel beklenti üniversitelerin kuruldukları yörenin sosyo-ekonomik gelişmişlik düzeyini artıracağı yönündedir. Çalışmamızın öncelikli amacı Ayvacık Meslek Yüksekokulu öğrencilerinin yörenin sosyo-ekonomik gelişmişlik düzeyini nasıl algıladıklarını ortaya koymaktır. Bu temel amacın yanında çalışmamız, Ayvacık yöresinin öğrenciler tarafından eksik olarak görülen alanlarını belirleyerek yerel yönetimlerin gelecekte yapacağı çalışmalara yol gösterici olma amacı da taşımaktadır. Söz konusu amaçlara ulaşabilmek için Ayvacık Meslek Yüksekokulu’nda öğrenimine devam eden 395 öğrenci üzerinde anket uygulaması yapılmıştır. Çalışmamızda konu bütünlüğünü sağlamak amacı ile öncelikle üniversite ve yerel kalkınma ilişkisinin teorik çerçevesi özetlenmiştir. Daha sonra çalışmamızda kullanılan yöntem ve metodoloji hakkında bilgi verilerek son bölümde anket uygulamasının çıktıları sonuç ve öneriler başlığı altında aktarılmıştır. Anahtar kelimeler: Meslek Yüksekokulu, Ayvacık, Yerel Kalkınma.
545
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Assessment of Socio-Economic Development Level of Ayvacık Region by Vocational School Students Selçuk İPEK1, Mesut YÜCESAN2,*, Mehmet ÖKSÜZ2 Çanakkale Onsekiz Mart University, Biga İİBF, Çanakkale, Türkiye Çanakkale Onsekiz Mart University, Ayvacık MYO, Çanakkale, Türkiye *Responsible author e-mail:
[email protected] 1
2
Abstract Increasing number of universities in Turkey, especially in recent years, has reinforced relationship between the universities and local development. Universities are expected to increase socio-economic development level of their region. The primary aim of this study is to indicate perceptions of Ayvacık Vocational School students related socio-economic development level of the region. It is also aimed to determine shortcomings of the region and to lead future investments of local governments. A survey research has been carried out on 395 students of Ayvacık Vocational School to fulfill purposes of the study. Theoretical framework of university and local development relationship is summarized to provide topic integrity of the study. Thereafter, it has been dealt with methods and methodology in the study. Finally, the results of the survey have been stated under conclusion and recommendations part. Key words: Vocational College, Ayvacık, Local Development.
546
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Are Turkish Smart Cities Really Planned as Smart City? The Case of Karaman and Kars Mete ADIGÜZEL1,*, Serap KAYASÜ 2 1
Necmettin Erbakan University, Konya, Turkey Middle East Technical University, Ankara, Turkey *Responsible author e-mail:
[email protected] 2
Abstract Researches show that rapid increase in world population, industrialization and technological advancements result in rapid urbanization process in the world, which is 34% in 1960, up to 54% in today and expected to reach 70s in 2050. This process led to complex problems in urban areas such as bad air quality, depletion of resources, traffic congestion and so on. In order to solve these problems, traditional solutions will be inadequate if they are not integrated with smart solutions. At this point, the concept of smart city becomes a hot topic in the technology era as enabler of sustainability in urban areas. Most of the public authorities, international organizations, technology firms and researchers are interested in the term closely. Nevertheless, there is no consensus on the definition of smart cities. Unfortunately, due to the fact that the concept of smart city has close relation with technology, technology firms rather than technical staffs like planners, architects and engineers manipulate the concept of smart city for their own benefits. Similarly, in Turkey, smart city projects are led by telecommunication firms like Turk Telekom and Vodafone. As a consequence, the pilot projects of smart cities in Turkey are started in Karaman and Kars by Turk Telekom. Therefore, Turkish smart city initiatives are deeply based on technology infrastructure. This will unfortunately cause Turkish smart cities to indicate poor performance. Therefore, in this study, the term of smart city will be clarified and policies of two pilot smart city projects of Turkey; Karaman and Kars will be discussed and evaluated according to smart city characteristics. Key words: Smart City, Sustainability, Turkish Smart Cities, Karaman and Kars.
547
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Akıllı Türk Kentleri Gerçekten Akıllı Kent Olarak Planlanıyor mu? Karaman ve Kars Örneği Mete ADIGÜZEL1,*, Serap KAYASÜ2 Necmettin Erbakan Üniversitesi, Konya, Türkiye Orta Doğu Teknik Üniversitesi, Ankara, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2
Özet Araştırmalar, dünya nüfusundaki hızlı artışın, sanayileşmenin ve teknolojik ilerlemenin, 1960 yılında% 34, günümüzde% 54 olan ve 2050'de 70'lere ulaşması beklenilen hızlı kentleşme sürecine yol açtığını göstermektedir. Bu süreç, kentlerde kötü hava kalitesi, kaynakların tüketilmesi, trafik sıkışıklığı gibi birçok karmaşık probleme neden olmaktadır. Bu sorunların çözümünde akıllı çözümler entegre edilmezse geleneksel çözümler yetersiz kalacaktır. Bu noktada, akıllı kent kavramı, kentlerde sürdürülebilirlik kavramının mümkün kılan ve teknoloji çağının güncel konusu olarak ortaya çıkmaktadır. Kamu otoritelerinin, uluslararası örgütlerin, teknoloji firmalarının ve araştırmacıların birçoğu bu terimle yakından ilgilenmektedir. Buna rağmen akıllı kentler tanımında ortak bir tanım bulunmamaktadır. Ne yazık ki akıllı kent kavramının teknoloji ile yakın ilişkisi, plancılar, mimarlar ve mühendisler gibi teknik personeller yerine teknoloji firmalarının bu terimi kendi çıkarları uğruna yönlendirmesine yol açmaktadır. Aynı şekilde, Türkiye’de de akıllı kent projeleri, Türk Telekom ve Vodafone gibi telekomünikasyon firmaları tarafından yapılmaktadır. Bunun sonucu olarak, Türkiye’nin ilk akıllı kent pilot proje uygulamaları Karaman ve Kars illerinde, Türk Telekom firması tarafından gerçekleşmektedir. Dolayısı ile akıllı Türk kentleri girişimleri yoğun bir şekilde teknoloji altyapısı üzerine odaklanmaktadır. Bu da ne yazık ki akıllı Türk kentlerinin akıllık performansının düşük olmasına sebep olacaktır. Bunların sonucunda, bu çalışma, akıllı kent kavramını daha açık bir biçimde açıklamayı ve Türkiye’nin ilk iki akıllı kent pilot projeleri olan Karaman ve Kars illerinin akıllı kent politikalarının, akıllı kent kriterleri bağlamında tartışılması ve değerlendirilmesini amaçlamaktadır. Anahtar kelimeler: Akıllı Kent, Sürdürülebilirlik, Türk Akıllı Kentleri, Karaman ve Kars.
548
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürdürülebilir Tekstil Üretiminde “Organik Pamuk” ve Önemi Mihriban KALKANCI1,* Pamukkale Üniversitesi, Denizli, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
Özet Tekstil ve hazır giyim sektörü ülkemiz ekonomisinin de lider sektörlerinden birisi olup, ihracat gelirlerinin %22’sına tekabül etmektedir. Sektörde yaklaşık 2 milyon kişi çalışmakta olup, Türkiye’nin en büyük istihdam grubunu temsil etmektedir. Sektörün büyüklüğü ile paralel olarak ülkemizde ve dünyada önemli çevresel sorunlar oluşmaktadır. Tekstil üretiminde en yoğun kullanılan liflerden birisi pamuktur ve ülkemizin lokomotif sektörü olan tekstil sanayisinin stratejik ham maddesi pamuktur. Ancak pamuk üretiminde kullanılan kimyasallar ve aşırı su tüketimi ekolojik sorunların da artmasına neden olmuştur. Dünyada kullanılan tarım ilaçlarının önemli bir bölümü pamuk üretiminde kullanılmaktadır ve bu yüzden pamuğa alternatif olarak öne sürülen “organik pamuk”a olan talep dünyada ve ülkemizde giderek artmaktadır. Organik pamuk ve organik pamuktan yapılan tekstil ürünleri çevreye ve insana duyarlı bir üretim sürecinden geçmektedir, bu nedenle organik tarım geleneksel üretime göre çevreye, ekonomiye ve sosyal gelişmeye olumlu katkı sağlayan bir üretim biçimidir. Organik tarımsal üretim, sürdürülebilir tarımsal gelişmenin gerçekleştirilmesinde değerlendirilmek zorunda olan yeni bir üretim sistemidir. Bu araştırmanın amacı, tekstilde sürdürülebilir üretim için geleneksel pamuk üretimi ve organik pamuk üretimi sırasında ortaya çıkan çevresel etkileri tespit etmektir. Organik pamuğun kullanımı ve üretimi ile süreçler ve günümüzdeki etkileri araştırılmıştır. Son yıllarda dünyada öne çıkan ekolojik üretim ve sürdürülebilirlik gibi kavramlarla, organik pamuk üretimi oldukça örtüşmektedir. Sonuç olarak, ülkemiz için üretimde, istihdamda ve ihracatta çok önemli bir yer işgal eden tekstil sektörünün geleceği için organik pamuk üretimi oldukça önemlidir. Anahtar kelimeler: Organik Pamuk, Sürdürülebilirlik, Çevre.
549
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Significance of “Organic Cotton” in Sustainable Textile Manufacturing Mihriban KALKANCI1* Pamukkale Üniversity, Denizli, Türkiye *Responsible author e-mail:
[email protected] 1
Abstract The textile and apparel sector is one of the leading sectors of our country's economy, accounting for 22% of export revenues. Approximately 2 million people are employed in the sector and represent Turkey's largest employment group. Parallel to the size of the sector, there are significant environmental problems in our country and in the world. One of the most used fibers in textile production is cotton. The strategic raw material of the textile industry, which is the locomotive sector of our country, is cotton. However, the chemicals used in cotton production and excessive water consumption have also caused ecological problems to increase. A significant part of the pesticides used in the world are used in cotton production, and therefore the demand for "organic cotton", which is an alternative to cotton, is increasing in the world and in our country. Organic cotton and textile products made of organic cotton go through a production process that is environmentally and personally sensitive, so organic farming is a form of production that contributes positively to environment, economy and social development compared to traditional production. Organic agricultural production is a new production system which has to be evaluated in the realization of sustainable agricultural development. The purpose of this research is to determine the environmental impacts that occur during traditional cotton production and organic cotton production for sustainable production in textiles. The usage and production of organic cotton, the processes and the current effects have been researched. In recent years, organic cotton production is overlapping with concepts such as ecological production and sustainability that stand out in the world. As a result, production of organic cotton is very important for the future of the textile industry, which occupies a very important place in production, employment and export for our country. Key words: Organic cotton, Sustainability, Environment.
550
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Bina Cephe Elemanlarının Yaşam Döngüsü Değerlendirme Süreçlerinde Kullanılan Yöntemlerinin İncelenmesi Mine KURTAY1,*, Hakan Arslan1, Yasemin Erdoğdu1 Düzce Üniversitesi, Düzce, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
Özet Dünyadaki yenilenemeyen enerji kaynaklarının hızla tükenmesi ve özellikle inşaat sektörünün küresel enerji tüketiminin üçte birinden daha fazlasına yol açması sürdürülebilirlik, yeşil binalar ve çevre dostu yapı malzemeleri kavramlarının ön plana çıkmasına yol açmıştır. Yeşil binalar planlama, tasarım, inşaat, yıkım ve yeniden kullanım döngüsü boyunca çevresel etkiyi ve kaynakların kullanımını minimize eden yapılar olarak tanımlanmaktadır. Bu binalar tasarlanırken, yapısal çevrenin insan sağlığı ve doğa üzerindeki olumsuz etkilerini azaltmak; enerji, su ve doğal kaynakları verimli bir şekilde kullanmak, kullanıcı sağlığını korumak ve üretkenliği geliştirmek, atık, israf, kirlilik ve çevresel tahribatı azaltarak binaların karbon ve su ayak izini azaltmak amaçlanmaktadır. Öte yandan binalarda kullanılan malzemelerin üretildiği yapı malzemeleri sektörü; Çimento, demir-çelik (inşaat demiri), alçı, boya (dekoratif boya), düz cam, doğaltaş-mermer, iklimlendirme, klima, soğutma, seramik kaplama malzemeleri, alüminyum-demir-çelik-seramik sağlık gereçleri, elektrik malzemeleri, aydınlatma cihazları, ağaç ürünleri, kilit, donanım eşyaları, asansör, duvar kâğıdı, mineral yün, radyatör, plastik, yalıtımlı kablo, boru ve boru bağlantılarını da kapsayan çok geniş bir alana yayılmaktadır. Bu çalışmada Dünyada yeşil bina cephe elemanlarının tasarımı ve uygulamalarında yaşam döngüsü değerlendirme yaklaşımıyla ele alınmış ve son 5 yılda SCI kapsamındaki dergilerde basılmış makaleler kullandıkları yöntemler açısından incelenmiştir. Bu kapsamda üst başlık olarak belirlediğimiz bina yaşam döngüsü ile literatürde tarama yapılmıştır. Ancak, yapılan taramalarda 5035 gibi geniş bir sonuç aralığı ortaya çıkması nedeniyle çalışma bina cephe elemanları ile sınırlandırılmıştır. Bu kapsamda incelenen 10 adet SCI indeksli makale amaç, kullanılan değerlendirme yöntemi ve bulguları bağlamında karşılaştırmalı olarak meta analiz yöntemiyle incelenmiştir. Sonuç olarak bina cephe elemanları üretimi, tasarımı, uygulanması ve yeniden kullanımına ilişkin yöntemsel yaklaşımlar sentezlenerek cephe elemanlarının optimizasyonuna ilişkin öneriler sunulmuştur. Anahtar kelimeler: Yaşam döngüsü Değerlendirmesi, Bina Cephe Elemanları, Metodolojik yaklaşımlar.
551
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Investigation of Methods Used in Life Cycle Assessment of Building Facade Elements Mine KURTAY1,*, Hakan Arslan1, Yasemin Erdoğdu1 Düzce Üniversitesi, Düzce, Türkiye *Responsible author e-mail:
[email protected] 1
Abstract The rapid depletion of non-renewable energy sources around the world, and especially the one in construction sector leading to more than a third of global energy consumption, led sustainability to the forefront of green buildings and environmentally friendly building materials concepts. Green buildings are defined as constructions that minimize the environmental impact and use of resources throughout the planning, design, construction, demolition and reuse cycle. When designing these buildings, by reducing the structural environment's adverse effects on human health and nature; It is aimed to use energy, water and natural resources efficiently, to protect user health and improve productivity, to reduce the carbon footprint of buildings by reducing waste, waste, pollution and environmental damage. On the other hand, in building materials sector where materials used in buildings are produced; Aluminum-iron-steel-ceramic sanitary ware, electrical equipments, lighting devices, cement, iron-steel (construction iron), plaster, painting (decorative painting), flat glass, natural stone-marble, air conditioning, is spread over a very wide area including wooden products, locks, hardware goods, elevator, wall paper, mineral wool, radiator, plastic, insulated cable, pipe and pipe connections. In this study, the design and application of the green building facade elements in the world were discussed with the approach of life cycle assessment, and the articles published in SCI journals over the last 5 years were examined in terms of the methods they used. In this context, the literature has been searched with the building life cycle which we have determined as the top title. However, because of the wide range of results such as 5035, the study was limited to building facade elements. In this context, 10 SCI-indexed articles were examined by means of meta-analysis in terms of purpose, evaluation method and findings. As a result, methodological approaches to the production, design, application and reuse of building facade elements were synthesized and suggestions for the optimization of facade elements were presented. Key words: Life Cycle Assessment, Building Facade Elements.
552
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Kent Kıyılarının Dolgu Alanlarında Rüzgar Şiddetine Bağlı Olarak Kullanım Yoğunluğunun Düşmesi Sorununun Maltepe Dolgu Alanında Tespiti Doç.Dr.Funda ÖZTÜRK KERESTECİOĞLU1, Yüksek Lisans Öğrencisi Mimar Miray ATMACA2,* Yıldız Teknik Üniversitesi, İstanbul, Türkiye Yıldız Teknik Üniversitesi, İstanbul, Türkiye * Sorumlu Yazar e-posta:
[email protected] 1
2
Özet Kıyı alanları ihtiyaca göre değişik kullanım alanları olarak planlanmıştır. Kullanım alanlarından biri de dolgu alanlarıdır. Dolgu alanları planlanırken, alan tasarımında doğal verilerin kullanımı hesaba katılmadığı düşünülmektedir. Rüzgar yaşam kalitesini doğrudan etkileyen bir doğal elemandır. Yapılan literatür çalışmalarında bir iklimsel veri olan rüzgarın, tasarım kriterlerinde belirleyici eleman olarak tasarıma dahil edilmesi gerektiği görülmüştür. Aksi takdir de konforsuz açık alanlar ortaya çıkmaktadır. Veriler göz önünde bulundurularak, Maltepe dolgu alanında doldurulmadan önceki kıyı alanından farklı iklimsel verilere sahip olduğu düşünülmektedir. Alanda kullanım oranlarının ise doldurulmadan önceki kullanıma göre düştüğü düşünülmektedir. Kullanıcı oranının kullanıcı tipine ve mevsime göre de değişiklik gösterdiğine iki yıllık bireysel gözlem ile varılmıştır. Projede amaç, Maltepe dolgu alanındaki kullanım oranının rüzgar şiddetine bağlı olarak değiştiği sorununu ortaya koymaktır. Çalışma İstanbul Maltepe’de yer alan dolgu alanını belirtilen tasarım ölçütü rüzgar hızı açısından inceleyerek, kullanım yoğunluğuyla alakalı bir tespit çalışması yapmıştır. Edinilen skalalarda açık alanda 5 m/s hızın üzerinde rüzgar hızının, kullanıcının rahatsız olduğu eşik değer kabul edilmiştir. Metot ve materyaller;
Maltepe kıyısı rüzgar yönü ve hızını analiz eden harita ve grafikler elde edildi. Belirlenen 3 noktada rüzgar ölçüm cihazları ile aynı anda ölçümler yapıldı. Kullanıcılar ile anket yapıldı. Kullanım oranını değerlendirmek adına alanın fotoğrafları çekildi.
İncelemeler sonucunda rüzgar ve kullanıcı arasındaki ilişkinin Maltepe dolgu alanı örneğinde tespitleri yapıldı. Rüzgarın alan kullanımını etkilediği sonucuna ulaşıldı. Rüzgarın dolgu alanlardaki kullanıcı üzerindeki etkisine göre tasarımcıların açık alan düzenlemelerinde alacağı önlemler konusundaki ihtiyaç ortaya çıkarıldı. Bu çalışma Yıldız Teknik Üniversitesi Bilimsel Araştırma Projeleri Koordinatörlüğü tarafından desteklenmektedir. Proje Numarası: 2016-03-01-YL02 Anahtar kelimeler: Kıyı alanları, dolgu alanları, rüzgar, yaşam kalitesi, konforlu alanlar, alan kullanım yoğunluğu endişesi.
553
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
554
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Investigation of the Relationship Between Wind Force and Decreasing the Intensity of Usage in Maltepe Coastal Fill Area Assoc.Prof. Dr. Funda ÖZTÜRK KERESTECİOĞLU1, Graduate Student Architect Miray ATMACA2,* Yıldız Technical University, İstanbul, Türkiye Yıldız Technical University, İstanbul, Türkiye * Responsible author e-posta:
[email protected] 1
2
Abstract Coastal areas are planned as different areas of utilization according to the needs. One of the usage is the fill areas. However, it has been thought that using of natural data is not considered in architectural design while landfills were planning. Wind is a natural element that directly affect the quality of life. It has been seen that the wind, should be included in design studies as a determining element in the design criteria. Otherwise, open spaces become uncomfortable. It has been suggested that landfills of Maltepe coastal areas have different climatic data before being filled. It has been thought that the utilization rate of coastal areas decrease comparing usage of unfilled areas. It has been showed with two-year individual observations that the rate changes according to users and climate. The aim of the project is to reveal the problem that the usage rate in Maltepe/İstanbul fill area changes depending on the wind intensity. In this study filling area examined in terms of wind speed and determined the intensity of usaged. According to obtained datas, the speed of the wind above 5 m/s in the open area is taken as the threshold value at where the user is disturbed. Methods and materials;
Maps and graphics obtained which show the direction and speed of the wind in Maltepe coast. In the project, gale force was measured by anemometer and users of the areas were examined by questionnaire in three different specified area. In add, the photos are taken at the area for examine rate of use.
The relationship between the wind and the users was determined by the investigation in the sample of Maltepe landfills. The result is the wind affects the use of the field. According to the wind effect on users at the landfills areas, it was revealed that designers needs to consider measurement of the gale force in open space regulations. This study was supported by Yıldız Technical University Scientific Research Projects Coordinatorship. Project Number: 2016-03-01-YL02. Key words: Coastal areas, fill areas, wind, life quality, comfortable areas, concern about usage intensity.
555
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sustainable Agricultural Development Mithat Direk1,* Selçuk University, Faculty of AgricultureAgricultural Economics Department Agricultural Management, Konya, Turkey
1
*
Responsible author e-mail:
[email protected]
Abstract Sustainable agriculture is a way of practicing agriculture which seeks to optimize skills and technology to achieve long-term stability of the agricultural enterprise, environmental protection, and consumer safety. It is achieved through management strategies which help the producer select hybrids and varieties, soil conserving cultural practices, soil fertility programs, crop rotations, weed, pest and disease biological management programs, and strategic use of animal and green manures and use of natural or synthetic inputs in a way that poses no significant hazard to man, animals, or the environment. The system is envisioned in its broadest sense, from the individual farm, to the local ecosystem, and to communities affected by this farming system both locally and globally. The goal of sustainable agriculture is to minimize adverse impacts to the immediate and off-farm environments while providing a sustained level of production and profit. Sound resource conservation is an integral part of the means to achieve sustainable agriculture. Sustainable agriculture integrates three main goals--environmental health, economic profitability, and social and economic equity. A variety of philosophies, policies and practices have contributed to these goals. People in many different capacities, from farmers to consumers, have shared this vision and contributed to it. Despite the diversity of people and perspectives, the following themes commonly weave through definitions of sustainable agriculture. We are yet a long way from knowing just what methods and systems in diverse locations will really lead to sustainability. In many regions of the country, however, and for many crops, the particular mix of methods that will allow curtailing use of harmful farm chemicals or building crop diversity, while also providing economic success, are not yet clear. The stage is set for challenging not only farm practitioners, but also researchers, educators, and farm industry. New policies are needed to simultaneously promote environmental health, economic profitability, and social and economic equity. For example, commodity and price support programs could be restructured to allow farmers to realize the full benefits of the productivity gains made possible through alternative practices. Government and land grant university research policies could be modified to emphasize the development of sustainable alternatives. Marketing orders and cosmetic standards could be amended to encourage reduced pesticide use. Coalitions must be created to address these policy concerns at the local, regional, and national level. In addition to strategies for preserving natural resources and changing production practices, sustainable agriculture requires a
556
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
commitment to changing public policies, economic institutions, and social values. Strategies for change must take into account the complex, reciprocal and ever-changing relationship between agricultural production and the broader society. Critical discussion of the sustainable agriculture concept will and should continue. Understanding will deepen; answers will continue to come. On-going dialog is important for another reason: with more parties, each with its own agenda, jumping into the sustainable agriculture "tent," only a continued focus on the real issues and goals will keep sustainable agriculture from becoming so all-encompassing as to become meaningless. Key words: sustainable agriculture, agricultural development, agricultural & environmental relationships.
557
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
V Tipi Bir Stirling Motorunun Termodinamik Analizi Fatih AKSOY1, Muhammed ARSLAN1,*, Can ÇINAR2, Hamit SOLMAZ2 Afyon Kocatepe Üniversitesi, Afyonkarahisar, Türkiye 2 Gazi Üniversitesi, Ankara, Türkiye *Sorumlu yazar e-posta:
[email protected]
1
Özet Her ülkenin enerji ihtiyacı günden güne artmakta ve ülkeler bu enerji ihtiyacını ilk olarak petrol kaynaklı yakıtlardan karşılamaktadır. Ancak petrol kaynaklı yakıtların enerji üretiminde kullanımı ile çevreye ciddi derecede zararlar verilmekte, bu durumun ise acilen çözülmesi gerekmektedir. Dolayısıyla ülkeler çevre dostu, sürdürülebilir ve ucuz alternatif enerji kaynaklarına yönelmiş, bu kaynaklarla çalışabilen motorlar üretmeye başlamıştır. Stirling motorları tüm enerji kaynaklarıyla çalışabilen dıştan yanmalı motorlardır. Stirling çevrimine göre çalışan bu motorların sessiz çalışma, düşük emisyon değerleri, düşük bakım ve masraf maliyetleri, yüksek verim, geniş enerji kaynağı yelpazesi gibi avantajları bulunmaktadır. Bu çalışmada, değişken faz açılı bir alfa tipi bir Stirling motoru tanımlanmış ve kinematik ve termodinamik açıdan analiz edilmiştir. Kinematik ilişkiler soğuk ve sıcak silindir hacimlerin hesaplanmasında tanımlanmıştır. Çalışma akışkanının anlık sıcaklık dağılımı, ısıtma-soğutma geçişi ve rejeneratör boyunca, FORTRAN programında bir nodal analiz hazırlanarak hesaplanmıştır. 80, 85, 90, 95 ve 100 ° olmak üzere değişken faz açısının iş üretimine etkisi araştırılmıştır. 200, 300 ve 400 W/m2K olmak üzere üç farklı konvektif ısı transfer katsayısı kullanılarak çalışma akışkanı kütlesi ile iş üretimi değişimi araştırılmıştır. Aynı konvektif ısı transfer katsayıları için motor gücü ile motor devrinin değişimi incelenmiştir. Yapılan termodinamik analizlere göre en iyi sonuçlar, 400 W/m2K ısı transfer katsayısı için 80 ° faz farkında elde edilmiştir. Anahtar kelimeler: Stirling motoru, Termodinamik analiz, Değişken faz açısı, Kinematik ilişkiler.
558
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Therdynamic Analysis of A V-Type Stirling Engine Fatih AKSOY1, Muhammed ARSLAN1,*, Can ÇINAR2, Hamit SOLMAZ2 1
Afyon Kocatepe University, Afyonkarahisar, Turkey 2 Gazi University, Ankara, Turkey *Responsible author e-mail:
[email protected]
Abstract The energy requirement of each country increases day by day, and countries meet this energy need first from petroleum-derived fuels. However, the use of petroleum-derived fuels in energy production is causing serious damage to the environment, which must be resolved urgently. Therefore, the countries have started to produce engines capable of working with these environment-friendly, sustainable and cheap alternative energy sources. Stirling engines are externally combustion engines that operate with all sources of energy. These engines, which operate according to the Stirling cycle, have advantages such as quiet operation, low emission values, low maintenance and cost costs, high efficiency, wide range of energy sources. In In this study, a variable phase angle, α-type Stirling engine was described and analysed from kinematic and thermodynamics point of view. Kinematic relations were described for the calculation of hot and cold cylinder volumes. The instantaneous temperature distribution of the working fluid, through the heating—cooling passages and regenerator, was calculated by preparing a nodal analysis in FORTRAN. The effect of phase angle variation as 80, 85, 90, 95 and 100 ° on work generation was examined. By using three different convective heat transfer coefficients, which were 200, 300, and 400 W/m2K, variation of work generation with working fluid mass was examined. For the same values of convective heat transfer coefficients, variation of engine power versus the engine speed was examined. According to the thermodynamic analysis, the best performance was measured for 80 ° of variable phase angle at 400 W/m2K of heat transfer coefficient. Key words: Stirling engine, Thermodynamic analysis, Variable phase angle, Kinematic relations.
559
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Beta Tipi Bir Stirling Motorunda Rejeneratör Hacminin Motor Performansına Etkisi Fatih AKSOY1, Muhammed ARSLAN1,*, Hamit SOLMAZ2, Afyon Kocatepe Üniversitesi, Afyonkarahisar, Türkiye 2 Gazi Üniversitesi, Ankara, Türkiye *Sorumlu yazar e-posta:
[email protected]
1
Özet Fosil bazlı enerji kaynaklarının yüksek fiyatları ve sebep olduğu hava kirliliği ve ekonomik krizler, insanoğlunu alternatif ve sürdürülebilir enerji arayışına yöneltmiştir. Nükleer, güneş, gel git, rüzgâr, biyokütle jeotermal enerji kaynakları vb. bu alternatif ve sürdürülebilir enerji kaynaklarına örnektir. Bu enerji kaynakları ile çalışabilen ve mevcut enerji sorununa çözüm olabilecek motorlardan birisi Stirling motorudur. Stirling çevrimine göre çalışan dıştan yanmalı bu motorların teorik termik verimleri aynı sıcaklık şartlarında Carnot çevriminin verimiyle aynıdır. Bu çalışmada, rhombic hareket iletim mekanizması sahip, beta tipi bir Stirling motorunun imalatı yapılmış ve performans testleri gerçekleştirilmiştir. Verimin artırılması ve rejeneratör hacminin motor performansı üzerindeki etkisini belirlemek amacıyla motorda %15 doluluk oranında, 0.15 mm çapında, paslanmaz çelik tel hasırdan yapılmış 60 cm3 (reneratör-I) ve 120 cm3 (rejeneratör-II) hacme sahip iki adet renejeratör kullanılmış ve rejeneratör hacminin motor performansına etkisi araştırılmıştır. Ayrıca hareket iletim mekanizmasında güç çıkışını artırmak ve daha sessiz bir çalışma için düz dişli yerine helisel dişli kullanılmış, krank mili üzerinde dişliler çift taraflı yataklandırılmıştır. Deneyler farklı sıcak uç sıcaklıklarında ve şarj basınçlarında çalışma akışkanı olarak helyum kullanılarak gerçekleştirilmiştir. Yapılan deneylerin sonucunda maksimum motor gücü ve momenti, 800 °C sıcak uç sıcaklığında ve 5 bar şarj basıncında rejeneratör-I kullanılarak 741 dev/dk motor hızında 1353 W ve 16.11 Nm olarak elde edilmiştir. Anahtar kelimeler: Stirling motoru, Rhombic hareket mekanizması, Rejeneratör, Güç, Moment.
560
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Effect of Regenerator Volume to Engine Performance in A Beta Type Stirling Engine Fatih AKSOY1, Muhammed ARSLAN1,*, Hamit SOLMAZ2, 1
Afyon Kocatepe University, Afyonkarahisar, Turkey 2 Gazi University, Ankara, Turkey *Responsible author e-mail:
[email protected]
Abstract The high prices of fossil-based energy sources and the resulting air pollution and economic crises have led the human being to search for alternative and sustainable energy. These such as nuclear, solar, tide, wind, biomass, geothermal energy sources, etc.. One of the engines that can work with these energy sources and be the solution to the present energy problem is the Stirling engine. The theoretical thermal efficiencies of these externally-burned engines operating according to the Stirling cycle are the same as those of the Carnot cycle under the same temperature conditions. In this paper, a betatype Stirling engine having rhombic drive mechanism with regenerator was manufactured and tested. Two different regenerators which have 60 cm3 (regenerator-I) and 120 cm3 (regenerator-II) regenerator volume were designed to increase efficiency and examine the effects of the regenerator volume on the engine performance. They had %15 porosity ratio, 0.15 mm diameter and stainless steel wires were meshed as a woven straw and used as regenerator material and the effect of regenerator volume to the engine performance was investigated. Also, by bearing the gears from both side on the crankshaft and using helical gears in the rhombic drive mechanism, the reduction of frictional losses, quiet running and increasing of output power were accomplished. The experiments were carried out at different hot end temperatures and charge pressures using helium as working fluid. According to experimental conclusions, maximum engine power and moment were obtained as 1353 W at 1099 rpm and 16.11 Nm at 741 rpm, 800 °C hot end temperature and 5 bar charge pressure using renegerator-I. Key words: Stirling engine, Rhombic drive mechanism, Regenerator, Power, Moment.
561
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
A Sustainable Solution in Aquaculture AQUAPONICS Muhammet Hayati KAYHAN1,*, Ufuk Gürkan YILDIRIM 1, Öznur GÖRMEZ 1, İbrahim DİLER1 1
Süleyman Demirel University, Eğirdir Fisheries Faculty *Responsible author e-mail:
[email protected]
Abstract Aquaculture has a delicate balance between the supply of animal protein claims and the effective use of water resources. For this reason, there is a need for methods to achieve the minimum environmental impact while providing the animal protein needed by the rapidly increasing human population in the world. The earliest modern application of aquaponic cultivation, which was first commissioned in 1150 with the Aztecs, was carried out in the 1970s (1). Aquaponic systems have a great potential for sustainability on agricultural and aquaculture applications in recent years when the environmental consciousness has increased. Key words: Aquaponics, sustainable aquaculture, eco-friendly fish culture.
562
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Kent Parklarının Sürdürülebilirlik Ve Ekolojik Yaklaşım Çerçevesinde Değerlendirilmesi Aslı KORKUT1, Tuğba KİPER1, Muhammet Mustafa ATEŞ2,* 1
Namık Kemal Üniversitesi, Güzel Sanatlar, Tasarım ve MimarlıkFakültesi Peyzaj Mimarlığı Bölümü, Tekirdağ, Türkiye 2 İstanbul Beyoğlu Belediyesi, İstanbul, Türkiye *Sorumlu yazar e-posta:
[email protected]
Özet Kentler, kültürel ve doğal unsurların karşılıklı etkileşimini içeren ekosistemlerdir. Kentsel ekosistemlerde sürdürülebilir dengenin sağlanmasında en önemli bileşen kentsel yeşil alanlardır. Kent parkları ise; kentsel gelişmeyi yönlendirme, doğa ile bütünleşme, kentsel ısı adası etkisini azaltma, biyoklimatik konfor oluşturma gibi kentsel ekosistemin sürdürülebilirliği açısından etkili olan açık ve yeşil alan sisteminin birer parçasıdırlar. Bu noktada sürdürülebilir bir kentsel gelişim için, kent parklarının ekolojik bir planlama ve tasarım yaklaşımıyla ele alınması oldukça önemlidir. Bu kapsamda çalışma; "sürdürülebilir planlama ve tasarım için ekolojik yaklaşım ve farkındalık esastır" öngörüsü çerçevesinde değerlendirilmiştir. Bu amaç kapsamında, Maçka Demokrasi Parkı örneğinde farklı sosyal grup ve cinsiyetteki bireylerin beklenti ve farkındalıkları araştırılmıştır. Çalışma; anket, gözlem ve konu ile ilgili literatürlere dayalı olarak yapılmıştır. Örneklem grubunu Maçka Demokrasi parkını ziyaret eden kişiler oluşturmuştur. Elde edilen veriler; sosyo demografik yapıya ilişkin bulgular, çevresel sürdürülebilirlik yaklaşımına ilişkin bulgular ve park alanının ekolojik tasarım yaklaşımına ilişkin bulgular olmak üzere üç bölümde değerlendirilmiştir. Sonuçlar Microsoft Excel ve SPSS 23 programları kullanılarak frekans ve yüzdelik oranların verildiği çizelge ve şekiller çerçevesinde değerlendirilmiştir. Anahtar kelimeler: Kent, kent parkı, ekolojik yaklaşım, sürdürülebilirlik, Maçka Demokrasi Parkı.
563
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Evaluation of Urban Parks in the Framework of Sustainability and Ecological Approach Aslı KORKUT1,Tuğba KİPER1, Muhammet Mustafa ATEŞ2,* Namık Kemal University, Faculty of Fine Arts, Design and Architecture, Department of Landscape Architecture, Tekirdağ, Turkey 2 Istanbul Beyoglu Municipality, Istanbul, Turkey *Responsible author e-mail:
[email protected]
1
Abstract Cities are ecosystems that involve the interaction of cultural and natural elements. Urban green areas are the most important component in ensuring sustainable equilibrium in urban ecosystems. Urban parks are parts of an open and green space system that is effective in terms of sustainability of urban ecosystems such as orientation of urban development, integration with nature, reduction of urban heat island effect and bioclimatic comfort formation.At this point, it is very important for urban parks to be dealt with an ecological planning and design approach for a sustainable urban development. In this context, the study was evaluated in the framework of the hypothesis "Ecological approach and awareness are essential for sustainable planning and design".Within the scope of this aim, the expectations and awareness of the individuals from different social groups and sexes were investigated in the case of Maçka Demokrasi Park. The research study was conducted based on questionnaires, observations and related literature.The sample group was formed by people visiting Macka Democracy park.The data obtained were evaluated in three parts as findings related to the socio demographic structure, findings related to the environmental sustainability approach and findings related to the ecological design approach of the parking area.The results were evaluated by using Microsoft Excel and SPSS 23 programs in the form of charts and figures where frequency and percentages are shown. Key words: City, urban park, ecological approach, sustainability, Maçka Democracy Park.
564
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Tema Parklarında Sürdürülebilirlik Ve Ekolojik Yaklaşım Açısından Bir Araştırma: Vialand Tema Park Örneği Muhammet Mustafa ATEŞ1,*, Aslı KORKUT2, Tuğba KİPER2 İstanbul Beyoğlu Belediyesi, İstanbul, Türkiye Namık Kemal Üniversitesi, Güzel Sanatlar, Tasarım ve Mimarlık Fakültesi Peyzaj Mimarlığı Bölümü, Tekirdağ, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2
Özet Modernleşme ve hızlı nüfus artışı ile birlikte kentsel yaşam kalitesinde değişim ve dönüşümler meydana gelmiştir. Süreç içerisindeki bu değişimlerin yarattığı çevresel ve sosyal sorunlar, yeni kentsel planlama ve tasarım yaklaşımlarının geliştirilmesine neden olmuştur. Bu noktada kent planlama ve tasarımında ekolojik boyutu ve sürdürülebilirliği esas alan yaklaşımlar önem kazanmıştır. Sürdürülebilirlik ve ekoloji odaklı yaklaşımlarla kent içerisinde yer alan farklı nitelikteki açık ve yeşil alanlara özgü çeşitli çözüm önerileri getirilmektedir. Bu çalışmada; Vialand Tema Park özelinde sürdürülebilirlik ve ekolojik yaklaşımların önemi, gerekliliği ve uygulanabilirliliği irdelenmektedir. Çalışmada; anket, gözlem ve konu ile ilgili literatürlere dayalı olarak yapılan araştırmalarla ” Tema Parkları, kentsel yaşamın sürekliliği için ekolojik açıdan nasıl kurgulanmalıdır? ” sorusuna yanıt aranmaktadır. Bu amaçla; farklı sosyal grup ve cinsiyetteki bireylerden oluşan Vialand Tema Parkı ziyaretçilerinin görüş ve beklentileri araştırılmıştır. Araştırma, 200 kişi ile tamamen tesadüfi bir yöntemle yürütülmüştür. Elde edilen sonuçlar üç ayrı bölüm halinde çizelge ve grafiklerle analiz edilerek değerlendirilmiştir. Anahtar kelimeler: Kent, tema park, ekolojik yaklaşım, sürdürülebilirlik.
565
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
A Survey on Sustainability and Ecological Approach in Theme Parks: The Case of VialandTheme Park Muhammet Mustafa ATEŞ1,*, Aslı KORKUT2, Tuğba KİPER2 1
Istanbul Beyoglu Municipality, Istanbul, Turkey Namık Kemal University, Faculty of Fine Arts, Design and Architecture, Department of Landscape Architecture, Tekirdağ, Turkey *Responsible author e-mail:
[email protected]
2
Abstract Along with modernization and rapid population growth, changes and transformations in the quality of urban life have occured. The environmental and social problems created by these changes in the process have led to the development of new urban planning and design approaches. At this point, approaches based on ecological dimension and sustainability in urban planning and designhave gained importance. With sustainability and ecology-oriented approaches, various solutions that are specific to open and green areas of different qualities in the city are introduced. In this study, the importance, necessity and applicability of sustainability and ecological approaches to Vialand Theme Park are discussed. The study seeks answer for the question "How should theme parks be planed ecologically for the continuity of urban life?” with the researchbased on questionnaires, observations and literature on the subject. For this purpose, the views and expectations of Vialand Tema Park visitors consisting of different social group and gendered individualswere investigated. The research was conducted with 200 people in a completely random way. The results were evaluatedas three separate sections with charts and graphs analyzes. Key words: City, theme park, ecological approach, sustainability.
566
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürdürülebilir Kalkınma Çerçevesinde Çevre Ekonomisi ve Çevre Etiği İlişkisi Melike DOĞAN1,*, Destan SEÇME1, Murat AKTEN1 Süleyman Demirel Üniversitesi Mimarlık Fakültesi, Peyzaj Mimarlığı Bölümü, Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected]
1
Özet Çevre ekonomisinin dışsal maliyetleri oldukça yüksektir. Özellikle sanayileşme ve teknolojik gelişmeler ile birlikte üretimin ve tüketimin hızla artması sonucu; hava, su ve toprak hızla kirlenmeye, doğal kaynaklar tükenmeye başlamış, doğanın kendi kendini yenileme niteliği zarar görmüştür. Gelişmekte olan ülkelerin temel hedefi kalkınmadır ancak çevre politikaları uygulayarak bu hedefi tehlikeye atmaktan ve yabancı sermayeyi kaçırmaktan korkmaktadırlar. Bu durum, kirli endüstrilerin gelişmiş ülkelerden gelişmekte olan ülkelere kaymasına neden olmaktadır. Bu çalışmada, sürdürülebilir kalkınma bağlamında, antroposentrikantroposentrik olmayan etik tartışmaların eleştirel bir analizi sunulmaktadır. Geleneksel olarak, insan merkezli kimseler, doğanın bazı özelliklerinin insanlar için ne kadar kullanışlı olduğu yönünde, çevreyi araçsal olarak değerlendirecek kişiler olarak kabul edilir. Buna karşılık, antroposentrikler doğayı içsel olarak kendi başına değer verirler. Bu bildiride, etik değerin böylesine basit bir ikili model temsilinin çok belirsiz olduğu için eleştirilmektedir. Bunun yerine, çevresel değerin nesnesi, değerin doğası, değer kaynağı, değer teorisi ve değer niteliği olan ahlaki değerin beş boyutunu inceleyerek, sürdürülebilir kalkınmanın kavramını ve uygulanmasını tam olarak ele alacak mantıksal olarak tutarlı bir çevresel etik kümesi oluşturmak mümkündür. Sonuç olarak, sürdürülebilir kalkınma farklı insanlara farklı şeyler ifade etmektedir. Bazılarına göre, sürdürülebilir kalkınmanın özü, parasal patlama ve iflas döngülerinin önlendiği sürekli ekonomik büyümedir. Teknolojik ilerlemeler doğal kaynakların tüketimine ayak uydurduğu sürece, gelecek nesillerin kendine kıyasla eşit ya da daha iyi bir yaşam standardı yaşayabileceğinden emin olabilirken başkalarına göre ise, sürdürülebilir bir toplum, yeryüzünün değiştirilemeyen yönlerini koruyarak büyümeyi arttırmak için yenilenebilir kaynaklara yönelmelidir. Büyüme, temel bir yaşam ihtiyacı olarak devam etmeli, ancak gelecek kuşaklar ve yaşadıkları çevre pahasına olmamalıdır. Anahtar kelimeler: Sürdürülebilir kalkınma, Çevre ekonomisi, Çevre etiği.
567
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Environmental Economy and Environmental Ethics in the Framework of Sustainable Development Melike DOĞAN1,*, Destan SEÇME1, Murat AKTEN1 Süleyman Demirel University Architecture Faculty, Departments of Landscape Architecture, Isparta, Turkey *Responsible author e-mail:
[email protected]
1
Abstract The external costs of environmental economics are very high. As a result of the increase in production and consumption especially with industrial and technological developments, air, water and soil started to pollute, natural resources started to be exhausted and the automatic renewal characteristic of nature has been damaged. The basic aim of developing countries is to develop. However, they are afraid of risking this aim with the application of environmental policies and frightening the foreign investment. As a result, this causes the transfer of dirty industries from developed countries to developing countries. This paper presents a critical analysis of the anthropocentric-nonanthropocentric ethical debate in the context of sustainable development. Traditionally, anthropocentrics are regarded as those who value the environment instrumentally, for the usefulness which certain features of nature have for humans. By contrast, nonanthropocentrics value nature intrinsically, in its own right. In this paper, such a simple bi-modal representation of ethical value is criticized for being too vague. Instead, by examining five dimensions of ethical value, the object of environmental value, the nature of value, the source of value, the theory of value and the attribution of value, it is possible to construct a logically coherent set of environmental ethics which can fully address the concept and implementation of sustainable development. Consequently, sustainable development means different things to different people. To some, the essence of sustainable development is sustained economic growth, where cycles of monetary boom and bust are avoided. So long as technological advances keep pace with consumption of natural resources, we may feel assured that future generations will be able to experience an equal or improved standard of living compared to our own. To others, a sustainable society must turn to renewable resources to enhance growth, whilst protecting those aspects of the environment that cannot be replaced. Growth should continue, as a basic need of life, but not at the expense of future generations and the environment they inhabit. Key words: Sustainable development, Environmental economics, Environmental ethics.
568
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
GRI Raporlama Çerçevesinde Hazırlanan Sürdürülebilirlik Raporlarında Açıklanan Performans Göstergeleri ve BİST’de İşlem Gören Şirketlere İlişkin Bir Uygulama Saime ÖNCE1, Murat DÜZER2,* Anadolu Üniversitesi, Eskişehir, Türkiye Bilecik Şeyh Edebali Üniversitesi, Bilecik, Türkiye *e-posta:
[email protected] 1
2
Özet Sürdürülebilir kalkınma hedefinin gerçekleşebilmesinde önemli bir yere sahip olan işletmeler; hesap verebilirlik anlayışı çerçevesinde sürdürülebilirlik raporlarında faaliyetlerinin ekonomik, çevresel ve sosyal etki ve sonuçları hakkında bilgi vermektedirler. Bu çalışmanın amacı, şirketlerin sürdürülebilir performans göstergelerine ilişkin yaptıkları açıklamaların araştırılmasıdır. Bu amaçla çalışmaya; Borsa İstanbul’da hisseleri işlem gören şirketlerden GRI(Küresel Raporlama Girişimi) raporlama çerçevelerine göre sürdürülebilirlik raporu hazırlayan 25 şirket dahil edilmiştir. Çalışma kapsamına giren şirketlerin sürdürülebilirlik raporlarında yer alan ekonomik, çevresel ve sosyal performans göstergelerine ilişkin açıklamaları içerik analizi yöntemiyle incelenmiştir. Ayrıca şirketlerin ekonomik, çevresel ve sosyal performans göstergelerine ilişkin açıkladıkları bilgi düzeyinin; sektör, şirket boyutu, şirket yaşı ve sahiplik yapısı değişkenlerine göre farklılık gösterip göstermediği araştırılmıştır. Çalışmanın sonuçlarına göre; şirketler sürdürülebilirlik raporlarında en çok, ürettikleri ve dağıttıkları ekonomik değere ilişkin bilgi veren EC1 ekonomik performans göstergesiyle ilgili açıklamada bulunmuşlardır. Bununla birlikte şirketler, en az açıklamayı ise ulusal koruma listesindeki canlı türlerinin sayısına ilişkin bilgi veren EN15 çevresel performans göstergesi hakkında yapmışlardır. Ayrıca şirketlerin sürdürülebilirlik performans göstergelerine ilişkin açıkladıkları bilgi düzeyinin sektöre, şirket boyutuna ve şirket yaşına göre istatistiki olarak anlamlı farklılıklar göstermediği; sahiplik yapısının durumuna göre istatistiki olarak anlamlı farklılıklar içerdiği görülmüştür. Çalışmanın sonuçları şirketlerin, sürdürülebilirlik raporlarında özellikle ürettikleri katma değer hakkında açıklama yapma eğiliminde olduklarını; daha spesifik performans göstergelerine ilişkin ise nadiren açıklama yaptıklarını göstermiştir. Ayrıca şirketlerin sürdürülebilirlik performans göstergelerine ilişkin açıkladıkları bilgi düzeyinin sektöre, şirket boyutuna ve şirket yaşına göre benzer özellikler göstermesi sonucunun, GRI raporlama çerçevelerine göre sürdürülebilirlik raporu hazırlayan şirketlerin sürdürülebilirlik raporlarında açıkladıkları bilgilerin karşılaştırılabilmesine olanak sağlayacağı düşünülebilir. Anahtar kelimeler: GRI(Küresel Raporlama Girişimi), Sürdürülebilirlik Raporu, Performans Göstergeleri ve BİST.
569
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Performance Indicators Explained in the Sustainability Reports Prepared in the GRI Reporting Framework and a Practice Related to the Companies Acted in Istanbul Stock Exchange Saime ONCE1, Murat DUZER2,* 1
2
Anadolu University, Eskisehir, Turkey Bilecik Seyh Edebali University, Bilecik, Turkey * e-posta:
[email protected]
Abstract Enterprises that have an important place in the realization of the sustainable development goal explain economic, environmental and social impacts and results of their activities in sustainability reports within the framework of accountability. The purpose of this study is to investigate the explanations of companies about sustainable performance indicators. For this purpose; 25 companies that have prepared their sustainability report according to GRI (Global Reporting Initiative) reporting frameworks from companies whose stocks are traded in Stock Exchange Istanbul have been included. Explanations of the economic, environmental and social performance indicators included in the sustainability reports of the companies included in the study were analyzed by means of content analysis. In addition in this study, were analyzed the level of knowledge that companies explain about economic, environmental and social performance indicators; whether differ by sector, company size, company age and ownership structure. According to the results of the study; Companies have made the most of the EC1 economic performance indicator that provided information on the economic value they produced and distributed in their sustainability reports. However, companies have made the least disclosures about the EN15 environmental performance indicator, which provides information on the number of species on the national protection list. In addition, the level of knowledge that companies have expressed about sustainability performance indicators does not show any significant difference statistically by sector, company size and company age; Statistically significant differences were found according to the status of ownership structure. The results of the study show that companies tend to disclosure the added value they generate particularly in sustainability reports while they rarely disclosure on more specific performance indicators. It is also possible that the level of knowledge expressed by companies regarding their sustainability performance indicators is similar to that of the sector, company size, and company age, and it may be possible to compare the information provided by sustainability reports by companies that prepare a sustainability report based on GRI reporting frameworks. Key words: GRI(Global Reporting Initiative), sustainability report, performance indicator, Istanbul Stock Exchange.
570
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Irrigation Purposed Dam As A Source Of Small Hydropower In Afyonkarahisar. (Case Study: Yavaslar Dam) Murat KİLİT1,*, Uğur Ş. CAVUS 2, Kemal SAPLIOĞLU 3 1
Afyon Kocatepe University, Engineering Faculty, Civil Engineering Department,Afyonkarahisar 2 Suleyman Demirel University ,Technology Faculty, Civil Engineering Department, Isparta 2 Suleyman Demirel University , Engineering Faculty, Civil Engineering Department, Isparta *Responsible author e-mail:
[email protected]
Abstract The electricity demand of Turkey is growing rapidly since Turkey is a socially and economically developing country. 22% of the world’s electricity production comes from hydropower installations, many of which are small hydropower (SHP) plants. Dams are engineering structures that store water to supply needs of human and living beings. Although the average annual inflow is greater than the annual irrigation release, there is a contradiction in monthly inflow and irrigation demand patterns, which is drastically pronounced in semi-arid regions like Turkey. In Turkey, energy cost increase considerably in recent decades, the addition of a suitable capacity small hydropower plant (SHP) will be added at the end of the conduit of an existing irrigation dam may be feasible. In this study, available water potential of the Yavaslar Dam’s watershed will be calculated using meteorological and river run off data which will be obtained DMI and DSİ observation stations. Hydroelectrically energy production capacity of the Yavaslar dam which was constructed only for irrigation and domestic water supply will be investigated. Required water and energy production amount will be calculated if a mini hydropower plant is constructed in the bottom outlet of the dam. Therefore, the water amount discharged from the Yavaslar dam spillway structure will be calculated to use it for the energy production. Key words: Hydropower, Yavaslar Dam, Dam Operation, Renewable Energy.
571
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Capacity of Ngos and Their Impact On Local Development In Isparta Emrah AYHAN1,*, Murat ÖNDER2 Ankara Yıldırım Beyazıt University, Ankara, Turkey Ankara Yıldırım Beyazıt University, Ankara, Turkey *Responsible author e-mail:
[email protected] 1
2
Abstract The emergence of civil society in Turkey in a modern sense occurred parallel to developments in the world during 1980s. Because Turkey has integrated to the world politically, socially and economically due to new reforms in these years established by Turgut Özal. In this sense, Turkey has increasingly been affected from the developments in the world compared to past. Since then civil society has become a significant actor effective in social, political and economic areas. Especially, “governance” approach, which increases its influence each day, has placed civil society as third sector which can cooperate and collaborate with the public sector. Moreover, new approaches, which emerged to establish more effective public administration, expect to decrease the role of the state in economic and social areas. They also argue that new actors like private sector and civil society should get more tasks in providing effective public goods and services. In this direction, the capacity of Non-Governmental Organizations (NGOs) has become an important issue. Therefore, the aim of this research is evaluating the capacity of local NGOs and their impact on local development, because they are more familiar with socio-economic and political characteristics of their region so they have become more significant actors in the creation and execution of regional development policies. However, there are different factors affecting the capacity of NGOs and their influence on local development. These factors were determined through the investigation of statistical data gathered from official institutions and the results of literature review from primary and secondary sources. After that they are discussed by Civil Society Index (CSI) and SWOT (Strengths-Weaknesses-Opportunities-Threats) analysis in the case of Isparta, Turkey. Key words: NGO capacity, governance, local development, nonprofit sector, Isparta.
572
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Isparta’daki STK’ların Kapasitesi ve Yerel Kalkınma Üzerindeki Etkileri Emrah AYHAN1,*, Murat ÖNDER2 Ankara Yıldırım Beyazıt Üniversitesi, Ankara, Türkiye Ankara Yıldırım Beyazıt Üniversitesi, Ankara, Türkiye *Sorumlu yazar e-posta:
[email protected]
1 2
Özet Türkiye’de modern anlamda sivil toplumun ortaya çıkışı, 1980’lerde dünyada meydana gelen gelişmelere paralel olarak gerçekleşmiştir. Çünkü bu yıllarda, Turgut Özal’ın başlattığı reformlar sonucunda Türkiye ekonomik, siyasal ve toplumsal olarak dünya ile bütünleşmeye başlamıştır. Bu nedenle Türkiye dünyada meydana gelen gelişmelerden eskiye göre daha çok etkilenmeye başlamıştır. Bu yıllarda gelişmeye başlayan sivil toplum, günümüze kadar siyasal, toplumsal ve ekonomik alanlarda etkili olan bir aktör haline gelmiştir. Günümüzde giderek etkisini arttıran yönetişim yaklaşımı, sivil toplumu kamu sektörüyle partnerlik yapabilen üçüncü bir sektör (third sector) olarak gündeme getirmiştir. Ayrıca kamu yönetiminin etkinleştirilmesine yönelik ortaya çıkan yeni yaklaşımlar devletin ekonomik ve sosyal alanlardaki otoritesinin kısıtlanmasını beklemektedirler. Bu yaklaşımlar, kamu ürün ve hizmetlerinin daha etkili sunulması için özel sektör ve sivil toplumun daha çok yetki alması gerektiğini tartışmaktadırlar. Bunun sonucunda, sivil toplum kuruluşlarının kapasitelerinin yeterli olup olmadığı konusu önem kazanmıştır. Bu yüzden çalışmanın amacı, Türkiye’de yerel düzeyde aktif olan STK’ların kapasitelerini ve yerel kalkınma üzerindeki etkilerinin araştırılmasıdır. Çünkü yerel STK’lar bulundukları bölgelerin kendine özgü sosyo-ekonomik ve siyasal özelliklerini bildikleri için bölgesel kalkınma politikalarının belirlenmesinde ve uygulanmasında etkili roller üstlenmektedirler. Ancak STK’ların yerel kalkınma üzerindeki etkilerini ve kapasitelerini etkileyen çeşitli faktörler bulunmaktadır. Bu faktörler, birincil ve ikincil kaynaklardan yapılan literatür taraması sonuçları ve resmî kurumlardan elde edilen istatistiki veriler ışığında belirlenmiştir. Daha sonra, bu faktörler Sivil Toplum Endeksi (STE) ve FTÜZ (Fırsatlar, Tehditler, Üstünlükler ve Zayıflıklar) analizi yöntemleri ile Isparta örneği üzerinden tartışılmıştır. Anahtar kelimeler: STK kapasitesi, yönetişim, yerel kalkınma, kâr amacı gütmeyen sektör, Isparta.
573
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Kültür ve Bölgesel Kalkınma Emrah AYHAN1,*, Murat ÖNDER2 Ankara Yıldırım Beyazıt Üniversitesi, Ankara, Türkiye Ankara Yıldırım Beyazıt Üniversitesi, Ankara, Türkiye *Sorumlu yazar e-posta:
[email protected]
1 2
Özet Bölgeler arası sosyo-ekonomik farklılıkları ortadan kaldırabilen ülkeler ulusal kalkınmada daha başarılı olmaktadırlar. Bu nedenle, Türkiye bu farklılıkları ortadan kaldırmak için dönemsel olarak bölgesel kalkınma politikaları üretmektedir. Bu politikalar dünyadaki gelişmelere paralel olarak zamanla değişmekte ve gelişmektedir. Bölgesel kalkınma politikalarının başarısını ya da başarısızlığını hangi faktörlerin etkilediği ile ilgili birçok çalışma yapılmıştır. Yapılan bilimsel çalışmalar, kültür ile kalkınma arasında güçlü bir ilişki olduğunu göstermiştir. Bu nedenle, Türkiye’de hâkim olan ulusal kültürün kalkınma ile ilişkisinin detaylı olarak incelenmesi gerekmektedir. Bu çalışmanın amacı, Türkiye’deki kültürel dönüşümler ile bölgesel kalkınma politikalarındaki anlayış değişiklikleri karşılaştırmalı olarak tartışmaktır. Toplumsal inanç ve değerler (başkalarına karşı güven ve saygı vb.) ile bireylerin özgür iradeye yaklaşımlarını kültürün en önemli göstergeleri olarak düşünebiliriz. Çünkü bu göstergeler, sadece bireylerin birbirine ve devlete karşı değil aynı zamanda devletin bireylere karşı tutum ve davranışlarını belirlerler. Bu göstergelerin tarihsel dönüşümlerini anlamak için; tarihsel kırılmalar, okuma-yazma oranları, siyasal ve bürokratik kurumların oluşum ve işleyiş süreçleri gibi bağımsız değişkenlerin incelenmesi gerekmektedir. Böylece kültürün kalkınma üzerindeki etkileri daha iyi belirlenebilir. Bu çalışmada, birincil ve ikincil kaynaklar ışığında yapılan literatür taraması sonuçları ve resmî kurumlardan elde edilen istatistiki veriler çalışmanın temel kaynakları olarak kullanılmıştır. Buna ek olarak, kültürüm kalkınma üzerindeki etkisini anlayabilmek için kültürün temel öğeleri esas alınarak mülakat soruları hazırlanmıştır. Mülakat yapılanlar, kalkınma konusunda uzman ya da yönetici pozisyonunda bulunan kişilerden seçilmiştir. Anahtar kelimeler: Kültür, siyasal ve bürokratik kurumlar, bölgesel farklılıklar, bölgesel kalkınma, Türkiye.
574
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Culture and Regional Development Emrah AYHAN1,*, Murat ÖNDER2 Ankara Yıldırım Beyazıt University, Ankara, Turkey Ankara Yıldırım Beyazıt University, Ankara, Turkey *Responsible author e-mail:
[email protected] 1
2
Abstract Countries, which eliminate regional socio-economic disparities, are more successful in national development. Therefore, Turkey produces new regional development policies to eliminate these disparities. These policies are changing and improving depending on the developments in the world. There are many studies investigating factors influencing success or failure of these policies. However, the influence of culture on development underemphasized. In the literature, there are many arguments whether there is a significant relation between culture and development. Therefore, it is necessary to discuss the relations between national culture and development in Turkey. The aim of this study is to establish a comparative analysis of cultural transformation and changing understanding within regional development policies. We can consider social beliefs, values (trusting and respecting) and attitude on individual freedom are the most important indicators of culture. Because these indicators do not only determine attitude of individuals on other individuals or state, they also determine the attitude of the state on individuals. In order to understand historical transformation of these indicators, it is necessary to investigate some independent variables such as historical breakings, literacy rate, the creation and operation of political and processes. Thus, we can find out the influence of culture on development in detail. The main sources of the study are statistical data gathered from official institutions and the results of literature review from primary and secondary sources. In addition, the impact of culture on regional development is evaluated through interview questions in the light of main elements of culture. Persons interviewed are chosen from the ones who are expert or work in an administrative position related to development. Key words: Culture, political and administrative institutions, regional disparities, regional development, Turkey.
575
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Bir Gıda Fabrikasında Enerji Performans Değerlendirmesi Selmin ENER RUSEN 1,3,*, Musab Selahaddin ÇEVİK 2,3 Karamanoğlu Mehmetbey Üniversitesi, Enerji Sistemleri Mühendisliği Bölümü, Karaman,Türkiye Karamanoğlu Mehmetbey Üniversitesi, Fen Blimleri Fakültesi, İleri Teknolojiler, Karaman,Türkiye 3 Academic Enerji Araştırma Grubu (AKEN), Karamanoğlu Mehmetbey Üniversitesi, Karaman, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2
Özet Bu çalışmada, öncelikle sanayi sektöründe enerji tasarrufu ve enerji verimliliğini artırmaya yönelik çözüm yolları araştırılmıştır. Ayrıca, Karaman bölgesinde yoğunlukla gıda üretimi alanında faaliyet gösteren firmalar arasında seçilen bir gıda işletmesinin gofret üretim hattında detaylı ölçümler yapılarak enerji verimliliği çalışmaları yapılmıştır. İşletmede enerji verimliliğin sağlanması ve sürekli olabilmesi için mevcut durum verileri kullanılarak tasarruf potansiyeli ve performans durumu analiz edilmiştir. Çalışma sonunda çevreye verilen CO2 salınımı hesaplanmıştır. Ayrıca, bu vaka çalışmasında, gıda üretim endüstrisinde tüketilen enerjinin tasarruf potansiyelinin ülkemiz ekonomisine katkısı ve önemi tartışılmıştır. Elde edilen ön sonuçlar enerji verimliliğinin iyileştirilmesine ilişkin daha ileri çalışmalar için cesaret vericidir. Teşekkür: Karamanoğlu Mehmetbey Üniversitesi'ne verdiği destekler için teşekkür ederiz (Proje No: BAP-06 YL-16 ve MEVKA TR52 / 15 / YNRKG1 / 0013). Anahtar kelimeler: Enerji Verimliliği, Gıda Fabrikası, Enerji ve Ölçüm, Karaman.
576
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Evaluation of Energy Performance at a Food Factory Selmin ENER RUSEN 1,3,*, Musab Selahaddin ÇEVİK 2,3 1
Karamanoglu Mehmetbey University, Department of Energy Systems Engineering, Karaman, Turkey Karamanoglu Mehmetbey University, Faculty of Science, Department of Advanced Technologies, Karaman, Turkey 3 Academic Energy Research Group (AKEN), Karamanoglu Mehmetbey University, Karaman, Turkey *Responsible authors e-mail:
[email protected] 2
Abstract In this study, firstly solutions for energy-saving and energy efficiency in the industrial sector were investigated. In addition, energy efficiency studies have been carried out by making detailed measurements on the wafer production line of a selected food factory among companies operating in the area of food production in the Karaman. In order to ensure energy efficiency and sustainability at a food factory, the saving potential and performance status were analyzed for the current situation. At the end of the study, the CO2 emissions given to the environment were calculated. Furthermore, in this case study has also discussed the importance and contribution of the saving potential of the consumed energy in the food production industry to the economy of our country. Obtained preliminary results are encouraging for the further studies on the improvement of the energy efficiency. Acknowledgement: We also would like to express their gratitude to Karamanoglu Mehmetbey University for supports (Grand No: BAP-06-YL-16 and MEVKA, TR52/15/YNRKG1/0013). Key words: Energy Efficiency, Food Factory, Energy and Measurement, Karaman.
577
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Gençlik Refahı Politikalarının Sürdürülebilirliğinin Değerlendirilmesi Mustafa Çağrı AYALP1,*, Edip AYGÜLER2 Hacettepe Üniversitesi, Sosyal Hizmet Bölümü, Ankara, Türkiye Hacettepe Üniversitesi, Sosyal Hizmet Bölümü, Ankara, Türkiye *Sorumlu yazar e-posta:
[email protected]
1 2
Özet Gençlik için biyolojik bir tanım yapılamamakla birlikte, belirli bir yaş sınırı da konulamamaktadır. Her genç nüfus grubu, ait olduğu toplumun kültürel, sosyal ve hukuki normlarına göre tanımlanabildiğinden; gençlik daha çok sosyolojik bir kavramdır. Giderek artan dünya nüfusunun içinde, gençler önemli bir yer tutmaktadır. Birleşmiş Milletlerin yayımladığı Gençlik Raporuna göre, dünya genelinde 1.2 milyar genç bulunmaktadır. Dünya nüfusunun yaklaşık %15’inin gençlerden oluştuğu düşünüldüğünde bu kadar geniş bir nüfusun çok çeşitli sorunlarının var olduğu yadsınamaz. Gençlerin günlük hayatta karşılaştıkları sorunları daha çok ekonomik, kültürel ve sosyal olarak sınıflandırmak mümkündür. Toplumun geleceği olarak görülen gençlerin yaşadıkları özellikle eğitim, barınma, katılım ve istihdam gibi problemlerin çözümlenemediği durumlarda, bu sorunların başka sorunlara evrilmesi veya kronikleşmesi söz konusudur. Bu açıdan bireylerin hayatlarını etkileyerek işlevselliklerini ve iyilik hallerini artırmalarını amaçlayan, sosyal politikalara ihtiyaç duyulmaktadır. İşsizlik, sosyal güvenlik sorunları, sağlık hizmetlerinden yararlanamama ve toplumsal ve siyasal hayata katılım sağlayamama gibi önemli sorunların giderilmesi, kısa vadede gençlerin; uzun vadede ise geleceğin yetişkinlerinin yararına olacaktır. Ülkemizin genç bir nüfusa sahip olduğu bilinmektedir. Gençlerin dinamik yapısının politika ve uygulamalarla doğru şekilde yönlendirilmesi ve gençlik refahının artırılması gerekmektedir. Bu çalışma da var olan politika ve hizmetlerin, istatistikler ve göstergeler ışığında söz konusu hedef grubunun refahını artırmada ne kadar etkili olduğu, sonuçları ne derece etkilediği ve daha etkin politika ve hizmetlerin geliştirilmesi için nelerin yapılabileceği tartışılacaktır. Anahtar kelimeler: Gençlik, Gençlik refahı, Sosyal politika, Sosyal hizmet.
578
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Evaluation of Sustainability of Youth Welfare Policies Mustafa Çağrı AYALP1,*, Edip AYGÜLER 2 1 2
Hacettepe University, Department of Social Work, Ankara, Turkey Hacettepe University, Department of Social Work, Ankara, Turkey *Responsible author e-mail:
[email protected]
Abstract With no biological definition for youth, a specific age limit can not be set. Since each of the youth population group can be defined according to the cultural, social and legal norms of the society to which it belongs, youth is more of a sociological concept. In ever increasing world population, young population has an important place. According to the United Nations' Youth Report, there are 1.2 billion young people worldwide. When it is thought that about 15% of the world's population is comprised of young people it can not be denied that there are a wide variety of problems with such a large population. It is possible to classify the problems faced by young people in daily life more as economically, culturally and socially. In the situations where young people, who are seen as the future of society, experience problems such as education, sheltering, participation and employment that can not be solved, these problems are about to evolve or become chronic. In this respect, there is a need for social policy that aims to increase the functionalities and well-being of individuals by affecting their lives. The elimination of important problems such as unemployment, social security problems, inability to benefit from health services, and inability to participate in social and political life, will benefit present young people in short term and in the long term the future adults. It is known that our country has a young population. The dynamic structure of young people needs to be guided to right way by social policies and practices and youth welfare should be increased. This study will discuss how effective policies and services are in increasing the prosperity of the target group in the light of statistics and indicators, how it affects the results and what can be done to develop more effective policies and services. Key words: Youth, Youth welfare, Social policy, Social work.
579
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Ekonomik Bağımsızlığın Sürdürülebilmesi Açısından SYDV Yardımlarının İncelenmesi Mustafa Çağrı AYALP1,*, Edip AYGÜLER2 Hacettepe Üniversitesi, Sosyal Hizmet Bölümü, Ankara, Türkiye Hacettepe Üniversitesi, Sosyal Hizmet Bölümü, Ankara, Türkiye *Sorumlu yazar e-posta:
[email protected]
1 2
Özet Sosyal Yardımlaşma ve Dayanışma Vakıfları (SYDV) 29.5.1986 tarihinde çıkarılan 3294 sayılı Sosyal Yardımlaşma ve Dayanışmayı Teşvik Kanunu'na dayanarak, Aile ve Sosyal Politikalar Bakanlığı bünyesindeki Sosyal Yardımlar Genel Müdürlüğü’ne bağlı olarak oluşturulmuşlardır. Kısa sürede her il ve ilçede, illerde valilerin, ilçelerde ise kaymakamların başkanlığında bu vakıfların teşkilatlanması sağlanmış, günümüzde vakıf sayısı 1000’e ulaşmıştır (ASPB: 2017). Sosyal Yardımlaşma ve Dayanışma Vakıfları 3294 sayılı kanunun 7. maddesinde belirtildiği üzere yoksulluğu önleme amacına uygun faaliyet ve çalışmalar yapmak ve ihtiyaç sahibi vatandaşlara genelde nakdî ve nadir de olsa aynî yardımda bulunmak üzere kurulmuşlardır. Vakıflar vatandaşlara aile, eğitim, sağlık, yaşlı-engelli ve özel amaçlı yardım kategorileri altında çeşitli yardımlar sunmaktadır. ASPB 2016 yılı Faaliyet Raporu verilerine göre ülke genelindeki tüm SYDV’ler tarafından 2016 yılında 656.509 haneye 287,23 milyon TL tutarında Gıda Yardımı, 21.897 haneye 72,76 milyon TL tutarında Barınma Yardımı, 1.175.124 kişiye 512 milyon tutarında Doğum Yardımı ve 289.987 eşi vefat emiş kadına 810 milyon TL tutarında yardım yapıldığı görülmektedir. 86.633 öğrenci için 16,67 milyon TL tutarında eğitim materyali yardımı, 2.132.741 milyon öğrenciye 605,77 milyon TL değerinde Şartlı Eğitim Yardımı, 460 milyon TL tutarında öğle yemeği yardımı yapılmıştır. 2022 sayılı kanun kapsamında 1.335.451 kişiye, 4,76 milyar TL tutarında kaynak aktarımı yapılmıştır. Evde Bakım Aylığı kapsamında 481.141 kişiye 5,198 milyar TL tutarında ödeme yapılmıştır. Sosyal Güvenlik Kurumu’na 7 milyar TL tutarında Genel Sağlık Sigortası (GSS) primi ödenmiştir (ASPB: 2017). ASPB verilerine göre 2013 yılında 2.258.734 haneye 20,764 milyar TL tutarında, 2014 yılında 3.005.898 haneye 20,393 milyar TL tutarında, 2015 yılında 3.017.969 haneye 25,828 milyar TL ve 2016 yılında ise 3.154.946 haneye 32 milyar TL tutarında sosyal yardım yapılmıştır (ASPB: 2014, 2015, 2016, 2017). Sosyal yardımlar, Anayasası’nda sosyal devlet olduğunu deklare eden Türkiye Cumhuriyeti tarafından verilmesi zorunlu olan yardımlar olmakla birlikte geçicilik esasına dayanması gereken yardımlardır. Sosyal yardım bireyin veya hanenin yaşamında hastalık, işsizlik, engellilik, afet gibi olağandışı bir unsurun ortaya çıkması durumunda verilmesi gereken yardımlar olmalı, kişi ya da hanenin kriz durumunu atlatıp, kriz öncesi koşullarına geri dönmesine kadar olan sürede verilmelidir.
580
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Ülkemizdeki SYDV özelindeki sosyal yardım sistemi ve mevcut uygulamalar ise kişi veya aileyi yoksulluk sorunun köküne inmeden, sorununu temelden çözmeden ele almaktadır. Kişiyi veya aileyi sosyal yardıma bağımlı kılmaktadır. Olağandışı durumlardan kaynaklanan ya da doğuştan gelen yoksulluk sorununun kronikleşmesine neden olmaktadır. Kişiyi veya aileyi kendi ekonomik bağımsızlıklarını tekrardan sürdürebilecekleri şekilde desteklememektedir. Nitekim ASPB verileri bu savı doğrulamaktadır. Sosyal yardımlara ayrılan kaynağın ve yardımlardan yararlanan aile sayısının yıldan yıla düzenli olarak sürekli artması mevcut politika ve uygulamaların kişinin kendi ekonomik bağımsızlığını gerçekleştirmesini sağlayacak ve onu sürdürebilecek şekilde değiştirilmesi gerektiğini göstermektedir. Anahtar kelimeler: Sosyal yardım, yoksulluk, SYDV, Sosyal hizmet, Sürdürülebilirlik.
581
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Analysis of SYDV’s Social Fee in Terms of Sustainability Economic Independence Mustafa Çağrı AYALP1,*, Edip AYGÜLER2 1 2
Hacettepe University, Department of Social Work, Ankara, Türkiye Hacettepe University, Department of Social Work, Ankara, Türkiye *Responsible author e-mail:
[email protected]
Abstract Social Assistance and Solidarity Foundations (SYDV) are established by the Law No. 3294, “Encouragement of Social Assistance and Solidarity Act”, issued on 29.5.1986, and now it is affiliated to the General Directorate of Social Assistance within the Ministry of Family and Social Policy. In a short time, in every province and district, in presidency of governors of provinces and governors of districts, organisation of those foundations are provided; and today the number of these foundations has reached 1000 (ASPB, 2017). Social Assistance and Solidarity Foundations have been established to carry out appropriate activities for the purpose of preventing poverty and providing generally in-cash and rarely in-kind assistance to needy citizens as outlined in Article 7 of Law no. 3294. The Foundations are provide citizens with a variety of assistances under the categories of family, education, health, elderly – disabled and special-purpose assistances. According to the data of the Ministry of Family and Social Policies (MFSP), 656,509 households received food aid amounting to 287,23 million Turkish Liras, 21,977 households received Shelter Aid worth 72,76 million TL, 1,125,144 persons received Maternity Grant amounting to 512 million Turkish Liras and 289,987 widowed women received aid amounting to 810 million TLs. 16.67 million TL of training material aid for 86.633 students, 2.132.741 million students received Conditional Education Assistance of 605.77 million TL and lunch aid for 460 million TL. Amount of 4.76 Billion Turkish Lira fund is transferred to 1.335.451 persons within the Law No. 2022. 5.198 Billion Turkish Lira fund is paid to 481.141 persons in scope of Home Care Fee. The General Health Insurance (GSS) premium has been paid to the Social Security Institution amounting to TL 7 billion (ASPB: 2017). According to the ASPB data, social assistance amounting to TL 20,764 billion to 2,258,734 households in 2013, TL 20,393 billion to 3,005,898 households in 2014, TL 25,828 billion to 3,017,969 households in 2015 and TL 32 billion to 3.154,946 households in 2016 ASPB: 2014, 2015, 2016, 2017). Social benefits are obligatory aid that must be given by the Republic of Turkey which declares that it is a social state in its constitution and must be based on the principle of temporaryism. Social assistance should be given in the case of emerging of an unusual element such as illness, unemployment, disability or disaster in the life of
582
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
the individual or the household or it should be given in a period of time to help the individual return to pre-crisis conditions. The social welfare system and existing practices in the context of the SYDV in our country deal with the person or the family without solving their problem in deep and not solving the poverty problem itself. The system makes the individual or the family dependent to the public assistances. It causes chronicity of the problem of poverty originating from unusual situations or innate. It doesn’t support the individual or the family to resume their economical independences. As a matter of fact, ASPB data confirm this argument. The steady increase in the number of families who have received public assistance and the resources allocated for social assistance and benefits indicates that existing policies and practices should be changed to enable one to realize his own economic independence and to sustain it. Key words: Social fee, Poverty, SYDV, Social work, Sustainability.
583
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sentetik Çözeltilerden Kimyasal Koagülasyon-Çöktürme Metoduyla Demir-III Klorür Kullanılarak Bor Giderimi Mustafa KORKMAZ1,*, Elif ÖZMETİN1, Cengiz ÖZMETİN1,Elif ÇALGAN1, Yeliz SÜZEN1, Öznur ZİYANAK1, Leyla KAPLAN1, Emre ERKILINÇ1, Ozan ARICI1, Aytaç TEKEZ1 Balıkesir Üniversitesi, Balıkesir, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
Özet Bor sertleştirici, anti-microbiyal, nötron yakalayıcı, hidrojen tutucu gibi özelliklerinden dolayı endüstrinin birçok alanında kullanılmaya başlanmıştır ve bor canlılar üzerinde olumsuz etkilere sahiptir. Toprakta bor metallerle kompleks oluşturmaktadır ve bu kompleksler metal katyonlarından daha toksiktir. İçme sularında tölere edilebilir bor konsantrasyonu 2.4 mg/L olarak rapor edilmiştir. Bu nedenle borun içme sularından, endüstriyel atık sulardan ve sulama sularından arıtılması gerekmektedir. Bu çalışmada demir-III klorürün (FeCl3) kullanıldığı kimyasal koagülasyon-çökeltme metodu sentetik bor içeren atık sulara uygulanmıştır. Koagülasyon deneyleri Jar testi cihazında yapılmıştır. Jar testi cihazında numuneler önce 2.5 dk hızlı karıştırılmış ve sonrasında 30 dakika yavaş karıştırılmıştır. Bor analizi mannitolün kullanıldığı potansiyometrik titrasyon metodu ile yapılmıştır. pH değerleri bir pH metre yardımı ile %10’ luk HCl veya NaOH çözeltileri ile ayarlanmıştır. Ceketli cam reaktörlerden oluşan flokların çöktürülmesi sonrasında numuneler alınarak işlemler yapılmıştır. Çalışmada konsantrasyon (50–500 mg/L), dozaj (1–10 g/500 mL), ve başlangıç pH’sının (5-12) bor giderim yüzdesi üzerine etkisi araştırılmıştır. Elde edilen sonuçlar bor gideriminin konsantrasyonla azaldığını göstermiştir. Optimum pH 8 olarak belirlenmiştir. Artan demir klorür miktarı ile bor giderim yüzdesi artmıştır. En yüksek bor giderim yüzdesi 50 mg/L demir klorür konsantrasyonu için %42.58 olarak tespit edilmiştir. Sonuç olarak demir klorürün endüstriyel atık sulardan bor gideriminde çok fazla etkili olmadığı ve jeotermal sular gibi düşük bor içerikli sularda etkili olacağı düşünülmüştür. Anahtar kelimeler: Demir klorür, Kimyasal-koagülasyon çökeltme, Bor giderimi.
584
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Boron Removal from Solutions by Chemical CoagulationPrecipitation Method Using Iron-III Chloride Mustafa KORKMAZ1,*, Elif ÖZMETİN1, Cengiz ÖZMETİN1,Elif ÇALGAN1, Yeliz SÜZEN1, Öznur ZİYANAK1, Leyla KAPLAN1, Emre ERKILINÇ1, Ozan ARICI1, Aytaç TEKEZ1 1
Balikesir University, Balikesir, Turkey *Responsible author e-mail:
[email protected]
Abstract Due to its hardening, anti-microbiyal, neutron capture, hydrogen storage properties, the use of boron has started in different field of industry and the boron has adverse health effects on living creatures. In soils the boron forms complexes with metals and these complexes are more toxic than heavy metals. The tolerable limit value of boron in drinking waters is reported as 2.4 mg/L. Therefore, it is a necessitate to remove boron from drinking, industrial and irrigation waters. In this study, the coagulation method in which ıron-III chloride(FeCl3) was being used was applied to synthetic solutions. The coagulation experiments were carried out in a Jar test device. The samples were rapid mixed during 2.5 min and slow mixed during 30 min. Boron analysis was performed by applying potentiometric method in which mannitol was being used. The pH values of solution was adjusted using 10% HCl and NaOH solutions. The boron samples was taken from jacketted glass reactor after sedimendation of flocs. The experimental parameters were 50-500 mg/L for concentration, 1-10 g for dosage, 8-12 for initial pH and the effect of parameters on removal percentages were investigated. The obtained results showed that the removal percentages decreased with increasing concentration. The optimum pH value was obtained as 8. The increasing iron chloride amount increased the removal yield. The highest removal efficiency was obtained as 42.58% for 50 mg/L concentration. As a result it was considered that the use of iron chloride for boron removal from industrial water was ineffective and it was thought that the use of this coagulat would be effective for low boron containing waters like geothermal waters. Key words: Iron Chloride, Cheimical Coagulation-Precipitation, Boron Removal.
585
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Yonga Levha Endüstrisi Atıksularından Elektrokoagülasyon Prosesi ile KOİ ve Renk Giderimi Elif ÇALGAN1, Elif ÖZMETİN1,*, Mustafa KORKMAZ1, Özge DİNÇ1, Kübra Nur ÜLKER1, Hayriye Esra KARACİN1 1 Balıkesir Üniversitesi, Balıkesir, Türkiye *Sorumlu yazar e-posta:
[email protected]
Özet Günümüzde atıksuların arıtılması için daha verimli ve uygun maliyetli teknikler geliştirmek acil bir ihtiyaçtır. Elektrokoagülasyon teknolojisinin, çeşitli atık suların arıtılması için ek kimyasallara gerek duymadan basit, güvenilir, düşük maliyetli ve umut verici bir teknik sağladığı bilinmektedir. Son yıllarda elektrokoagülasyon prosesleri; çöp sızıntı suyu, gül işleme atıksu, kimyasal mekanik parlatma atıksuyu, yağlı sintine suyu, tekstil atıksuyu, ağır metalle kirlenmiş yeraltı suyu, restoran atıksuyu, boyama atık suyu ve zeytin karasuyu arıtımı gibi alanlarda kullanılmaktadır. Çalışmamızda yonga levha atıksuyunun elektrokoagülasyonla arıtımı üzerinde çalışma parametrelerinin etkileri incelenmiştir. Yonga levha(sunta), odun hammaddesinin, yongalama makinelerinde küçük parçalara bölünüp, kurutma fırınında belli bir nem oranına indirilip, eleme işleminden sonra, tutkal, sertleştirici madde ve hidrofobik özelliğini sağlayan maddelerinin karıştırılıp sıcaklık ve basınç altında belirli bir sürede preslenmesi sonucunda ortaya çıkan mamuldür. Yonga levha atıksuları renk, askıda katı madde ve KOİ(kimyasal oksijen ihtiyacı) gibi birçok kirlilik parametresini yüksek miktarlarda içerdikleri için deşarj edilmeden önce arıtılmaları gerekmektedir. Çalışmada yonga levha atıksuyunda canlı yaşamını ve doğal ortamı olumsuz yönde etkileyen başlıca parametrelerden olan renk ve KOİ’ nin elektrokoagülasyon yöntemiyle giderimi hedeflenmiştir. Atıksuyun başlangıç renk değeri 1420 Hz ve KOİ değeri ise yaklaşık 9000 mgO2/L’dir. Elektrokoagülasyon çalışmalarında demir elektrotlar kullanılarak önemli parametrelerden olan akım ve pH’ nın, renk ve KOİ giderim verimi üzerine etkisi incelenmiştir. Çalışmalar sonucunda %49,53 KOİ ve %84,48 renk giderim verimlerine ulaşılmıştır. Ayrıca grafikler yardımıyla akım ve pH’ nın giderim verimleri üzerine etkileri ortaya konulmuştur. Anahtar kelimeler: Elektrokoagülasyon, yonga levha endüstrisi atıksuyu, KOİ, renk.
586
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
COD and Color Removal by Electrocoagulation Process from Chipboard Industry Wastewater Elif ÇALGAN1, Elif ÖZMETİN1,*, Mustafa KORKMAZ1, Özge DİNÇ1, Kübra Nur ÜLKER1, Hayriye Esra KARACİN1
1 Balikesir University, Balikesir, Turkey *Responsible author e-mail:
[email protected]
Abstract Today, there is an urgent need to develop more efficient and cost effective techniques for treatment of wastewaters. It is reported that the electrocoagulation (EC) technology provides a simple, reliable, cost-effective and promising technique for the treatment of various wastewaters without any need for additional chemicals. In recent years, this technology has been conducted as an effective method to treat various types of wastewaters such as landfill leachate, rose processing wastewater, chemical mechanical polishing wastewater, oily bilge water ,textile wastewater, heavy metal contaminated groundwater, restaurant wastewater, dyeing wastewater, and olive oil mill wastewater. In our study the effects of working parameters on the treatment of chipboard wastewater by electrocoagulation have been investigated. They are artificial wooden boards made by sticking and shaping the wood chips obtained by special machines with synthetic resin adhesives under heat and pressure. Since chipboard wastewater contains many pollution parameters such as color, suspended solids and COD (chemical oxygen demand) in large quantities it needs to be treated before being discharged. Because of the advantages of electrocoagulation, color and COD removal affecting the environment and nature negatively from the chipboard wastewater are targeted. The aim of the study was to determine the color and COD by electrocoagulation method which is one of the main parameters affecting environment and nature negatively in chipboard wastewater. The initial color value of the wastewater is 1420 Hz and the COD value is about 9000 mgO2/L. In the electrocoagulation studies, the effect of current and pH on color and COD removal efficiency was investigated using iron electrodes. As a result of the studies, 49.53% KOI and 84.48% color removal efficiencies were achieved. Furthermore, the effects of current and pH on removal efficiency were investigated with the aid of graphics. Key words: Electrocoagulation, chipboard industry wastewater, COD, color.
587
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Samsun İlinde Bir Konutun Enerji İhtiyacının Rüzgar Enerjisi ile Karşılanması Mustafa PEHLİVAN1,*, Batuhan ÖZAKIN1, Abdülvahap ÇAKMAK1 Ondokuz Mayıs Üniversitesi, Kavak Meslek Yüksekokulu, Samsun, Türkiye *Sorumlu yazar e-posta:
[email protected]
1
Özet Yenilenebilir enerji kaynaklarının önemi her geçen gün sürekli artmaktadır. Yenilenebilir enerji kaynakları içerisinde önem taşıyan bir enerji türü de rüzgar enerjisidir. Bu çalışmada Samsun ili içinde bulunan bir konutta enerji ihtiyacı belirlenmiş ve bu ihtiyacın tamamı rüzgar enerjisi ile karşılanacak şekilde tasarlanmıştır. Yatırımın maliyeti, amortisman süresi, kazanç değerleri belirlenmiş ve yatırımın ekonomik olarak yapılıp yapılamayacağı Samsun ilinde bulunan bir konut için değerlendirilmiştir. Anahtar kelimeler: Yenilenebilir enerji kaynakları, Rüzgar enerjisi, Amortisman.
588
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Satisfying with Wind Energy of Energy Demand of a Residence in Samsun Province Mustafa PEHLİVAN1,*, Batuhan ÖZAKIN1, Abdülvahap ÇAKMAK1 Ondokuz Mayıs University, Kavak Vocational School, Samsun, Turkey *Responsible author e-mail:
[email protected]
1
Abstract The importance of renewable energy resources are constantly increasing every day Important type of energy in renewable energy sources is wind energy. In this study, the energy demand in a residence in Samsun province was determined and this demand is designed to be covered by wind energy. The cost of the investment, depreciation period, profit values are determined and whether can be made of investment economically are evaluated for a residence in Samsun province. Key words: Renewable energy sources, Wind energy, Depreciation.
589
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Bingöl Şehit Mustafa Gündoğdu Caddesi Örneğinde Kamusal Alanlarda Otomobil Öncelikli Düzenleme Sorunsalı Müge YURTCAN1,*, Banu Çiçek KURDOĞLU2 Bingöl Üniversitesi, Bingöl, Türkiye Karadeniz Teknik Üniversitesi, Trabzon, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2
Özet Günümüzde nüfusun hızlı artışı ve kırsal nüfusun kentlere taşınması, kentsel alanlarda bir takım sorunların yaşanmasına sebep olmuştur. Bu sorunların başında toplu taşıma ağlarının yetersizliği, giderek artan kişisel araç kullanımının yaygınlaşması ile yaya ağırlıklı kullanım biçimlerinin ortadan kalkmış olması ve tüm bunların sonucunda da trafik yoğunluğunun kentsel alanlarda hızla artması gelmektedir. Bu sorunların yanı sıra artan arazi rantı, plansız ve niteliksiz kentsel dönüşüm, araç öncelikli alan kullanımları; yeşilden yoksun, aktif ya da pasif rekreasyona olanak tanımayan, herkes için tasarım yaklaşımından uzak, kural dışı kullanılan mekânların oluşmasına sebep olmuştur. Bu durum kentlerde bulunan sosyal ve kültürel yapıyı olumsuz bir şekilde etkilemektedir. Bu bildiride çalışma alanı olarak Bingöl il merkezinde yer alan ve mevcut kentsel dönüşüm yasalarına göre yeniden düzenlenmiş olan Şehit Mustafa Gündoğdu Caddesi seçilmiştir. Bu çalışmada uzmanlarla yapılan anketlere, yayalarla yapılan anketlere yer verilmiş ve mekânda esnaflık yapan kişiler ile görüşmeler yapılmıştır. Toplanan tüm veriler SPSS ortamında değerlendirilmiştir. Bunların yanı sıra alanın, dönüşüm öncesi durumu ile ilgili bilgiler toplanmaya çalışılmış ve alanın mevcut durumu incelenip, yaşanılan sorunlar saptanarak gelecekte karşılaşılması muhtemel sorunlar da aktarılmaya çalışılmıştır. Sonuç olarak bu çalışmada herkes için adil, estetik, kurallı bir şekilde iyileştirilmesi için uygun senaryoların hazırlanması amaçlanmış ve yaya öncelikli bir mekân oluşturulmasına yönelik önerilere yer verilmiştir. Anahtar kelimeler: Yaya, Yaya öncelikli düzenleme, Bingöl, Şehit Mustafa Gündoğdu Caddesi.
590
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Problem Of Automobile Priotrity Arrangement In Public Areas, Example Of Bingol Sehit Mustafa Gundogdu Street Müge YURTCAN1,*, Banu Çiçek KURDOĞLU2 Bingöl Üniversitesi, Bingöl, Türkiye Karadeniz Teknik Üniversitesi, Trabzon, Türkiye *Responsible author e-mail:
[email protected] 1
2
Abstract Nowadays, rapid population growth and migration to cities of the rural population causes to be experienced some chronic problems in urban areas. An insufficient public transport network, an increase of private vehicle usage, decrease of pedestrianism and as a result of these facts, an increase of traffic density on urban areas becomes head of these problems. In addition to these problems increasing land income, planless and unskilled urban renewal, automobile priority land usage give rise to devoid green, unfeasible of active and passive recreation, far from ‘’design for everyone ‘’ approach, unruled areas usage. This situation affect the social and cultural structure of the cities negatively. At this paper, Şehit Mustafa Gündoğdu Street located in city center of Bingöl and re-arranged according to existing urban transformation laws was chosen as a study area. In this study, questionnaires with specialists and pedestrians as well as interviews with storekeepers were given. Collected datum were evaluated with SPSS program. In addition to it has tried to gather information about the situation prior to conversion, current situation of the study area has been examined, problems experienced have been identified and the problems have been tried to be reported in the future. In conclusion, in this study it is aimed to equity for everyone, aesthetic, regular rehabilitation to prepare suitable scenario and is referred to pedestrian priority design proposals. Key words: Pedestrian, Pedestrian priotrity arrangement, Bingol, Sehit Mustafa Gundogdu Street.
591
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Değişik Organik Preparatların Topraksız Tüplü Çilek Fidesi Yetiştiriciliği Üzerine Etkisi İlhami TOZLU1, Nafiye ADAK2* Akdeniz Universitesi,Ziraat Fakültesi Bahçe Bitkileri Bölümü, Antalya, Türkiye 2 *Akdeniz Universitesi, Teknik Bilimler Meslek Yüksekokulu, Antalya, Türkiye *Sorumlu Yazar:
[email protected]
1
Özet Çilek yetiştiriciliğinde fide kalitesi, verim, kalite ve erkenciliği önemli derecede etkilemektedir. Türkiye’de tüplü, taze ve frigo fide tipleri yoğun olarak kullanılmaktadır. Akdeniz sahil bölgesinde taze ve tüplü fideler kullanılırken, yüksek rakımlı alanlarda frigo fideler tercih edilmektedir. Özellikle tüplü fideler, taze ve frigo fidelere göre erkenciliği teşvik etmekte ve verimi artırmaktadır. Bu çalışmada, topraksız ortamda tüplü fide yetiştiriciliğinde değişik organik preparatların (ahır gübresi, tavuk gübresi, vermikompost) iki farklı konsantrasyonun (100 ve 300 ml/ 2 L) fide gelişimi üzerine etkileri incelenmiştir (yaprak sayısı, klorofil indeksi, gövde çapı, gövde sayısı, bitki boyu). Araştırma sonucunda, vermikompost uygulaması, incelenen tüm kriterler bakımından diğer uygulamalardan daha iyi sonucu vermiştir. Ayrıca 300 ml/2 L vermikompost uygulaması tavsiye edilebilir olmuştur. Anahtar kelimeler: Fragaria x ananassa, topraksız fide gelişimi, vermikompost, tavuk, ahır gübresi.
592
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Effect Of Some Organic Compounds On Strawberry Plug Transplant Development in Soilless Conditions İlhami TOZLU1, Nafiye ADAK 2* 1
2
Akdeniz University, Faculty of Agriculture, Department of Horticulture, Antalya, Turkey Akdeniz University, Vocational Higher School of Technical Sciences, Antalya, Turkey *Responsible author e-mail:
[email protected]
Abstract Plantlet quality has a great effect on earliness, yield and fruit quality on strawberry production. Besides fresh-dug bare-root and cold-stored frigo plantlets, plugs are commonly used as transplant for strawberry fruit production. While fresh and plug transplants are used in coastal region, frigo plantlets are preferred to be used high altitude inland regions. The biggest advantages of plug plants over fresh and frigo plants are that they promote the earliness and high fruit yield. In this research, the effects of two different concentrations (100 and 300 ml/L) of some organic compounds (cow manure, chicken manure and vermicompost) on transplant development as leaf number, chlorophyll index, crown diameter, crown number, plant height grown in soilless (50% peat moss + 50% perlite) medium were examined. Results showed that vermicompost had better effect on transplant development compared to that observed on the other treatments. Furthermore, results suggest that addition of 300 ml/2 L vermicompost in peat moss + perlite mixture may be recommended for practical applications. Key words: Fragaria x ananassa, soilless plantlet development, vermicompost, chicken-cow manure.
593
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Hormon, Mikroorganizma Ve Ozmotik Solüsyonların Turunçgil Anaç Tohumlarının Çimlenmesine Etkisi Ilhami TOZLU1,*, Zafer UCOK1, Ela OZDEMIR1, Ibrahim YORGANCI1, Nafiye ADAK2 *Akdeniz Üniversitesi, Ziraat Fakültesi, Bahçe Bitkileri Bölümü, Antalya, 07058, Antalya
1
Akdeniz Universitesi, Teknik Bilimler Meslek Yüksek Okulu, 07058, Antalya *Sorumlu Yazar:
[email protected]
2
Özet Bu çalışmada önemli bazı turunçgil anaç tohumlarının çimlenme potansiyeli araştırılmıştır. Volkameriana (Citrus volkameriana V. Ten. Pasq), Cleopatra Mandarini (Citrus reshni Tan. var “Kleopatra”) ve Turunç (C. aurantium L.) tohumları üzerine hormon, mikroorganizma ve ozmotik solüsyonlar uygulanarak bunların çimlenme üzerine etkileri araştırılmıştır. Bu amaçla tohumlar kontrol (Saf su) yanında, % 0.2’lik Mikoriza, % 0.2’lik Bakteri, % 0.54-0.46’lık NAA+IAA, % 2.5’luk Tuz+Su ve % 2.5’luk Şeker+Su uygulamalarına 24 saat süre ile oda koşullarında tabi tutulmuştur. Uygulama sonrasında tohumlar nemli ortamda 19x24 cm boyutlarında kilitli poşet içerisine konularak oda koşullarında 18 gün bekletilmiştir. Deneme sonunda çimlenen tohumlar sayılarak tohumların çimlenme yüzdesi belirlenmiştir. Buna göre Volkameriana anaç tohumlarında en yüksek çimlenme yüzdesi kontrol grubunda (% 90), en düşük çimlenme yüzdesi Tuz+Su ve Şeker+Su uygulamasında (% 50) tespit edilmiştir. Cleopatra Mandarinde en yüksek çimlenme yüzdesi NAA+IAA uygulamasında (% 46.6), en düşük çimlenme yüzdesi Tuz+Su uygulamasında (% 0) tespit edilmiştir. Turunç’ta ise en yüksek çimlenme yüzdesi bakteri uygulamasında (% 70), en düşük çimlenme yüzdesi ise NAA+IAA uygulamasında (% 20) tespit edilmiştir. Anahtar kelimeler: Bitki büyüme düzenleyicisi, Bakteri, Citrus, Çoğaltma, Tuzlu su, Şekerli su.
594
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Effects Of Hormone, Microorganism And Osmotic Solution Applications To Seed Germination Of Some Citrus Rootstocks Ilhami TOZLU1,*, Zafer UCOK1, Ela OZDEMIR1, Ibrahim YORGANCI1, Nafiye ADAK2 1
Akdeniz University, Faculty of Agriculture, Department of Horticulture, Antalya, Turkey Akdeniz University, Vocational Higher School of Technical Sciences, Antalya, Turkey *Responsible author e-mail:
[email protected]
Abstract Germination potentials of some important citrus rootstock seeds were investigated. Volkameriana lemon (Citrus volkameriana V. Ten. Pasq), Cleopatra Mandarin (Citrus reshni Tan. var “Kleopatra”) and sour orange (C. aurantium L.) seeds were treated with hormones, microorganisms and osmotic solutions and germination abilities were observed. Besides control (distilled water) seeds were treated with Mychorrhizae (0.2%), bacterium (0.2%), NAA+IAA (0.54+0.46%), salt + water (2.5%) and sugar + water (2.5%) for 24 hours at room temperature. After treatments, seeds were kept in humid zip locked bag (19 x 24 cm) for 18 days. At the end of this period germinated seeds were determined and germination rate was calculated. Results showed that for Volkameriana the highest seed germination result was observed on control seeds (90%) while the lowest was observed on salt + water and sugar + water treatments (50%). The highest germination was reached on Cleopatra seeds by using NAA + IAA (46.6%) while salt + water yield with no germination. Sour orange seeds on the other hand responded best to bacterium treatments (70%) and worst to NAA + IAA with 20% germination. Key words: Plant growth regulator, Bacterium, Citrus, Propagation, Saltwater, Sugary water.
595
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Türkiye’de Hayvansal Üretim ve İklim Değişikliği Senaryoları Nazan KOLUMAN1,*, Jerry AGOSSOU1, Ufuk GÜLTEKİN2 Çukurova Üniversitesi,Ziraat Fakültesi, Zootekni Bölümü, Adana-Turkiye Çukurova Üniversitesi,Ziraat Fakültesi, Tarım Ekonomisi Bölümü, Adana-Turkiye 1
2
*Sorumlu yazar e-posta:
[email protected]
Özet İklim değişikliğinin çevre ve çiftlik hayvanları üzerindeki etkileri, sadece Dünya sisteminin radyasyona dayalı etkilerine değil, aynı zamanda insanlığın teknoloji, ekonomi, yaşam tarzı ve politikadaki değişiklikler yoluyla nasıl etki ettiğine bağlıdır. Gelecekte iklim değişikliğinin olası etkileri konusunda belirsizlikler bulunmaktadır ve senaryoların gelecekteki farklı etki-tepki mekanzizmalarının potansiyel sonuçlarını anlaşılması için kullanılması gerekmektedir. Bugüne kadar, bu senaryolar, iklim değişikliğinin hafifletilmesi ve uyarlanması gibi önemli olasılıkları yeterince incelememiş ve fiziksel, biyolojik ve sosyal bilimciler arasında bilgi alışverişini yavaşlatan araştırma süreçlerine dayanmışlardır. Burada, hayvancılığa karşı iklim değişikliği ile ilgili en zorlu ve önemli sorulardan bazılarını araştırmak için makul senaryolar yaratmak için yeni bir süreç açıklanmaktadır. Ekibimiz 2005'den günümüze kadar ICCAP Projesi olarak Akdeniz havzasının spesifik alanı için Japon ekiple 6 senaryo hazırlamıştır. Senaryolar iyimser ve kötümser bakış açısına dayanmaktadır. Bu makalenin amacı, Türkiyede ki hayvansal üretimi etkileyebilecek iklim değişikliği senaryolarını ortaya koymaktır. Anahtar kelimeler: Senaryolar, İklim değişikliği, hayvansal üretim.
596
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Scenarios for Precision to Future Climate Change and Animal Farming of Turkey Nazan KOLUMAN1,*, Jerry AGOSSOU1, Ufuk GÜLTEKİN2 Çukurova Üniversitesi,Ziraat Fakültesi, Zootekni Bölümü, Adana-Turkiye Çukurova Üniversitesi,Ziraat Fakültesi, Tarım Ekonomisi Bölümü, Adana-Turkiye 1
2
*Responsible author e-mail:
[email protected]
Abstract The implications of climate change for the environment and farm animals will depend not only on the response of the Earth system to changes in radiative forcings, but also on how humankind responds through changes in technology, economies, lifestyle and policy. Extensive uncertainties exist in future forcings of and responses to climate change, necessitating the use of scenarios of the future to explore the potential consequences of different response options. To date, such scenarios have not adequately examined crucial possibilities, such as climate change mitigation and adaptation, and have relied on research processes that slowed the exchange of information among physical, biological and social scientists. Here we describe a new process for creating plausible scenarios to investigate some of the most challenging and important questions about climate change confronting the animal farming. Our team provide 6 scenarios for spesific area of Mediterranean basin with Japanese team as ICCAP Project from 2005 to nowon. The scenarios based on optimist and pessimist consideration. The aim of this paper to determine these scenarios for future animal farming of Turkey. Key words: Scenarios, climate change, animal farming.
597
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Piroliz Edilmiş Badem Kabuğu Kullanılarak, Metil Mavinin Sulu Ortamdan Adsorpsiyonu Nazlıhan D. ELİTAŞ1,*, Merve PEHLİVAN1, Pınar ÇARMAN1, Ayşe Z. AROĞUZ1 İstanbul Üniversitesi, Mühendislik Fakültesi, Avcılar, Türkiye * Sorumlu yazar e-posta:
[email protected]
1
Özet Tekstil, plastik, kozmetik gibi birçok endüstride, renklendirme maddeleri olarak kullanılan boyar maddelerden gelen deşarjlar, ciddi çevre sorunlarına ve estetik kirliliğe neden olmakta böylece suda yaşayan canlılara zarar vermektedirler. Ayrıca, boyalar sulu ortamda ışık geçirgenliğini azaltarak, fotosentezi olayını da etkilemektedirler. Bu çalışmada, badem kabuğu, zamana ve başlangıç boyar madde derişimine bağlı olarak sulu çözeltiden metilen maviyi (MB) gidermek için düşük maliyetli adsorbent olarak kullanılmıştır. Adsorpsiyon işleminden önce badem kabuğu 800°C’de azot atmosferinde piroliz edilmiştir. Kinetik çalışmalar yapılarak piroliz edilmiş badem kabuğunun (PBK) adsorpsiyon kapasitesi incelenmiştir. Adsorpsiyon prosesinden elde edilen kinetik veriler, pseudo birinci ve ikinci derece kinetik modeller kullanılarak analiz edilmiştir. Deneysel veriler Langmuir ve Freundlich izotermleri ile incelenmiştir. Tüm deneylerde 0.25 g adsorbent madde (PBK) kullanılmıştır. Metil mavisi boyar madde çözeltisi 50 ml’dir. Adsorpsiyon yüzdeleri UV-spektrofotometrede 600 nm dalga boyunda boyar madde çözeltilerinin absorbans değerlerinde zamanla değişim ölçülerek hesaplanmıştır. Adsorpsiyon çok hızlı gerçekleşmiş olup iki saatte 0,02 gL-1 çözelti için %86.7 ulaşmıştır. Derişim arttıkça % adsorpsiyon artmaktadır. 0,08 gL-1 çözelti için % adsorpsiyon % 97.2 olarak bulunmuştur. Bu sonuçlar piroliz edilmeyen badem kabuğu kullanılarak yapılan adsorpsiyon işemi ile karşılaştırılınca piroliz işleminin adsorpsiyon verimini arttırmakta çok etkili olduğu bulunmuştur. Anahtar kelimeler: Adsorpsiyon, Metil mavi, Kinetik, İzoterm.
598
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Adsorption of Methyl Blue from Aqueous Solution Using Pyrolyzed Pyrolyzed Almond Shell Nazlıhan D. ELİTAŞ1,*, Merve PEHLİVAN1, Pınar ÇARMAN1, Ayşe Z. AROĞUZ1 Istanbul University, Engineering Faculty, Avcılar, Turkey * Responsible author e-mail:
[email protected] 1
Abstract Discharges from dyeing materials which are used in many industrias as textiles, plastics, cosmetics cause serious environmental problems and aesthetic pollution and damage the aquatic life. Reduced light penetration by dyes also affects photosynthesis in aquatic environments, which is another aspect of pollution with dyes. In the current study, almond shell is used as low-cost adsorbent to remove methyl blue (MB) from aqueous solution as a function of time and initial dye concentration. Almond Shell had been pyrolyzed at 800 °C in nitrogen atmosphere before the adsorption process. Kinetic studies were conducted to evaluate the adsorption capacity Pyrolyzed Almond Shell (PAS). The kinetic data obtained from the batchadsorption process were analyzed using the pseudo-first-order and second-order-kinetic models. The experimental data have been modeled by using the Langmuir and Freundlich isotherms. In each experiments, 0.25 g of adsorbent, PAS was used. The volume of methyl blue solutions was 50 mL. The percentages of the adsorption were calculated by measuring the changing of the absorbance values of the dye solutions usinge UV-spectrophotometer at a wavelength of 600 nm with time. Adsorption was found very fast and reached 86.7% for 0.02 g L-1 solution in two hours. The percentage of adsorption increases with concentration. The percent of the adsorption was found 97.2% for 0.08 gL-1 dye solution. Comparing these results with the adsorption of nonpyrolyzed almond shells, it was seen that pyrolysis process has been found to be very effective in increasing the yield of the adsorption. Key words: Adsorption, Methyl Blue, Kinetic, Isotherm.
599
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Balkan Coğrafyasında Osmanlı Kültürel Mirasının Korunması Ve Sürdürülebilirliği; Tika’nın Çalışmaları* Necibe Nur ALAYDIN1,*, Adile Gül ERYILMAZ2 Süleyman Demirel Üniversitesi, Isparta, Türkiye Süleyman Demirel Üniversitesi, Isparta, Türkiye * Sorumlu yazar e-posta:
[email protected] 1 2
Özet Bu çalışmada Osmanlı medeniyetine ait çok sayıda kültürel mirasa ev sahipliği yapan Balkan ülkelerinde, bu eserlerin korunması ve sürdürülebilirliğine yönelik TİKA’nın yürüttüğü proje ve faaliyetler ele alınmıştır. 500 yılı aşkın Osmanlı’nın egemenlik alanında kalmış bu bölgede, hala o dönemin izlerini taşıyan ve ortak kültürel mirasımız olan eserlerin varlığı dikkat çekmektedir. İmparatorluğun bu topraklardan çekilmeye başlamasıyla birlikte o döneme ait izlerin Slav-Hristiyan kültürüne mensup yöneticiler tarafından yok edilmeye çalışılması, Türkiye’nin harekete geçmesine neden olmuştur. Balkanlarla olan tarihsel ve kültürel yakın bağlarımız sebebiyle Türkiye’nin bu coğrafyada özellikle TİKA arayıcılığıyla Osmanlı dönemine ait eserlerin korunması ve restorasyonu konusunda önemli adımlar attığı görülmektedir. Esasen Türkiye dış politikasında yumuşak güç enstürmanı olarak işlev gören TİKA, sadece teknik yardım hizmeti sağlayan bir kuruluş değildir. Aynı zamanda kültürel anlamda köklü bağlarımız olan coğrafyalardaki ortak mirasın sürdürülebilirliği bağlamında da projeler yürütmektedir. Çalışmada Arnavutluk, Bosna-Hersek, Karadağ, Kosova, Makedonya ve Sırbistan’daki Osmanlı dönemine ait tarihi ve kültürel mirasın korunması, restorasyonu ve ihya edilmesi konusuna yer verilmiştir. Özellikle 2002 yılı sonrası bu ülkelerdeki etkinliğini arttıran TİKA’nın hala devam eden çalışmalarının kültürel mirasın yaşatılması ve sürdürülebilirliği konusunda önem teşkil ettiği görülmüştür. Anahtar kelimeler: Kültürel miras, Balkanlar, Osmanlı kültürel mirası, Koruma, Restorasyon, TİKA.
600
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Protection And Sustainability Of The Ottoman Cultural Heritage In Balkan Geography; Tika's Studies* Necibe Nur ALAYDIN1,*, Adile Gul ERYILMAZ2 1
Suleyman Demirel University, Isparta, Turkey Suleyman Demirel University, Isparta, Turkey * Responsible author email:
[email protected] 2
Abstract
In this study, were discussed the projects and activities carried out by TIKA for the protection and sustainability of these works in the Balkan countries which hosted many cultural heritages belonging to Ottoman civilization. The existence of works which are traces of that period and which are our common cultural heritage are still remarkable in this region which has remained in the territory of Ottoman Empire over 500 years. The fact that the empire had begun to withdraw from these lands and the traces belonging to it were tried to be destroyed by the Slavic-Christian culturists, caused Turkey to take action. Due to our close historical and cultural ties with the Balkans, Turkey has made significant strides in the preservation and restoration of Ottoman period artifacts, especially with the search for TIKA. Essentially acting as a soft power instrument in Turkish foreign policy, TIKA is not only an organization that provides technical assistance. It also carries out projects in the context of sustainability of the common heritage in places where we have deep-rooted ties in the cultural sense. The work included the preservation, restoration and rehabilitation of the historical and cultural heritage of the Ottoman period in Albania, Bosnia and Herzegovina, Montenegro, Kosovo, Macedonia and Serbia. It is seen that the ongoing activities of TIKA, which increased its activities in these countries especially after 2002, are important for the survival of the cultural heritage and sustainability. Key words: Cultural heritage, Balkans, Ottoman cultural heritage, Conservation, Restoration, TIKA.
601
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Yeni İletişim Teknolojileri Ve Sürdürülebilirlik Açısından Yerel Gazetelerde Değişim Ve Yöndeşme Nedret ÇAĞLAR1,* Süleyman Demirel Üniversitesi, Türkiye Sorumlu yazar
[email protected] 1
*
Özet Son yıllarda bilgi ve iletişim teknolojilerinde yaşanan değişim, yaşamın çoğu alanında olduğu gibi geleneksel medyada da dönüşüme sebep olmuştur. Geleneksel gazetecilik anlayışına alternatif bir iletişim aracı olan internet gazeteciliği; haberin okuyucu/izleyiciye ulaştırılmasında yeni yöntemler ortaya koymuş ve tek yönlü iletişimin yerini, etkileşimli iletişim almıştır. Bu farklılaşma, geleneksel gazeteciliği de etkilemiştir. Geleneksel medyanın yöndeştiği bir alan olarak internet, yeni medya uygulamalarındaki değişim açısından da önemlidir. Geleneksel medyaya oranla yeni medyada yazı, ses, fotoğraf, video ve benzeri görüntü dosyalarıyla desteklenen mesajların aynı anda, daha hızlı ve ucuz olarak hedef kitleye ulaştırılabilmesi medya şirketlerini değişime yöneltmiş, internete dayalı medya anlayışını pekiştirmiştir. Geleneksel medyada haberin üretimi, içeriğinin oluşturulması ve dağıtımında yaşanan değişim okuyucu ya da izleyiciyi de "kullanıcıya" dönüşmüştür. Yeni medyanın getirdiği teknoloji medya sektöründe çalışanlara şekil veren yeni kavramların da kaynağı olmuştur. Yeni medya çalışanlarının dijital ve web sayfa tasarımcıları olarak sektöre dâhil olması, medya profesyonellerin iş tanımlarının yeniden şekillenmesini zorunlu kılmıştır. Yeni iletişim teknolojilerinin sektöre getirdiği yeniliklerin özellikle geleneksel gazeteciliği olumsuz etkileyeceği yönündeki yorumlar; basın işletme ve profesyonellerini de bu değişime ayak uydurmaya yöneltmiştir. Bu gelişmeler yerel medyada da değişime ve yöndeşmeye sebep olmuştur. Bilgilendirme, haber verme, eğitme, eğlendirme ve kamuoyu oluşturma işlevini yerine getiren medya aynı zamanda kültürün üreticisi, tüketicisi ve taşıyıcısı olarak da görev üstlenmektedir. Bu bağlamda; Isparta’da faaliyet gösteren yerel gazetelerin yeni iletişim teknolojileri bağlamındaki değişimi incelenmiştir. Yerel gazetelerin çoğunluğunun zaman ve mekana bağlı kalmaksızın daha fazla kişiye ulaşma amacıyla, sürdürülebilir bir yayıncılık anlayışı çerçevesinde yeni iletişim teknolojileri ile entegre bir yapılanma içine girdiği tespit edilmiştir. Anahtar kelimeler: Yeni iletişim teknolojileri, yeni medya, yerel gazetecilik, yöndeşme.
602
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Change-Convergence In Local Newspapers In Terms Of New Communication Technologies And Sustainability Nedret ÇAĞLAR1,* Süleyman Demirel Üniversitesi, Türkiye Responsible author e-mail:
[email protected] 1
*
Abstract The change experienced in information and communication technologies in recent years has led to the transformation of traditional media as in the majority of life. Internet journalism, which is an alternative communication tool to traditional journalism understanding has introduced new methods in the delivery of news to readers / audiences and interactive communication has taken place in one way communication. This differentiation has also affected traditional journalism. Internet in which traditional media convergences is also significant in terms of change in new media applications. Compared to the traditional media, the delivery of messages supported by image, audio, photo, video and similar image files simultaneously, faster and cheaper to the target group has made the media companies convergence, and strengthened the media understanding based on the internet. The change experienced in the production of news, the creation and distribution of content in traditional media has changed the reader or audience into a "user", as well. The technology brought by the new media has also been a source of new concepts which shape employees in the media sector. The inclusion of new media employees to the sector as digital and web page designers has made it compulsory for the redefinition of job descriptions of media professional. The comments, which are about the innovations introduced by the new communication technologies in the sector will adversely affect especially traditional journalism, have forced the press business and professionals to adapt to this change. These developments have caused change and convergence in the local media too. The media, which performs the function of informing, educating, entertaining and raising public awareness, also serves as a culture producer, culture consumer and culture carrier. In this context, the changes, in the context of new communication technologies, of local newspapers operating in Isparta have been examined. It has been found that the majority of local newspapers, regardless of time and place, are integrated into new communication technologies with a view to reach more people within the framework of sustainable broadcasting. Key words: New Communication Technologies, New Media, Local Journalism, Convergence.
603
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
BDGG' de Elektron Taşıma Aracı Olarak Kullanılan Nb:TiO2' nin Artan Kalınlığı İle Fotovoltaik Performansının Analizi Nermin KUTLU1,* Yalvaç Teknik Bilimler Meslek Yüksek Okulu, Süleyman Demirel Üniversitesi, Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected]
1
Özet Boya duyarlaştırıcılı güneş gözelerinin (BDGG) üretiminde, yüksek dönüşüm verimliliği, yüksek fotoaktifliği, uzun süre kararlılık, düşük maliyet ve korozyona karşı direnç özellikleri yüzünden elektron taşıma aracı olarak Titanyum dioksit (TiO2) kullanılır. Şimdiye kadar TiO2 ince filmleri kaplamak için, doktor-blade, spin, sprey piroliz, kimyasal buhar biriktirme, lazer ablasyon, plazma buhar biriktirme gibi metotları kapsayan kimyasal ve fiziksel kaplama yöntemleri kullanılmış. Nb katkılı TiO2(Nb:TiO2) sentezlemek için sol-jel metod kullanılmıştır. Üretilen BDGG’ in akımgerilim değerleri AM 1.5(100 mW/cm2) aydınlatma altında ölçüldü. Bu çalışmada BDGG' de elektron taşıma aracı olarak kullanılan Nb:TiO2 'nin artan kalınlığı ile değişen fotovoltaik performansın analizi yapılmıştır. Anahtar kelimeler: Fotovoltaik, korozyon, kristal örgü, TiO2.
604
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Analyzing Photovoltaic Performance Changed With Increasing Thickness Of Nb:TiO2 Used As Electron Transport Mediator in DSSCs. Nermin KUTLU1,* 1
Yalvaç Teknik Bilimler Meslek Yüksek Okulu, Süleyman Demirel University, Isparta, Türkiye *Responsible author e-mail:
[email protected]
Abstract For manufacturing dye-sensitized solar cell(DSSCs), Titanium dioxide (TiO2) is used as electron transport mediator due to the properties of its high conversion efficiency, high photoactivity, long term stability, low cost and resistance to corrosion. So far, the various chemical and physical coating techniques including methods of doctor blade, spin-coating, spray pyrolysis, chemical vapor deposition, laser ablation, plasma vapor deposition have been used to coat the TiO2 thin films. Sol-gel method was used to synthesize Nb doping TiO2. The current-voltage values of DSSCs manufactured by Nb:TiO2 was measured under AM 1.5(100 mW/cm2) illumination. In this study, it was done the analyzing photovoltaic performance changed with increasing thickness of Nb:TiO2 used as electron transport mediator in DSSCs. Key words: Photovoltaic, corrosion, crystal lattice, TiO2.
605
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sol-Jel Metodu ile Farklı Sentez Koşullarında TiO2 örgüsüne Nb Geçiş Metalinin Katkılanması Nermin KUTLU1 Yalvaç Teknik Bilimler Meslek Yüksek Okulu, Süleyman Demirel Üniversitesi, Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected]
1
Özet Titanyum dioksit(TiO2), en verimli fotoaktiflik, en yüksek kararlılık ve en düşük maliyete sahip nanomalzemedir. TiO2, günışığı kullanarak daha temiz su elde etmek için fotokatalizör olarak kullanılmaktadır. TiO2 nanomalzemesi fiziksel ve kimyasal olarak çeşitli kaplama metotları ile edilmektedir. TiO2’ nin fotoaktifliğini arttırmak için TiO2 örgüsüne çeşitli elementler katkılanır ve böylece onun yapısı modifiye edilir. Bu çalışmada, farklı sentez koşularında TiO2 örgüsüne Nb katkılanılmış ve Nb:TiO2 nanomalzemeler elde edilmiştir. Bu çalışmada, nano teknolojik alanda pek çok çalışmalar yapılmış Nb:TiO2 nanomalzemelerinin kristal yapısı farklı sentez koşullarından nasıl etkilendiği incelenmiştir. Anahtar kelimeler: Kristal örgü, sol-jel, yer değiştirme.
606
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Doping Nb Transition Metal in TiO2 Lattice At Different Synthesis Conditions With Sol-Gel Method Nermin KUTLU1,* Yalvaç Teknik Bilimler Meslek Yüksek Okulu, Süleyman Demirel Üniversitesi, Isparta, Türkiye *Responsible author e-mail:
[email protected]
1
Abstract Titanium dioxide(TiO2) is the nanomaterial with the most efficient photoactivity, highest stability and lowest cost. TiO2 is used as a photocatalyst to produce cleaner water by using sunlight. TiO2 nanomaterials are physically and chemically obtained by various coating methods. In order to increase the photoactivity of TiO2, various elements are doped in TiO2 lattice and so its structure is modified. In this study, Nb was doped in TiO2 lattice at different synthesis conditions and Nb: TiO2 nanomaterials were obtained. In this study, it has been investigated how the crystal structure of Nb:TiO2 nanomaterials done a lot of studies in nano technological field is affected by different synthesis conditions. Key words: Crystal, lattice, sol-gel, substitution.
607
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Yalvaç İlçesinde Bina İçi
222
Rn Konsantrasyonu Ölçümleri
Halim BÜYÜKUSLU1,*, Nermin KUTLU2 Giresun Üniversitesi, Espiye Meslek Yüksekokulu, Espiye, Giresun, Türkiye Süleyman Demirel Üniversitesi, Yalvaç Teknik Bilimler Meslek Yüksekokulu, Yalvaç, Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2
Özet Rn, insanların, daha çok kapalı mekanlarda maruz kaldıkları radyoaktif bir izotoptur. Vücuda nüfuz edebilme kabiliyeti olmamasına rağmen solunum yolu ile vücut içerisine alındığında ciddi sağlık riski oluşturabilmektedir. Özellikle akciğer kanserine sebebiyet veren etmenler sıralandığında, radon gazının %10-15 ‘lik büyük bir payı söz konusudur. Daha sağlıklı ve yaşanılabilir bir çevrenin sağlanması için yaşam alanlarında ki radon konsantrasyonu seviyesinin tespit edilmesini gerekli kılmaktadır. Ölçümlerle konsantrasyonu tespit edilebilen radon gazı, havalandırma yoluyla da ortamdan uzaklaştırılabilmektedir. 222
Kapalı yaşam alanlarında önemli sağlık risklerinden biri olan Radon gazının tespiti için ülkemizde birçok ölçüm çalışması yapılmaktadır. Aktif ve pasif yöntemlerle yapılan bu ölçümlerdeki amaç; riskin derecesinin belirlenmesi, radon haritaları ve veri tabanları oluşturulması olabileceği gibi radon gazı-deprem ilişkisini belirlenmesi de hedeflenmektedir. Kapalı alan ölçümleri, yaşam konutları ve iş yerleri gibi bina içini kapsamakla birlikte mağara ve madenlerde de yapılmaktadır. Bu çalışmada; Yalvaç ilçesinde, CR-39 film detektörleri kullanılarak, kapalı ortam radon gazı ölçümleri yapılmıştır. CR-39 film detektörleri, farklı binada ayrı noktalara yerleştirilmiş olup, yaklaşık 2 ay süresince muhafaza edilmiştir. Sonuçlar, dünyada ve ülkemizde izin verilen limit değerleri ile karşılaştırılmıştır. Yüksekliğe bağlı olarak sınıflandırmalar yapılıp, yıllık etkin doz değerleri hesaplanmıştır. Olası radon gazı ve doğal radyoaktivite değişimlerinin tespiti açısından önemli olan, radon gazı konsantrasyonu ile ilgili literatüre katkı sağlanmıştır. Anahtar kelimeler: 222Rn, CR-39 film detektörü, doğal radyasyon.
608
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Indoor 222Rn Concentration Measurements in Yalvaç County Halim BÜYÜKUSLU1,*, Nermin KUTLU2 1
2
Giresun University, Espiye Vocational School, Espiye, Giresun, Turkey Süleyman Demirel University, Yalvaç Vocational School of Technical Sciences, Yalvaç, Isparta, Turkey *Responsible author e-mail:
[email protected]
Abstract 222
Rn is a radioactive isotope to which human are exposed from mostly indoor air. Although 222Rn hasn’t got enough penetration ability to human body, it can cause health risks via respiratory routes. Especially, when the factors that cause lung cancer are listed, it is composed of the large part of 10-15 % of the radon gas. It is necessary that radon concentration level must be measured to obtain most livable and most healthy environment. The radon gas, whose radioactive concentration can be determined, can also be removed from the environment by ventilation. Several measurement studies have been carried out in our country for detecting to level of radon gases which is one of the most important potential health risks in indoor air. The aims of these measurements, which can be carried out with active and passive methods, are to identify the health risk levels and to create radon maps and data bases. Also, radon- earthquake relations can be investigated in these studies. Indoor air measurements are performed in caves, mines besides living areas such as houses, work places. In this study, indoor air radon gas measurements were carried out using CR-39 film detectors, in Yalvaç county. CR-39 film detectors were placed in different locations in different buildings and they are kept for about 2 months. The results were compared with the limit values of world standards. Altitude classifications were carried out and activation values and effective dose values in the buildings were calculated. This study has contributed to the literature on radon gas concentration that is important for the detection of changes in natural radioactivity. Key words: 222Rn, CR-39 film detector, natural radiation.
609
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Organik Yumurtaların Farklı Koşullarda Muhafazasının Yumurta Kalite Özellikleri Değişimine Etkisi Nesibe KURMAÇ1,*, Musa SARICA1 Ondokuz Mayıs Üniversitesi, Ziraat Fakültesi, Zootekni Bölümü, Samsun, Türkiye *Sorumlu yazar e-posta:
[email protected]
1
Özet Bu çalışmada organik sertifikalı üretilen yumurtaların farklı saklama koşullarında iç kalite özelliklerinin değişimleri belirlenmeye çalışılmıştır. Bu amaçla 81 haftalık yaştaki organik sürüden aynı gün yumurtlanan yumurtalardan 270 adet alınmıştır. Yumurtalar buzdolabında ve dış ortamda, yıkanarak, yıkanmadan karton viyolde ve yıkanmadan karton viyolde streç film ile kaplanarak 4 hafta boyunca muhafaza edilmiştir. Muhafazanın 1, 7, 14, 21 ve 28. günlerinde her muamele grubundan 10’ar adet yumurtada iç kalite özellikleri olarak, ak yüksekliği, ak genişliği, ak uzunluğu, sarı yüksekliği, sarı çapı, sarı rengi, ak pH’sı ve sarı pH’sı belirlenmiştir. Böylelikle hangi saklama koşulunda daha uzun süre tazeliğini korudukları hakkında fikir sahibi olunmuştur. Beklendiği üzere, muhafaza süresi arttıkça tüm özelliklerde kötüleşme gerçekleşmiştir. Ancak, dış ortamda muhafaza edilen yumurtalardaki değerler daha olumsuz etkilemiştir. Yumurtanın tazeliğinin en önemli kriterlerinden bir tanesi ak pH’sıdır. İlk gün tespit edilen ortalama ak pH’sı 7.39 iken en hızlı yükselme dış ortamda yıkanarak muhafaza edilen yumurtalarda tespit edilmiştir ve 7. günden itibaren 9.30’un üzerinde değerler elde edilmiştir. Dolapta streç film ile kaplanmış karton viyolde muhafaza edilen yumurtalarda en düşük ak pH’sı değerleri elde edilmiştir. Ağırlık kayıpları değerlendirildiğinde, en düşük ağırlık kaybının dolapta muhafaza edilen yumurtalarda gerçekleştiği görülmüştür. Streç film ile paketlenmiş yumurtalar daha az ağırlık kaybetmiştir. Sonuç olarak, özellikle marketlerde satılan yumurtaların soğuk hava dolaplarında muhafaza edilmesi ve viyollerin üzerinin streç film ile kaplanarak satışa sunulması, yumurtaların son tüketim tarihine kadar bozulmadan saklanması açısından önemli görülmüştür. Anahtar kelimeler: Yumurta, organik, depolama, iç kalite, pH.
610
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Effect of Different Storage Conditions on the Change of Egg Quality Traits of Organic Eggs Nesibe KURMAÇ1,*, Musa SARICA1 Ondokuz Mayıs University, Faculty of Agriculture, Department of Animal Science, Samsun, Turkey *Responsible author e-mail:
[email protected]
1
Abstract In this study, it was tried to determine the changes of the internal quality traits of the organic certified eggs under different storage conditions. For this purpose, 270 eggs were taken from the eggs laid on the same day at the age of 81 weeks from organic flock. The eggs were stored in the refrigerator and outdoors for 4 weeks by being covered with a stretch film in the cardboard viol, without washing, washing and cardboard-washing. The albumen height, albumen width, albumen length, yolk height, yolk width, yolk color, albumen pH and yolk pH have been determined on the 1 st, 7 th, 14 th, 21 th and 28 th days of the treatment as internal quality traits in 10 eggs from each treatment group. In this way, the condition in which storage has become an idea about preserving their freshness longer. As expected, deterioration in all properties occurred as the storage time increased. However, the values in the eggs stored in the outdoor environment were more adversely affected. One of the most important criteria of egg freshness is albumen pH. The mean of albumen pH determined on the first day was 7.39, while the fastest increase was detected in the eggs that were washed and stored in the outdoor environment and values above 9.30 were obtained from the 7th day. The lowest albumen pH values were obtained in eggs stored in carton viol covered with a stretch film in the refrigerator. When egg weight loss was assessed, the lowest weight loss was seen in the eggs stored in the refrigerator. Packed eggs with stretch film lost less weight. As a result, it is important to store the eggs which are sold in the markets in the violes covered with stretch film in cold storage cabinets and so it is important to keep the eggs fresh until the last consumption date. Key words: Egg, organic, storage, internal quality, pH.
611
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürdürülebilirlik Kavramının Anlam Karmaşası; Sürdürülebilirlik Ne Anlama Geliyor? Neşe AYDIN1,* 1
Şehir ve Bölge Planlama Bölümü, Orta Doğu Teknik Üniversitesi, , Çankaya, Ankara, Türkiye *Sorumlu yazar e-posta:
[email protected]
Özet Sürdürülebilirlik terimi, kafa karıştırıcı ve karmaşık görünmektedir. İnsanlara "sürdürülebilirlik" terimi söylendiğinde ne anladıklarını sorarsanız, çok çeşitli cevaplar alabilirsiniz. Fakat aynı zamanda ekonomik, sosyal, politik ve çevresel disiplinler gibi farklı disiplinlerde de bu kavramın kullanıldığı görülebilmektedir. Her disiplin türünde sürdürülebilirlik kavramının farklı anlamları vardır. Sürdürülebilirlik, tartışmasız olarak, gelecek için uygulanabilir olmak, dengeyi korumak veya sorumlu davranmak demektir. Fakat sürdürülebilirlik kavramının bu anlamını ayrı ayrı disiplinlerde düşünüldüğünde, anlamın farklılaştığı görülebilmektedir. Örneğin, sürdürülebilirlik için yapılan tanım ekonomi ve çevre disiplinleri kapsamında düşünüldüğünde, sürdürülebiliriliğin aslında karşıt anlamları kapsadığı görülebilmektedir. Çünkü ekonomik açıdan sürdürülebilirlik çevresel açılardan sürdürülemezlik anlamına gelir ya da tam tersi çevresel açıdan sürdürülebilirlik ekonomik açıdam sürdürülemezlik anlamı taşır. Her disiplinin içeriği tamamen farklıdır ancak hepsi aynı terimi kullanmaktadır. Sürdürülebilirlik teriminin aynı anlamının farklı disiplinlerde farklı anlama gelmesinin yanı sıra farklı disiplinlerin sürdürülebilirlik terimine farklı anlamlar yüklediğini görmek de mümkündür. Bu çalışmada, sözü edilen "sürdürülebilirlik" teriminin değişen yapısı, her disiplin için incelenecektir. Literatür sürdürülebilirlik terimi kapsamında taranacak ve sürdürülebilirliğin farklı kullanımları ve anlamları anaiz edilecektir. Bu çalışma, "sürdürülebilirlik" kavramının zaman içinde nasıl değiştiğine ilişkin önemli bir çalışma olacaktır. Anahtar kelimeler: Ekonomik, politik, sosyal, çevresel, sürdürülebilirlik.
612
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Complexity Of The Meaning Of The Term Sustainability; What Does It Mean? Neşe AYDIN1,* 1
Department of City and Regional Planning, Middle East Technical University, Ankara, Turkey *Responsible author e-mail:
[email protected]
Abstract The term sustainability appears to be confusing and complex. If you ask people about what they understand by the term “sustainability”, you can get a wide variety of answers. But it also appears in different kinds of disciplines such as economic, social, politic and environmental disciplines. It has different meanings in each kind of disciplines. Sustainability surely means being viable for the future, maintaining a balance or acting responsibly. But if you think this meaning in each discipline you’ll see that it means different kinds of things. For example when we think the former explanation in terms of economic and environmental aspects we will see that it means opposite things. Because sustainibility for economy means unsustainability for environment or visa versa. Each disciplines contents are totaly different but they use the same term. Sometimes it is also possible to see the different meanings that attributed to the term sustainability. So we can see the same content of the term means different things in different disciplines and also we can see different meanings that attributed to the term in each type of disciplines. Within this study, the changing structure of the mentioned term “sustainability” is going to be examined for each discipline. The literature will be scanned within the scope of the research and annual records of the statistical institution of Turkey will be utilized. This study will be an important study in terms of how “sustainability” concept have changed in time. Key words: Economic, social, politic, environmental, sustainability.
613
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürücüsüz Araba Devrimi Hakkında Sürdürülebilirlik Tartışması Neşe AYDIN1,* 1
Şehir ve Bölge Planlama Bölümü, Orta Doğu Teknik Üniversitesi Çankaya, Ankara, Türkiye *Sorumlu yazar e-posta:
[email protected]
Özet "Bilgi Güçtür. Gerçeklik bilgi için kötü bir testtir, asıl test kullanılabilirliktir. Yeni şeyler yaratmamızı sağlayan teori, bilgiyi belirler. "Bu, Francis Bacon'un 1620'deki bilgiyle ilgili açıklamasıdır. Şu ana kadar teknoloji, bilim, toplum vb. pek çok şey değişti. Bu bilgi anlayışı bizi bu noktaya getiriyor. Sürücüsüz arabada bu anlayışın bir sonucudur. Günümüzde Şehir Planlacıları kapsamında düşünürsek, otomobiller şehir içinde çok yer kaplamaktadırlar. Onlar için yapılmış birçok yol bulunmakta, onlar için neredeyse her durakta park yeri ayrılmaktadır. Otomobiller planlarımızı şekillendirmektedir. Plancılar yaptıkları planları, araba hesaplarıyla yapmaktadır (bir şehirde kaç tane araba var?, kaç tane araba ana yolu kullanıyor?, ana meydan için ne kadar park alanına ihtiyaç duyulur? Vs.) Sürücüsüz araba, şu sözleri verdi: Artık trafik olmayacak, yollar daha güvenli olacak, park yerleri daha az olacak, dünya daha temiz ve sürdürülebilir olacak. Bu bir ulaşım devrimi. Çünkü kentlerimizi, yaşam tarzımızı, toplumumuzu yeniden şekillendirecek ve belki de sürdürülebilir bir dünyaya öncülük edecektir. Bu yazıda sürücüsüz otomobillerin getirileceği sürdürülebilir mekanlar, şehirler tartışılacaktır. Sürücüsüz araçların sürdürülebilirlik açısından avantajları nelerdir? Bize, geleceğimize, sürdürülebilir şehirlerimize ne getireceklerdir? Plancıların hangi koşullarda bu devrime dahil olması gerekir gibi sorulara cevap aranacaktır. Anahtar kelimeler: Sürücüsüz araba, devrim, sürdürülebilirlik.
614
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sustainability Discussion about the Driverless Car Revolution Neşe AYDIN1,* 1
Department of City and Regional Planning, Middle East Technical University, Ankara, Turkey *Responsible author e-mail:
[email protected]
Abstract “Knowledge is power. Reality is a bad test for knowledge, the real test is usability. The theory that allows us to make new things determines the knowledge.” This is Francis Bacon’s explanation of knowledge in 1620. From that time to now lots of things have changed in technology, science, society etc. This understanding of knowledge brings us here. Driverless car is a result of this understanding too. If we think in the scope of City Planners today cars take a lot of places in city. We have lots of roads for them, we have parking places for them at almost every stop. Cars shaped our plans. We make our plans with the accounts of cars (how many cars are there in the city?, how many cars go across to the main road?, how much parking area needed for main square? etc.) Driverless car came with the promises that there will be no traffic anymore, roads will be safer, there will be less park stations, world will be cleaner, clearer and sustainable etc. This is a transportation revolution. Because it will re-shape our cities, our life-style, our society and it will maybe lead a sustainable world. In this article the sustainable world that driverless cars going to be bring us is going to be discussed. What are driverless cars advantages in terms of sustainability? What are they going to bring to us, to our future, to our sustainable cities? In what conditions planners should be involved in this revolution? Key words: Driverless car, revolution, sustainability.
615
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürdürülebilir Mimarlık Kapsamında Karar Verme Araçlarının Çatı Seçiminde Uygulanabilirliğinin İrdelenmesi Nilay ÖZELER KANAN1,* Yüzüncü Yıl Üniversitesi, Van, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
Özet Ülkelerin gelişmişlik düzeyine göre enerji tüketiminin %35-40’ı binalar tarafından tüketilmektedir. Bu sebeple mevzuat hazırlıkları binaların enerji performanslarının yaklaşık sıfır enerjili ve sıfır enerjili bina hedeflerinin sürdürülebilirlik çerçevesinde kararlarının alınması yönünde olmuştur. Yaklaşık sıfır enerjili bina tasarımı hedeflerinin oluşturulması direktif ile belirlenen ve yapılması istenen görevlerdendir. Ancak yeşil bina sertifikalarını alan binalar dışındaki çözümlerin neredeyse tamamına mimari tasarım kararlarının alındığı aşamada başlanmamaktadır. Bu durum, bina kabuğu ile ilgili tasarım kararlarını, yapım aşamasını ve hatta kullanım aşamasını olumsuz etkilemektedir. Bu bağlamda bina kabuğunda alınacak mimari tasarım kararlarının nasıl yorumlanması gerektiği ile ilgili bir öneri gerekmektedir. Karar, bir iş veya sorun hakkında düşünülerek verilen kesin yargıdır. Karar verme bir eylemdir ve eylemi gerçekleştirmek için bir süreç geçirmek gerekmektedir. Bina mimari tasarım kararları ise karışık ve çok kriterlidir. Çok kriterli karar verme araçlarının mimari tasarım karar verme eylemi için kullanılabileceği düşünülmektedir. Bu bildirinin amacı, sürdürülebilirlik ve sürdürülebilir mimarlık için çok kriterli karar verme araçlarının uygulanabilirliğinin çatı malzemesi, yalıtım kalınlığı ve geometri seçiminde uygulanabilirliğinin irdelenmesidir. Bildiri de karar verme araçlarına yönelik açıklamalar yapılacak, demo bir çatı alanı için önemli olan mimari tasarım kriterlerinin seçiminde VIKOR yöntemi kullanılacaktır. Sonuçta karar vericinin kriterlere verdiği önceliğe göre “en tercih edilen” seçenek tespit edilecektir. Anahtar kelimeler: Çok kriterli karar verme, VIKOR, Mimari tasarım, Çatı.
616
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Examination Applicability of Decision Making Tools for Roof Selection Within Sustainable Architecture Nilay ÖZELER KANAN1,* 1
Yuzuncu Yil University, Van, Turkey *Responsible author e-mail:
[email protected]
Abstract According to the development level of the countries, 35-40% of energy consumption is consumed by the buildings. For this reason, the legislative preparations have been to make decisions about nearly zero-energy and zero-energy building targets of buildings energy performance within the scope of sustainability. Constitution of nearly zero energy building design targets with directive are tasks which are required to be determinated and adopted. Only except buildings which taken green building certificate, almost all of the solutions are not started at the stage which made architectural design decisions. This adversely affects design decisions related building envelope, the construction phase and even operation phase. Within this context, a suggestion is required on how architectural design decisions should be interpreted in the building envelope. The decision is a definite judgement given in the context of work or problem. Decision-making is an action and a process is required to carry out the action. Architectural design of the building is complex and multi-criteria decisions. It is thought that multi-criteria decision-making tools can be used for architectural design decision making. The purpose of this paper is to examine the applicability of multi-criteria decision-making tools for sustainability and sustainable architecture in the choice of roofing material, insulation thickness and geometry. Decision-making tools will be explained at this paper, the VIKOR method will be used to select architectural design criteria for a demo roof area. As a result, the "most preferred" option will be determined according to the priority given by the decision maker to the criteria. Key words: Multi-criteri decision making, VIKOR, Architectural design, Roof.
617
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sağlık Harcamaları ve Ekonomik Kalkınma İlişkisi: Türk Devletleri Örneğı Nebiye YAMAK1,*, Nilgün SALAR2 KTÜ, Trabzon, Türkiye KTÜ, Trabzon, Türkiye * Sorumlu yazar e-posta:
[email protected] 1
2
Özet Sağlık, beşeri sermayeyi etkileyen önemli bir faktör olarak ülkelerin kalkınma düzeylerinin en önemli belirleyicilerinden biridir. Bilindiği üzere, dünya genelinde sağlık harcamaları devamlı olarak artmaktadır. Bu artış sonucunda, sağlık harcamalarının ekonomilerin uzun dönem gelirleri üzerindeki etkisini belirlemeye yönelik araştırmaların yapılması büyük önem kazanmıştır. Bu çalışmanın amacı; 19952014 dönemi yıllık verilerle Azerbaycan, Kazakistan, Kırgızistan, Türkmenistan, Türkiye ve Özbekistan ülkelerinde sağlık harcamalarının yine bu ülkelerin uzun dönem gelirleri üzerindeki etkisini araştırmaktır. Kalkınmanın bir ölçütü olarak uzun dönem gelir serisi, ülkelerin Gayri Safi Yurt içi Hasılalarına Frequency Filter uygulanarak elde edilmiştir. Gerek sağlık harcamaları gerekse uzun dönem gelir serisinin durağanlıkları Im-Pesaran-Shin Birim Kök Testi ile incelenmiş ve değişkenlerin seviyesinde durağan olduğu sonucuna ulaşılmıştır. Çalışmanın yöntemi Hausman testi sonucunda belirlenmiş ve tesadüfi etkiler modelinin uygun olduğu görülmüştür. Uygulanan tesadüfi etkiler modeli sonucunda, modelin olasılık değeri %96 olarak bulunmuştur. Oluşturulan model istatistiki olarak anlamlı bulunmuştur. Ancak tesadüfi etkiler modelinde otokorelasyon ve değişen varyans gibi sorunlar olabilir. Bu sorunların olup olmadığı sırasıyla Bhargava, Franzini ve Narendranathan’ın Durbin-Watson ve Baltagi-Wu’nun Yerel En İyi Değişmez Testleri ve Levene, Brown ve Forsythe ile araştırılmıştır. Sonuç olarak modelde hem otokorelasyon hem de değişen varyans sorunun mevcut olduğu görülmüştür. Bu sorunları ortadan kaldırmak için model, Arellano, Froot ve Rogers Tesadüfi Etkiler Tahmincisi (Dirençli Standart Hatalar) modeli kullanılarak tahmin edilmiştir. Anahtar kelimeler: Sağlık Harcamaları, Uzun Dönem Gelir, Tesadüfi Etkiler Modeli.
618
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Health Expenditures And Economic Development Relation: The Case Of Turkish States Nebiye YAMAK1,*, Nilgün SALAR 2 KTÜ, Trabzon, Turkey KTÜ, Trabzon, Turkey * Responsible author e-mail:
[email protected] 1 2
Abstract Health as an important factor which affects human capital is one of the most important determinants for economic development levels of the economies. As known, in the world-wide health expenditures have continuously increased. As a result of these dramatic changes on health expenditures, implementing research in determining the effects of health expenditures on long-run incomes of the economies has been more of an issue. The purpose of this study is to investigate the effect of health expenditures on the long-run income for Azerbaijan, Kazakhstan, Kyrgyzstan, Turkmenistan, Turkey and Uzbekistan. As a proxy of economic development, long-run income was separately produced by applying the Frequency Filter to GDP of each country. Stationarity of both health expenditure and long-run income was examined by using Im- Peseran- Shin unit root test approach and it was found that all series are stationary in their levels. In addition, method of the study was determined with the result of Hausman test and random-effects model was found to be appropriate. Possibility value of the model is about %96. So, the model was found to be statistically significant. However, some statistical problems such as autocorrelation and heteroscedasticity may exist in the random-effects model. The existence of these problems was investigated by using Bhargava, Franzini, Durbin-Watson, Baltagi-Wu, Levene, Brown, Forsythe, respectively. To resolve these problems, the model was again estimated under randomeffects estimator of Arellano, Froot and Rogers. Key words: Health Expendıtures, Long-Run İncome, Random-Effects Model.
619
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Çok Kriterli Karar Verme Yöntemi ve CBS Kullanılarak Yerleşime Uygun Alanların Belirlenmesi: İzmir Kenti Örneği Nur Sinem ÖZCAN1,*, Can AYDIN2, Çiğdem TARHAN2 1 2
Şehir ve Bölge Planlama Bölümü, Pamukkale Üniversitesi, Denizli, Türkiye Yönetim Bilişim Sistemleri Bölümü, Dokuz Eylül Üniversitesi, İzmir, Türkiye * Sorumlu yazar e-posta:
[email protected] /
[email protected]
Özet Kentlerde mevcut yerleşik alan dokusu yerleşmeye uygun olmayan alanlara doğru kaymaya başlamıştır. Bunun temel nedeni olarak, günümüzde kentlerin vatandaşların gündelik ve sosyal ihtiyaçlarını karşılayamaması gösterilmektedir. Kentlerin kullanıcılarının taleplerine yetersiz kalmasının başlıca nedenleri arasında hızlı nüfus artışı karşısında artan barınma ve donatı talepleri, sosyo-ekonomik koşulların daha iyi olmasının kent yaşamını cazip hale getirmesi gibi faktörler gelmektedir. Bu durum, yapılaşmamış alanların zarar görmesine, ekolojik dengenin bozulmasına ve çeşitli afetlerin meydana gelmesine neden olmaktadır. Ekolojik sürdürülebilirlik için risk oluşturan bu sorunların yaşanmaması için kentlerdeki mevcut dokuya uyum içinde eklemlenebilecek planlı yeni yerleşim alanlarının kurulması sağlanmalı ve bu alanlara ilişkin stratejiler karar vericiler tarafından geliştirilmelidir. Yerleşime uygunluk analizi, uygun yer seçiminin yapılabilmesi için başvurulacak yöntemlerden biridir. Mekânsal planlama çalışmalarında ve araştırmalarında yerleşime uygunluk analizlerinin yapılması için sıklıkla tercih edilen yöntemlerden biri Çok Kriterli Karar Verme yöntemidir. Bu yöntemin uygulanması sürecinde Coğrafi Bilgi Sistemleri’nden önemli ölçüde yararlanılmaktadır. Bu çalışmanın amacı, İzmir kentinde (Balçova ve Narlıdere ilçelerini kapsayacak biçimde) yeni gelişim alanları için en uygun alanların Çok Kriterli Karar Verme yöntemi ve CBS kullanılarak belirlenmesidir. Çalışmada seçilen alana ilişkin eğim, bakı, arazi kullanım, erişilebilirlik, toprak kabiliyeti ve hava kirliliğine ilişkin veriler kullanılarak mekânsal analizler yapılmıştır. Analizlerden elde edilen sonuçlara göre, seçilen alanlarda yeni gelişime uygun alanlar bulunmaktadır. Analiz sonuçları tartışılmış ve alan özelinde çeşitli öneriler geliştirilmiştir. Anahtar kelimeler: Çok kriterli karar verme, CBS, AHP, arazi kullanım, yerleşime uygunluk analizi.
620
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Multi - Criteria Decision Making Analysis in GIS for Land Use Suitability Analysis: The Case of Izmir City Nur Sinem ÖZCAN1,*, Can AYDIN2, Cigdem TARHAN2 1
2
Department of City and Regional Planning, Pamukkale University, Denizli, Turkey Department of Management Information Systems, Dokuz Eylul University, Izmir, Turkey *Responsible author e-mail:
[email protected] /
[email protected]
Abstract The urban settlements have shifted towards to unsuitable areas to settle and the inadequate supply for civic needs of citizens in urban areas recently is the main reason of this shifting. There exist several factors to cause this inadequacy as the increasing demand of residential areas in urban settlements due to the rapid urbanization and dense population, etc. It is possible that the urban strategies for the new and planned settlement areas may be developed by decision makers where the ecological balance has been disrupted and the occurrence of various disasters lead in. For avoiding possible environmental problems are risky for the ecological sustainability, the new planned settlements must be established in harmony with the existing urban structure and new strategies must be developed by decision-makers for these areas. The suitability analysis is a common method to be applied for the development of these strategies. The implementation of method which is one of Multi Criteria Decision Making Models and preferred in spatial planning studies. The aim of the study is to determine the most suitable areas for the new settlements in Izmir city (including Balcova and Narlidere districts) according to the suitability factors by using GIS. The data are collected for the slope, aspect, land use patterns, accessibility, and the ability of soil and air pollution. According to the analysis results, there exists suitable areas for the new development areas in study area. The results of analysis are discussed and a variety of policies have been developed. Key words: Multi - criteria decision making, GIS, AHP, land use, suitability analysis.
621
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Hava Kirliliği ve Kent İlişkisine Ampirik Bakış: Ekolojik Sürdürülebilirlik Ekseninde Bir Değerlendirme Nur Sinem ÖZCAN1,*, K. Mert ÇUBUKÇU2 1 2
Şehir ve Bölge Planlama Bölümü, Pamukkale Üniversitesi, Denizli, Türkiye Şehir ve Bölge Planlama Bölümü, Dokuz Eylül Üniversitesi, İzmir, Türkiye * Sorumlu yazar e-posta:
[email protected] /
[email protected]
Özet Dünyada kentleşme ve endüstriyel faaliyetlerin yoğun olduğu kentsel alanlarda artan enerji ihtiyacını karşılamak için mevcut fiziksel kaynakların kontrolsüz ve hızlı tüketimi çevre sorunlarının artmasına ve etkin ve uzun dönem geçerli olmayan çevre sistemlerinin ekolojik sürdürülebilirliği riske atmasına neden olmaktadır. Kentlerde nüfus ve nüfus yoğunluğunun artması, fosil yakıtların yoğun biçimde kullanılması, plansız ve kontrolsüz kentleşme, uygunsuz ve yetersiz yakma teknikleri, açık ve yeşil alanların azalması, trafiğe çıkan motorlu taşıt sayısının artması gibi faktörler ise çevre sorunlarının artmasını olumsuz yönde tetiklemektedir. Önemli çevre sorunlarından biri olan ve her yıl tahminen 3 milyondan fazla kişinin hayatına kaybetmesine neden olan hava kirliliği problemi ise evsel ısınma, endüstriyel faaliyetler ve motorlu taşıtlarda görülen yoğun fosil yakıt kullanımı ve artan nüfusa bağlı olarak meydana gelen kentsel faaliyetler nedeniyle özellikle kentsel alanlarda modern yaşamın kaçınılmaz bir sonucu haline gelmiştir. Bu çalışma, fiziksel mekanda kentsel hava kirliliğine neden olan faktörlerin tespitine yönelik olarak yakın geçmişte yapılmış olan ampirik çalışmaların taranmasını ve bu çalışmalardan yapılan çıkarımların ekolojik sürdürülebilirlik kavramı temelinde değerlendirilmesini içermektedir. Burada amaç, kentsel alanlarda hava kirliliğinin oluşmasında etkili olan faktörleri incelemek ve ekolojik bakımdan sürdürülebilir olmayan kentsel uygulamaları sürdürülebilirliğin hedeflendiği şehir planlaması disiplini içerisinde değerlendirmektir. Anahtar kelimeler: Kentsel hava kirliliği, ekolojik sürdürülebilirlik, şehir planlama, ampirik çalışmalar.
622
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Empirical Overview of the Relationship Between Air Pollution and City: An Assessment from the Perspective of Ecological Sustainability Nur Sinem OZCAN1,*, K. Mert CUBUKCU2 1
Department of City and Regional Planning, Pamukkale University, Denizli, Turkey Department of City and Regional Planning, Dokuz Eylul University, Izmir, Turkey * Responsible author e-mail:
[email protected] /
[email protected]
2
Abstract The rapid and uncontrolled consumption of physical resources to meet growing energy needs in urban areas where urbanization and industrial activities are intensive cause the increase of environmental problems and the existing of non-effective and short term ecological systems risking the ecological sustainability throughout the world. The increase of population and population density, intense usage of fossil fuels, the unplanned urbanization, the use of incorrect and incomplete combustion techniques, the degradation of open and green areas and the increase of motor vehicles in traffic are principal factors which stimulate the environmental problems negatively. As one of the most important environmental problems that cause approximately more than 3 million people lose their lives, the urban air pollution problem becomes an inevitable consequence of modern urban life because of dense use of fossil fuels in domestic heating and industrial facilities and also urban activities depending on the population increase. This paper reviews recent empirical studies that examines the principal factors inducing urban air pollution in the built environment and considerations of these studies’ reviews based on the ecological sustainability. The study is intended to examine the factors that induce the air pollution in urban areas and to evaluate non-sustainable urban practices environmentally in the context of urban planning discipline targets the sustainable livable environments. Key words: Urban air pollution, ecological sustainability, city planning, empirical studies.
623
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Su Kaynaklarının Sürdürülebilirliği ve Korunumu Nuray ÇAĞLAR BALKIS1,*, Abdullah AKSU1, Ayhan FİLAZİ2, Cem GAZİOĞLU3, Ender YARSAN2, Volkan DEMİR3, Nagihan KORKMAZ1, Ömer S. TAŞKIN1 İstanbul Üniversitesi, Deniz Bilimleri ve İşletmeciliği Enstitüsü, Kimyasal Oşinografi Anabilim Dalı, İstanbul, Türkiye 2 Ankara Üniversitesi Veteriner Fakültesi Farmakoloji ve Toksikoloji Anabilim Dalı, Ankara, Türkiye İstanbul Üniversitesi, Deniz Bilimleri ve İşletmeciliği Enstitüsü, Denizel Çevre Anabilim Dalı, İstanbul, Türkiye * Sorumlu yazar e-posta:
[email protected]
1
3
Özet Yeryüzünün en önemli doğal kaynaklarından olan su, iklim değişimleri ve küresel ısınma nedeniyle hızla azalırken, Amerika’da buharlaşmayı engelleyici yüzey aktif maddeleri geliştirilmiş ve dünyanın özellikle kurak bölgelerinde (Kanada, A.B.D, Meksika, Avustralya, Singapur, Şili ve Batı Afrika) düzenli olarak kullanılmaya başlanmıştır. Yapılan araştırma çalışmaları sonucunda da % 35’e varan oranlarda buharlaşmanın azaldığı tespit edilmiştir. WaterSavr isimli bu ürün US EPA ve NSF-ANSI 60 onaylıdır. % 90 Kalsiyum Hidroksit (Gıdada kullanılabilir söndürülmüş kireç) ve % 10 Heksadekanol ve Oktadekanol – (Doğal Hindistan Cevizi / Palm yağı ekstraktı) bileşiklerinden oluşmaktadır. Bozunma süresi 48-72 saattir. Fotooksidasyon, kimyasal ve mikrobiyolojik bozunma reaksiyaonları ile H2O ve CO2’ e kadar bozunmaktadır (www.flexiblesolutions.com/products/watersavr), Sözkonusu bu ürünün su kalitesi ve canlı kaynaklar üzerine potansiyel etkisinin araştırılması amacıyla DSİ Teknik Araştırma ve Kalite Kontrol Dairesi Başkanlığı’nca uygun görülen ve Ankara’nın 16 km kuzeyinde bulunan Kösrelik Göleti’nde Temmuz 2015-Mart 2016 döneminde uygulama başlatılmış ve “WaterSavr” isimli ürünün uygulaması sonucunda gölette su kalitesinin iyileştiği tespit edilmiştir. Su ve sedimentlerde ürünün yapısında bulunan bileşiklere ve bozunma ürünlerine rastlanmamıştır. Sitotoksisite çalışmaları da ürünün sitotoksik etki göstermediğine işaret etmiştir. Ayrıca % 38’e varan oranlarda buharlaşmanın azaldığı da belirlenmiştir. Anahtar kelimeler: Yüzey Aktif Madde, Buharlaşma, Ekolojik Denge, Su Kalitesi, Su Kaynakları Yönetimi, Rehabilitasyon.
624
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sustainability and Conservation of Water Resources Nuray ÇAĞLAR BALKIS1,*, Abdullah AKSU1, Ayhan FİLAZİ2, Cem GAZİOĞLU3, Ender YARSAN2, Volkan DEMİR3, Nagihan KORKMAZ1, Ömer S. TAŞKIN1 1
3
Istanbul University, Institute of Marine Science and Management, Department of Chemical Oceanography, Istanbul, Turkey 2 Ankara University, Faculty of Veterinary, Department of Pharmacology and Toxicology, Ankara, Turkey Istanbul University, Institute of Marine Science and Management, Department of Marine Environment, Istanbul, Turkey * Responsible author e-mail:
[email protected]
Abstract While water, one of the world's most important natural resources, is rapidly declining due to climate change and global warming, evaporation-inhibiting surfactants have been developed in the United States and used regularly in the world's particularly arid regions (Canada, USA, Mexico, Australia, Singapore, Chile and West Africa). It was initiated. As a result of the researches carried out, it has been found that evaporation decreases by up to 35%. This product is named WaterSaver, is US EPA and NSF-ANSI 60 approved. It consists of 90% Calcium Hydroxide (used lime extinguishing used in the garden) and 10% Hexadecanol and Octadecanol - (Natural Coconut / Palm oil extract) compounds. Degradation time is 48-72 hours. Photooxidation degrades to H2O and CO2 with chemical and microbiological disruption reactions. In order to investigate the potential effect of this product on water quality and live resources, application was started in Kösrelik Lake, 16 km north of Ankara, which was approved by DSİ Technical Research and Quality Control Department and implemented in July 2015-March 2016 period and the application named "WaterSavr" As a result of the application of the product, improvement of water quality in the this lake has been determined. In water and sediments, no compounds or disinfecting products were found in the structure of the product. Cytotoxicity studies also indicated that the product did not show cytotoxic effects. It has also been determined that evaporation is reduced by up to 38%. Key words: Surfactant, Evaporation, Ecological Balance, Water Quality, Water Resources Management, Rehabilitation.
625
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Dış Ticaretin Sürdürülebilirliğinde “Marka”: Isparta İli Örneği Nurdan KUŞAT1,* Süleyman Demirel Üniversitesi, Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
Özet Sürdürülebilir kalkınma anlayışı sürdürülebilir rekabet anlayışını da peşinden getirmiştir. Ayrıca bu rekabetin küresel boyutlarının varlığı, “küresel sürdürülebilir rekabet” anlayışının yapı taşını oluşturmuştur. Bir ülkenin dış ticaretinin büyük ölçüde iç ticaretiyle paralel bir görünüm sunduğu hatırlanacak olursa, ülkenin verimlilik düzeyinin, dış ticaretteki verimlilik düzeyini de belirleyeceği anlaşılır. Bu nedenle verimlilik düzeyi yüksek ülkelerin, uluslararası rekabet güçleri de yüksektir. Türkiye ekonomisi yıllar itibariyle her ne kadar gelişen bir yapı sergilese de, verimlilik düzeyinin düşüklüğü oldukça dikkat çekmektedir. Neticede; Türkiye dış ticareti uluslararası rekabet gücü karşısında zayıf kalmakta ve daha açık bir ifadeyle dış ticaret açıkları gündeme gelmektedir. Bu çalışma ile Türkiye dış ticaretini sürdürülebilir kılmak için “marka” olgusunun kullanılabilirliği irdelenmek istenmiştir. Çünkü günümüzde küreselleşme sürecinin de etkisiyle, standart ve fiyat avantajına sahip ürünlerin yerini, daha tüketici odaklı ve kaliteli ürünlerin aldığı gözlenmektedir. Bu talep farklılaşmasında marka imajının önemli bir rol üstlendiği de görülmektedir. Sürdürülebilir rekabet gücünün artırılması ve sürdürülebilir kalkınmanın sağlanması ise dış ticarette markalaşma sorunun aşılması ile sağlanabilecektir. Uygulamada markalaşma süreci, hem ülkeler hem firmalar için uzun ve pahalı bir süreçtir. Türkiye dış ticaretinin KOBİ ve aile şirketi ağırlıklı yapısı, markalaşmanın önünde önemli engeller oluşturmaktadır. KOBİ’lerin finansal ve yönetsel yetilerinin zayıflığı ve aile işletmelerinin kurumsallaşmaya olan uzaklığı düşünüldüğünde, dış ticaret işletmelerinin başarılı bir markaya sahip olmasının imkansızlığı anlaşılacaktır. Çalışma kapsamında önce markalaşmanın dış ticaretin sürdürülebilirliği için neden gerekli olduğu konusu vurgulanmaktadır. Daha sonra ise kalkınma anlayışında yaşanan değişimin bir getirisi olan yerel kalkınma anlayışı çerçevesinde, sürdürülebilir kalkınma için yerel dış ticarette markalaşma olgusu değerlendirilmektedir. Bu değerlendirmede Isparta ilinin dış ticaretinde markalaşma kabiliyeti niteliksel analiz yöntemiyle test edilmektedir. Elde edilen bulgular Isparta dış ticaretinde söz sahibi olan firmaların markalaşma yönünden yetersizliğini, hatta yurtiçinde büyük marka olduğunu düşündüğümüz firmaların bile yurt dışı için marka özelliği göstermediğini ortaya koymaktadır. Anahtar kelimeler: Sürdürülebilir Kalkınma, Sürdürülebilir Dış Ticaret, Uluslararası Rekabet Gücü, Marka, Uluslararası Marka.
626
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
"Brand" in Sustainability of Foreign Trade: Isparta Province Case Nurdan KUŞAT1,* Süleyman Demirel Üniversitesi, Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
Abstract Sustainable development approach has brought pursue the sustainable competitive approach. Moreover the existence of global dimensions of this competition constituted the building block of "global sustainable competition". A country's foreign trade is largely parallel to its internal trade. For this reason, the productivity level of the country will also determine the level of productivity in foreign trade. For this reason, countries with high productivity levels have high international competitiveness. Although the Turkish economy has shown a developing structure over the years, the low level of productivity has attracted considerable attention. Eventually; foreign trade in Turkey is weak against the international competitiveness and foreign trade deficits are emerging. With this study, it is desired to examine the usability of the "brand" phenomenon in order to make Turkey's foreign trade sustainable. Because today, due to globalization process, products with standard and price advantages are replaced by more consumerfocused and quality products. It is also seen that brand image plays an important role in this demand differentiation. Increasing the sustainable competitive power and ensuring sustainable development can be achieved by addressing the problem of branding in foreign trade. In practice, the branding process is a long and expensive process for both countries and firms. The structure of Turkey's foreign trade dominated by SMEs and family companies constitutes a major obstacle to branding. The weakness of the financial and managerial competence of SMEs and the distance of institutionalization of family businesses suggest that it is impossible for foreign trade enterprises to have a successful brand. In the content of the study, it is emphasized firstly why the branding is theoretically necessary for the sustainability of foreign trade. Later, in the framework of local development concept, which is a result of change in development concept, branding in local foreign trade is evaluated for sustainable development. In this evaluation, the ability of branding in foreign trade of Isparta province is tested by qualitative analysis method. The findings show the inadequacy of the companies having a say in foreign trade of Isparta in terms of branding. Even the companies that we think are big brands in the country do not show the trademark for abroad. Key words: Sustainable Development, Sustainable Foreign Trade, International Competitiveness, Brand, International Trademark.
627
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Turunçgil Uzun Antenli Böceği Anoplophora chinensis (Forster,1771) (Coleoptera: Cerambycidae) ile Mücadele Olanakları Nurdan TOPAKCI1,*, Utku YÜKSELBABA2 Akdeniz Üniversitesi, Teknik Bilimler Meslek Yüksekokulu, Anytalya Türkiye Akdeniz Üniversitesi, Ziraat Fakültesi, Bitki Koruma Bölümü, Antalya,Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2
Özet Asya kökenli bir zararlı olan Anoplophora chinensis, Türkiyede ilk kez 2014 yılında İstanbul’da tespit edilmiştir. Doğal yayılış alanlarında özellikle Citrus cinsine bağlı bitki türlerinde ayrıca meyve ağaçları, kozalaklı bitkiler ve odunsu süs bitkilerinde zararlı olmaktadır. Larva dönemini ağaç gövdesinin odun dokusu içinde geçiren zararlının mücadelesi zordur. Bu çalışmada zararlı ile mücadele konusunda yapılmış çalışmalara yer verilmiştir. Zararlıya karşı en önemli mücadele yöntemi karantina tedbirlerinin alınmasıdır. Ayrıca, doğal düşmanlara yönelik umut verici çalışmalara rastlanmaktadır. Avrupa’da Aprostocetus fukutai ile Japonya’da Ontsira anoplophorae ve Tetrastichus (=Aprostocetus) sp, zararlının öne çıkan parazitoidleri olarak bildirilmiştir. Çin’de Oecophylla smaragdina’nın özellikle citrus bahçelerinde zararlıyı kontrol altına aldığı bildirilmiştir. Bitkinin alt gövdesinin ağ ile kapatılması ve yapışkan plakaların kullanımı zararlının yakalanmasını sağlayan ve yumurtlamasına engel olan fiziksel yöntemlerdir. Bazı neonicotinoidlerin erginlere karşı etkili olduğu belirlenmiştir. Ağır bulaşmalarda bitki dallarının kesilerek yakılması ve larvalara karşı dışkı deliklerinden mikroenjeksiyon yapılması mücadelede önemli olmaktadır. Ülkemizde zararlının varlığının tespiti için resmi sürveyler yapılmakta ve belirlenmesi durumunda acilen eradikasyon çalışmaları gerçekleştirilmektedir. Anahtar kelimeler: Anoplophora chinensis, mücadele, doğal düşman, eradikasyon.
628
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Management Opportunities with Citrus Long-Horned Beetle Anoplophora chinensis (Forster, 1771) (Coleoptera: Cerambycidae) Nurdan TOPAKCI1,*, Utku YÜKSELBABA2 1
Akdeniz University, Vocational School and Technical Science, Antalya, Turkey Akdeniz University, Faculty of Agriculture, Plant Protection Department, Antalya, Turkey *Responsible author e-mail:
[email protected]
2
Abstract Anoplophora chinensis, a pest of Asia origin, was first discovered in 2014 in İstanbul, Turkey. It is harmful in the natural distribution areas, especially in plant species belonging to Citrus genus, as well as in fruit trees, conifer plants and woody ornamental plants. Management of the pest is difficult because the larval period passes through in wood tissue of tree. In this study, studies on management strategies of the pest were discussed. The most important control method against pest is to take quarantine measures. In addition, there are promising studies for natural enemies. Aprostocetus fukutai in Europe and Ontsira anoplophorae and Tetrastichus (=Aprostocetus) sp in Japan have been reported as prominent parasitoids. In China, it has been reported that Oecophylla smaragdina has controlled the pest, especially in citrus gardens. Covering the lower body of the plant with a mesh and use of sticky traps are physical methods that provide protection and prevent the laying of the adults. It has been determined that some neonicotinoids are effective against adults. In heavily infestations, it is important that cutting off plant branches and to make microinjection through the frass holes against the larvae. In Turkey, official surveys are carried out to determine the existence of the pest, and eradication studies are carried out urgently if it is determined. Key words: Anoplophora chinensis, management, natural enemies, eradication.
629
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Turunçgil Yeşillenme Hastalığı (HLB) Vektörleri Diaphorina citri Kuwayama (Hemiptera:Liviidae) ve Trioza erytreae Del Guercio (Hemiptera:Triozidae) Nurdan TOPAKCI1,* Akdeniz Üniversitesi, Teknik Bilimler Meslek Yüksekokulu, Anytalya Türkiye *Sorumlu yazar e-posta:
[email protected]
1
Özet Turunçgil yeşillenme Hastalığı, Citrus Huanglongbing Disease (HLB), bakteriyel etmen Candidatus Liberibacter spp’in neden olduğu turunçgillerin en yıkıcı hastalıklarından birisidir. Hastalık öncelikli olarak aşılama yoluyla ve vektör böceklerle turunçgil alanlarında taşınmaktadır. Vektör böcekler Asya turunçgil psillidi Diaphorina citri Kuwayama (Hemiptera:Liviidae) ve Afrika Turunçgil psillidi Trioza erytreae Del Guercio (Hemiptera:Triozidae) varlığında hastalığın yayılması çok hızlı olmaktadır. Ülkemizde henüz bakteriyel etmene ve vektörlerine rastlanmamıştır. Ancak her iki vektör, dünyanın pek çok ülkesinde yayılmaktadır. D. citri Asya ve Amerika’da, T. erytrea ise en son 2014-2015 yıllarında kuzeybatı İspanya ve Portekiz’de görülmüştür. Türkiye, dünya turunçgil üretiminde ilk 10 sıra içerisinde yer almaktadır. Vektör böceklerin Ülkemize girişinin önlenmesine yönelik karantina çalışmaları ve survey çalışmalarının titizlikle takip edilmesi önem arz etmektedir. Bu çalışmada vektör böceklerin tanınması, dünyadaki dağılımı ve mücadelesine yönelik olarak yapılmış çalışmalara yer verilmiştir. Anahtar kelimeler: Turunçgil yeşillenme Hastalığı, Diaphorina citri, Trioza erytreae.
630
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Vectors of Citrus Greening Disease (HLB) Diaphorina citri Kuwayama (Hemiptera:Liviidae) and Trioza erytreae Del Guercio (Hemiptera:Triozidae) Nurdan TOPAKCI1,* 1
Akdeniz University, Vocational School and Technical Science, Antalya, Turkey *Responsible author e-mail:
[email protected]
Abstract Citrus Greening Disease, Citrus Huanglongbing Disease (HLB), is one of the most devastating diseases of the citrus plants caused by the bacterial pathogen Candidatus Liberibacter spp. The disease can be carried and spread in citrus fields with production material, pruning tools and insect vectors. In the presence of insect vectors, Asian citrus psyllid Diaphorina citri Kuwayama (Hemiptera:Liviidae) and African citrus psyllid Trioza erytreae Del Guercio (Hemiptera:Triozidae) the spread of the disease is very rapid. The pathogen and its vectors have not yet been found in our country. However, both vectors are spread in many countries of the world. D. citri was spread in Asia and America, T. erytrea was most recently encountered in north-western Spain and Portugal in 2014-2015. Turkey is located within the first 10 rows in world citrus production. Quarantine studies to prevent the introduction of vectors into country and careful monitoring of surveys are important. In this study, the recognition of the vectors, their distribution in the world and the studies carried out for the management of insects were discussed. Key words: Citrus Greening Disease, Diaphorina citri, Trioza erytreae.
631
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Katı Atık Yönetimi İçin Çok Kriterli Bir Karar Modeli: Türkiye İçin Bir Uygulama Nurdan YILDIZ1,*, Fatih TÜYSÜZ2 İstanbul Gelişim Üniversitesi, İstanbul, Türkiye 2 İstanbul Üniversitesi, İstanbul, Türkiye *Sorumlu yazar e-posta:
[email protected]
1
Özet Küreselleşen dünyada nüfusun hızla artması, tüketim miktarını arttırmakta ve bu, insanlar tarafından daha çok atık üretilmesine neden olmaktadır. Sürdürülebilir bir yaşam için bu atıkların çeşitli bertaraf ve geri kazanım yöntemleri ile çevreye zarar vermeden uzaklaştırılması gerekmektedir. Bu açıdan hem özel sektör kuruluşları hem de devlet kurumları bu konuya hassasiyet göstermeli ve gerekli planlamayı yapmalıdırlar. Bu bağlamda katı atık yönetimi, çevre kirliliğini giderme ve doğal kaynakların korunmasında önemli bir konudur ve sadece çevresel faktörlerin değil aynı zamanda ekonomik, teknolojik, sosyal vb. birçok faktörün dikkate alınmasını gerektiren kompleks bir süreçtir. Bu çalışmada, katı atık yönetimini etkileyen faktörler analiz edilmiş ve Türkiye için en iyi bertaraf ve geri kazanım yöntemini seçmek için çok kriterli bir model sunulmuştur. İlk olarak detaylı bir alan yazın taraması yapılarak ve uzman görüşlerini de dikkate alarak katı atık yönetiminde etkili olan faktörler belirlenmiştir. Daha sonra da uzman görüşüne dayanan çok kriterli bir karar modeli ile katı atık bertaraf ve geri kazanım yöntemleri değerlendirilmiştir. Bu çalışmada önerilen çok kriterli grup karar verme modeli ve bunun uygulanması sonucu elde edilen sonuçlar başta Türkiye olmak üzere atık yönetimi konusunda yapılacak stratejik kararlara ışık tutabilir. Anahtar kelimeler: Çok Kriterli Karar Verme, Katı Atık Yönetimi, Sürdürülebilirlik.
632
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
A Multi Criteria Decision Model For Solid Waste Management: A Case Of Turkey Nurdan YILDIZ1,*, Fatih TÜYSÜZ2 Istanbul Gelişim University, Istanbul, Turkey 2 Istanbul University, Istanbul, Turkey *Responsible author e-mail:
[email protected] 1
Abstract The rapid growth of the population in the globalizing world increases the amount of consumption and this leads to more waste being produced by people. For a sustainable life, these wastes must be removed without harming the environment with various disposal and recycling methods. In this respect, both private sector institutions and government agencies should be sensitive to this issue and make the necessary planning. In this context, solid waste management is an important issue in decontaminating environmental pollution and protecting natural resources and it is a complex process which requires consideration of not only environmental factors but also economic, technological and social factors etc. In this study, factors affecting solid waste management are analyzed and a multi-criteria model is presented for choosing the best disposal and recovery method for Turkey. Firstly, the factors that affect solid waste management were identified by both detailed review of literature and taking into account expert opinions. Subsequently, a multi-criteria decision model based on expert opinion was used to assess solid waste disposal and recovery methods. The multicriteria group decision making model proposed in this study and its application results can shed light on the strategic decisions to be made in waste management, especially in Turkey. Key words: Multi-Criteria Decision Making, Solid Waste Management, Sustainability.
633
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürdürülebilir Kalkınma Faktörlerinin Analizi için Çok Kriterli Karar Modeli Önerisi Nurdan YILDIZ1,*, Fatih TÜYSÜZ2 İstanbul Gelişim Üniversitesi, İstanbul, Türkiye 2 İstanbul Üniversitesi, İstanbul, Türkiye *Sorumlu yazar e-posta:
[email protected]
1
Özet Gelecek nesillere yaşanabilir bir dünya bırakmak geçmişten günümüze önemi artan sürdürülebilirlik konusunu güncel kılmaktadır. Dünyanın sürdürülebilirliği onu oluşturan ülkelerin, bölgelerin, şehirlerin sürdürülebilirliği ile doğru orantılıdır. Bu nedenle sürdürülebilirliğe erişilebilmesi için sürdürülebilir kalkınma önemlidir ve birçok faktörden etkilendiği için bu faktörlerin birlikte değerlendirilmesini içermektedir. Bu çalışmada, sürdürülebilir kalkınmanın ölçülmesine yardımcı olacak ekonomik, çevresel ve sosyal faktörler araştırılmış ve bu faktörler çok kriterli karar verme (ÇKKV) yöntemi ile analiz edilerek önceliklendirilmiştir. Sunulan yaklaşım hem sürdürülebilir kalkınma faktörlerini analiz etmeye, hem de onları önem düzeylerine göre ağırlıklandırmaya olanak tanımaktadır. Sonuçlar, gelecekteki araştırmalarda şehirlerin, bölgelerin veya ülkelerin sürdürülebilir kalkınmasının ölçülmesinde yararlı olabilir. Anahtar kelimeler: Çok Kriterli Karar Verme, Sürdürülebilir Kalkınma, Sürdürülebilirlik Göstergeleri.
634
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
A Multi-Criteria Decision Model Proposal for the Analysis of Sustainable Development Factors Nurdan YILDIZ1,*, Fatih TÜYSÜZ2 Istanbul Gelişim University, Istanbul, Turkey 2 Istanbul University, Istanbul, Turkey *Responsible author e-mail:
[email protected] 1
Abstract Leaving a livable world for future generations keeps the issue of sustainability up to date. The sustainability of the world is directly proportional to the sustainability of the countries, regions and cities. For this reason, sustainable development is important for achieving sustainability and it requires the evaluation of various elements from different perspectives since it is influenced by many factors. In this study, economic, environmental and social factors that will help to measure sustainable development are reviewed and these factors are analyzed and prioritized with an appropriate multicriteria decision making (MCDM) method. The presented approach allows to both analyze sustainable development factors, and also weight them according to their importance level. Results can be useful in measuring sustainable development of cities, regions or countries and can be used in future researches. Key words: Multi-Criteria Decision Making, Sustainable Development, Sustainability Indicators.
635
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürdürülmesi Zorunlu Bir Değer Olarak Çevre Etiği Nurten KİRİŞ YILMAZ1,*, Hülya YALDIR2 Süleyman Demirel Üniversitesi, Isparta, Türkiye 2 Pamukkale Üniversitesi, Denizli, Türkiye * Sorumlu yazar e-posta:
[email protected]
1
Özet Ahlak, insanın ortaya çıktığı ilk andan itibaren, her ilişki türünde karşımıza çıkan bir kavramdır. Bu ilişkilerin yerelden kurtarılarak genel bazı yaklaşımlara göre de evrensel hale gelmesine ise ahlak felsefesi ya da etik denilmektedir. Günümüzde hemen her alanın içinde karşılaştığımız bir sözcük olarak etik kavramı asıl anlamından kopmuş bir şekilde karşımızda durmaktadır. Etik kavramının kendisinde temel sorunlar mevcutken bir yandan da etik ile çevre arasındaki sorunlar iyice çözülemez bir hal almıştır. İnsan bir çevrede yaşamaya muhtaç ama yaşadığı çevreyi değiştirme, dönüştürme kabiliyetine de sahip tek varlıktır. Bu anlamda insan hem çevreye bağımlı, zorunlu hem de çevreden bağımsız ve dönüştürücü kuvvettir. Çevreye bağımlı insan çevreye en az zarar veren insandır ama ne zaman ki içinde varolduğu çevreyi dönüştürmeye kalkmışsa işte o zaman tahrip etme, kendisi dışındaki canlılara karşı hakimiyet kurma adeta kendisini çevresinin kralı ilan etme işine girişmiştir. Teknolojik gelişmelerle birlikte insan karşısında güçsüz olduğu çevreye kafa tutmaya başlamış ve teknolojinin eline verdiği güç ile çevreyi istediği gibi kullanmaya adeta sömürmeye başlamıştır. Oysa çevrenin kendine ait bir değeri vardır ve bu değer insanoğlu tarafından göz ardı edilmektedir. Etik alanının bir alt alanı olarak çevre etiği, çevredeki sorunları ele alıp inceleme işini yaparken asıl amacı çevrenin mevcut durumundaki değerine saygı duymayı öğretmektir. Çünkü yüzyılımız artık ahlak üzerine görüşlerin yalnızca insan- insan arasındaki ilişkiden ayrıldığı, küreselleşme, endüstrileşme, teknolojinin gelişmesi gibi güçler ile donatılmış insanın adeta bir Frankeystayn’ a dönüşerek, hayvan- insan, bitkiinsan, doğa-insan ilişkisini kopardığına şahit olduğumuz bir yüzyıldır. Oysa yeni yaklaşımlar insanı doğasından bağımsız bir şekilde ele almanın olanaklı olmadığını bu nedenle insanı düşündüğümüz her yerde onun organik ve anorganik bir dünya kapsamında düşünebildiğimizi ele almaktadır. Bu sebeple çevremize karşı saygı duymamız ya da çevremizin değerini kanıksamamız için ahlak buyruklarına ihtiyacımız vardır. Çevre etiği, insan merkezli, canlı merkezli ve çevre merkezli olmak üzere üç ilişki türünde, çevremize karşı geliştireceğimiz her eylemin amacını, içeriğini, kapsamını ele alan etik anlayıştır. Yani burada artık yalnızca insanın mutluluğunu ele alan etik anlayışlardan, çevre ve canlı merkezli etik anlayışa doğru bir evrilme olmuştur. Bu çalışmada da insan merkezli etik anlayıştan evrilmenin niçin sürdürülmesi zorunlu bir değer olduğu ele alınmaya çalışılacak ve çevre etiği ile ilgili bazı yaklaşımlar hususunda bilgilendirme yapılacaktır. Anahtar kelimeler: Etik, Çevre, Canlı, İnsan
636
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Environmental Ethics As A Mandatory Value To Be Sustained Nurten KİRİŞ YILMAZ1,*, Hülya YALDIR2 Süleyman Demirel Üniversitesi, Isparta, Türkiye 2 Pamukkale Üniversitesi, Denizli, Türkiye *Responsible authore-mail:
[email protected] 1
Abstract Morality is a concept that comes out in every kind of relationship from the first moment when a human being was created. These relations’ liberation from local approaches and becoming universal according to some general approaches, is called moral philosophy or ethics. The concept of ethics, as a word we face today in almost every field, stands in a way that is detached from its original meaning. While there are fundamental problems in the concept of ethics itself, the problems between ethics and the environment have become insoluble. A person is the only entity in need of life in an environment but also capable of changing and transforming the environment in which he/she lives. In this sense, human beings are both restricted to and dependent on the environment, and independent from the environment and transformative forces. The person who is dependent on the environment is the least harmful to the environment but when he has tried to transform the environment in which he exists, he has started to destroy it and declare himself to be the king of his surroundings. With the technological developments, man has begun to rise against the neighborhood which he feels weak against and has begun using and exploiting the environment as he wills with the power given to him by the technology. However, environment has a value of its own and this value is ignored by mankind. Primary objective of environmental ethics, which is a sub-domain of ethics, is to teach to show respect for the present value of the environment while dealing with the problems in the environment. It is a century when the views on the morality are separated from each other only by human-human relations, and we witness people who are equipped with forces such as globalization, industrialization, and the development of technology turn into a Frankenstein and break the bond of animal-human, plant-human, nature-human relationship. However, new approaches take into account the fact that it is not possible to take human beings independent of nature, and therefore we can think of it in the context of an organic and inorganic world wherever we think about it. For this reason, we need moral imperatives to show respect for our environment or to appreciate the value of our environment. Environmental ethics is the ethical understanding which deals with the purpose, content, and scope of every action we develop against environment in three types of relationships: human-centered, living being-centered, and environment-centered. That is to say, there has now been an evolution from the ethical conception that deals only with the happiness of man to the environment and living-centered ethical conception. In this study, it will be tried to explain why it is a necessary value to maintain the evolution from human-centered ethical conception and some approaches to environmental ethics will be provided. Key words: Ethics, Environment, Living being, Human.
637
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Geleneğimizde Önemli Bir Değer Olarak Hoşgörü Kavramının Önemi Nurten KİRİŞ YILMAZ1,*, Hülya YALDIR2 Süleyman Demirel Üniversitesi, Isparta, Türkiye 2 Pamukkale Üniversitesi, Denizli, Türkiye *Sorumlu yazar e-posta:
[email protected]
1
Özet Türkiye’de toplumun hemen her kesiminde ailelerde çocuğa öğretilen temel bir değer vardır. Bu değer, önce ailede ebeveynler tarafından verilir, ardından okul öncesi eğitimde sonra ilkokul çağlarında değerler eğitimi başlığı altında ele alınır. Bizim kültürümüz için hoşgörü kavramı, hoşgörülü olmak düşüncesi büyük öneme sahiptir. Kültürümüzün önemli isimlerinden Mevlana “hoşgörü de deniz gibi ol!” öğüdünde bulunurken, Yunus Emre “yaratılanı hoş gördük, yaratandan ötürü” demiştir. Pek çok âlim, düşünür, din adamı hoşgörünün iyi ve yüce bir erdem olduğu konusunda hem fikirdir. Kültürümüzde sürdürülmekte olan bir değer olarak kabul görmekte olan hoşgörü kavramına bu sebeple daha detaylı bakarak içeriğinin ne olduğunu ortaya koymanın uygun olacağı kanaatindeyim. Hoşgörü kavramının etimolojisine baktığımızda Farsça “hoş” sıfatından ve Türkçe “görmek” fiilinden türemiş, anlam itibariyle olumlu bir değere sahip bir kavram olduğunu görmekteyiz. Müsâmaha ve Arapça tesâmuh kelimeleriyle aynı anlamda kullanılmaktadır. Batı dillerinde, Fransızca'sı, tolérance; İngilizce'si tolerance kelimeleriyle karşılanmıştır. Hoşgörü kavramı tolerans kavramı ile aynı anlamda kullanılmaktadır. Ama hoşgörü kavramının süreç içerisinde aldığı değere baktığımızda toplumların ekonomik, sosyal, ahlaki ve hatta dini yaklaşımlarıyla daha alakalı olduğu ve tolerans kavramının anlamından koptuğu görülmektedir. Bu nedenle bu ayrımında ele alınması gerekmektedir. Hoşgörü, öncelikle birden fazla insanı şart koşar. İnsanlararası ilişkide ortaya çıkan, kişilerin değerlerini toplum içindeki konumlarının (ekonomik, sosyal, psikolojik) belirlediği bir kavram olan hoşgörünün, dilimizde daha çok karşıdakini affetme, kusura bakmama, önemsememe, daha sosyal anlamda toplum içindeki bireyleri daraltmamama, saygı duyma, saygılı olma, farklılıkları kabul etme, kişilerin özel alanına girmeme, haklarına saygı duyma ve günümüzde sıklıkla kullanılan bir kavram olarak “medeni olma” ile karşılandığı görülmektedir. Bu anlamda hoşgörü insanlararası ilişkileri düzenlediği gibi toplumun içinde ve toplumlararasında barışında temelini kuran bir değerdir. Öte yandan kültürel değerleri korumak, toplumun her kesimindeki yapılara, örneğin aile içinde ebeveynlerin ve çocukların konumunun belirlenmesine, kişilik haklarına saygı gösterilmesine, kurumlar içinde işleyişin düzenlenmesine, din anlayışlarına saygı duyularak dini inançların özgürce devam edebilmesine de yardım eden, merkezi öneme sahip bir kavramdır. Sürdürülmesi gereken bir değer olarak hoşgörü geleneğimizin önemli bir parçasıdır.
638
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Bu anlamda çalışmamızda toplumun, kültürün, geleneklerin temelinde yer alan önemli bir değer olan hoşgörü fikrinin olumlu ve olumsuz yönleri ele alınarak Batı dillerindeki karşılıklarına göre içeriği, kapsamı, farklılıkları, açmazları ortaya konularak önemi tespit edilmeye çalışılacaktır. Anahtar kelimeler:
Hoşgörü(tolerans), Etik, İnsan, Değer, Erdem.
639
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Importance Of The Concept Of Tolerance As An Important Value In Our Tradition Nurten KİRİŞ YILMAZ1,*, Hülya YALDIR2 Süleyman Demirel Üniversitesi, Isparta, Türkiye 2 Pamukkale Üniversitesi, Denizli, Türkiye *Responsible author e-mail:
[email protected] 1
Abstract In Turkey, in almost every segment of society, there is a fundamental value that is taught to children in families. This value is first given by the parents in the family, then in pre-school education and then in the elementary school years, these values are handled under the title of values education. The concept of leniency and the notion of being tolerant have great importance for our culture. While Mevlana, one of the most important names in our culture, advised that “Be like the sea in indulgence”, “We tolerate the creatures for the sake of the Creator” said Yunus Emre. Many scholars, thinkers, clergymen agree that tolerance is a good and supreme virtue. I think that it is appropriate to reveal what the content is by looking more closely at the concept of tolerance which is accepted as a sustained value in our culture. When we look at the etymology of the concept of tolerance, we see that it is a concept derived from the Persian adjective “hoş" and the Turkish verb “görmek", which is meaningfully having a positive value. It is used in the same denotation as Musâmah and Arabic tesâmuh words. In western languages, it corresponds to “tolerance” in French; and “tolerance” in English. The concept of indulgence is used in the same sense as the concept of tolerance. But when we look at the value that the concept of indulgence takes in time course, it is seen that it is more related with economic, social, moral and even religious approaches of societies and that it detaches from the meaning of the concept of tolerance. For this reason, this distinction needs to be considered. Tolerance, first of all, requires more than one person. Occurring in human relations, tolerance, which is a concept that the values of people are determined by their positions in the society (economic, social, psychological), corresponds more in our language to forgiving the other person, pardoning, paying no mind, in a more social meaning not bothering an individual in a society, respecting, being respectful, accepting diversity, not being in the private sphere of people, respecting their rights, and being "civilized" as a frequently used concept today. In this sense, tolerance is a value that both regulates human relations in society and underlies the societal and inter-societal peace. On the other hand, tolerance is a concept with centralized importance which helps structures in every part of society, for instance the determination of the position of parents and children in the family, showing respect for personality rights, coordination of operations within institutions, continuing religious beliefs freely by respecting religious understandings. Tolerance as a value to be sustained is an important part of our tradition. In this sense, in our study, the positive and negative aspects of the idea of tolerance, which is an important value on the basis of society, culture and traditions,
640
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
will be studied and the content, scope, differences and dilemmas will be revealed according to their equivalents in the Western languages. Key words:
Tolerance, Ethics, Human, Value, Virtue.
641
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Türkiye’de Güneş Güç Kulesi Potansiyeli ve Uygulamaları Okan BİNGÖL1,*, Onur Mahmut PİŞİRİR2, Burçin ÖZKAYA3 Süleyman Demirel Üniversitesi, Isparta, Türkiye Süleyman Demirel Üniversitesi, Isparta, Türkiye 3 Süleyman Demirel Üniversitesi, Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected] 1 2
Özet Günümüzde ilerleyen teknoloji ve artan nüfus ile birlikte enerji ihtiyaçlarını karşılamak zorlaşmıştır. Fosil yakıtlar ile elde edilen enerji çevreye önemli zararlar vermektedir. Fosil yakıtların geri dönüşümsüz olması ve bilinçsizce tüketilmesi ile alternatif enerji kaynaklarına eğilim son yıllarda artmıştır. Dünya’da en çok tercih edilen yenilenebilir enerji kaynaklarından biri olan Güneş, ülkemizde de oldukça yüksek bir kullanım potansiyeline sahiptir. Ülkemiz coğrafi konumu ve güneş enerjisi açısından birçok ülkeye göre daha avantajlıdır ve birçok bölgesinin yıllık güneşlenme süreleri oldukça uzundur. Yeni teknolojilerle birlikte güneşten yararlanmak için geliştirilen yöntemler daha etkili olmaktadır. Güneş Güç Kuleleri son yıllarda geliştirilen rekabetçi, yüksek teknolojili ve ekonomik bir enerji santrali çözümüdür. Ülkemizin enerji bakımından dışa bağımlılığını azaltacak potansiyele sahiptir. Bu çalışmada Güneş Güç Kulelerinin yapısı, çalışma prensibi, kurulum maliyetleri, güç kullanımı ve bir santralin üreteceği güç kapasitesi incelenmiştir. Ülkemizin bu yeni teknoloji için potansiyeli incelenmiş ve karşılaştırmalar yapılmıştır. Güneş Güç Kulesi kurulabilecek alanlar belirtilmiş ve incelenmesi yapılmıştır. Dünya’da kurulan örneklerinden karşılaştırmalar yapılmıştır. Halen hazırda ülkemizde kurulmuş olan Güneş Güç Kuleleri ile ilgili de inceleme yapılmış ve santral yapısı açıklanmıştır. Türkiye’de güneş enerjisi potansiyelinin elektrik üretimi için yatırımcılara yardımcı olacak kaynaklar belirtilmiştir. Güneş Güç Kulelerinin çevresel yararlarının yanında ekonomik yararları da belirtilmiş ve önemi vurgulanmıştır. Anahtar kelimeler: Güneş Güç Kuleleri, Yenilenebilir enerji, Enerji santralleri.
642
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Potential and Implementations of Solar Power Towers in Turkey Okan BİNGÖL1,*, Onur Mahmut PİŞİRİR2, Burçin ÖZKAYA3 Süleyman Demirel University, Isparta, Turkey Süleyman Demirel University, Isparta, Turkey 3 Süleyman Demirel University, Isparta, Turkey *Responsible author e-mail:
[email protected] 1
2
Abstract Today, supplying the needs of energy gets difficult with the advanced technology and growing population. The energy obtained from fossil fuels damages environment sunstantially. That fossil fuels can not be recycled and their unconcious use increase the tendencey of alternative energy sources. The Sun, which is chosen mostly as one of the reneawable energy sources, made use of by many in our country. With regard to geographical position and solar power, our country is advantageous when compared to many other countries and annual duration of sunshine is quite long in many regions. Methods developed to benefit from the Sun become more efficient with the new technologies. Solar power towers advanced recently are powerplant solution which is challenging, hi-tech and economical. These power towers can decrease the external dependence of our country in terms of energy. In this study, the structure of Solar Power Tower, working principle, setup cost, use of power and the capacity which a power plant generates analyzed. Fort his new technology, the potency of our country is examined and comparisons are made. The fields, which solar power towers can be installed, are indicated. Its samples are compared to others installed around the World. Solar power towers installed in our country are examined and the structure of power plant is explained. To generate electricity, the potency of Turkey’s solar power is asserted for foreign investors. In addition to environmental benefits, solar power towers’ economical benefits are also pointed out. Key words: Solar Power Towers, Renewable energy, Power plants.
643
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürdürülebilir Çevre için Binalarda Yalıtım Uygulamasının Etkisi Okan KON1,* Balıkesir Üniversitesi Mühendislik Fakültesi Makine Mühendisliği Bölümü Çağış Kampüsü Balıkesir, Türkiye * Sorumlu yazar e-posta:
[email protected]
1
Özet Günümüzde, ülkemizde enerjinin önemli bir bölümünü binalarda tüketilmektedir. Tüketilen bu enerjinin azaltmanın yani enerji tasarrufunun en önemli yolu binaların yalıtılmasıdır. Çalışmada, aralık 2013’te yenilenen Türk Standardı TS 825’e göre beş iklim bölgesi için beş farklı şehir seçilmiştir. Bu şehirler için binaların dış duvarlarında artan yalıtım kalınlığı ile yakıt tüketimi ve buna bağlı CO2 ve SO2 emisyonu azalımı araştırılmıştır. Bilindiği gibi CO2 ve SO2 emisyonları çevre kirliliğine sebep olmaktadır. Sürdürülebilir bir çevre için yaşadığımız binaların enerji tüketimini ve dolayısıyla atmosfere salınan emisyonların azalmasını sağlamamız çok önemlidir. Yalıtım malzemesi olarak ekspande polistiren (EPS), ekstrüde polistren (XPS), cam yünü ve taş yünü düşünülmüştür. Yakıt olarak doğal gaz, kömür, fuel-oil LPG kullanılmıştır. CO2 ve SO2 emisyonu için yakıtların yanma denklemlerinden yararlanılmıştır. Hesaplamalar, temel sıcaklık ile günlük en yüksek ve en düşük sıcaklık farklarının toplamı olan derece-gün değeri kullanılarak yapılmıştır. Anahtar kelimeler: Binalarda Yalıtım, Sürdürülebilir çevre, emisyon.
644
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Impact of Insulation Implementation in Buildings For a Sustainable Environment Okan KON1,* 1
Balikesir University Engineering Faculty Department of Mechanical Engineering Cagis Campus Balikesir, Turkey * Responsible author e-mail:
[email protected]
Abstract Today, a significant part of the energy in Turkey is consumed in the buildings. The most important way of reducing the energy consumed is the insulation of buildings. In the study, five different cities were selected for five climate regions according to Turkish Standard TS 825 renewed in December 2013. For these cities, increased insulation thickness, fuel consumption and associated CO2 and SO2 emission reductions on the exterior walls of buildings have been investigated. As is known, CO2 and SO2 emissions cause environmental pollution. For a sustainable environment, it is very important to be able to reduce energy consumption of buildings and thus emissions returning atmosphere as well. Extruded polystyrene (EPS), extruded polystyrene (XPS), glass wool and stone wool were considered as insulation materials. Natural gas, coal and fuel-oil LPG were used as fuel. The combustion equations of fuels were used for CO2 and SO2 emissions. Calculations were made by using the reference temperature plus the degree-day value, which is the sum of the daily maximum and minimum temperature differences. Key words: Insulation in buildings, Sustainable environment, emissions.
645
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Ekolojik Sürdürülebilirlik Kapsamında Binalarda Kullanılan Çevre Dostu Isı Yalıtım Malzemeleri ve Bunlara Bağlı Yenilenebilir Yakıt Tüketimi Okan KON1,* Balıkesir Üniversitesi Mühendislik Fakültesi Makine Mühendisliği Bölümü Çağış Kampüsü Balıkesir, Türkiye * Sorumlu yazar e-posta:
[email protected]
1
Özet Çalışmada, yeni geliştirilen özellikle bitki ve tekstil atığı malzemelerden üretilen ısı yalıtım malzemeleri ve bunların bina dış duvarlarında kullanılması ile yenilenebilir yakıt tüketimi hesabı yapılmıştır. Hesaplamalar için Balıkesir ili seçilmiştir. Balıkesir ili Türk Standardı TS 825’e göre ikinci iklim bölgesinde yer alan bir ilimizdir. Balıkesir ilinde yenilenebilir yakıt olarak kullanılan jeotermal ve biokütle olarak zeytin atığı (pirina) tüketimi hesaplanmıştır. Balıkesir, ülkemizde jeotermal konut ısıtmada ilk uygulamanın olduğu ildir. Bugün Gönen, Edremit, Bigadiç, Sındırgı gibi ilçelerinde önemli jeotermal kaynaklar bulunmaktadır Bunların bir bölümü de konut ısıtmada kullanılmaktadır.. Ek olarak Balıkesir ülkemizde önemli zeytin üreten iller arasında yer almaktadır. Özellikle Havran, Edremit, Burhaniye ve Ayvalık gibi ilçelerinde yüksek miktarda zeytin üretimi mevcuttur. Zeytin atığı da yakıt olarak kullanılmaktadır. Kullanılan yalıtım malzemeleri, alışılmış yalıtım malzemelerden farklı olarak muz ve polipropilen, küspe, mısır koçanı, pamuk (sapları), hurma ağacı, durian, palmiye yağı, pekan, ananas yaprakları, kamış veya saz, pirinç, sansevieria elyaf, ayçiçeği, saman balya, pamuk, geri dönüşümlü cam, geri dönüşümlü pet, geri dönüşümlü tekstil, geri dönüşümlü tekstil lifleri yapılan malzemelerdir. Hesaplamalarda, bina dış duvarı olarak sandviç duvar ve 3 ile 5 cm kalınlığında yalıtım malzemeleri kullanılmıştır. Hesaplamalar, temel sıcaklık ile günlük en yüksek ve en düşük sıcaklık farklarının toplamı olan derece-gün değeri kullanılarak yapılmıştır. Anahtar kelimeler: Yalıtım malzemeleri, jeotermal, pirina, ekolojik sürdürülebilirlik.
646
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Environment-Friendly Heat Insulation Material Used in The Scope of Ecological Sustainability and Renewable Fuel Consumption Related to These Factors Okan KON1,* 1
Balikesir University Engineering Faculty Department of Mechanical Engineering Cagis Campus Balikesir, Turkey * Responsible author e-mail:
[email protected]
Abstract In the study, newly developed heat insulation materials, especially produced from plants and textile materials, and renewable fuel consumption accounts were performed through their usage on external walls of the building. Balikesir province was selected for calculations. Balıkesir province is a province located in the secondary climate region according to Turkish Standard TS 825. In Balıkesir province, consumption of olive oil (pyri) as geothermal and biomass used as renewable fuel was calculated. Balıkesir is the first national application in terms of geothermal housing heating. Today, there are some important geothermal resources in the districts like Gönen, Edremit, Bigadiç, Sındırgı. Some of them are also used in building heating. In addition, Balıkesir is one of the important olive producing provinces in our country. Especially in the Havran, Edremit, Burhaniye and Ayvalık, there is a high amount of olive production. Olive waste is also used as fuel. Unlike conventional insulation materials, the insulation materials utilized are made of bananas and polypropylene, pulp, corncobs, cotton (its stalks), palm tree, durian, palm oil, pecan pineapple leaves, reed or reed, rice, sansevieria fibers, sunflower, Cotton, recycled glass, recycled PET, recycled textiles, recycled textile fibers made of materials. In the calculations, a sandwich wall was used as the outer wall of the building, while 3 to 5 cm thick material was used as insulation material. Calculations were made by using the reference temperature plus the degree-day value, which is the sum of the daily maximum and minimum temperature differences. Key words: Insulation materials, geothermal, pyri, ecological sustainability.
647
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
İstanbul-Silivri Muratçeşme Alanında Tarihi Çeşme İle Olası Kazı Yeri Arasındaki Bağlantının Jeofizik Yöntemlerle Araştırılması Okan TEZEL1,* İstanbul Üniversitesi, Mühendislik Fakültesi, Jeofizik Mühendisliği Bölümü, Avcilar-İstanbul,Türkiye * Sorumlu yazar e-posta:
[email protected]
1
Özet Arkeolojik aramalarda jeofizik; yoklama kazılarından önce başvurulan ve yüzeyden gözle görülemeyen olası gömülü kalıntıların; yer, biçim, derinlik vb özelliklerini üç boyutta veren bir yöntemdir. Bunun için öncelikle aranan yapının özellikleri ve ölçülebilecek fiziksel parametre dikkate alınarak bir jeofizik yöntem belirlenir. Böylece arkeolojik çalışmalar yönlendirilerek kalıntılar bozulmadan, daha çabuk ve daha düşük maliyetle çıkarılabilmektedir. Burada Jeofiziğin amacı; araştırma programının daha iyi yönlendirilerek zaman ve ekonomik faktörlerin en uygun şekilde kullanılmasına yardımcı olmaktır. Yapılmış olan bu çalışmada İstanbul ili Silivri ilçesi Murat Çeşme mevkiinde tarihi çeşme ile kazı yapılmak istenen alan arasında çeşmenin devamının olup olmadığı araştırılmıştır. Yapılan çalışma sonunda olası kazı alanıyla çeşme arasındaki alanda çeşmenin devamının olmadığı belirlenmiş ve yapılan kazı sonrasında da durumun böyle olduğu görülmüştür. Anahtar kelimeler: Arkeoloji, Jeofizik, Yer Radarı, Özdirenç, Görüntüleme.
648
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Geophysical Investigation of Connection Between Historical Fountain And Excavation Area With Geophysical Techniques In Istanbul-Silivri Murat Cesme Okan TEZEL1,* 1
Istanbul University, Faculty of Engineering, Department of Geophysics Engineering, Avcilar-Istanbul, Turkey * Responsible author e-mail:
[email protected]
Abstract Geophysics in archaeological researches is a method that applied before the polling excavation. It gives that the location, depth and features in three dimensions of the subsurface ruins which are possibly buried and not able to be observed. In this situation a geophysical method is firstly determined by taking into consideration the properties of the searched structure and the physical parameters that can be measured. Thus, archaeological studies are guided by geophysics. With this way relics can be taken out without deterioration, faster and with lower cost. Here is the purpose of geophysics; to help the research program to be better guided and to optimize the use of time and economic factors. In this study, it was researched whether there is a continuation of historic fountain through the excavation area in Murat Cesme of Silivri district of Istanbul province. After the geophysical study, it was determined that there was no continuation of the historic fountain through the excavation area and it was observed that the situation was the same after the excavation. Key words: Archeology, Geophysics, GPRS, Resistivity, Tomography.
649
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Zaman Ortamı IP Yöntemiyle Jeotermal Arama Okan TEZEL1,* 1
İstanbul Üniversitesi, Mühendislik Fakültesi, Jeofizik Mühendisliği Bölümü, Avcilar-İstanbul, Türkiye * Sorumlu yazar e-posta:
[email protected]
Özet Jeotermal kaynak; yerkabuğunun çeşitli derinliklerinde birikmiş ısının oluşturduğu kimyasallar içeren sıcak su, buhar ve gazlardan oluşmaktadır. Bu kaynağın sıcaklığı sürekli 200C’den fazladır. Çevresindeki normal yeraltı ve yer üstü sularına oranla daha fazla erimiş mineral ve çeşitli tuzlar içermektedir. Jeotermal enerji ise jeotermal kaynaklardan elde edilen; yeni, yenilenebilir, sürdürülebilir, tükenmeyen, ucuz, güvenilir, çevre dostu bir enerji türüdür. Jeotermal ortamlarda bulunan sıcak su, buhar, erimiş mineral ve çeşitli tuzlar ortamı iyi bir iletken haline getirirler. Dolayısıyla bu tip ortamlarda özdirenç değerleri düşük olur. Elektrokimyasal kökenli bir yöntem olan zaman ortamı IP ölçüleriyle elde edilecek yüksek değerli yüklenebilirlik değerleri de bu olguyu destekler. Türkiye Balıkesir Güre’de, şu anda işletilmekte olan jeotermal kaynaklar üzerinde, yapılan bu çalışmada zaman ortamı IP yöntemi uygulanmıştır. Kullanılan cihazın özelliği ile aynı anda özdirenç ve yüklenebilirlik değerleri elde edilmiştir. Beklentiler doğrultusunda düşük değerli özdirenç ve yüksek değerli yüklenebilirlik değerlerinin jeotermal kaynak üzerinde uyarlı oldukları izlenmiştir. Ayrıca bu izlenimlerin sondaj verileriyle de örtüştükleri görülmüştür. Anahtar kelimeler : Jeotermal, zaman ortamı IP, yüklenebilirlik, özdirenç.
650
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Geothermal Exploration By Time Domain IP Okan TEZEL1,* 1
Istanbul University, Faculty of Engineering, Department of Geophysical Engineering, Avcilar, Istanbul,Turkey * Responsible author e- mail:
[email protected]
Abstract Geothermal energy is heat derived from the earth. It is the thermal energy contained in the rock and fluid (that fills the fractures and pores within the rock) in the earth's crust. These resources are always at a temperature higher than 20°C. Geothermal energy requires no fuel, and is therefore virtually emission free and independent of fluctuations in fuel cost. Since a geothermal power plant doesn't rely on transient sources of energy, unlike, for example, wind turbines or solar panels, its capacity factor can be quite large. Induced polarization (IP) results at geothermal regions show prominent, extended low resistivity zones. Environmental-IP methods can assist in the assessment of the acid generating potential of waste rock and tailings from mine operations. Resistivity can be used to map contamination plumes. Resistivity and chargeability values were determined using the IP method on geothermal resources in Balikesir Güre (Turkey). In this study we found low resistance values and high chargeability values at the geothermal resource. Finally drilling and IP results were correlated to verify our findings. Key words : Geothermal, time domain IP, chargeability, resistivity.
651
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürdürülebilir Kalkınmada Ekolojik Sanayi Bölgelerinin Rolü: Ülke Örnekleri ve Türkiye İçin Değerlendirme Onur SUNGUR1,* Mehmet Akif Ersoy Üniversitesi, İİBF İktisat Bölümü, Burdur / TÜRKİYE * Sorumlu yazar e-posta:
[email protected]
1
Özet Sanayi sektörü ve sanayileşme, kalkınma sürecinde önemli bir rol oynamaktadır. Bununla birlikte, hızlı sanayileşmenin, iyi yönetilemediği takdirde bazı olumsuz çevresel etkileri olması muhtemeldir. Bu olumsuz etkilerin başında da tükenebilir kaynakların hızla tüketilmesi ve çevre kirliliği gelmektedir. Bu bakımdan, sanayileşmenin çevresel zararlarının en aza indirilmesi, atıkların yönetimi, hava-sutoprak kirliğinin önlenmesi, sürdürülebilir kalkınma açısından oldukça önem arz etmektedir. Yoğun endüstriyel bölgelerin ve sanayi komplekslerinin çevresel zararlarının en aza indirilmesi ve atıkların geri kazanımı yönünde çabalar ve tartışmalar, ekolojik sanayi bölgesi (eco-industrial park) kavramını gündeme getirmiştir. Ekolojik sanayi bölgeleri, sanayi bölgesinde yer alan firmaların, atıkların azaltılması ve kirliliğin önlenmesi, kaynakların (bilgi, materyal, su, enerji, altyapı ve doğal kaynakların) paylaşımı amacıyla birbirleriyle ve yerel topluluk ile işbirliği içerisinde olduğu ve böylece sürdürülebilir kalkınmanın amaçlandığı sanayi bölgeleri olarak tanımlanmaktadır. İlk örneği Danimarka’da görülen ekolojik sanayi bölgeleri, son zamanlarda Çin başta olmak üzere diğer ülkelerde de giderek yaygınlaşmaktadır. Bu çalışmanın amacı; sanayi bölgelerinin çevresel zararlarının önlenmesi/en aza indirilmesi ve sürdürülebilir kalkınma açısından önemli bir uygulama olan ekolojik sanayi bölgesi kavramının ele alınmasıdır. Çalışma kapsamında, Danimarka ve diğer ülkelerdeki eko-endüstriyel park örnekleri sunulacaktır. Çalışma sayesinde, ekolojik sanayi parklarının çevresel sürdürülebilirlik açısından öneminin ortaya koyulması, aynı zamanda diğer ülke deneyimlerinden elde edilen bulgular doğrultusunda Türkiye için birtakım öneriler ve politika çıkarımları ortaya koyulması mümkün olacaktır. Anahtar kelimeler: Sürdürülebilir Kalkınma, Ekolojik Sanayi Bölgeleri, Eko-Endüstriyel Parklar.
652
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Role of Ecological Industrial Zones in Sustainable Development: Country Examples and Evaluation for Turkey Onur SUNGUR1 1
Mehmet Akif Ersoy University, Department of Economics, Burdur / TURKEY * Responsible author e-mail:
[email protected]
Abstract The industrial sector and industrialization play an important role in the economic growth and development process. Nevertheless, it is possible that rapid industrialization may have some adverse environmental effects. The most important of these adverse effects is the rapid consumption of exhaustible resources and environmental pollution. From this point of view, it is very important to minimize the environmental damages of industrialization, to manage waste, to prevent air-water-soil pollution for sustainable development. Debates and efforts to reduce the environmental damage of industrial areas and industrial complexes and to recover waste have brought the concept of eco-industrial parks to the agenda. Eco-industrial zones (or eco-industrial parks) can be defined as industrial parks which is aimed sustainable development through cooperation between businesses and local community to reduce waste and pollution, share resources (information, materials, water, energy, infrastructure and natural resources). The first example of Eco-Industrial Park can be seen in Denmark, and have recently become increasingly widespread in other countries, especially in China. The purpose of this study is to mention the concept of the ecological industrial zone which is an important application in terms of sustainable development and to prevent /minimize the environmental damage of industrial zones. In this context, examples of eco-industrial parks especially in Denmark and other countries will be presented. Through the study, it will be possible to put forward the importance of ecological industrial parks in terms of environmental sustainability and at the same time to make suggestions and policy implications for Turkey through the findings from other countries’ experiences. Key words: Sustainable Development, Ecological Industrial Zones, Eco-Industrial Parks.
653
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Mevcut Kütüphane Mekanlarının Yaşam Boyu Öğrenme Ortamları Olarak Yenilenmeleri Anadolu Üniversitesi, Üniversite Kütüphanesi Örneği Özge KANDEMİR1,*, Emre UYSAL1 Mimarlık ve Tasarım Fakültesi İç Mimarlık Bölümü İç Mimarlık Anasanat Dalı * Sorumlu yazar e-posta:
[email protected]
1
Özet Bugün dünyada kütüphaneler; çalışma, araştırma, iş ve boş zamana ilişkin ihtiyaçları karşılamaya yönelik ortam ve olanaklar sağlayan kamusal alanlar olarak hizmet vermektedir. Kütüphaneler gerek yeni, gerekse mevcutta işlevini sürdüren mekânsal kurgular içerisinde değişen toplumsal yaşama adapte olarak varlığını devamettirmenin yollarını aramaktadır. Değişen eğitim yaklaşımı hedefin, kendi başlarına yaşam boyu öğrenme becerisine sahip bireyler yetiştirebilmek olduğuna dikkat çekmektedir. Bu durum yeni yaşam boyu öğrenme ortamlarının yaratılmasına ve de mevcut ortamların geliştirilmesine yönelik ihtiyacı ortaya koymaktadır. Yaşam boyu öğrenme ortamı yaratmak, Feira Tebliği’nde ifade edildiği gibi, insana ve bilgiye daha çok yatırım yapma, dijital okuryazarlık da dâhil temel bilgi ve becerilerin kazanılmasını teşvik etme, esnek ve yenilikçi öğrenme fırsatlarını genişletmeyi gerektirmektedir. Bu doğrultuda kütüphaneler, yaşam boyu öğrenmenin hedeflendiği ortamlar olarak kurgulanmaktadır. IFLA’nın ifadesiyle: “Bugün kütüphanelerin görevi, kullanıcılar tarafından erişilemeyen bilgi ve kaynakların kilidini açmaya odaklanmak ve bu içeriği kendilerine 7/24 sunmanın en uygun yollarını bulmaktır”. Bu çerçevede mevcut kütüphanelerin kullanıcı ihtiyaçlarına ve çağdaş yaşamın gerektirdiği yenilik ve çeşitliliğe imkan tanıyan yaklaşımlarla yeniden kurgulandıkları görülmektedir. Burada, bilgiye ve kaynaklara engelsiz erişimin tüm fiziksel ve zihinsel yollarla sağlanmaya çalışılması, elde edilen bilginin değerlendirilmesi ve iletilmesine yönelik fırsatların yaratılması önemlidir. Öğrenme deneyimleri içinde bulunmaya yönelik ele alınan kullanıcı deneyimi ise; katılımcılığın, yaratıcılığın teşvik edilip etkinleştirilmesinde, fikirlerin paylaşılıp yayılmasının olanaklı hale getirilmesinde ve de bu yönde ortam ve programların oluşturulmasında temel çıkış noktasıdır. Tüm bu gerekliliklerin karşılanmasında kütüphaneler, farklılaşan amaçlar ve kullanıcı gruplarıyla çeşitli kategoriler içerisinde değerlendirilmektedir. Bunlardan biri olan Üniverite kütüphaneleri, parçası oldukları eğitim kurumunun hedeflerine hizmet eden bir yapıda ele alınmaktadır. Bu çerçevede çalışmanın örneklemini Anadolu Üniversitesi kütüphanesi oluşturmaktadır. Kütüphane, mevcutta kurumsal kimliğin ve belleğin parçası olup, özgün mimarisi ve zengin koleksiyonuyla toplumun her kesiminden kullanıcı gruplarına hizmet vermektedir. Bu yapının, çağdaş yaşam biçiminin gereksinimlerini karşılayabilmesine yönelik geliştirilen eleştirel bakış ve İç Mimarlık 3. Sınıf öğrencileriyle geliştirilen öneriler, mevcut kütüphane yapılarına bakma biçimimizi değiştirmeye yöneliktir. Açığa çıkan çözüm önerileri, kütüphanedeki mevcut 654
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
mekânların çağdaş yaklaşımlar doğrultusunda yenilenmelerine “renovasyonlarına” yönelik birer sorgulama alanı olarak ortaya konulacaktır. Anahtar kelimeler: Yaşam Boyu Öğrenme, Çağdaş Kütüphane Mekânları, Kullanıcı Deneyimi, Yenileme (Renovasyon) Çalışmaları.
655
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Renovation of Existing Library Spaces as A Life Long Learning Environment Anadolu University Library Example Özge KANDEMİR1,*, Emre UYSAL1 Mimarlık ve Tasarım Fakültesi İç Mimarlık Bölümü İç Mimarlık Anasanat Dalı *Sorumlu yazar e-posta:
[email protected]
1
Abstract Today, libraries serve as a public space that provide environments and facilities to meet the needs of work, research, work and leisure in the world. The libraries look for ways to maintain their existence as adapting to changing social life, both within the new, and in the spatial constructs that continue to function in the present. The changing educational approach emphasizes that the goal is to be able to raise individuals with lifelong learning skills on their own. This situation puts forward the need for the creation of new lifelong learning environments and the development of existing environments. Creating a lifelong learning environment requires investing more people and information, promoting the acquisition of basic knowledge and skills, including digital literacy, and expanding flexible and innovative learning opportunities, as expressed in the Feira Communiqué. In this direction, libraries are designed as environments where lifelong learning is aimed at. By the expression of IFLA “The library’s role is to focus on unlocking information and resources that are not available to users, and to find the most convenient ways to deliver this content to them, 24 by 7”. In this context, it is seen that the existing libraries are re-edited with user needs and approaches that allow for the innovation and diversity required by contemporary life. It is also important to try to provide unhindered access to information and resources through all physical and mental ways, and to create opportunities for the evaluation and communication of acquired knowledge. The user experience to be involved in learning experiences is the main starting point for participation, creativity is encouraged and activated, making it possible for ideas to be shared and spread, and in this context creating environments and programs. In fulfilling all these requirements, libraries are evaluated in different categories with differentiated purposes and user groups. One of these, University Library is part of a structure that serves the goals of the educational institution to which they belong. In this framework, the sample of study is the Library of Anadolu University. The library is part of the institutional identity and memory of the present and it serves the user groups of every part of the society with its unique architecture and rich collection. A critical overview of this building in order to meet the needs of the contemporary lifestyle and the suggestions developed by the 3rd year students of Interior Architecture are intended to change the way we look at existing library structures. The proposed solution will be put forward as a field of inquiry for "renovations" of renewal of existing spaces in the library in line with contemporary approaches. Key words: Lifelong Learning, Contemporary Library Spaces, User Experience, Renovation Studies.
656
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Mülteci Çocukların Eğitim Engelleri Özge Ruken ERGÜN¹,* , H. Eylem KAYA² ¹Süleyman Demirel Üniversitesi Sosyoloji Bölümü Yüksek Lisans Öğrencisi, Isparta, Türkiye ²Süleyman Demirel Üniversitesi Sosyoloji Bölümü Öğretim Üyesi, Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected]
Özet Tarihsel süreç içerisinde meydana gelen göç hareketleri dünyanın bugünkü nüfus dağılımının, sosyo-ekonomik yapısını ve kültürel gelişiminin şekillenmesinde daima belirleyici bir unsur olmuştur. Bununla birlikte göç olgusu, günümüzde hızını olağanüstü derecede artırmış ve geçmişe oranla daha da kitleselleşmiş bir hal almıştır. Uluslararası arenada da göç hareketleri bakımından Türkiye giderek önem kazanan bir ülke konumuna gelmiştir. Eski çağlardan beri uluslararası göç hareketlerinde bir kaynak alanı olarak nitelendiren Türkiye coğrafyası günümüzde hem transit göçler için bir önemli bir köprü haline gelmiş hem de aktif olarak göç almaya başlamıştır. 2011’de Suriye’de başlayan olaylar ise giderek savaş ve şiddet ortamına dönüşmüş ve 5 milyona yakın insan can güvenliği için komşu ülkelere sığınmak zorunda kalmıştır. Türkiye’nin “açık kapı” politikası sayesinde 3 milyonu aşkın Suriyeli de Türkiye’ye sığınmıştır. Suriye’deki savaşın halen devam etmesi ve ülkedeki yaşam alanlarının yok olması nedeniyle, Türkiye’ye sığınan Suriye vatandaşlarının ülkelerine uzun bir süre daha dönemeyecekleri öngörülmektedir. Suriyeli mültecilerin yaklaşık yarısından fazlasının eğitim çağında olduğu bilinmektedir. Bu nedenle can güvenliği, barınma, gıda, giyinme gibi birincil ihtiyaçlarının yanında eğitim ihtiyacı ve sorunları da gün yüzüne çıkmaktadır. 2011 yılı itibariyle Suriyeli mülteci çocuklar için mülteci kamplarında dizayn edilen eğitim sistemleri 2013 yılı itibariyle farklılaşarak kamp dışında eğitim sistemi haline dönüşmeye başlamıştır. Bahsi geçen bu uygulama beraberinde birçok sorunu ortaya çıkarmıştır. Bu sorunların başında kamuoyunun yeteri kadar aydınlatılmaması gelmektedir. Olağanüstü koşullarda Suriyeli mülteci çocukların eğitimi için devlet tarafından belirlenen Suriyeli mülteci öğrencilerin bakanlığa bağlı resmi ve özel okullara kayıtları konusunda daha kapsamlı çalışmalar yapılması, ‘’Göç ve Acil Durum Eğitim Daire Başkanlığı" adı altında yeni bir başkanlığın kurulması, eğitimlerine ara vermiş veya hiç başlayamamış Suriyeli mülteci çocukların okullara kayıtlarının yapılması ve eğitim ortamlarına uyumlarının sağlanmasında suçlama, dışlama ve ayrıma maruz kalmamaları için öğretmenler, okul yöneticileri ve diğer personelin farkındalığının artırılması amacıyla hizmet içi eğitim verilmesi, fiziki imkanları yeterli geçici eğitim merkezlerinde yeni ilkokullar açılması, yeterli olmayan geçici eğitim merkezlerinde ise en yakın ilkokul ile ilişkilendirilmiş sınıflar oluşturulması, ana sınıfları ve ilkokul birinci sınıflarda MEB müfredatına geçilmesidir. Okullarda öğrenimlerine devam eden Suriyeli mülteci öğrencilerin isteğe bağlı olarak kendi dillerini ve kültürlerini yaşatmaları amacıyla ders saatleri dışında kendi dillerinde eğitim programları uygulanabilecek olması gibi politikalar toplumda endişe yaratmıştır. Toplumu endişeye düşüren hususların başında farklı kültürü temsil eden Suriyeli mülteci çocukların mevcut eğitim sistemine nasıl dahil edileceğine ilişkin bakış açısı gelmektedir. Bu araştırma kapsamında daha önce yapılan çalışmalar derlenmiş ve
657
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Türkiye’nin okul çağındaki Suriyeli mülteci çocuklara sunmuş olduğu eğitim hizmetleri, uyguladığı politikalar, Suriyeli mülteci çocukların eğitime erişim durumu ve Suriyeli mülteci çocukların eğitiminde gerek çocukların gerekse öğretmenlerin yaşamış oldukları zorlukları ele alınmıştır. Anahtar kelimeler: Göç, Mülteci, Çocuk, Eğitim.
658
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Education Barriers Of Refugee Children Özge Ruken ERGÜN¹* , H. Eylem KAYA² ¹Süleyman Demirel Universty Department of Sociology Graduate Student, Isparta, Turkey ²Süleyman Demirel Universty Department of Sociology Lecturer, Isparta, Turkey *Responsible author e-mail:
[email protected]
Abstract Migration movements that have taken place in the historical process have always been a decisive factor in the present demographic, socio-economic and cultural development of the world. However, the phenomenon of immigration has increased its speed at an extraordinary rate and has become more massive than in the past. In terms of migration movements in the international arena, Turkey has become an increasingly important country. Since the ancient times, the geography of Turkey, which is considered as a source of resources in international migration movements, has become an important bridge for both transit migrations and actively started to migrate. The events that started in Syria in 2011 have gradually turned into an atmosphere of war and violence and close to 5 million people have had to take refuge in neighboring countries for their life safety. Thanks to Turkey's "open door" policy, more than 3 million Syrians have taken refuge in Turkey. It is foreseen that the Syrian citizens who took refuge in Turkey will not stay in their countries for a long time because the war in Syria is still continuing and the living spaces in the country are disappearing. It is known that more than half of the Syrian refugees are in the age of education. For this reason, in addition to primary needs such as life safety, shelter, food, dressing, education needs and problems also come to light. As of 2011, the educational systems designed for refugee camps for Syrian refugee children have begun to diverge into an off-campus education system by 2013. This betting application has brought many problems with it. At the beginning of these problems comes the fact that the public is not as enlightened. In the extraordinary terms, more comprehensive work on the registration of state-appointed Syrian students for the education of Syrian refugee children to official and private schools affiliated to the Ministry, the establishment of a new president under the head of the Department of Emigration and Emergency Education ", the registration of Syrian children to schools In-service training to increase awareness of teachers, school administrators and other personnel to ensure that they are not exposed to accusations, exclusion and separation in the provision of adaptation to the educational environment and the provision of adaptation to the educational environment; the opening of new primary schools in adequate temporary training centers; Classes will be passed to the curriculum of the Ministry of National Education (MoNE) in the first year of primary classes and elementary schools. Politics has created concern in the community, for instance, that Syrian students who want to have their own language and culture at their disposal may have training programs in their own language outside of class hours. One of the most worrisome aspects of society is the view of how Syrian children, who represent different cultures, are included in the
659
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
current education system. The previous studies have been compiled and discussed the educational services that Turkey offers to the Syrian refugee children in the school age, the policies they apply, the educational accessibility of the Syrian refugee children, and the difficulties that both children and teachers have experienced in the education of the Syrian refugee children. Key words: Migration, Refugee, Child, Education
660
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürdürülebilirlik Açısından Keçi Lifleri ve Geleceği Üzerine Bazı Değerlendirmeler Özgün CAN1,*, Duygu KAŞIKÇI2 1,2
Süleyman Demirel Üniversitesi, Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected]
Özet Sürdürülebilirlik, doğal kaynakları tüketmeden ve çevreye zarar vermeden endüstriyel gelişmenin sağlanması ve gelecek nesillere yaşanabilir bir dünya bırakacak stratejileri içermektedir. Sürdürülebilirliğin ekonomik, çevresel ve sosyal olmak üzere üç boyutu bulunmaktadır ve bu üç boyutun doğru bir şekilde değerlendirilmesi gerekmektedir. Sürekli artan dünya nüfusuyla birlikte tekstil sektörünün tüketiminde de önemli bir artış olmuştur. Bu tüketimin bir sonucu olarak tekstil atıklarının geri dönüşümü, hem doğal kaynakların tükenmeye başlaması hem de atıkların imha maliyetlerinin yükselmesi nedeniyle dünyada önemli bir sorun haline gelmiştir. Bu bakımdan tekstil sektöründe sürdürülebilirlik kavramı ve tekstil ürünlerinin yaşam döngülerinin değerlendirilmesi önemli bir durum arz etmektedir. Dünyayı en çok kirleten sektörlerin başında yer alan tekstil sektöründe sürdürülebilir hammaddelerin ve üretim yöntemlerinin kullanılması atık sorununa bir çözüm olarak sunulabilir. Ayrıca doğal hammaddelerin kullanılması, üretilen ürünlerin kullanım ömürlerinin daha da uzatıp geri dönüşümlerinin sağlanması da tekstilde sürdürülebilirliğin sağlanması açısından önemlidir. Bu çalışmada tekstil sektöründe önemli bir yeri olan keçi liflerinin tekstilde sürdürülebilirliğe olan katkıları değerlendirilmektedir. Anahtar kelimeler: Sürdürülebilirlik, Geri Dönüşüm, Keçi Lifleri, Sürdürülebilir Tekstil, Doğal lif
661
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Some Considerations on Goat Fibers and Their’s Future in Terms of Sustainability Özgün CAN1,*, Duygu KAŞIKÇI2 Süleyman Demirel Üniversitesi, Isparta, Türkiye *Responsible author e-mail:
[email protected] 1,2
Abstract Sustainability includes the provision of industrial development without consuming natural resources and harming the environment, and strategies that will leave a livable world for future generations. There are three dimensions of sustainability economic, environmental and social - and these three dimensions need to be properly assessed. Along with the ever-increasing world population, there has also been a significant increase in the consumption of the textile sector. As a consequence of this consumption, the recycling of textile waste has become a major problem in the world because of both the depletion of natural resources and the increase in the costs of waste disposal. In this respect, the concept of sustainability and evaluation of the life cycle of textile products in the textile sector is an important situation. The use of sustainable raw materials and production methods in the textile sector, one of the most polluting industries in the world, can be presented as a solution to the waste problem. In addition, the use of natural raw materials, the prolongation of the useful life of the manufactured products, and the recycling of the products are also important to ensure sustainability in textiles. In this study, the contributions of goat fibers, which have an important place in the textile sector, to textile sustainability are evaluated. Key words: Sustainability, Recycling, Goat Fibres, Sustainable Textile, Nature fibre
662
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Büyümenin Sınırları: Yeşil Alternatif Eylül Ece DEMİR1, Özlem BULUT2,* Mersin Üniversitesi, Mersin, Türkiye Toros Üniversitesi, Mersin, Türkiye * Sorumlu yazar e-posta:
[email protected] 1
2
Özet Günümüzde her bireyin ortalama bir Avrupalı gibi yaşayabilmesi ve tüketebilmesi için, dünyamızın şimdiki büyüklüğünün üç katı; Amerikan yaşam standartlarına göre ise beş katı olması gerektiği belirtiliyor. Özellikle ikinci dünya savaşından sonra gerçekleşen hızlı büyüme oranları bir yandan ülkelerin GSYH rakamlarını büyütürken diğer yandan iktisat tanımında yer alan ama öngörülemeyecek kadar uzak olduğu varsayılan “kaynakların sınırlılığı” gerçeğinin “büyümenin sınırları”nı belirleyecek noktaya geldiğinin fark edilmesi ile endişelerin artmasına yol açmıştır. Sonrasında ekonomik büyüme hızlarının yavaşlaması, özellikle ekonomik krizlerin yanı sıra yaşanan gıda, enerji krizleri uygulanan büyüme politikalarının ve mevcut kalkınma modelinin sürdürülebilirliğinin sorgulanmasına neden olmuştur. Bu endişeler çerçevesinde, sürdürülebilir büyüme ve kalkınma, ekolojik sürdürülebilirlik gibi kavramlar daha sık kullanılır hale gelmiştir. Bu çalışmada kabul edilen yaklaşım, bu kavramlar ile asıl vurgulanmak istenenin, sistemin devamlılığı bağlamında sermaye birikim sürecinin sürdürülebilirliğidir. Çünkü Kapitalist üretim sürecinde, üretim sürecinin ve dolayısıyla karlılığın sürekliliği hayati önem taşır. Dolayısıyla yakın zamana kadar hakim anlayış tarafından ihmal edilen, kaynakların kıtlığı (ekolojik kısıt) sorunu, ekonomik büyümeyi tehdit ettiği ölçüde ciddi bir şekilde gündeme gelmeye başlamıştır. Birleşmiş Milletler Çevre Programı (UNEP) tarafından yeşil ekonomi, krize çözüm anlamında büyümenin yeni motoru olarak değerlendirilmektedir. Bu çalışmada da yeşil ekonomi, Kapitalist sistemin içine girdiği tıkanıklığı aşması bağlamında “yeşil alternatif” olarak ele alınmaktadır. Çalışmada mevcut sistemin girdiği her krizden yeni çözümler yaratarak çıktığı; 1970’lerin başından itibaren de “büyümenin sınırları krizi”nin, bir yandan doğanın bizzat kendisinin (su, hava, ormanlar vs.) sermayenin yeni değerlenme alanları olarak kullanılması, diğer yandan “çevreye duyarlı” yeni yatırım alanlarının yaratılmasının krizden çıkış yolu olarak değerlendirilmesi tartışılacaktır. Anahtar kelimeler: Büyüme, yeşil ekonomi, sürdürülebilirlik
663
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Limits of Growth: Green Alternative Eylül Ece DEMİR1, Özlem BULUT2,* 1
Mersin University, Mersin, Turkey Toros University, Mersin, Turkey * Responsible author e-mail:
[email protected] 2
Abstract Today it is said that, for the every individual be able to live and consume like an average European, we need a world which is three times the present size of our world; according to American living standards, it should be five times as present. Especially after the Second World War rapid growth rates led to increase GDP figures. Also it has led to increase in concerns by recognizing that the reality of "limitations of resources", assumed to be far from predictable, which is in the definition of economics, has on the point of determining "the limits of growth". The slowdown in economic growth rates, besides the economic crises, food and energy crises led to questioning of the sustainability of the current development model and of the growth policies implemented. Within these concerns, notions such as sustainable growth and development, ecological sustainability have become more common. The approach of this study is, these notions are actually use to emphasized the sustainability of the capital accumulation process in the context of system continuity. Because, in the process of capitalist production, the continuity of the production process and profitability has a vital significance. So when limitations of resources threatening the economic growth, the issue of the shortage of resources (ecological constraint), which has been neglected by the prevailing understanding until recently, has begun to come to the fore. The United Nations Environment Program (UNEP) recognizes the green economy as a new engine to growth in the sense of a crisis solution. In this study, the green economy is considered as a "green alternative" in the context of over the capitalist system crisis. And it will be argued that the capitalist system is try to over “the limits of growth crisis” which was started from the beginning of 1970s, with the used nature itself (water, air, forests etc.), as a new valuation areas of the capital and with the "environmental sensitive" investments. Key words: Growth, green economy, sustainability
664
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürdürülebilirliğin Geliştirilmesi için Çamur Arıtma ve Uzaklaştırma Stratejileri Özlem DEMİR1,*, Mehmet Emin ÇAKIR2 Harran Üniversitesi, Mühendislik Fakültesi, Çevre Mühendisliği Bölümü, Şanlıurfa, Türkiye Harran Üniversitesi, Fen Bilimleri Enstitüsü, Çevre Mühendisliği Anabilim Dalı, Şanlıurfa, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2
Özet Atıksu arıtma tesislerinde üretilen çamur, su, organik madde (insan atıklarından, gıda atıklarından türetilen), ölü ve canlı mikroorganizmalar (patojenler dahil) ve inorganik ve organik toksik kirleticilerin biyolojik olarak karışımıdır. Arıtım sistemini optimize etmek için arıtma sırasında bir miktar çamur düzenli olarak geri devrettirilir. Bununla birlikte, büyük miktarda çamur, atıksu arıtma tesislerinden uzaklaştırılmalı ve işlenmelidir. Arıtma tesisinden elde edilen ham çamur tipik olarak% 97-98 oranında su içerir. Dolayısıyla faydalı bir biyosolid olarak kullanılmak için düzgün bir şekilde arıtım yapılmalıdır. Arzulanan yeni/güncellenmiş teknolojiler, organik maddelerin tam bir geri dönüşümünü ve kirleticilerin varlığı ile bağlantılı potansiyel riskin azaltılmasını sağlamaktadır. Üstelik, çamur, işlenmiş atıksuyun toplam hacminin bir kısmını temsil etmesine rağmen, çamur arıtımı ile ilgili maliyetler atık su arıtma tesisinde tüm işletme giderlerinin % 50'sini oluşturmaktadır. Yenilenebilir enerji ve organik madde için küresel talep arttıkça, atık su çamuru da dahil olmak üzere organik atıklar bu amaç için mevcut kaynaklardan biri sayılmaktadır. Bu substrat, klasik ve gelişmekte olan teknolojilerle güç ve ısı için bir enerji kaynağı olarak kullanılabilir. Üstelik, çamur için uygulanan teknoloji ile iyi kalitede bir ürün elde ediliyorsa, toprak gübreleme ve iyileştirme için bir substrat olarak düşünülebilir. Bu şekilde tekrar kullanım çamurun, atıkların taşınması ve depolanmasına kıyasla ekonomik açıdan uygulanabilir ve çevre açısından sürdürülebilir bir özellikte olduğunu göstermektedir. Mevcut çözümler, sera gazı emisyonlarının azaltılması, zemin koşullarının iyileştirilmesi ve fosil yakıt kullanımının azaltılması yönünde çevreye yarar sağlamaktadır. Uygun atık işlemesine bağlı olarak kısmen geleneksel yakıtların yerini alabilen biyogaz ve biyoyakıtların kullanımıyla enerji maliyeti sağlayacak ekonomik bir potansiyele de sahiptir. Bu hedefleri elde etmek için, atıksu arıtma prosesleri, arıtma çamurunun sadece arıtma tesisinden çıkarıldıktan sonra değil, aynı zamanda arıtma işlemi sırasında dikkatle yönetilmesini gerektirir. Yeni stratejiler, Avrupa Komisyonunun ana konseptini yerine getirmek için eko-inovasyon eğilimine uyacak ve şu anda en çok tercih edilen atık yönetimi hiyerarşisi olarak kabul edilen strateji "azaltmak, yeniden kullanmak, geri dönüştürmek" olacaktır. Bu çalışmada, çamurunun ekonomik ve sürdürülebilir kullanımı için yönetim stratejilerin özetlenmekte, mevcut çamur yönetim çözümleri çevresel sürdürülebilirlik açısından karşılaştırılmaktır. Anahtar kelimeler: Çamur, atık yönetimi, atıksu artıma tesisleri, sürdürülebilirlik.
665
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sludge Treatment and Disposal Strategies for Sustainable Development Özlem DEMİR1,*, Mehmet Emin ÇAKIR 2 Harran University, Engineering Faculty, Environmental Engineering Department, Şanlıurfa, Turkey 2 Harran University, Graduate School of Natural and Applied Sciences, Şanlıurfa, Turkey *Responsible author e-mail:
[email protected]
1
Abstract Sludge produced in wastewater treatment plants is a biological mixture of water, organic matter (derived from human wastes, food waste), dead and live microorganisms (including pathogens) and inorganic and organic toxic pollutants. To optimize the treatment system, some sludge is recycled regularly during treatment. However, in large quantities the sludge must be removed and processed in wastewater treatment plants. The raw sludge obtained from the treatment plant typically contains 97-98% water. Therefore, it must be properly treated in order to be used as a useful biosolid. Desired new / updated technologies provide a complete recycling of organic materials and reduce the potential risk associated with the presence of pollutants. Moreover, although the sludge represents a fraction of the total volume of treated wastewater, the costs associated with sludge treatment constitute 50% of all operating costs in the wastewater treatment plant. As global demand for renewable energy and organic matter increases, organic wastes, including waste water sludge, are considered to be one of the available sources for this purpose. This substrate can be used as an energy source for power and heat with conventional and emerging technologies. Moreover, if a good quality product is obtained with the technology applied for the sludge, the soil can be considered as a substrate for fertilization and improvement. Such reuse shows that the sludge is economically viable and environmentally sustainable compared to the transport and storage of wastes. Existing solutions benefit the environment by reducing greenhouse gas emissions, improving ground conditions and reducing fossil fuel use. Depending on the appropriate waste treatment, it also has an economic potential to provide energy costs through the use of biogas and biofuels, which can partly replace conventional fuels. In order to achieve these goals, the wastewater treatment processes require careful management of the treatment sludge not only after removal from the treatment plant but also during the treatment process. The new strategies will fit into the eco-innovation trend to fulfill the main concept of the European Commission and the strategy that is currently accepted as the most preferred waste management hierarchy will be "to reduce, reuse, recycle". In this study, management strategies for economic and sustainable use of sludge are summarized and current sludge management solutions are compared in terms of environmental sustainability. Key words: Sludge, waste management, wastewater treatment plants, sustainability.
666
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Ekolojik Evsel Atıksu Yönetimi (ECOSAN) Teknolojileri Özlem DEMİR1,*, Mehmet Emin ÇAKIR2
2
1 Harran Üniversitesi, Mühendislik Fakültesi, Çevre Mühendisliği Bölümü, Şanlıurfa, Türkiye Harran Üniversitesi, Fen Bilimleri Enstitüsü, Çevre Mühendisliği Anabilim Dalı, Şanlıurfa, Türkiye *Sorumlu yazar e-posta:
[email protected]
Özet Gelişmekte olan ülkelerde görülen yüksek hastalık oranına ve ölüme yol açan kirlilik çoğunlukla, tuvalet eksikliği ve yetersiz sağlık hizmetlerinden kaynaklanmaktadır. Su kıtlığı, yetersiz finansal kaynaklar, alan eksikliği, zorlu toprak koşulları ve sınırlı kurumsal kapasiteler gibi birçok faktörün sonucunda kentlerdeki bu durum nüfus arttıkça daha da kötüye gidecek ve güvenli, sürdürülebilir ve uygun maliyetli sanitasyon sistemleri için ihtiyaç daha da önemli hale gelecektir. Çevre kirliliğinin kontrol altına alınması ile birlikte doğal kaynakların kontrollü kullanımı ve geri kazanım/yeniden kullanımı gibi konular sürdürülebilirlik kavramı ile birlikte gündeme gelmektedir. Bu bağlamda, ekolojik evsel atıksu yönetimini hedefleyen ECOSAN (Ecological Sanitation) yaklaşımı kaynakta kontrolü esas aldığı için sürdürülebilirlik açısından önemli bir alternatif sunmaktadır. ECOSAN, çevre kirliliğini önlemek amacıyla güvenli bir şekilde toplanabilen, arıtılan ve yeniden kullanılabilen çeşitli atık türlerini arıtmak için kullanılan bir kavramdır. ECOSAN’a göre, evsel atıksu yeniden kullanılabilir bir kaynak olarak kabul edilmektedir. Evsel atıksuyun, bileşenlerine göre ayrılarak toplanması ve uygun arıtımlardan geçirildikten sonra tekrar kullanılabilmesi bu çerçevede değerlendirilmektedir. Sanitasyon yaklaşımı, insan atıklarını güvenli hale getirmek, kirlettikten sonra onu kontrol etmeye çalışmak yerine kirliliği önlemek ve sanitize edilmiş insan atıklarının güvenli ürünlerini çeşitli amaçlarla kullanmayı ele alarak inceler. Son yirmi yılda, farklı atıkların toplanması ve depolanması, arıtma işlemleri ve su ve besi maddelerinin geri kazanılması ve yeniden kullanılması ile ilgili birçok ECOSAN sistemi geliştirilmiştir. Yapılan literatüre araştırmalarına göre, ECOSAN sistemlerinin değerlendirilmesi üzerine yapılan araştırmalar birçok biçimde sınıflandırılabilir. Atık su kaynakları bakımından bazı çalışmalar, idrar uygulaması, idrarın arıtımı, dışkının kompostlaştırılması ve dışkıların ve mutfak atığının birlikte kompostlaştırılması üzerine odaklanmıştır. Performans açısından, ekonomik fizibilite ve çevresel veya sosyal etkilere odaklanan bazı çalışmalar mevcuttur. Arıtım süreci açısından önceki çalışmalar, çoğunlukla farklı tuvalet stillerini, evsel atıksuyun kaynak ayırma toplama yöntemini, farklı atık suyun (siyah su, sarı su, kahverengi su ve gri su) arıtım teknolojilerini ve toplumun kabul edilebilirliğini üzerine gerçekleştirilmiştir. Buna ek olarak, ECOSAN'ın tüm bileşenlerini sistematik olarak değerlendiren az sayıda çalışma mevcuttur. Bu çalışmada, ECOSAN yaklaşımı tanımlanacak ve bu amaçla kullanılan metot ve teknolojiler irdelenecektir. Anahtar kelimeler: Ekolojik evsel atıksu yönetimi, ECOSAN, Ekolojik sanitasyon, atıksu, sürdürülebilirlik.
667
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Ecological Domestic Wastewater Management (ECOSAN) Technologies Özlem DEMİR1,* Mehmet Emin ÇAKIR 2 Harran University, Engineering Faculty, Environmental Engineering Department, Şanlıurfa, Turkey 2 Harran University, Graduate School of Natural and Applied Sciences, Şanlıurfa, Turkey *Responsible author e-mail:
[email protected]
1
Abstract Pollution leading to high disease rates and deaths in developing countries is often caused by toilet deficiencies and inadequate health services. Many factors, such as water scarcity, inadequate financial resources, lack of space, tough land conditions and limited institutional capacities, will make this situation worse in cities and the need for safe, sustainable and cost effective sanitation systems will become even more important. Controlled use of natural resources as well as recycling / reuse are accompanied by the concept of sustainability along with the control of environmental pollution. In this context, ECOSAN (Ecological Sanitation) approach, which targets ecological domestic wastewater management, is an important alternative in terms of sustainability since it is based on source control. ECOSAN is a concept that is used to treat various waste types that can be safely collected, refined and reused to prevent environmental pollution. According to ECOSAN, domestic wastewater is considered a reusable resource. Domestic wastewater can be separated and collected according to its constituents, and it can be reused after it has been passed through appropriate treatments. The sanitation approach examines the prevention of pollution and the use of sanitized human wastes' safe products for a variety of purposes, rather than trying to secure human waste, control it after it has been contaminated. In the last two decades, many ECOSAN systems have been developed for the collection and storage of different wastes, treatment processes and the reclamation and reuse of water and nutrients. According to literature studies, studies on the evaluation of ECOSAN systems can be classified in many ways. Some studies in terms of wastewater resources have focused on urine application, urine treatment, composting of faeces and composting of faeces and kitchen waste. In terms of performance, there are some studies that focus on economic feasibility and environmental or social impacts. Previous studies in terms of the treatment process have mainly focused on different toilet styles, method of collecting resources for domestic wastewater, treatment technologies for different wastewater (black water, yellow water, brown water and gray water) and community acceptability. In addition, there are few studies that systematically evaluate all components of ECOSAN. In this study, ECOSAN approach will be defined and the methods and technologies used for this purpose will be examined. Key words: Ecological wastewater management, ECOSAN, Ecological Sanitation, wastewater, sustainability.
668
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürdürülebilir Gelişme için Sürdürülebilir Kentsel Teknolojiler Pervin ŞENOL1,*, Sümeyye KAHRAMAN2, Burak KORKMAZYÜREK2 SDÜ Mimarlık Fak. Şehir ve Bölge Planlama Bölümü, Isparta, Türkiye SDÜ Mimarlık Fak. Şehir ve Bölge Planlama Bölümü, Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected]
1
21
Özet Çevre sorunlarındaki artış ve ekolojik dengenin bozulmasına yönelik araştırma ve bulguların ulaştığı sonuçlar, sürdürülebilirlik tartışmalarını, kaynakların etkin kullanımı için yeni yönelim ve arayışlarını gündeme getirmiştir. Ekolojik dengenin bozulmasında temel faktör olarak görülen hızlı ve önü alınamayan kentleşme süreçleri, özellikle yeni arayışların da merkezi alanı olmaktadır. Kentler son yüzyıldır üretim ve tüketim merkezleri olmanın yanı sıra küresel ölçekte sürdürülebilirliğin sağlanmasında yeni arayışların, teknolojik gelişmelerin de nesnesi olmaya başlamışlardır. Kentsel alanlara yönelen sürdürülebilir teknolojik gelişmeler arasında, geri dönüşüm teknolojileri, yeniden kullanım teknolojileri, akıllı kentsel projeler ve teknolojiler olarak bir dizi uygulama yer almaktadır. Bu uygulamalar mevcut kentsel sistemlere – mekanlara- entegre olacak şekilde ya da yeni bir yerleşim – kentsel –alan oluşturulması şeklinde gelişebilmektedir. Eko –kentler (eco-city), sürdürülebilir kentler (sustaineble urban area – sustainable city) gibi dünya örnekleri sürdürülebilirliği sadece kavramsal bir çerçeve içinde almanın ötesinde, uygulamayı belirleyen yeni sürdürülebilir kentsel teknolojiler olarak gelişme göstermeye başlamıştır. Bu bildiri kapsamında; sürdürülebilir kentsel teknolojilerin ve bu teknolojilerin kentsel mekanlarda gerçekleştirilen uygulamalarının gelişim süreci değerlendirmeye alınmaktadır. Bu kapsamda; sürdürülebilirlik tartışmaları, kentsel teknolojiler, kentsel teknolojilerin uygulama örnekleri, sürdürülebilir kentsel teknolojilerin kentsel rekabet ve gelişmeye olan katkıları dünya örnekleri üzerinden tartışmaya açılmaktadır. Kentleşmenin ulaştığı nokta göz önünde bulundurulduğunda, sürdürülebilir kentsel teknolojiler kaynakların doğru kullanımı açısından, ulusal kalkınma stratejilerine olan katkısı açısından, küresel iklim değişikliği ve ekolojik denge açısından önemli bir araç ve uygulamalarının yaygınlaştırılması gereken bir yönelim niteliği taşımaktadır. Bu bildirinin, Türkiye’de de bu teknolojilere yönelimin nasıl gerçekleştirilebileceğine ışık tutması açısından önemli olduğu düşünülmektedir. Anahtar kelimeler: Kentleşme, sürdürülebilir kentsel teknolojiler, sürdürülebilir gelişme, sürdürülebilirlik.
669
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sustainable Urban Technology for Sustainable Development Pervin ŞENOL1,*, Sümeyye KAHRAMAN2, Burak KORKMAZYÜREK2 SDÜ Faculity of Architecture Department of Urban and Regional Planning,Isparta,TÜRKİYE SDÜ Faculity of Architecture Department of Urban and Regional Planning,Isparta,TÜRKİYE *Responsible author e-mail:
[email protected]
1 2
Abstract The debates on sustainability have brought new dimension and remedy for effective use of resources especially fort he last thirty years. Its commonly accepted that the main reason for the degradation of ecological balance is rapid and unpredictable urbanization processes. These processes have brought new remedy and solutions to the agenda. Cities are becoming centers of technological developments as well as production and consumption in achieving sustainability on a global scale. Sustainable technological developments in urban areas include a number of applications, such as recycling technologies, reuse technologies, smart urban projects and technologies etc.. These applications can be integrated into the existing urban systems or can be developed as a new settlement. Different world examples and experiences such as eco-cities, smart cities, sustainable cities etc., have begun to develop as sustainable urban technologies that determine sustainability a new dimension. Widespread urban practices within the city and new settlements in the world have begun to develop new dimension for sustainable concept and new sustainable urban technologies. Within the scope of this presentation; the development process of sustainable urban technologies and their implementations in urban areas will be evaluated. In this context; sustainability debates, world examples of sustainable urban technologies, importance of sustainable urban tehnologies for urban competitiveness and their contribution to development will be discussed in terms of world examples. When sustainable urban technology is regarded as a tool that must be widely disseminated from the perspective of effective use of resources, contribution to national development strategies, global climate change and ecological balance. Because of these perspectives, it is believed that this declaration is important in light of how the orientation to these technologies can be realized in Turkey. Key words: Urbanization, urban sustainable technology, sustainable development, sustainability.
670
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Meslek Yüksekokulu Öğrencilerinin Çevre Etiği Konusundaki Yaklaşımlarının Belirlenmesi Recep KÜLCÜ1,2*, Şahin Filiz3 Süleyman Demirel Üniversitesi Yalvaç TBMYO, Isparta, TÜRKİYE Akdeniz Üniversitesi Sosyal Bilimler Enstitüsü Felsefe ABD, Antalya, TÜRKİYE 3Akdeniz Üniversitesi Edebiyat Fakültesi Felsefe Bölümü Antalya, TÜRKİYE *Sorumlu yazar e-posta:
[email protected] 1
2
Özet İnsan dünya üzerindeki serüvenine çevrenin bir unsuru olarak başlamış ancak zamanla doğaya egemen olmak için uğraşmıştır. Bilimsel ve teknolojik gelişimlerin temelinde; doğayı anlamanın yanında ona egemen olma ve onun kurallarını kendi hedefleri doğrultusunda kullanma amacı da bulunmaktadır. Ancak insanın çevrenin bir parçası olması, toplumları çevre üzerinde yaratılan tahribatın kendisini de etkilediği gerçeğiyle karşı karşıya bırakmıştır. Sanayi devrimiyle başlayan teknolojik gelişmeler ve bunun sonucunda artan küresel çevresel sorunlar insanları çevre problemlerine karşı bütüncül çözümler üretme ve ortak akıl oluşturma yoluna sevk etmiştir. Bu çabalar içerisinde, insan-çevre ilişkilerinin etik yaklaşımlar ile değerlendirilmesi ve bu yaklaşımlardan evrensel ahlaki kuralların üretilmesi, doğanın ve yaşamın sürdürülebilirliği için hayati öneme sahiptir. Bu çalışmada Yalvaç Teknik Bilimler MYO öğrencilerinin insan-çevre ilişkileri ve çevre etiği konusundaki yaklaşımlarının ve farkındalıklarının belirlenmesi hedeflenmiştir. Çalışma kapsamında öğrencilerden veri toplama aracı olarak Google Formları kullanılarak elektronik anket uygulamaları yapılmıştır. Toplam 86 öğrenciyle yapılan anket çalışmalarının sonuçları SPSS istatistik paket programında değerlendirilerek yorumlanmıştır. Anahtar kelimeler: Etik, çevre etiği, çevre sorunları.
671
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Determination of Environmental Ethics Approach of Vocational High School Students Recep KÜLCÜ1,2*, Şahin Filiz3 Süleyman Demirel University Yalvaç Vocational School of Technical Science, Isparta, TURKEY 2 Akdeniz University Institute of Social Sciences Department of Philosophy, Antalya, TURKEY 3Akdeniz University Faculty of Letters Department of Philosophy Antalya, TURKEY *Responsible author e-mail:
[email protected]
1
Abstract Human being is an element of the environment but over time has struggled to dominate nature. At the basis of scientific and technological developments; besides understanding nature, human is in control of his dominion and using his rules in the direction of his own goals. But the fact that human is a part of nature has shown that the destruction created by the environment on the societies will also affect itself. The technological developments that started with the industrial revolution and the resulting global environmental problems have led people to create holistic solutions to environmental problems and to create a common mind. In these efforts, the evaluation of human-environment relations with ethical approaches and the activities of producing universal moral rules from these approaches have an important place. In this study, it was aimed to determine the approaches and awareness of Yalvac Vocational School of Science students about human-environment relations and environmental ethics. Within the scope of the study, electronic questionnaire applications were made using Google Forms as data collection tool. The results of the questionnaire studies with 86 students were evaluated and interpreted in SPSS statistical package program. Key words: Ethics, environmental ethics, environmental problems.
672
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Siyaset Bilimi ve Kamu Yönetimi Öğrencilerinin Çevre Etiği ve Mevzuatları Konusundaki Yaklaşımlarının Değerlendirilmesi Recep KÜLCÜ1,2*, Şahin Filiz3 Süleyman Demirel Üniversitesi Yalvaç TBMYO, Isparta, TÜRKİYE Akdeniz Üniversitesi Sosyal Bilimler Enstitüsü Felsefe ABD, Antalya, TÜRKİYE 3Akdeniz Üniversitesi Edebiyat Fakültesi Felsefe Bölümü Antalya, TÜRKİYE *Sorumlu yazar e-posta:
[email protected] 1
2
Özet Çevre kirliliği ve doğal yaşamın korunmasıyla ilgili çalışmaların başarılı olabilmesi için tüm paydaşların uyum içerisinde faaliyet göstermesi gerekmektedir. İnsan ve çevre ilişkilerini düzenleme ve denetlemede paydaşlar; kamu yöneticileri, sivil toplum kuruluşları ve yargı görevlilerinden oluşmaktadır. Yasal düzenlemeler ne kadar detaylı ve koruyucu özellikte hazırlansa da paydaşların çevre etiği konusundaki yaklaşımlarının farklı olması amaçlanan uyumu bozmaktadır. Bunun sonucunda çevreyi koruma ve sürdürülebilir kalkınma hedeflerine ulaşılamamaktadır. Bu çalışmada SDÜ İktisadi İdari Bilimler Fakültesi Siyaset Bilimi ve Kamu Yönetimi bölümü öğrencilerinin çevre etiği ve ülkemizdeki yasal mevzuatlar hakkındaki görüş ve yaklaşımlarının belirlenmesi hedeflenmiştir. Çalışma kapsamında öğrencilerden veri toplama aracı olarak Google Formları kullanılarak elektronik anket uygulamaları yapılmıştır. Toplam 92 öğrenciyle yapılan anket çalışmalarının sonuçları SPSS istatistik paket programında değerlendirilerek yorumlanmıştır. Anahtar kelimeler: Çevre etiği, kamu yönetimi, çevre sorunları.
673
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Evaluation of the Approaches of the Students of Political Science and Public Administration on Environmental Ethics and Legislation Recep KÜLCÜ1,2*, Şahin Filiz3 Süleyman Demirel University Yalvaç Vocational School of Technical Science, Isparta, TURKEY 2 Akdeniz University Institute of Social Sciences Department of Philosophy, Antalya, TURKEY 3Akdeniz University Faculty of Letters Department of Philosophy Antalya, TURKEY *Responsible author e-mail:
[email protected]
1
Abstract In order to be successful in protecting the environment and natural life, all stakeholders must operate in harmony. Stakeholders in organizing and monitoring human and environmental relations are public administrators, non-governmental organizations and judicial officials. Although legal regulations are detailed and protective, different approaches to environmental ethics disrupt the intended adaptation among stakeholders. As a result, environmental protection and sustainable development goals are not achieved. In this study, it is aimed to determine the opinions and approaches of the students of SDU Faculty of Economics and Administrative Sciences, Political Science and Public Administration department about environmental ethics and legal legislation in our country. Within the scope of the study, electronic questionnaire applications were made using Google Forms as data collection tool. The results of the questionnaire studies with 92 students were evaluated and interpreted in SPSS statistical package program. Key words: Environmental ethics, Public Administration, environmental problems.
674
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Türk Yurdunda Bilim: Kadim Türk Uygarlıklarının Zaman Ölçüm Yöntemlerinin Bilgisayar Destekli Simülasyonla Tespit Edilmesi Recep KÜLCÜ1,2 Süleyman Demirel Üniversitesi Yalvaç TBMYO, Isparta, TÜRKİYE Akdeniz Üniversitesi Sosyal Bilimler Enstitüsü Felsefe ABD, Antalya, TÜRKİYE * Sorumlu yazar e-posta:
[email protected] 1
2
Özet Türklerin ilk uygarlıklarını oluşturdukları tarih tam olarak bilinmemektedir. Ancak yazılı kaynaklar dikkate alındığında MÖ. 2500’lere dayandığı görülmektedir. Fakat Türklerin geliştirmiş olduğu dil içerisinde bulunan akrabalık kelimelerindeki zenginlik ve mecaz kullanım özellikleri bu tarihin daha da eskilere dayandığı konusunda bizlere ipuçları sunmaktadır. Türklerin yaşadıkları coğrafyanın zorlu koşulları, hayvancılık ve göçebe bir yaşam tarzını geliştirmiş olmaları gibi nedenlerde yazılı kaynaklar ve kalıcı abidelerden çok sözlü kültür bıraktıkları bilinmektedir. Bu kapsamda Türk kültüründe birçok efsane, hikâye, masal ve ninniler bulunmaktadır. Ancak eski Türklerin bilimsel keşifleri ve geliştirdikleri teknolojiler konusunda bilgiye ulaşmak oldukça zordur. Eski Türkler göçebe hayatlarını “Yurd” adını verdikleri çadırlarda geçirmekteydiler. Bugün modern Türkçede kullanılan “Yurd” kelimesinin kökeni de bu çadırdır. Yurd eski Türkler için yaşam mekânı olmanın ötesine bir anlam ve değere sahiptir. Yurd yapısal özellikleriyle binlerce yıllık deneyim ve tecrübelerin sonucunda ortaya çıkartılmış bir kültür mirasıdır. Bu çalışmada eski Türklerin yaşamında önemli bir yeri olan Yurd’un, özellikle göç zamanları ve kutsal günlerin belirlenmesinde kullanılmış olup olmayacağı sorusuna, bilgisayar destekli 3D modelleme teknikleriyle cevap aranmıştır. İlkçağ toplumlarında zaman ölçmede yaygın olarak güneş saatleri kullanılmaktaydı. Ancak eski Türklerden günümüze kalmış bir güneş saati kalıntısına henüz rastlanmamıştır. Türklerin göçebe yaşantıları ve 21 Mart gibi kutsal tarihleri belirledikleri göz önünde bulundurulduğunda, güneşi zaman ölçmek için kullanmış oldukları ortaya çıkmaktadır. Çalışma kapsamında yapılan modelleme ve gerçek zamanlı simülasyon çalışmaları Türk Yurd’unun yaşam alanı olmanın yanında zaman ölçümünde de kullanılacak şekilde tasarlanmış olduğunu ortaya koymuştur. Anahtar kelimeler: Zaman, Eski Türkler, Yurd, Güneş saati.
675
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Science in Turkish Yurd (Tent): The Discovery of Time Measuring Methods of Old Turkish Civilizations with Computer Aided Simulation Recep KÜLCÜ1,2 Süleyman Demirel University Yalvaç Vocational School of Technical Science, Isparta, TURKEY 2 Akdeniz University Institute of Social Sciences Department of Philosophy, Antalya, TURKEY * Responsible author e-mail:
[email protected]
1
Abstract The exact date that the Turks built their first civilizations is unknown. According to literatures, they have been established at BC 2500. But the language skills developed by the Turks, such as the richness features of the kinship and metaphors in this language, give us clues that this history older than literature knowledge. Old Turks lived in difficult geographies. It is known that during this period they produced very oral culture from written sources and stone structures. For this reason, there are many myths, stories and lullaby in Turkish culture. But we know very little knowledge about the scientific discoveries of the ancient Turks and the technologies they developed. The ancient Turks spent their nomadic life in the tents they gave the name of Yurd. Today, this tent is the origin of the Yurd term used in modern Turkish language. Yurd has a special meaning and value for the ancient Turks. Yurd is a cultural heritage created by thousands of years of experience with structural features. In this study, Yurd, which has an important place in the life of the ancient Turks, was searched by using computer-aided 3D modeling techniques in order to question whether or not it was celebrated especially in terms of migration times and holy days. In ancient societies, sundials were widely used to measure time. However, the remains of a sundial remained untouched by the ancient Turks have not been found. When the Turks determine nomadic experiences and holy dates such as March 21, it turns out that they used the sun to measure time. In the scope of the study, modeling and real time simulation studies were carried out. As a result, Yurd has been designed as a sundial to measure time. Key words: Time, Old Turkish, Yurd, Sundials.
676
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Borsa İstanbul Aile İşletmeleri Endeksi Performans Analizi Remzi TÜRKMEN1,*, Sinan KIZILTOPRAK2 , Mine Aksoy KAVALCI2 Borsa İstanbul, İstanbul, Türkiye Düzce Üniversitesi, Düzce, Türkiye 2 Yalova Üniversitesi, Yalova, Türkiye * Sorumlu yazar e-posta:
[email protected] 1
2
Özet Günümüzde tüm dünyada aile işletmeleri çoğunlukla bağımsız şirketler olarak yer almaktadır. Ülke ekonomilerine yaptıkları katkılardan dolayı aile işletmeleri farklı alanlarda pek çok araştırmaya konu olmuşlardır. Aile işletmeleri ile ilişkilendirilebilecek maliyetler ve faydalar işletmelerin performanslarını etkileyebilir. Literatürde aile işletmelerinin performansını diğer işletmeler ile karşılaştıran pek çok çalışma mevcuttur. Ancak aile işletmelerinin diğer işletmeler ile karşılaştırıldığında daha iyi performans gösterdiği konusunda fikir birliği yoktur. Farklı ülkelerde ve farklı piyasalarda aile işletmeleri için bu çalışmalar hala yapılmaktadır. Bu çalışmada 2016 yılı dikkate alınarak, BIST100 endeksinde yer alan aile işletmeleri için bir aile işletmeleri endeksi (BISTAILE) hesaplanmış, daha sonra bu endeksin borsa performansı BIST100 endeksi performansı ile karşılaştırılmıştır. BISTAILE endeksi için hesaplanmış olan beta değeri birden küçük ve pozitif bulunmuştur. BISTAILE endeksi BIST100 endeksi ile kıyaslanınca daha kötü performans göstermiştir. Borsa İstanbul pay senedi piyasasında aile işletmeleri endeksi henüz hesaplanmamaktadır. Aile işletmeleri için yaratılacak bir endeksin daha iyi performans göstermesi portföy yöneticileri tarafından bu endeksin izlenmesi ve yatırım stratejileri belirlenirken kullanılması anlamına gelecektir. Anahtar kelimeler: Aile İşletmeleri Endeksi, Borsa İstanbul.
677
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Borsa Istanbul Family Business Index Performance Analysis Remzi TURKMEN1,*, Sinan KIZILTOPRAK2, Mine Aksoy KAVALCI2
1
Borsa Istanbul, Istanbul, Turkey Düzce University, Düzce, Turkey 2 Yalova University, Yalova, Turkey * Responsible author e-mail:
[email protected] 2
Abstract Today, family businesses around the world are mostly independent companies. Due to their contribution to the country's economy, family businesses have been subject to many researches in different fields. The costs and benefits that may be associated with family businesses can affect the performance of businesses. There are many studies in the literature comparing the performance of family businesses with other businesses. However, there is no consensus that family businesses perform better when compared to other businesses. These studies are still being carried out for family businesses in different countries and at different markets. In this study, considering the year 2016, a family business index (BISTAILE) is calculated for the family businesses included in BIST100 index, then the stock market performance of this index is compared with the BIST100 index performance. The calculated beta value for the BISTAILE index is found to be smaller than one and positive. The BISTAILE index perform worse than the BIST100 index. The index of family businesses in Borsa Istanbul Equity Market is not yet calculated. The better performance of an index created for family business will mean that portfolio managers will use this index when monitoring, and investment strategies are being determined. Key words: Family Business Index, Borsa Istanbul.
678
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Kırgızistan’ın Calal Abad Bölgesi Kara-Alma Ceviz Ormanında Seleksiyon Çalışmaları Aidai MURATBEK KYZY1, Sadiye GOZLEKCİ1,* 1
Akdeniz Üniversitesi, Ziraat Fakültesi, Bahçe Bitkileri Bölümü, Antalya, Türkiye* *Sorumlu yazar e-posta:
[email protected]
Özet Bu çalışma 2015 – 2016 yılları arasında Kırgızistan Calal Abad bölgesinde yer alan doğal ceviz ormanlarının Kara–Alma ormanlık alanında gerçekleştirilmiş olup tohumdan yetişen ceviz populasyonu içerisinden, üstün meyve özellikleri gösteren ümitvar tiplerin belirlenmesi amacı ile yürütülmüştür. İlk seleksiyon aşamasında hastalıklardan ari ve normalden daha fazla meyvesi olduğu gözlemlenen 120 adet tipten 2015 yılında meyve örnekleri alınmıştır. 1600-1900 m rakımlar arasında yürütülen seleksiyon çalışmasında tartılı derecelendirme sonucu 70 ve üzeri alan 11 tip ümitvar olarak belirlenmiştir. Belirlenmiş olan tiplerde meyve ağırlıklarının 8.09-11.17 g, iç ağırlıklarının 4.07-5.47 g, iç oranlarının % 41.85-54.98, kabuk kalınlığının 1.25-1.76 mm, yan dallarda meyve tutma oranının % 30-60 olduğu belirlenmiştir. Anahtar kelimeler: Juglans regia, seleksiyon, Kara-Alma ceviz populasyonu, meyve kalitesi.
679
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Selection Studies on Kara-Alma Walnut Forest in Zhalal Abad of Kyrgyzstan Aidai MURATBEK KYZY1, Sadiye GOZLEKCİ1,* 1
Akdeniz University, Faculty of Agriculture, Department of Horticulture, Antalya, Turkey *Responsible author e-mail:
[email protected]
Abstract In present study, walnut types grown from seeds in Kyrgyzstan, Zhalal Abad province, Kara - Alma natural walnut forests were investigated during the years 2015-2016 to select the promising types with regard to superior fruit characteristics. During the selection process, fruit samples of 120 disease-free types with fruit loads more than normal were collected in the years 2015. Considering the selection criteria, 11 of them were selected as promising types. Fruit weights of selected types varied 8.09-11.17 g, endocarp weights varied between 4.07-5.47 g, endocarp ratios between 41.85-54.98%, wall thickness between 1.25-1.76 mm, fruit setting ratio over side-branches between 3060 %. Key words: Juglans regia, selection, Kara-Alma walnut population , fruit quality.
680
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Ekonomik ve Ekolojik Sürdürülebilirlik İçin Önerilen Mali Politikalara Eleştirel Bir Bakış Seda CANPOLAT BICAKCI1,* Ankara Üniversitesi, Siyasal Bilgiler Fakültesi, Maliye Bölümü, Ankara, Türkiye * Sorumlu yazar e-posta:
[email protected]
1
Özet Yazında ve uygulamada genel kabul görmüş ancak mevcut olgusal durumu açıklamakta ve/veya çözmekte yetersiz kalmış kavramların önüne veya sonuna ‘sürdürülebilirlik’ gibi niteleyici sözcükler eklenmesi değişim algısı yaratır. Bu algının olgusal gerçeklik ile ne kadar örtüştüğü ise ancak görünenin ardına bakmakla ortaya çıkabilir. Ekonomik, ekolojik ve sosyal/kültürel sürdürülebilirlik, sürdürülebilir kalkınmanın üç temel boyutu olarak tanımlanır. Ekonomi ve ekoloji arasındaki gerilimler ‘sürdürülebilirlik’ kavramı ile yumuşatılmakta, bu gerilimi aşmak üzere, birçok çözüm yolu geliştirilmektedir. Bu çözüm yollarından mali politika önerileri, görünenin ardına ışık tutabilecek niteliktedir. Çalışmanın amacı, mali politikalar üzerinden ekolojik ve ekonomik sürdürülebilirliğin birlikteliğinin ilkesel ve pratik olarak mümkün olup olmadığını tartışmaktır. Bu kapsamda, ‘ekonomik sürdürülebilirlik’ ve ‘ekolojik sürdürülebilirlik’ kavramları tarihsel gelişimleri ile ele alınarak tanımlanmakta, ekonominin ve ekolojinin ilkelerinin uyumlu birlikteliğine dayanan mali politika önerilerine teorik ve pratik eleştiriler yöneltilmektedir. Eleştiriler teorik açıdan ‘kirletme sertifikaları’ ve ‘kirlilik vergileri’ üzerine, pratik olarak ise çeşitli vergi uygulamaları, mali teşvikler ve çevre koruma harcamaları üzerine yoğunlaşmaktadır. Bu alanlardaki iyi örneklere değinilmekle birlikte, esas olarak, radikal bir çözüm için gerekli olan bütünsel bir yaklaşımın ve gerekli dönüşümü gerçekleştirecek toplumsal ve siyasi iradenin eksikliğine vurgu yapılmaktadır. Sonuç olarak ‘sürdürülebilirlik’ kavramı ile bilinçli bir şekilde yaratılan, ekonomi ve ekolojinin uyumuna dair ‘yanılsama’, mali politikalar üzerinden ortaya konmuş olmaktadır. Anahtar kelimeler: Ekonomik Sürdürülebilirlik, Ekolojik Sürdürülebilirlik, Mali Politikalar.
681
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
A Critical Look at the Fiscal Policies Recommended for Economic and Ecological Sustainability Seda CANPOLAT BICAKCI1,* 1
Ankara University, Faculty of Political Sciences,Department of Public Finance, Ankara, Turkey * Responsible author e-mail:
[email protected]
Abstract Adding a qualitative prefix or a suffix such as “sustainability” to concepts those are generally accepted in literature and practice but insufficient to explain and/or to solve the current factual situation creates a perception of change. How much this perception overlaps with the factual reality can only be revealed by looking behind the visible. Economic, ecological and social/cultural sustainability is defined as the three basic dimensions of sustainable development. The tension between economics and ecology is lowered by the concept of ‘sustainability’ and lots of solutions are developped to overcome this tension. The fiscal policy recommendations, one of these solutions, has the nature to enlighten what is behind the visible. The purpose of this work, is to debate the principal and practical possibility of the unity of ecological and economic sustainability through fiscal policies. In this context, the concepts of “economic sustainability” and “ecological sustainability” are defined by handling their historical developments, theoretical and practical critics are pointed to the fiscal policy recommendations based on the harmonic togetherness of the principles of economics and ecology. The critics are theoretically focused on “pollution certificates” and “pollution taxes”, practically focused on different tax applications, fiscal incentives and environmental protection expenses. Although the good examples in these fields are mentioned, mainly, the lack of a holistic approach necessary for a radical solution and social and political willpower which is going to carry out the necessary transformation is emphasised. As a result, the ‘illusion’ about the harmony of economics and ecology which is created on purpose by the concept of “sustainability” is presented through fiscal policies. Key words: Economic Sustainability, Ecological Sustainability, Fiscal Policies.
682
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Türkiye’de STK’ların Yeşil Politika Önerileri: Yeşil Düşünce Derneği ve TÜSİAD Örnekleri Seda CANPOLAT BICAKCI1,*, Burcu KOZBA2 Ankara Üniversitesi, Siyasal Bilgiler Fakültesi, Maliye Bölümü, Ankara, Türkiye 2 T.C. Sayıştay Başkanlığı, Ankara, Türkiye *Sorumlu yazar e-posta:
[email protected]
1
Özet STK’lar siyasi karar alma süreçlerinin önemli bileşenleridirler. Yeşil siyasette önemli rolü bulunan STK’ların politika önerilerinin hayata geçirilmesi, toplumsal güç ilişkileri tarafından belirlenir. Hangi STK’nın ne tür önerilerinin dikkate alınacağı devlet-toplum ilişkisinde gücü elinde bulunduran toplumsal gruba ve bu grubun örgütlenebilmesine bağlıdır. Yeşil politikalar açısından temel tartışma sürdürülebilir kalkınma çerçevesinde ekonomik ve ekolojik önceliklerin uyumu ve çatışması üzerinden yürütülmektedir. Bu temel tartışma, STK’ların yeşil politika önerilerinde somutlanabilmektedir. Çalışmanın amacı, STK’ların iklim politikalarının belirlenmesindeki rolünü ve devlet-toplum ilişkisindeki çelişkilerin siyasi karar alma süreçlerini nasıl ve ne ölçüde etkilediğini ele almaktır. Bu kapsamda, bilinçli bir tercihle belirlenmiş iki STK örneği karşılaştırılmakta, bu STK’ların politika önerilerindeki farklılıkların nedenleri tartışılmaktadır. TÜSİAD, Aralık 2016 tarihli “Ekonomi Politikaları Perspektifinden İklim Değişikliği ile Mücadele” raporunda iklim değişikliği ile mücadele için karbon ticareti ve karbon vergisinin birlikte uygulanmasını ve süreç boyunca ilgili sektörlerin taleplerinin dikkate alınmasını önermektedir. Yeşil Düşünce Derneği ise Sabancı Üniversitesi İstanbul Politikalar Merkezi (İPM) ve Yeşil Avrupa Vakfı ile yürüttükleri “Yeşil İklim, Yeşil Ekonomi” projesi kapsamında Mayıs 2017’de “İklim İçin Yeşil Ekonomi Politikaları” başlıklı raporda iyi uygulama örnekleri üzerinden küçük ölçekli çözümlere dayanan politika önerilerini ortaya koydu. Söz konusu raporlar, hazırlayan STK’nın kuruluş amaçları ve temsil ettiği kesimler düşünüldüğünde bir ölçüde farklılaşmaktadır. Bu farklılaşmanın nedenleri ise söz konusu STK’ların dâhil oldukları düşünce akımlarında ve devlet ile ilişkilerinde aranmalıdır. Anahtar kelimeler: Yeşil Ekonomi, Yeşil Politika, STK’lar, Türkiye.
683
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Green Policy Recommendations of NGO’s in Turkey: Green Thought Association and TÜSİAD Examples Seda CANPOLAT BICAKCI1,*, Burcu KOZBA2 1
Ankara University, Faculty of Political Sciences, Department of Public Finance, Ankara, Turkey 2 Turkish Court of Accounts, Ankara, Turkey *Responsible author e-mail:
[email protected]
Abstract NGO’s are important components of political decision processes. The execution of political recommendations of NGO’s that have an important role in determining green politics are designated by social power relations. What kind of recommendations of which NGO to be taken into consideration is up to the social group that has the power in state-society relation and its ability to become organized. The basic debate from the point of green policies is carried out as a part of sustainable development through the harmony and confliction of economic and ecological priorities. This basic debate can be concretized in the green policy recommendations of the NGO’s, so that ‘harmony’ and ‘confliction’ can be clearly presented. The purpose of the work is to discuss the role of the NGO’s in determining the climate policies and how and how much the contradictions in the state-society relations affect the decision processes. In this context, two NGO examples which are stated with a deliberative choice are being compared, the reasons of the differences in the policy recommendations of these two NGO’s are being discussed. TUSİAD, in December 2016 dated report of “Addressing Climate Change from an Economic Policy Perspective” recommended that carbon trade and carbon tax should be applied together to struggle with the climate change and in this process the demands of the relevant sectors should be taken into consideration. The Green Thought Association exhibited a report dated May 2017, called “Green Economy Policies for Climate” within the “Green Climate, Green Economy” project executed in accordance with Sabancı University Istanbul Policy Center (IPC) and Green European Foundation, recommendations of policies based on small scale solutions through the fair execution examples. The mentioned reports are differentiated in some way when the NGO’s foundational purposes and the groups represented by the NGO’s are considered. The reasons of this differentiation should be searched in the movements of thought that NGO’s are belong to and their relations with the state. Key words: Green Economy, Green Politics, NGOs, Turkey.
684
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Kırsal Yerleşim Bölgelerinde Sürdürülebilirlik: Çünür Yerleşimi/Isparta Seda ŞİMŞEK TOLACI1,*, Mehmet Ali KARAGÖZ 2, Esra BÜYÜKEMİR3 Süleyman Demirel Üniversitesi, Isparta, Türkiye Süleyman Demirel Üniversitesi, Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected]
1 2
Özet İnsan eliyle oluşturulmuş yapılı çevre ve doğal çevrenin sosyo-kültürel ve ekonomik anlamda etkileşimi ile biçimlenen, mekânsal ve işlevsel anlamda yerel özellikler taşıyan yerleşim alanları “kırsal miras” olarak tanımlanabilir. Yerleşimde bulunan yapıların konumları, yöreye has farklı ölçeklerdeki tüm mimari karakteristikleri, sosyo-kültürel yapı çerçevesinde oluşan ve alanın kimliğini oluşturan tüm değerler bu kavram özelinde önem taşımaktadır. Isparta İli Çünür Yerleşimi kırsal miras kavramı, kentsel alanlar ve çevresel etmenler kapsamında değerlendirildiğinde; kentsel sit alanından uzak ancak kentin yeni gelişim akslarına yakın konumda, Süleyman Demirel Üniversitesi yerleşkesi, Çünür tepesi ve yeni gelişen çok katlı konut yapıların bulunduğu yerleşim alanı arasına sıkışmış bir doku olarak görülür. Sahip olduğu yerel karakteristik özellikleri, kentsel alan içerisinde kalmasına rağmen halen kırsal özellikler taşıması ve özel bir konut dokusuna sahip olması dolayısı ile kırsal miras kavramı çerçevesinde değerlendirilmesi gereken bir yerleşim alanıdır. Kerpiç malzeme kullanılarak inşa edilen konut yapılardan oluşan bu doku, günümüzde farklı hedefler doğrultusunda dönüşüm sürecine girmiş ve az sayıda konut barındırır hale gelmiştir. Bu kapsamda zaman kaybedilmeden gerçekleştirilmesi gereken alan taraması ve tespitler yapılmıştır. Yerleşimde yapılaşma yoğunluğunu oluşturan konutların konumları, plan tipleri, cephe karakterleri, yapı elemanları ve malzemeleri; görsel analiz, krokilendirme ve fotoğraf çekimi yapılarak belgelendirilmiş, tescil önerileri sunulmuştur. Çalışma kapsamında alanın sürdürülebilirliğinin sağlanabilmesi için yerleşime özgü konut tipolojilerinden oluşan somut kültürel miras değerlerinin dışında, geleneksel yaşam pratiklerini yansıtan somut olmayan kültürel miras değerlerinin de tespitine çalışılmış, çok yönlü ve bütünleşik bir koruma yaklaşımı uygulaması için adım atılmıştır. Anahtar kelimeler: Sürdürülebilirlik, Çünür/Isparta , kırsal miras, konut, kerpiç malzeme
685
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sustainability in Rural Settlement Regions: Çünür / Isparta Seda ŞİMŞEK TOLACI1,*, Mehmet Ali KARAGÖZ 2, Esra BÜYÜKEMİR3 Süleyman Demirel University, Isparta, Türkiye Süleyman Demirel University, Isparta, Türkiye *Responsible author e-mail:
[email protected] 1 2
Abstract The residential areas, which are formed by the interaction of socio-cultural and economical meaning of the built environment and natural environment, are characterized by spatial and functional local characteristics and can be defined as "rural heritage". The locations of the dwellings in the settlement, all the architectural characteristics of them in different scales, the socio-cultural structure and all the values forming the identity of the area are important in this concept. When this concept is evaluated within the scope of urban areas and environmental factors, Isparta İli Çünür Settlement, It is seen as a texture which is distant from the urban site but close to the new development axes of the city and is stuck between campus of the Süleyman Demirel University, Çünür Hill and the residential area where the newly developed multi-storey residential structures are located. It is a settlement area that should be evaluated within the framework of the rural heritage concept. The reasons of this are; having local characteristic features, altough being located in urban area, still has rural features and having a special dwelling texture. This texture, which is made up of dwelling structures built using adobe material, is now in the process of transformation in the direction of different goals and it has become having few houses. In this context, field survey and determinations are done which needs to be realized without loss of time. In the settlement, locations of dwellings that make up the density, plan types, facade characters, building elements and materials; documented by visual analysis, croaking and photographing were presented and registration proposal was presented. In order to ensure the sustainability of the site, steps have been taken to implement a multi-directional and integrated conservation approach, in addition to the concrete cultural heritage values of settlement-specific dwelling typologies, in which the values of intangible cultural heritage reflecting traditional life practices are identified, a step has been taken to implement a versatile and integrated protection approach. Key words: Sustanibility, Çünür/Isparta , rural heritage, dwelling, adobe material.
686
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürdürülebilir Kentsel Gelişmede Bütünleşik Ulaşım Planlamasının Önemi-Konya Raylı Sistem Örneği Sedef ERYİĞİT1,*, Ümmügülsüm TER2 Necmettin Erbakan Üniversitesi, Mühendislik ve Mimarlık Fakültesi, Şehir ve Bölge Planlama Bölümü, Konya/TÜRKİYE 2 Necmettin Erbakan Üniversitesi, Mühendislik ve Mimarlık Fakültesi, Şehir ve Bölge Planlama Bölümü, Konya/TÜRKİYE *Sorumlu yazar e-posta:
[email protected] 1
Özet Günümüzde artan bireysel motorlu ulaşımın doğal ve yapılaşmış çevre üzerindeki olumsuz etkilerinin kent ve kentlinin gündeminde oldukça yoğun bir şekilde yer alması, sürdürülebilir kentsel gelişme ve ulaşım planlamasının birlikte irdelenmesi gerekliliğini ortaya koymuştur. Bu kapsamda; kentsel gelişmede gelecek kuşakları da gözeterek kalıcı çözüm sağlamayı amaçlayan sürdürülebilir ulaşımın temel stratejilerinden birisi toplu taşım türlerinin geliştirilerek bireysel araçlara olan bağımlılığın azaltılmasıdır. Ancak, günümüzde sürdürülebilir ulaşıma yönelik yapılan çalışmalarda kullanıcıların ve bütünleşik ulaşım planlamasında yayanın göz ardı edilmesi ulaşımın sürdürülebilirlik ilkelerinden uzak bir sistem sunmasına sebep olmaktadır. Toplu taşım türleri içerisinde raylı sistemler, hava kirliliğine sebep olmaması ve kentsel alanları verimli kullanması bakımından sürdürülebilir ulaşım türleri olarak kabul edilmektedir. Raylı sistem istasyonlarında yayalara yönelik rahat ve güvenli erişimi sağlayacak koridorların hazırlanması, güvenliğini sağlayacak fiziksel düzenlemelerin yapılması, ulaşımda toplu taşımı cazip hale getirerek otomobil kullanımını azaltılması, sürdürülebilir kentsel gelişme üzerinde olumlu katkı sağlamaktadır. Bu çalışmada amaç, yaya ve raylı sistemlerin bütünleşik planlama yaklaşımıyla irdelenmesi ve sürdürülebilir kentsel gelişmenin sağlanmasındaki etkinliğinin ortaya konmasıdır. Bu kapsamda çalışmada; Konya kenti tramvay güzergahı (Alaaddin-S.Ü Kampüs Hattı) örneklem alan olarak seçilmiştir. Çalışma, araştırmacıların gözlemlerine, kurum görüşmelerine ve literatür araştırmalarına dayandırılmıştır. Araştırma bulgularının değerlendirilmesi ve yazında yer alan kavramlar ile ilişkilendirilmesi sonucunda edinilen çıktılar yorumlanarak, öneriler geliştirilmiştir. Anahtar kelimeler: Sürdürülebilir kentsel gelişme, sürdürülebilir ulaşım planlaması, bütünleşik ulaşım planlaması, yaya ulaşımı, raylı sistemler.
687
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Significance Of Integrated Transportation Planning For Sustainable Urban Development-The Konya Rail System Sample Sedef ERYİĞİT1,*, Ümmügülsüm TER2 1
Necmettin Erbakan University, Faculty of Engineering and Architecture, Department of City and Regional Planning, Konya/TURKEY 2 Necmettin Erbakan University, Faculty of Engineering and Architecture, Department of City and Regional Planning, Konya/TURKEY
*Responsible author e-mail:
[email protected]
Abstract The fact that the negative effects of increasing individual motorized transportation on the natural and built-up area are intensely taking place on agenda of the cities requires to examine both sustainable urban development and transportation planning together. In this context; one of the basic strategies of sustainable transportation aiming at providing a durable solution by considering the future generations is to reduce the dependency of individual vehicles by developing the mass transportation. However, the ignorance of the pedestrians as well as beneficiaries in the integrated transportation planning in the recent operations and works regarding sustainable transportation leads to a system that is far from the principles of sustainability of transportation. Railway systems in public transportation are considered as sustainable types of transportation in terms of not causing air pollution and efficient use of urban areas. The construction of zones providing comfortable and safe access to pedestrians at railway stations and the provision of physical arrangements ensuring safety of pedestrians and beneficieries, make positive contribution to sustainable urban development and the reduction of car usage by making public transport attractive. The aim of this study is to investigate pedestrian and rail systems by an integrated planning approach and to demonstrate their effectiveness in sustainable urban development. In this context, Konya city tram route (Alaaddin-S.Ü Campus Line) was selected as the sample area. The study was based on researchers' observations, institutional interviews and literature. As a result of evaluating the research findings and associating them with the concepts in the literatüre, the results will be interpreted and suggestions will be made in this regard. Key words: Sustainable urban development, sustainable transportation planning, integrated transportation planning, pedestrian access, rail systems.
688
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürdürülebilir Ulaşımın Sosyal Boyutunda Eşitliğin ÖnemiKonya Örneği Sedef ERYİĞİT1,* 1
Necmettin Erbakan Üniversitesi, Mühendislik ve Mimarlık Fakültesi, Şehir ve Bölge Planlama Bölümü, Konya/TÜRKİYE *Sorumlu yazar e-posta:
[email protected]
Özet Günümüzde artan kentsel ulaşım sorunlarına gelecek kuşakları da gözeterek kalıcı çözüm sağlamayı amaçlayan sürdürülebilir ulaşımın önemli çalışma alanlarının birini ulaşım hizmetlerinin toplumda yaşayan herkese eşit hakların verilmesi oluşturmaktadır. Ancak, günümüze değin sürdürülebilir ulaşıma yönelik yapılan çalışmalarda sosyal boyutun göz ardı edilmesi ve ulaşım imkanlarından özellikle engelli ve yaşlı bireylerin dışlanması ulaşımın dengeli bir sistem sunmasına engel oluşturmaktadır. Sürdürülebilir gelişmenin sosyal boyutunu yansıtan hedeflerin başında; insanlar arasında ayırımcılık ve dışlayıcı politika ve uygulamalarla mücadele edilmesi, toplumun kadınlar, çocuklar, yaslılar, engelliler, yoksullar gibi hassas gruplar basta olmak üzere tüm insanlara eşit haklarının tanıması ve bu haklara saygı gösterilmesi gelmektedir. Bu nedenle, yapılan planlama çalışmalarında sürdürülebilir ulaşımın sosyal boyutunda eşitliğin öncelikle ele alınarak, ulaşım ve dolaşıma dair olanakların hiçbir ayrım yapılmadan tüm bireylere eşit olarak sunulabilmesi gerekmektedir. Bu çalışmada amaç, özellikle fiziksel ve duyusal engellilerin toplutaşım kullanımının irdelenerek, sosyal sürdürülebilirlik ilkelerinden olan eşitliğin toplutaşım ulaşımı üzerindeki etkilerini ortaya koymaktır. Bu kapsamda çalışmada, Konya kenti toplutaşım sistemleri örneklem alan olarak seçilmiştir. Çalışma; araştırmacının gözlemlerine ve literatür araştırmalarına dayandırılmıştır. Yapılan gözlemlerin ve yazında yer alan kavramların ilişkilendirilmesi sonucunda; fiziksel ve duyusal engellilerin toplutaşım kullanımındaki sorunlar ortaya konarak; engellilerin toplutaşım ulaşımında karşılaştıkları sorunların azaltılmasına ve sürdürülebilir ulaşımda eşitliğin sağlanmasına yönelik öneriler geliştirilmiştir. Anahtar kelimeler: Sürdürülebilir ulaşım planlaması, sosyal sürdürülebilirlik, eşitlik, engelliler, toplutaşım.
689
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Significance Of Equality In The Social Dimension Of Sustainable Transportation-Konya Sample Sedef ERYİĞİT1,* 1
Necmettin Erbakan University, Faculty of Engineering and Architecture, Department of City and Regional Planning, Konya/TURKEY
*Responsible author e-mail:
[email protected]
Abstract Today, one of the important areas of sustainable transportation that aims to provide a permanent solution to the increasing urban transportation problems by considering future generations is to provide equal rights for everyone provided with public transportation services in the society. However, the factors such that the social dimension is ignored in studies regarding sustainable transportation services, especially the exclusion of disabled and elderly people, is a barrier to provide a balanced system of transportation. The first goal reflecting the social dimension of sustainable development is to fight against discrimination and discriminatory policies and practices among the people and to provide equal rights all people especially including vulnerable groups such as the women, the children, the elders, the disabled and the poor. For this reason, the priority should be given to the concept of equality by providing transportation equally without any discrimination in the opportutinities for transportation and circulation in the planning stages of the social dimension of a sustainable transportation. The purpose of this study is to investigate collective usage of the transportation of physically-sensory challenged individuals in order to demonstrate the effects of the concept equality which is one of the social sustainability principles over collective transport. In this context, the Konya city transit system were selected as the sampling area. Data was collected by the observations of the researcher and the literature search. As a result of associating the observations with the concepts in the literature; the problems of collective use of physical and sensory challenged individuals were aimed to be revealed. Therefore recommandations would be made to reduce the problems faced by people with disabilities in transit systems in order to ensure the equality in sustainable transport. Key words: Sustainable transportation planning, social sustainability, equality, disabled people, public transportation.
690
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Daha Temiz Deri Üretimi; Kireç Ve Sülfür İçermeyen Kıl Giderme Ve Kireçlik İşlemi Selime MENTEŞ ÇOLAK1 Ege Üniversitesi Mühendislik Fakültesi Deri Mühendisliği Bölümü, Bornova, İZMİR/TÜRKİYE * Sorumlu yazar e-posta:
[email protected]
1
Özet Deri üretim işlemleri sırasında oluşan atıklar içinde kıl giderme ve kireçlik işlemi en büyük kirlilik payını oluşturmaktadır. Geleneksel kıl giderme ve kireçlik işlemlerinde yüksek miktarlarda kireç ve sülfür kullanılır. Sülfür çok iyi bir kıl giderici olmasına rağmen toksik bir maddedir. Kireç suda zayıf çözünürlüğe sahiptir. Bu nedenle kireç, atık suda büyük miktarlarda askıda katı madde oluşumuna ve büyük miktarlarda çamura neden olmaktadır. Geleneksel kıl giderme-kireçlik yöntemin en büyük dezavantajı atık suda; askıda katıların, BOİ5 (Biyolojik Oksijen İhtiyacı) ve KOİ (Kimyasal Oksijen İhtiyacı) değerlerinin yüksek olmasıdır. Bu tür atık sulardan sülfürün uzaklaştırılması, zor ve maliyetleri yüksektir. Bu çalışmada, kireçlik işleminden kaynaklanan kirlilik yükünü azaltmak için hidrojen peroksit ve enzim ile kireçlik işlemi yapılmıştır. Farklı kireçlik kimyasalları ile uygulanan kireçlik işlemleri sonucu ortaya çıkan atık sularda; KOİ, BOİ5, toplam azot, sülfür, toplam katı madde, askıda katı madde ve pH testleri yapılarak atıksuların kirlilik yükleri tespit edilmiştir. Deneysel İşlem sonucu ortaya çıkan atıksuların kirlilik yükü geleneksel yöntem atıksuları ile karşılaştırılmıştır. Elde edilen sonuçlara göre enzim ve hidrojenperoksit kullanılarak yapılan işleminin kirlilik yükünün geleneksel ve yöntemlere göre daha düşük olduğu ve çevre açısından daha iyi sonuçlar verdiği tespit edilmiştir. Anahtar kelimeler: Çevre, Deri, Atıksu, Enzim, Kireçlik, Hidrojenperoksit.
691
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Cleaner Leather Production; Lime And Sulfide Free Dehairing And Liming Process Selime MENTEŞ ÇOLAK1,* Ege Üniversitesi Mühendislik Fakültesi Deri Mühendisliği Bölümü, Bornova, İZMİR/TÜRKİYE * Responsible author e-mail:
[email protected]
1
Abstract Among the wastes formed during leather production processes, the biggest pollution share constitutes unhairing and liming process. In the traditional unhairing and liming process high amounts of lime and sulfur are used. Although sulfur is a very good hair removal agent, it is a toxic substance. The lime has poor solubility in water. For this reason, lime causes a large amount of suspended solids in the waste water and large amounts of sludge. The main disadvantage of the traditional liming method has high suspended solids, BOD5 (Biological Oxygen Demand) and COD (Chemical Oxygen Demand) values. Removing of sulphide from such waste water is difficult and costly. In this study, to reduce the pollution load caused by liming process , liming has been done with hydrogen peroxide and enzymeThe liming processes applied with different liming chemicals are the result of waste water; COD, BOD5, total nitrogen, sulfur, total solids, suspended solids and pH were tested to determine pollution loads of wastewater.. The pollution load of the wastewater obtained from the experimental process have been compared with the conventional prosess wastewater. According to the obtained results, it has been founded that the process of using the enzyme and hydrogen peroxide has lower pollution load than conventional and methods and gives better results in terms of environment. Key words: Environment, leather, wastewater, enzyme, liming, hyrogenperoxide.
692
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Çevre Dostu Krom Tabaklama; Transglutaminaz Enzimi İle Atık Krom Minimizasyonu Selime MENTEŞ ÇOLAK1, Mert GÖK1 Ege Üniversitesi Mühendislik Fakültesi Deri Mühendisliği Bölümü, Bornova, İZMİR/TÜRKİYE * Sorumlu yazar e-posta:
[email protected]
1
Özet Tabaklama, deri matriksinin mikrobiyal bozulmaya, ısıya ve tere karşı dayanıklılığını sağlayan anahtar süreçtir. Krom, deriye kazandırdığı mükemmel özellikleri ve işlem kolaylığı nedeniyle tabaklama işleminde yaygın olarak kullanılmaktadır. Krom, küresel deri üretiminde hayati derecede önemli bir kimyasaldır ve deri üretiminin en az % 80-90'ı krom tuzlarıyla yapılmaktadır. Dünyadaki çevresel yetkililerin baskısı nedeniyle, deri sanayii atıksuyun içindeki üç değerlikli krom kirliliğini en aza indirmek zorundadır. Kromun toksitesi ve zayıf krom tüketimi atık suda kromun azaltılması deri endüstrisi için önemli problemdir. Günümüzde, tabaklama proseslerinin çevresel etkilerinin en aza indirgenmesi birçok araştırmacının hedefidir. Bu araştırmada transglutaminaz enziminin ön tabaklama maddesi olarak kullanımı ve krom tabaklamada kullanılan krom miktarının azaltılması üzerine araştırmalar yapılmıştır. Transglutaminaz enzimi, Protenlerin ε- (γ-glutamil)lisin çapraz bağlarıyla polimerizasyonunu destekleyen ve proteinler arasındaki kovalent çapraz bağların oluşumunu katalizleyen bir enzimdir. Araştırmada kullanılan deriler sırt çizgisinden kesilerek deney ve kontrol grubu olarak ayrılmıştır. Deney grubu deri örneklerine %2 transglutaminaz enzimi ile ön tabaklandıktan sonra % 4 ve % 6 krom tabaklama maddesi ile tabaklama işlemi yapılmıştır. Kontrol grubu örneklerde tabaklamada % 4, % 6 ve % 8 krom tabaklama maddesi kullanılmıştır. Deri örneklerinin çekme mukavemeti ve % uzama testleri TS EN ISO 3376’ya göre, deri içerisindeki krom oksit miktarını TS EN ISO 5398-1’e göre tespit edilmiştir. büzülme sıcaklığı testleri TS EN ISO 2589’a göre yapılmıştır. Atık tabaklama banyosundaki krom oksit miktarı TS EN ISO 5398-1’e göre tayin edilmiştir. Translutaminaz ile ön tabaklaması yapılmış örneklerin ön tabaklama yapılmayan örneklere göre ortalama %20 daha fazla kalınlık artışı olmuştur. Büzülme sıcaklığı testlerinde ise ortalama 5Co artış görülmüştür. Transglutaminaz enzimi ile ön tabaklama yapılmış örneklerin atık banyodaki krom miktarları ortalama %8 daha az çıkmıştır ve ortalama %2,5 deriye bağlanan krom artmıştır. Çekme mukavemeti testlerinde tranglutaminaz ile ön tabaklama yapılan derilerin çekme mukavemetleri ortalama %5 daha fazla çıkmıştır.
693
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Araştırma bulguları; transglutaminaz enzimi kullanımının deri özelliklerini iyileştirdiğini ve atıktaki krom miktarını azalttığını göstermektedir. Ayrıca bu yöntem kontrol grubuna göre deriye dolgunluk ve yumuşaklık kazandırmaktadır. Anahtar kelimeler: Çevre, deri, tabaklama, transglutaminaz enzimi, krom.
694
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Eco-Friendly Chrome Tanning; Waste Chrome Minimization By Transglutaminase Enzyme Selime MENTEŞ ÇOLAK1 Mert GÖK1 Ege Üniversitesi Mühendislik Fakültesi Deri Mühendisliği Bölümü, Bornova, İZMİR/TÜRKİYE * Responsible author e-mail:
[email protected]
1
Abstract Tanning is the key process that renders stability to the skin matrix against microbial degradation, heat, sweat etc. Chromium is used widely in tanning for the excellent properties that it renders to the leather along with simplicity of operation. Chromium remains a vitally important chemical in the global production of leather with at least 80-90 % of global leather production being tanned with safe chromium salts. Due to increasing pressure from the environmental authorities the world over, the leather industry have to minimize pollution trivalent chromium in the wastewater. The toxicity of chromium, poor uptake of chromium and to reduce chromium in waste water is important problem for leather industry. Currently, minimizing the environmental impact of tanning processes is the goal of many researchers. In the present research was carried out on the use of transglutaminase as a pretanning agent and to minimize the amount of chromium used in tanning. Transglutaminaz enzimi, Protenlerin ε- (γ-glutamil)lisin çapraz bağlarıyla polimerizasyonunu destekleyen ve proteinler arasındaki kovalent çapraz bağların oluşumunu katalizleyen bir enzimdir. The skins that used in the research has been cut from the back line and divided by into experiment and control groups. Experiment group skin samples has been pretanned with 2% transglutaminase enzyme and tanned with 4% and 6% chromium tanning agent. In the control group, 4%, 6% and 8% chromium tanning material were used in the samples. The tensile strength and% elongation tests of leather samples are determined according to TS EN ISO 3376, the amount of chromium oxide in leather according to TS EN ISO 5398-1. Shrinkage temperature tests were carried out according to TS EN ISO 2589. The amount of chromium oxide in the waste tanning bath has been determined according to TS EN ISO 5398-1. The samples with pre-tanning with translutaminase had an average increase of 20% more thickness than the samples without pre-tanning. There is an average increase of 5 Co has been observed in the shrinkage temperature tests. The amount of chromium in the waste wood of the samples pre-tanned with the transglutaminase enzyme increased by an average of 8% less and the average chromium increased by 2.5%. In tensile strength tests, tensile strengths of pre-tanned skins with tranglutaminase were increased by 5% on average. The research findings show that use of transglutaminaz enzyme improves skin properties and reduces the amount of chromium in the waste. The amount of chromium 695
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
in the waste was lower in the experiment group. This method also gives fullness and softness to the control group. Key words: Environment, leather, tanning, transglutaminase enzyme, chrome.
696
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Bolu Ekolojisinde Sprey Karanfil Yetiştiriciliğinin Belirlenmesi Selma TUNA KOÇOĞLU1,*, Turan KARADENİZ2, Selma BERK1, Emrah GÜLER2 Abant İzzet Baysal Üniversitesi, Mudurnu Süreyya Astarcı Yüksek Okulu, Bolu/Türkiye Abant İzzet Baysal Üniversitesi, Ziraat ve Doğa Bilimleri Fakültesi, Bahçe Bitkileri Bölümü, Bolu/Türkiye * Sorumlu yazar e-posta:
[email protected] 1
2
Özet Bu çalışmada, Bolu ekolojik koşullarında sprey karanfil çeşidi yetiştiriciliğinin belirlenmesi hedeflenmiştir. Altı farklı renkte sprey karanfillerde; çiçek sap kalınlığı, çiçek sap uzunluğu, çiçek çapı, boğum sayısı, boğum arası uzunluk, dal ağırlığı, çiçek tomurcuk sayısı, taç yaprak sayısı, vazo ömrü özelliklerine bakılmıştır. Çiçek sap uzunluğu 84.25 cm ile kırmızı alacalı çeşidinde, boğum sayısı 10.9, 10.45, 10.45 ortalama ile sırasıyla kırmızı alacalı, turuncu alacalı ve sarı renkli sprey karanfil çeşitlerinde ön plana çıkmaktadır. Kırmızı alacalı çeşidinde 6,15 cm olarak belirlenen çiçek sap kalınlığı, kırmızı çeşitte 5.71 cm olarak belirlenmiştir. Çiçek çapı bakımından 51.94 ve 51.59 cm ile kırmızı alacalı ve beyaz karanfil ön plana çıkmaktadır. Gonca sayısı 3 ile 6.05 adet arasında değişkenlik göstermiştir. En yüksek değere kırmızı alacalı sahipken en düşük değere sarı çeşit sahip olmuştur. Pembe ve beyaz sprey karanfil çeşitlerinde ise sırasıyla 39.5 ve 43 adet taç yaprak sayısı kaydedilmiştir. Sonuç olarak Bolu ekolojisinde örtü altında karanfil bitkisinin yetiştirilebileceği tespit edilmiş ve çeşitler arasında kırmızı alacalı yüksek kalite göstermiştir. Anahtar kelimeler: Sprey karanfil, Bolu, adaptasyon.
697
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Determination of Spray Carnation Growth in Bolu Ecology Selma TUNA KOÇOĞLU1,*, Turan KARADENİZ2, Selma BERK1, Emrah GÜLER2 The University of Abant İzzet Baysal, Mudurnu Süreyya Astarcı Vocational School, Bolu /Turkey The University of Abant İzzet Baysal, Faculty of Agriculture and Nature Science, Department of Horticulturel Science, Bolu /Turkey Responsible author e-mail:
[email protected]
1
2
Abstract In this study, it was aimed to determine spray carnation cultivation in Bolu ecological conditions. Flower stem length and thickness, flower diameter, number of node, internode length, branch weight, number of flower bud, number of petals and vase life were examined in six different spray carnations. Flower stem length was come into prominence in red variegated variety with 84.25 cm. The number of node were recorded as 10.9 in red variegated and as 10.45 in orange variegated and yellow varieties. Flower stem thickness was determined as 6.15 cm in the red variegated variety whereas it was determined as 5.71 cm in the red variegation. Red variegated and white carnations were come into prominence with flower diameters as 51.94 and 51.59 cm respectively. The number of flower bud varied between 3 and 6.05. While red variegated possessed the highest value of it, yellow varieties possessed the lowest. Respectively 39.5 and 43 number of petals was recorded in pink and white spray carnation. As a result, it was determined that carnation plant can be grown in greenhouse in Bolu ecology and red variegation variety showed high quality in among varieties. Key words: Spray carnation, Bolu, adaptation.
698
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
UV-Spektroskopisi İle İkili İlaç Karışımlarının İstatistiksel Analizi Güzide Pekcan ERTOKUŞ1, Okan BAYRAM2, Semih KÖLEMEN3,* 1
Suleyman Demirel University, Isparta, Turkey Suleyman Demirel University, Isparta, Turkey *Sorumlu yazar e-posta:
[email protected] 2,3
Özet Metronidazol ve metaklopramitin ikili karışımlarının ön ayırma olmaksızın ayırımı doğru bir şekilde yapılmıştır. Çok değişkenli kalibrasyon teknikleri, karışımların veri analizlerinde kullanılan kuvvetli analitik metotlardır. Çoğunlukla tercih edilen teknikler, temel bileşen regresyonu (PCR) ve kısmi en küçük kareler regresyonu (PLS), bileşenlerin miktarını tayin eder. Bu çalışmanın amacı, kemometrinin ayrıcalıkları ile daha önceki analitik metotların kıyaslanması ile daha güvenilir ve daha alternatif bir metot geliştirmektir. Bu metotla hatalar azaltılarak, herhangi bir ön ayırma olmaksızın aktif maddelerin analizine olanak sağlanmaktadır. Sonuçlar, doğru ve kesinlik açısından istatistiksel olarak kıyaslanmıştır. Anahtar kelimeler: Metronidazol, Metaklopramit, Kemometrik Metot.
699
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Statistical Analysis Of Drug Combination By UV-Spectroscopy Güzide Pekcan ERTOKUŞ1, Okan BAYRAM2, Semih KÖLEMEN3,* 1
Suleyman Demirel University, Isparta, Turkey Suleyman Demirel University, Isparta, Turkey *Responsible author e-mail:
[email protected] 2,3
Abstract A binary mixture of metronidazole, metoclopramide was determined by two simple and accurate methods, without prior separation. Multivariate calibration techniques were powerful analytical tools to used in data analysis for the mixtures. The most widely used techniques, principal component regression (PCR), partial least square (PLS) were determinated the amount of the compounds. Aim of this study is to improve a more reliable, and more alternative method when compared to former analytic methods with the help of chemometric methods. Due to this method, active ingredients will be analyzed without separation and pre-separation and time and labor loss due to trial and error method will be avoided with a correct modeling. The results obtained were statistically compared with each other showing no significant difference with respect to accuracy and precision. Key words: Metronidazole, Metaclopramide, Chemometric method.
700
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Parasetamol, Asetilsalisilik Asit Ve C Vitamini İlaç Maddelerinin Çoklu Doğrusal Regresyon İle Tayini Semih KÖLEMEN1,*, Güzide Pekcan ERTOKUŞ2 Süleyman Demirel Üniversitesi, Isparta, Türkiye Süleyman Demirel Üniversitesi, Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2
Özet Kronik Baş ağrısı, diş ağrısı, nevralji, siyatik ağrıları gidermek, ateşli hastalıklarda, grip ve soğuk algınlığında ateş düşürmede ve yardımcı olarak da rolü olan parasetamol , asetilsalisilik asit ve C vitamini etken maddelerinin eş zamanlı spektrofotometrik olarak tayini için yeni bir istatistik yöntem olan kemometri kullanılmıştır. Bu yeni istatistik yöntemde veriler çoklu doğrusal regresyonu ile değerlendirilmiştir. Kemometrik tekniklerle, karmaşık sistemlerin bile herhangi bir ön ayırma işlemine tabi tutulmadan, olduğu gibi spektrofotometrik olarak analizine olanak sağlanarak, Parasetamol, Asetilsalisilik asit ve C vitamininin etken maddelerinin eş zamanlı tayini için kullanarak istatistiksel olarak daha güvenilir sonuçlar elde edilmiştir. Günlük hayatımızda önemli bir yeri olan Parasetamol , Asetilsalisilik asit ve C vitamininin etken maddelerinin sağlık açısından analizini aynı zamanda klasik yöntemle de değerlendirerek, klasik ve yeni geliştirilen spektrofotometrik -kemometrik yöntem ile istatistiksel olarak kıyaslanmasını sağlamıştır. Anahtar kelimeler: Parasetamol , Asetilsalisilik asit, C vitamini, Kemometri.
701
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Paracetamol, Acetylsalicylic Acid and Vitamin C Drugs With Multiple Linear Regression Semih KÖLEMEN1,*, Güzide Pekcan ERTOKUŞ2 1
Suleyman Demirel University, Isparta, Turkey Suleyman Demirel University, Isparta, Turkey *Responsible author e-mail:
[email protected] 2
Abstract Chemometry, a new statistical method for the simultaneous spectrophotometric determination of paracetamol, acetylsalicylic acid and vitamin C active substances, has been used in chronic headache, toothache, neuralgia, sciatica pain, feverish illness, fever reduction in flu and colds, . In this new statistical method, the data were evaluated with multiple linear regression. Statistically more reliable results have been obtained by using chemometric techniques for the simultaneous determination of paracetamol, acetylsalicylic acid and vitamin C active ingredients, allowing spectrophotometric analysis as if it were, without any pre-separation of complex systems. Paracetamol, which has an important place in our daily life, has made statistical comparisons with the classical and newly developed spectrophotometric-chemometric methods by evaluating the health aspects of the active substances of acetylsalicylic acid and vitamin C with the classical method at the same time. Key words: Paracetamol, Acetylsalicylic acid, Vitamin C, Chemometry.
702
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Türkiye Besi İşletmeleri Sürdürülebilirliğinde Teknolojik Gelişmelerin Katkısı Serap GÖNCÜ1,*, Muhammet İkbal YEŞİL,Özgül ANİTAŞ1,Esra Ayça SOYSAL1 Çukurova üniversitesi, Adana, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
Özet Hızla artan Türkiye nüfusunu güvenli gıda talebinin, birim başa verimleri ve üretim etkenliğini artırmadan karşılanması mümkün değildir. Özellikle kırmızı et üretiminde %90 ile katkı sağlayan sığır yetiştiriciliği bu anlamda öncelikli konuma sahiptir. Çünkü birim başa verimler ve üretim etkenliği konuları Türkiye’de çok düşük düzeydedir. Türkiye’de besi işletmelerinin yaklaşık %76`sının kapasitesi 1-10 baş arasındadır. 50 ve daha fazla hayvan besleme kapasitesinde olan işletmelerin payı ise %3,5’dur. Ülkemizde besiye alınan hayvanların %65' ini yerli sığır ırkları, %35'ini ise kültür ırkı ve melezi sığırlar oluşturmaktadır. Kültür ırklarında günlük canlı ağırlık artışı 1400-1600 g , melezlerde ise 1100–1500 gr arasındadır. Büyük işletmelerde çok yüksek genetik değeri olan hayvanlardan teknoloji ve otomasyon sistemlerini kullanmadan beklenen performansın alınması ise mümkün olamamaktadır. İleri teknolojilerin sürü yönetimi alanında kullanılmasıyla gerçekleştirilebilecek olan hayvancılık, yetiştiriciye, hayvana ve tüketiciye yararlar sağlayacaktır. Sürdürülebilir üretimde mevcut kaynakların etkin kullanımı, hayvanın sahip olduğu genetik performansın elde edilebilmesi, takip ve kontrol ile zamanında müdahale edilerek istenen hedefleri yakalamak mümkündür. Bireysel takip, tartım, ölçüm, yem tüketimi ile üretim etkenliği ve birim başa verimlilik tespiti yapılıp iyileştirme olanakları aranması verimliği ve sürdürülebilirliği sağlayacaktır. Bu bağlamda bu çalışmada, elektronik tanımlama, gruplama sistemi, vücut kondisyon ve topallık tespiti, canlı hayvan da yağlılık durumu tespitine yönelik elektronik sistemler ve sürü yönetim yazılımları bir arada değerlendirilmeye çalışılacaktır. Ancak bu sistemlerden beklenen faydaların elde edilebilmesi sistemlerin sahip olduğu fonksiyonların bilinmesi ve etkin kullanımları ile mümkündür. Bu çalışmada mevcut teknolojik uygulamalar ve karlı ve sürdürülebilir üzerine değerlendirmeler yapılması amaçlanmıştır. Anahtar kelimeler: Türkiye Süt Sığırcılığı, Döl Verimi, Teknolojiler.
703
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Technologic Development Effects on Turkish Fattening Enterprises Sustainability Serap GÖNCÜ1,*, Gökhan GÖKÇE1, Özgül ANİTAŞ1,Esra Ayça SOYSAL1 Çukurova Üniversity, Adana, Türkiye *Responsible author e-mail:
[email protected] 1
Abstract It is not possible to meet the demand of increasing Türkish population for safe food without increasing unit productivity and production efficiency. Especially cattle breeding contributes 90% in the production of red meat. Because unit productivity and production efficiency issues are very low in Turkey. The capacity of approximately 76% of the fattening operations in Turkey is between 1-10. The share of enterprises with 50 or more animal feeding capacities is 3.5%. Domestic cattle breeds constitute 65% of the fattening animals in our country, and 35% of them are culture bred and crosses. The daily live weight gain in culture breeds is between 1400-1600 g, and between 1100-1500 g in crosses. In large enterprises it is not possible to obtain the expected performance without using technology and automation systems from animals with very high genetic values. Livestock producesr and consumers will benefit from the use of advanced technologies in herd management. It is possible to achieve the desired targets by effective utilization of available resources in sustainable production, to obtain the genetic performance that the animal potential, by follow-up and control, and by timely intervention. Individual pursuit, weighing, measurement, feed consumption, production efficiency and unit productivity will be determined and improvement opportunities will be sought for efficiency and sustainability. In this context, in this study, electronic identification, grouping system, body condition and lameness detection, electronic systems for determining fatness status in live animals and herd management softwares will be tried to be considered together. However, it is possible to obtain the benefits expected from these systems by knowing the functions of the systems and using them effectively. In this study, it is aimed to make evaluations on existing technological applications and profitable and sustainable. Key words: Technology usage , Turkish Dairy Farms, Reproductive perfomances, sustainability.
704
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Türkiye Süt Sığırcılığı İşletmelerinde Sürdürülebilir Süt Sığırcılığı Döl Verimi Yönetiminde Teknoloji Kullanımı Serap GÖNCÜ1,*, Özgül ANİTAŞ1, Gökhan GÖKÇE1, Muhammet İkbal YEŞİL1 Çukurova üniversitesi, Adana, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
Özet Ülkemiz et ve süt üretiminin artırılması ineklerin döl verimi, ömür boyu verim düzeyleri veya yılda işletmelerde üretilen buzağı sayısına bağlıdır. Bu nedenle, yılda elde edilen ve canlı büyütülerek sürüye katılan buzğı sayısı artırılmalı, erken kesim veya verimsiz ömür süreleri azaltılmalıdır. Sonuçta elde edilen hayvan sayısı ve bunlardan etkin faydalanabilme becerisi kritik önem sahiptir. Ancak Türkiye’de olduğu gibi bir çok ülkede de çeşitli açılardan kayıplar yaşanmaktadır. Ülkeler ve çiftliklere göre üreme etkenliği farkllılk gösterse de yıllık ortalama sürü üreme performansı istenilen dzüeylerde değildir. Sürü yöentim uygulamaları plasentanın atılamaması, uterus enfeksiyonu döl tutma oranı, servis peryodu uzatmaktadır. Iyi bir döl verim yöentim programı bu konularda çok büyük fark oluşturmaktadır. En iyi sürü döl verim yöentim programında ise zamanlama, etkin gözlem ve otomasyon sistemelri kullanımı ile başlamaktadır. Bu konularda ise inek davranışları, kızgınlığa ait özel davranışların doğru tespiti ve yorumlaması kritik önem taşımaktador. Bu nedenle bu konuda çalışanların iyi klayıt tutması ve bublkarı değerldnrierek sürü yönetiminde kullanması çok önemlidir. Genellikle en iyi kızgınlık tespit sonucuna sahip olan yetiştriclerin birkça yöentmi bir arad akullandıkları ve değerlendirmede kulandıkları anlaşılmaktadır. Bu konuda bir çok aletrnatif metod mevcuttur. Östrusun saptanması için birçok metod geliştirilmiş olsa da etkin sonuçlar konsudna etkili ve tekbaşına yeterli olan bir metod henüz yoktur. Bu konuda halen çalışmalara ihtiyaç duyulmaktadır. Anahtar kelimeler: Türkiye Süt Sığırcılığı, Döl Verimi, Teknolojiler.
705
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Technology Usage at Turkish Dairy Farms to Sustainable Reproductive Perfomances Serap GÖNCÜ1,*, Özgül ANİTAŞ1, Gökhan GÖKÇE1, Muhammet İkbal YEŞİL1 1 Çukurova Üniversity, Adana, Türkiye *Responsible author e-mail:
[email protected]
Abstract If meat and milk production are to be increased in our country, cow productivity, i.e. the number of calves produced per lifetime or per unit land area, must be improved and increased and the time from birth to slaughter must be reduced. The number of animals available for finishing is also critical. Many farm have tol ive eith these loses. Although varying among herds, annual average herd incidences of reproductive disorders and reproductive performance were similar to those reported. Managerial practices influenced incidences of retained placenta and uterine infection, days open of cows not bred and of all cows, services per conception, and percentages of herd open more than 100 days and culled for low production. Good heat detection programs can have a major impact on overall herd reproductive performance. The best heat detection programs start with careful timing, good observation and the effective use of detection aids. Being able to distinguish and interpret cow behaviour and other signs is critical – so are good record keeping and training for the people responsible for heat detection. Generaly farmers farmers with the best heat detection results use a combination of observation and heat detection aids. Several options are available to aid heat detection and increase heat detection rates. Although a rich variety of methods has been introduced for the detection of oestrus, a more accurate and practical method is still required. Key words: Technology usage , Turkish Dairy Farms, Reproductive perfomances, sustainability.
706
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Yaşanabilir Şehirler için Sürdürülebilirlik ve Sürdürülebilir Gelişme Sevde DERMAN1,*, Ümmügülsüm TER2 Necmettin Erbakan Üniversitesi, Mühendisli-Mimarlık Fakültesi, Şehir ve Bölge Planlama Bölümü, Konya, Türkiye 2 Necmettin Erbakan Üniversitesi, Mühendisli-Mimarlık Fakültesi, Şehir ve Bölge Planlama Bölümü, Konya, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
Özet Sürdürülebilirlik kavramı günümüzde bir çok disiplin tarafından farklı alanlarda ele alınmaktadır. Sürdürülebilirlik, devamlılık arz eden toplumsal, ekonomik veya ekolojik herhangi bir sistemin fonksiyonlarının kullanılan kaynakları bozmadan ve tüketmeden aralıksız olarak devam etmesini öngören, yüksek verimliliği hedefleyen anahtar bir kavramdır. 21. Yüzyılın başı, teknolojideki ve sanayideki gelişmelerin, kaynaklara erişimin doruğa ulaştığı bir dönüm noktası olurken, ekolojik dengenin bozulması ve doğal kaynakların yok olması ise bu gelişmelerin bedeli olmuştur. Hızlı nüfus artışı ve kontrolsüz büyüme karşısında kentlerde karşılaşılan sosyal ve çevresel problemler, kentsel yaşam kalitesini oldukça düşürmektedir. Tüm bu gelişmeler sonucunda kentler daha tüketim odaklı bir oluşumun içine girerken, bireylerin kentsel alandaki hareketlilikleri ve davranışları yeni sorunsalları da beraberinde getirmektedir. Sürdürülebilir gelişme kavramı bu süreçte küresel düzeyde tartışılmaya başlanmış, sosyal ve ekonomik gelişmenin tek önceliği haline gelmiştir. Sürdürülebilir gelişmeyi kentsel yaşama adapte edebilmek için çevre koruma, ekonomik verimlilik ve sosyal ilerlemenin arasındaki bağı kurmak gerekir. Sürdürülebilir kentlerde kalkınma sağlanırken temel amaç, yaşam kalitesini yükseltmek ve bunu yaparken çevresel politikalar oluşturarak hedeflenen sosyo-ekonomik düzeye erişmektir. Sürdürülebilir bir toplum çevreden, ekonomiden yarar sağlarken gelecek nesillerin refahını etkilememelidir. Bu bağlamda çalışmada “yaşam kalitesi”, “yaşanabilirlik” ve “sürdürülebilirlik” kavramları arasındaki ilişkiler ortaya konarak, kentlerin yaşam kalitesinin arttırılması için geliştirilen stratejilerin, sürdürülebilir gelişmenin sağlanmasındaki rolünün irdelenmesi amaçlanmaktadır. Anahtar kelimeler: Yaşam Kalitesi, Yaşanabilirlik, Sürdürülebilirlik, Sürdürülebilir Gelişme.
707
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sustainability and Sustainable Development for Livable Cities Sevde DERMAN1,*, Ümmügülsüm TER 2, 1
Necmettin Erbakan University, Faculty of Engineering and Architecture, Department of City and Regional Planning, Konya, Turkey 2 Necmettin Erbakan University, Faculty of Engineering and Architecture, Department of City and Regional Planning, Konya, Tuırkey *Responsible author e-mail:
[email protected]
Abstract The concept of sustainability is now being addressed by many disciplines in different fields. Sustainability is a key concept for high efficiency that envisages that the functions of any social, economic or ecological continuity system will go on without disrupting and without consuming the resources. The beginning of the 21. century has been a turning point in technology and industrial developments reaching the peak access to resources, whereas the degradation of ecological balance and the destruction of natural resources has been a severe result. In the face of rapid population growth and uncontrolled growth, the social and environmental problems encountered in the cities considerably reduce the quality of urban life. As a result of all these events, cities become more consumption-oriented, while the mobility and behavior of individuals in urban areas brings out new problems. The concept of sustainable development has been discussed on a global scale in this process and become the sole priority of social and economic development. In order to adapt sustainable development to urban life, it requires to establish a link between environmental protection, economic efficiency and social progress. In sustainable urban development, the main goal is to raise the quality of life and meet the targeted socio-economic conditions by creating environmental policies in doing so. It should not have an impact on the prosperity of future generations when a sustainable society benefits from the environment and the economy. In this context, the relation between the concepts of "quality of life", "livability" and "sustainability" is aimed to examine the role of the strategies that are developed for increasing the quality of life of the cities in ensuring sustainable development. Key words: Life Quality, Livability, Sustainability, Sustainable Development.
708
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürdürülebilir Mimari Kapsamında Geliştirilen Teknoloji ve Ürünler Sevim ATEŞ CAN1,*, Duygu KURTOĞLU2 1 2
Mehmet Akif Ersoy Üniversitesi, Mühendislik-Mimarlık Fakültesi, Mimarlık Bölümü, Burdur, Türkiye Mehmet Akif Ersoy Üniversitesi, Mühendislik-Mimarlık Fakültesi, Mimarlık Bölümü, Burdur, Türkiye *Sorumlu yazar e-posta:
[email protected]
Özet Dünyanın geleceğini ve bununla birlikte insan neslinin devamını ilgilendiren “sürdürülebilirlik” kavramı, farklı disiplinlere göre geniş bir yelpazede tanımlanabilmektedir. Mimarlık alanındaki tanımı, enerji kaynaklarını sorumsuzca tüketmeyen ve planlama aşamasından itibaren çevre koşullarına uyumlu hareket eden bir mimari olarak açıklanabilir. Çünkü, inşaat sektörü önemli bir enerji ve malzeme kullanıcısı olarak doğaya ve doğal kaynaklara büyük ölçüde zarar vermektedir. Bu nedenle, sürdürülebilir bir mimari, tasarım aşamasından başlayarak uygulama, kullanım ve yıkım aşamalarında da, doğaya en az zarar veren, yenilenebilir enerji kaynaklarını kullanan, yerel, çevreye zararsız ve geri dönüştürülebilen malzeme ve yerel işçilik kullanımını amaçlayan bir mimaridir. Bu kapsamda çevre, toplum, kültür ve ekonomi boyutları ile sürdürülebilir kalkınma için önemli bir rol üstlenmektedir. Çevre sorunlarının evrensel bir boyut kazanması sonucunda, 1970’lerden itibaren oluşan küresel boyuttaki farkındalık, çevreye duyarlı ve enerji kaynaklarının bilinçli kullanımı ve paylaşımını hedefleyen “sürdürülebilirlik” kavramı ile mimari planlamalarda enerji etkin, çevre ve doğa ile uyumlu bir mimari yaklaşımı ortaya çıkartmıştır. Bu kapsamda da, mimari tasarım sürecinde binaları doğrudan ilgilendiren planlama kararlarının yanı sıra, binaları yaşam döngüsü süresince doğal kaynakların etkin ve verimli kullanımı konusunda destekleyen teknoloji ve ürünler de önem taşımaktadır. Bu makalede, bu teknoloji ve ürünler, kullanım yerleri ve sağladıkları avantajlara değinilerek detaylı bir şekilde ele alınacaktır. Böylelikle, sürdürülebilir mimari açısından yaşam alanlarına katkı sağlayacak çözümler ile konuya dikkat çekilecek ve farkındalık sağlanacaktır. İnsan sağlığına, konforlu yaşama ve enerji etkin özelliklere sahip olan bu yeni ürün ve teknolojilerin üretiminin ve kullanımının artmasının özendirilmesi ile de ekolojik dengenin korunumunun sağlanmasına katkı oluşturulması hedeflenmektedir. Anahtar kelimeler: Sürdürülebilirlik, sürdürülebilir mimari, enerji etkin yapı.
709
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Technologies and Products Developed in the Context of Sustainable Architecture Sevim ATEŞ CAN1,*, Duygu KURTOĞLU2 1
Mehmet Akif Ersoy University, Faculty of Engineering and Architecture, Department of Architecture, Burdur, TURKEY 2 Mehmet Akif Ersoy University, Faculty of Engineering and Architecture, Department of Architecture, Burdur, TURKEY *Responsible auther e-mail:
[email protected]
Abstract The concept of "sustainability", which concerns the future of the world and the continuity of the human generation, could be defined in a wide variety of disciplines. The definition in the architectural scope could be explained as an architecture that does not consume energy resources irresponsibly and acts in harmony with environmental conditions from the planning stage. Because the construction industry causes negative impact to nature and natural resources as an important consumer of energy and materials. So that, a sustainable architecture is an architecture that aims using local renewable energy sources, harmless to the environment and recyclable materials and local labor, starting from the design phase, and at the stages of application, use and destruction. In this context, it plays a crucial role for sustainable development with the dimensions of environment, society, culture and economy. As a result of the universal dimension of environmental problems, the awareness in the global dimension has created an architectural approach compatible with energy efficient, environment and nature in architectural plans with the concept of "sustainability" aiming at environmentally aware and conscious use and sharing of energy resources since the 1970's. In this context, besides the planning decisions that directly concern the buildings in the architectural design process, the technologies and products that support the effective and efficient use of natural resources during the life cycle of the buildings are also important. In this article, these technologies and products will be approached in detail, with reference to the location and advantages. Thus, awareness will be provided and attention will be drawn to the issues with solutions that contributing the living spaces in terms of sustainable architecture. It is aimed to contribute to the protection of ecological balance by promoting the production and use of these new products and technologies which have human health, comfortable living and energy efficient properties. Key words: Sustainability, sustainable architecture, energy efficient structure.
710
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürdürülebilir Mimari Kapsamında Yenilikçi Bina Kabuğu Tasarımları Sevim ATEŞ CAN1,*, Duygu KURTOĞLU2 1 2
Mehmet Akif Ersoy Üniversitesi, Mühendislik-Mimarlık Fakültesi, Mimarlık Bölümü, Burdur, Türkiye Mehmet Akif Ersoy Üniversitesi, Mühendislik-Mimarlık Fakültesi, Mimarlık Bölümü, Burdur, Türkiye *Sorumlu yazar e-posta:
[email protected]
Özet Binalar, Endüstri Devrimi’ne kadar yerel malzeme ve kısıtlı teknolojilerle inşa edilmekteydi. Endüstri Devrimi sonucunda, yeni malzeme ve teknolojilerin kullanılmaya başlanması ile özellikle bina kabuğunun tasarım ve uygulamalarında önemli bir aşama kaydedilmiştir. Günümüzde ise, sürdürülebilir mimari kapsamında yenilenebilir enerji kaynaklarını kullanarak kendi enerjisini üretebilen, enerji verimliliği ve korunumu yüksek cephe tasarımları önem kazanmaktadır. Bu konu kapsamında yapılan çalışmalar yeni anlayışta bina kabuklarının tasarlanmasını mümkün kılmaktadır. Sürdürülebilir bina tasarımında, bina kabuğu tek başına önemli bir yer tutmaktadır. Enerji korunumunu sağlarken iç ortamın da sağlık ve konfor şartlarını oluşturmaktadır. Bu bildiride, sürdürülebilir mimari kapsamında, bina kabuğu tasarımı ve uygulama alanındaki gelişmelere değinilecektir. Tasarımı yönlendiren sistem ve malzemeler irdelenecektir. Amaç, sürdürülebilir mimari tasarımlara katkı sağlamak ve bu kapsamda ileriye dönük çalışmalara ışık tutmaktır. Anahtar kelimeler: Sürdürülebilir mimari, sürdürülebilir tasarım, bina kabuğu, sistem ve malzemeler.
711
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Innovative Building Design in Scope of Sustainable Architecture Sevim ATEŞ CAN1,*, Duygu KURTOĞLU2 1
Mehmet Akif Ersoy University, Faculty of Engineering and Architecture, Department of Architecture, Burdur, TURKEY 2 Mehmet Akif Ersoy University, Faculty of Engineering and Architecture, Department of Architecture, Burdur, TURKEY *Responsible auther e-mail:
[email protected]
Abstract The buildings were structured with local materials and limited technology until the Industrial Revolution. As a result of the Industrial Revolution, the introduction of new materials and technologies has specially made a considerable improvement in the design and implementation of building shells. Nowadays, energy efficiency and conservation-friendly façade designs that can produce their own energy by using renewable energy sources within the scope of sustainable architecture became significant. Studies carried out within the scope of this subject make it possible to design building shells in a new perspective. The building envelope alone has an important place in sustainable design. By providing energy conservation, it also creates health and comfort conditions in the interior. In the context of sustainable architecture, this study will address the developments of building shell design and its applications. The systems and materials that guide design will be examined. The aim is to contribute to sustainable architectural designs and shed light on future work. Key words: Sustainable architecture, sustainable design, building envelope, systems and materials.
712
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürdürülebilirliğin Algılanması ve Uygulanması: Türkiye’deki İşletmelere Dönük Bir Değerlendirme Dilek YILMAZ BÖREKÇİ1,Sinem BÜYÜKSAATÇI KİRİŞ2,* İstanbul Üniversitesi, İstanbul, Türkiye İstanbul Üniversitesi, İstanbul, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2
Özet Dünya nüfusunun her geçen gün yükselen bir ivmeyle artması sonucu tüketim de hızla artmaktadır. Tüketim ile birlikte üretimin artması; çevresel boyutta kirliliğe, doğal kaynakların ve çeşitliliğin azalmasına neden olmakta, ekonomik boyutta dünya genelinde üretim ve hizmetlerin devamlılığına dair tehdit oluşturmakta, sosyal boyutta ise değişen ekonomik dengeler sonucu toplumun farklı kesimlerinin sosyal haklar ve hizmetlere erişimi eşit düzeyde gerçekleştirilememektedir. Bu nedenle, gelecek nesillerin kendi ihtiyaçlarını karşılama kabiliyetinden ödün vermeksizin, günümüz nesillerinin ihtiyaçlarını karşılamayı hedefleyen “sürdürülebilirlik” yaklaşımı; 1990’lı yıllardan günümüze ekonomik, çevresel ve sosyal boyutlarıyla toplumun davranışları ve işletmelerin faaliyetleriyle bütünleşmeye devam etmektedir. Bu çalışmada, Türkiye’deki işletmelerde sürdürülebilirliğin nasıl algılanıp uygulandığına ve üçlü bilanço boyutlarının ne kadar benimsendiğine dair bir değerlendirmede bulunulmuştur. İstanbul Sanayi Odası’nın 2015 yılı verilerine göre, Türkiye’nin üretim kapasitesine göre önde gelen ilk 100 firmasının web sitelerinden sürdürülebilirlik raporları, çevre politikaları, kalite politikaları, sosyal sorumluluk politikaları gibi sürdürülebilirliğe dair firmalar tarafından paylaşılan yazılı ve görsel tüm dokümanlar elde edilmiş ve bu nitel veriler üzerinden MAXQDA programı kullanılarak içerik analizi yapılmıştır. Analiz sırasında kodlanacak anahtar kelimeler, literatüre bağlı kalarak sürdürülebilirliğin üçlü bilanço boyutları için ayrı ayrı oluşturulmuştur. Yapılan analiz neticesinde firmaların %73’ünün sürdürülebilirliğin üç boyutunu da anladığı ve benimsediği görülmüştür. Bununla birlikte, sürdürülebilirlik raporuna sahip firma sayısı %16 olup, tüm üçlü bilanço boyutlarını belirlenen anahtar kelimeler ekseninde %75’in üzerinde anlayan firma sayısı ise %7’dir. Anahtar kelimeler: içerik analizi, sürdürülebilirlik, nitel veri analizi, üçlü bilanço yaklaşımı.
713
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Perception and Implementation of Sustainability: An Assessment Regarding Turkish Companies Dilek YILMAZ BÖREKÇİ1, Sinem BÜYÜKSAATÇI KİRİŞ 2,* 1
Istanbul University, Istanbul, Turkey Istanbul University, Istanbul, Turkey *Responsible author e-mail:
[email protected] 2
Abstract As a result of the world population’s growth with an increasing momentum every day, consumption is also increasing rapidly. The increase in production parallel to consumption causes pollution, reduction of natural resources and diversity in the environmental dimension. Besides, in the economical dimension, it poses a threat to the continuity of production and services worldwide. Furthermore, in the social dimension, social rights and services cannot be available equally within the society due to the changing economic balances. Therefore, the "sustainability" approach, which aims to meet the needs of today's generations without compromising the ability of future generations to meet their own needs, continues to integrate with society's behaviours and businesses' activities through its economic, environmental and social dimensions from 1990s onwards. In this study, we assessed how Turkish companies perceived and implemented sustainability and also in what degree they adopted the triple bottom line dimensions. Towards this end, we obtained all written and visual documents in terms of sustainability such as sustainability reports, environmental policies, quality policies and social responsibility policies etc. shared by Turkey’s leading 100 businesses according to the Istanbul Chamber of Industry's data in 2015 and conducted content analysis on these qualitative data using the MAXQDA program. Key words to be coded during the analysis were created separately for the three dimensions of sustainability, depending on the literature. As a result of the analysis, we identified that 73% of the companies understood and accepted the three dimensions of sustainability. However, the number of firms with sustainability reports is 16% and only 7% of the companies understood the triple bottom line dimensions above 75 % regarding our list of key words for each dimension. Key words: Content analysis, sustainability, qualitative data analysis, triple bottom line.
714
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Türkiye’de Kadın Girişimciliğinin Sürdürülebilirliği Songül Sallan Gül1,*, Ayşenur Örümcü2 Süleyman Demirel Üniversitesi, Isparta, Türkiye Süleyman Demirel Üniversitesi, Isparta, Türkiye * Sorumlu yazar e-posta:
[email protected] 1 1
Özet Girişimcilik olgusu kapitalist üretim biçiminin temeli ve girişimcilik de temel istihdam alanlarından biri olmasına karşın, Türkiye’de kadın girişimcilik olgusunun tartışılması 1990’lı yıllarla başlamıştır. Kadın girişimcilik olgusu dışa açık büyüme ve kalkınma odaklı olarak gündeme gelmiş, kadın istihdamının artırılmasına yönelik çabalar kapsamında kurumsal ve yasal gelişmelerle girişimciliğin desteklenmesi süreci ivme kazanmıştır. Kamu ve sivil toplum kuruluşlarının kadın girişimciliğine yönelik eğitim faaliyetleri, destek programları ve teşvikleri artmıştır. Kalkınmada kadın emeğinin toplumsal cinsiyet bağlamında ele alınmasıyla birlikte, kadın girişimcilerin özellikleri ve yaşadıkları sorunlara dikkat çekilmiştir. Bu kapsamda kadın girişimcilerin ekonomik ve kültürel olarak karşılaştıkları ayrımcılıklar da tartışılmaya başlanmıştır. 2000’li yıllarla beraber ise, kadın girişimcilik olgusu yaşanan ekonomik krizler karşısında yoksullukla mücadele kapsamında ele alınmış, sosyal yardım destek programlarıyla küçük girişimcilik faaliyetleri desteklenmiştir. 2010’lı yıllarda da çok sayıda yasal düzenleme ile kadın girişimcilerine yönelik destekler sağlanmıştır. Ancak kadın STK’lar, uluslararası kuruluşlar ve kamunun yürüttüğü çeşitlenen ama koordinasyonsuz proje ve program temelli çabalar, kadın girişimciliğine çok da başarı kazandıramamıştır. 2017 TUİK verileri temelinde Türkiye genelinde işveren olarak çalışanlar içinde kadınların oranı 2015 yılında %8,1 olarak gerçekleşmiştir. Çünkü Türkiye’de kadın girişimciliğine yönelik faaliyet ve destekler, kadın girişimcilerin sorunlarını değerlendirilen ve çözüm yolları geliştiren koordineli ve merkezi bir şekilde yürütülmemiştir. Kamusal desteklerde kadın girişimcilerin toplumsal cinsiyet farklılıklarının görmezden gelinmiştir. Kadın girişimcilere yönelik piyasadaki cinsiyetçi tutumlar, cinsiyet temelli kadınsı işleri kapsayan sektörel ayrışmalar, kültürel engeller ve kadın istihdamı üzerindeki yapısal faktörler de dikkate alınmadığından kadın girişimciliğinin sürdürülebilirlik sorunu halen devam etmektedir. Bu bildiride kadın girişimciliğinin Türkiye’deki gelişimi ve geleceği sorunu ekonomik ve sosyal sürdürülebilirlik bağlamında tartışılmaktadır. Kadın girişimciliği üzerine yapılan bilimsel çalışma, tez ve raporlar temelinde kadın girişimciliğinin sürdürülebilirlik sorunu bilimsel yazın kapsamında değerlendirilmektedir. Anahtar kelimeler: Türkiye, kalkınma, girişimcilik, kadın girişimciliği, sosyal sürdürülebilirlik.
715
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sustainability of Women Entrepreneurship in Turkey Songül Sallan Gül1,*, Ayşenur Örümcü2 Süleyman Demirel Üniversitesi, Isparta, Türkiye Süleyman Demirel Üniversitesi, Isparta, Türkiye * Responsible author e-mail:
[email protected] 1 2
Abstract Although entrepreneurship is the basis of capitalist production and one of the basic employment areas, the debate on women entrepreneurship in Turkey began in the 1990s. Female entrepreneurship has come to the fore with a focus on open growth and development, and the process of supporting entrepreneurship with institutional and legal developments has gained momentum as part of efforts to increase women's employment. Educational activities, support programs and incentives for women's entrepreneurship of public and non-governmental organizations have increased. With a gendered point of view dealing with the women labor in development, the characteristics of women entrepreneurs and the problems they have experienced have been highlighted. In this context, the economic and cultural discrimination that women entrepreneurs face has started to be discussed. The phenomenon of female entrepreneurship was dealt with in the context of fighting against poverty in 20002 due to the economic crises experienced, and small entrepreneurship activities were supported with social assistance support programs. Supports and subsidies for women entrepreneurs have been provided in a number of legal arrangements in 2010 as well. However, the varied but uncoordinated project and program-based efforts carried out by the government, women's NGOs, and international organizations have not been so successful in women's entrepreneurship. According to TUIK (2017) data, women’s rate was only 8,1% among all employers in 2015. Because, supports and programs evaluating the problems of women entrepreneurs and developing solutions for women entrepreneurship in Turkey have not been carried out in a coordinated and centralized manner. Gender differences of women entrepreneurs have been ignored in public supports. The sustainability problem of women's entrepreneurship still continues, as the gendered attitudes towards women entrepreneurs, sectoral divisions involving genderbased female jobs, cultural barriers and structural factors on female employment are not taken into consideration. In this paper, the problem of development and future of women entrepreneurship in Turkey is discussed in the context of economic and social sustainability. The issue of sustainability of women's entrepreneurship on the basis of theses and reports written on women entrepreneurship is evaluated within the scope of scientific literature. Key words: Turkey, development, entrepreneurship, women entrepreneurship, social sustainability.
716
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Isparta’da Sermayenin Gözünden Mermercilik Sektörünün Sürdürülebilir Kalkınma Sorunsalı Songül Sallan Gül1,*, Onur Uzer2 Süleyman Demirel Üniversitesi, Isparta, Türkiye Süleyman Demirel Üniversitesi, Isparta, Türkiye * Sorumlu yazar e-posta:
[email protected] 1 2
Özet Türkiye, 1980’lerden itibaren doğal taş rezervlerinin yarısını oluşturan mermer sanayi ile dünya ihracatında sekizinci sıraya gelmiş ve mermer odaklı sanayi, Türkiye için önemli bir ekonomik kalkınma öğesi olmuştur. Artan mermer talebi Türkiye örneğinde blok mermer satışı bakımından büyük önem kazanmış, Türkiye 2012 yılında bloka mermer ihracatında dünya birinciliğine çıkmıştır. Pek çok Anadolu kentinde olduğu gibi Isparta’da da, yeni sanayi dallarından olan mermer sanayi, Çin ve ABD başta olmak üzere küresel talep odaklı olarak büyüme sürecine girmiştir. Isparta Sanayi ve Ticaret Odası verileri temelinde 2012 yılında Isparta 17.003.124 dolarlık ihracat yapmıştır. Yine 2014 yılında odaya kayıtlı 104 şirket faaliyet göstermektedir. Isparta’da mermer sanayi 2017 yılında yaklaşık olarak 3 bin kişiye istihdam sağlayarak, mermer sanayinde Türkiye’de 8. Sıraya yerleşmiştir. Mermer sanayinde doğal rezervler bakımdan da oldukça zengin olan ve Osmanlı-Ottoman mermeri olarak adlandırılan özgün cinsi ile öne çıkan Isparta mermer sanayi, kentin ve Batı Akdeniz bölgesinin önemli bir ekonomik gelişme sektörü haline gelmiştir. Bu bildiri de 2017 yılında yapılmış bir saha çalışması kapsamında Isparta’da mermer sanayinin önde gelen temsilci 3 firmanın yönetici/sahipleriyle yapılan görüşmeler ve Isparta mermer sanayi üzerine yapılmış olan çalışmalar ışığında sermayenin gözünden mermer sanayinin ekonomik sürdürülebilirliği tartışılmaktadır. Anahtar kelimeler: Mermer sanayi, sermaye, sürdürülebilir kalkınma, Isparta.
717
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Sustainable Development Problem in the Eye of Marble Capital Sector in Isparta Songül Sallan Gül1,*, Onur Uzer2 Süleyman Demirel University, Isparta, Turkey Süleyman Demirel University, Isparta, Turkey * Responsible author e-mail:
[email protected] 1 2
Abstract Since 1980’s, the marble industry, which provides half of the natural stone reserves that ranked eighth in world exports, have become an important economic development item for Turkey. Increasing demand for marble has gained great importance in terms of sales of block marble in Turkey, and in 2012 Turkey became the world leader in exports of marble. As it is the case in many Anatolian cities, the marble industry, which is a branch of the new industry, started a growth process in Isparta with a global demand mainly from China and USA. Isparta has exported marble for the worth of $17,003,124 in 2012 based on the data from Isparta’s Industry and Commerce Association (I.I.C.A). Again in 2014, 104 marble companies were registered in I.I.C.A. The marble industry in Isparta provided employment for approximately 3.000 people in 2017 and placed at the 8th place in Turkey. The marble industry in Isparta is rich in natural reserves, stands out with its original genus called Ottoman marble, and has become an important economic development sector for the province and the western Mediterranean region. In this paper, the economic sustainability of the marble industry is discussed on the base of the data gathered from in-depth interviews with the owners/managers of the 3 marble companies in Isparta in 2017 and the studies on the marble industry in Isparta. Key words: Marble industry, capital, Sustainable Development, Isparta.
718
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Kültürel Sürdürülebilirlik Açısından Isparta Üzüm Pazarı S.Cevat ÇEVRİMLİ 1,*, Hasan Ş.HAŞTEMOĞLU2 Süleyman Demirel Üniversitesi, Isparta, Türkiye Süleyman Demirel Üniversitesi, Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2
Özet Sürdürülebilirlik kavramı başlangıçta sadece çevresel düzlemde ortaya koyularak sınırlandırılmaya çalışılmasına rağmen 2000’lerde ekonomik, sosyal ve ekolojik bileşenler üzerine inşa edilerek kavuştuğu içerikle evrensel boyutta hemen her konu başlığına eklemlenebilecek konuma gelmiştir. Bu bağlamda kültürel sürdürülebilirlik kavramı kültürel mirasın korunumu açısından önemli dayanak noktasıdır. Geleneksel Türk Çarşıları da kültürel mirasımızın korunması yönünden hem mimari hem de sosyal içeriği ile dikkat çeken mekânlardır. Öyle ki, yüzyıllardır değişim geçiren ticaret kültürü günümüzde yeni bir boyut kazanmıştır. Selçuklular döneminden başlayarak Osmanlılar döneminde gelişen geleneksel çarşı olgusu erozyona uğrayarak yerini alış veriş merkezlerine bırakmıştır. Temelde alış veriş merkezlerinin atası kabul edilen geleneksel çarşılar kentin merkezi konumundan, kent merkezinin sorunlu alanları şekline dönüşmüştür. Bu kentsel mekânlar yeni projelerle sürekli küçülürken, geleneksel çarşı kültürü de beraberinde kaybolmaktadır. Isparta Üzüm Pazarı bu bağlamda pek çok Anadolu kentinde görülebilen bir dönüşüm yaşamaktadır. Öyle ki, çarşı kent merkezinde bulunmasından dolayı önemli bir ekonomik potansiyel barındırmasına rağmen, koruma altına alınarak kaybolması engellenen çarşıda tarihi yapıların korunumu sağlanamamaktadır. Geçmiş yerel yönetimlerin yanlış politikaları sonucunda ise yasal süreçler çarşı esnafını zor durumda bırakmakta, çarşı her geçen gün boşaltılan dükkânlarla ekonomik değerini de kaybetmektedir. Ancak el halısı ve gülüyle ünlü kentte alanın turizme yönelik bütüncül proje çalışmaları yapılarak kullanımı mümkündür. Bu çalışmada Isparta Üzüm Pazarı özelinde kültürel sürdürülebilirlik yaklaşımı açısından geleneksel Türk çarşıları için durum tespiti yapılmıştır. Anahtar kelimeler: Kültürel sürdürülebilirlik, Geleneksel Çarşı, Üzüm Pazarı.
719
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Isparta Üzüm Pazarı in Terms of Cultural Sustainability S.Cevat ÇEVRİMLİ 1,*, Hasan Ş.HAŞTEMOĞLU 2 Süleyman Demirel Üniversitesi, Isparta, Türkiye Süleyman Demirel Üniversitesi, Isparta, Türkiye * Responsible author e-mail:
[email protected] 1
2
Abstract Although the concept of sustainability was initially limited only to the environmental level, it was built on the economic, social and ecological components in the 2000s, and now has the potential to be added to the topic at a universal scale. In this context, the concept of cultural sustainability is an important basis for the protection of cultural heritage. Traditional Turkish bazaars are places that draw attention with their architectural and social content due to the protection of our cultural heritage. So much so that trade culture that has changed for centuries has gained a new scale nowadays. The traditional bazaar that developed during the Ottoman period, starting from the Seljuk period, has degenerated and left its place to shopping centers. The traditional bazaars, which are basically the bases of the shopping malls, have become the center of the city and the problematic areas of the city center have become shaped. While new projects are constantly shrinking in these urban spaces, traditional bazaar culture disappears. The Isparta Üzüm Pazarı is undergoing a transformation that can be seen in many Anatolian cities. Even so, despite the fact that the bazaar has a significant economic potential due to its being located in the center of the city, there is no protection of historic buildings in the bazaar, which is prevented from being lost and protected. If past local governments are the result of wrong politics, legal processes leave market traders in a difficult situation and the market loses its economic value with the deserted shops. However, it is possible to use it by making holistic project works aimed at tourism in the city in the famous city with hand carvings and laughs. In this study, the situation was determined for traditional Turkish bazaars in terms of cultural sustainability approach in Isparta Üzüm Pazarı. Key words: Cultural Sustainability, Traditional Market, Üzüm Pazarı.
720
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Romaika Konuşan Toplulukta Göç Olgusu Üzerinden, Konut Tasarımında Yerel; Doğal Ve Kültürel Veri Etkisini İncelemek İçin Bir Model Önerisi Sümeyra EROĞLU1,*, Yüksel DEMİR2 Gebze Teknik Üniversitesi, Kocaeli, Türkiye İstanbul Teknik Üniversitesi, İstanbul, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2
Özet Amaç: Bu çalışmada Romaika konuşan toplulukta göç olgusu üzerinden, konut tasarımında yerel; doğal ve kültürel veri etkisini incelemek için bir model önerisi üretilmiştir. Yerel verilerin etkisiyle evrimsel bir gelişmeyle oluşan yerel mimariler; çevresine zarar vermeyen, doğayla uyumlu şekilde, hizmet ettiği toplumun maddi, biyososyal, psikolojik ve ruhsal seviyedeki ihtiyaçlarına cevap vererek, yüksek bir refah seviyesi sağlayan, kalıcı olmayıp, doğa içinde var olduğu gibi doğa içinde yok olabilen, yere ait ve kendine özgü bir kimlik oluşturan özellikleriyle, günümüz plancılar ve mimarlar tarafından şekillendirilen yaşama alanlarından çok daha başarılı örneklerdir. Günümüz konut yaşam alanları ise, modernizmin standartlaşan bir görüntüye ulaşan işlevsel yaklaşımlarıyla, kültürel etkilerin okunmadığı kimliksiz çevreler veya postmodernizm etkisinde yerel mimarilerin değişik kopyalarının ‘kitch’ uygulamalarla yanyana getirildiği, kimlik ve dönem kargaşası yaşatan değişik örneklerle oluşturulmaktadır. Hem modernizmin sorgulayan bakış açısını ve yenilikçi arayışını içinde barındıran, hem de yerel mimarilerin başarısının arkasındaki etkilerin araştırılmasıyla elde edilen bilgilerden faydalanılarak tasarlanan-üretilen konutların günümüz mimari problemlerine çözüm olarak önerilebileceği öngörülen bu çalışmada; üretilen modelden elde edilen bilgilerin, doğal ve kültürel açılardan daha sürdürülebilir mimari çevreler elde etmek için fayda sağlaması hedeflenmektedir. Kapsam: Konut tasarımında yerel veri kullanımında göz önünde bulundurulması gereken iklim, bitki örtüsü, topoğrafya, manzara, doğal kaynaklar, kültür, aile ve toplum yapısı, yaşam tarzı, üretim biçimleri gibi etkenler belirlenip, yapılan literatür taramasıyla doğal veri ve kültürel veri başlıkları altında kategorize edilmiştir. İnsan-doğa-kültür ilişkileri bağlamında, konut tasarımında yerel; doğal ve kültürel veri etkisini incelemek için bir model önerisi üretilmiştir. Model önerisi göçle ilişkilendirilerek, Trabzon ili Çaykara ilçesinde, Romaika konuşan halkın yaşadığı bazı köylerin; nüfus yoğunluğu, arazi kıtlığı, tarıma elverişsiz eğim ve iklim koşulları ve değişik dönemlerde meydana gelen sel ve heyelan gibi doğal afetler ve olumsuz şartlar sebebiyle, 1929-1974 yılları arasında devlet tarafından planlanan iç iskan projeleri kapsamında, ülkenin çeşitli bölgelerine (Trabzon-Maçka-Pelitli, Erzurum-Tercan-Mercan-Çayırlı, Van-Özalp, Hatay-Reyhanlı, Bursa-Orhangazi, Bayburt, Muş, Çanakkale-Gökçeada ve KKTC-İskele) verdiği göçlerin yer aldığı harita üzerinde, göçlerin gerektirdiği farklı yerleşme durumları (göç öncesi durum, mevcut terk edilmiş konutlara yerleşme, devlet [üst el] tarafından planlanmış konutlara yerleşme, kullanıcı konutu kendi tasarladığında konutlara yerleşme) ile geliştirilmiştir. Sonuç: Ülkenin Doğu Karadeniz Bölgesi’nden farklı coğrafya ve kültürleri barındıran değişik bölgelerine gerçekleşen bu göçler üzerinden
721
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
önerilen model önerisinin, gerekli bölgelerdeki araştırmalar yapıldığında, hem göç veren hem de göç alan farklı bölgelerden elde edilen yerel mimarilerde etkili doğal ve kültürel verilerin saptanmasında kullanılabileceği ve elde edilen bu bilgilerin günümüz mimari çevreleri için doğal ve kültürel sürdürülebilirlik açısından faydalı olacağı öngörülmüştür. Modelin, her yerin kendi gerekliliklerine göre uyarlanması durumunda, farklı göç örnekleri için de kullanılabilir olduğu öngörülmüştür. Anahtar kelimeler: Romaika, yerel veri, doğal veri, kültürel veri, mimari tasarım, göç olgusu.
Yazar Notu: Bu çalışma İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, Mimari Tasarım Yüksek Lisans Programı kapsamında yayınlanmış, danışmanlığı Doç. Dr. Yüksel Demir yönetiminde yapılan Sümeyra Eroğlu’ya ait “Romaika Konuşan Halkta Göç Olgusu Üzerinden Konut Tasarımında Yerel Veri Kullanımı - Uzungöl-Dönerdere Göçü Örneği” başlıklı yüksek lisans tez çalışmasından üretilmiştir.
722
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
A Model Proposal for Investigating The Effects of Local; Natural and Cultural Data in Housing Design on Migration of the Romaika Speaking People Sümeyra EROĞLU1,*, Yüksel DEMİR 2 1
Gebze Technical University, Kocaeli, Turkey Istanbul Technical University, İstanbul, Turkey *Responsible author e-mail:
[email protected]
2
Abstract Aim: In this study, a model proposal is produced for investigating the effect of using local; natural and cultural data in housing design, through the migration of the Romaika speaking community. Local architectures which have evolutionary development with the influence of the local data are not only sustainable, but also providing a high level of prosperity by responding to the material, biosocial, psychological and spiritual needs of the society in harmony with nature. Like a part of nature, local architectures which can exist and disappear in nature without harmfull effects, are not permanently structures like todays' reinforced concrete buildings, they can adapt to the changing conditions of the nature and culture of human, in time. Beside these properties, having unique identities related to the time and space of the region, local architectures are much more successful examples than the living spaces shaped by present-day planners and architects. In today's residential habitats, we can see two approach; the effect of functional design of the modernism; which reaches a standard housing unit like 2+1 or 3+1 and has not any culturel identity with the influence of international style and 'kitch' practices like copying and using different parts and features of the local architectures in together, which have different styles, under the effect of the postmodernism that creates a chaos of identities in the same place and the same time period. In this study; which proposes, the housing that includes both the innovative perspective of modernization and the effects of the success of the local architectures, as a solution to contemporary architectural problems, it is aimed to benefit from the obtained findings of the produced model, for natural and culturally more sustainable architectural environments. Content: Factors such as climate, vegetation, topography, landscape, natural resources, culture, family structure and community structure, lifestyle and production forms are determined by literature search and categorized under the headings of natural data and cultural data. In the context of human-nature-culture relations, a model proposal has been produced to examine the impact of local; natural and cultural data in housing design. The model proposal is associated with migration from Çaykara district of Trabzon province that have some villages which has Romaika spoken population to Turkey's different regions (TrabzonMaçka-Pelitli, Erzurum-Tercan-Mercan-Çayırlı, Van-Özalp, Hatay-Reyhanlı, BursaOrhangazi, Bayburt, Muş, Çanakkale-Gökçeada ve KKTC-İskele). These migrations were part of the government-planned internal settlement projects between 1929 and 1974 due to some adverse conditions such as population density, land shortage, unfavorable slope and climatic conditions for agriculture and floods and landslides that 723
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
took place during various periods. The model proposal is developed based on the different settlement conditions (Pre-migration situation, Settling in existing abandoned housing, Settling in housing planned by the state, Settling in housing planned by the user) that required by the migrations on the map of migrations. Conclusion: It is foreseen that the proposal model which is associated with these migrations which are from the Eastern Black Sea Region to the different regions of the country that have different geographical and cultural backgrounds, can be used to determine the natural and cultural data that are effective on the migrating and migrated regions' local architecture. This information will be beneficial in terms of natural and cultural sustainability for today's architectural environments. It is predicted that the model can be usefull for different migration cases if each case would be adapted to its own requirements. Key words: Romaika, local data, natural data, cultural data, architectural design, migration.
Author's Note: This study is produced from Sümeyra Eroğlu's thesis "The Use of Local Data on Migration of the Romaika Speaking People – Example of Uzungöl -Dönerdere Migration" which is directed by Assoc. Dr. Yüksel Demir, has been published in Istanbul Technical University, Graduate School of Science Engineering and Technology, Architectural Design Master Program.
724
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Türkiye’de Çevresel Kuznets Eğrisi: ARDL Sınır Testi Yaklaşımı Şadiye OKUTAN1,*, Prof. Dr. Rahmi YAMAK2 Karadeniz Teknik Üniversitesi, Trabzon, Türkiye Karadeniz Teknik Üniversitesi, Trabzon, Türkiye *Sorumlu yazar e-posta:
[email protected],
[email protected] 1
2
Özet Gelir düzeyi ile gelir eşitsizliği arasında ters-U şeklinde bir ilişki olduğunu ileri süren Kuznets hipotezi 1955 yılında ortaya atılmıştır. Yaklaşık 35 yıl sonra dünyada çevre kirliliğinin artması ile birlikte ekonomik büyüme ile çevre kirliliği arasındaki ilişki sorgulanmaya başlanmıştır. 1990’lı yılların başında Grossman ve Krueger (1991) ve Panayotou (1993) çalışmalarında Çevresel Kuznets Eğrisi (ÇKE) yaklaşımının teorik temelleri atılmıştır. ÇKE hipotezi, kişi başına düşen gelir ile çevre kirliliğine neden olan farklı kirleticiler arasında ters-U şeklinde bir ilişkinin bulunduğunu ileri sürmektedir. ÇKE hipotezine göre; ekonomik büyümenin erken dönemlerinde, kirlilik göstergeleri gelirden daha hızlı artmaktadır. Belirli bir gelir düzeyine ulaşıldığında çevresel kirlilik hacmi maksimum olmaktadır. Çevresel kirliliğin maksimum olduğu seviyeden itibaren gelir artışı devam ettikçe çevresel kirlilik hacmi azalmaktadır. ÇKE, ampirik literatürde gözlem aşamasında olan bir hipotez olduğundan henüz çevresel bozulmanın azalmaya başladığı gelir düzeyine ilişkin görüş birliği sağlanamamıştır. Uygulamalı literatür ÇKE hipotezi farklı ekonomilere ve dönemlere farklı yöntemler altında test eden çalışmalar yönünden oldukça zengindir. Ancak hemen hemen tüm çalışmalarda uzun dönem yerine kısa dönem gelir veya ekonomik büyüme rakamları kullanılmıştır. Oysa hipoteze göre çevre kirliliği ile ilişkilendirilen gelir uzun dönem gelirdir. Ekonometrik analizlerde kısa dönem gelir rakamlarının kullanılması hipotezin geçerliliğini veya geçersizliğini doğrudan etkileyeceği açıktır. Bu çalışmada amaç yukarıda bahsedilen eksikliği dikkate alarak ÇKE hipotezinin Türkiye’nin 1960-2013 dönemi için geçerli olup olmadığını, eğer geçerli ise eğrinin neresinde bulunulduğunu tespit etmek ve böylece geleceğe yönelik çıkarımlarda bulunmaktır. Çalışmada çevre kirliliği ölçütü olarak CO 2 emisyon hacmi, gelir olarak kişi başına düşen uzun dönem reel GSYİH kullanılmıştır. Uzun dönem gelir serisi Frekans Filtresi olarak da bilinen Band-Pass filtreleme yöntemiyle elde edilmiştir. Ardından ÇKE hipotezi ARDL eş-bütünleşme testi yardımıyla analiz edilmiştir. Analiz sonuçlarına göre; Türkiye örneğinde uzun dönem gelir ile CO 2 emisyonu arasında ikinci dereceden bir ilişki istatistiksel olarak uzun dönemlidir. Tahmin edilen uzun dönemli ikinci dereceden fonksiyondaki değişken katsayılarının işaretleri ÇKE hipotezini destekler biçimde çıkmıştır. Uzun dönem fonksiyona göre kirlilik hacmini maksimum kılan kişi başına düşen reel gelir 9.500 ABD doları civarındadır. Anahtar kelimeler: ARDL Sınır Testi Yaklaşımı, Band-Pass Filtresi, Çevresel Kuznets Eğrisi, Türkiye Ekonomisi.
725
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Environmental Kuznets Curve in Turkey: ARDL Bound Test Approach Şadiye OKUTAN1,*, Prof. Dr. Rahmi YAMAK 2, 1
Karadeniz Technical University, Trabzon, Turkey Karadeniz Technical University, Trabzon, Turkey *Responsible author e-mail:
[email protected],
[email protected] 2
Abstract Kuznets hypothesis which argues that there is an inverted U-shaped relationship between income level and income inequality was developed in 1955. Thirty-five years later, the question of whether there is a relationship between economic growth and pollution indicators has begun to be questioned with the increase of environmental pollution. At the beginning of 1990s, theoretical bases of the Environmental Kuznets Curve (EKC) were formed in the studies of Grossman and Krueger (1991) and Panayotou (1993). EKC hypothesis argue that an inverted U-shaped relationship between per capita income and different pollutants which causes environmental pollutions. According to EKC hypothesis, in the early stages of economic growth, the pollution indicators rise faster than the income. Environmental pollution volume has been maximum when income reaches a certain level. After the maximum level of pollution volume, pollution volume has been decreased as income increases. Since the EKC is a hypothesis that is in the observation stage in the empirical literature, there has not yet been a consensus on the level of income at which environmental degradation is beginning to decline. Empirical literature is very rich in terms of the studies which have tested the EKC hypothesis for different countries and periods under different approaches. However, short-run income or economic growth instead of long-run income was employed in almost all studies. But, according to the hypothesis, income which has been related to environmental pollution is long-run income. In econometric analysis, it is certain that using the short-run income affects directly the validity of the hypothesis. In this study, the purpose is to determine whether EKC hypothesis is valid for the period of 1960-2013 of Turkish economy and if so, to evaluate current situation in the curve and to make some inferences for future, by considering the above deficiency. In this study, CO 2 emission and long-run real GDP per capita were used as a measure of environmental pollution and income, respectively. Long-run real GDP per capita series have been produced by using Band-Pass Filtering, also known as Frequency Filter. Then, EKC hypothesis was investigated under the ARDL co-integration approach.
726
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
According to results of the analysis, a second degree relationship between longrun real GDP and CO 2 emission is statistically significant in the long-run. The estimated coefficients in the second degree function were found to support the EKC hypothesis. According to the long-run function, reel GDP per capita which maximizes to environmental pollution is about 9500 ABD dollar. Key words: ARDL Bound Testing Approach; Environmental Kuznets Curve, Band Pass Filter; Turkey Economy.
727
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Otoparklarda Kullanılan Yeni Teknolojilerin Türkiye’de Uygulanabilirliğinin Araştırılması Şafak Bilgiç1,*, Cebrail Çiçek1 Eskişehir Osmangazi Üniversitesi İnşaat Mühendisliği Bölümü, Meşelik, Eskişehir *Sorumlu yazar e-posta:
[email protected]
1
Özet Ekonominin gelişmesi, nüfusun artması, yaşam standartlarının karmaşık hale gelmesi ve ihtiyaçların karşılanması gerekliliği her ailede araç sahipliği isteğinin oluşmasına neden olmaktadır. Bu istek taşıt sayısının artmasına neden olmakta ve kent merkezlerindeki trafiği durma noktasına getirerek yaşamı olumsuz yönde etkilemektedir. Alt yapı yetersizliği ve arazilerin verimsiz kullanılması sonucu ortaya çıkan otopark problemi trafikteki tıkanıklığın sebebi olarak karşımıza çıkmaktadır. Otopark problemi, günümüze kadar çeşitli yöntemlerle çözüme kavuşturulmaya çalışılsa da taşıt sayısının sürekli artması ve toplu taşımayı teşvik edecek stratejilerin geliştirilememesi, çözümü tam olarak sağlanmış bir problem olmasını imkânsız hale getirmektedir. Sürücülerin gitmek istedikleri yerlerde otopark ihtiyaçlarını karşılamaları ve trafikteki sirkülasyonu olumsuz etkilememeleri için yerel yönetimler tarafından yönlendirme desteği verilerek ve kapasite arttırmayı amaçlayan teknolojiler kullanılarak kent yaşamının sürdürülebilirliği sağlanabilmektedir. Teknolojinin gelişmesi otopark problemini çözüme kavuşturma konusunda farklı fikirlerin ortaya çıkmasını zorunlu hale getirmiş ve otopark konusunda yeni bir sektörün oluşarak piyasada önemli çalışmaların yapılmasını sağlamıştır. Bu çalışmada, otopark türlerinin, otopark probleminin, trafik tıkanıklığının ne olduğu konusunda bilgi verilerek otopark probleminin çözümüne yönelik stratejiler, otopark tesislerinde kullanılan teknolojik imkânlar, otopark yönetmeliği ve otopark tesis maliyetine etki eden faktörler üzerinde durulmuştur. Bursa Mudanya Feribot iskelesi otoparkı uygulama alanı olarak ele alınmış ve 2500 m2 alana açık otopark, lift tipi otopark, dönme dolap tipi otopark, puzzle tipi otopark ve çok katlı otopark yapılması durumunda yatırım maliyetleri ve işletme maliyetleri karşılaştırılmış ve ekonomik analizleri yapılmıştır. Anahtar kelimeler: Otopark problemi, otopark türleri, otopark yönetimi, otopark uygulama maliyeti, trafik tıkanıklığı, Mudanya feribot iskelesi.
728
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Investigation of Applicability of New Technologies Used in the Parking Lots in Turkey Şafak Bilgiç1,*, Cebrail Çiçek1 1
Department of Civil Engineering, Faculty of Engineering and Architecture, Eskisehir Osmangazi University, Eskişehir, Turkey *Responsible author e-mail:
[email protected]
Abstract Development in economy, increase in population, complexity of life standards and requirement to meet the needs caused a desire for car ownership in every family. This desire causes an increase in the number of vehicles travel on roads and it makes driving in city centers very difficult and so affects the life in cities negatively. Insufficiency in infrastructure and inability to use the lands effectively are the reasons of traffic jam. Although the parking facility problem is tried to be addressed in various methods and ways, increase in the number of vehicles and inability to create strategies to incentivize public transportation made it impossible to solve this problem completely. There are some technological possibilities provided by local authorities to give direction support and to increase capacity so that the drivers will not have parking problem in cities they drive to and will not affect the traffic circulation negatively. Technological developments helped different ideas to occur that aim to solve the parking problem. Also they caused the creation of a new sector, which contributed to the solution of this problem with conducting important studies. This study aims to gather information on parking facility types, parking problem and traffic jam together. It will examine the strategies that can be used to solve this problem, technological possibilities that are used in parking lot facilities, parking regulations, and factors that have effects on the cost of parking lot facility. Bursa Mudanya Ferryboat Dock’s parking facility case is elaborated in the thesis. The investment and the operation costs of different types of parking projects are compared and their profitability is evaluated assuming daily price plan: 2500 m2 traditional open air parking, lift-type parking, ferris wheel-type parking, puzzle-type parking and multilevel parking facilities. These 5 types of parking can be made because of benefit cost ratio of all types found greater than 1. As a result, Net Present Value for multi-level parking which has maximum capasity was obtained higher than the other types of parking and this type of car parks has been determined the most profitable type. Key words: Parking facility problem, parking facility types, parking facility management, parking facility operation cost, traffic jam, Mudanya ferryboat landing.
729
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Hastane Projelerinin Otopark Planlamasında Dikkate Alınacak Hususların İncelenmesi Şafak Bilgiç1,*, İhsan Karaağaç1 Eskişehir Osmangazi Üniversitesi İnşaat Mühendisliği Bölümü, Meşelik, Eskişehir * Sorumlu yazar e-mail:
[email protected]
1
Özet Sağlık tesisleri ve hastaneler hiçbir zaman önemini kaybetmeyen kuruluşlar olmuştur. Toplumun ekonomik ve sosyal gelişmesi, nüfus artışları ve tıp bilimindeki ilerlemeler sonucunda hastaneler karmaşık ve büyük yapılar haline gelmiştir. Bununla birlikte hastaneler bulundukları bölgeler ve tüm şehir açısından planlama gerektiren organizasyonlara dönüşmüştür. Sonuç olarak bu denli büyük tesislerin toplumun ulaşımı açısından sorunlara yol açtığı görülmüştür. Ulaşım konusunun başlangıç ve bitiş aşamasında yer alan otopark kavramı da planlama aşamasına dahil edilmesi gereken konulardan biri olmaktadır. Özellikle hastaneler gibi toplumun yoğun olarak seyahat ettikleri kurumlarda uygun biçimde planlanma yapılmadığı durumlarda otoparklar bölge ulaşımı konusunda büyük sorunlara yol açmaktadır. Bu sorunların çözümü için hastane otoparklarının sadece yönetmelikler kapsamında değil, tesis bazında otopark çalışmaları yapılması gerekli olmaktadır. Ayrıca sürdürülebilirlik açısından otopark kavramının tek başına değil bütün trafik elemanları ile birlikte değerlendirilmesi yerinde olacaktır. Günümüzde bu alandaki çalışmalar otopark planlamasının daha detaylı ve verimli olmasını sağlamıştır. Bu çalışma kapsamında sağlık tanımından başlayarak günümüzde hastane kavramının ne durumda olduğu, hastanelerin kent açısından önemi ve ilişkisi, hastanelerin ulaşım ve toplu taşıma sistemleri ile durumu araştırılmıştır. Otoparkların, ulaşım ve hastane yapısı arasındaki ilişkileri irdelenmiştir. Ülkemizde yönetmelikler ve tasarım rehberlerindeki hastane otoparkları konusunda verilen bilgilere değinilmiştir. Ayrıca yurtdışında hastanelerin ve otoparkların planlamasında daha çok kapasite ve ulaşım açısından incelemelere yer verilmiştir. Araştırma kapsamında Eskişehir Yunus Emre Devlet Hastanesi’nin yeni yapılan binasının konumu ve otopark planları üzerinden otoparklar ve ulaşım yolları incelenmiştir. Otopark planlarının yönetmelikler açısından durumuna bakılmıştır. Yapılan hesaplamalarla ve simülasyon analizlerinde hastane otoparkının ulaşım üzerine etkileri incelenmiş ve sürdürülebilir bir ulaşım sistemi için gerekenler ortaya konulmuştur. Olumlu ve olumsuz durumlar üzerinde senaryolar ile trafik üzerindeki etkilere dair sonuçlara ulaşılmıştır. Anahtar kelimeler: Otopark problemi, otopark türleri, otopark yönetimi, trafik tıkanıklığı, hastane otoparkları, hastane otopark planlaması.
730
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Examination of Issues to be Considered in the Parking Lot Planning of Hospital Projects Şafak Bilgiç1,*, İhsan Karaağaç1 1Department of Civil Engineering, Faculty of Engineering and Architecture, Eskisehir Osmangazi University, Eskişehir, Turkey *Responsible author e-mail:
[email protected]
Abstract Healthcare facilities and hospitals have never been without significance. As a result of the economic and social development of society, population increases and advances in medical science, hospitals have become complex and large structures. However, hospitals have become organizations that require planning in terms of regions and the whole city. As a result, it has been seen that such large installations have caused problems in terms of community access. The concept of parking at the beginning and the end of transportation is also one of the topics to be included in the planning stage. Especially in hospitals where there is not proper planning in the institutions where the society is intensely traveled, parking lots lead to major problems in regional transportation. For the solution of these problems, parking lots of the hospital are required not only to be covered by the regulations, but also to perform parking works on the basis of the facilities. In addition, it will be appropriate to evaluate the concept of parking together with all traffic elements, not alone. Today, studies in this area have made parking planning more detailed and efficient. Within the scope of this study, starting from the definition of health, the present situation of the hospital concept, the importance and relation of the hospitals with respect to the city, transportation and public transportation systems of the hospitals and the situation have been investigated. The relationship between parking lots, transportation and hospital structure has been examined. In our country, regulations and guidelines on hospital car parks in design guidelines are mentioned. In addition, the planning of hospitals and car parks abroad has been examined more in terms of capacity and transportation. Within the scope of the research, the location of the newly constructed building of Eskisehir Yunus Emre State Hospital and parking lots and parking ways of the parking lots were examined. The parking plans are looked at in terms of regulations. The effects of the hospital car park on transportation were investigated in the calculations and simulation analyzes. Scenarios on positive and negative situations and results on the effects on traffic have been reached. Key words: Parking problem, parking types, parking management, traffic jam, hospital parking lots, hospital parking lot planning.
731
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Ülkemizde Sürdürülebilir Turizmde Kültür Felsefesinin Rolü Şahin FİLİZ1,* Akdeniz Üniversitesi, Edebiyat fakültesi, Felsefe Bölümü, Antalya/Türkiye * Sorumlu yazar e-posta:
[email protected]
1
Özet Ülkemiz toprakları, binlerce yıldır büyük medeniyetlere ev sahipliği yapmıştır. İnsanlığın özeti diyebileceğimiz yoğunlukta bütün din ve kültürlerin kalıntıları varlığını sürdürmektedir. Bu nedenle bu gün dünyanın birçok ülkelerine yayılmış dinler ve kültürlere mensup insanlar için Anadolu, bu tarihsel ve kültürel zenginliği ile dikkatleri üzerine çekmektedir. Kısa ya da uzun vadeli ziyaret için ülkemize gelen yabancı turistler, doğal varlıklarımızın eşsiz güzelliği yanında, tarihsel olarak geçmişlerine dair kültürel izlerin bulunduğu coğrafyamızın özellikle bu zenginliklerini yerinde görmek ve daha ayrıntılı bilgi sahibi olmak amacını taşımakta, bu taleplerini sık sık dile getirdikleri gözlenmektedir.. Özellikle bu örtülü taleplerinin gereği gibi karşılanabilmesi, kültür tarihi ve felsefesi alanında yetişmiş insan kaynaklarına olan ihtiyacı gündeme getirmektedir. Çalışmanın amacı, kültür felsefesinin, sürdürülebilir bir turizm için ön plana çıkarılmasının önemine işaret etmektir. Çalışma, felsefe bölümlerinde lisans ve lisansüstü düzeyde okutulan kültür felsefesi derslerinin başta Antalya olmak üzere farklı medeniyetlere ev sahipliği yapmış illerimizde turizm ekonomisine nasıl ve hangi yollarla öncülük edeceği konusunu içermektedir. Kapsam, kültür felsefesinin yurt sathında turistik bölgelerimizin her birinin doğasına uygun verimli bir pratiğe dönüştürmenin imkanlarını araştırmaktan ibarettir. Kültür felsefesi kuramdan eyleme taşındığı takdirde, turizmde süreklilik ve ekonomik verimlilik sağlanacaktır. Deniz, kum ve güneş turizmde geçici ve mevsimlik bir hareketliliği sağlamakla sınırlı olurken, kültür bilimleri ve kültür felsefesi, var olan farklı medeniyetleri ve bunlara kendini nispet eden farklı turist kitlelerini, daha kalıcı tarihsel mirasla yakınlaştıracak; yıldan yıla inişli-çıkışlı eğilimler gösteren turizm sektörüne sürekli canlılık katacaktır. Ülkemiz turizmi bundan iki verimli sonuç elde edecektir: İlki, Türk kültürü ve diğer kültürler arasında bilimsel temellere dayalı bir iletişim kurulmuş olacak; kültürler arası yakınlaşma sağlanacak, bu alanda akademik ya da mektepli kültür elçileri yetişmiş olacaktır. İkincisi, ülkemizin turistlere cazip gelen doğal güzelliğini bile yeterince tanıtabilecek turizm elçisi sıkıntısı yaşanırken, kültür elçileri bu alandaki boşluğu da doldurmuş olacaklardır. Anahtar kelimeler: Kültür felsefesi, Turizm, Medeniyet, Tarih, Kültür elçisi.
732
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Role of Culture Philosophy in Sustainable Tourism in Our Country Şahin FİLİZ1,* 1
Akdeniz University, Faculty of Literature, Department of Philosophy, Antalya/Turkey * Responsible author e-mail:
[email protected]
Abstract Our country has been home to the great civilizations for thousands of years. At the density we can call the summation of mankind, the remains of all religions and cultures continue to exist. For this reason, for people belonging to religions and cultures spread to many countries of the world today, Anadolu attracts attention with its historical and cultural richness. Foreign tourists who come to our country for short or long term visits aim to have more detailed information and to see the richness of our geographical region, which has historical traces of cultural heritage in particular, and, as well as the unique beauty of our natural assets. It is observed that they often express these requests. Especially the fact that these covered demands can be met brings the need for human resources grown in the field of history of culture and philosophy of culture. The aim of the work is to point out the importance of featuring the philosophy of culture for a sustainable tourism. The study covers how the philosophy of culture courses taught at the undergraduate and graduate levels in philosophy departments will lead the tourism economy in our cities, especially those hosting different civilisations such as Antalya. The scope is simply to explore the possibilities of transforming philosophy of culture into a fertile practice appropriate for the nature of each of our touristic regions in the country. If the philosophy of culture is moved from the theoretic to the practical approach, continuity and economic efficiency in tourism will be ensured. While the sea, sand and sun are limited in providing temporary and seasonal mobility in tourism,the sciences of culture and the philosophy of culture are going to bring the different civilizations and the different masses of tourists who rely on them closer to a more permanent historical heritage. And the tourism sector will be constantly revitalizing, rather than showing trends in ups and downs. Tourism in our country will get two fruitful results from this: First, a communication based on scientific bases will be established between Turkish culture and other cultures; cultural rapprochement will be ensured, and cultural and ambassadors will be raised on this field. Secondly, while there is a lack of tourist ambassador that will allow our country to be sufficiently introduced in terms of natural beauty and attractions, cultural ambassadors will also fill this gap. Key words: The Culture Philosophy, Tourism, Civilization, History, Culture ambassador.
733
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sakin Şehir Yalvaç Örneğinde Sürdürülebilirlik, Sakin Şehirler Ve Toplumsal Katılım Şule Yüksel ÖZMEN1,*, Haluk Birsen2, Özgül Birsen3 Karadeniz Teknik Üniversitesi, Trabzon, Türkiye 2 Anadolu Üniversitesi, Eskişehir, Türkiye 3 Anadolu Üniversitesi, Eskişehir, Türkiye
1
*Sorumlu yazar e-posta:
[email protected]
Özet Türkiye’de sakin şehir olarak kavramsallaştırılan cittaslow hareketi sürdürülebilir yerel kalkınma hareketi olarak tanımlanmaktadır. Bu hareket çevreyle dost, kültür değerleri koruyarak, teknolojiyle ve sadece yerel unsurları kullanarak kalkınmayı içermektedir. İtalya kökenli olan bu hareket, küresel yemek zincirlerinin lokal lezzetleri yok etmesine tepki olarak doğan Slowfood hareketinin devamı niteliğindedir. Bugün dünyada 30 ülkeden 220 şehrin dâhil olduğu bir organizasyon olan cittaslow hareketi sürdürülebilirlik temeline odaklanmıştır. Bu çalışmada Türkiye’deki 14 sakin şehirden biri olan Yalvaç’ta sakin şehir algısına ve sakin şehre ilişkin çevresel, kültürel ve ekonomik kalkınma boyutunu içeren anket çalışması yapılmıştır. Anket 2016 yılı içinde 251 kişi ile yüzyüze görüşülerek yapılmıştır. Anketler sonucunda Yalvaçlıların sakin şehir olmalarının çevrenin ve kültürel değerlerinin korunması noktasında şehirlerine katkı sağladığı fakat ekonomik ve kalkınma anlamında katkı getirmediğini görüşünde oldukları ortaya çıkmıştır. Bu çalışma, 113K624 numarası ile TÜBİTAK tarafından desteklenen “İletişim Çağında Frene Basmak: Yavaş Şehirlerin Çevre İletişimi Bağlamında Analizi, Çevresel Toplumsal Katılım, İşbirliği Ve Uzlaşma Stratejilerinin Yavaş Şehirlerde Nasıl Sağlandığının Belirlenmesine Yönelik Bir Araştırma” projesi çerçevesinde gerçekleşmiştir. Anahtar kelimeler: Cittaslow, Sakin şehir, yavaş şehir, sürdürülebilirlik, toplumsal katılım, Yalvaç.
734
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sustainability, Cittaslow and social Participation in case of Cittaslow Yalvaç Şule Yüksel Özmen1,*, Haluk Birsen 2, Özgül Birsen 2 Karadeniz TeknikÜniversitesi, Trabzon, Türkiye 2 Anadolu Üniversitesi, Eskişehir, Türkiye 3 Anadolu Üniversitesi, Eskişehir, Türkiye
1
*Responsible author e-mail:
[email protected]
Abstract The Cittaslow movement, conceptualized as a calm city in Turkey, is defined as a sustainable local development movement. This movement is about friendly development, protecting cultural values, developing with technology and using only local elements. This movement, which originated in Italy, is the continuation of the Slow food movement, which has emerged as a reaction to global food chains destroying local delicacies. The Cittaslow movement, an organization that includes 220 cities from 30 countries in the world today, is focused on sustainability. In this study, a survey was carried out in Yalvac, one of the 14 Cittaslow cities in Turkey that included the environmental, cultural and economic development dimension of the Cittaslow and the Cittaslow. The survey was conducted with a total of 251 people in 2016. As a result of the surveys, it has been revealed that being a Cittaslow contributes to Yalvaç in the protection of the environment and cultural values but does not contribute to economic and development. This study was carried out within the framework of the project "Research on Determining the Slow Cities' Analysis in the Context of Environmental Communication, Environmental Community Participation, Cooperation and Reconciliation Strategies in Slow Cities" supported by TUBITAK with the number 113K624. Key words: CittaSlow, Sustainability, Social Participation, Yalvac.
735
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Multi-Criteria Decision-Making For Selection Of Environmentally Friendly Supplier Sukran SEKER1,* Department of Industrial Engineering, Yıldız Technical University, Turkey *Responsible author e-mail:
[email protected]
1
Abstract Supplier evaluation is the main step of selecting appropriate suppliers, which is very important to the performance of supply chain operations. The traditional evaluation criteria of supplier selection were consisted generally from cost, quality, and service perspectives. Many economic and environmental criteria must be considered in the decision process for selecting the most suitable suppliers. With the increasing environmental awareness, choosing environment friendly suppliers have begun to come into prominence in supplier evaluation and selection. To deal with the negative impacts of the industrial processes, supplier selection must be seen as a crucial part of the green supply chain management due to its long term acts. In this research, an operational model including integration of general and environmental criteria is introduced for environmentally friendly supplier selection criteria. Multi-Criteria Decision Making (MCDM) has been one of the fastest growing problem areas in many disciplines. The central problem is how to evaluate a set of alternatives in terms of a number of criteria. This paper proposes a Multi Criteria Decision Method (MCDM) to address the realworld problem of environmentally friendly supplier selection, based on prospect theory. Key words: Environmentally friendly supplier, Decision making, MCDM.
736
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Multi Criteria Decision Making For Selection Of Renewable Energy Sources Sukran SEKER1,* Department of Industrial Engineering, Yıldız Technical University, Turkey *Responsible author e-mail:
[email protected]
1
Abstract Renewable energies are well-known as one of the most important energy resources. A rising awareness of renewable energy sources is growing rapidly in many developed and developing countries. However, Multiple factors that affect the success of a Renewable Energy (RE) project and these factors must be analyzed and taken into account. From this perspective, multi-criteria analysis seems to be a suitable tool to merge and analyze all point of views concerned with the decision making process, by evaluating a relationship between all alternatives and factors that influence the decision. Thus, Multi Criteria Decision Methods (MCDM) are widely used in problems within the (RE) industry. MCDM can be an alternative to support decision and decision makers in their decision process. Therefore, an extensively used multi criteria decision making tool Fuzzy Analytic Hierarchy Process (FAHP) can be utilized as an approach for RE project selection problem. This study proposes FAHP to demonstrate the most fit RE project among several renewable energy alternatives in manufacturing industry. The results of this paper display the capability and effectiveness of the proposed model in selecting the most appropriate renewable energy option among the existing alternatives. Key words: Decision making, Renewable Energy, MCDM.
737
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Mobilya Endüstrisinde Tamir Bakımın Önemi ve Bir Uygulama Mehmet ÇOLAK1,*, Tahsin ÇETİN2 Muğla Sıtkı Koçman Üniversitesi, Teknoloji Fakültesi, Ağaçişleri Endüstri Mühendisliği Bölümü, 48000, Muğla, Türkiye *Sorumlu yazar e-posta:
[email protected]
1
Özet Rekabetin giderek arttığı günümüzde, işletmelerin sahip oldukları varlıkları verimli kullanabilmeleri çok önemlidir. İşletmelerin daha verimli çalışabilmesi için, makine, takım, alet ve tezgahların her zaman çalışmaya hazır durumda olması, kısaca arızasız durumda olması gerekmektedir. Ayrıca piyasa rekabeti, makine ve tesislerin daha verimli kullanılması için işletmeleri zorlamaktadır. Bu açıdan üretim sisteminin tümü ile aksamadan çalışmasını sürdürmek için bakım belli bir plan doğrultusunda yürütmek, beklenmedik arızaları minimumda tutmak gereklidir. Bu araştırmada veri toplama aracı olarak “anket tekniği” uygulanmıştır. Türkiye de mobilya üretimi yapan işletmelerin sektörel durumu hakkında edinilecek bilginin önemini üst düzeyde tutmak ve nesnelliğini koyabilmek için anketin uygulanmasında bir ilde sınırlı kalınmamıştır. Anketin uygulanması ve veri toplama işleminde, 58 ilde 628 işletmede uygulanmıştır. Yapılan anket çalışmasında, 628 işletmenin 93’ü büyük işletmede yapılmış bu da büyük işletmelerin %93’ünü kapsamaktadır. Ankette öncelikle büyük işletmelerde uygulanmasına karar verilmiş, diğer işletmelere tesadüfî örnekleme yöntemiyle ulaşılmıştır. Anketler her işletmeye bir adet uygulanmak şartı ile işletmede yetkili kişilerce doldurulmuştur. İşletmelerin, %30’u makine başındaki işçi sayesinde, %20’si kurmuş oldukları tamir bakım birimince, %50’si dışarıdan servis çağırarak tamir bakımı gerçekleştirmektedirler. Her ne kadar otomasyonun gelişmesi, işletmelere insansız üretim olanakları sunsa da ekipman bakımı için insan becerisine ihtiyaç duyulmaktadır. Fakat unutulmaması gereken, insan becerileri, tek başına yeterli olmayışı, bakım faaliyetleri için etkin bir organizasyonu sağlanması gerekmektedir. Anahtar kelimeler: KOBİ, Mobilya Endüstrisi, Otomasyon, Tamir-Bakım, Verimlilik.
738
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Importance of Repair Maintenance in Furniture Industry and an Application Mehmet ÇOLAK1,*, Tahsin ÇETİN 1 1
Muğla Sıtkı Koçman University, Technology Faculty, Wood Working Industrial Engineering, Muğla, Turkey *Responsible author e-mail:
[email protected]
Abstract In recent days on which rivalry is gradually increasing, using own assets efficently by the enterprises is very important. For organizations to function efficiently, the machine, tools and devices should always be ready to use; that is, they should not have any malfunctions. Moreover, the increasing competition forces the organizations to use their facilities and machine more efficiently. As such, organizations need to keep their production systems continuously functioning and this requires repair and maintenance activities to be conducted in a planned way and to keep the unexpected breakdowns at minimum. In this way, reliability of the organization will increase. In this study, as a data collection tool, “questionnaire technique” was used. The administration of the questionnaire was not limited to one city to have a high level of objectivity and to get more generalizable results. The questionnaire was administered to 620 organizations in 50 cities. 93 of the 620 organizations are large-scale organizations and this means a representation ratio of 93% for the large-scale organizations. While the sampling of the study was determined, first large-scale organizations were included and the rest of the sampling was randomly assigned. One questionnaire was administered to each organization and filled in by managers or supervisors. In 30% of the organizations, these activities are carried out by the workers working at the machine, in 20% through the repair and maintenance team, and 50% call services outside the organizations. Though partially automation decreases the need for human labor, human factor in indispensable part of maintenance activities. But, it should be remembered that human skills are not enough on their own, also there should be an effective organization. Key words: SME, Furniture Industry, Automation, Repair-Maintenance, Productivity.
739
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Türkiye’de Doğal Taş Sanayinin Coğrafi ve Ekonomik Sürdürülebilirliği Tamer EFE1,*, Songül SALLAN GÜL2, Onur UZER2 Burdur İl Özel İdaresi, Burdur, Türkiye Süleyman Demirel Üniversitesi, Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2
Özet Türkiye doğal taş potansiyeli bakımından dünya rezervinin yaklaşık %40’ına sahip olmakla birlikte özellikle son yirmi yılda her türlü doğal taş ticari anlamda mermer sınıfına girmiştir. Aslında Türkiye’nin de yer aldığı bu coğrafyada doğal taş kullanımı Hititler dönemine kadar dayanmaktadır. Selçuklu ve Osmanlı İmparatorlukları döneminde inşa edilen mimari yapılarda Marmara Adası, İzmit, Bilecik ve Ege Bölgesinde yer alan mermer ocaklarının kullanıldığı bilinmektedir. Türkiye’de ise doğal taş sektörü 1980 sonrasında gelişmeye başlamış ve 2000’li yıllarda artan bir ivmeyle büyümeye devam etmiştir. 2015 yılında yaklaşık 1.9 milyar dolarlık ihracat rakamına ulaşarak (tüm maden ihracatının %50’ si) çok önemli bir sanayi dalı haline gelmiştir. Türkiye’de üretilen doğal taşların büyük bir bölümü ham blok halinde yurtdışına, en çok Çin’e ihraç edilmektedir. Türkiye’ de 2500’ün üzerinde mermer ocağı bulunmakta ve tamamı özel sektör tarafından işletilmektedir. Sektörün hızla büyümesi ve maden mevzuatında son yıllarda yapılan değişiklikler büyük ölçekli firmaların da doğal taş madenciliğine yönelmeye başlamasına sebep olmuştur. Ayrıca sektörde kullanılan makine ve ekipmanlar da artık Türkiye’de üretilmeye başlanmıştır. Bu nedenlerle doğal taş sektörünün önümüzdeki yıllarda da büyümeye devam etmesi beklenmektedir. Ancak doğal taş sanayinin coğrafi ve ekonomik olarak sürdürülebilirliğinin sağlanması için tekniğine uygun olarak madencilik yapılması ve çevresel etkilerin de göz önüne alınması gereklidir. Çünkü tüm madenler doğası gereği bulunduğu yerde üretilmek zorundadır. Bu da beraberinde birçok problemi getirmektedir. İlk yatırım maliyetlerinin yüksek oluşu, ar-ge ya da rezerv tespit maliyetlerinin riski, izin ve ruhsatlandırma süreçleri ve iş kazaları gibi nedenler doğaltaş ve özelinde de mermer sektörünün sürdürülebilirliğinin önündeki engeller arasındadır. Yine mermerin lüks tüketim ürünü gurubuna girmesi, doğal taşta değişen moda akımları ve sektörün finansal krizlerden çok etkilenmesi de söz konusudur. Tüm bu etkenler doğal taş sektöründe sürdürülebilir büyümeyi ve gelişmeyi tehdit etmektedir. Madencilik sektöründeki aktörler yasal düzenlemelerin de etkisiyle çevresel etkiler ve önlemleri bakımından son yıllarda ciddi mesafeler kat etmiş ve bilinçlenme başlamıştır. Ancak uygulamada yaşanan sıkıntılar sebebiyle çevresel etkilere karşı önlemler halen yeterli değildir. Bu bildiride Türkiye’de maden sanayi ve özelinde de doğal taş ve mermer sektörünün gelişim dinamikleri coğrafi ve ekonomik bağlamda ele alınmakta, riskler ve potansiyeller değerlendirilmektedir. Anahtar kelimeler: Doğal taş sektörü, sürdürebilir madencilik, mermer sanayi, ekonomi, Türkiye.
740
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Geographic and Economical Sustainability of Natural StoneMarble Industry in Turkey Tamer EFE1,*, Songul SALLAN GUL2, Onur UZER2 1
Special Provincial Administration, Burdur, Turkey 2 Suleyman Demirel University, Isparta, Turkey *Responsible author e-mail:
[email protected]
Abstract In point of natural stone potential, Turkey have about %40 of world’s reserve, and over the last two decades all kinds of natural stones have been included to marble classification commercially. Actually in this geography, natural stone usage started with Hittites. It is known that marble quarries on Marmara Island, Izmit, Bilecik and Aegean region were used in architecture which built in Seljuk and Ottoman Empire terms. But in Turkey, natural stone sector began to develop after the 1980s and has been gone on acceleratingly in 2000s. In 2015, marble sector became very important branch of industry with 1.9 billion dollars export figüre (%50 of all mine export). The large part of natural stones produced in Turkey are exported abroad as rough block, mostly China. There are more than 2500 marble quarries in Turkey and almost all of them run by private sector. In recent years large-scale companies are started to enter the sector with modification of mining laws. Also machines and equipments used in marble quarries started to be produced in Turkey. For these reasons it is supposed that natural stone and specially marble sector will be continue to grow up in the next years. But geographic and economical sustainability of natural stone industry requires technical mining and environmental impacts have to be considered. Because mining operations have to be done in location where they are. But sector also causes a lot of problems. Reasons like high initial investment costs, research and development activities risks, permission and license process and occupational accidents are some obstacles in front of the sustainability of natural stone industry. Also marble is a luxury consumer goods, trends always change and it is higly effected by financial crisis. All these reasons threaten to the sustainable growth of the natural stone sector, especially marble. In recent years actors on mining sector cover a distance in environmental impacts and its precautions with legislative regulations and awakening has been started. But it is insufficient due to practice deficiencies. In this study, devolopment dinamics of natural stone-marble sector is discussed geographically and economically, risks and potentials are evaluated. Key words: Natural stone sector, sustainable mining, marble industry, economy, Turkey.
741
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Karayemişin (Prunus Laurocerasus L.) Farklı Ortamlarda Köklenmesi Üzerine Bir Araştırma Tuba BAK1,*, Turan KARADENİZ2, Hüseyin DELİGÖZ3, Mehtap ŞENYURT2 A.İ.B.Ü. Mudurnu Süreyya Astarcı Meslek Yüksekokulu, Bolu, Türkiye 2 A.İ.B.Ü. Ziraat ve Doğa Bilimleri Fakültesi, Bolu, Türkiye 3 Gıda Tarım ve Hayvancılık Bakanlığı Samsun Tohum Sertifikasyon Test Müdürlüğü, Samsun, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
Özet Bu çalışma 2008 yılında, Ordu Merkez-Karapınar Mahallesinde bitkisel ve fiziksel özellikleri bakımından üstün olduğu bilinen bir karayemiş genotipinin farklı ortamlarda köklenme performanslarını belirlemek amacıyla yürütülmüştür. Dinlenme döneminde hazırlanan odun çelikleri, üzerinde birer yaprak olacak şekilde, hızar tozu, dere kumu, toprak, torf ve dere kumu-hızar tozu-toprak karışımından oluşan 5 ortama dikilmişlerdir. Çeliklerde kök sayısı, köklenme oranı, canlı çelik oranı ve kök uzunluğu belirlenmiştir. Elde edilen veriler istatistiki analize tabi tutulmuştur. Kök sayısı en düşük 6.33 adet ile dere kumu-hızar tozu-toprak karışımındaki ortamda, en yüksek olarak 13.00 adet ile toprak ortamında tespit edilmiştir. Köklenme oranı en düşük %42.22 ile dere kumu-hızar tozu-toprak ortamından hazırlanan karışımında ve en yüksek ise %86.67 ile toprak ortamında görülmüştür. Canlı çelik oranı en düşük %35.55 ile torf ve dere kumu-hızar tozu-toprak karışımdan hazırlanan ortamda ve en fazla canlı çelik oranının ise %59.99 ile toprak ortamında olduğu belirlenmiştir. Kök uzunluğu ise en düşük 19.71 cm torf ortamında, en yüksek ise 28.84 cm ile dere kumu-hızar tozutoprak karışımından hazırlanan ortamında olduğu belirlenmiştir. Anahtar kelimeler:Karayemiş, Prunus Laurocerasus L.,Köklenme, Ortam.
742
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
A research on Rooting of Cherry Laurel (Prunus Laurocerasus L.) in Different Medias Tuba BAK1,*, Turan KARADENİZ2, Hüseyin DELİGÖZ3, Mehtap ŞENYURT2 1 A.İ.B.Ü. Mudurnu Süreyya AstarcıVocational School, Bolu, Türkiye A.İ.B.Ü.Faculty of Agriculture and Natural Sciences, Bolu, Türkiye 3 Gıda Tarım ve Hayvancılık Bakanlığı Samsun Tohum Kontrol Müdürlüğü, Samsun, Türkiye *Sorumlu yazar e-posta:
[email protected] 2
Abstract This study was carried out to determine rooting performances in different medias of cherry laurel genotype known as superior in terms of plant characteristics and physical characteristics in Ordu – Karapınar neighborhood in 2008. Hardwood cuttings which was prepared during dormant season was planted in 5 medias composed of sawdust, riversand, soil, turf and riversand- sawdust-soil combination with a leaf on it. Root number, rooting rate, viability rate and root length of cuttings were determined. Obtained data were subjected to statistical analysis. Root minimum number was determined in the media of riversand- sawdust-soil combination as % 6.33 and maximum rate was 13.00 in the soil media. The least rooting rate was seen in the media of riversand- sawdust-soil combination as 42.22% and the highest rate was 86.67% in the soil media. Viability slip minimum rate was determined in the media of turf and riversand-sawdust-soil combination as %35.55 and the maximum rate was %59.99 in the soil media. Minimum root length was determined in the media of turf as 19.71cm and the maximum root length was determined in the media of riversand- sawdust-soil combination as 28.84 cm. Key words: CherryLaurel, Prunus Laurocerasus L., Rooting, Media.
743
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Tarım İşletmelerinde Çevresel, Ekonomik ve Sosyal Sürdürülebilirliğin Ölçülmesi Uğur BAŞER1,*, Mehmet BOZOĞLU1, Bakiye KILIÇ TOPUZ1 Ondokuz Mayıs Üniversitesi, Ziraat Fakültesi, Tarım Ekonomisi Bölümü, Samsun, Turkey *Sorumlu yazar e-posta:
[email protected]
1
Özet Çevresel riskleri azaltarak daha fazla gıda üretme çabasından dolayı, tarım sektöründe sürdürülebilirliğinin önemi gittikçe artmaktadır. Bu nedenle, günümüzde verimli ve sürdürülebilir bir tarım sektörüne sahip olmak tüm ülkelerin temel politika hedefleri arasında yer almaktadır. Sürdürülebilir bir tarım sistemi oluşturmak için öncelikle sürdürülebilirliğin sağlıklı bir şekilde ölçümüne ihtiyaç vardır. Bu çalışmada, çiftlik düzeyinde çevresel, ekonomik ve sosyal sürdürülebilirliğin ölçüm yöntemleri ele alınmıştır. Çiftlik düzeyinde sürdürülebilirlik ölçüm yöntemlerinin değerlendirilmesinde literatür taraması kullanılmıştır. İncelenen literatürden sürdürülebilirlik göstergelerinin tipolojisinin genellikle çevresel, ekonomik ve sosyal sürdürülebilirlik olmak üzere üç boyuta ayrıldığı anlaşılmaktadır. Sürdürülebilirliğin çevresel boyutu sera gazı emisyonları, biyoçeşitlilik, su kalitesi, kaynak verimliliği, toprak koruma vb. gibi pek çok temayı kapsamaktadır. Buna karşın, ekonomik sürdürülebilirlik, kârlılık, verimlilik, esneklik gibi nispeten daha az sayıda göstergeyi içermektedir. Sosyal sürdürülebilirlik göstergeleri ise, kırsal alanlardaki yaşam kalitesi ile ilgili temaları kapsamaktadır. Sürdürülebilirliğin değerlendirilmesinde, mevcut göstergelerin seçimine dikkat edilmeli, sürdürülebilirlik değerlendirmeleri doğrulanabilmeli, güvenilir ve tekrarlanabilir olmalıdır. Ele alınan çalışma, çiftlik düzeyindeki sürdürülebilirlik çalışmalarının gerçekleştirilmesinde yol gösterici bir rehber niteliğindedir. Anahtar kelimeler: Çiftlik Düzeyi, Sürdürülebilirliğin Ölçülmesi, Sürdürülebilirlik Göstergeleri.
744
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Measuring Environmental, Economic and Social Sustainability at the Farm Level Uğur BAŞER1,*, Mehmet BOZOĞLU1, Bakiye KILIÇ TOPUZ1 1
Ondokuz Mayis University, Faculty of Agriculture, Department of Agricultural Economics, Samsun, Turkey *Responsible author e-mail:
[email protected]
Abstract Sustainability of agricultural sector is becoming increasingly more important as agriculture strives to produce more food while minimizing risk to the environment. Thus, the main policy target for all countries is to have an efficient and sustainable agricultural sector. Building a sustainable farming system is needed to measure sustainability. This paper discusses the measurement methods of environmental, economic and social sustainability at the farm level. A systematic literature review method was used to assess the measurement methods of farm level sustainability. The literature shows that the typology of sustainability indicators generally follows the three sustainability pillars such as environmental, economic and social. The environmental pillar covered very much themes such as greenhouse gas emissions, biodiversity, water quality, resource efficiency, soil conservation etc. By contrast, economic indicators contain a relatively small number of themes such as profitability, productivity, autonomy and resilience. Social sustainability indicators cover themes related with farm community such as the quality of life in rural areas. Careful attention should be given to the selection of these indicators and sustainability assessments should be validated, credible and reproducible. This review could provide a guide for conducting farm level sustainability studies. Key words: Farm level, Measuring sustainability, Sustainability indicators.
745
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Üniversite-Sanayi İşbirliğinin Öğrenci Bakış Açısıyla Değerlendirilmesi Ahmet DOĞAN1, İsmet SÖYLEMEZ2,*, Uğur ÖZCAN3, Recai ÖZCAN4, Alperen TOSUN3, Muhammet ERDOĞDU3, Yusuf SİVRİ3 1
Osmaniye Korkut Ata Üniversitesi, Osmaniye, Türkiye 2 Abdullah Gül Üniversitesi, Kayseri, Türkiye 3 Gazi Üniversitesi, Ankara, Türkiye 4 Selçuk Üniversitesi, Konya, Türkiye *Sorumlu yazar e-posta:
[email protected]
Özet Bu çalışmada üniversite sanayi işbirliğinin önemi, üniversite sanayi işbirliğinin yararları, nasıl geliştirileceği hakkında genel bir literatür taraması yaparak üniversite sanayi işbirliği hakkında gerekli bilgi toplanmıştır. Üniversite sanayi işbirliği artan rekabet ortamında öğrencilerin üniversitedeyken desteklenerek (hem üniversite hem de sanayi tarafından) ileriye yönelik kalifiye mühendislerin yetiştirilmesi açısından çok önemli bir etkendir. Üniversite sanayi işbirliğinin araştırmanın yapıldığı üniversitede ne kadar etkin olduğunu, öğrencilerin bu konuda neler düşündüğünü belirlemek amacıyla Endüstri Mühendisliği 3. ve 4. sınıf öğrencilerine hazırlanan anketler yaparak genel bir fikir elde edilmiştir. Bu anket toplam 173 öğrenciye uygulanmıştır. Ayrıca öğrenciler tarafından gelen çözüm önerilerine de yer verilerek Endüstri Mühendisliği Bölümü'nde üniversite sanayi işbirliğinin geliştirilmesi için yapılması gerekenler tespit edilmiştir. Anahtar kelimeler: Üniversite-sanayi işbirliği, anket, değerlendirme.
746
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Evaluation of Perspective of Students with University-Industry Collaboration Ahmet DOĞAN1, İsmet SÖYLEMEZ2,*, Uğur ÖZCAN3, Recai ÖZCAN4, Alperen TOSUN3, Muhammet ERDOĞDU3, Yusuf SİVRİ3 Osmaniye Korkut Ata Üniversitesi, Osmaniye, Türkiye 2 Abdullah Gül Üniversitesi, Kayseri, Türkiye 3 Gazi Üniversitesi, Ankara, Türkiye 4 Selçuk Üniversitesi, Konya, Türkiye *Responsible author e-mail:
[email protected] 1
Abstract In this study, we gathered the necessary information about university-industry collaboration by a general literature review, the benefits of university industry cooperation, and how to develop it. University-industry collaboration is a very important influence in terms of educating future qualified engineers by supporting the students in universities (both university and industry) in an increasingly competitive environment. A general idea was obtained by conducting questionnaires to the third and fourth grade students of Industrial Engineering in order to determine how effective the university-industry collaboration and what the expectations of students. A total of 173 students were filled out this questionnaire. In addition, the suggestions of the solutions coming from the students were also given and the necessary things to be done for the development of university industry collaboration in the Department of Industrial Engineering were determined. Key words: University-Industry cooperation, questionnaires, evaluation.
747
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Yeniden Yapılandırılabilir Üretim Sistemleri için Literatür Araştırması İsmet SÖYLEMEZ1,*, Uğur ÖZCAN2 Abdullah Gül Üniversitesi, Kayseri, Türkiye 2 Gazi Üniversitesi, Ankara, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
Özet Bu çalışmada yeniden yapılandırılabilir üretim sistemleri ile ilgili yapılmış olan literatürdeki çalışmalar sistematik bir şekilde sunulmaktadır. Gruplandırma yapılırken özel imalat hatları (ÖİS), esnek imalat sistemleri (EİS) ve yeniden yapılandırılabilir imalat sistemleri (YÜS) olarak “kapasite, fonksiyonellik ve maliyet” özellikleri dikkate alınmıştır. Scopus veri tabanı kullanılarak 2017 yılı Mart ayına kadar yayınlanmış olan yeniden yapılandırılabilir üretim sistemleri ile ilgili makaleler bulunmuştur. Bu arama gerçekleştirilirken anahtar kelime olarak “reconfigurable, manufacturing systems, flexible and dedicated manufacturing systems” kullanılmıştır. ÖİS de sistem ve makine yapısının sabittir. Ayrıca kapasitenin ayarlanamadığı, ürün çeşitliliğin az fakat üretim miktarının fazla olduğu düşük maliyetli bir sistemdir. EİS; sistem yapısının değiştirilebildiği makine yapısının sabit olduğu kapasitenin ayarlanabildiği genel bir esnek yapıya sahiptir. Yatırım maliyeti oldukça fazladır ve bu maliyet sistem tasarımının ilk aşamasında gerçekleştirilmelidir. Ürün çeşitliliğinin çok fazla olduğu durumlarda başvurulan bir üretim sistemidir. EİS ürün değişimlerine hızlı cevap vermek için tasarlansa da yapısal değişimler için yani talep değişimi ve ekipman hataları gibi beklenmedik durumlara cevap verebilme kabiliyeti düşük olduğu için YÜS’e ihtiyaç duyulmaktadır. YÜS ise sistem ve makine yapısının değişken olduğu özel bir esnek yapıya sahiptir yani değişen durumlara göre esnek bir sistem oluşturulur. Bu esneklik ürün aileleri için oluşturulabilmekte ve kapasite ayarlanabilmektedir. YÜS ile üretim hızlı ve verimli bir şekilde ayarlanabilmektedir. Anahtar kelimeler: Yeniden yapılandırılabilir imalat sistemleri, literatür araştırması, sınıflandırma.
748
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Reconfigurable Manufacturing Systems Literature Review İsmet SÖYLEMEZ1,*, Uğur ÖZCAN2 Abdullah Gül Üniversitesi, Kayseri, Türkiye 2 Gazi Üniversitesi, Ankara, Türkiye *Responsible author e-mail:
[email protected] 1
Abstract This paper provides detailed systematic literature review of reconfigurable manufacturing systems. Manufacturing systems are grouped considering feature of “capacity, functionality and cost” as dedicated, flexible and reconfigurable manufacturing systems. Scopus database are used for collection of the related papers until 2017 March. Keywords are “reconfigurable, manufacturing systems, flexible and dedicated manufacturing systems”. Dedicated manufacturing systems have system and machine structure. Also, capacity are fixed and product variety are less but production cost is very low because of the large quantity production. Although flexible manufacturing systems have a fixed machine structure, systems structure are changeable for capacity. Investment cost is very high and this cost is borne the cost at facility location stage. This system is used especially high product variety. Although flexible manufacturing systems are designed to respond quickly product changes, structural changes is needed for unexpected situations such as demand changes and equipment error. This changes will be done with reconfigurable manufacturing systems. Lastly, reconfigurable manufacturing systems are used flexible product family and capacity can be adjusted. Production will adjust fast and efficiently. Key words: Reconfigurable manufacturing systems, literature review, classification.
749
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürdürülebilirlik Açısından Yağmur Hendekleri Uğur ÜNAL1, Dilek Eren AKYÜZ,*2 İstanbul Üniversitesi, Fen Bilimleri Enstitüsü, İstanbul, Türkiye 2 İstanbul Üniversitesi, İnşaat Müh. Bölümü, İstanbul, Türkiye *Sorumlu yazar e-posta:
[email protected]
1
Özet Sürdürülebilirlik; hem ekonomik hem de yaşamsal olarak mevcut şartların korunabilmesini garanti altına alma açısından büyük öneme sahiptir. Yağmur hendekleri de sürdürülebilir tarım uygulamalarında (permakültür) ve en iyi yönetim uygulamalarında (low impact development best management practices LID BMPs) sıkça kullanılan ve sulama suyu ihtiyacını azaltarak mevcut şartlar altında ekolojik bir denge kurmaya yönelik etkili kanallar sistemidir. İlave olarak ekonomik, tasarımı kolay ve çevre dostu bir çözümdür. Islak ve kuru olmak üzere iki tipte inşa edilen bu hendekler; yerleşim bölgelerine, yol kenarlarına, orta refüje, alışveriş merkezleri ve okul çevrelerine, otoparklara, parklara, endüstri ve ticari alanlara uygulanabilmektedir. Yağmur hendeklerinin üst yüzeyi bitki örtüsü, malç, taş, talaş, kağıt, kullanılmış kumaş gibi malzemeler ile kaplanarak buharlaşmayı azaltmanın yanında suyun arıtılmasına da katkı sağlamaktadır. Bu çalışmada yağmur hendeklerinin kullanım yerleri ve yapıldıkları yerlere göre sürdürülebilirliğe olan katkısı irdelenmiştir. Yağmur hendeklerinin; yağışı tutarak yeraltısuyuna sızmayı artırması, taşkının pik debisini azaltması ve taşkın zamanını geciktirmesi, taşkının olası zararlarını hafifletmesi ve bioçeşitliliğe ev sahipliği yapması gibi önemli faydaları vardır. Ayrıca hendeğe ulaşan suyu hendek içinde bulunan bitki örtüsü gibi kaplama malzemeleri ile arıtarak suyun arıtılmış halde iletilmesini sağlar. Bu ise; özellikle şehir içinde bulunan yollardan veya otoparklardan gelen ağır metaller gibi önemli kirleticilerin oluştuğu bölgede arıtılmasını sağladığından çok önemlidir. Hendeğe ulaşan suların hızlarını azaltıcı etkisinden dolayı sediment tutunumu olacağından erozyonu önleyerek hendek içinde yeni toprak oluşumuna katkı sağlar. Bu ve bunun gibi birçok faydalarından dolayı sürdürülebilirlik açısından büyük öneme sahiptir bu yüzden pek çok gelişmiş ülkede yağmur hendeklerinin yapılması tavsiye edilmektedir. Ülkemizde de yağmur hendeklerinin yaygınlaştırılması ile ekolojik sürdürülebilirliğe, ekonomiye, çevreye, bioçeşitliliğe ve halk sağlığına olumlu katkılar sağlanacaktır. Anahtar kelimeler: Yağmur hendekleri, en iyi yönetim uygulamaları, sürdürülebilirlik, bioçeşitlilik.
750
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Swales in Terms of Sustainability Uğur ÜNAL1, Dilek Eren AKYÜZ,*2 İstanbul University, Institute of Science, İstanbul, Turkey İstanbul University, Civil Engineering Dept., İstanbul, Turkey *Responsible author e-mail:
[email protected] 1
2
Abstract Sustainability has great importance in terms of ensuring that both the economic and the life-related conditions can be preserved. Swales are an effective system of channels that are used frequently in sustainable agricultural practices (permaculture) and best management practices (LID BMPs) and to establish an ecological balance under current conditions, reducing irrigation water needs. In addition, it is economical, easy to design and environmentally friendly solution. The swale built in two types as wet and dry. It can be applied to residential areas, roadsides, central refuges, shopping centers and school environments, parking lots, parks, industrial and commercial areas. The surface of the swale is covered with materials such as vegetation, mulch, stone, sawdust, paper, used fabric, thus contributing to the purification of water as well as reducing evaporation. In this study, the contribution of swales to sustainability was examined according to the places of use and places where they are made. The swales have several advances such as increasing the infiltration of groundwater by detaining precipitation, reducing flood peaking and delaying flood time, mitigating the potential damage of floods and hosting biodiversity. In addition, the water reaching the swale is refined with covering materials such as vegetation within the swale to improve water quality. This property is very important for sustainability, especially in the areas where there are significant pollutants such as heavy metals from urban roads or parking lots. Owing to the effects on decreasing the speed of the waters reaching the swale, it will contribute to the formation of new soil in the swale by preventing erosion due to sediment adhesion. Because of this and many other benefits, swale has great prospects for sustainability, so it is recommended to build in many developed countries. The spreading of swale in our country will also contribute positively to ecological sustainability, economy, environment, biodiversity and public health. Key words: Swale, best management practices, sustainability, biodiversity.
751
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Kültürel Sürdürülebilirlik: Arkeolojik, Mekânsal ve Toplumsal Bilimlerde Disiplinlerarası Bir Yöntem İmkânının Sorgulanması Pervin ŞENOL1,*, Ümit AKCA2 Süleyman Demirel Üniversitesi, Isparta, Türkiye 2Süleyman Demirel Üniversitesi, Isparta, Türkiye * Sorumlu yazar e-posta:
[email protected] 1
Özet Toplumsal ve mekânsal araştırmaların genellemeci bir yaklaşımla, özellikle son dönemlere dek, hâkim paradigmaların sunduğu, çoğunlukla pozitivist perspektif ve yöntemlerden yola çıkılarak gerçekleştirilmiş olduğu görülür. Bilimsel çalışma çıktılardan yola çıkılarak yapılan genellemelerin bir gelenek, hatta bir zorunluluk olduğu genel kabul gören bir yaklaşımdır. Bununla birlikte bu perspektif, doğa ve toplum bilimlerinin özerkleşmesinin de etkisiyle, disiplinlerarası bütünsel bir değerlendirme imkânını ortadan kaldırmış olması yönünden eleştirel değerlendirmelere sahne olmuştur ve oluşturmaktadır. Toplumsal ve mekânsal değişimlerin açıklanmasında ilişkisel ve disiplinlerarası bir ele alışın imkânının sağlayacağı olanakların toplumsal gerçekliğin ve değişimin açıklanmasına katkı sağlayacağı düşünülmektedir. Bu kapsamda, 2017 yılı Temmuz ayında Isparta-Yalvaç özelinde başlanan, disiplinlerarası bir araştırma sürecinde gerçekleştirilen tartışmalardan yola çıkılarak toplumsal ve mekânsal değişim ve gerçeklikleri anlamada yöntem ve yaklaşımlar; arkeoloji, kent ve toplum bilimlerinin yöntem, teknik ve yaklaşımlarının kültürel sürdürülebilirlik açısından değerlendirilmesi amaçlanmaktadır. Anahtar kelimeler: Kent, toplum, mekan, ilişkisellik, yöntem, disiplinlinlerarasılık.
752
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Cultural Sustainability: Questioning The Possibility Of An İnterdisciplinary Method of Archeology, Urban And Social Sciences Pervin ŞENOL1,*, Ümit AKCA2 Süleyman Demirel Üniversitesi, Isparta, Türkiye Süleyman Demirel Üniversitesi, Isparta, Türkiye *Responsible author e-mail:
[email protected] 1 2
Abstract It is seen that social and spatial researches have been carried out by a generalist approach, especially from the perspective of positivist perspectives and methods, which the judiciary paradigms offered, especially until recently. Scientific work is a tradition, even a generally accepted approach, of generalizations made out of the way of output. Nevertheless, this perspective has been and is the scene of critical appraisal, with the effect of the autonomy of nature and social sciences, abolishing the disciplinary holistic assessment. It is thought that the possibilities of providing the possibility of a relational and interdisciplinary approach to the explanation of social and spatial changes will contribute to the explanation of social reality and change. In this context, methods and approaches in the sense of social and spatial changes and realities by starting from the discussions held in the interdisciplinary research process started in July of 2017 in Isparta-Yalvaç; It is aimed to evaluate the methods, techniques and approaches of archeology, urban and social sciences in terms of cultural sustainability. Key words: Rural, society, relationality, methods space, interdisciplinary.
753
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürdürülebilir Kentsel Gelişmenin Uygulama Aracı Olarak SymbioCity Yaklaşımı Ümmügülsüm TER1,*, Dilara CANSEVER2 Necmettin Erbakan Üniversitesi, Mühendislik – Mimarlık Fakültesi, Şehir ve Bölge Planlama Bölümü, Konya, Türkiye 2 Yüksek Lisans Öğrencisi, Necmettin Erbakan Üniversitesi, Şehir ve Bölge Planlama Anabilim Dalı, Konya, Türkiye * Sorumlu yazar e-posta:
[email protected]
1
Özet Günümüzde artan çevre sorunları ve bu sorunların yaşam kalitesini olumsuz etkilemesi, insan-doğa ilişkisini odağına alan çevre dostu kent formlarının geliştirilmesini zorunlu kılmaktadır. Sağlıklı, güvenli ve doğa ile bütünleşik yaşam alanlarının oluşturulması hedefine yönelik geliştirilen eko-kent, sürdürülebilir kent ve yeşil kent kavramlarına 2013 yılında SymbioCity kavramı da eklenmiştir. SymbioCity yaklaşımının hareket noktası şehirlerin insanlar için tasarlanmasıdır. Merkezine insanı alan SymbioCity yaklaşımı, doğal kaynakların korunması ve ekolojik ayak izinin düşürülmesi ile sorunlu kentsel alanları ekolojik ve yaşanabilir çevrelere dönüştürerek sağlık, konfor, güvenlik ve yaşam kalitesinin yükseltilmesine katkıda bulunmayı amaçlamaktadır. Sosyal ve ekonomik yapı ile de ilişkili olan SymbioCity yaklaşımı ile şehir ortamından etkilenen tüm paydaşlar arasında diyalog geliştirilerek sürdürülebilir kentsel gelişme için katılımcılık sağlanmaktadır. Bu çalışma ile, kentsel alanların ekolojik tasarımında doğa ve insan arasındaki ilişkiyi ön planda tutan, bütüncül ve sürdürülebilir kentsel gelişimi teşvik eden SymbioCity yaklaşımının hedeflerinin ve stratejilerinin değerlendirilmesi amaçlanmaktadır. Anahtar kelimeler: Eko-kent, Sürdürülebilir Gelişme, Yaşanabilirlik, SymbioCity Yaklaşımı.
754
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
SymbioCity Approach as an Implementation Tool for Sustainable Urban Development Ümmügülsüm TER1,*, Dilara CANSEVER 2 1
Necmettin Erbakan University, Faculty of Engineering and Architecture, Department of City and Regional Planning, Konya, Turkey 2 Msc student, Necmettin Erbakan University, Department of City and Regional Planning, Konya, Turkey *Responsible author e-mail:
[email protected]
Abstract Increasing environmental problems and the negative impact of these problems on the quality of life necessitates the development of environmentally friendly urban forms that take the human-nature relationship as a center. In 2013, SymbioCity approach has been added to the concepts of eco-city, sustainable city and green city which are developed in order to create healthy, safe and integrated livable spaces with nature. The starting point of this approach is "designing cities for people". The SymbioCity Approach to the centered on the human being aims to contribute to the improvement of health, comfort, safety and life quality by transforming the problematic urban areas ecologically and livable environments by preserving natural resources and reducing ecological footprints. The SymbioCity Approach, which is also related to the social and economic structure, promotes participation through dialogue between all stakeholders affected by the urban environment. This study aims to assess the objectives and strategies of the SymbioCity Approach, that promote holistic and sustainable urban development, based on the human-nature relationship in the ecological design of urban areas. Key words: Eco-city, Sustainable Development, Livability, SymbioCity Approach.
755
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Yerel Kimliğin Sürdürülebilirliğinde Yavaş Şehir (Cittaslow) Hareketinin Rolü Ümmügülsüm TER1,*, Mete ADIGÜZEL2 Necmettin Erbakan Üniversitesi, Mühendislik – Mimarlık Fakültesi, Şehir ve Bölge Planlama Bölümü, Konya, Türkiye 21 Necmettin Erbakan Üniversitesi, Mühendislik – Mimarlık Fakültesi, Şehir ve Bölge Planlama Bölümü, Konya, Türkiye * Sorumlu yazar e-posta:
[email protected] 1
Özet Kentleri birbirinden farklılaştıran özgün karakterlerinin ortaya koyduğu yerel kimliktir. Kültür ve yaşam biçiminin etkileşimi ile oluşan yerel kimliğin gelecek kuşaklara aktarılması, yerel özelliklerin korunması ve sürdürülebilir gelişmenin sağlanması ile mümkündür. Son yıllarda küreselleşmenin etkisi ile yerleşmeler yerel özelliklerini yitirerek birbirine benzemeye başlamış ve yerel kimliklerini yitirme tehlikesi ile karşı karşıya kalmıştır. Yerleşmelerin geleneksel karakterinin ve yerel özelliklerinin korunmasında ve sürdürülebilir gelişmenin sağlanmasında 1999 yılında İtalya’da ortaya konan Yavaş Şehir (CittaSlow) hareketi, önemli bir adım olmuştur. Yavaş Şehir hareketi, kentleşmenin baskısı ile şehirlerin dokularının, sakinliklerinin ve yaşam tarzının standartlaştırılmasını önlemek ve yerel özelliklerini korumak amacıyla Yavaş Yemek (Slow Food) hareketinden doğmuş bir şehirler birliğidir. Yavaş Şehir hareketi, özgün yerleşim dokusu, yaşam biçimi, yöresel mutfak, geleneksel el sanatları gibi yerleşmelerin yerel kimliğini oluşturan özelliklerin, ekolojik ve sürdürülebilirlik yaklaşımı ile korunması ve sürekliliğinin sağlanması esasına dayanan bir yaklaşımdır. Bu çalışma ile Yavaş Şehir kavramının gelişim süreci ve bir yerleşmenin Yavaş Şehir olabilmesi için gerçekleştirmesi gereken kriterler ortaya konarak Türkiye’deki yavaş şehirlerin değerlendirilmesi amaçlanmıştır. Anahtar kelimeler: Yerel Kimlik, Sürdürülebilir Gelişme, Sürdürülebilir Şehirler, Yavaş Şehir (Cittaslow).
756
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Role Of Cittaslow Movement For Sustaining Local Identity Ümmügülsüm TER1,*, Mete ADIGÜZEL 2 1
Necmettin Erbakan University, Faculty of Engineering and Architecture, Department of City and Regional Planning, Konya, Turkey 2 Necmettin Erbakan University, Faculty of Engineering and Architecture, Department of City and Regional Planning, Konya, Turkey *Responsible author e-mail:
[email protected]
Abstract Local identity constituted with unique characteristics differentiates cities from the others. Transferring the local identity that is formed with a relationship between culture and lifestyle to the next generations is only possible by preserving local characteristics and ensuring sustainable development. In recent years, settlements due to the influence of globalization have begun to resemble each other by losing their local characteristics, and have faced the danger of losing their local identities. The Slow City (Cittaslow) movement that is decelerated in Italy in 1999 has been an important point to ensure the preservation and sustainable development of the traditional characters and local characteristics of the settlements. The Slow City movement is a city union that arises from the Slow Food movement in order to prevent the standardization of the textures, calmness and lifestyles of cities that are arisen as a consequence of the pressure of urbanization, and to preserve their local characteristics. The Slow City movement is an approach based on preserving and maintaining local identity of the settlements’ characteristics such as authentic settlement texture, lifestyle, regional cuisine, traditional handicrafts, in the context of ecological and sustainability approach. The study is aimed to reveal historical development of the Slow City movement, to set the criteria that must be fulfilled by cities in order to become a Slow City, and to evaluate Cittaslow cities in Turkey. Key words: Local Identity, Sustainable Development, Sustainable Cities, Slow City (Cittaslow).
757
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Ticari Ürünlerdeki Bazı Azo Renklendiricilerinin ICA-ANN Kemometrik Yöntemiyle Aynı Anda Tayini Ümran ÖZER1,*, A. Hakan AKTAŞ1 Süleyman Demirel Üniversitesi, Fen-Edebiyat Fakültesi, Kimya Bölümü, Isparta -Türkiye *Sorumlu yazar e-posta:
[email protected]
1
Özet Bu çalışmada, ticari bir toz içecek numunesinde bulunan ve renklendirici olarak kullanılan tartrazine (TAR), allura red (ALL) ve sunset yellow (SUN) konsantrasyonları spektrofotometrik metotla ve kemometrik kalibrasyonlar kullanılarak tayin edildi. Tartrazine, allura red ve sunset yellow maddeleri piyasada bulunan bazı içecek tozlarında, ilaç ve kozmetik gibi çok kullanılan preparatlarda ve bazı gıdalarda ticari olarak kullanılan azo renklendiricilerdir. Bu renklendiricilerin kullanılan miktarları kanun ve yönetmeliklerle belirlenen sınırları aşacak olursa, insan sağlığında istenmeyen toksik etkilere neden olur. Bu nedenlerden dolayı, özellikle sıcak mevsimlerde oldukça çok tüketilen içecek tozlarında ve sentetik karışımlarında TAR, ALL ve SUN'ın kantitatif tayini, araştırılması gereken ilginç bir konu olarak karşımıza çıkmaktadır. Çalışmanın deneysel aşamasında, tartrazine, allura red ve sunset yellow karışımının spektrofotometrik verilerine, geriye yayılım öğrenmesiyle eğitilmiş bağımsız bileşen analizi -yapay sinir ağı (ICA-ANN) uygulandı. Ağ yapısını optimize ederek çalışmanın doğruluğu geliştirilmiştir. Bu çalışmanın amacı, katı faz spektrofotometri kullanarak ticari ürünlerdeki renk verici karışımlarını tayin etmek için yeni gelişmekte bir yöntem olan ICA-ANN yöntemlerinin uygulanmasını önermektir. Bu yöntemler, TAR, ALL ve SUN içeren ticari içme tozu numunelerine uygulanmıştır. Önerilen yöntemler hızlı, kolay uygulanabilir, ucuzdur ve ticari ürünlerdeki renklendiricilerin analizi için uygundur. Yöntem hassasiyet ve seçicilikten yararlanır. Bu spektrofotometrik çok değişkenli tekniklerden elde edilen sonuçlar, alternatif olarak Kısmi en küçük kareler (PLS) yöntemi ile karşılaştırılmıştır. Anahtar kelimeler: Spektrofotometri, azo renklendiriciler, ICA, ANN.
758
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Simultaneous Determination Of Some Azo Colorants In Commercial Products By ICA-ANN Chemometric Methods Ümran ÖZER1,*, A. Hakan AKTAŞ1 1
Süleyman Demirel University, Science and Art Faculty, Department of Chemistry, Isparta Turkey *Responsible author e-mail:
[email protected]
Abstract The concentrations of tartrazine (TAR), allura red (ALL) and sunset yellow (SUN) in ternary mixtures and commercial preparation were determined by the combined use of chemometric calibrations and spectrophotometric method. Tartrazine, allura red and sunset yellow are azo colorants used commercially in some coloring foods, such as soft drinks powders, drugs and cosmetics in order to make them attractive. These colorants cause toxic effects an human health if their quantities exceed the limits set by the laws and regulations. Therefore, the quantitative determination of TAR, ALL and SUN in synthetic mixtures and commercial soft drink powder is an interesting issue to be investigated. The Independent component analysis - Artificial neural network (ICA-ANN) trained by back-propagation learning was applied to process spectrophotometric data of mixed tartrazine, allura red and sunset yellow. By optimizing the network structure, accuracy was enhanced. The aim of this study is to propose the application of ICAANN methods to resolve mixtures of colorants in commercial products by using solid phase spectrophotometry. These methods were applied to the commercial soft drinking powder samples containing TAR, ALL and SUN. The proposed methods are rapid, easy to apply, inexpensive and suitable for analyzing the colorants in commercial products. The method takes advantage of sensitivity and selectivity. The results from these spectrophotometric multivariate techniques were compared with each other as well as obtained by alternative Partial least squares (PLS) method. Key words: Spectrophotometry, azo colorants, ICA, ANN .
759
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Kurumlar ve Ekolojik Sürdürülebilirlik: Gelişmekte Olan Ülkeler Üzerine Bir Analiz Ünzüle KURT1,*, Zehra DOĞAN ÇALIŞKAN2, Feyza BALAN2 Çanakkale Onsekiz Mart Üniversitesi, Çanakkale, Türkiye 2 Abant İzzet Baysal Üniversitesi, Bolu, Türkiye Çanakkale Onsekiz Mart Üniversitesi, Çanakkale, Türkiye
1
*Sorumlu yazar e-posta:
[email protected]
Özet 1990’lı yıllardan itibaren büyüme, yoksulluk, gelir dağılımı adaletsizliği gibi ekonomik sorunları açıklamaya yönelik demokrasinin varlığı, siyasi, ekonomik ve yasal özgürlükler, hukukun üstünlüğü, sivil haklar, yolsuzluğun ölçüsü, ekolojik değişme, çevresel tahribat, iklim değişikliğinin etkileri gibi ekonomik olmayan -ancak ekonomi ile sıkı ilişki içerisinde olan- bir takım kavramlar eklenmeye başlamıştır. Ekonomik sorunları açıklayabilme ve ekolojik sürdürülebilirliği sağlamada kurumsal altyapı ve değişim sürecinin anlaşılması bir gereklilik halini almıştır. Bu gereklilikten hareketle, çalışmada, doğanın üretken kapasitesini gelecek nesiller için azaltmadan kullanımını ifade eden ekolojik sürdürülebilirlik, ekonomik, yasal ve politik kurumlar çerçevesinde ele alınmış ve aralarındaki olası ilişki panel EKK yöntemi ile araştırılmıştır. Kurumların varlığının kişi başına düşen karbondioksit salınımı ile temsil edilen ekolojik sürdürülebilirlik üzerindeki etkisini tespit edebilmek için 2000-2010 yılları esas alınmış olup çalışmaya Türkiye dahil 55 gelişmekte olan ülke dahil edilmiştir. Analiz sonuçlarına göre ekonomik kurum endeksi ile karbondioksit salınımı arasında pozitif, yasal kurum endeksi ile karbondioksit salınımı arasında negatif yönlü bir ilişki tespit edilirken, politik kurum endeksi ile karbondioksit salınımı arasında ise istatistiksel olarak anlamlı bir ilişki tespit edilememiştir. Analiz sonuçları, ülkelerdeki ekonomik özgürlükler ile açıklanan ekonomik kurum endeksi ile karbondioksit salınımı arasındaki bu pozitif ilişki ekonomik özgürlük düzeyi artan ülkelerde yatırımlar aracılığı ile karbondioksit salınımlarının artacağını, hukuki düzenlemeler ve yasal çerçeve ile açıklanan yasal kurum endeksindeki iyileşmelerin de karbondioksit salınımını azaltıcı düzenlemeler ile ilişkilendirilebileceğini ortaya koymaktadır. Politik özgürlükler ile bağlantılı olan politik kurum endeksi ile karbondioksit salınımı arasında istatistiksel bir ilişkiye rastlanılmamış olması da çalışmanın teorik olarak beklenen sonuçları ile uygunluk göstermektedir. Bu çerçevede ülkelerde kurumsal çerçevede ekonomik özgürlüklerin artmasına paralel olarak artan sanayi üretimi ve karbondioksit salınımı yasal çerçevenin düzenlenmesi ile dengelenebilecektir. Anahtar kelimeler: Kurumsal Ekonomi, Ekolojik Sürdürülebilirlik, Çevresel Ekonomi.
760
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Institutions and Ecological Sustainability: An Analyse on Developing Countries Ünzüle KURT1,*, Zehra DOĞAN ÇALIŞKAN2, Feyza BALAN2 Çanakkale Onsekiz Mart Üniversitesi, Çanakkale, Türkiye 2 Abant İzzet Baysal Üniversitesi, Bolu, Türkiye Çanakkale Onsekiz Mart Üniversitesi, Çanakkale, Türkiye *Responsible author e-mail:
[email protected]
1
Abstract Concepts such as the existence of the democracy, political, economic and legal freedoms, rule of law, civil rights, the scale of malpractice, ecologic change, environmental destruction, effects of climatically change which are not economic but in a good relationship with economy are being compiled in order to explain economic concepts such as growth, poverty and injustice of income distribution. The understanding of institutional infrastructure and the process of change have been a necessity for the explanation of economic problems and providing ecological sustainability. Based on this necessity, the research was taken into account within the framework of ecological sustainability, economic, legal and political institutions explaining the usage of the productive capacity of the environment without reducing it for the future generations and the relationship between them was researched within the framework of least squares method. The years between 2000-2010 were based on in order to determine the effect of existence of institutions on the ecological sustainability via carbon dioxide emission per person and 55 developing countries including the Turkey were included in the research. According to the analysis results, a positive relationship was observed between the economic institution index and the carbon dioxide emission, a negative relationship was observed between the legal institution index and the carbon dioxide emission and no statistically significant relationship was observed between the legal institution index and the carbon dioxide emission. The analysis results demonstrate that the positive relationship between the economic institution index explained by the economic freedom in countries and the carbon dioxide emission will lead to an increase in the level of carbon dioxide emission with investigations in countries with improved economic freedom levels and the improvements in the legal institution index explained by the legal arrangements and legal framework can be related to the regulations reducing the carbon dioxide emission. The fact that no relationship was encountered between the political institution index and the carbon dioxide emission demonstrates sustainability with the expected result of the research. Within this framework, increased industrial production and carbon dioxide emissions in parallel with the rise of economic freedoms in the institutional framework in countries will be balanced by the regulation of the legal framework. Key words:Corporate Economy, Ecological Sustainability, Environmental Economy.
761
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Çamoluk Örneğinde Sürdürülebilir Yaylacığın Coğrafi Analizi Yahya KADIOĞLU1,*, Gürbüz GÜR2 1
Ondokuz Mayıs Üniversitesi Fen-Edebiyat Fakültesi Coğrafya Bölümü, Samsun, Türkiye 2 Ondokuz Mayıs Üniversitesi Sosyal Bilimler Enstitüsü, Samsun, Türkiye *Sorumlu yazar e-posta:
[email protected]
Özet Çamoluk İlçesinden yapılan göçler sonucunda köylerde tarım ve hayvancılık eski önemini kaybetmiştir. Bunun sonucunda yaylacılık faaliyetlerinde önemli bazı değişimler yaşanmaya başlamıştır. Hayvancılık amaçlı yaylacılık eski önemini kaybederken, rekreasyonel amaçlı yaylacılık gelişmeye başlamıştır. Hayvancılığın yöre ekonomisindeki önemi azalmıştır. Yöre sakinleri yaylalara daha çok dinlenmek ve gezmek amacıyla çıkmaya başlamıştır. Özellikle ilçe dışında yaşayan gurbetçiler yöreye geldiklerinde bu tür aktivitelere daha fazla katılmaktadır. Değişim meskenlere de yansımıştır. Doğal çevreden temin edilen malzemelerle yapılan basit tek odalı meskenlerin yerini çağdaş yapı malzemeleri kullanılarak inşa edilen birden fazla odalı meskenler almaya başlamıştır. Yaylalara çıkan hayvan sayısının azalmasıyla hayvansal ürünler de ticari önemini kaybetmiştir. Rekreasyonel yaylacılık yöre ekonomisine katkı sağlayacak büyükte olmadığından bu dönüşüm yöre ekonomisine şimdilik bir dinamizm getirememiştir. Bunun en önemli nedeni ulaşım ve alt yapı eksikliğidir. Yaylardaki mevcut rekreasyonel potansiyelin değerlendirilmesi için söz konusu eksikliklerin giderilmesi gerekir. Bu çalışmada Çamoluk yaylalarındaki fonksiyonel dönüşümün sebep ve sonuçları araştırılmış, dönüşüm sonucundaki olumsuzluklar tespit edilerek çözüm önerileri geliştirilmiştir. Geleneksel yaylacılıkla rekreasyonel amaçlı yaylacılık karşılaştırılmıştır. Çalışmanın literatüre katkı sağlayacağı düşüncesindeyiz. Çamoluk İlçe Tarım Müdürlüğü’nden alınan veriler analiz edilmiş, çalışmada gezi-gözlem yöntemi ve nicel-nitel veri toplama teknikleri kullanılmıştır. Bu kapsamda ilçede bulunan köy muhtarları ve köylülerin görüşleri yarı yapılandırılmış görüşme formu ile elde edilmiştir. Çamoluk yaylalarının turizm açısından zengin doğal güzelliklere ve yaban hayatına sahip olduğu tespit edilmiştir. Rekreasyonel amaçlı yaylacılığın sürdürülebilir bir şekilde geliştirilmesi gerekmektedir. Anahtar kelimeler: Çamoluk, Fonksiyonel dönüşüm, Yaylacılık, Rekreasyonel yaylacılık.
762
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Geographical Analysis Of Sustainable Transhumance In Case Of Çamoluk Yahya KADIOĞLU1,*, Gürbüz GÜR2 Ondokuz Mayıs University Faculty of Science and Letters Geography Department, Samsun, Turkey 2 Ondokuz Mayıs University, Graduate School of Social Sciences, Samsun, Turkey *Responsible author e-mail:
[email protected]
1
Abstract As a consequence of the immigrations coming from Çamoluk district, agriculture and livestock have lost its significance. As a result of this, there have been some important changes in the transhumance activities. While transhumance for the purpose of livestock has lost its importance, transhumance for recreational purposes has begun to develop. The importance of livestock has decreased in the region’s economy. The locals in the region have begun to go up the uplands rather for relaxation and travelling purposes. Especially when the expats living outside the district come back to the region, they participate in such activities more. The change has also reflected on the dwellings. Multiple room dwellings constructed by using modern construction materials have started to replace with the simple single room dwellings made from materials supplied from the natural environment. With the decrease in the number of animals going up the uplands, the animal products have lost their commercial value. Since recreational transhumance does not have such a size to contribute to the regional economy, this transformation has not brought a dynamism to the regional economy for now. The most significant reason for this is the lack of transportation and infrastructure. These deficiencies in question should immediately be solved in order to make use of the recreational potential in the uplands. In this study, the causes and the results of the functional transformation in the Çamoluk uplands were researched and solution offers were developed by determining the negativities that occurred as a result of the transformation. Traditional transhumance and recreational transhumance were compared. We believe that the study would make contribution to the literature. The data received from the District Directorate of Agriculture of Çamoluk were analyzed; and in the study, travel-observation methods and quantitative-qualitative data collection techniques were used. In this context, the opinions of the village headmen and the villagers were collected through a semistructured interview form within the district. It has been found that Çamoluk uplands have rich natural beauties and wild life in terms of tourism. Development of recreational transhumance in a sustainable manner will contribute significantly to the region economy. Key words: Sustainable transhumance, livestock, transformation.
763
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Manavgat İlçesi’deki Turistik Çekiciliklerin Sürdürülebilir Turizm Açısından Değerlendirilmesi Yahya KADIOĞLU1,*, Murat Mustafa AK2 Ondokuz Mayıs Üniversitesi, Samsun, Türkiye Ondokuz Mayıs Üniversitesi, Samsun, Türkiye *Sorumlu yazar e-posta:
[email protected] 1 2
Özet Antalya turizm destinasyonun bir parçası olan Manavgat doğal ve kültürel birçok turizm kaynağını bünyesinde barındırmaktadır. Kıyıdaki kumsallar, Olukköprü Milli Parkı Titrenyengöl, Değirmendere Çağlayanları, Manavgat Irmağı ve Çağlayanı başlıca doğal turistik çekicilikleri oluşturur. Manavgat turizminde tarihi ve kültüre kaynaklar kıyı turizmiyle önem kazanmış ve günümüzde en çok ziyaret edilen alanlardan olmuştur. Bu kaynakların başında Side, Seleukei, Selge ve Ettenna antik kentleri gelir. Side antik kenti surları, anıtsal çeşmesi, hamamları, tapınakları ve müzesiyle ziyaretçilerine tarihi anıları hissettirecek görsel zenginlik sunmaktadır. Turizmin 1980’li yıllardan sonra gelişimi kıyılarda otel, motel, pansiyon vb. konaklama tesislerinin hızla çoğalmasına neden olmuştur. Turizmde meydana gelen hızlı gelişim ve daha çok tüketime dayalı kitlesel turizm, plansız yapılanma ve aşırı kapasite kullanımı ile telafisi olmayan olumsuz gelişmeleri de beraberinde getirmiştir. Bu çalışmada, Manavgat turizmine kaynaklık eden doğal, tarihi ve kültürel çekicilikler sürdürülebilirlik kapsamında değerlendirilmiştir. Kaynakların kullanılırken bozulmaması, dengenin korunması ve yerel ekonominin desteklenmesi gerekir. Kaynaklar gelecek nesillerin de yararlanması için korunarak kullanılmalıdır. Kaynak kullanımındaki tahribatın tesbiti için arazi çalışması yapılmış ve elde edilen veriler sürdürülebilir turizm çerçevesinde swot analiziyle denetlenmeye çalışılmıştır. Çalışma sonucunda Manavgat İlçesi’ndeki doğal ve kültürel değerlerin mevcut turizm anlayışı çerçevesinde sürdürülebilir olmadığı anlaşılmıştır. Turistik çekicilikler ivedilikle sürdürülebilir bir yararlanma yöntemiyle değerlendirilmelidir. Aksi takdirde turizm yöredeki hakim ekonomik fonksiyon olma özelliğini kaybetme tehlikesiyle karşı karşıya kalacaktır. Anahtar kelimeler: Turizm, turistik çekicilikler, koruma, yararlanma.
764
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Evaluation Of Tourist Attractions In Manavgat District In Terms Of Sustainable Tourism Yahya KADIOĞLU1,*, Murat Mustafa AK2 Ondokuz Mayıs Üniversitesi, Samsun, Türkiye Ondokuz Mayıs Üniversitesi, Samsun, Türkiye *Responsible author e-mail:
[email protected] 1 2
Abstract Manavgat, a part of the tourism destination Antalya, has many natural and cultural tourism resources. Sandy beaches, Olukköprü National Park Titrenyengöl, Değirmendere Waterfalls, Manavgat River and Waterfall are the main natural tourist attractions. In Manavgat tourism, historical and cultural resources have gained importance through coastal tourism and Manavgat has become one of the most visited areas today. Side, Seleukei, Selge and Ettenna ancient cities are primary ones among these resources. Side ancient city offers visual richness that will make its visitors to feel historical memories with its walls, monumental fountain, bathhouses, temples, and museum. Development of tourism after 1980s has caused a rapid growth of accommodation facilities like hotels, motels, boardinghouses etc. on the coasts. Rapid development in tourism and mass tourism mainly based on consumption have also brought unplanned structuring and overcapacity usage along with non-recoverable negative developments. In this study, the natural, historical and cultural attractions that are the resources in Manavgat tourism were evaluated within the scope of sustainability. It is required for the resources not to be disrupted while using them, for the balance to be protected and for local economy to be supported. Resources should be used by protecting them so that the future generations can also benefit from them. Field study was carried out to determine the damage in the use of resources and the obtained data were tried to be monitored by SWOT analysis within the scope of sustainable tourism. It has been understood as a result of the study that the natural and cultural values in Manavgat district are not sustainable within the framework of current tourism understanding. Touristic attractions should be immediately evaluated by a sustainable utilization method. Otherwise, tourism will be faced with the danger of losing its feature of becoming a dominant economic function in the region. Key words: Tourism, tourist attractions, protection, utilization.
765
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sürdürülebilir Tarımın Manavgat Ekonomisindeki Yeri Ve Önemi Yahya KADIOĞLU1,*, Yusuf YILMAZ2, Murat Mustafa AK3 Ondokuz Mayıs Üniversitesi Fen Edebiyat Fakültesi Coğrafya Bölümü, Samsun/Türkiye 2 Ondokuz Mayıs Üniversitesi Sosyal Bilimler Enstitüsü, Samsun/Türkiye 3 Ondokuz Mayıs Üniversitesi Sosyal Bilimler Enstitüsü, Samsun/Türkiye * Sorumlu yazar e posta:
[email protected]
1
Özet Manavgat ilçesinin ekonomik yapısı turizm ve tarım sektörüne bağlıdır. Bu iki sektör sıkı bir rekabet içindedir. Hızlı betonlaşma su kaynaklarını tehdit etmeye başlamış, yaz mevsiminin kurak geçtiği yıllarda sulama suyu temininde sorunlar ortaya çıkmıştır. Tarımda çalışan nüfusun turizme yönelmesiyle tarımsal işgücü azalmış ve tarım işçisi bulmak zorlaşmıştır. Tarımsal potansiyeli yüksek Manavgat Ovası hızlı bir betonlaşma tehlikesiyle karşı karşıya kalmıştır. Ovada eğim ve yükselti azdır. Akdeniz iklim özellikleri görüldüğünden tarımsal ürün çeşitliliği fazla ve yetişme süresi uzundur. Yıl içinde birden fazla ürün yetiştirme imkânı vardır. Sulu tarım olanakları sayesinde verim yüksektir. Özellikle kıyıda yoğunlaşan turunçgil, sebze ve seracılık tarım alanları için risk faktörü artmıştır. Manavgat’ta kışların kısa sürmesi ve donlu günlerin çok az olmasından dolayı seralarda yakıt maliyetleri çok düşüktür. Bu nedenle seracılık karlı bir ekonomik faaliyet koludur. Ancak kıyı kesimindeki turistik tesisler seraların azalmasına neden olmuştur. Turizm bir yandan tarımsal üretimde ciddi bir tehdit oluştururken, diğer yandan tarım ürünlerinde talep artışına neden olmuştur. Bu çalışmanın amacı sürdürülebilir tarımın Manavgat ekonomisindeki rolünü ve önemini ortaya çıkarmaktır. Son yıllarda turizm sektöründeki hızlı gelişme tarım alanları üzerinde artan bir baskına dönüşmüş, Manavgat İlçe Merkezi’nin genişlemesi ve turistik tesislerin artması verimli tarım alanlarını daraltmaya başlamıştır. Mekânsal değişim sürdürülebilir tarım için risk ortaya çıkarmıştır Anahtar kelimeler: Betonlaşma, Tarım, Turizm, Ürün.
766
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Place And Importance Of Sustainable Agriculture in The Manavgat Economy Yahya KADIOĞLU1,*, Yusuf YILMAZ2, Murat Mustafa AK3 Ondokuz Mayıs Üniversitesi Fen Edebiyat Fakültesi Coğrafya Bölümü, Samsun/Türkiye 2 Ondokuz Mayıs Üniversitesi Sosyal Bilimler Enstitüsü, Samsun/Türkiye 3 Ondokuz Mayıs Üniversitesi Sosyal Bilimler Enstitüsü, Samsun/Türkiye *Responsible author e-mail:
[email protected]
1
Abstract The economic structure of Manavgat district depends on tourism and agriculture sector. These two sectors are in intense competition. Rapid concreting has begun to threaten water resources, and problems have arisen in the irrigation water supply in the years when the summer season has passed. The population working in agriculture is oriented towards tourism the agricultural labor force has decreased and it is difficult to find agricultural workers. The high agricultural potential of Manavgat Ovası has been faced with a risk of rapid concretization. The slope and the height of the oval are small. Because of the Mediterranean climate characteristics, the variety of agricultural products is high and the growing period is long. It has the opportunity to grow more than one product during the year. The yield is high thanks to irrigated agricultural facilities. Risk factors for citrus, vegetable and greenhouse farming areas, especially concentrated on the coast, have increased. In Manavgat, fuel costs are very low in the greenhouses due to the short duration of winters and very few frosty days. For this reason, greenhouse is a profitable economic activity. However, the tourist facilities on the coast have caused the decrease of greenhouses. On the one hand, tourism poses a serious threat to agricultural production and on the other hand it caused an increase in demand for agricultural products. The aim of this study is to reveal the role and importance of sustainable agriculture in the economy of Manavgat. In recent years, the rapid development in the tourism sector has become an increasing pressure on agricultural areas, the expansion of the Manavgat District Center and the increase of touristic facilities have begun to narrow the fertile farming areas. Spatial change poses a risk for sustainable agriculture. Key words: Concretisation, Agriculture, Tourism, Product.
767
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Ütopya Türü Eserlerde Çevre Eleştirisi Ve Çevrenin Sürdürebilirliği Yakup AKYÜZ1,* Karamanoğlu Mehmetbey Üniversitesi Sorumlu yazar e-posta:
[email protected] 1
*
Özet Rönesans’la beraber insan merkezli düşüncenin felsefede hâkim olması çevreye bakışı da insanın merkezinde yer aldığı bir eksene oturtmuştur. Rönesans düşüncesinin getirdiği en önemli olgulardan biri yeni bilim anlayışı ile tabiatı anlamak ve anlamlandırmak olmuştur. Yeni insan kendisi değişip dönüşürken aynı zamanda ilişki içinde olduğu çevresini de değiştirip dönüştürmüştür. Bu durum insanın hegemon canlı olarak çevresine bakmasını ve dönüştürmesini getirmiştir. Rönesans’la beraber yazılan ütopya türü eserlerde dikkat çeken husus değişen insanın olumsuz olarak çevreyi de değiştirdiğidir. Bu değişim olumlu olmadan ziyade olumsuz olmuş ve çevrenin korunma ve sürdürülebilir olmasına pek bir olanak sağlamamıştır. Rönesans ütopyalarında çevreye çok az dikkat çekilmiştir. Oluşan yeni koşullarla modern ve ilerlemeci insan en çok çevre üzerinde tahribata neden olmuştur. Hızlı bir şekilde tükenen ve yok olan doğallığa tepki olarak ütopyanın türü olarak ekotopya türü eserler yazılmıştır. Eserlerdeki ana tema yeni koşulların en fazla çevre üzerinde tahribata yol açtığına dikkat çekmektir. Bu noktada 20 yy’da yeni bir tür olarak sunulan ekotopya türü eserler çevre eleştirisine ve çevrenin sürdürülebilirliğine olan inancı sağlamaya yöneliktirler. Bildirimizde Rönesans’tan başlayarak bu eserler bağlamında çevre-insan ilişkisi ve çevrenin sürdürülebilirliği hususuna dikkat çekilecektir. Anahtar kelimeler: Ütopya, ekotopya, çevre, sürdürülebilirlik.
768
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Environmental Reviews And Environmental Sustainability In The Utopias Yakup AKYÜZ1,* 1Karamanoğlu Mehmetbey Üniversitesi *Responsible author e-mail:
[email protected]
Abstract Human-centered thinking has taken place on the basis of philosophy along with the Renaissance. This situation, assessment of enviroment is centered on the humanity. One of the most important events brought about by Renaissance thought was to understand the nature with new understanding of science. New human is changing and taransforming itself, at the same time he has transformed and changed the enviroment. The remarkable issue about the environment in Renaissance utopias is the lack of an assessment on the environment. For this reason, ecotoppia works have been written in the 20th century. The purpose of the work take care destruction of enviroment by hand modern and progressive human and to create a sustainable environment. Key words: Utopia,ecotopia, enviroment, sustainability.
769
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Atık Plastiklerin Biyo-Bozunum Çalışmaları Başak Berna PALABIYIK 1, Yalçın Aşkın ÖKTEM*1 1
İstanbul Üniversitesi, Mühendislik Fakültesi, Çevre Mühendisliği Bölümü, İstanbul, Türkiye *Sorumlu yazar e-posta:
[email protected]
Özet Plastikler, 1900’lerin başında tesadüfen icat edilen ve günümüz modern hayatında oldukça büyük bir kullanım alanına sahip olan maddelerdir. Atık haline geldiğinde ise ciddi bir çevresel problem olarak karşımıza çıkmaktadır. Birçok plastik malzemesi olmasına karşın düşük yoğunluklu polietilen (LDPE), yüksek yoğunluklu polietilen (HDPE), PP, PVC, PS ve PE terefetalat (PET) toplam talebin %90’ınını karşılamaktadır. Yakın tarihlerde küresel plastik üretimi yıllık %6’lık bir artışla 265 milyon tona ulaşmıştır (2010 itibarı ile). Plastiklerin önemli bir grubunu termo plastikler ve diğer bir grubunu ise termosetler oluşturmaktadır. Sentetik plastiklerin deterjanlar, kimyasallar, kozmetikler, yiyecek, farmosötikler gibi maddelerin paketlenmesinde geniş bir kullanım alanı bulunmaktadır. Bunlar; PE (LDPE, HDPE, MDPE ve LLDPE), PP, PS PVC, PU, PET, polibütülen terefitalat, naylonlar gibi maddelerdir. Her yıl dünyamızda yaklaşık 140 milyon ton sentetik polimer üretilmektedir. Amerika Birleşik devletlerinde toplanan kentsel çöpün yaklaşık %20’si, Avusturalya da ise düzenli depolama alanına getirilen çöpün toplam ağırlığının %25’ini sentetik polimerler oluşturmaktadır. Üretilen atıklar içinde bulunan plastik grupları ne tamamen nihai bileşenlerine ayrılmakta, ne de doğru biçimde depolanabilmektedir. Artan bu kirlilik; klorlanmış plastiklerin topraklara bıraktığı kimyasallar ile yeraltısuyu kirliliğine, okyanus ve denizlerde ise plastik parçacıklar birincil üreticilerden üst sınıf canlılara kadar ekosistemin çeşitli düzeylerinde zararlara, plastiğin bir formu olan ve sakızlarda, oyuncaklarda, gözlüklerde, atılabilir şişelerde ve poşetlerde ise insanlara direkt zarar verebilmektedir. Yaşam döngüsü içinde civa, dikosin, fitalat gibi zehirli kimyasallar bırakan PVC, geri dönüşsüz yaşam boyu sağlık tehditleri oluşturabilir. Yakıldığında ya da üretimi sırasında serbest bırakılan dioksin yine kanser, immün ve üreme sistemlerinde zararlara yol açabilmektedir. Ekosisteme zarar vermeyen bertaraf süreçleri içinde en uygun olanı biyolojik bozunmadır. Mikroorganizmalar hem sentetik hem de doğal polimerlerin bozunumunda kullanılabilmektedir. Ancak plastiklerin bozunması oldukça yavaş bir süreçtir ve kontrol eden parametreler araştırmaya oldukça açıktır. Sıcaklık, pH gibi çevresel faktörler, bu tür materyalleri karbon ve enerji kaynağı olarak kullanan mikroorganizmalar için oldukça önemlidir. Bunlardan bakteri ve mantar, literatürde plastiklerin bozunmasında en yoğun çalışılan grupları oluşturmaktadır. Laboratuvar ya da farklı ölçekte konu ile ilgili yapılan çalışmalar incelenmiş ve karşılaştırılmalı olarak irdelenmiştir. Anahtar kelimeler: Atık plastikler, biyo-bozunum, mikroorganizma, bozunma ürünleri.
770
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Studies of Biodegradation at Waste Plastics Başak Berna PALABIYIK 1, Yalçın Aşkın ÖKTEM*1 1
İstanbul University Engineering Faculty,, Environmental Engineering Dept., İstanbul, Türkiye * Responsible author e-mail:
[email protected]
Abstract Plastics are materials that have been invented by chance at the beginning of the 1900's and have a very large use in today's modern life. When it becomes waste, it becomes a serious environmental problem. Low density polyethylene (LDPE), high density polyethylene (HDPE), PP, PVC, PS and PE tapelets (PET) supply with 90% of total demand despite the fact that there are many plastic materials. In recent years global plastic production has increased by 6% year on year to 265 million tonnes (as of 2010). An important group of plastics is thermoplastics and the other group is thermosets. Synthetic plastics have a wide range of uses for packaging materials such as detergents, chemicals, cosmetics, food, pharmaceuticals. These; PE (LDPE, HDPE, MDPE and LLDPE), PP, PS PVC, PU, PET, polybutylene terephthalate, nylon and etc. Approximately, 140 million tons of synthetic polymer are produced each year in world . Synthetic polymers account for approximately 20% of the urban waste collected in the United States and 25% of the total weight of the garbage brought to the landfill site in Australia. The plastic groups contained in the produced wastes are neither completely degraded into final components nor stored correctly. This increased pollution; plastic particles in the oceans and seas can directly damage people at various levels of ecosystem damage from primary productivity to upper level creatures and in the form of plastic and in the form of gum, toys, glasses, disposable bottles, and bags in the case of chlorinated plastics. PVC, which releases poisonous chemicals such as mercury, dioxin, and phthalate in the life cycle, can cause irreversible lifetime health threats. Dioxin, which is liberated when it is burned or produced, can also cause damage to the cancer, immunological and reproductive systems. Biodegradation is the most appropriate disposal process that does not damage the ecosystem. Microorganisms can be used in the decomposition of both synthetic and natural polymers. However, the degradation of plastics is a very slow process and the controlling parameters are quite clear to investigate. Environmental factors such as temperature and pH are very important for microorganisms that use such materials as carbon and energy source. Bacteria and fungi constitute the most intensively studied groups in the literature for degradation of plastics. Studies conducted in the laboratory or at different scales were examined and compared in a comparative way. Key words: Waste plastics, bio-degradation, microorganism, products of degradation.
771
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Türkiye’de Kültürel Miras Yönetimi’ne İlişkin Düzenlemelerin Sürdürülebilir Kalkınma Hedefleri Açısından İrdelenmesi Yaşagül EKİNCİ DANIŞAN1,* Trakya Üniversitesi, Dış İlişkiler Birimi, Edirne, Türkiye Bergama UNESCO Dünya Mirası Alan Başkanı, İzmir, Türkiye * Sorumlu yazar e-posta:
[email protected] 1
Özet Türkiye’de kültürel mirasın bütünleşik yönetilmesine ilişkin en önemli adım 2004 yılında ‘’Kültür ve Tabiat Varlıklarını Koruma Kanunu’’na ‘’Alan Yönetimi’’ kavramının eklemlenmesi ile atılmıştır. 2005 yılında çıkartılan 26006 sayılı ‘’Alan Yönetimi’’ne ilişkin yönetmelik ise kültürel mirasın yönetilmesi ve planlanması hususundaki ayrıntılara dokunan ilk düzenleme oldu. Bu düzenlemelerin ardından geçen son on yılda uluslararası alanda kalkınma ile ‘’kültür, tarihi kentler, kültürel miras, kültür turizmi’’ vb. ilişkilendiren ‘’bütünleşik kültürel miras yönetimi’’ konuları yoğun şekilde kavramsal ve hukuksal düzlemde yapılandırılmış ve pratikler üzerinden ise geliştirilmiştir. 2015 yılında Birleşmiş Milletler tarafından 2030 vizyonu çerçevesinde kabul edilen ‘’Sürdürülebilir Kalkınma Hedefleri’’nin kültürel miras yönetimine entegrasyonu ise temel amaç olarak UNESCO, AB, UNDP, Dünya Bankası gibi uluslararası örgütlerin ve yanı sıra insani gelişme ve kalkınma endekslerinde en geride bulunan Afrika, Latin Amerika ve Asya-Pasifik ülkelerinin düzenleme ve çalışmalarında hızlıca yer edinmiştir. Bu çabaların ilk adımlarını Dünya ile birlikte atan Türkiye’nin, ardından geçen on senede uluslararası alanda yaşanan gelişmeleri iç düzenleme ve uygulamalarına adapte etmekte zorlanmış olduğunu ve özellikle uluslararası düzlemdeki ‘’kültürel mirasların kalkınma sağlayıcı potansiyellerini ortaya çıkarma’’ yöneliminden uzakta kaldığını görmekteyiz. Bu çalışma ile Türkiye’nin uluslararası alanda yaşanan değişimleri ne oranda takip edebildiği, ‘’Sürdürülebilir Kalkınma Hedeflerini’’nin kültürel miras yönetimine entegrasyonu konusunda neler yapabileceği irdelenmektedir. Anahtar kelimeler: Türkiye, Kültürel Miras, Kültürel Miras Yönetimi, Sürdürülebilir Kalkınma, Kalkınma Politikaları, Miras Politikaları.
772
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
A Study Concerning the Legislation on Cultural Heritage Management in the Context of the Sustainable Development Goals in Turkey Yaşagül EKİNCİ DANIŞAN1,* 1
Trakya University Rectorate, International Relationship Office, Edirne, Turkey Bergama UNESCO World Heritage Manager, İzmir, Turkey *Responsible author e-mail:
[email protected]
Abstract The most important step in the integrated cultural heritage management in Turkey was taken in 2004 with the participation of the ''Site Management concept'' in the ‘Law on the Conservation of Cultural and Natural Property, numbered 2863’’. Regulation No. 26006 on "Site Management" issued in 2005 was the first legal arrangement dealing with the details of the management and planning of cultural heritage. In the last decade following these arrangements, in the international environment "integrated cultural heritage management" which relates "culture, historical cities, cultural heritage, cultural tourism etc." and "development", has been advanced and structured on a conceptual and legal level while intensive practices have been put forward. The integration of the 2030 Agenda for Sustainable Development, adopted by the United Nations in 2015, into cultural heritage management has quickly taken its place in the work of international organizations such as UNESCO, EU, UNDP and the World Bank. Integration efforts have also come to the forefront in heritage and cultural arrangements and practices in Africa, Latin America and Asia-Pacific countries, which are at the bottom of the human development index. Turkey, which has taken the first steps of these efforts together with the World, has been having difficulty adapting the improvements experienced in the international community in the last ten years and Turkey is away from international orientations about '' uncovering the development potentials of cultural heritage''. In this study, it is examined how Turkey can follow the recent progresses that are experienced in the international environment and what can be done to integrate 'Sustainable Development Goals' into cultural heritage management. Key words: Turkey, Cultural Heritage, Cultural Heritage Management, Sustainable Development, Development Politics, Politics of Heritage.
773
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Ters Faz Sıvı Kromatografi Metodu ile Lösemi Tedavisinde Kullanılan 6-Tioguaninin iyonlaşma ve Protonasyon sabitlerinin Tayini Y. Doğan DALDAL1,*, Güleren ALSANCAK1, Ebru ÇUBUK DEMİRALAY1 Süleyman Demirel Üniversitesi , Isparta, Türkiye *Sorumlu yazar email:
[email protected]
1
Özet Tioguanin, (2-Amino-1,7-dihidro-6H-pürin-6-tiyon), bir nükleik asit bileşeni olan, guanine yapıca benzeyen kemotropik bir ilaçtır. Kemotropik özelliklerinden dolayı tioguanin kanserin bazı tiplerinde ve özelliklerde löseminin tedavisinde kullanılır. İlaçın sitotoksik etkisi insanlarda kemik iliği hücrelerinde DNA ve RNA ile nükleotidlerin kemik içerisinde birleşmesi sonucu oluşur. Biyolojik ve farmosötik numunelerde tioguaninin sıvı kromatografik metotlarla tayinine yönelik çok sayıda çalışma vardır. Fakat HPLC tekniğinin kullanıldığı tioguaninin iyonlaşma/protonasyon sabitine (pKa) yönelik hiçbir çalışma yoktur. İyonlaşma/protonasyon sabiti (pKa), pH’ ya göre bir molekülün iyonlaşma derecesini tahmin etmek için önemli bir parametredir. İlaç bileşiklerinin çoğu asidik veya bazik fonksiyonel gruplara sahip oldukları için, ilaçların iyonlaşan kısımları çözeltinin pH ve pKa değerleriyle kontrol edilebilir. pKa değerlerinin tayini için potansiyometrik titrasyon, spektrofotometri, yüksek performans sıvı Kromatografi ve kapiler elektroforez metotlarını içeren çeşitli deneysel yöntemler kullanılır. Bu teknikler arasında, çoğu ilaçlar hız, özgünlük, doğruluk, kesinlik ve metodun otomasyonunun kolay olması gibi avantajlarından dolayı ters faz sıvı kromatografi (RPLC) tekniği ile analiz edilebilmektedir. Bu çalışmada asetonitril yüzdeleri % % 1, %, 3, % 5, %7 ve % 10 (h/h) olan asetonitril-su ikili karışımlarındaki kromatografik verileri kullanılarak tioguaninin iyonlaşma/ protonasyon sabitleri (pKa) ters faz sıvı kromatografik metotla tayin edilmiştir. Bu ilacın pKa değerleri, sigmoidal ve doğrusal olmayan modeller kullanılarak hesaplanmıştır. Bu bileşiğin sudaki pKa değerleri asetonitril-su karışımlarında tayin edilen hareketli faz pKa değerleri kullanılarak Yasuda- Shedlovsky eşitliğinden ve organik modifiyerin mol kesri ve hareketli faz pKa değerleri arasındaki lineer eşitlikten hesaplanmıştır. Anahtar kelimeler: Tioguanin, kemotropik ilaç , pKa, Doğrusal Olmayan Model, RPLC.
774
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Determination of Ionization and Protonation Constants of 6Thioguanine used in The Treatment of Leukaemia With Reversed Phase Liquid Chromatography Method Y. Doğan DALDAL1,*, Güleren ALSANCAK1, Ebru ÇUBUK DEMİRALAY1 Süleyman Demirel University, Isparta, Turkey *Responsible author e-mail:
[email protected]
Abstract Thioguanine (2-Amino-1,7-dihydro-6H-purine-6-thione) is a chemotherapeutic drug which is closely related to guanine, a constituent of the nucleic acid. Due to its chemotherapeutic properties, thioguanine is often applied in the treatment of some types of cancer, mostly leukaemia. The cytotoxic effect of the drug results mostly from the merge of the nucleotides with DNA and RNA in bone marrow cells in humans. There are available reports on the use of several liquid chromatographic methods in the process of thioguanine determination in biological and pharmaceutical samples. Yet, there are not reports on ionization/protonation constant (pKa) of thioguanine based on HPLC technique. pKa is a crucial parameter to predict the ionization state of a molecule with respect to pH. Since most of the drug compounds have acidic and/or basic functionalities, their ionization state is controlled by both solution pH and pKa values. Various experimental modalities have been used for the determination of the pKa values, comprising potentiometric titration, spectrophotometry, high performance liquid chromatography (HPLC) and capillary electrophoresis methodologies. Among these techniques, most drugs can be analyzed by reversed phase liquid chromatography (RPLC) technique because of several advantages like rapidity, specificity, accuracy, precision and ease of automation in this method. In this study, ionization /protonation constant (pKa) of thioguanine using chromatographic data in acetonitrile-water binary mixtures with acetonitrile percentages of 1%, 3%, 5%, 7% and 10% (v/v) were determined with reverse phase liquid chromatographic method (RPLC). The pKa values of the drug were calculated using sigmoidal and non linear models. The aqueous pKa values of this compound were calculated from the mobile phase pKa values determined in several organic modifier-water mixtures by means of the YasudaShedlovsky equation and linear relationship between the mole fraction of organic modifier and the mobile phase pKa values. Key words: Thioguanine, chemotherapeutic drug, pKa, non linear model, RPLC.
775
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Asetonitril-Su İkili Karışımlarında 6-Merkaptopürinin Kromatografik Davranışının İncelenmesi Y. Doğan DALDAL1,*, Ebru ÇUBUK DEMİRALAY1 Süleyman Demirel Üniversitesi , Isparta, Türkiye *Sorumlu yazar email:
[email protected]
1
Özet Merkaptopürin (3,7-dihidropürin-6- tiyon) başta çocukluk lösemisi olmak üzere, kanser kemoterapisinde kullanılan bir pürin analoğudur. Bu ilaç antimetabolitler adı verilen kemoterapi ilaçları sınıfına aittir. Kanser hücreleri büyümek ve tekrar üremek için fonksiyonel DNA' ya ihtiyacı olduğunda, merkaptopürin vücuttaki kanser hücrelerinin büyümesini durdurur veya yavaşlatır. Biyolojik ve farmosötik numunelerde merkaptopürinin sıvı kromatografik metotlarla tayinine yönelik çok sayıda çalışma vardır. Fakat HPLC tekniğinin kullanıldığı merkaptopürinin kromatografik davranışının incelenmesine yönelik hiçbir çalışma yoktur. Mobil faz olarak kullanılan hidroorganik ortamda iyonlaşma/protonasyon sabiti (pKa) değerlerinin bilinmesi analitlerin kromatografik davranışlarının açıklanabilmesi için çok kullanılışlıdır. Bu değerler hakkındaki bilgi bileşiklerin tayini için analitik metotların geliştirilmesi ve optimum kromatografik koşulun seçilmesi için gereklidir. Bu çalışmada ilacın kromatografik davranışı izokratik ters faz sıvı kromatografik (RPLC) yöntemle incelenmiştir. Alıkonma faktörleri (k) çalışılan mobil faz bileşimleri ve pH değerleri kullanılarak belirlenmiştir. hesaplanmıştır. Farklı derişimlerdeki asetonitril oranlarında (% 1, %, 3, % 5, %7 ve % 10, h/h) merkaptopürinin pKa değerleri ve alıkonma faktörleri NLREG programı ile hesaplanmıştır. Bu ilacın pKa değerlerinin tayini için alıkonma faktörleri pH 2,59,0 aralığında elde edilmiştir. Farklı derişimlerdeki asetonitril-su ikili karışımlarından elde edilen deneysel veriler (k-pH) bileşik için grafiğe geçirildiğinde sigmoidal eğri gözlenmiştir. Su ortamındaki iyonlaşma/protonasyon sabitlerinin belirlenmesi rutin ilaç geliştirilmesi için vazgeçilmez bir gereksinimdir. Bu çalışmada ayrıca mobil faz pKa değerlerinden sudaki pKa değerinin belirlenmesi için iki farklı yaklaşım kullanılmıştır. Anahtar kelimeler: 6- merkaptopürin, pürin anolog, kemoterapi, pKa, RPLC.
776
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Investigation of Chromatographic Behaviour of 6-Mercaptopurine in Acetonitrile-Water Binary Mixtures Y. Doğan DALDAL1,*, Ebru ÇUBUK DEMİRALAY1 Süleyman Demirel University, Isparta, Turkey *Responsible author e-mail:
[email protected]
Abstract Mercaptopurine (3,7-dihydropurine-6- thione) is a purine analogue that has been used in cancer chemotherapy, primarily in childhood leukemia. This drug belongs to the class of chemotherapy drugs called “antimetabolites”. Since cancer cells need functional DNA to grow and reproduce, mercaptopurine slows or stops the growth of cancer cells in body. There are available reports on the use of several liquid chromatographic methods in the process of mercaptopurine determination in biological and pharmaceutical samples. Yet, there are not reports on investigation of chromatographic behaviour of mercaptopurine based on HPLC technique. The knowledge of the ionization/protonation constant (pKa) in hydroorganic media used as mobile phases can be very useful in explaining the chromatographic behavior of analytes. The information about these values is necessary to choose the optimal chromatographic conditions for develop of analytical methods for their determination. In this study, the chromatographic behavior of drug was investigated by using isocratic reversed phase liquid chromatography (RPLC) method. The retention factors (k) were determined for each mobile phase composition and studied pH values. The pKa values and the retention factors of mercaptopurine in different acetonitrile ratios (1%, 3%, 5%, 7% and 10%, v/v) calculated by NLREG program.The retention factors were obtained over a pH range of 2.5-9.0 in order to determine the pKa of this drug. Experimental data obtained at different acetonitrile-water binary mixtures (k vs pH) are plotted for compound, showing the sigmiodal curves. Evaluation of aqueous ionization/protonation constants is an unavoidable requirement in routine drug development. In this study, two different equations to estimate the aqueous pKa from the mobile phase pKa values were also used. Key words: 6-Mercaptopurine, purine analogue, chemotherapy, pKa, RPLC.
777
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Artan Miktarlarda Mikoriza Uygulamalarının Bebek Havuç (Daucus carota L.) Bitkisinin Bazı Makro Element Beslenmesi Üzerine Etkileri Yusuf SOLMAZ1,*, Aydın ADİLOĞLU1, Funda ERYILMAZ AÇIKGÖZ2, Korkmaz BELLİTÜRK1, Sevinç ADİLOĞLU1 1 2
Namık Kemal Üniversitesi, Ziraat Fakültesi, Toprak Bilimi ve Bitki Besleme Bölümü, Tekirdağ, Türkiye Namık Kemal Üniversitesi, Teknik Bilimler Meslek Yüksekokulu, Bitkisel ve Hayvansal Üretim Bölümü Tekirdağ, Türkiye *Sorumlu yazar e-posta:
[email protected]
Özet Bu araştırma artan miktarlarda mikoriza uygulamasının baby havuç (Daucus carota L.) bitkisinin bazı makro besin elementi ile beslenmesi üzerine olan etkilerinin belirlenmesi amacı ile yapılmıştır. Bunun için sera koşullarında tesadüf blokları deneme desenine göre üç paralelli olarak bir saksı denemesi düzenlenmiştir. Saksılara 4 kg toprak konulmuştur ve baby havuç (Daucus carota L.) tohumları ekilmiştir. Her saksıda çimlenme sonrası üç bitki bırakılmıştır. Denemede kullanılan toprak örneğinin bazı fiziksel ve kimyasal özelikleri şu şekildedir; pH: 6.5, EC x106: 700, organik madde miktarı: % 3.9, kireç: % 5.2, değişebilir potasyum K2O: 128 kg da-1, yarayışlı fosfor P2O5: 9.25 kg da-1 ve tekstür sınıfı: kil olarak belirlenmiştir. Saksılara altı mikoriza dozu uygulanmış (I. doz: 0 mL /saksı, II. doz: 120 mL / saksı, III. doz: 150 mL / saksı, IV. doz: 180 mL / saksı, V. doz: 210 mL / saksı ve VI. doz: 240 ml/ saksı) ve bitkiler iki ay sonunda hasat edilmiştir. Daha sonar bitki örneklerinde P, Ca ve Mg analizleri yapılmış ve sonuçlar SPSS 21 istatistik program ile değerlendirilmiştir. Elde edilen sonuçlara göre, artan mikoriza dozları ile birlikte bitkinin P, Ca ve Mg içeriklerinde önemli artışlar ve azalmalar olduğu belirlenmiştir. Bitkinin P içerikleri % 0.05 %, % 0.09, % 0.10, % 0. 16, % 0.12 ve % 0.11, Ca içerikleri % 1.24, % 2.61, % 2.47, % 2.87, % 2.43ve % 2.68, Mg içerikleri ise % 1.06, % 2.53, % 1.36, % 1.94, % 2.08 ve % 0.90 şeklinde bulunmuştur. Söz konusu bu değerler istatistiksel olarak % 5 düzeyinde önemli bulunmuştur. Bitkinin en yüksek besin elementi içerikleri ise IV. doz: 180 mL / saksı uygulamasından elde edilmiştir. Anahtar kelimeler: Mikoriza, makro element, bebek havuç (Daucus carota L.).
778
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Effects of Increasing Mycorrhiza Application on Some Macro Element Nutrition of Baby Carrots (Daucus carota L.) Plant Yusuf SOLMAZ1,*, Aydın ADİLOĞLU1, Funda ERYILMAZ AÇIKGÖZ2, Korkmaz BELLİTÜRK1, Sevinç ADİLOĞLU1 1
Department of Soil Science and Plant Nutrition/Namık Kemal University, Tekirdağ, Turkey Department of Plant and Animal Production/Namık Kemal University, Tekirdağ, Turkey *Responsible author e-mail:
[email protected]
2
Abstract The research was done to determine the effect of increasing mycorrhiza application on some macro nutrient element contents of baby carrots (Daucus carota L.) plant. Since baby vegetables have become very popular in recent years, they have been preferred in the research. For this purpose, a pot experiment was done according to randomized block experimental design, with three replications in greenhouse conditions. Soil samples filed in pots 4 kg soil / pot. Baby carrots seeds were sown as pots. Three plants were left in each pot. Some chemical properties of soil sample as, pH: 6.5, EC x106: 700, organic matter: 3.9 %, lime: 5.2 %, exchangeable potassium (K2O: 128 kg da-1), available phosphorus (P2O5: 9.25 kg da-1) and texture: Clay (C). Six mycorrhiza doses (I. dose: 0 mL /pot, II. dose: 120 mL / pot, III. dose: 150 mL / pot, IV. dose: 180 mL /pot, V. dose: 210 mL /pot and VI. dose: 240 ml/ pot) were applied and plant samples were harvested 60 days after sowing. Some macro nutrient elements (P, Ca, Mg) contents of plants were determined. Analysis results were evaluated SPSS 21 statistically program. According to the experiment results, important increases and decreases in some macro nutrient element contents of baby carrots plant were determined with increasing mycorrhiza applications. The contents were determined as P (0.05 %, 0.09 %, 0.10 %, 0. 16 %, 0.12 % and 0.11 %), Ca (1.24 %, 2.61 %, 2.47 %, 2.87 %, 2.43% and 2.68 %), Mg (1.06 %, 2.53 %, 1.36 %, 1.94 %, 2.08 % and 0.90 %) These P, Ca and Mg contents were determined significant at the level of 5 %, statistically. The highest nutrient element contents of baby carrots plant were obtained IV. dose: 180 mL /pot applications for P, Ca, and Mg nutrient elements. Key words: Mycorrhiza, macro element, baby carrots (Daucus carota L.).
779
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Artan Miktarda Bor Uygulamasının Yaygın Fiğ (Vicia sativa L.) Bitkisinde Bazı Makro Besin Elementleri İçeriğine Etkisi Yusuf SOLMAZ1,*, Hazım Serkan Tenikecier2 1
Namık Kemal Üniversitesi, Ziraat Fakültesi, Toprak Bilimi ve Bitki Besleme Bölümü, Tekirdağ, Türkiye 2 Namık Kemal Üniversitesi, Ziraat Fakültesi, Tarla Bitkileri Bölümü, Tekirdağ, Türkiye * Sorumlu yazar e-posta:
[email protected]
Özet Bu çalışma artan dozlardaki bor uygulamasının yaygın fiğ bitkisinde, bazı makro besin elementlerinin içerikleri üzerindeki etkisini belirlemek amacıyla yapılmıştır. Saksı denemesi olan çalışma rastgele blok düzeni deney tasarımına göre planlanmış olup üç tekerrürlü olarak sera koşullarında kurulmuştur. Saksılara 4 kg toprak konulmuş ve 30 cm çaplı saksılara 30 adet yaygın fiğ tohumu ekilmiştir. Denemede 5 farklı bor dozu uygulanarak (I. doz: 0 mg kg-1 , II. doz: 10 mg kg-1, III. doz: 20 mg kg-1, IV. doz: 30 mg kg-1, V. doz: 40 mg kg-1) ekilen bitkiler 60 gün sonunda hasat edilmiş ve örneklerdeki bazı makro besin elementleri (P, K, Ca, Mg) analiz edilmiştir. Sonuçlar SPSS 18 istatistik programında değerlendirilmiştir. Analiz sonuçlarına göre incelediğimiz makro elementlerin düzeylerinde önemli yükselişler ve düşüşler belirlenmiştir. elde etiiğimiz sonuçlar şu şekildedir: P (0.22 %, 0.24 %, 0.27 %, 0. 32 % ve 0.54 %), K (2.80 %, 2.84 %, 2.86 %, 2.61 %, ve 2.00 %), Ca (2.02 %, 1.94 %, 2.18 %, 2.49 % ve 1.93 %), Mg (0.27 %, 0.26 %, 0.26 %, 0.28 % ve 0.31 %) elde ettiğimiz sonuçlar istatistiksel olarak % 5 düzeyinde önemli bulunmuştur. Yapılan çalışma sonucunda bitkilerin besin elementi içeriklerinde en yüksek düzey P ve Mg elementleri için V. dozda, Ca elementinde IV. dozda, K elementinde ise III. dozda tespit edilmiştir. Anahtar kelimeler: Bor, Makro element, Yaygın Fiğ.
780
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Effect of Increased Boron Applications on Some Macro Nutrient Elements Contents in Common Vetch (Vicia sativa L.) Plant Yusuf SOLMAZ1,*, Hazım Serkan Tenikecier 2 1
Department of Soil Science and Plant Nutrition/Namık Kemal University, Tekirdağ, Turkey 2 Field Crops Department /Namık Kemal University, Tekirdağ, Turkey *Responsible author e-mail:
[email protected]
Abstract The research was done to determine the effect of increasing boron application on some macro nutrient element contents of common vetch plant. A pot experiment was done according to randomized block experimental design, with three replications in greenhouse conditions. Soil samples filled in pots 4 kg soil / pot. Thirty common vetch seeds sown in to 30 cm diameter pots. Five different Boron doses (I. dose: 0 mg kg-1 , II. dose: 10 mg kg-1, III. dose: 20 mg kg-1, IV. dose: 30 mg kg-1, V. dose: 40 mg kg-1) were applied and plant samples were harvested 60 days later from sowing date. Some macro nutrient elements (P, K, Ca, Mg) contents of plants were determined. Analysis results were evaluated SPSS 18 statistically program. According to the experiment results, important increases and decreases in some macro nutrient element contents of common vetch plants were determined with increasing boron applications. The contents were determined as P (0.22 %, 0.24 %, 0.27 %, 0. 32 % and 0.54 %), K (2.80 %, 2.84 %, 2.86 %, 2.61 %, and 2.00 %), Ca (2.02 %, 1.94 %, 2.18 %, 2.49 % and 1.93 %), Mg (0.27 %, 0.26 %, 0.26 %, 0.28 % and 0.31 %) These P, K, Ca and Mg contents were determined significant at the level of 5 %, statistically. The highest nutrient element contents of common vetch plant were obtained V. dose: 40 mg kg-1 applications for P and Mg nutrient elements, the highest value for the Ca nutrient element was determined at the IV. dose 30 mg kg-1, and for K the highest value was the III. dose: 20 mg kg-1. Key words: Boron, macro element, ,Common Vetch (Vicia sativa L.)
781
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sertakonazolün Dermatolojik Formülasyonunda Tayini İçin RPHPLC-UV Metodunun Optimizasyonu ve Validasyonu Zehra ÜSTÜN1,*, Ebru ÇUBUK DEMİRALAY1 Süleyman Demirel Üniversitesi, Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
Özet Antifungal, antibakteriyel, antiinflamatuar ve antipruritik özelliklere sahip geniş spektrumlu bir imidazol ajan olan Sertakonazol, en son ABD Gıda ve İlaç İdaresi tarafından onaylanan topikal antifungal bir ajandır. Bu etkilerine ek olarak, iyi bir güvenlik profilinin yanında deride uzun süreli tutunma ve düşük sistemik absorpsiyon özelliklerine sahiptir ve bu özelliklerin topikal uygulama için ideal olduğu bilinmektedir. Dermatolojik formülasyonda sertakonazolün tayini için izokratik yüksek basınçlı sıvı kromatografi (HPLC) ve UV dedeksiyon kullanılarak basit ve hızlı bir metot geliştirilmiştir. Bu çalışmanın amacı, mobil faz pH’sı ile kapasite faktörleri arasındaki ilişkiye dayanarak optimum ayırma koşulunu belirlemektir. Kromatografik ayrım için sıcaklığı 25oC’de sabit tutulan bir Pinnacle DB Cyano (5 µm, 250 x 4.6 mm) kolon kullanılmıştır. Akış hızı 1 mL/dakikadır ve bileşik 202 nm’de dedekte edilmiştir. Sertakonazol numuneleri mobil fazdan oluşan çözelti ile ekstrakte edilmiştir ve analiz 15 dakikadan daha az sürede tamamlanmıştır. Geliştirilen metot 2-10 µg/mL konsantrasyon aralığında doğrusaldır ve deneyde iç standart olarak oksikonazol kullanılmıştır. Validasyon deneyleri metodun doğruluğu ve kesinliği kullanılarak değerlendirilmiştir. Kesinlik çalışmaları iki konsantrasyonda gerçekleştirilmiş ve %RSD değerleri hesaplanmıştır. Sertakonazol için dedeksiyon ve kantifikasyon limitleri sırasıyla 0,609 µg/mL ve 1,847 µg/mL olarak bulunmuştur. Metodun geri kazanımı %102,1 olarak belirlenmiştir. Geliştirilen metot ICH tarafından önerilen lineerlik, doğruluk, kesinlik ve sistem uygunluk parametrelerine göre başarıyla valide edilmiştir. Anahtar kelimeler: Sertakonazol, antifungal ajan, RPLC, metot validasyonu, dermatolojik formülasyon.
782
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Optimization and Validation of RP-HPLC-UV Method for Determination of Sertaconazole in Dermatological Formulation Zehra ÜSTÜN1,*, Ebru ÇUBUK DEMİRALAY1 1
Suleyman Demirel University, Isparta, Turkey *Responsible author e-mail:
[email protected]
Abstract Sertaconazole, a broad-spectrum imidazole agent with antifungal, antibacterial, antiinflammatory, and antipruritic properties, is the topical antifungal agent most recently approved by the US Food and Drug Administration. In addition to these efficacies, it has a good safety profile, sustained cutaneous retention, and low systemic absorption, all of which make it ideal for topical applications. A rapid and simple method using an isocratic high-pressure liquid chromatography (HPLC) and UV dedection for the determination of Sertaconazole in dermatological formulations is presented. The aim of present study was to determined optimum separation conditions on a relationship between mobile phase pH and retention factors. A Pinnacle DB Cyano (5 µm, 250 x 4.6 mm) column maintained at 25oC was used for chromatographic determination. The flow rate was 1 mL/min and eluent was monitored at 202 nm. Sertaconazole samples were extracted with a solution composed of mobile phase by a procedure that can be completed less than 15 min. The improved method was linear over a concentration range of 2-10 µg/mL and oxiconazole was used as internal standard in the experiment. Validation experiments evaluated the precision and accuracy of the method. The precision studies were determined with two concentrations and RSD% values were calculated. The limit of detection (LOD) and the limit of quantification (LOQ) values for sertaconazole were found to be 0.609 μg/mL and 1.847 μg/mL respectively. The recovery of the developed method was found to be 102.1%. The method developed was successfully validated in accordance with ICH guidelines with regard to linearity, accuracy, precision and system suitability. Key words: Sertaconazole, antifungal agent, RPLC, method validation, dermatological formulation.
783
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Lanokonazolün İnsan İdrarında Ters Faz Sıvı Kromatografik Tayini Zehra ÜSTÜN1,*, Ebru ÇUBUK DEMİRALAY1 Süleyman Demirel Üniversitesi, Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
Özet Dermatofitler, insanlarda ve hayvanlarda kutanöz enfeksiyonlara neden olan ve üç anamorfik cins Trichophyton, Microsporum, Epidermophyton olarak sınıflandırılan keratinofilik küflerin bir familyasıdır. Dermatofitlerin 40'ı aşkın türü tespit edilmiştir, bunların bazıları dünya çapında en yaygın cilt, saç ve tırnak enfeksiyonu ajanları arasındadır. Son çalışmalar, lanokonazolün in vitro antifungal duyarlılık testinde Trichophyton ve Epidermophyton'a karşı güçlü etkisi olduğunu göstermektedir. Ayrıca yapılan hayvan çalışmaları, lanokonazolün dermatofitoz ve onikomikoz tedavisinde etkili olduğunu da ileri sürmüştür. Belirtilen bu özelliklerinden dolayı, bu ilacın kimyasal ve klinik analizleri gelecek çalışmalar için büyük önem taşımaktadır. Mevcut çalışmada, insan idrarında lanokonazolün tayini ve kantitasyonu için ters faz sıvı kromatografik yöntem geliştirilmiştir. İdrar klinik çalışmalarda en çok tercih edilen biyolojik numunedir. Yapılan çalışmada, organik modifiyer içeriği ve mobil faz pH' sının lanokonazolün kromatografik davranışı üzerindeki etkileri araştırılmış ve idrar numunesindeki validasyon çalışmaları başarılı bir şekilde gerçekleştirilmiştir. Kromatografik ayırım Pinnacle DB Cyano kolon (250 x 4,6 mm, 5 µm) kullanılarak gerçekleştirilmiş ve UV dedektör 202 nm’ ye ayarlanmıştır. Metot, dedeksiyon limiti (LOD, 0,647 µg/mL), kantitasyon limiti (LOQ, 1,961 µg/mL) ve gün içi-günler arası bağıl standart sapmalar (RSD, <1%) kullanılarak valide edilmiştir. Üç konsantrasyon seviyesinde katkılandırılmış idrar numunelerinden elde edilmiş ortalama geri kazanım değeri %99’dan büyük olarak hesaplanmıştır. Geliştirilen yöntemin, lanokonazolün insan idrarındaki farmakokinetik çalışmaları için hızlı, hassas ve doğru bir yöntem olduğu görülmüştür. Anahtar kelimeler: Dermatofitler, lanokonazol, kromatografik tayin, metot validasyonu, insan idrarı.
784
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Reversed Liquid Chromatographic Determination of Lanoconazole in Human Urine Zehra ÜSTÜN1,*, Ebru ÇUBUK DEMİRALAY1 1
Suleyman Demirel University, Isparta, Turkey *Responsible author e-mail:
[email protected]
Abstract Dermatophytes are a unique family of keratinophilic molds, which cause cutaneous infections in humans and animals and are classified in three anamorphic genera, that is, Trichophyton, Microsporum and Epidermophyton. More than 40 species of dermatophytes have been identified, some of which are among the most common agents of skin, hair, and nail infections, worldwide. Recent studies, in vitro antifungal susceptibility testing of lanoconazole demonstrated potent efficacy against Trichophyton and Epidermophyton. In addition, animal studies suggested that lanoconazole is effective in treating dermatophytosis and onychomycosis. Due to these specified properties, any chemical and clinical analysis of this drug is of great importance for further studies. In existing study, a reversed phase liquid chromatographic method for the determination and quantitation of lanoconazole in human urine was developed. Urine is the most preferred biological sample for clinical analysis. In the present work, the effects of organic modifier content and mobile phase pH on the chromatographic behaviour of lanoconazole were investigated and validation from urine sample were carried out successfully. The chromatographic separation was realized using a Pinnacle DB Cyano column (250 x 4.6 mm i.d., 5 µm particles) and UV detector set at 202 nm. The method were validated by determining the limit of detection (LOD, 0.647 µg/mL), the limit of quantitation (LOQ, 1.961 µg/mL) and intra-day and inter-day relative standard deviations (RSDs, <1%). Recoveries obtained from spiked urines at three concentration levels were calculated and the mean recovery was greater than 99%. The improved method demonstrate that a rapid, sensitive and accurate method for the analysis of lanoconazole in human urine for pharmacokinetic studies. Key words: Dermatophytes, lanoconazole, chromatographic determination, method validation, human urine.
785
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Yapay Sinir Ağları ile Türkiye için Sektörel Net Elektrik Tüketimi Tahmini Zeynep ÖZSÜT BOĞAR1,*, Eşref BOĞAR2 Pamukkale Üniversitesi, Denizli, Türkiye Pamukkale Üniversitesi, Denizli, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2
Özet Son yıllarda teknolojik gelişmelerin ve nüfusun hızlı artışına bağlı olarak ihtiyaçlar da farklılaşmakta ve çoğalmaktadır. Bu ihtiyaçların karşılanmasında kıt kaynakların kullanımı söz konusudur ve bu kaynaklar hem ihtiyaçları karşılamalı hem de sürdürülebilir bir dünya için gelecek nesillere aktarılmalıdır. En büyük ihtiyaçlardan biri ise elektrik enerjisidir. Farklı kaynaklarla elektrik enerjisi üretilebiliyor olsa da, bu enerji büyük ölçüde doğal kıt kaynaklardan elde edilmektedir. Bu nedenle doğru planlamalar yapabilmek için, ihtiyaçların doğru bir şekilde tahmin edilmesi gerekmektedir. Gerek yapılan tahminlerdeki sapmaların ekonomik yansımaları, gerekse uzun vadede kaynakların etkin kullanımı konusunda toplumun bilinçlenmesi ve bu yönde adımlar atılıyor olması elektrik enerjisi tüketimi konusunun önemini artırmaktadır. Bu çalışmada, yapay sinir ağları kullanılarak Türkiye için sektörel olarak net elektrik tüketimi tahmini yapılmıştır. Gayri safi yurtiçi hasıla, nüfus, ithalat ve ihracat verileri girdi değişkenleri olarak ele alınmış, farklı sektörler dikkate alınarak çok çıkışlı bir tahmin modeli uygulaması yapılmıştır. Çalışmada 1970-2015 yıllarına ait Türkiye İstatistik Kurumu’ndan elde edilen veriler eğitim ve test aşamalarında kullanılmıştır. Hem sektörlerden bağımsız olarak genel toplam hem de mesken, ticaret, resmi daire ve sanayi sektörlerine göre 2016-2030 yılları için oluşabilecek tüketim miktarları tahmin edilmiştir. Ortalama mutlak hata ve ortalama hata kare yöntemleri ile önerilen modellerin performansları değerlendirilmiş, elde edilen sonuçlar birbirleri ile karşılaştırılmıştır. Sonuçlar, yapay sinir ağlarının elektrik tüketimi tahmininde etkin olarak kullanılabileceğini göstermektedir. Anahtar kelimeler: Yapay sinir ağları, Tahmin, Elektrik tüketimi, Türkiye.
786
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Estimation of Turkey’s Sectoral Net Electricity Consumption by Artificial Neural Networks Zeynep OZSUT BOGAR1,*, Esref BOGAR2 1
Pamukkale University, Denizli, Turkey Pamukkale University, Denizli, Turkey *Responsible author e-mail:
[email protected] 2
Abstract In recent years, needs have changing and increasing depend on technological developments and the rapid growth of the population. Scarce resources are used to meet these needs. These resources must be both transferred to next generations for a sustainable world and met the needs. One of the substantial needs is electricity energy that can be generated from different sources, but it is mostly obtained from natural scarce resources. Therefore, in order to make effective plans, the energy demands must be accurately estimated. Electricity consumption issue is getting more and more important due to economic impact of deviations in estimations, public awareness of the effective use of resources and the steps taken in this regard. In this work, net electricity consumption by sectors in Turkey is estimated by using artificial neural networks (ANN). Gross domestic product, population, import and export data are considered as independent variables, and a multi-output forecasting model is implemented considering different sectors. The data set which is obtained from the Turkish Statistical Institute between 1970 and 2015 are used in the training and test processes. General and sectorial (household, commercial, government, industrial and illumination) electricity consumptions are estimated for the years 2016-2030. Performance comparison among different models is made based on absolute and mean square error. The results show that ANN can be used effectively to estimate electricity consumption. Key words: Artificial neural networks, Estimation, Electricity consumption, Turkey.
787
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Parasetamol-metaklopramid kombinasyonunun Çoklu Doğrusal Regresyon İle Tayini Ziya MERMERTAŞ1,*, Güzide Pekcan ERTOKUŞ2 Süleyman Demirel Üniversitesi, Isparta, Türkiye Süleyman Demirel Üniversitesi, Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2
Özet Bu çalışmada, parasetamol-metaklopramid kombinasyonunun herhangi bir ayırma işlemi olmadan eşzamanlı olarak belirlenmesi için çoklu lineer regresyon yöntemi kullanılmıştır. Parasetamol-metaklopramid kombinasyonunun, eş zamanlı tayini spektrofotometrik olarak yapılmıştır. Çok değişkenli kalibrasyon yöntemleri iki veya daha fazla bileşik ihtiva eden karışımların spektral veri analizinde kullanılır. Kullanılan kemometrik yöntemler ile kemometrik-spektrofotometrik yöntem ve klasik UVspektrofotometrik yöntem karşılaştırmalı olarak kullanılmıştır. Yazılım, matematik ve istatistiğin kimya uygulaması olan kemometrinin, parasetamol-metaklopramid kombinasyonunun eş zamanlı tayinine uygulanmasını sağlanmıştır. Anahtar kelimeler: Paracetamol, Metaklopramit, Kemometri.
788
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Multi-Linear Regression of Paracetamol-metaclopramide Combination Ziya MERMERTAŞ1,*, Güzide Pekcan ERTOKUŞ2 1
Suleyman Demirel University, Isparta, Turkey Suleyman Demirel University, Isparta, Turkey *Responsible author e-mail:
[email protected] 2
Abstract In this study, multiple linear regression method was used to identify the paracetamolmetaclopramide combination simultaneously without any separation. Simultaneous determination of paracetamol-metachlopramide combination was performed spectrophotometrically. Multivariate calibration methods are used in the analysis of spectral data of mixtures containing two or more compounds. It was used chemometricallyspectrophotometric method and classical UV-spectrophotometric comparative method with the used chemometric methods. The software allowed mathematics and statistics to be applied to the simultaneous determination of the combination of chemometrin, paracetamolmetachlopramide. Key words: Paracetamol, Metaclopramide, Chemometry.
789
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sunset Yellow ve β-karoten Renk Maddelerinin Çoklu Doğrusal Regresyon İle Tayini Ziya MERMERTAŞ1,*, Güzide Pekcan ERTOKUŞ2 Süleyman Demirel Üniversitesi, Isparta, Türkiye Süleyman Demirel Üniversitesi, Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2
Özet Gıda katkı maddeleri genel anlamda “gıdaların özelliklerini istenilen biçimde etkilemek amacıyla kullanılan maddeler” olarak tanımlanmaktadır. Bu özellikler arasında görünüm, lezzet, koku, besleyici değer ve depolama ömrü sayılabilmektedir. Gıda katkı maddesinin görevi ürünün üretimi, taşınması ve depolanması gibi işlemler sırasında gıda maddesinin tat, koku, görünüş ve yapı özelliklerini korumak, düzeltmek bunun yanı sıra ürünün kalite ve raf ömrünü arttırmaktır. Bu maddeler üretim süreci içerisinde gıdaların yapısına katılabilecegi gibi bazen gıdalarda doğal olarak da bulunabilirler. Gıda katkı maddelerinin gıda endüstrisinde kullanımı teknolojik gereksinimlerden kaynaklanmaktadır. Ancak; bunun yanında; dünya nüfusundaki artışlar, gıda sektörünü besleyen hammadde kaynaklarındaki azalmalar, insanların yaşam standartlarını yükseltme eğilimleri gibi etmenler teknolojik buluşları yönlendirmistir. Bu çalışmada hayatımızda önemli yer tutan renk maddelerinin eş zamanlı spektrofotometrik olarak tayini bir istatistik yöntem ile gerçekleştirilmiştir. Bu istatistik yöntem verilerin kemometrik olarak değerlendirilmiş analitik olarak uyumlu bulunmuştur. Sunset yellow, β-karoten in bir içecek örneğinde miktar tayinini kemometrik yöntemin de üstünlüklerinden yararlanarak yapmak bize büyük kolaylık getirmiştir. Anahtar kelimeler: Sunset Yellow, β-karoten, Kemometri.
790
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Multi-Linear Regression of Sunset Yellow and β-Carotene Food Colorants Ziya MERMERTAŞ1,*, Güzide Pekcan ERTOKUŞ2 1
Suleyman Demirel University, Isparta, Turkey Suleyman Demirel University, Isparta, Turkey *Responsible author e-mail:
[email protected] 2
Abstract Food additives are generally defined as "substances used to affect the properties of foods in the desired manner". Among these properties are appearance, flavor, smell, nutritive value and storage life. The duty of the food additive is to protect and improve the taste, odor, appearance and structure properties of the food during the production, transport and storage of the product, as well as to increase the quality and shelf life of the product. These materials can be found naturally in foods, as they can participate in the structure of food within the production process. The use of food additives in the food industry is due to technological requirements. But; Besides; Factors such as increases in the world population, reductions in the raw material resources that feed the food industry, and the tendency to raise people's living standards have led to technological inventions. In this study, a simultaneous spectrophotometric determination of color materials which have an important place in our lives was carried out by a statistical method. These statistical method data were evaluated chemometrically and found to be analytically compatible. Sunset yellow, β-carotene in the case of a beverage in the quantitative determination of the advantage of the chemometric method has made us a great convenience. Key words: Sunset Yellow, β-karoten, Chemometry.
791
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Examining The Factors Responsible For The Variation In Accessibility To Health Care Facilities - Ghana Zulaihatu Hamidu1,*, K. Mert Cubukcu 2,* 1.Graduate School of Natural and Applied Sciences, City and regional planning, Dokuz Eylül University, Tinaztepe Campus, Izmir, Turkey. 2. City and regional Department, Architecture Faculty Dokuz Eylül University, Tinaztepe Campus, Izmir, Turkey. * Responsible author e-mail:
[email protected],
[email protected]
Abstract One of the current issues of discussions in recent times is on rapid population growth in the coming years and its accompanied consequence that are expected to take place in urban cities of developing counties and not in rural communities. Rapid population growth often occurs with is accompanied consequences rendering parts of cities not conducive for a living. To cap this accompanied consequence of population growth, analysts came out with a good number of critical socio-economic issues that needs to be addressed ahead of the expected growth. These include, adequate and decent housing, sanitation, adequate hospitals and schools, energy, jobs and different sources of income, sufficient open space for recreations etc. Among these critical socio-economic issues is adequate and accessible hospital, which many suggest should be given the greatest attention, for health is so important that it is sometimes equated to wealth of the people. Literature reviewed portrays that most researches on measuring accessibility to health care, concentrated on only socio-economic factors of the inhabitants and distance related factors without much assessment of the spatial structure. This necessitated this research that is to examine the factors responsible for the variations to health care facilities in a urban city of Tamale in Ghana, using online data from Arcmap GIS as well as data from the Tamale municipal planning unit and Health Directorate, the data was analyzed by using methods of spatial Analysis such as SANAT (spatial analysis along network and on the network), Network Analyst and Network Centrality index. The result revealed that spatial structure of the built environment of a city affects the accessibility levels of households to health care facility. This was because closeness of health facility to the city centre and a major principal road made some facilities more accessible than others using a walking distance of 500m. Key words: Variations, Spatial structure, Accessibility and Health care facilities, GIS, Tamale (Ghana).
792
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Burdur Kentsel Koruma Alanında Açık-Yeşil Alanların Rolü Z. Betül ÖZSOY1,*, Ali TÜRK2 Süleyman Demirel Üniversitesi, Isparta, Türkiye Süleyman Demirel Üniversitesi, Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected]
1 2
Özet Sanayi devriminden sonra başlayan sosyolojik, ekonomik, kültürel ve teknolojik değişimler, kırsal bölgelerden şehirlere göçlerin yoğunlaşması, 1980’li yıllarda başlayan küreselleşme olgusu ile devam ederek tarihi dokulara zarar vermiş, kültürel mirasa konu olan bu alanları yok olma tehlikesi ile karşı karşıya getirmiştir. Değişen yaşam koşulları; kültürel kaynakları, fiziksel, ekonomik ve sosyal eskimeye maruz bırakmıştır. Nüfus artışı, hızlı teknolojik gelişim, rant ve yapılaşma baskısı, tahrip, yıkım ve yok olma gibi etkenler, kent planlama ve koruma konusunda yeni yöntem ve yaklaşımların ortaya çıkmasına yol açmış, sürdürülebilirlik kavramı planlama ve koruma gündemine girmiştir. Bu sürecin kentsel arazi kullanımındaki mekânsal yansımaları; konut alanlarından, ulaşım sistemlerine, açık-yeşil alan kullanımlarına ve tarihi dokunun bulunduğu alanlara kadar uzanan değişim ve dönüşümler biçiminde olmuştur. Söz konusu bu değişim-dönüşüm sürecinde kentsel yaşamda açık ve yeşil alanların gerekliliği yadsınamayacak bir gerçektir. Açık-yeşil alanlar ekolojik, ekonomik, fiziksel, toplumsal, estetik işlevleri ile kaliteli yaşam çevrelerinin oluşumunda önemli rol oynamaktadırlar. Somut olarak tek tek algılanan açık ve yeşil alanlar kent içinde sürekli bir dizi halinde ve işlevsel bir yapı ortaya koyacak şekilde planlandıklarında kentin açık ve yeşil alan sistemini oluştururlar. Bunun için bu alanların kültürel mirasa ilişkin değerlerin sürdürülebilir korunması ve geliştirilmesi için verimli ve etkin kullanımı sağlayacak şekilde planlanması gerekir. Bu doğrultuda çalışmada, Burdur kentsel koruma alanında kültürel mirasa konu olan değerlerin sürdürülebilir korunması-geliştirilmesi için açık-yeşil alanların kullanımları değerlendirilecek ve bu alanların planlanması ile ilgili öneriler geliştirilecektir. Anahtar kelimeler: Sürdürülebilir Koruma, Kültürel Miras, Açık-Yeşil Alan, Burdur.
793
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
The Role of Open-Green Areas in Burdur Urban Conservation Area Z. Betül ÖZSOY1,*, Ali TÜRK2 Süleyman Demirel Üniversitesi, Isparta, Türkiye Süleyman Demirel Üniversitesi, Isparta, Türkiye *Responsible author e-mail:
[email protected] 1
2
Abstract The sociological, economic, cultural and technological changes that started after the industrial revolution, the intensification of migrations to cities from rural areas, the globalization that started in 1980s, and the damage of historical textures and the cultural heritage were brought against the danger of extinction. Changing living conditions; Cultural resources, physical, economic and social prejudice. Factors such as population growth, rapid technological development, rent and build-up pressure, destruction, destruction and destruction have led to the emergence of new methods and approaches to urban planning and conservation. The concept of sustainability has been on the agenda of planning and conservation. The spatial reflections of this process on urban land use; It is in the form of changes and transformations ranging from residential areas, transportation systems, opengreen space usage and historic touch areas. In other words, the necessity of open and green areas in urban life in this transformation-transformation process is an indisputable fact. Open-green spaces play an important role in the formation of quality living environments with ecological, economic, physical, social, aesthetic functions. The open and green areas, which are perceived individually, constitute the system of open and green areas of the city when they are designed in such a way as to form a continuous array and a functional structure in the city. This requires that these areas be planned in such a way as to ensure efficient and effective use for the sustainable protection and development of values related to cultural heritage. In this direction, the use of open-green areas for the sustainable protectiondevelopment of cultural heritage values in Burdur urban conservation area will be evaluated and proposals on the planning of these areas will be developed. Key words: Sustainable Conservation, Cultural Heritage, Open- Green Areas, Burdur.
794
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Bir Pasif Ev Tasarımı ve Rize İklim Şartlarında Standart Evlerle Karşılaştırılması Salih LAKA1,*, İsmail ilke KÖSE2 Recep Tayyip Erdoğan Üniversitesi, Teknik Bilimler M.Y.O,Rize, Türkiye Süleyman Demirel Üniversitesi, Yalvaç Teknik Bilimler M.Y.O,Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2
Özet Dünyamızda son yıllarda yaşanan teknolojik gelişmeler ve sanayileşme süreci enerji kullanımında yüksek oranda artışa neden olmuştur. Günümüzde mevcut enerji kaynaklarının hızla tükenmekte oluşu ve doğaya zararlı gazların verilmesi bütün dünyanın ortak sorunu haline gelmiştir. Bu sebeple yenilenebilir enerji kaynaklarının araştırılması ve geliştirilmesi üzerine ülkeler çeşitli araştırmalar içindedir. Kullanılmakta olan fosil kökenli yakıtların çevreye verdiği zarar ve ömürlerinin kısıtlı oluşu, insanları daha temiz, daha güvenilir olan yenilenebilir enerji sistemlerinin kullanımına yöneltmektedir. Dünyada hızla tüketilen enerjinin sektörlere göre dağılımı incelendiğinde büyük bir kısmının konutlar tarafından tüketildiği görülmektedir. Konutlarda harcanan enerji miktarı, sanayi harcamalarından sonra ikinci en yüksek orana sahiptir. Enerji üretiminin %30'a yakın kısmı konutlarda tüketilmektedir. Ülkemizdeki konutların %70-80'e yakını yalıtımsız ya da yetersiz yalıtımlı olduğu hesaplanmaktadır. Ülkemiz genelinde, konutların yalıtımının yapılması ve ısıtma işleminde kullanılan enerjinin alternatif enerji kaynaklarından sağlanması halinde önemli ölçüde tasarruf sağlanacağı ve daha uygun şartlarda enerji ihtiyacının karşılanacağı öngörülmektedir. Yaşanan çevre kirliliği de göz önüne alındığında, çevreye zararsız ve ekolojik bina tasarımlarının önemi ortaya çıkmaktadır. Yalıtım ve çevreye duyarlılık açısından Pasif Evler en üst seviyedeki yalıtımlı ve tasarruflu konut şeklidir. Pasif ev sistemleri minimum enerji, maksimum verim prensibiyle ve sıfır enerji gereksinimli ev yapma düşüncesiyle ortaya çıkmış olup, kaliteli bir dış kabukla ısıyı iç mekanda tutabilen, standart yapı sistemlerine göre çok düşük enerji ihtiyaç duyan yapılardır. Pasif Evler, inşa edilecek bölgenin sıcaklık verileri, hâkim rüzgârlar, güneşlenme faktörü gibi iklim şartları araştırılarak dış cephe yönlendirilmesi yapılan, yüksek oranda yalıtım içeren, ısıtma, soğutma, havalandırma, aydınlatma, hava sızdırmazlığı, çatı eğimi gibi birçok detayın düşünülerek mimari, statik, mekanik ve elektrik bileşenlerinin bir bütün olarak tasarlandığı ve yapımında oldukça yeni nesil teknoloji ve malzemelerin kullanıldığı, kendine ait bir takım standartları olması nedeniyle diğer ekolojik yapılardan ayrılan çevre dostu bir bina modeli olarak ifade edilmektedir. Rize iklim şartları dikkate alınarak bir Pasif Ev mimari planı oluşturulmuştur. Yüksek oranda yalıtım içeren bu evin yalıtım, ısı kaybı, ısı kazancı, yapı bileşenlerinin termofiziksel özellikleri, yapı bileşenlerinde sıcaklık ve basınç dağılımı ile yıllık ısıtma enerjisi ihtiyacı da pasif ev standart hesap verilerine göre hesaplanmıştır. Bu makale de sırasıyla enerji kavramı, Dünya’da ve Türkiye’de yenilenebilir enerji, enerji verimliliği ve binalar, enerji etkin bina tasarımı parametreleri, Pasif Evler ve Pasif Ev özelliklerinin Rize iklim şartlarında standart 795
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
evlerle karşılaştırılması konuları ele alınmıştır. Sonuç kısmında ise güzel ve yaşanabilir bir gelecek adına çevreye duyarlı, minimum enerji, maksimum verim prensibiyle daha az enerji tüketen devamlılığı olan mimari anlayışın gelişmesi ve yaygınlaşması gerektiğinin önemine vurgu yapılmıştır. Anahtar kelimeler : Pasif ev, Isıtma, Soğutma, Yalıtım, Enerji, Rize iklimi.
796
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
A Passive House Design And Comparison With Standard Houses İn Rize Climate Conditions Salih LAKA1,*, İsmail ilke KÖSE2 Recep Tayyip Erdoğan Üniversitesi, Teknik Bilimler M.Y.O,Rize, Türkiye Süleyman Demirel Üniversitesi, Yalvaç Teknik Bilimler M.Y.O,Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2
Abstract The technological developments and industrialization processes that have lived in our world in recent years have led to a high rate of increase in energy use. Today, the rapid depletion of existing energy resources and the release of harmful gases to the environment have become the common problem of the whole world. For this reason, countries are involved in various researches on the research and development of renewable energy sources. The fossil fuels being used have a limited impact on the environment and the limited lifetime of these fuels is driving people to use cleaner, more reliable renewable energy systems. When the distribution of energy consumed in the world according to the sectors is examined, it is seen that a large part is consumed by the houses. The amount of energy spent in the houses has the second highest rate after industrial expenditures. Nearly 30% of energy production is consumed in the residences. It is estimated that 70-80% of the houses in our country are insulated or insulated. In our country, it is envisaged that the insulation of the houses and the energy used in the heating process will be provided from alternative energy sources and that significant savings will be achieved and that the energy needs will be met under more favorable conditions. Taking into consideration the living environment pollution, harmless to the environment and ecological building design emerges. In terms of isolation and sensitivity to the environment, Passive Houses are the highest level of insulation and economical housing. Passive house systems have been developed with minimum energy, maximum efficiency principle and zero energy consumption, and require very low energy compared to standard building systems which can keep the interior with a quality outer shell. Passive Houses are designed with architectural, statical, mechanic, mechanical and electrical characteristics by considering many details such as heating, cooling, ventilation, lighting, air tightness, roof slope and so on, which are directed to the external facade by investigating the climatic conditions such as temperature data, dominant winds, And is expressed as an environmentally friendly building model that is separated from other ecological structures because it has its own set of standards in which electrical components are designed as a whole and quite new generation technologies and materials are used in its construction. A passive house architectural plan has been created considering the Rize climate conditions. Heat insulation, heat loss, heat gain, thermophysical properties of building components, temperature and pressure distribution in building components and annual heating energy requirement are calculated according to passive house standard account data. In this article, energy concept, renewable energy in the world and Turkey, energy efficiency and 797
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
buildings, energy efficient building design parameters, passive houses and passive houses are compared with standard houses in Rize climate conditions. In the conclusion, it is emphasized that it is necessary to develop and widen the architectural understanding which is environmentally sensitive, minimum energy, less energy consuming with the principle of maximum efficiency, in the name of a beautiful and livable future. Key words: Passive house, Heating, Cooling, Insulation, Energy, Rize climate.
798
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Güneş ve Rüzgâr Enerjisi Teknolojilerinin İncelenmesi Ve Rize İline Uygulanabilirliklerinin Değerlendirilmesi Salih LAKA1,*, İsmail ilke KÖSE2 Recep Tayyip Erdoğan Üniversitesi, Teknik Bilimler M.Y.O,Rize, Türkiye Süleyman Demirel Üniversitesi, Yalvaç Teknik Bilimler M.Y.O,Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2
Özet Günümüzde artan enerji talebi, dünya üzerindeki fosil ( kömür, petrol, doğalgaz gibi ) kaynakların hızla tükenmesine neden olmaktadır. Fosil enerji kaynaklarının günümüzde giderek azalması ve birçok enerji kaynağının ise tükenme noktasına gelmesi insanları yeni enerji arayışlarına yönlendirmiştir. Bu sebeple yenilenebilir enerji kaynaklarının kullanımını önem kazanmıştır. Bu yüzden, son yıllarda dünya ülkeleri enerji bağımsızlıklarını sağlayabilmek için enerji üretim oranları arasında yenilenebilir enerjinin payını arttırmaya çalışmaktadır. Bu artış ile birlikte tükenmez, temiz ve sürdürülebilir olan yenilenebilir enerji kaynaklarının gelişmesine önemli katkılar sağlanmıştır. Güneş ve rüzgâr enerjisi santralleri temiz ve yenilenebilir özellikleriyle günümüz şartları için önemli enerji üretim tesislerinden biri durumundadır. Bu çalışmada, yenilenebilir enerji kaynaklarından olan güneş ve rüzgâr enerji kaynaklarının Rize ilinde potansiyelleri ve uygulanabilirlikleri ile çevresel ve ekonomik katkıları incelenmiştir. Çalışma sonunda; Rize ilinin, yüksek dağlık alanlarında rüzgâr enerji santrali kurulumu için gereken koşulları sağladığı için rüzgâr enerji santrali kurulmasına uygun olduğu, ilin güneş ve nem değerlerinin yüksek olması sebebiyle güneş enerjisi santralleri kurulumu için de koşullarının uygun olduğu ve elektrik üretim ve tüketimini karşılayabilecek, önemli potansiyele sahip olduğu ortaya konulmuştur. Anahtar kelimeler: Güneş Enerjisi, Rüzgar Enerjisi, Elektrik Üretim-Tüketim.
799
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Investigation of Solar and Wind Energy Technologies and Evaluation of Applicabilitiy of Rize Salih LAKA1,*, İsmail ilke KÖSE2 Recep Tayyip Erdoğan Üniversitesi, Teknik Bilimler M.Y.O,Rize, Türkiye Süleyman Demirel Üniversitesi, Yalvaç Teknik Bilimler M.Y.O,Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2
Abstract Increasing energy demand today causes the fossil resources (coal, oil, natural gas) on the world to be consumed rapidly. Fossil energy sources are increasingly declining nowadays, and many energy sources reach the exhaustion point, leading people to search for new energy. For this reason, the use of renewable energy resources has gained importance. So, in recent years, world countries have been trying to increase the share of renewable energy among energy production rates in order to be able to provide energy independence. With this increase, significant contributions have been made to the development of renewable energy sources which are inexhaustible, clean and sustainable. Solar and wind energy plants are one of the important energy production facilities for today's conditions with their clean and renewable characteristics. In this study, the potentials and applicability of solar and wind energy sources from renewable energy sources in Rize province and their environmental and economic contributions have been examined. At the end of study; Rize proves that it is suitable for the establishment of a wind power plant because it provides the conditions for the establishment of a wind power plant in high mountainous areas and because it has a high solar and humidity value, it has a great potential to meet solar power plant installation conditions and meet electricity generation and consumption. Key words: Solar Energy, Wind Energy, Electricity Generation-Consumption.
800
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Kovada Gölü Zooplanktonunun Mevsimsel ve Ekolojik Olarak İncelenmesi Ömer ERDOĞAN1,*, Ömer Osman ERTAN2, Abdullah SAVAŞ Süleyman Demirel Üniversiesi Yalvaç Teknik Bilimler Meslek Yüksek Okulu 2 Süleyman Demirel Üniversiesi Eğirdir Su Ürünleri Fakültesi
1
Özet Isparta İli’nin önemli yüzeysel su kaynağı olan Kovada Gölü Eğirdir ilçesi Eğirdir Gölü’nün 8 km güneyinde, kuzey-güney doğrultusunda yer alır. Çalışmamızda Kovada Gölü’nden 4 istasyondan zooplankton örneklemesi yapılmıştır. Kovada Gölü nde yapılan bu araştırma sonucunda Rotifera dan 22, Claodocera dan 6 ve Copepoda dan 3 tür olarak üzere toplam 31 tür tespit edilmiştir. Kovada Gölü zooplanktonun tür ve yoğunluk açısından dağılımı incelendiğinde Rotiferanın hem tür sayısı hem de yoğunluk olarak baskın grup olduğu görülmektedir. Bu grubu sırasıyla Cladocera ve Copepoda grubu izlemektedir. Kovada Gölü’nde en yüksek zooplankton yoğunluğu yaz mevsiminde 243353,2 org/m3 en düşük ise kış mevsiminde 62132,8 org/m3 olarak belirlenmiştir. Çalışmamızda öncesinde yapılan çalışmalarla karşılaştırıldığında daha az tür ve yüksek yoğunluğun bulunması çalışmanın mevsimsel olarak yapılmasının yanında zaman içinde gölün ötrofik karektere gidişinden dolayı kaynaklanabileceği düşünülmektedir. Bu çalışma 2209 üniversite öğrencileri yurt içi / yurt dışı araştırma projeleri destekleme programı ile Tübitak tarafından desteklenmştir. Anahtar kelimeler: Kovada, Zooplankton, Ekoloji.
801
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Seasonal and Ecological Investigation of Zooplankton in Kovada Lake Ömer ERDOĞAN1,*, Ömer Osman ERTAN2, Abdullah SAVAŞ Süleyman Demirel Üniversiesi Yalvaç Teknik Bilimler Meslek Yüksek Okulu 2 Süleyman Demirel Üniversiesi Eğirdir Su Ürünleri Fakültesi
1
Abstract Kovada Lake, an important surface water source of Isparta Province, lies in the northsouth direction, 8 km south of Egirdir Lake, Eğirdir District. In our work, zooplankton sampling was done from 4 stations in Kovada Lake. As a result of this research carried out on Lake Kovada, a total of 31 species were identified as 22 species from Rotifera, 6 species from Claodocera and 3 species from Copepoda. When the distribution of zooplankton species and density in Kovada Lake is examined, it is seen that the rotifer is the dominant group as both the number of species and the density. This group is followed by Cladocera and Copepoda groups respectively. The highest zooplankton density in Lake Kovada is determined as 243353.2 org / m3 in summer and 62132.8 org / m3 in winter. Compared with the previous studies, it is thought that there are less species and higher density in our study, due to the eutrophic charecteristic trend of the lake over time as well as seasonal study. This study was supported by TUBITAK with 2209 university students' support program for national / international research projects. Key words: Kovada, Zooplankton, ecology.
802
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Ortak Mallar ve Ekolojik Sürdürülebilirlik Erhan ÇELİK1,*, İsa SAĞBAŞ2 Afyon Kocatepe Üniversitesi, Afyon, Türkiye Afyon Kocatepe Üniversitesi, Afyon, Türkiye *Sorumlu yazar e-posta:
[email protected] 1 2
Özet Göl, sulama sistemi, avlanma sahası, balık rezervi, ormanlar, meralar ya da atmosfer gibi insan eliyle yapılmış veya doğal alan ve yararlananları kullanımından dışlamanın zor olduğu, bir kişinin tüketiminin diğer kişiye düşen payda azalma meydana getirdiği kaynaklar ortak mallar olarak adlandırılmaktadır. Ayrıca ortak mal özelliği taşıyan mallara balıkçılık, yaban hayatı, yeryüzü ve yer altı suları da ilave edilebilir. Sürdürülebilirlik ise bugünün ihtiyaçlarını karşılarken doğal kaynakları korumayı ve gelecek nesillere iyi bir çevre bırakmayı hedefleyen bir gelecek stratejisidir. Elinor Ostrom, nobel ekonomi ödülünü kazanan ilk kadın bilim insanı olmuştur. “Governing The Commons” adlı ödüllü eserinde ortak malların yönetimi ve ortakların trajedisi sorununa farklı bir bakış açısı katmıştır. Ortak mallar konusunda dünyanın farklı bölgelerinde araştırma yapan Ostrom Türkiye’de ise Alanya ve Bodrum’da araştırmalar yapmıştır. Alanyalı balıkçılar ortak mal niteliği taşıyan denizdeki balıkların tükenmemesi için kendi aralarında toplanıp anlaşmışlardır. Anlaşmaya göre avlanma sahası üye sayısı kadar bölgeye ayrılacak, oylama sistemi ile bölgeler üyelere dağıtılacak ve üyelerin avlanma sahası bölge bölge her gün değişecektir. Böylece avlanma sahasının kullanımında eşitlik amaçlanmaktadır. Anlaşmanın getirdiği bu sistem sayesinde uzun vadede denizdeki balıkların tükenmesi engellenecek ve ekolojik sürdürülebilirlik sağlanmış olacaktır. Bu çalışmada, Alanya’da balık rezervinin kullanımı ve Sinop şehir içi trafik yönetimi analiz edilmiştir. Bulgular, ortak malların piyasa aktörleri tarafından başarılı bir şekilde yönetilmesinin ve korunmasının ekolojik sürdürülebilirliğe önemli katkılar sunduğunu göstermektedir. Anahtar kelimeler: Ortak Mallar, Ekolojik Sürdürülebilirlik, Elinor Ostrom.
803
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Common Goods and Ecological Sustainability Erhan CELIK1,*, Isa SAGBAS2 1
Afyon Kocatepe University, Afyon, Turkey Afyon Kocatepe University, Afyon, Turkey *Responsible author e-mail:
[email protected] 2
Abstract The common resources are the resources that a person consumes in order to reduce the share of the other person, which is difficult to exclude from the use of man made or natural areas and beneficiaries such as lake, irrigation system, hunting area, fish reserve, forests, meral or atmosphere. In addition, commodity-specific falconry, wildlife, earth and underground waters can be added. Sustainability is a future strategy that meets today's needs while protecting natural resources and leaving a good environment for future generations. Elinor Ostrom became the first female scientist to win the Nobel Prize in Economics. In his award-winning work "Governing The Commons," she has given a different perspective to the management of common goods and the tragedy of their partners. Ostrom has been conducting research in different regions of the world on common goods and has conducted research in Alanya and Bodrum. Alanya fishermen gathered and agreed between themselves to consume the fish in the sea carrying common property. According to the agreement, the region will be allocated to the number of hunting area members, the region will be distributed to the members with the voting system and the region where the members will be hunted will change every day. Thus, equality in the use of hunting area is aimed. With this system, the long term fishing will be prevented and the ecological sustainability will be ensured. In the cases of fish reserve in Alanya and Sinop city traffic management were analyzed. The findings show that successful management and conservation of common goods by market actors has made significant contributions to ecological sustainability. Key words: Common Goods, Ecological Sustainability, Elinor Ostrom.
804
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Kentlerin Tarihsel Sürdürülebilirliğinde Kültürel Miras: Önemi ve Değeri Üzerine Düşünmek Nilüfer NEGİZ1,* SDÜ İİBF SBKY Bölümü Öğretim Üyesi Sorumlu yazar e-posta:
[email protected] 1
*
Özet Kentler insanoğlunun yerleşik hayata geçişiyle karşımıza çıkarlar. Bu yönüyle tarihsel süreçte insanlığın kültürel, sosyal, ekonomik ve siyasal gelişime ayna tutarlar. İnsanoğlunun topluluktan toplum olabilmesi, o toplumu düzenli bir sistem içinde yönetebilmesi, toplumun ihtiyaçları doğrultusunda teknoloji keşfi ve geliştirmesi insanlık tarihi içinde önemli bir hafızadır. Ve bu hafıza kentlerde olup bu nedenle kültürel miras olarak korunması gerekmektedir. Kentlerin tarihi, kentlerin kimliğini oluşturması açısından önemlidir. Bu nedenle kentlerin tarihinin korunması ve sürdürülebilirliği, o kentin kimliğinin korunmasına ve gelişimine katkı sağlar. Çalışmada kültürel miras konusu kent temeli üzerinden ele alınarak, konunun önemi ve değeri üzerinden bir tartışma yapılacaktır.
805
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Cultural Heritage In Historical Sustainability Of Cities: Thinking About Importance And Value Nilüfer NEGİZ1,* SDÜ İİBF SBKY Bölümü Öğretim Üyesi Responsible author e-mail:
[email protected] 1
*
Abstract Cities come out against humanity with a settled passion. With this aspect, the cultural, social, economic and political development of humanity mirrors the historical process. Human beings can be society from community, to be able to manage that society in a regular system, discovery and development of technology in line with the needs of society is an important memory in human history. And this memory is in the cities so that ıt needs to be protected as a cultural heritage. The history of the cities are essential in creating the identity of a city. This is why the conservation and sustainability of history of the cities contribute to the preservation of that city’s identity and development. The topic of cultural heritage in the study is addressed through urban foundation a discussion will be held on the importance and value of this subject.
806
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Multı-Crıterıa Decısıon-Makıng For Selectıon of Envıronmentally Frıendly Supplıer Sukran SEKER1,* Department of Industrial Engineering, Yıldız Technical University, Turkey *Responsible author e-mail:
[email protected]
1
Abstract Supplier evaluation is the main step of selecting appropriate suppliers, which is very important to the performance of supply chain operations. The traditional evaluation criteria of supplier selection were consisted generally from cost, quality, and service perspectives. Many economic and environmental criteria must be considered in the decision process for selecting the most suitable suppliers. With the increasing environmental awareness, choosing environment friendly suppliers have begun to come into prominence in supplier evaluation and selection. To deal with the negative impacts of the industrial processes, supplier selection must be seen as a crucial part of the green supply chain management due to its long term acts. In this research, an operational model including integration of general and environmental criteria is introduced for environmentally friendly supplier selection criteria. Multi-Criteria Decision Making (MCDM) has been one of the fastest growing problem areas in many disciplines. The central problem is how to evaluate a set of alternatives in terms of a number of criteria. This paper proposes a Multi Criteria Decision Method (MCDM) to address the real-world problem of environmentally friendly supplier selection, based on prospect theory. Key words: Environmentally friendly supplier, Decision making, MCDM.
807
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Multı Crıterıa Decısıon Makıng For Selectıon of Renewable Energy Sources Sukran SEKER1,* Department of Industrial Engineering, Yıldız Technical University, Turkey *Responsible author e-mail:
[email protected]
1
Abstract Renewable energies are well-known as one of the most important energy resources. A rising awareness of renewable energy sources is growing rapidly in many developed and developing countries. However, Multiple factors that affect the success of a Renewable Energy (RE) project and these factors must be analyzed and taken into account. From this perspective, multi-criteria analysis seems to be a suitable tool to merge and analyze all point of views concerned with the decision making process, by evaluating a relationship between all alternatives and factors that influence the decision. Thus, Multi Criteria Decision Methods (MCDM) are widely used in problems within the (RE) industry. MCDM can be an alternative to support decision and decision makers in their decision process. Therefore, an extensively used multi criteria decision making tool Fuzzy Analytic Hierarchy Process (FAHP) can be utilized as an approach for RE project selection problem. This study proposes FAHP to demonstrate the most fit RE project among several renewable energy alternatives in manufacturing industry. The results of this paper display the capability and effectiveness of the proposed model in selecting the most appropriate renewable energy option among the existing alternatives. Key words: Decision making, Renewable Energy, MCDM.
808
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sağlık Kurumlarında Kalite Yönetim Algısının Sürdürülebilirliğinin Kültürel Açıdan Karşılaştırılması: IRAK-TÜRKİYE Örneği Fıras Imad Ali AL SHUBAKIE1, Pınar GÖKTAŞ1,* 1Süleyman Demirel Üniversitesi, Isparta, Türkiye *Sorumlu yazar e-posta:
[email protected]
Özet Sağlık kuruluşları, dünyanın birçok bölgesinde kalite iyileştirme amacıyla Toplam Kalite Yönetiminin (TKY) uygulanmasını sağlamaya çalışmaktadır. Sağlık çalışanlarının Toplam Kalite Yönetimi konusundaki algılarının değerlendirilmesi, Toplam Kalite Yönetimi sürecinin dizaynı, uygulanması, değerlendirilmesi ve sürdürülmesinde yardımcı olabilmektedir. Bu çalışmada Irak ve Türkiye’de sağlık kurumları işletmelerinde Toplam Kalite Yönetimi anlayışı çerçevesinde hastanelerde, hizmet kalite sürdürülebilirliğinin nasıl sağlandığı, çalışanların kalite beklenti ve ihtiyaçlarının ne derece karşılandığı, çalışanların yönetime ne ölçüde katılabildiği ve bunların ışığında hastane çalışanlarının kalite konusunda algılarının belirlenmesi amaçlanmaktadır. Dolayısıyla Irak ve Türkiye’de kültürel açıdan sağlık kurumları işletmelerinde çalışanların Toplam Kalite Yönetimi algısının sürdürülebilirliği hususunda öneriler getirilmiştir. Bu doğrultuda Irak- Selahaddin Şehri Samarra hastanesi ve Isparta Devlet hastanesinde çalışanlara anket yöntemi uygulanarak bu hastanelerde çalışanların Toplam Kalite Yönetimi’nin planlanması, uygulanması, başarıya ulaşması ve sürdürülebilirliğiyle ilgili algıları değerlendirilmiştir. Al-Assaf ve Gentling (1999)’in Amerika Birleşik Devletlerindeki sağlık kuruluşunda (Veterans Affairs Medical Centers) çalışan üst düzey yöneticilerin TKY konusundaki algılarının araştırıldığı çalışmada kullanılan anketin Songül Doğan ve Sıdıka Kaya (2004) tarafından Türkçe’ye çevrilmiş hali kullanılmıştır. Anket iki bölümden oluşmakta olup birinci bölüm, çalışmaya katılanların demografik bilgilerini içermekte, ikinci bölüm ise Toplam Kalite Yönetimi ile ilgili 25 ifadeden oluşmaktadır. Araştırma bulgularına göre; hemen hemen her değişkende Isparta Devlet Hastanesi çalışanlarının sorulara verdikleri cevapların frekans ortalaması, Samarra Devlet Hastanesi çalışanlarının ortalamalarından daha yüksektir. Bunun pek çok sebebi olabilir. Irak’ta yaşanan mevcut siyasi sorunlar ve iç çatışmalar nedeni ile her ne kadar kalite çalışmaları önemli görülse de, sürdürülebilirlik sağlanamamakta ve öncelik Hizmet Verme eğilimindedir. Yani hizmet veriyor olmak, kalite çalışmalarından daha öncelikli olarak görülüyor olabilir. Bir diğer etken ise, Türkiye’de aktif bir şekilde uygulanan kalite çalışmaları ile beraber aynı zamanda teknik alt yapının Irak’ta sahip olunan alt yapıya nazaran daha zengin olması olarak görülebilir. Öneriler; kalitenin sürdürülebilirliği açısından personelin sürekli eğitim alarak gerekli bilgi ve becerilere sahip olması, üst yönetimin desteği sayesinde eğitim ile hizmet kalitesinin sürekliliği ve veriminin artışının sağlanacağı düşünülmektedir. Bu çalışma Süleyman Demirel Üniversitesi Sosyal Bilimler Enstitüsü İNSAN KAYNAKLARI YÖNETİMİ BAĞLAMINDA SAĞLIK KURUMLARINDA KALİTE YÖNETİM ALGISININ KARŞILAŞTIRILMASI: IRAK-TÜRKİYE ÖRNEĞİ adlı yüksek lisans tezinden türetilmiştir.
809
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY Anahtar kelimeler: İnsan Kaynakları Yönetimi, Toplam Kalite Yönetimi, Sağlık Kurumları İşletmeleri. Sürdürülebilirlik
810
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Cultural Comparıson of the Sustaınabılıty of Qualıty Management Perspectıve in Health in Health Care Organızatıons: IRAQ-TURKEY Example Fıras Imad Ali AL SHUBAKIE 1, Pınar GÖKTAŞ 1,* 1 1
Suleyman Demirel University, Isparta, Turkey *Responsible author e-mail:
[email protected]
Abstract Healthcare organizations are trying to implement Total Quality Management (TQM) for quality improvement in many parts of the world. The assessment of the perceptions of the health professionals about the Total Quality Management can help in the design, implementation, evaluation and sustainability of the Total Quality Management process. In this study, it is aimed to determine how the service quality sustainability is provided, the quality expectations and needs of the employees are improved, the employees can participate in the management and the perception of the quality of the hospital employees in line with these in the framework of Total Quality Management concept in the healthcare institutions in Iraq and Turkey. Therefore, proposals have been made for the sustainability of the perception of Total Quality Management of workers working in healthcare institutions in Turkey, culturally in healthcare institutions. In this direction, the questionnaire method was applied to employees in Iraq-Saladin City Samarra Hospital and Isparta State Hospital to evaluate the perceptions of the total quality management of these hospitals regarding planning, implementation, success and sustainability. Surveys conducted by Al-Assaf and Gentling (1999) of senior managers working in Veterans Affairs Medical Centers in the United States investigated the perceptions of TQM subjects using the Turkish version translated by Songül Doğan and Sıdıka Kaya (2004). The questionnaire consists of two parts, the first part contains the demographic information of the participants and the second part consists of 25 statement related to Total Quality Management. According to research findings; the frequency averages of the answers of the employees of Isparta State Hospital to the questions are higher than the average of the employees of Samarra State Hospital. There can be many reasons for this. Although quality work is important with the current political problems and internal conflicts in Iraq, sustainability is not achieved and priority is given to service. So being serviceable may be seen as a priority over quality work. Another factor can be seen as the quality work that is actively applied in Turkey and at the same time the technical infrastructure is richer than the infrastructure in Iraq. Recommendations; it is thought that the personnel will have the necessary knowledge and skills by receiving continuous education in terms of quality sustainability and that the continuity and efficiency of education and service quality will be increased thanks to the support of top management. Key words: Human Resources Management, Total Quality Management, Health Care Organizations, Sustainability.
811
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Havalimanı Karbon Akreditasyonu Süreci Uygulamalarının İyileştirilmesinde Hata Türü ve Etkileri Analizinin Kullanılması Üzerine Bir Araştırma Pınar GÖKTAŞ1,*, Cenk ÖZLER2 Süleyman Demirel Üniversitesi, Isparta, Türkiye Dokuz Eylül Üniversitesi, İzmir, Türkiye *Sorumlu yazar e-posta:
[email protected] 1
2
Özet Günümüzde iklim değişikliği ve küresel ısınma Dünya’yı tehdit eden sorunların başında yer almaktadır. İklim değişikliği ile mücadele için Türkiye’nin de onayladığı Birleşmiş Milletler İklim Değişikliği Çerçeve Sözleşmesi, bu kapsamda ortaya çıkan Kyoto Protokolü ve izleyen süreçler, başta iklim değişikliğine yol açan sera gazlarının salımından birinci derece sorumlu olan gelişmiş ülkeler olmak üzere dünya çapında bir eylem planı oluşturmaktadır. Türkiye açısından, ekonomik büyümeyi daha düşük karbon salımlarıyla gerçekleştirmek, gerek uluslararası yükümlülükleri, gerekse de üzerinde yaşadığımız yer küreye karşı sorumluluklar açısından önemli hale gelmiştir. Bu bağlamda küresel ısınmanın ana faktörü karbondioksit olup, şirketler karbon emisyonunu azaltmak istemektedir. Sera gazı emisyonlarının önümüzdeki yıllarda artacak olmasına rağmen, temel amaç 2050 yılında 1990 yılındaki emisyon seviyesinin %80 altına inilmesidir. Çalışmanın amacı, havacılık sektöründe karbon emisyonunu azaltmayı hedefleyen bir programa kalite geliştirme yöntemini adapte ederek, bu programların daha etkin nasıl yürütülebileceğini ortaya koymak, şirketlerin karbon envanteri oluşturmasına yardımcı olmak, havalimanı karbon akreditasyon sürecindeki uygulamalarını incelemek ve iyileştirme önerileri sunmaktır. Bu bağlamda TAV İzmir Adnan Menderes Havalimanı’nda karbon emisyonu nedenlerinin incelenmesi için Hata Türü ve Etkileri Analizi (HTEA) uygulanmıştır. Hata Türü ve Etkileri Analizi’ne (HTEA) göre riskler dikkate alınmış ve iyileştirme önerileri sunulmuştur. Şimdiye kadar karbon akreditasyon sürecinin iyileştirilmesi amacıyla bu yöntemin kullanılması örneklerine literatürde rastlanılmaması çalışmanın önemini artırmaktadır. Çalışmadan elde edilen bulgulara göre, TAV İzmir’de karbon emisyonuna etki eden en önemli nedenlerden bazıları sırasıyla şunlardır: Chiller Soğutma Grubu ve ısıtma grubunun gereğinden fazla çalışması, klimaların filtresinin tıkanması ve rulman arızası, sıcak su kazanı brülör arızası gibi. Öneriler; sürecin sistematik olarak gözden geçirilmesinin sağlanarak zayıf yanların tespit edilmesi, karbon emisyonuna etki eden nedenler ve kritik noktaların belirlenmesi, HTEA takımı oluşturularak takım çalışması ile şirket içi iletişimin geliştirilmesi, personel eğitimidir.
812
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Bu çalışma Dokuz Eylül Üniversitesi Sosyal Bilimler Enstitüsü tarafından yayınlanan “Havalimanı Karbon Akreditasyonu Süreci Uygulamalarının İyileştirilmesinde Hata Türü ve Etkileri Analizinin Kullanılması Üzerine Bir Araştırma” başlıklı yüksek lisans tezinden üretilmiştir. Anahtar kelimeler: Sera Gazı Etkisi, Sera Gazı Protokolü, Havalimanı Karbon Akreditasyon Programı, Karbon Emisyonu, Hata Türü ve Etkileri Analizi, Karbon Ayak İzi.
813
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
A Research on Usıng Faılure Modes and Effects Analysıs To Improve Aırport Carbon Accredıtatıon Process Applıcatıons Pınar GÖKTAŞ1,*, Cenk ÖZLER 2 1
Suleyman Demirel University, Isparta, Turkey 2 Dokuz Eylul University, Izmir, Turkey *Responsible author e-mail:
[email protected]
Abstract Today, climate change and global warming are at the beginning of problems that threaten the world. The United Nations Framework Convention on Climate Change, which Turkey has endorsed to tackle climate change, is building a worldwide action plan, including the Kyoto Protocol and subsequent processes, developed countries that are primarily responsible for the release of greenhouse gases, leading to climate change. In terms of Turkey, achieving economic growth with lower carbon emissions has become important both in terms of international obligations and responsibilities towards the place where we live. In this context the main factor of global warming is carbondioxide, companies wants to reduce carbon emission. Although GHG emission will be increase incoming year, the aim in 2050 to reduce emission levels by 80 percent of what they were in 1990. The aim of this study is to advise on how to implement these programs more effectively by adapting a program quality improvement method aimed at reducing carbon emissions in the aviation sector, helping companies to create carbon inventory, examining airport carbon accreditation practices and proposing improvements. In this context, Failure Modes and Effects Analysis (FMEA) has been done to investigate causes of carbon emission in TAV Izmir Adnan Menderes Airport. According to Failure Modes and Effects Analysis (FMEA), risks were considered and suggestions for improvement were offered. Until now, in order to improve carbon accreditation process by using this method is not documented in the literature. According to findings in this study; some of the most important reasons for the carbon emissions in TAV İzmir are as follows: Chiller Cooling Group and the heating group work too hard, blockage of the air conditioner filter and bearing malfunction, hot water boiler burner malfunction. Recommendations; determining the causes and critical points affecting carbon emission, developing team communication and internal communication with FMEA team and personnel training. Key words: Greenhouse Gas Effect, GHG Protocol, Airport Carbon Accreditation Scheme, Carbon Emission, Failure Modes and Effects Analysis, Carbon Footprint.
814
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Tekstil ve Modada Sürdürülebilirlik Özgün CAN1, Kartal Murat AYVAZ2 Süleyman Demirel Üniversitesi, Isparta, Türkiye 2 Selçuk Üniversitesi, Konya, Türkiye *Sorumlu yazar e-posta:
[email protected]
1
Özet Sanayileşme, nüfus artışı, teknolojik gelişmeler, küreselleşme gibi dünya tarihinde meydana gelmiş olan önemli kırılmalar sebebiyle üretim ve tüketim artmış ve bunun sonucunda sınırsız görülen doğa, çevre, hayvanlar ve bitkiler, insanın işini görüp, ona fayda sağladıktan sonra yok olmasında sakınca görülmeyen metalar haline gelmiştir. Son gelinen noktada sadece çevre, doğa değil insan sağlığı ve insani/ toplumsal kıymetler de hoyratça kullanılır bir hal almıştır. Hızlı tüketim kültürü ise doğanın sınırlı kaynakları ve ekosistemi üzerinde olumsuz etkilere sahiptir. Mevcut dünya düzeni sebebiyle kaynaklar hızla tükenmekte, doğa yok olmakta, insan sağlığı giderek bozulmakta ve birçok ekonomik, ekolojik, sosyal problem oluşmaktadır. Bunların yanında; üretimlerde bol miktarda su ve kimyasal madde kullanılması, kaynakların sınırsızmış gibi kullanılıp atıkların doğaya terk edilmesi; su, hava, toprak gibi hayati kaynaklara zarar vermekte ve dünyanın sürdürülebilirliğine olumsuz etki etmektedir. Kalkınmanın ekonomik gelişimler sağlıyor olması onun ortaya çıkardığı küresel boyuttaki sorunları göz ardı etmemize yeter sebep değildir. İnsanın en önemli ihtiyaçları olan giysi, aksesuar, ev tekstili gibi ürünlerin üretimini sağlayan Tekstil/ Moda sektörü de insan ve çevre sağlığı gözetilerek devam etmek zorunda olan sürdürülebilir kalkınmaya ekolojik etik çerçevesinde yaklaşmalıdır. Sektörde hem üretim esnasında kullanılan malzemeler, kimyasal maddeler hem de doğal kaynaklar mümkün olduğunca asgari düzeyde kullanılmak zorundadır. Sürdürülebilir Moda, Eko Moda Yeşil Hareketler, Yavaş Moda, Yavaş Tasarım gibi yaklaşımlar dünyanın yaşamış olduğu problemlere bir tepki olarak ortaya çıkmıştır. Sürdürülebilirlik, Tekstil/ Moda Sektörü için de oldukça önemli bir konumdadır. Tekstil ürünlerinin doğal lifler ve maddelerle üretilmesi, kullanım ömrünün daha uzun olması ve geri dönüşümünün sağlanabilmesi sürdürülebilirlik açısından önemlidir. Bu araştırmada sürdürülebilirlik; ekolojik açıdan incelenmiştir. Çalışma genel olarak sürdürülebilir moda, ekolojik moda kavramları ile irtibatlı olarak sürdürülmüştür. Araştırmada, Tekstil/ Moda sektörüne ekolojik açıdan yaklaşarak üretici, tüketici ve araştırmacılar açısından farkındalık uyandırılmak, sürdürülebilir modaya dikkat çekmek, sürdürülebilir kalkınmaya katkı sağlamak amaçlanmıştır. Anahtar kelimeler: Sürdürülebilirlik, Sürdürülebilir Moda, Eko Moda, Ekolojik Moda, Geri Dönüşüm.
815
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
Sustainability in Textile and Fashion Özgün CAN1, Kartal Murat AYVAZ2 Süleyman Demirel Üniversitesi, Isparta, Türkiye 2 Selçuk Üniversitesi, Konya, Türkiye *Responsible author e-mail:
[email protected] 1
Abstract As a result of significant breaks in world history such as industrialization, population growth, technological developments and globalization, production and consumption have increased, and as a result, nature, environment, animals and plants, which are seen as unlimited, become commodities that do not cause harm to the people after seeing and benefiting. At the last point, not only the environment, but also human health and human / social values have been used hogly. Rapid consumption culture has negative effects on nature's limited resources and ecosystem. Due to the current world order, resources are rapidly depleted, nature disappears, human health gradually deteriorates, and many economic, ecological and social problems arise. Besides these; Abundant amounts of water and chemicals used in production; It damages vital resources such as water, air, soil, and adversely affects the sustainability of the world. The fact that development provides economic development is not sufficient reason to ignore the global problems that it presents. The Textile / Fashion sector, which provides the production of products such as clothes, accessories, home textiles, which is one of the most important needs of man, should approach ecological ethics to sustainable development which has to continue considering human and environmental health. Materials, chemical materials and natural resources that are used during production in the sector have to be used as minimum as possible. Sustainable Fashion, Eco-Fashion Green Movements, Slow Fashion, Slow Design have emerged as a response to the problems that the world has experienced. Sustainability is also a very important position for the Textile / Fashion Sector. It is important for textile to be able to produce natural fibers and materials, to have a longer service life and to achieve recycling, in terms of sustainability. Sustainability in this research; Ecologically. In general, sustainable fashion has been maintained in connection with the concepts of ecological fashion. In the research, it was aimed to raise awareness in terms of producers, consumers and researchers, draw attention to sustainable fashion and contribute to sustainable development by approaching the Textile / Fashion sector from an ecological point of view. Key words: Sustainability, Sustainable Fashion, Eco-Fashion, Ecological Fashion, Recycling.
816
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
817
International Congress of the New Approaches and Technologies for Sustainable Development September 21-24, 2017 Isparta / TURKEY
818