Vapour phase corrosion protection. For use as an additional store of active agent in large packages in order to protect the core volume that cannot be protected by the agent-impregnated film. PACKER'S VCI-Depot provides reliable protection for steel, iron, aluminium and chrome; please check the effectiveness of the protection in advance if you are planning to use this product with grey cast-iron and magnesium. The distance to the material to be protected should not exceed 30 cm. The optimum level of protection is achieved when the foam is freely suspended and not in contact with the packaged goods. For large packages, the protective VCI atmosphere builds up in approx. 24 hours.
Specifications/Technical data Material:
open pore PU-foam cut into 1000x250 mm sections
Mass per unit area:
approx. 171 g / m
Requirement:
standard calculation, 1 section of 1000x250 mm per 1 m of interior volume
2 3
(influenced by additional packaging materials and climatic conditions during transportation and storage) Application:
during long interruptions to work, protect against gas release; after removal of the goods, close the packaging used during shipping.
Material certificates (The film complies with the following specifications) TL 8135-0043 Appendix 1
Test of the corrosion protection properties of a VCI foam (BFSV, Hamburg)
FDA
Code of Federal Regulations, Food and Drugs, 21, CFR CH. I (issued on 01.04.1997) § 178 33 00
TRGS 910
Determination of N-Nitrosamines and benzol TRGS 910
Not suitable For use as cushioning material, desiccant or intermediate layer. Applications without barrier layer film.
Personal protective equipment Wear gloves. Wash hands after use. Do not eat.
Application/Protective function Specifications/Technical data Not ...
Rev.: A / Page 1 of 1 / Valid from 01.12.2013
Application/Protective function
Vapour phase corrosion protection. For use as an additional store of a...